Carboxyl-coated magnetic nanoparticles for mRNA isolation and extraction of supercoiled plasmid DNA

Carboxyl-coated magnetic nanoparticles (MNPs) were used to demonstrate dual functionality: isolation of messenger RNA (mRNA) from mammalian cells and extraction of the supercoiled (sc) form of plasmid DNA (pDNA) from agarose gel. These MNPs were attached with 5′-NH₂-tagged oligo-(dT)₂₅ primer and were used to isolate mRNA from breast cancer cells. The isolated mRNA was used for amplification of β-actin to confirm the compatibility. These MNPs were also used to extract the sc form of pDNA from agarose gel. The compatibility of the pDNA was demonstrated by restriction digestion. Both of these methodologies are simple, inexpensive (compared with existing kits), and efficient.     

Direct solid phase sequencing of genomic and plasmid DNA using magnetic beads as solid support.

Approaches to direct solid phase sequencing of genomic and plasmid DNA have been developed using magnetic beads, coated with streptavidin, as solid support. The DNA is immobilized through selective incorporation of biotin into one of the strands. A single stranded template, suitable for sequencing, is obtained through strand-specific elution. Using this concept, in vitro amplified plasmid DNA and chromosomal DNA were sequenced directly from single colonies. The solid phase approach ensures that the amplification and the sequencing reactions can be performed under optimal conditions. The system was found to be suitable for sequencing using both isotope- and fluorescent-labelled primers.     

Bacteria capture, lysate clearance, and plasmid DNA extraction using pH-sensitive multifunctional magnetic nanoparticles

A multifunctional magnetic nanoparticle (MNP)-assisted bioseparation method was developed to isolate plasmid DNA (pDNA) from Escherichia coli culture. Using the pH-sensitive carboxyl-modified magnetic nanoparticles, both cell capture and the subsequent removal of genomic DNA/protein complex after lysis can be achieved simply by magnetic separation. Furthermore, the yield and purity of pDNA extracted by MNPs are comparable to those obtained using organic solvents or commercial kits. This time- and cost-effective protocol does not require centrifugation or precipitation steps and has the potential for automated DNA extraction, especially within miniaturized lab chip applications.     

Magnetic bead-based solid phase for selective extraction of genomic DNA

Magnetic bead-based solid phases are widely used for the separation of nucleic acids from complex mixtures. The challenge to selectively separate specific DNA molecules (via complementary hybridization) in a single step is the selection of a linker between the capture probe and the solid support that can be exposed to high temperatures in the presence of a high salt media. This article presents a general platform for the fabrication of a magnetic bead-based selective solid phase that can be used for subtractive hybridization or sequence capture applications. Phosphorus dendrimers are used for the first time as linkers in a magnetic bead-based selective solid phase for capture of genomic DNA. Aside from providing a high loading capacity, they render a stable bond between the capture probe and the surface under the high temperature and salt conditions required for denaturation and capture to proceed in a single step. The thermal stability of the solid phase under these conditions is first demonstrated by hybridizing a Cy3-labeled target. The selective capture of DNA targets in a single step is then demonstrated by subtractive hybridization of fragmented human genomic DNA. The specificity and selectivity of the solid phase are demonstrated by the recovery of adenovirus serotype 4 DNA spiked into the human DNA target. The effect of steric and electrostatic constraints was also investigated by using dendrimers of different generations that vary in their size and the number of branches. The results demonstrate that this platform can be used for single-step subtractive hybridization applications with better performance over the conventional two-step method using streptavidin-coated magnetic beads.     

One-stop genomic DNA extraction by salicylic acid-coated magnetic nanoparticles

Salicylic acid-coated magnetic nanoparticles were prepared via a modified one-step synthesis and used for a one-stop extraction of genomic DNA from mammalian cells. The synthesized magnetic particles were used for magnetic separation of cells from the media by nonspecific binding of the particles as well as extraction of genomic DNA from the lysate. The quantity and quality were confirmed by agarose gel electrophoresis and polymerase chain reaction. The entire process of extraction and isolation can be completed within 30 min. Compared with traditional methods based on centrifugation and filtration, the established method is fast, simple, reliable, and environmentally friendly.     

Temperature-dependent selective purification of plasmid DNA using magnetic nanoparticles in an RNase-free process

The efficiency of transformation by electroporation has been known to be compromised by strain dependency. A high efficiency protocol is still lacking for distinct two-hybrid yeast strains of diverse genetic features. Here, we used 0.5 M lithium acetate (LiAc) and 50 mM Tris-HCl with 5 mM EDTA (pH 7.5), i.e., fivefold the standard concentrations, and voltage at 1.0 to develop a protocol which, for the first time, is able to effect an average efficiency of 1.84 × 10⁶ transformants/μg DNA for three commonly used yeast strains committed to two-hybrid screening experiments.     

Temperature-dependent selective purification of plasmid DNA using magnetic nanoparticles in an RNase-free process

Carboxyl group-functionalized magnetic nanoparticles were used to develop an RNase-free method for plasmid DNA (pDNA) purification directly from RNA-containing crude Escherichia coli lysates. This method takes advantage of differing adsorption behaviors of pDNA and RNA onto magnetic nanoparticle surfaces at different temperatures. Pure pDNA can be isolated between 70 and 80 °C without sacrificing DNA quality and quantity, as evidenced by comparison with that obtained using organic solvents or commercial kits. This RNase-free method is rapid, simple, cost-effective, and environmentally friendly, and it can be easily scaled up for the production of pharmacological-grade pDNA.     

Applications of magnetic surface imprinted materials for solid phase extraction of levofloxacin in serum samples

In this work, molecularly imprinted magnetic carbon nanotubes (MCNTs@MIPs) was prepared with surface imprinting technique for extraction of levofloxacin in serum samples. The preparation of molecularly imprinted polymers (MIPs) used levofloxacin as template, methacrylic acid as functional monomer, and ethylene glycol dimethacrylate as cross‐linker, and the magnetic carbon nanotubes (MCNTs) was synthesized by solvothermal method. The prepared polymers not only can be separated and collected easily by an external magnetic, but also exhibited high specific surface area and high selectivity to template molecules. Kinetic adsorption and static adsorption capacity investigations indicated that the synthesized MCNTs@MIPs had excellent recognition towards levofloxacin. Furthermore, magnetic solid phase extraction (MSPE) using the prepared MCNTs@MIPs as sorbent was then investigated, and an efficient sample cleanup was obtained with recoveries ranged from 78.7 ± 4.8 % to 83.4 ± 4.1%. In addition, several parameters, including the pH of samples, the amount of MCNTs@MIPs, the adsorption and desorption times, and the eluent, were investigated to obtain optimal extraction efficiency. Under the optimal extraction conditions, the stability of the polymer was also evaluated, and the average recovery reduced less than 7.6% after 5 cycles. MCNTs@MIPs successfully applied in the preconcentration and determination of levofloxacin in serum sample suggested that the MSPE method based on the novel polymers could be a promising alternative for selective and efficient extraction of trace amounts of pharmaceutical substances in bio‐matrix samples. Copyright © 2015 John Wiley & Sons, Ltd.     

Application of superparamagnetic nanoparticles in purification of plasmid DNA from bacterial cells

The aim of this study was to develop a simple and rapid method for purification of ultrapure supercoiled plasmid DNA with high yields from bacterial cultures. Nanosized superparamagnetic nanoparticles (Fe3O4) were prepared by chemical precipitation method using Fe2+, Fe3+ salt, and ammonium hydroxide under a nitrogen atmosphere. The surface of Fe3O4 nanoparticles was modified by coating with the multivalent cationic agent, polyethylenimine (PEI). The nanoparticles were characterized by transmission electron microscopy, X-ray diffraction, Fourier transformation infrared spectroscopy and superconducting quantum interference device magnetometer. The PEI-modified magnetic nanobeads were employed to simplify the purification of plasmid DNA from bacterial cells. We demonstrated a useful plasmid, pRSETB-EGFP, encoding the green fluorescent protein with T7 promoter, was amplified in DE3 strain of Escherichia coli. The loaded nanobeads are recovered by magnetically driven separation and regenerated by exposure to the elution buffer with optimal ionic strength (1.25 M) and pH (9.0). Up to approximately 35 microg of high-purity (A260/A280 ratio=1.87) plasmid DNA was isolated from 3ml of overnight bacterial culture. EGFP expression was detected by fluorescent microscopy in the transformed E. coli cells, indicating the biological activities of DNA fragments were retained after purified from magnetic nanobeads. The protocol, starting from the preparation of bacterial lysate and ending with purified plasmids takes less than 10 min. Thus, the separation and purification qualities of PEI-modified magnetic nanobeads as well as its ease of use surpass those of conventional anion-exchange resins.     

超声波辅助抽提法在孔雀石绿分子印迹固相萃取中的应用

采用沉淀聚合法制备孔雀石绿分子印迹聚合物(MG-MIPs),以洗脱效率及吸附量为指标,考察超声波辅助抽提法对MIPs中MG洗脱效果及吸附性能的影响,通过扫描电镜观察MIPs的表面形态,并对其吸附性能进行研究。结果表明:模板分子MG在超声30 min、超声10次、料液比m(MG-MIPs)∶V(甲醇-乙酸溶液)为1∶10(g/m L)、温度为25℃、超声功率为270 W的条件下,洗脱效果最好,MIPs在固相萃取柱中的吸附效率较高,达到198μg/g。     

Permanent magnet actuation for magnetic bead-based DNA extraction

Background

Recently, automatic molecular diagnostic devices to extract DNA have been extensively developed using magnetic beads. While various methods can be applied to the control of the beads, the efficiency of the control when incorporated in automatic devices has not been studied. This paper proposes a compact magnet actuation method for the control of magnetic beads for DNA extraction, and compares the efficiency to the already available magnetic bead-based DNA extraction device. A permanent magnet was preferred for its compactness, while an electro-magnet provides easy operation. After investigating various methods to actuate the magnet with perspective to the size, circuit complexity, and power requirement, we determined the solenoid actuation method to be most efficient. To further reduce the dimension of the overall actuation device, direct actuation of the permanent magnet to control the hold/release of the beads was employed in this paper. The proposed method was compared with the conventional solenoid actuator with a metal plunger. An experimental fluidics device was set up with a fluidic channel and a syringe pump. The bead holding performance against the fluid speed was tested while a fixed amount of beads was loaded into the center of the channel. The group velocity of the beads was analyzed via image processing to determine whether the magnet was sufficient to hold the beads. The required power and space was analyzed and compared qualitatively and quantitatively.

Result

The proposed direct actuation method was capable of holding the beads at faster fluidic speed than the conventional solenoid actuator. The required power was comparable contemplating the high initial power of the solenoid actuator, and required much smaller space since no plunger was needed.

Conclusions

The direct actuation of the permanent magnet using a solenoid coil showed enhanced performance in holding the beads via permanent magnet, with less complexity of the actuation circuit and space. The proposed method therefore can efficiently improve the overall performance of the bead-based DNA extraction.

     

A rapid alkaline extraction procedure for screening recombinant plasmid DNA.

A procedure for extracting plasmid DNA from bacterial cells is described. The method is simple enough to permit the analysis by gel electrophoresis of 100 or more clones per day yet yields plasmid DNA which is pure enough to be digestible by restriction enzymes. The principle of the method is selective alkaline denaturation of high molecular weight chromosomal DNA while covalently closed circular DNA remains double-stranded. Adequate pH control is accomplished without using a pH meter. Upon neutralization, chromosomal DNA renatures to form an insoluble clot, leaving plasmid DNA in the supernatant. Large and small plasmid DNAs have been extracted by this method.     

Separation of lipid classes by solid phase extraction

A rapid and reliable method for the separation of lipid classes is described using aminopropyl disposable columns. This method is a modification to an existing procedure that allows the separation of both neutral and acidic phospholipid fractions and a high recovery of the latter. Acidic phospholipids were eluted with a mixture of hexane-2-propanol-ethanol-0.1 M ammonium acetate-formic acid 420:350:100:50:0.5 containing 5% phosphoric acid after neutral phospholipids had been eluted with methanol. It was verified that extremely high recoveries of cholesterol (CH), triglycerides (TG), free fatty acids (FFA), phosphatidylcholine (PC), phosphatidylethanolamine (PE), phosphatidylinositol (PI), phosphatidylserine (PS), phosphatidic acid (PA), sphingomyelin (SM), and cerebrosides were obtained with this method. In addition, there appeared to be no preferential losses or degradation of any particular molecular species as the fatty acid distribution of bovine brain PS and the molecular species profile of plant PI were unaltered by the procedure. Depending on the tissue, this method may yield fractions containing pure lipid classes and/or simple mixtures of lipid classes of similar polarity. These fractions may then be more easily separated by thin-layer chromatography or high performance liquid chromatography for a complete lipid class analysis.     

Reverse micellar extraction systems for the purification of pharmaceutical grade plasmid DNA

Plasmid DNA as an active pharmaceutical ingredient (API) is gaining more and more importance. For the production of multigram quantities of this substance robust and scalable processes comprising several purification steps have to be designed. One main challenge is the initial separation of plasmid DNA and RNA in such a purification scheme. In this study we investigated the distribution of plasmid DNA and RNA in reverse micellar two-phase systems which is considered to be the basis for the development of an extractive purification step that can easily be integrated into common processes. For this purpose the distribution of the 4.6kb plasmid pUT649 and Escherichia coli RNA in systems comprising isooctane, ethylhexanol, and the surfactant methyltrioctylammoniumchloride (TOMAC) under the influence of different salts was studied. Anion concentrations at which the partitioning behaviour for nucleic acids inverted (inversion point) were identified. Systems capable of separating RNA from plasmid DNA were further analysed and applied to extract RNA from plasmid DNA out of a preconditioned cleared lysate. The capability of reverse micellar systems for plasmid form separation was also shown by capillary and agarose gel electrophoresis.     

A simple method for the direct extraction of plasmid DNA from yeast

Summary A rapid and simple method for the small scale isolation of shuttle plasmid DNA from Saccharomyces cerevisiae is described. It uses glass beads to break cells and reagents which are also used in bacterial mini-preps to yield plasmid DNA without chromosomal contamination in sufficient quantities to enable direct visualisation on agarose gels.     

Variation of strand break yield for plasmid DNA irradiated with high-Z metal nanoparticles

Using agarose gel electrophoresis, we measured the effectiveness of high-Z metal particles of different sizes on SSB and DSB yields for plasmid DNA irradiated with 160 kVp X rays. For plasmid samples prepared in Tris-EDTA buffer, gold nanoparticles were shown to increase G'(SSB) typically by a factor of greater than 2 while G'(DSB) increased by a factor of less than 2. Similar dose-modifying effects were also observed using gold microspheres. Addition of 10(-1) M DMSO typically decreased damage yields by a factor of less than 0.5. Plasmid samples prepared in PBS showed significantly different damage yields compared to those prepared in Tris-EDTA (P < 0.001) with G'(SSB) and G'(DSB) increasing by factors of 100 and 48, respectively. Furthermore, addition of gold nanoparticles to samples prepared in PBS decreased G'(SSB) and G'(DSB) by factors of 0.2 and 0.3, respectively. The results show plasmid damage yields to be highly dependent on differences in particle size between the micro- and nanometer scale, atomic number (Z) of the particle, and scavenging capacity of preparation buffers. This study provides further evidence using a plasmid DNA model system for the potential of high-Z metal nanoparticles as local dose-modifying agents.     

Molecular imprinting and solid phase extraction of flavonoid compounds

Molecularly imprinted polymers (MIPs) for quercetin have been successfully prepared by a thermal polymerization method using 4-vinylpyridine (4-VP) and ethylene glycol dimethacrylate (EDMA) as functional monomer and cross-linker, respectively. The obtained molecularly imprinted polymers were evaluated by HPLC using organic eluents, with respect to their selective recognition properties for quercetin and related compounds of the flavonoid class. Two equivalent control polymers, a blank polymer and a polymer imprinted with a structural analogous template, were synthesized, in order to confirm the obtained results. Furthermore, preliminary experiments confirm the applicability of the prepared MIPs for solid phase extraction (SPE), as rapid and facile clean-up of wine samples for HPLC analysis is an envisaged field of application. The successful preparation of molecularly imprinted polymers for flavones provides an innovative opportunity for the development of advanced separation materials, with applications in the field of wine and fermentation analysis.     

Isolation and purification of recombinant proteins, antibodies and plasmid DNA with hydroxyapatite chromatography

Hydroxyapatite and related stationary phases increasingly play a role in the downstream processing of high-value biological materials, such as recombinant proteins, therapeutic antibodies and pharmaceutical-grade plasmid DNA. Chromatographic hydroxyapatite is an inorganic, ceramic material identical in composition, if not in structure, to calcium phosphate found in human bones and teeth. The interaction of hydroxyapatite with biomacromolecules is complex and highly dynamic, which can make predicting performance difficult, but also allows the design of very selective isolation processes. This review discusses the currently commercially available chromatographic materials, different retention mechanisms supported by these materials and differential exploitation for the design of highly specific isolation procedures. The state of the art of antibody purification by hydroxy- and fluoroapatite is reviewed together with tested routines for method development and implementation. Finally, the isolation of plasmid DNA is discussed, since the purification of DNA therapeutics at a sufficiently large scale is an emerging need in bioprocess development and perhaps the area in bioseparation where apatite chromatography can make its most important contribution to date.     

A solid phase method of determining DNA sequence

A solid-phase method for DNA sequencing has been developed which involves immobilization of the terminally labeled DNA fragment on the DEAE-paper followed by chemical modification and cleavage at G, A + G, C + T, and C sites. As compared to the Maxam and Gilbert method, the new technique is more rapid and less laborious, being of the same efficiency.     

A continuous method for the large-scale extraction of plasmid DNA by modified boiling lysis

This protocol describes a streamlined method of plasmid DNA extraction by continual thermal lysis, a modification of the basic boiling lysis technique, to simplify the processing of large volumes of Escherichia coli cultures. Fermented bacteria are harvested using a hollow fiber-membrane module and pre-treated with lysozyme prior to passing through a thermal exchange coil set at 70 degrees C to lyse the cells, and into a juxtaposed cooling coil on ice. The lysed and cooled bacteria are subsequently separated from the lysate by centrifugation and plasmid DNA is precipitated from the supernatant for further purification. The use of peristaltic pumps and two heating coils at constant temperature without the use of centrifugation enable the lysis process to become constant and controllable, providing a flow-through protocol for cell lysis and plasmid DNA extraction. Large volumes of bacterial cultures (20 l) can be processed in 2 h, yielding approximately 100 mg plasmid DNA l(-1) culture, making this an attractive protocol for consistent and large-scale preparation of plasmid DNA.