Structural organization of the Corynebacterium glutamicum plasmid pCG100.

pCG100, a 3 kb cryptic plasmid of Corynebacterium glutamicum ATCC 13058, probably identical with pSR1 from C. glutamicum ATCC 19223, was characterized. The minimum region for autonomous replication was shown to be contained on a 1.9 kb BglII-NcoI fragment; a 380 bp HindIII-SphI fragment can replicate in the presence of the parental plasmid, which presumably provides a trans-acting replication factor. Derivatives of pCG100 are able to replicate in several Corynebacterium, Brevibacterium and Arthrobacter strains. pCG100 is compatible with pBL1, a cryptic plasmid of Brevibacterium lactofermentum. Shuttle plasmid vectors, containing the kanamycin-resistance gene from Tn903 or from Streptococcus faecalis as selectable markers and the AmpR, TetR or lacZ alpha genes for insertional inactivation, were constructed using the minimum replication fragment of pCG100.     

High-frequency transformation of Brevibacterium lactofermentum protoplasts by plasmid DNA.

An efficient polyethylene glycol-assisted method for transformation of Brevibacterium lactofermentum protoplasts that uses plasmid vectors has been developed. Two small plasmids, pUL330 (5.2 kilobases) and pUL340 (5.8 kilobases), both containing the kanamycin resistance gene from transposon Tn5 and the replication origin of the natural plasmid pBL1 of B. lactofermentum, were selected as vectors. Supercoiled forms of the plasmids yielded a 100-fold higher transformation frequency than did linear forms. The optimal transformation frequency was achieved with 10 ng of DNA in 1 ml of transformation buffer. Higher concentrations of plasmid DNA resulted in a decrease in transformation frequency per microgram of DNA. Optimal transformation was obtained with 25 to 35% polyethylene glycol 6000. Under optimal conditions, 10(6) transformants per microgram of DNA were obtained.     

Protoplast transformation of glutamate-producing bacteria with plasmid DNA

A method for polyethylene glycol-induced protoplast transformation of glutamate-producing bacteria with plasmid DNA was established. Protoplasts were prepared from cells grown in the presence of penicillin by treatment with lysozyme in a hypertonic medium. The concentration of penicillin during growth affected the efficiency of formation, regeneration, and polyethylene glycol-induced DNA uptake of protoplasts. Regeneration of protoplasts was accomplished on a hypertonic agar medium containing sodium succinate and yeast extract. The spectinomycin and streptomycin resistance plasmid pCG4, originally from Corynebacterium glutamicum T250, could transform various glutamate-producing bacteria such as C. glutamicum, Corynebacterium herculis, Brevibacterium flavum, and Microbacterium ammoniaphilum. The plasmid was structurally unchanged and stably maintained in new hosts. The transformation frequency of most competent protoplasts with pCG4 DNA isolated from primary transformants was high (ca. 10(6) transformants per microgram of covalently closed circular DNA) but was still two orders of magnitude below the frequency of transfection with modified DNA of the bacteriophage phi CGI. The difference was ascribed to the involvement of regeneration in transformation.     

Regions in Bacteroides plasmids pBFTM10 and pB8-51 that allow Escherichia coli-Bacteroides shuttle vectors to be mobilized by IncP plasmids and by a conjugative Bacteroides tetracycline resistance element.

Bacteroides-Escherichia coli shuttle vectors containing a nonmobilizable pBR322 derivative and either pBFTM10 (pDP1, pCG30) or pB8-51 (pEG920) were mobilized by IncP plasmid R751 or pRK231 (an ampicillin-sensitive derivative of RK2) between E. coli strains and from E. coli to Bacteroides recipients. IncI alpha R64 drd-ll transferred these vectors 1,000 times less efficiently than did the IncP plasmids. pDP1, pCG30, and pEG920 could be mobilized from B. uniformis donors to both E. coli and Bacteroides recipients by a conjugative Bacteroides Tcr (Tcr ERL) element which was originally found in a clinical Bacteroides fragilis strain (B. fragilis ERL). However, the shuttle vector pE5-2, which contains pB8-51 cloned in a restriction site that prevents its mobilization by IncP or IncI alpha plasmids, also was not mobilized at detectable frequencies from Bacteroides donors by the Tcr ERL element. The mobilization frequencies of pCG30, pDP1, and pEG920 by the Tcr ERL element in B. uniformis donors to E. coli recipients was about the same as those to isogenic B. uniformis recipients. Transfer of the shuttle vectors from B. uniformis donors to E. coli occurred at the same frequencies when the matings were done aerobically or anaerobically. Growth of the B. uniformis donors in tetracycline (1 microgram/ml) prior to conjugation increased the mobilization frequencies of the vectors to both E. coli and Bacteroides recipients 50 to 100 times.     

Transformation ofStreptomyces lincolnensis protoplasts with plasmid vectors

A method for the preparation and regeneration of protoplasts of Streptomyces lincolnensis is described. Mycelium in the early exponential phase appeared to be most suitable for this purpose and yielded up to 25% regenerated intact cells. Transformation of S. lincolnensis protoplasts was achieved using broad-host-range streptomycete plasmid vectors pIJ622, pMP66, pRS410 and pIJ943 constructed from replicons pIJ101, pSLG33 and SCP2. The efficiency of transformation was 3.10(3) transformants per micrograms plasmid DNA when (2-5).10(7) recipient protoplasts were used. Interspecific transformations showed that there is no efficient restriction system in S. lincolnensis that would limit the transfer of genetic information from S. lividans or E. coli.     

Characterization of a region of plasmid pBL1 of Brevibacterium lactofermentum involved in replication via the rolling circle model.

The minimal region for autonomous replication of pBL1, a 4.5-kb cryptic plasmid of Brevibacterium lactofermentum ATCC 13869 that has been used to construct a variety of corynebacterium vectors, was shown to be contained on a 1.8-kb HindII-SphI DNA fragment. This region contains two open reading frames (ORFs) (ORF1 and ORF5) which are essential for pBL1 replication in B. lactofermentum. Accumulation of single-strand intermediates in some of the constructions indicates that plasmid pBL1 replicates via the rolling circle replication model; its plus strand and minus strand were identified by hybridization with two synthetic oligonucleotide probes complementary to each pBL1 strand. ORF1 seems to encode the Rep protein and showed partial homology with sequences for Rep proteins from Streptomyces plasmids which replicate via rolling circle replication such as pIJ101, pSB24, and pJV1.     

Screening of plasmids in non-pathogenic corynebacteria

Abstract A screening of plasmids in 25 nonpathogenic coryneform bacteria was carried out. 11 Strains showed at least one plasmid, ranging in size from 4.2 to 55 kb. These plasmids did not encode bacteriocin production or resistance to a number of antibiotics or to ions such as arsenite, mercury(II) and cobalt(II). A detailed study of plasmid pBL100 from Brevibacterium linens is presented. pBL100 has a size of 7.75 kb, and contains single sites for the endonucleases: Hin dIII; Pst I, Bgl II, Eco RI and Bam HI. B. linens is easily and efficiently transformed with vectors derived from pBL1 isolated from Brevibacterium lactofermentum .     

Production of D-p-hydroxyphenylglycine by N-carbamoyl-D-amino acid amidohydrolase-overproducing Escherichia coli strains.

The N-carbamoyl-D-amino acid amidohydrolase (D-carbamoylase) gene from Agrobacterium radiobacter NRRL B11291 has been successfully cloned and expressed in Escherichia coli. Subcloning of the D-carbamoylase gene into different types of vectors and backgrounds of E. coli strains showed that the optimal expression level of D-carbamoylase was achieved in a ColE1-derived plasmid with a 150-fold increase in specific enzyme activity compared to that in a pSC101-derived plasmid. In addition, the recombinant plasmids were very stable in the E. coli strain ATCC11303 but not in JCL1258 tested here. Employing the recombinant E. coli strain DH5alpha/pAH61 for D-p-hydroxyphenylglycine production showed that the cell was capable of transforming N-carbamoyl-D-hydroxylphenylglycine to D-p-hydroxyphenylglycine with a molar conversion yield of 100% and a production rate of 1.9 g/(L h). In comparison with A. radiobacter NRRL B11291, this productivity approximates a 55-fold increase in D-hydroxyphenylglycine production. This result suggests the potential application of recombinant E. coli strains for the transformation reaction.     

Genetic transformation of Streptococcus pneumoniae by heterologous plasmid deoxyribonucleic acid.

A number of heterologous plasmid deoxyribonucleic acids (DNAs) coding for erythromycin, tylosin, lincomycin, tetracycline, or chloramphenicol resistance have been introduced into Streptococcus pneumoniae via genetic transformation with frequencies that varied between 10(-5) to as high as 5 x 10(-1) per colony-forming unit. Transformation with plasmid DNA required pneumococcal competence, was competed by chromosomal DNA, and showed a saturation at about 0.5 micrograms/ml (with a recipient population of 3 x 10(7) colony-forming units of competent cells per ml). Plasmid transformation did not occur with a recipient strain, 410, defective in endonuclease I activity and in chromosomal genetic transformation. All erythromycin-resistant transformants examined contained covalently closed circular DNA with the same electrophoretic mobility on agarose gels as the donor DNAs, and when examined in detail the plasmid reisolated from the transformants had the same restriction patterns and the same specific transforming activity as the donor DNA. In the cases of two plasmids examined in detail--pAM77 and pSA5700 Lc9--most of the transforming activity was associated with DNA monomers; DNA multimers present in pSA5700 Lc9 also had biological activity. An unexpected finding was the demonstration of transformation (2 x 10(-5) per colony-forming unit) with plasmid DNAs linearized by treatment with S1 nuclease or with restriction endonucleases.     

Plasmid transformation of Streptococcus lactis protoplasts: optimization and use in molecular cloning

The parameters affecting polyethylene glycol-induced plasmid transformation of Streptococcus lactis LM0230 protoplasts were examined to increase the transformation frequency. In contrast to spreading protoplasts over the surface of an agar medium, their incorporation into soft agar overlays enhanced regeneration of protoplasts and eliminated variability in transformation frequencies. Polyethylene glycol with a molecular weight of 3,350 at a final concentration of 22.5% yielded optimal transformation. A 20-min polyethylene glycol treatment of protoplasts in the presence of DNA was necessary for maximal transformation. The number of transformants recovered increased as the protoplast and DNA concentration increased over a range of 3.0 X 10(6) to 3.0 X 10(8) protoplasts and 0.25 to 4.0 micrograms of DNA per assay, respectively. With these parameters, transformation was increased to 5 X 10(3) to 4 X 10(4) transformants per microgram of DNA. Linear and recombinant plasmid DNA transformed, but at frequencies 10- to 100-fold lower than that of covalently closed circular DNA. Transformation of recombinant DNA molecules enabled the cloning of restriction endonuclease fragments coding for lactose metabolism into S. lactis LM0230 with the Streptococcus sanguis cloning vector, pGB301. These results demonstrated that the transformation frequency is sufficient to clone plasmid-coded genes which should prove useful for strain improvement of dairy starter cultures.     

Plasmid transformation of Streptococcus lactis protoplasts: optimization and use in molecular cloning.

The parameters affecting polyethylene glycol-induced plasmid transformation of Streptococcus lactis LM0230 protoplasts were examined to increase the transformation frequency. In contrast to spreading protoplasts over the surface of an agar medium, their incorporation into soft agar overlays enhanced regeneration of protoplasts and eliminated variability in transformation frequencies. Polyethylene glycol with a molecular weight of 3,350 at a final concentration of 22.5% yielded optimal transformation. A 20-min polyethylene glycol treatment of protoplasts in the presence of DNA was necessary for maximal transformation. The number of transformants recovered increased as the protoplast and DNA concentration increased over a range of 3.0 X 10(6) to 3.0 X 10(8) protoplasts and 0.25 to 4.0 micrograms of DNA per assay, respectively. With these parameters, transformation was increased to 5 X 10(3) to 4 X 10(4) transformants per microgram of DNA. Linear and recombinant plasmid DNA transformed, but at frequencies 10- to 100-fold lower than that of covalently closed circular DNA. Transformation of recombinant DNA molecules enabled the cloning of restriction endonuclease fragments coding for lactose metabolism into S. lactis LM0230 with the Streptococcus sanguis cloning vector, pGB301. These results demonstrated that the transformation frequency is sufficient to clone plasmid-coded genes which should prove useful for strain improvement of dairy starter cultures.     

Transformation of Clostridium perfringens L forms with shuttle plasmid DNA.

L-form (L-phase) cultures of Clostridium perfringens were tested for their transformability with plasmid DNA. Three L-form strains were transformable, but one, strain L-13, was superior to the others. This strain was easily and reproducibly transformed with previously described shuttle vectors which were derived from either C. perfringens or Escherichia coli. Strain L-13 was transformable by a variety of methods, and a new micromethod worked well under both aerobic and anaerobic conditions. The maximal number of transformants was attained after strain L-13 was exposed for 4 h to the transforming DNA and polyethylene glycol. Viable counts determined in tubes of semisolid brain heart infusion medium containing 10% sucrose, with or without 2 micrograms of tetracycline per ml, showed a transformation rate of 3.9 X 10(-5) (transformants per viable cells).     

Transformation of Clostridium perfringens L forms with shuttle plasmid DNA

L-form (L-phase) cultures of Clostridium perfringens were tested for their transformability with plasmid DNA. Three L-form strains were transformable, but one, strain L-13, was superior to the others. This strain was easily and reproducibly transformed with previously described shuttle vectors which were derived from either C. perfringens or Escherichia coli. Strain L-13 was transformable by a variety of methods, and a new micromethod worked well under both aerobic and anaerobic conditions. The maximal number of transformants was attained after strain L-13 was exposed for 4 h to the transforming DNA and polyethylene glycol. Viable counts determined in tubes of semisolid brain heart infusion medium containing 10% sucrose, with or without 2 micrograms of tetracycline per ml, showed a transformation rate of 3.9 X 10(-5) (transformants per viable cells).     

Sexual Interaction in Heterothallic Strains of Closterium peracerosum-strigosum-littorale: Partial Characterization of a Male-Specific Sexual Pheromone, Protoplast-Releasing Substance

A sexual pheromone, named the protoplast releasing substance (PRS), was formed by mating type minus cells. PRS activates mating type plus cells and results in the release and fusion of protoplasts within distended conjugation-papilla in paired cells and in the release and disruption of protoplasts in unpaired mating type plus cells. In an agar barrier system, the activation of mating type plus cells was markedly inhibited by treatment with pronase (5-10 micrograms per milliliter), proteinase (100 micrograms per milliliter), and α-mannosidase (10 micrograms per milliliter). Trypsin (10-100 micrograms per milliliter) had no effect on the activation in the agar barrier system. The results suggest that PRS is a glycoprotein with pronase-sensitive and trypsin-insensitive structure.     

Properties and construction of plasmid pFW213, a shuttle vector with the oral Streptococcus origin of replication

Streptococcus parasanguinis is among the most successful colonizers of the human body. Strain FW213 harbors a 7.0-kb cryptic plasmid, pFW213, with a copy number at 5 to 10 per chromosome. Sequence and functional analyses of pFW213 revealed that the open reading frame (ORF) encoding the replication protein (Rep) is essential for the replication of pFW213, and the putative plasmid addiction system (RelB and RelE) and an ORF (ORF6) with no known function are required for its stability. The minimal replicon of pFW213 contains the rep gene and its 5'-flanking 390-bp region. Within the minimal replicon, an A/T-rich region followed by 5 contiguous 22-bp repeats was located 5' of the ATG of rep. No single-stranded replication intermediates were detected in the derivatives of pFW213, suggesting that pFW213 replicates via the theta replication mechanism. The minimal replicon was unstable in streptococcal hosts without selection, but the stability was greatly enhanced in derivatives containing the intact relBE genes. A Streptococcus-Escherichia coli shuttle vector, pCG1, was constructed with the pFW213 replicon. Plasmid pCG1 features a multiple cloning region and a spectinomycin resistance determinant that is expressed in both Streptococcus spp. and E. coli. Various streptococcal DNA fragments were cloned in pCG1, and the recombinant constructs were stably maintained in the streptococcal hosts. Since pCG1 is compatible with the most widely used streptococcal replicon, pVA380-1, pCG1 will provide a much needed tool allowing the cloning of two genes that work in concert in the same host.     

Efficient transformation of Amycolatopsis orientalis (Nocardia orientalis) protoplasts by Streptomyces plasmids.

Conditions for efficient transformation of Amycolatopsis orientalis (Nocardia orientalis) protoplasts by Streptomyces plasmid cloning vectors were identified. Three streptomycete plasmid origins of replication function in A. orientalis, as do the apramycin resistance gene from Escherichia coli, the thiostrepton resistance gene from Streptomyces azureus, and the tyrosinase gene from Streptomyces antibioticus. A. orientalis appears to express some restriction and modification, because highest transformation frequencies (10(6)/micrograms of DNA) were obtained when plasmid pIJ702 was modified by passage in A. orientalis.     

The association between a large molecular mass plasmid and virulence in a strain of Salmonella pullorum

Eight strains of Salmonella pullorum isolated from epidemiologically independent cases of pullorum disease (bacillary white diarrhoea) in young chickens possessed at least one large molecular mass plasmid in addition to smaller molecular mass plasmids. The 85 kb large plasmid, designated pBL001, of one of these strains was 'tagged' with an ampicillin resistance marker by the insertion of transposon Tn3. The plasmid was eliminated by passage in nutrient broth containing acridine orange. It was reintroduced into the strain from which it had been eliminated by mobilization using the F plasmid. Following oral inoculation of newly hatched Rhode Island Red chickens, the parent strain produced a high level of mortality (71%) with characteristic signs of pullorum disease. Following intramuscular inoculation of chickens of the same age, the bacterial LD50 was (log10 c.f.u.) 3.38 +/- 0.43 (mean +/- SEM). The derivative lacking pBL001 produced no mortality or morbidity when inoculated orally and the bacterial LD50 value increased to (log10 c.f.u.) 5.54 +/- 0.28. This increase was statistically significant (chi 2 = 13.6, P less than 0.01). Reintroduction of pBL001 restored virulence as gauged by oral inoculation of chickens (62% mortality) and by the intramuscular bacterial LD50 value (log10 c.f.u. = 3.78 +/- 0.25). These values were not significantly different to those produced by the parent strain (chi 2 = 0.59, P = 0.4 and chi 2 = 0.66, P = 0.5, respectively). Following oral inoculation, the pBL001-cured derivative was less invasive than the parent strain and following intramuscular inoculation it persisted for a shorter period than the parent strain in the liver, spleen and the leg muscle into which it had been inoculated. In addition, the parent strain, but not the pBL001-cured derivative, localized in large numbers in the myocardium where it produced lesions typical of pullorum disease. Both the parent strain and the pBL001-cured derivative were serum resistant in the presence of rabbit serum and grew equally well in chick serum and broth.     

Protoplast transformation of Bacillus stearothermophilus NUB36 by plasmid DNA

An efficient protoplast transformation system was established for Bacillus stearothermophilus NUB3621 using thermophilic plasmid pTHT15 Tcr (4.5 kb) and mesophilic plasmid pLW05 Cmr (3 kb), a spontaneous deletion derivative of pPL401 Cmr Kmr. The efficiency of transformation of NUB3621 with pLW05 and pTHT15 was 2 x 10(7) to 4 x 10(8) transformants per micrograms DNA. The transformation frequency (transformants per regenerant) was 0.5 to 1.0. Chloramphenicol-resistant and tetracycline-resistant transformants were obtained when competent cells of Bacillus subtilis were transformed with pLW05 [2.5 x 10(5) transformants (microgram DNA)-1] and pTHT15 [1.8 x 10(5) transformants (micrograms DNA)-1], respectively. Thus, these plasmids are shuttle vectors for mesophilic and thermophilic bacilli. Plasmid pLW05 Cmr was not stably maintained in cultures growing at temperatures between 50 and 65 degrees C but the thermostable chloramphenicol acetyltransferase was active in vivo at temperatures up to 70 degrees C. In contrast, thermophilic plasmid pTHT15 Tcr was stable in cultures growing at temperatures up to 60 degrees C but the tetracycline resistance protein was relatively thermolabile at higher temperatures. The estimated copy number of pLW05 in cells of NUB3621 growing at 50, 60, and 65 degrees C was 69, 18, and 1 per chromosome equivalent, respectively. The estimated copy number of pTHT15 in cells of NUB3621 growing at 50 or 60 degrees C was about 41 to 45 per chromosome equivalent and 12 in cells growing at 65 degrees C.     

Effect of DNA concentration on recombinant plasmid recovery after blunt-end ligation.

We describe conditions for optimal recovery of recombinant plasmids after blunt-end ligation. It was found that one of the most critical parameters of the blunt-end ligation reaction is total DNA concentration (vector plus incoming DNA). This concentration was optimal in the range of 1-5 micrograms/ml of reaction mixture. Concentrations larger than 10 micrograms/ml result in strong inhibition. The optimal molar relationship between incoming DNA and vector was found to be 1 or less. Under these conditions, using dephosphorylated vector, recombinants are generated at a frequency of 10(6) colonies per microgram of insert, provided that transforming efficiency is about 5 x 10(7) colonies per microgram of plasmid DNA.