Ultrastructural studies of sporulation in Bacillus sphaericus.

Spore septum formation in Bacillus sphaericus 9602 occurs 2 h after the end of exponential growth at one end of the vegetative cell, which retains a uniform diameter. The apparently rigid spore septum contains an inner cell wall layer which disappears when the sporulation septum "bulges" into the mother cell cytoplasm. This process occurs simultaneously with terminal swelling at the end of the cell containing the spore septum. It is suggested that the inner cell wall layer is peptidoglycan and that its dissolution and the terminal swelling are consequences of a localized autolysis. Engulfment of the forespore by membrane proliferation results in the production of a forespore surrounded by two flexible, closely apposed membranes. These membranes appear to become more rigid as a peptidoglycan-like layer appears between them, concomitant with the condensation of the forespore nucleoid into a crescent-shaped structure. After nuclear condensation, visible development of distinct cortex, primordial cell wall, and spore coat layers begin, and the forespore cytoplasm assumes an appearance similar to that of a refractile spore. The spore coats consist of an amorphous inner layer, a lamellar midlayer, and a structured outer layer. As cortex synthesis and spore coat assembly continue, exosporium development commences close to that portion of the mother cell plasma membrane which surrounds the forespore. The exosporium is lamellar and in tangential section is seen to have a hexagonal arrangement of subunits. The timing of these morphological events has the expected correlation with the appearance of unique enzyme activites required for cortex synthesis.     

Dynamics of the assembly of a complex macromolecular structure--the coat of spores of the bacterium Bacillus subtilis

The coat is the outermost layer of spores of many Bacillus species, and plays a key role in these spores' resistance. The Bacillus subtilis spore coat contains > 70 proteins in four distinct layers: the basement layer, inner coat, outer coat and crust. In this issue of Molecular Microbiology, McKenney and Eichenberger study the dynamics of spore coat assembly using GFP-fusions to 41 B. subtilis coat proteins. A key finding in the work is that formation of the spore coat is initiated by the apparently simultaneous assembly of foci of proteins from all four coat layers on the developing spore just as forespore engulfment by the mother cell begins. The expansion of these foci before completion of forespore engulfment then sets up the scaffold to which coat proteins added later in sporulation are added. This study provides new understanding of the mechanism of the assembly of a multi-protein, multi-lamellar structure.     

Subcellular localization of a germiantion-specific cortex-lytic enzyme, SleB, of Bacilli during sporulation

The subcellular localization of a germination-specific cortex-lytic enzyme, SleB, of Bacillus subtilis during sporulation was observed by using fusions of N-terminal region of SleB to the green fluorescent protein (GFP). A fusion with a putative peptidoglycan-binding motif (SleB1-108-GFP) formed a fluorescent ring around the forespore of the wild type strain, as expected from the known location of the intact SleB in the dormant spore. SleB1-108-GFP formed a similar fluorescent ring around the forespore of the gerE mutant which has a severe defect in the coat structure, and of the cwlD mutant which lacks a muramic delta-lactam unique to the spore peptidoglycan (cortex), whereas the fusion could not attach to the spore of the cwlDgerE mutant. By contrast, a fusion without the motif (SleB1-45-GFP) could not be recruited around the forespore of the gerE mutant though it appeared to be accumulated on the outside of the spore of the wild type strain. Since SleB was shown to degrade only the cortex with muramic delta-lactam, these results suggested that a proper localization of SleB requires a strict interaction between the motif of the enzyme and the delta-lactam structure of the cortex, not the formation of normal coat layer.     

Condensation of the forespore nucleoid early in sporulation of Bacillus species.

Fluorescence microscopic examination coupled with digital videoimage analysis of 4',6-diamidino-2-phenylindole-stained sporulating cells of Bacillus megaterium or Bacillus subtilis revealed a striking condensation of the forespore nucleoid. While both mother cell and forespore compartments had equal amounts of DNA, the forespore nucleoid became greater than 2-fold more condensed than the mother cell nucleoid. The condensation of the forespore nucleoid began after only the first hour of sporulation, 2 to 3 h before expression of most forespore-specific genes including those for small, acid-soluble spore proteins, and was abolished in spo0 mutants but not in spoII or spoIII mutants. It is possible that this striking condensation of forespore DNA plays some role in modulating gene expression during sporulation.     

GerM is required to assemble the basal platform of the SpoIIIA–SpoIIQ transenvelope complex during sporulation in Bacillus subtilis

Sporulating Bacillus subtilis cells assemble a multimeric membrane complex connecting the mother cell and developing spore that is required to maintain forespore differentiation. An early step in the assembly of this transenvelope complex (called the A–Q complex) is an interaction between the extracellular domains of the forespore membrane protein SpoIIQ and the mother cell membrane protein SpoIIIAH. This interaction provides a platform onto which the remaining components of the complex assemble and also functions as an anchor for cell–cell signalling and morphogenetic proteins involved in spore development. SpoIIQ is required to recruit SpoIIIAH to the sporulation septum on the mother cell side; however, the mechanism by which SpoIIQ specifically localizes to the septal membranes on the forespore side has remained enigmatic. Here, we identify GerM, a lipoprotein previously implicated in spore germination, as the missing factor required for SpoIIQ localization. Our data indicate that GerM and SpoIIIAH, derived from the mother cell, and SpoIIQ, from the forespore, have reciprocal localization dependencies suggesting they constitute a tripartite platform for the assembly of the A–Q complex and a hub for the localization of mother cell and forespore proteins.     

Fine Structure of Bacillus megaterium during Microcycle Sporogenesis

Ultrathin sections were prepared from cultures of Bacillus megaterium QM B1551 undergoing microcycle sporogenesis (initial spore to primary cell to second-stage spore without intervening cell division) on a chemically defined medium. The cytoplasmic core of the dormant spore was surrounded by plasma membrane, cell-wall primordium, cortex, outer cortical layer, and spore coats. Early in the cycle, the coat opened at the germinal groove, the cortex swelled, ribosomes and a chromatinic area associated with large mesosomes (which may later be incorporated into the expanding plasma membrane) appeared in the core, and the cell wall became defined at the site of the cell wall primordium. Poly-β-hydroxybutyrate granules began to appear in the primary cell at about 3 hr. By 7 hr, the forespore of the second-stage spore was delineated by typical double membranes. Between 7 and 12 hr, second-stage cell-wall primordium and cortex developed between the separating forespore membranes. The inner membrane became the plasma membrane of the second-stage spore, and the outer membrane eventually disintegrated within the second-stage spore cortex. A densely staining double layer (spore-coat primordium) developed external to the outer forespore membrane. The inner spore coat and the outer cortical layer of the second-stage spore developed from this primordium. The outer part of the spore coat, probably of sporangial origin, was laid down on the external surface of the inner spore coat. By 12 hr, second-stage spores were almost mature. By 20 hr, the mature endospores, with a thickened outer coat, were often still enclosed by degenerate primary cell wall and by the outer cortical layer and spore coat of the initial spore.     

Electron microscopy of two subcellular fractions isolated from cerebral cortex homogenate

The sporulation process in Bacillus subtilis has been studied principally with KMnO(4) fixation, but also, for the purpose of comparison, with OsO(4) and mixtures of both fixatives. At a very early stage, the pre-spore is seen to consist of what seems to be the nuclear material and granular substance, surrounded by a layer of dense material destined to become the innermost layer of the spore coat. At a subsequent stage, a light interspace is observed that is destined to become the spore cortex. The mature spore shows a very complex structure. The spore coat is composed of three layers, the middle layer of which consisted of 5 to 8 lamellae of thin membranes and interspaces, both about 20 to 25 A thick. Between the inner layer of the spore coat and the spore cortex, a thin membrane with an affinity to the cortex can be observed. The spore coat is enclosed within two envelopes, one loosely surrounding the core, and the other adhering to it. The process of spore maturation has been studied in detail. Certain peculiar cellular structures have been observed that seemed to represent features of abnormal sporulation processes.     

Fine Structure of Bacillus subtilis : II. Sporulation Progress

The sporulation process in Bacillus subtilis has been studied principally with KMnO₄ fixation, but also, for the purpose of comparison, with OsO₄ and mixtures of both fixatives. At a very early stage, the pre-spore is seen to consist of what seems to be the nuclear material and granular substance, surrounded by a layer of dense material destined to become the innermost layer of the spore coat. At a subsequent stage, a light interspace is observed that is destined to become the spore cortex. The mature spore shows a very complex structure. The spore coat is composed of three layers, the middle layer of which consisted of 5 to 8 lamellae of thin membranes and interspaces, both about 20 to 25 A thick. Between the inner layer of the spore coat and the spore cortex, a thin membrane with an affinity to the cortex can be observed. The spore coat is enclosed within two envelopes, one loosely surrounding the core, and the other adhering to it. The process of spore maturation has been studied in detail. Certain peculiar cellular structures have been observed that seemed to represent features of abnormal sporulation processes.     

Fine structure of sporulation in Bacillus cereus grown in a chemically defined medium

Ellar, D. J. (Syracuse University, Syracuse, N.Y.), and D. G. Lundgren. Fine structure of sporulation in Bacillus cereus grown in a chemically defined medium. J. Bacteriol. 92:1748-1764. 1966.-A study was made of the fine structure of sporulating cells of Bacillus cereus grown in a chemically defined medium. The developmental stages of sporulation occurred in a fairly synchronous manner and were complete by 14 hr. This time period was shortened when spore wall peptide components were added to the medium, but the addition had no effect upon fine structure except to thicken the cell wall. Sporulation could be separated into six morphological stages which generally agreed with those published for other sporulating bacteria. The initiation of the spore (forespore) septum takes the form of an inward folding of the cytoplasmic membrane toward the pole of the cell. The inward folding forms a characteristic Y-shaped membrane structure enclosing an area within which vesicles are found. These vesicles comprise the perisporal mesosome of the cell. The membranes on opposite sides of the cell progress toward the cell center where they fuse to form the double unit membrane of the spore septum. As the proliferation of the spore septum continues, the vesicular areas move towards the pole. The end result is a double forespore membrane which completely encloses a part of the vegetative cell's chromatin. Sporal mesosomes, as well as membrane vesicles, are involved in the proliferation of the forespore. Vesicles are generally bounded by a single unit membrane, whereas in the sporal mesosomes several unit membranes are arranged concentrically. The latter become associated with the segregation of a portion of the nuclear material into the forespore region of the cell.     

Incorporation of Glycine and Serine into Sporulating Cells of Bacillus subtilis

The changes during growth and sporulation in activities of cells of Bacillus subtilis to incorporate various amino acids were investigated with wild-type strain and its asporogenous mutant. In the case of wild type strain the uptake of valine, phenylalanine, and proline was largest during the logarithmic growth period. The uptake of these amino acids decreased rapidly during the early stationary phase. The uptake of valine and cysteine increased again to some extent just prior to the forespore stage. The uptake of glycine and serine, however, was largest at the forespore stage at which the formation of spore coat took place. From these observed phenomena it was assumed that the remarkable incorporation of glycine and serine into the wild type strain during sporulation was closely related to the formation of spore coat.     

Sporulation in Bacillus subtilis. Morphological changes

1. When Bacillus subtilis was grown in a medium in which sporulation occurred well-defined morphological changes were seen in thin sections of the cells. 2. Over a period of 7.5hr. beginning 2hr. after the initiation of sporulation the following major stages were observed: axial nuclear-filament formation, spore-septum formation, release of the fore-spore within the cell, development of the cortex around the fore-spore, the laying down of the spore coat and the completion of the corrugated spore coat before release of the spore from the mother cell. 3. The appearance of refractile bodies and 2,6-dipicolinic acid and the development of heat-resistance began between 5 and 6.5hr. after initiation of sporulation. 4. The appearance of 2,6-dipicolinic acid and the onset of refractility appeared to coincide with a diminution of electron density in the spore core and cortex. 5. Heat-resistance was associated with the terminal stage, the completion of the spore coat. 6. The spore coat was composed of an inner and an outer layer, each of which consisted of three or four electron-dense laminae. 7. Serial sections through cells at an early stage of sporulation showed that the membranes of each spore septum were always continuous with the membranes of a mesosome, which was itself in close contact with the bacterial or spore nucleoid. 8. These changes were correlated with biochemical events occurring during sporulation.     

Fine structure of mesosomal involvement during Bacillus macerans sporulation.

The ultrastructure of endospore formation in Bacillus macerans ATCC 8244 is characterized by the examination of thin sections of cells grown synchronously in a defined medium. For the most part, sporulation in this organism proceeds as described in other Bacillus species. However, unusually extensive mesosomal involvement occurs during the early stages of sporulation, through the completion of engulfment. A large mesosome is associated with spore septum formation and a portion of this mesosome is included in the developing forespore. As engulfment continues, the forespore mesosome moves to the apex of the cell and participates in the completion of the double forespore membrane. This participation is morphologically similar to mesosome involvement in division and spore septation and seems to comprise a second sporal septation process. Based on this study, it is suggested that the mesosome functions to facilitate the "fusion" of membranes thought to occur during cell division and sporulation.     

Dynamic patterns of subcellular protein localization during spore coat morphogenesis in Bacillus subtilis

Endospores of Bacillus subtilis are encased in a thick, proteinaceous shell known as the coat, which is composed of a large number of different proteins. Here we report the identification of three previously uncharacterized coat-associated proteins, YabP, YheD, and YutH, and their patterns of subcellular localization during the process of sporulation, obtained by using fusions of the proteins to the green fluorescent protein (GFP). YabP-GFP was found to form both a shell and a ring around the center of the forespore across the short axis of the sporangium. YheD-GFP, in contrast, formed two rings around the forespore that were offset from its midpoint, before it eventually redistributed to form a shell around the developing spore. Finally, YutH-GFP initially localized to a focus at one end of the forespore, which then underwent transformation into a ring that was located adjacent to the forespore. Next, the ring became a cap at the mother cell pole of the forespore that eventually spread around the entire developing spore. Thus, each protein exhibited its own distinct pattern of subcellular localization during the course of coat morphogenesis. We concluded that spore coat assembly is a dynamic process involving diverse patterns of protein assembly and localization.     

MORPHOLOGY OF SPORE DEVELOPMENT IN CLOSTRIDIUM PECTINOVORUM.

Fitz-James, Philip C. (University of Western Ontario, London, Ont., Canada). Morphology of spore development in Clostridium pectinovorum. J. Bacteriol. 84:104-114. 1962-The process of spore formation in Clostridium pectinovorum was followed by phase-contrast microscopy and by thin-section electron microscopy employing a polyester plastic for embedding. The development of the forespore membrane was found to be similar to that already described for the genus Bacillus, being, in addition, accompanied by considerable cell enlargement. The cortex, as in the bacilli, was found between the apposed layers of the double forespore membrane. The spore coat was laid down in the narrow zone of cytoplasm peripheral to the outer forespore membrane. As these layers formed, striking changes occurred in the fine structure of the spore nuclear material, mesosomes and ribosomes, reflecting the marked alterations in physical environment known to occur in a developing spore.     

Interference Contrast and Phase Contrast Microscopy of Sporulation and Germination of Bacillus megaterium

The techniques of Nomarski interference contrast microscopy and phase-contrast microscopy were compared for their utility in monitoring sporulation and germination in Bacillus megaterium. The Nomarski technique permitted rapid and easy delineation of septation and engulfment during sporulation, whereas with phase contrast microscopy these stages were not detected at all. The later stages of sporulation were easily seen by either technique. Thus, of the seven stages of sporulation as recognized by the electron microscopy of thin sections, five can now be routinely detected quantitatively by optical microscopy: septation (stage II), engulfment (stage III), phase-dark forespore (corresponding to cortex formation, stage IV), phase-bright spore in a sporangium (corresponding to coat formation, stage V), and the free spore (stage VII). This means that now only stage I (axial filament) and stage VI (maturation of the refractile spore) require electron microscopy for routine detection. There was no advantage in using Nomarski optics for germination studies.     

FORMATION AND STRUCTURE OF THE SPORE OF BACILLUS COAGULANS

Spore formation in Bacillus coagulans has been studied by electron microscopy using an epoxy resin (Araldite) embedding technique. The developmental stages from the origin of the initial spore septum to the mature spore were investigated. The two forespore membranes developed from the double layer of cytoplasmic membrane. The cortex was progressively deposited between these two membranes. The inner membrane finally became the spore protoplasmic membrane, and the outer membrane part of the inner spore coat or the outer spore coat itself. In the mature spore the completed integuments around the spore protoplasm consisted of the cortex, a laminated inner coat, and a dense outer coat. No exosporium was observed. The method of formation of the cortex and the spore coats is discussed.     

Septal localization of forespore membrane proteins during engulfment in Bacillus subtilis

In Bacillus subtilis, many membrane proteins localize to the sporulation septum, where they play key roles in spore morphogenesis and cell-specific gene expression, but the mechanism for septal targeting is not well understood. SpoIIQ, a forespore-expressed protein, is involved in engulfment and forespore-specific gene expression. We find that SpoIIQ dynamically localizes to the sporulation septum, tracks the engulfing mother cell membrane, assembles into helical arcs around the forespore and is finally degraded. Retention of SpoIIQ in the septum requires one or more mother cell-expressed proteins. We also observed that any forespore-expressed membrane protein initially localizes to the septum and later spreads throughout the forespore membrane, suggesting that membrane protein insertion occurs at the forespore septal region. This possibility provides an attractive mechanism for how activation of mother cell-specific gene expression is restricted to adjacent sister cells, since direct insertion of the signaling protein SpoIIR into the septum would spatially restrict its activity. In keeping with this hypothesis, we find that SpoIIR localizes to the septum and is transiently expressed.