Preparation of a diacylglycerol-enriched soybean oil by phosphalipase A1 catalyzed hydrolysis

Partial hydrolysis catalyzed by phospholipase A1 (Lecitase Ultra) in a solvent free system was firstly used to produce diacylglycerols (DAGs)-enriched soybean oil. In this study, five reaction parameters namely agitation speed (100–500 rpm), reaction time (2–10 h), water content (10–50 wt% of oil mass), enzyme load (5–40 U/g of oil mass), and reaction temperature (30–70 °C) were investigated. The reaction was up-scaled to 1 kg of soybean oil at 40 °C of reaction temperature, with 300 rpm of agitation speed, 40 wt% of water content, 6 h of reaction time and 22 U/g of enzyme load. Purification by molecular distillation yielded 70% DAG-enriched oil with 42.64 wt% of DAG. The composition of acylglycerols of soybean oil and the DAG-enriched soybean oil was analyzed and identified by high performance liquid chromatography (HPLC) and HPLC/electrospray ionization/mass spectrometer. The released fatty acid from the partial hydrolysis of soybean oil catalyzed by phospholipase A1 showed a higher saturated fatty acid content than that of the raw material. Compared to the lipase catalyzed process, this new phospholipase A1 catalyzed one showed the advantages of low amount production of byproduct, namely, monoacylglycerols.     

Enzymatic synthesis of phenolic lipids in solvent-free medium using flaxseed oil and 3,4-dihydroxyphenyl acetic acid

The enzymatic synthesis of phenolic lipids (PLs) by transesterification of flaxseed oil with 3,4-dihydroxyphenyl acetic acid (DHPA) was investigated in solvent-free medium (SFM), using Novozym 435 from Candida antarctica as the biocatalyst. The effects of selected reaction parameters, water activity (a_w), enzyme concentration and agitation speed, were studied and optimized. Increasing the a_w of the reaction mixture from 0.18 to 0.38 resulted in a significant increase in the bioconversion yield from 62 to 77%. APCI–MS analysis confirmed the formation of six 3,4-dihydroxyphenyl acetoylated lipids, which were monolinolenyl, dioleyl, dilinolenyl, linoleyl linolenyl, oleyl linolenyl and oleyl linoleyl dihydroxyphenyl acetates. The highest enzymatic activity (178 nmol of PLs/g solid enzyme/min) was obtained using 40 mg of solid enzyme (400 PLU)/mL at agitation speed 150 rpm. Using the optimized conditions, the phenolic lipids showed a high relative proportion of linolenic acid (C_18:3 n?3) that increased from 57% in the flaxseed oil to 75 and 64% in the produced phenolic mono- and diacylglycerols, respectively. In addition, the synthesized phenolic lipids demonstrated a 7.2-fold lower radical scavenging activity than that of DHPA but half that of α-tocopherol.     

Two-step acid and alkaline ethanolysis/alkaline peroxide fractionation of sugarcane bagasse and rice straw for production of polylactic acid precursor

Sugarcane bagasse and rice straw were subjected to acid and alkaline ethanolysis and sequential enzymatic hydrolysis to produce glucose for lactic acid production. Influence of physico-chemical treatments using ultrasonic bath and ultrasonic probe was studied compared with mechanical stirring. The results showed that the highest glucose yield with least contamination of xylose was obtained from acid ethanolysis fractionation (5 N H₂SO₄ + 50%, v/v ethanol) when stirred at 90 °C for 4 h. Alkaline ethanolysis accomplished high amount of both glucose and xylose released, however it was not favorable substrate for homofermentative lactic acid bacteria. In order to enhance enzymatic hydrolysis of acid ethanolysis fractionated samples, lignin was subsequently removed by the second step alkaline/peroxide delignification. The maximum lactic acid was obtained at 23.6 ± 0.2 g/L from Lactobacillus casei fermentation after 72 h when hydrolysate from two-step acid hydrolysis and alkaline/peroxide fractionated sugarcane bagasse containing 24.6 g/L initial glucose concentration was used as substrate.     

Inhibition of cellulases by phenols

Enzyme hydrolysis of pretreated cellulosic materials slows as the concentration of solid biomass material increases, even though the ratio of enzyme to cellulose is kept constant. This form of inhibition is distinct from substrate and product inhibition, and has been noted for lignocellulosic materials including wood, corn stover, switch grass, and corn wet cake at solids concentrations greater than 10 g/L. Identification of enzyme inhibitors and moderation of their effects is of considerable practical importance since favorable ethanol production economics require that at least 200 g/L of cellulosic substrates be used to enable monosaccharide concentrations of 100 g/L, which result in ethanol titers of 50 g/L. Below about 45 g/L ethanol, distillation becomes energy inefficient. This work confirms that the phenols: vanillin, syringaldehyde, trans-cinnamic acid, and hydroxybenzoic acid, inhibit cellulose hydrolysis in wet cake by endo- and exo-cellulases, and cellobiose hydrolysis by β-glucosidase. A ratio of 4 mg of vanillin to 1 mg protein (0.5 FPU) reduces the rate of cellulose hydrolysis by 50%. β-Glucosidases from Trichoderma reesei and Aspergillus niger are less susceptible to inhibition and require about 10× and 100× higher concentrations of phenols for the same levels of inhibition. Phenols introduced with pretreated cellulose must be removed to maximize enzyme activity.     

Biotransformation of 2-phenylethanol to phenylacetaldehyde in a two-phase fed-batch system

Phenylacetaldehyde (PA) can be produced by the oxidation of 2-phenylethanol (PE) through biotransformation. In order to prevent substrate and product inhibitions and the transformation of the PA to phenylacetic acid (PAA), utilization of a two-phase system is very attractive. Gluconobacter oxydans B-72 was used as the microorganism and iso-octane as the solvent. The effect of initial substrate concentration on the PA production was investigated in single- and two-phase systems. In the single-phase system, substrate inhibition occurred above 5 g/l, and in the two-phase system, above 7.5 g/l. Substrate inhibition kinetics were also studied in the two-phase system and kinetic constants were determined as r_max=0.64 g/l min, K_M=8.15 g/l, K_PA=2.5 g/l. Because it was observed that two-phase system is insufficient to remove the substrate inhibition effect, fed-batch operation was utilised in this study. For 7.5 g/l of PE, 1.65, 3.85, and 7.35 g/l of PA were obtained in the single-phase, two-phase, and two-phase three fed-batch systems, respectively. Effect of biotransformation time, initial substrate concentration, agitation speed, and fed-batch number on the PA production was investigated in a two-phase fed-batch system by the response surface methodology (RSM). The optimum values were found as 3 fed-batch number, 2.75 g/l initial substrate concentration, 150 rpm agitation speed, and 65 min of one batch biotransformation time. In order to verify these results, an experiment was performed at these optimum conditions and 7.10 g/l of PA concentration was obtained.     

Batch culture and repeated-batch culture of Cunninghamella bainieri 2A1 for lipid production as a comparative study

This research was performed based on a comparative study on fungal lipid production by a locally isolated strain Cunninghamella bainieri 2A1 in batch culture and repeated-batch culture using a nitrogen-limited medium. Lipid production in the batch culture was conducted to study the effect of different agitation rates on the simultaneous consumption of ammonium tartrate and glucose sources. Lipid production in the repeated-batch culture was studied by considering the effect of harvesting time and harvesting volume of the culture broth on the lipid accumulation. The batch cultivation was carried out in a 500 ml Erlenmeyer flask containing 200 ml of the fresh nitrogen-limited medium. Microbial culture was incubated at 30 °C under different agitation rates of 120, 180 and 250 rpm for 120 h. The repeated-batch culture was performed at three harvesting times of 12, 24 and 48 h using four harvesting cultures of 60%, 70%, 80% and 90%. Experimental results revealed that nitrogen source (ammonium tartrate) was fully utilized by C. bainieri 2A1 within 24 h in all agitation rates tested. It was also observed that a high amount of glucose in culture medium was consumed by C. bainieri 2A1 at 250 rpm agitation speed during the batch fermentation. Similar results showed that the highest lipid concentration of 2.96 g/L was obtained at an agitation rate of 250 rpm at 120 h cultivation time with the maximum lipid productivity of 7.0 × 10⁻² mg/ml/h. On the other hand, experimental results showed that the highest lipid concentration produced in the repeated-batch culture was 3.30 g/L at the first cycle of 48 h harvesting time using 70% harvesting volume, while 0.23 g/L gamma-linolenic acid (GLA) was produced at the last cycle of 48 h harvesting time using 80% harvesting volume.     

Production of a collagenase from Candida albicans URM3622

Culture conditions (pH, time, temperature, inoculum size, orbital agitation speed and substrate concentration) for an extracellular collagenase produced by Candida albicans URM3622 were studied using three experimental designs (one 2⁶⁻² fractionary factorial and two 2³ full factorial). The analysis of the 2⁶⁻² fractionary design data indicated that agitation speed and substrate concentration had the most significant effect on collagenase production. Based on these results, two successive 2³ full factorial design experiments were run in which the effects of substrate concentration, orbital agitation speed and pH were further studied. These two sets of experiments showed that all variables chosen were significant for the enzyme production, with the maximum collagenolytic activity of 6.8 ± 0.4 U achieved at pH 7.0 with an orbital agitation speed of 160 rpm and 2% substrate concentration. Maximum collagenolytic activity was observed at pH 8.2 and 45 °C. The collagenase was stable within a pH range of 7.2–8.2 and over a temperature range of 28–45 °C. These results clearly indicate that C. albicans URM3622 is a potential resource for collagenase production and could be of interest for pharmaceutical, cosmetic and food industry.     

Effect of the aeration rate and agitation speed on β-carotene production and morphology of Blakeslea trispora in a stirred tank reactor: mathematical modeling

The effect of aeration rate and agitation speed on β-carotene production and morphology of Blakeslea trispora in a stirred tank reactor was investigated. B. trispora formed hyphae, zygophores and zygospores during the fermentation. The zygospores were the morphological form responsible for β-carotene production. Both aeration and agitation significantly affected β-carotene concentration, productivity, biomass and the volumetric mass transfer coefficient (K_La). The highest β-carotene concentration (1.5 kg m⁻³) and the highest productivity (0.08 kg m⁻³ per day) were obtained at low impeller speed (150 rpm) and high aeration rate (1.5 vvm). Also, maximum productivity (0.08 kg m⁻³ per day) and biomass dry weight (26.4 kg m⁻³) were achieved at high agitation speed (500 rpm) and moderate aeration rate (1.0 vvm). Conversely, the highest value of K_La (0.33 s⁻¹) was observed at high agitation speed (500 rpm) and high aeration rate (1.5 vvm). The experiments were arranged according to a central composite statistical design. Response surface methodology was used to describe the effect of impeller speed and aeration rate on the most important fermentation parameters. In all cases, the fit of the model was found to be good. All fermentation parameters (except biomass concentration) were strongly affected by the interactions among the operation variables. β-Carotene concentration and productivity were significantly influenced by the aeration, agitation, and by the positive or negative quadratic effect of the aeration rate. Biomass concentration was principally related to the aeration rate, agitation speed, and the positive or negative quadratic effect of the impeller speed and aeration rate, respectively. Finally, the volumetric mass transfer coefficient was characterized by the significant effect of the agitation speed, while the aeration rate had a small effect on K_La.     

Agitation,aeration and shear stress as key factors in inulinase production by Kluyveromyces marxianus

Factorial design and response surface analyses were used to optimize the production of inulinase (2,1-β-d-fructan fructanohydrolase, EC 3.2.1.7) by Kluyveromyces marxianus ATCC 16045, using sucrose as carbon source. Effects of aeration, agitation and type of impeller (disk turbine, marine, pitched blade) were studied in a batch stirred reactor. Two factorial designs 2² were carried out. Agitation speed varied from 50 to 550 rpm (revolution per minute), aeration rate from 0.5 to 2.0 vvm (air volume/broth volume·minute). It has been shown that the enzyme production was strongly influenced by mixing conditions, while aeration rate was shown to be less significant. Additionally, the increase in the agitation speed is limited by the death rate, which increases drastically at high speeds, lowering the enzyme production. Also, the impeller type has significant influence in the production, the disk impeller at 450 rpm and aeration at 1.0 vvm led to an activity of 121 UI/mL, while the pitched blade was shown to be the best impeller for this process, leading to the best production, 176 UI/mL, at 450 rpm and 1.0 vvm. The maximum shear stress for inulinase production was about 0.22 Pa, since higher values cause higher cell death rates, affecting the enzyme production. The same results were confirmed with another microorganism, which was also sensible to shear stress. Therefore, it has been concluded that in some cases, mainly when the microorganism is sensible to shear stress, the interaction between mass transfer and mechanical stress should be considered in scale up processes.     

Fermentation strategies for the production of lipase by an indigenous isolate Burkholderia sp. C20

Burkholderia sp. C20 strain isolated from food wastes produces a lipase with hydrolytic activities towards olive oil. Fermentation strategies for efficient production of this Burkholderia lipase were developed using a 5-L bench top bioreactor. Critical factors affecting the fermentative lipase production were examined, including pH, aeration rate, agitation rate, and incubation time. Adjusting the aeration rate from 0.5 to 2 vvm gave an increase in the overall lipase productivity from 0.057 to 0.076 U/(ml h), which was further improved to 0.09 U/(ml h) by adjusting the agitation speed to 100 rpm. The production of Burkholderia lipase followed mixed growth-associated kinetics with a yield coefficient of 524 U/g-dry-cell-weight. The pH optimum for cell growth and lipase production was different at 7.0 and 6.0, respectively. Furthermore, stepwise addition of carbon substrate (i.e., olive oil) enhanced lipase production in both flask and bioreactor experiments.     

Inulinase biosynthesis using immobilized mycelium of Aspergillus niger

Conidia of Aspergillus niger 20 Osm producing extracellular inulinase were immobilized on pumice stones or polyurethane sponge and used in repeated-batch processes. Some factors affecting inulinase biosynthesis by the mycelium A. niger immobilized on pumice stones were investigated. Maximal inulinase production occurred in 50 ml of medium containing 0.5 g of carrier at 30 °C, pH 6.0 and at an agitation speed of 200 rpm. This procedure enabled repeated-batch enzyme production and as many as six subsequent 24 h batches could be fermented by using the same carrier. This is the first report on inulinase biosynthesis by mycelium of A. niger immobilized on polyurethane sponge using unconventional oxygenation of culture which ensures that the dissolved oxygen concentration remains constant.     

Bioprocess development of the production of the mutant P-219-L human d-amino acid oxidase for high soluble fraction expression in recombinant Escherichia coli

In order to examine the structure–activity relationship and the substrate specificity of human d-amino acid oxidase (h.DAO), a single amino acid mutation had been established as proline-219-luecine (P-219-L). The gene encoding mutant h.DAO has been cloned and expressed in Escherichia coli BL21 (DE3). It was observed that the host cell was negatively affected by the expressed mutant h.DAO, resulting in a remarkable decrease in the cell growth and consequently the amount of the produced enzyme. To overcome this problem, we investigated several factors that may affect the cell growth rate and the mutant h.DAO production such as optimization of the glucose concentration as a main carbon source and the yeast extract concentration as a main nitrogen source, optimization of dissolved oxygen (DO%) concentration and the addition of benzyl alcohol (BA, which can artificially induce a strong heat shock response at low temperature), to enhance the production of natively folded soluble fraction of the recombinant protein. These parameters were tested on both shake flask level and fed-batch bioreactor level. The Western blot analysis and the enzyme activity assay indicated the higher level of the mutant expression towards enhancement of the conditions by using our designed approach.The specific activity (which was used as an indicator for the level of the desired protein produced = U/mg protein) and the OD_600 nm of the host cells (which was used as an indicator for the cell growth), reached to be 0.061 U/mg protein and 3.44, respectively upon using fed-batch culture system containing the optimized medium composition (15 g/l glucose and 5 g/l yeast extract). While upon using the shake flask level, these values were 0.032 and 1.1, respectively. Enhancement of the cell growth and the enzyme production was noticed after DO% optimization upon using 500 rpm agitation speed and 1.8 v.v.m. (volume volume minute) aeration. The specific activity for the mutant enzyme and the OD_600 nm of the host cells reached to be 0.14 U/mg protein and 7.1, respectively. Finally upon using the optimized culture composition (15 g/l glucose and 5 g/l yeast extract), optimized DO% (using 500 rpm agitation speed and 1.8 v.v.m.) and 0.1 mM BA at the fed-batch bioreactor level, the specific activity and the OD_600 nm of the host cells increased significantly to be 0.21 U/mg protein and 11.3, respectively at 24 h culture. These results indicate the importance of our approaches to overproducing mutant h.DAO in soluble form in E. coli.     

The effect of agitation and aeration on the synthesis and molecular weight of gellan in batch cultures of Sphingomonas paucimobilis

The effects of agitation and aeration upon synthesis and molecular weight of the biopolymer gellan were systematically investigated in batch fermenter cultures of the bacterium, Sphingomonas paucimobilis. High aeration rates and vigorous agitation enhanced growth of S. paucimobilis. Although gellan formation occurred mainly in parallel with cell growth, the increase in cells able to synthesise gellan did not always lead to high gellan production. For example, at very high agitation rates (1000 rpm) growth was stimulated at the expense of biopolymer synthesis.Maximal gellan concentration was obtained at 500 rpm agitation and either 1 or 2 vvm aeration (12.3 and 12.4 g/l gellan, respectively). An increase in aeration (from 1 to 2 vvm) enhanced gellan synthesis only at low agitation rates (250 rpm). However, high aeration or dissolved oxygen was not necessary for high gellan synthesis, in fact oxygen limitation always preceded the phase of maximum gellan production and probably enhanced polysaccharide biosynthesis.Some gellan was formed even after glucose exhaustion. This was attributed to the intracellular accumulation of polyhydroxyalkanoates, (such as polyxydroxybutyrate) which were found in S. paucimobilis cells indicating the existence of a carbon storage system, which may contribute to gellan biosynthesis under glucose-limiting conditions.The autolysis of the culture, which occurred at the late stages of the process, seemed to be triggered mainly by limitations in mass (nutrient) transfer, due to the highly viscous process fluid that gradually develops. Rheological measurements generally gave a very good near real time estimate of maximum biopolymer concentration offering the possibility of improved process control relative to time consuming gravimetric assay methods.While mechanical depolymerisation of gellan did not occur, high aeration rates (2 vvm) led to production of gellan of low molecular weight (at either 250 or 500 rpm). This effect of aeration rate upon gellan molecular weight is reported here for the first time, and is important for the properties and applications of gellan. Mechanisms which may have led to this are discussed, but control of molecular weight of the biopolymers is clearly an area needing further research.     

Characterization of enzymatic saccharification for acid-pretreated lignocellulosic materials with different lignin composition

The enzymatic saccharification of three different feedstocks, rice straw, bagasse and silvergrass, which had been pretreated with different dilute acid concentrations, was studied to verify how enzymatic saccharification was affected by the lignin composition of the raw materials. There was a quantitatively inverse correlation between lignin content and enzymatic digestibility after pretreatment with 1%, 2% and 4% sulfuric acid. The lignin accounted for about 18.8–21.8% of pretreated rice straw, which was less than the 23.1–26.5% of pretreated bagasse and the 21.5–24.1% of pretreated silvergrass. The maximum glucose yield achieved, under an enzyme loading 6.5 FPU g^?1 DM for 72 h, was close to 0.8 g glucose/g glucan from the enzymatic hydrolysis of the pretreated rice straw; this was twice that from bagasse and silvergrass. A decrease in initial rate of glucose production was observed in all cases when the raw materials underwent enzymatic saccharification with 4% sulfuric acid pretreatment. It is suggested that the higher acid concentration led to an inhibition of β-glucosidase activity. Fourier transform infrared (FTIR) spectroscopy further indicated the chemical properties of the rice straw and silvergrass become more hydrophilic after pretreatment using 2% of sulfuric acid, but the pretreated bagasse tended to become more hydrophobic. The hydrophilic nature of the pretreated solid residues may increase the inhibitive effects of lignin on the cellulase and this could become very important for raw materials such as silvergrass that contain more lignin.     

Lipolytic enzyme production by Thermus thermophilus HB27 in a stirred tank bioreactor

In this study, lipolytic enzyme production by Thermus thermophilus HB27 at bioreactor scale has been investigated. Cultivation was performed in a 5-L stirred tank bioreactor in discontinuous mode, at an agitation speed of 200 rpm. Different variables affecting intra- and extra-cellular lipolytic enzyme production such as culture temperature and aeration rate have been analysed. The bacterium was able to grow within the temperature range tested (from 60 to 70 °C) with an optimum value of 70 °C for intra- and extra-cellular lipolytic enzyme production.On the other hand, various aeration levels (from 0 to 2.5 L/min) were employed. A continuous supply of air was necessary, but no significant improvement in biomass or enzyme production was detected when air flow rates were increased above 1 L/min. Total lipolytic enzyme production reached a maximum of 167 U/L after 3 days, and a relatively high concentration of extra-cellular activity was detected (40% of the total amount). Enzyme yield was around 158 U/g cells. Moreover, it is noteworthy that the lipolytic activity obtained operating at optimal conditions (70 °C and air flow of 1 L/min) was about five-fold higher than that attained in shake flask cultures     

Valorization of olive stones for xylitol and ethanol production from dilute acid pretreatment via enzymatic hydrolysis and fermentation by Pachysolen tannophilus

Olive stones are an agro-industrial by-product abundant in the Mediterranean area that is regarded as a potential lignocellulosic feedstock for sugar production. Statistical modeling of dilute-sulphuric acid hydrolysis of olive stones has been performed using a response surface methodology, with treatment temperature and process time as factors, to optimize the hydrolysis conditions aiming to attain maximum d-xylose extraction from hemicelluloses. Thus, solid yield and composition of solid and liquid phases were assessed by empirical modeling. The highest yield of d-xylose was found at a temperature of 195 °C for 5 min. Under these conditions, 89.7% of the total d-xylose was recovered from raw material. The resulting solids from optimal conditions were assayed as substrate for enzymatic hydrolysis, while fermentability of hemicellulosic hydrolysates was tested using the d-xylose-fermenting yeast Pachysolen tannophilus. Both bioprocesses were considerably influenced by enzyme loading and inoculum size. In the enzymatic hydrolysis step, about 56% of cellulose was converted into d-glucose by using an enzyme/solid ratio of 40 FPU g⁻¹, while in the fermentation carried out with a cell concentration of 2 g L⁻¹ a yield of 0.44 g xylitol/g d-xylose and a global volumetric productivity of 0.11 g L⁻¹ h⁻¹ were achieved.     

Hydrolysis of starch particles using immobilized barley α-amylase

Barley α-amylase has been immobilized on silica particles with diameters between 0.5 and 10 μm using a covalent binding method. Immobilization procedures were adjusted to optimize enzyme activity. The effects of product inhibition, thermal stability and operational stability have been determined. The feasibility of using the immobilized enzyme to hydrolyze wheat starch particles at temperatures below the gelatinization temperature (<55 °C) was proven. The optimal conditions for the hydrolysis were found to be: pH 4.5, 40 °C, calcium ion concentration 0.002 M and immobilized enzyme loading of 30 mg/ml. At these conditions, the immobilized enzyme was able to hydrolyze wheat starch particles at concentrations as high as 100 mg/ml with a final conversion of 90% after 24 h of operation. Maltose and glucose were found to inhibit the immobilized enzyme in a similar manner as reported previously using soluble enzyme. Although the thermostability of the immobilized enzyme was superior to the soluble enzyme, the immobilized enzyme degraded at the same rate as the soluble enzyme during cold wheat starch hydrolysis (operational stability unchanged). Model equations are presented for product inhibition, hydrolysis kinetics and enzyme degradation. Using best-fit parameters, the equations are shown to fit the experimental data well.     

Screening and optimization of protease production from a halotolerant Bacillus licheniformis isolated from saltern sediments

Protease producing halotolerant bacterium was isolated from saltern pond sediment (Tuticorin) and identified as Bacillus licheniformis (TD4) by 16S rRNA gene sequencing. Protease production was enhanced by optimizing the culture conditions. The nutritional factors such as carbon and nitrogen sources, NaCl and also physical parameters like incubation time, pH, agitation, inoculum size were optimized for the maximum yield of protease. Studies on the effect of different carbon and nitrogen sources revealed that xylose and urea enhances the enzyme production. Thus, with selected C–N sources along with 1 M NaCl the maximum protease production (141.46 U/mg) was obtained in the period of 24 h incubation at pH 8 under 250 rpm compared to the initial enzyme production (89.87 U/mg).     

Fed-batch culture of recombinant Saccharomyces cerevisiae for glucose 6-phosphate dehydrogenase production

We examined glucose 6-phosphate dehydrogenase (G6PD) production by fed-batch cultivation, using a recombinant strain of Saccharomyces cerevisiae W303-181 overexpressing this enzyme. The cultivations were carried out in a 3 L fermenter at pH 5.7, 30 °C, 2.0 vvm aeration, 200 rpm agitation and an inoculum concentration of 1.0 g/L. The volume of the culture medium in the fed-batch process varied from 1.333 to 2.0 L, due to the addition of 15.0 g/L glucose solution during 5 h. Different feeding rates were studied (exponentially increasing and decreasing feeding rates), and the feeding profile was determined by values of the parameter K (time constant), namely: 0.2, 0.5 and 0.8 h⁻¹. The best enzyme production (847 U/L) was obtained with an exponentially increasing feeding rate and K = 0.2 h⁻¹. The results attained also showed that this process is promising for G6PD production.     

Statistical optimization of enzymatic degradation process for oil palm empty fruit bunch (OPEFB) in rotary drum bioreactor using crude cellulase produced from Aspergillus niger EFB1

Oil palm empty fruit bunch (OPEFB) was pretreated with 2% (v/v) HNO₃ and degraded by Aspergillus niger EFB1 crude cellulase. Through 2 Level Factorial Design (2LFD), it was found that OPEFB concentration, temperature, incubation time, concentration of Tween 80 and agitation speed have significant effect in reducing sugar production. A standard Response Surface Methodology (RSM) design known as Central Composite Design (CCD) was used to optimize the enzymatic degradation condition of OPEFB in rotary drum bioreactor. Reducing sugar level of 1.183 g/L was obtained with the following optimized degradation conditions: 1.95% (w/v) OPEFB, 0.5% (v/v) Tween 80, 55 °C, 87.5 rpm in the incubation period of 3 days and 16 h. The optimal degradation condition improved reducing sugar production by 1.07 fold compared to that before optimization in shake flasks culture. The optimization strategy of enzymatic degradation of OPEFB inside rotary drum bioreactor led to increase in glucose, xylose, arabinose, galactose and mannose production by 3, 2.5, 1.64, 19.37 and 22.52 fold, respectively. The improvement in reducing sugar and polyoses production were comparable with the reduction in OPEFB cellulose and hemicellulose content by 89.32% and 48.17% respectively after enzymatic degradation in optimized condition.