Molecular docking of novel donor–π–acceptor dicyanomethylenedihydrofuran-based fluorescent chromophores

A series of donor–π–acceptor dicyanomethylenedihydrofuran (DCDHF)-based chromophores comprising different π-aryl bridges and different terminal groups was synthesized and characterized. The chromophores were synthesized via Knoevenagel condensation of the active methyl-bearing DCDHF (electron acceptor) with a tertiary amine-containing arylaldehyde (electron donor) in dry pyridine at room temperature in the presence of a few drops of acetic acid. The synthesis approach involved the development of phenyl(thienyl)vinyl-bridged dicyanomethylenedihydrofuran dyes with a tertiary amine terminal group. Both absorption and emission spectra were explored. The strong emission properties detected using the synthesized chromophores could be attributed to intramolecular charge transfer. The chemical structures of the synthesized chromophores were verified using ¹H/¹³C nuclear magnetic resonance and Fourier transform infrared spectroscopy. Both tertiary amine-containing and arylaldehyde groups were found to influence the biological properties of the synthesized chromophores. The synthesized (DCDHF)-based hybrids were tested to examine antibacterial effectiveness. Derivatives 1 and 2 demonstrated activity towards Gram-positive bacteria rather than Gram-negative bacteria when compared with an amoxicillin antibiotic reference. Finally, molecular docking inspiration was undertaken to determine their binding relationships (PDB code: 1LNZ).     

Purification, Characterization of GH11 Endo-β-1,4-xylanase from Thermotolerant Streptomyces sp. SWU10 and Overexpression in Pichia pastoris KM71H

We have previously described two forms of an endo-β-1,4-xylanase (XynSW2A and XynSW2B) synthesized by thermotolerant Streptomyces sp. SWU10. Here, we describe another xylanolytic enzyme, designated XynSW1. The enzyme was purified to homogeneity from 2 L of culture filtrate. Its apparent molecular mass was 24 kDa. The optimal pH and temperature were pH 5.0 and 40 °C, respectively. The enzyme was stable in a wide pH ranges (pH 1–11), more than 80 % of initial activity remained at pH 2–11 after 16 h of incubation at 4 °C and stable up to 50 °C for 1 h. Xylobiose and xylotriose were the major xylooligosaccharides released from oat spelt xylan by the action of XynSW1, indicating of endo-type xylanase. The complete xynSW1 gene contains 1,011 bp in length and encode a polypeptide of 336 with 41 amino acids of signal peptide. The amino acid sequence analysis revealed that it belongs to glycoside hydrolase family 11 (GH11). The mature xynSW1 gene without signal peptide sequence was overexpressed in Pichia pastoris KM71H. The recombinant XynSW1 protein showed higher molecular mass due to the differences in glycosylation levels at the six N-glycosylation sites in the amino acid sequence and exhibited better physicochemical properties than those of the native enzyme including higher optimal temperature (60 °C), and specific activity, but lower optimal pH (4.0). Because of their stability in a wide pH ranges, both of native and recombinant enzymes of XynSW1, may have potential application in several industries including food, textile, biofuel, and also waste treatment.     

Functional assignment of chromophores and energy transfer in C phycocyanin isolated from the thermophilic cyanobacterium Mastigocladus laminosus

The optical characteristics and pathway of energy transfer in the C phycocyanin trimer isolated from the thermophilic cyanobacterium Mastigocladus laminosus were investigated at steady state by absorption, circular dichroism, fluorescence and fluorescence polarization spectroscopy. Based on the comparison of optical data with the 3-dimensional structure of the C-phycocyanin trimer determined by X-ray analysis (Schirmer, T., Bode, W., Huber, R., Sidler, W. and Zuber, H. (1984) in Proceedings of the Symposium on Optical Properties and Structure of Tetrapyrroles, (Blauer, G. and Sund, M., eds.), pp. 445–449, Walter de Gruyter, Berlin, and (1985) J. Mol. Biol. 184, 257–277), the functional assignment of three types of chromophore was established. An α subunit has an s chromophore and the chromophores at the positions 84 and 155 in the amino acid sequence of the β subunit are assigned as f and s chromophores, respectively. In the C phycocyanin trimer energy transfer occurs from the α chromophore in one monomer to the β_f chromophore in an adjacent monomer, and from the β_s chromophore to the β_f chromophore in the same monomer. The direction of energy flow is from the outside to the inside of the trimer, where the locus for the binding of a colourless polypeptide is postulated. In the phycobilisomes the energy concentrated at the β_f chromophores might be transferred toward the allophycocyanin core mainly by the β_f chromophores in the phycocyanin rods.     

Circular dichroism and the conformational properties of soybean beta-amylase

The conformational properties of soybean β-amylase were investigated by the circular dichroism probe and measurement of enzyme activity. The enzyme exhibited a positive circular dichroism band at 192 nm, a negative band at 222 nm, and a shoulder near 210 nm. Analysis of the spectrum in the far ultraviolet zone indicated the presence of approximately 30% of α helix and 5–10% of β-pleated sheet, the rest of the polypeptide main chain possessing aperiodic structure. In the near ultraviolet reagion, the enzyme protein showed at least six positive peaks at 259, 265, 273, 281, 292, and 297 nm. The positive bands at 292 and 297 nm remained unaltered on acetylation of the enzyme by N-acetylimidazole and were assigned to tryptophanyl chromophores. These bands were affected in intensity in the presence of maltose or cycloheptaamylose, which indicates that some tryptophan residues are situated at the binding sites. The native conformation of soybean β-amylase was found to be sensitive to pH variation (below pH 5 and above pH 10), sodium dodecyl sulfate, guanidine hydrochloride, and heating to 50–55 °C. Complete disorganization of the secondary structure was attained by 6 m guanidine hydrochloride. Sodium dodecyl sulfate was effective in disturbing the tertiary structure of the enzyme but did not affect significantly the secondary structure. Enzymatic inactivation was paralleled by the decrease of circular dichroism bands in the near ultraviolet region as produced by the denaturants. It is concluded that the uniquely folded structure of the enzyme contains some less rigid domains and a rigid core stabilized by hydrophobic interactions, electrostatic interactions, and hydrogen bonds.     

Plasmonic Properties of β-Sn Nanoparticles in Ordered and Disordered Arrangements

This work investigates the localized surface plasmon resonance (LSPR) of β-Sn also known as white tin. Recently, studies on arrays of β-Sn nanoparticles have shown that these arrays possess strong optical features caused by diffractive effects in the particle grating (Johansen et al., Phys Rev B 84:113405–113408, 2011). In the presence of the grating, the LSPR could not clearly be distinguished in the spectra. To get a better understanding of the plasmonic properties of the particles, we have now eliminated the diffractive effects by placing the particles in a random distribution. The particles were fabricated by electron beam lithography on a fused silica substrate and investigated by optical transmission measurements. In the random configuration, a clear LSPR is observed at 530 nm for particles with a diameter of 155 nm and a height of 50 nm.     

Atom transfer radical polymerization of N-(ω-alkylcarbazolyl)methacrylates via the use of novel heteroleptic Ru(II) polypyridyl initiator

cis-Dichloro-bis(2-(2-pyridyl)-4-carbonylmethylquinoline)ruthenium (II) complex was synthesized and its structure, electrochemical, electronic absorption and emission properties were determined. A derivative Ru(II) complex with radical initiating sites was employed in the atom transfer radical polymerization (ATRP) of functional N-(ω^′-alkylcarbazoly)methacrylates to provide linear metallopolymers with the metal chromophores at one termini of the polymer chain. These polymers were characterized by gel permeation chromatography in combination with low-angle laser light-scattering, UV-Vis and emission spectroscopy to verify the covalent attachment of the metal chromophores to the polymer chain. The polymers thermal transitions and thermal stabilities were also investigated by differential scanning calorimetry and thermogravimetric analysis.     

Effects of pH on structural and functional properties of porin from the outer membrane of <Emphasis Type="Italic">Yersinia pseudotuberculosis</Emphasis>. I. Functionally important conformational transitions of yersinin

The changes in the structural and functional properties of yersinin, a porin from the outer membrane of Yersinia pseudotuberculosis, were studied in the pH range 8.0–2.0 using SDs-PAGE, scanning microcalorimetry, optical spectroscopy and bilayer lipid membrane technique. It was found that in the pH range under study the changes in the spatial structure of yersinin were biphasic. In the first steps of pH titration (pH 8.0–4.5), porin underwent a series of conformational transitions, which did not affect the trimeric structure of its molecule. In the second step (pH 4.0–2.0), structural rearrangements led to dissociation of the protein trimers into monomers. It is noteworthy that complete unfolding of the polypeptide chain of the protein was not observed even at low values of pH. Thus, at pH 2.0 the conformational intermediate of the protein retained up to 50% of its regular secondary structure. Studies of current fluctuations in the bilayer lipid membrane revealed that in weakly acidic media the conductivity of yersinin pores was decreased by one order of magnitude. The most drastic changes in the conductivity of the model membrane were observed at pH 5.8, whereas a further decrease of pH to 5.0 resulted in the closure of porin channels. It was concluded that the observed changes in the pore-forming properties of yersinin in a narrow range of pH represent an early step in the adaptation of bacteria to the changing conditions of the environment and entail control over the biosynthesis of nonspecific porins. The pH-dependent changes in the structure and pore-forming properties of yersinin provide additional evidence in favor of conformational and functional plasticity of porins.     

The two faces of the purple membrane. II. Differences in surface charge properties revealed by ferritin binding.

The two faces of the purple membrane of Halobacterium halobium possess different surface charge densities. The binding of ferritin to the two faces as a function of pH and ionic strength was investigated by electron microscopy. The combination of these experiments with metal decoration reveals that one the extracellular face is relatively homogeneous with respect to the pK values of its titrable groups pK values approx. 3 to 3.6) whereas the opposite face shows two distinct ranges of pK values, centred at about pK 2 and 4.2. Below pH 3 and between pH 4 and 5 this face carries the higher surface charge density.     

The effects of salinity,pH, and temperature on Rhombognathus notops (Gosse) (Rhombognathinae: Halacaridae: Prostigmata)

The effects of three environmental conditions were investigated on Rhombognathus notops (Gosse) (Halacaridae) under laboratory conditions. Considered in isolation, R. notops can tolerate a broad range of temperature (<4–30 °C), salinity (10–60%.), and pH (3–10) ranges which are typical of rock-pools. When exposed to different salinity and pH combinations, the range of tolerance to both these factors is affected. This suggests that previous studies which imply that salinity alone is the major factor affecting the distribution of Halacaridae, may not be wholly accurate.     

pH‐responsive fluorescence chemical sensor constituted by conjugated polymers containing pyridine rings

Poly(p‐pyridinium phenylene ethynylene)s (PPyPE) functionalized with alternating donor–acceptor repeat units were synthesized by a Pd‐catalyzed Sonogashira coupling reaction between diethynyl monomer and di‐iodopyridine for use as a pH‐responsive fluorescence chemical sensor. The synthesized PPyPE, containing pyridine units, was characterized by FT‐IR, ¹H and ¹³C NMR, UV–visible and fluorescence spectroscopies. We investigated the relationship between changes of optical properties and protonation/deprotonation of PPyPE containing pyridine units in solution. Addition of HCl decreased and red‐shifted the fluorescence intensity of the conjugated polymers that contained pyridine rings; fluorescence intensity of the polymers increased upon addition of NaOH solution. The synthesized PPyPE was found to be an effective and reusable chemical sensor for pH sensing. Copyright © 2015 John Wiley & Sons, Ltd.     

The optical properties of alanine and proline diketopiperazines

The optical properties of the diketopiperazine chromophore of the cyclic dipeptides have been investigated as a function of molecular conformation. The rotatory strengths of L -alanyl–L -alanine diketopiperazine and L -prolyl–L -proline diketopiperazine have been calculated as a function of the angle of fold of the diketopiperazine ring. The results of these theoretical calculations have been compared with experimental circular dichroism and optical rotatory dispersion data. It is shown that the observed optical properties of these molecules can be explained only if their diketopiperazine rings are folded in opposite directions. The direction of fold is established for each molecule. In solution, the diketopiperazine ring of L -alanyl-L -alanine diketopiperazine is folded in the direction opposite to that found by X-ray diffraction analysis of crystals. It has been observed that the degree of conservatism of the π → π* couplet of L -propyl–L -proline diketopiperazine depends markedly upon the nature of the solvent that is used. In addition, a shoulder has been discovered in the CD spectrum of L -alanyl–L -alanine diketopiperazine, which may not be directly attributable to the n → π* and π → π* transitions of the peptide chromophores.     

Production and characterization of a thermostable endo-type β-xylanase produced by a newly-isolated Streptomyces thermocarboxydus subspecies MW8 strain from Jeju Island

A xylanase-producing, Gram-positive, aerobic, and spore-forming bacterium was isolated from a soil sample collected from Jeju Island and was classified as a novel subspecies of Streptomyces thermocarboxydus on the basis of 16S rRNA gene sequence similarity, the results of DNA–DNA hybridization analysis, and phenotypic characteristics. The novel strain was named as S. thermocarboxydus subsp. MW8 (=KCTC29013 = DSM52054). This strain produced extracellular xylanase. Xylanase from the strain was purified to homogeneity and had an apparent molecular weight of 52 kDa. The NH₂-terminal sequence (Ala-Glu-Ile-Arg-Leu) was distinct from those of previously reported xylanases. The purified xylanase produced xylobiose as the end-product of birchwood xylan hydrolysis. The K_m and V_max values of the purified xylanase on birchwood xylan were 1.71 mg/ml and 357.14 U/mg, respectively. The optimum pH and temperature for the enzyme were found to be 7.0 and 50 °C, respectively, and the enzyme exhibited significant heat stability. In addition, the enzyme was active over broad pH ranges: 84% of the maximum activity at pH 5.0, 84–88% at pH 6.0, 88% at pH 8.0, and 75–81% (pH 9.0). These enzymatic properties may be very useful for use in bio-industrial applications.     

Fluorescence from sensitizing phycobilin chromophores in the blue-green alga Anacystis nidulans

Regeneration of the pigment system of Anacystis nidulans was studied following nitrate starvation. Three new, distinct fluorescence bands, at 596, 615 and 636 nm attributed to sensitizing phycobilin chromophores were detected. They each possess a separate excitation band at 425, 395 and 410 nm, respectively.     

Characterization of a series of far-red-absorbing thiobarbituric acid oxonol derivatives as fluorescent probes for biological applications

Chromophores that absorb in the far-red region of the spectrum are increasingly being utilized for applications in the biosciences. We have synthesized and evaluated a novel series of fluorescent oxonols based on thiobarbituric acids containing aryl and heteroaryl substituents. The novel chromophores possess narrow absorption spectra ( approximately 40-nm bandwidths), reasonable Stokes shifts ( approximately 25 nm), and quantum yields of up to 0.67 in organic solvents and 0.3 in aqueous solvents, with absorption wavelength maxima at 620-640 nm. The spectral properties of the compounds are sensitive to base and exhibit a loss of far-red absorbance that is concentration and time dependent. Derivatives have been synthesized that can be used for the labeling of macromolecules such as proteins and DNA. The probes show environment sensitivity and the oligonucleotide conjugates sense the formation of duplex DNA. These novel far-red fluorophores have potential applications in diagnostic and research applications.     

Second‐harmonic generation from Langmuir–Blodgett film of cyclic peptide carrying two disperse red 1 on fused quartz surface

Cyclic octapeptide carrying one or two nonlinear optical chromophores, disperse red 1 (DR‐1), was synthesized and immobilized on a substrate to attain an active surface for second‐harmonic generation (SHG). Each cyclic octapeptide was transferred on a fused quartz substrate by the Langmuir–Blodgett (LB) method to afford a uniform monolayer. Infrared reflection–absorption spectroscopy of the LB monolayer revealed that the cyclic skeleton lay roughly flat on the surface. The SHG intensity from the monolayer of the cyclic peptide with two DR‐1 units was stronger than that from that with one DR‐1 unit. The difference is discussed in terms of molecular orientation and surface density of the active chromophores. The cyclic peptide is shown here to be an effective scaffold to modify a substrate surface with functional groups of a monolayer with taking stability of the monolayer and orientation of the functional group into consideration. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

Enzymatic Saccharification of Lignocelluloses Should be Conducted at Elevated pH 5.2–6.2

This study revealed that cellulose enzymatic saccharification response curves of lignocellulosic substrates were very different from those of pure cellulosic substrates in terms of optimal pH and pH operating window. The maximal enzymatic cellulose saccharification of lignocellulosic substrates occurs at substrate suspension pH 5.2–6.2, not between pH 4.8 and 5.0 as exclusively used in literature using T. reesi cellulase. Two commercial cellulase enzyme cocktails, Celluclast 1.5L and CTec2 both from Novozymes, were evaluated over a wide range of pH. The optimal ranges of measured suspension pH of 5.2–5.7 for Celluclast 1.5L and 5.5–6.2 for CTec2 were obtained using six lignocellulosic substrates produced by dilute acid, alkaline, and two sulfite pretreatments to overcome recalcitrance of lignocelluloses (SPORL) pretreatments using both a softwood and a hardwood. Furthermore, cellulose saccharification efficiency of a SPORL-pretreated lodgepole pine substrate showed a very steep increase between pH 4.7 and 5.2. Saccharification efficiency can be increased by 80 % at cellulase loading of 11.3 FPU/g glucan, i.e., from approximately 43 to 78 % simply by increasing the substrate suspension pH from 4.7 to 5.2 (buffer solution pH from 4.8 to 5.5) using Celluclast 1.5L, or by 70 % from approximately 51 to 87 % when substrate suspension pH is increased from 4.9 to 6.2 (buffer solution pH from 5.0 to 6.5) using CTec2. The enzymatic cellulose saccharification response to pH is correlated to the degree of substrate lignin sulfonation. The difference in pH-induced lignin surface charge, and therefore surface hydrophilicity and lignin–cellulase electrostatic interactions, among different substrates with different lignin content and structure is responsible for the reported different enhancements in lignocellulose saccharification at elevated pH.     

Complex formation between polyadenylic acid and formycin B

Polyadenylic acid forms a 2:1 complex with the C-nucleoside formyein B at both pH 7.0, 0.15 m-Na⁺ and pH 6.0, 0.15 M-Na⁺. The formation of this complex has been followed by equilibrium dialysis, and by optical rotatory dispersion measurements in the range 333 to 450 nm. At pH 7, melting curves for thermal dissociation of the complex (followed by the optical rotation at 345 nm) show a strongly co-operative helix-coil transition. From the variation of T_m with the free formyein B concentration at this temperature, the partial molar enthalpy of formation of the complex, at the mid-point of the transition, has been calculated as -12.8 kcal./mol of formyein B. Viscometry and optical rotatory dispersion measurements indicate that the structure of the complex at pH 6 is the same as at pH 7, and that it may be formed in preference to the double-helical acid form of poly (A). The structure and properties of the complex are discussed.     

An electrogenic proton pump in plasma membranes from the cellular slime mould Dictyostelium discoideum

Plants and fungi possess an outwardly directed plasma membrane proton pump that may regulate intracellular pH. We provide the first demonstration that amoebae of the slime mould Dictyostelium discoideum also possess a similar proton pump. It can be assayed either as an ATPase activity in highly purified plasma membranes or as a proton pump, after solubilization and reconstruction into liposomes. The pump is inhibited by vanadate, diethylstilbestrol (DES) and miconazole but not by azide or ouabain. The proton pump described here may represent the target for the action of DES and miconazole, both of which have previously been shown to induce stalk cell formation during the in vitro development of Dictyostelium.     

CpeY is a phycoerythrobilin lyase for cysteine 82 of the phycoerythrin I α-subunit in marine Synechococcus

Marine Synechococcus are widespread in part because they are efficient at harvesting available light using their complex antenna, or phycobilisome, composed of multiple phycobiliproteins and bilin chromophores. Over 40% of Synechococcus strains are predicted to perform a type of chromatic acclimation that alters the ratio of two chromophores, green-light–absorbing phycoerythrobilin and blue-light–absorbing phycourobilin, to optimize light capture by phycoerythrin in the phycobilisome. Lyases are enzymes which catalyze the addition of bilin chromophores to specific cysteine residues on phycobiliproteins and are involved in chromatic acclimation. CpeY, a candidate lyase in the model strain Synechococcus sp. RS9916, added phycoerythrobilin to cysteine 82 of only the α subunit of phycoerythrin I (CpeA) in the presence or absence of the chaperone-like protein CpeZ in a recombinant protein expression system. These studies demonstrated that recombinant CpeY attaches phycoerythrobilin to as much as 72% of CpeA, making it one of the most efficient phycoerythrin lyases characterized to date. Phycobilisomes from a cpeY⁻ mutant showed a near native bilin composition in all light conditions except for a slight replacement of phycoerythrobilin by phycourobilin at CpeA cysteine 82. This demonstrates that CpeY is not involved in any chromatic acclimation-driven chromophore changes and suggests that the chromophore attached at cysteine 82 of CpeA in the cpeY⁻ mutant is ligated by an alternative phycoerythrobilin lyase. Although loss of CpeY does not greatly inhibit native phycobilisome assembly in vivo, the highly active recombinant CpeY can be used to generate large amounts of fluorescent CpeA for biotechnological uses.     

Syntheses and chiroptical properties of some derivatives of 1-thioglycerol

A modified synthesis of 3-thio-sn-glycerol which leads to a product of high optical purity is described. The purity was demonstrated by the use of a chiral shift reagent. 3-S-Acetyl- and 3-S-oleyl-3-thio-sn-glycerol as well as 3-acyl derivatives of 3-thio-sn-glycerol have been synthesized. The ORD and CD curves of these compounds as well as of some other derivatives of 3-thio-sn-glycerol were analyzed and discussed. The CD curves of the triacyl derivatives show a positive effect at 260 nm and a negative effect at 230–250 nm.