Dependence of the hydration shell structure in the minor groove of the DNA double helix on the groove width as revealed by Monte Carlo simulation.

The hydration shell of several conformations of the polynucleotides poly(dA).poly(dT), poly(dA).poly(dU), and poly(dA-dI).poly(dT-dC) has been simulated using the Monte Carlo method (Metropolis sampling). Calculations have shown that the structure of the hydration shell of the minor groove greatly depends on its width. In conformations with a narrowed minor groove, the first layer of the hydration shell of this groove has only one molecule per nucleotide pair that forms H bonds with purine N3 of one pair and pyrimidine O2 of the next pair. The second layer of the hydration shell of such conformations contains molecules that form H bonds between two adjacent molecules of the first layer. The probability of formation of hydration spine is about 20% while the bridges of the first layer are formed with a probability of about 70%. In the first layer of the minor groove of the B-DNA conformation with wide minor groove there are approximately two water molecules per base pair that form H bonds with purine N3 or pyrimidine O2 and with the sugar ring oxygen of the adjacent nucleotide. The probability of simultaneous H bonding of a water molecule with N3 (or O2) and O of sugar ring is about 30%. The results of simulation suggest that hydration spine proposed for the narrowed minor groove of oligonucleotide crystals [H. R. Drew, and R. E. Dickerson (1981) Journal of Molecular Biology, Vol. 151, pp. 535-556] can be formed in fibers of poly(dA).poly(dT), poly(dA).poly(dU), and poly(dA-dI).poly(dT-dC) as well as in DNA fragments of these sequences in solution.(ABSTRACT TRUNCATED AT 250 WORDS)     

Two binding modes of netropsin are involved in the complex formation with poly(dA-dT).poly(dA-dT) and other alternating DNA duplex polymers

Using CD measurements we show that the interaction of netropsin to poly(dA-dT).poly(dA-dT) involves two binding modes at low ionic strength. The first and second binding modes are distinguished by a defined shift of the CD maximum and the presence of characteristic isodichroic points in the long wavelength range from 313 nm to 325 nm. The first binding mode is independent of ionic strength and is primarily determined by specific interaction to dA.dT base pairs. Employing a netropsin derivative and different salt conditions it is demonstrated that ionic contacts are essential for the second binding mode. Other alternating duplexes and natural DNA also exhibit more or less a second step in the interaction with netropsin observable at high ratio of ligand per nucleotide. The second binding mode is absent for poly(dA).poly(dT). The presence of a two-step binding mechanism is also demonstrated in the complex formation of poly(dA-dT).poly(dA-dT) with the distamycin analog consisting of pentamethylpyrrolecarboxamide. While the binding mode I of netropsin is identical with its localization in the minor groove, for binding mode II we consider two alternative interpretations.     

Anomalous structure and properties of poly (dA).poly(dT). Computer simulation of the polynucleotide structure with the spine of hydration in the minor groove.

The results of the search for low-energy conformations of poly(dA).poly(dT) and of the poly(dA).poly(dT) "complex" with the spine of hydration similar to that found by Dickerson and co-workers (Kopka, M.L., Fratini, A.V., Drew, H.R. and Dickerson, R.E. (1983) J. Mol. Biol. 163, 129-146) in the minor groove of the CGCGAATTCGCG crystals are described. It is shown that the existence of such a spine in the minor groove of poly(dA).poly(dT) is energetically favourable. Moreover, the spine of hydration makes the polynucleotide conformation similar to the poly(dA).poly(dT) structure in fibers and to the conformation of the central part of CGCGAATTCGCG in crystals; it also acquires features characteristic of the structure of poly(dA).poly(dT) and DNA oligo(dA)-tracts in solution. It is shown that the existence of the TpA step in conformations characteristic of the poly(dA).poly(dT) complex with the spine of hydration is energetically unfavourable (in contrast to the ApT step) and therefore this step should result in destabilization of the spine of hydration in the DNA minor groove. Thus, it appears that the spine of hydration as described by Dickerson and co-workers is unlikely to exist in the poly d(A-T).poly d(A-T) structure. The data obtained permit us to interpret a large body of experimental facts concerning the unusual structure and properties of poly(dA).poly(dT) and oligo(dA)-tracts in DNA both in fibers and in solution. The results provide evidence of the existence of the minor groove spine of hydration both in fibers and in solution on A/T tracts of DNA which do not contain the TpA step. The spine plays an active role in the formation of the anomalous conformation of these tracts.     

Temperature dependence of the Raman spectrum of DNA. II. Raman signatures of premelting and melting transitions of poly(dA).poly(dT) and comparison with poly(dA-dT).poly(dA-dT).

The temperature dependence of the Raman spectrum of poly(dA).poly(dT) (dA: deoxyadenosine; dT: thymidine), a model for DNA containing consecutive adenine.thymine (A.T) pairs, has been analyzed using a spectrometer of high spectral precision and sensitivity. Three temperature intervals are distinguished: (a) premelting (10 < t < 70 degrees C), in which the native double helix is structurally altered but not dissociated into single strands; (b) melting (70 < t < 80 degrees C), in which the duplex is dissociated into single strands; and (c) postmelting (80 < t degrees C), in which no significant structural change can be detected. The distinctive Raman difference signatures observed between 10 and 70 degrees C and between 70 and 80 degrees C are interpreted in terms of the structural changes specific to premelting and melting transitions, respectively. Premelting alters the low-temperature conformation of the deoxyribose-phosphate backbone and eliminates base hydrogen bonding that is distinct from canonical Watson-Crick hydrogen bonding; these premelting perturbations occur without disruption of base stacking. Conversely, melting eliminates canonical Watson-Crick pairing and base stacking. The results are compared with those reported previously on poly(dA-dT).poly(dA-dT), the DNA structure consisting of alternating A.T and T.A pairs (L. Movileanu, J. M. Benevides, and G. J. Thomas, Jr. Journal of Raman Spectroscopy, 1999, Vol. 30, pp. 637-649). Poly(dA).poly(dT) and poly(dA-dT).poly(dA-dT) exhibit strikingly dissimilar temperature-dependent Raman profiles prior to the onset of melting. However, the two duplexes exhibit very similar melting transitions, including the same Raman indicators of ruptured Watson-Crick pairing, base unstacking and collapse of backbone order. A detailed analysis of the data provides a comprehensive Raman assignment scheme for adenosine and thymidine residues of B-DNA, delineates Raman markers diagnostic of consecutive A.T and alternating A.T/T.A tracts of DNA, and identifies the distinct Raman difference signatures for premelting and melting transitions in the two types of sequences.     

Hydration of B-DNA: comparison between the water network around poly(dG).poly(dC) and poly(dG-dC).poly(dG-dC) on the basis of Monte Carlo computations

A computational method is elaborated for studying the water environment around regular polynucleotide duplexes; it allows rigorous structural information on the hydration shell of DNA to be obtained. The crucial aspect of this Monte Carlo simulation is the use of periodical boundary conditions. The output data consists of local maxima of water density in the space near the DNA molecule and the properties of one- and two-membered water bridges as function of pairs of polar groups of DNA. In the present paper the results for poly(dG).poly(dC) and poly(dG-dC).poly(dG-dC) are presented. The differences in their hydration shells are of a purely structural nature and are caused by the symmetry of the polar groups of the polymers under study, the symmetry being reflected by the hydration shell. The homopolymer duplex hydration shell mirrors the mononucleotide repeat. The water molecules contacting the polynucleotide in the minor groove are located nearly in the plane midway between the planes of successive base pairs. One water molecule per base pair forms a water bridge facing two polar groups of bases from adjacent base pairs and on different strands making a "spine"-like structure. In contrast, the major groove hydration is stabilized exclusively by two-membered water bridges; the water molecules deepest in the groove are concentrated near the plane of the corresponding base pair. The alternating polymer is characterized by a marked dyad symmetry of the hydration shell corresponding to the axis between two successive base pairs. The minor groove hydration of the dCpdG step resembles the characteristic features of the homopolymer, but the bridge between the O2 oxygens of the other base-stacking type is formed by two water molecules. The major groove hydration is characterized by high probability of one-membered water bridges and by localization of a water molecule on the dyad axis of the dGpdC step. The found structural elements are discussed as reasonable invariants of a dynamic hydration shell.     

Monte-Carlo Simulation of DNA Duplex Hydration. B and B′ Conformations of Poly(dA) · Poly(dT) Have Different Hydration Shells

Abstract

Monte-Carlo simulation of poly(dA) · poly(dT) hydration by 30 water molecules per nucleotide pair has been performed. Two B-family conformations, both with a 36° helical twist but with different minor groove widths, were considered. One conformation is Arnott's standard B form, the other one is specific for poly(dA) · poly(dT) B′ form with a narrowed minor groove. The mean energies and the mean numbers of water-water and water-DNA hydrogen bonds are close for the two conformations. Nevertheless, the hydration shell of the B' form differs drastically from that of the standard B form. The water arrangement in the minor groove of the B′ form resembles the spine of hydration in the central part of Dickerson's dodecamer d(CGCGAATTCGCG). No such spine is formed in the hydration shell of the usual B form with a wider minor groove. In this conformation water bridges between adenine N3 or thymine O2 and oxygen of the sugar ring of the neighbouring nucleotide along the chain can be formed (“strings” in Dickerson's decamer d(CCAAGATTGG)).     

The CD of ligand-DNA systems. 2. Poly(dA-dT) B-DNA.

A systematic theoretical study of the CD of [poly(dA-dT)]2 and its complexes with achiral small molecules is presented. The CD spectra of [poly(dA-dT)]2 and of poly(dA):poly(dT) are calculated for various DNA structures using the matrix method. The calculated and experimental spectra agree reasonably well for [poly(dA-dT)]2 but less well for poly(dA):poly(dT). The calculated CD spectrum of [poly(dA-dT)]2 fails to reproduce the wavelength region of 205-245 nm of the experimental spectrum. This discrepancy can be explained by a magnetic dipole allowed transition contributing significantly to the CD spectrum in this region. The induced CD of a transition moment of a molecule bound to [poly(dA-dT)]2 is also calculated. As was the case for [poly(dG-dC)]2, the induced CD of a groove bound molecule is one order of magnitude stronger than that of an intercalated molecule. The calculations also show considerable differences between pyrimidine-purine sites and purine-pyrimidine sites. Both signs and magnitudes of the CD induced into ligands bound in the minor groove agree with experimental observations.     

Binding of nonintercalative antitumor drugs to DNA-polymers: structural effects of bisquaternary ammonium heterocycles

The binding of the antitumor agents SN-16814 nd SN-13232 to various DNA's in solution was monitored by CD and UV absorption measurements. In addition comparative studies with dA.dT containing duplex DNA of the related ligands SN-6136 and SN-6324 were included with respect to effects of structural variations. In general all four ligands show a dA.dT preference in their binding affinity to DNA. Differences were observed for the reaction of SN-16814 which contains bicyclic ring system: it has a lower base pair selectivity, shows some affinity to poly(dG-dC).poly(dG-dC), poly(rA).poly(rU) and poly(rU). The binding mechanism of SN-16814 is associated with a significant time dependent binding effect in CD spectra and UV absorption in case of reaction with poly(dA).poly(dT) and poly(dI).poly(dC) indicating a slow kinetics. The preferred binding to dA.dT base pairs in DNA decreases in the order from SN-61367 greater than SN-13232 greater than SN-6324,SN-16814 as judged from CD titration studies, salt dissociation and melting temperature data. Competitive binding experiments with netropsin (Nt) or distamycin-5 revealed that SN-16814 and SN-13232 are displaced from poly(dA.dT).poly(dA-dT) suggesting that both ligands are less strongly bound than Nt and Dst-5 within the minor groove of B-DNA. These studies are consistent with results of the DNAse I cleavage of poly(dA-dT).poly(dA-dT) which show the same relative order of inhibition of the cleavage reaction due to ligand binding. The results suggest that the variability of the DNA binding and dA.dT sequence specificity may reside in the adaptability of benzamide-type ligands in the helical groove which is influenced by distinct structural modifications of the ligand conformation.     

Interaction of the nonintercalative antitumour drugs SN-6999 and SN-18071 with DNA: influence of ligand structure on the binding specificity

Binding to DNA's of the non-intercalative ligands SN-6999 and SN-18071 has been studied by means of circular dichroism, UV absorption, thermal melting and for SN-6999 by viscosity measurements. Both antitumour drugs show a preference for dA.dT rich DNA's, but the base pair selectivity of SN-18071 is lower as indicated by some affinity to dG.dC containing duplex DNA. The dA.dT base pair specificity of SN-6999 is comparable to that of netropsin. It forms very stable complexes with dA.dT containing duplex DNA and competes with netropsin binding on DNA. The ligands SN-18071 and pentamidine are totally released from their complexes with poly(dA-dT).poly(dA-dT) by competitive netropsin binding. The results demonstrate that hydrogen bonding capacity of the ligand in addition to other factors strongly contribute to the base sequence specificity in the recognition process of the ligand with DNA. A binding model of SN-6999 with five dA.dT pairs in the minor groove of B-DNA is suggested.     

Binding of Nonintercalative Antitumor Drugs to DNA-Polymers: Structural Effects of Bisquaternary Ammonium Heterocycles

Abstract

The binding of the antitumor agents SN-16814 nd SN-13232 to various DNA's in solution was monitored by CD and UV absorption measurements. In addition comparative studies with dA · dT containing duplex DNA of the related ligands SN-6136 and SN-6324 were included with respect to effects of structural variations. In general all four ligands show a dA · dT preference in their binding affinity to DNA.

Differences were observed for the reaction of SN-16814 which contains bicyclic ring system: it has a lower base pair selectivity, shows some affinity to poly(dG-dC) · poly(dG-dC), poly(rA) · poly(rU) and poly(rU). The binding mechanism of SN-16814 is associated with a significant time dependent binding effect in CD spectra and UV absorption in case of reaction with poly(dA) · poly(dT) and poly(dI) · poly(dC) indicating a slow kinetics.

The preferred binding to dA · dT base pairs in DNA decreases in the order from SN-61367 > SN-13232 > SN-6324, SN-16814 as judged from CD titration studies, salt dissociation and melting temperature data. Competitive binding experiments with netropsin (Nt) or distamycin-5 revealed that SN-16814 and SN-13232 are displaced from poly(dA-dT) · poly(dA-dT) suggesting that both ligands are less strongly bound than Nt and Dst-5 within the minor groove of B-DNA. These studies are consistent with results of the DNAase I cleavage of poly(dA-dT) · poly(dA-dT) which show the same relative order of inhibition of the cleavage reaction due to ligand binding. The results suggest that the variability of the DNAbinding and dA · dT sequence specificity may reside in the adaptability of benzamide-type ligands in the helical groove which is influenced by distinct structural modifications of the ligand conformation.     

Structure of poly(dA).poly(dT) is not identical to the AT rich regions of the single crystal structure of CGCGAATTBrCGCG. The consequence of this to netropsin binding to poly(dA).poly(dT)

The basic assumption of Dickerson and Kopka (J. Biomole. Str. Dyns. 2, 423, 1985) that the conformation of poly(dA).poly(dT) in solution is identical to the AT rich region of the single crystal structure of the Dickerson dodecamer is not supported by any experimental data. In poly(dA).poly(dT), NOE and Raman studies indicate that the dA and dT units are conformationally equivalent and display the (anti-S-type sugar)-conformation; incorporation of this nucleotide geometry into a double helix leads to a conventional regular B-helix in which the width of the minor groove is 8A. The derived structure is consistent with all available experimental data on poly(dA).poly(dT) obtained under solution conditions. In the crystal structure of the dodecamer, the dA and dT units have distinctly different conformations-dA residues adopt (anti, S-type sugar pucker), while dT residues belong to (low anti, N-type sugar pucker). These different conformations of the dA and dT units along with the large propeller twist can be accommodated in a double helix in which the minor groove is shrunk from 8A to less than 4A. In the conventional right handed B-form of poly(dA).poly(dT) with the 8A wide minor groove, netropsin has to bind asymmetrically along the dA strand to account for the NOE and chemical shift data and to generate a stereochemically sound structure (Sarma et al, J. Biomole. Str. Dyns. 2, 1085, 1985).     

Differences in melting behavior between homopolymers and copolymers of DNA: Role of nonbonded forces for GC and the role of the hydration spine and premelting transition for AT

Melting measurements of the mono-base-pair DNA polymers showed that the melting temperature T_m of the B-DNA homopolymer poly (dA ) · poly (dT) is higher than that of the copolymer poly [d(A-T)]. On the other hand, the T_mof the B-DNA homopolymer poly (dG) · poly (dC) is lower than that of the copolymer poly [d (G-C)]. From a structural point of view, the cross-strand base-stacking interaction in a DNA homopolymer is weaker than that in a DNA copolymer with the same base pair. One would then expect that all the DNA homopolymers are less stable than the copolymer with the same base pair. We find that the inversion of the melting order seen in the AT mono-base-pair DNA polymers is caused by the enhanced thermal stability of poly (dA) · poly (dT) from a well-defined spine of hydration attached to its minor groove. In this paper we employ the modified self-consistent phonon theory to calculate base-pair opening probabilities of four B-DNA polymers: poly(dA)-poly(dT), poly(dG) · poly(dC), poly[d(A-T)], and poly[d(G-C)] at temperatures from room temperature through the melting regions. Our calculations show that the spine of hydration can give the inverted melting order of the AT polymers as compared to the GC polymers in fair agreement with experimental measurements. Our calculated hydration spine disruption behavior in poly(dA) · poly(dT) at premelting temperatures is also in agreement with experimentally observed premelting transitions in poly (dA) · poly (dT). The work is in a sense a test of the validity of our models of nonbonded interactions and spine of hydration interactions. We find we have to develop the concept of a strained bond to fit observations in poly (dA) · poly(dT). The strained-bond concept also explains the otherwise anomalous stability of the hydration chain. © 1993 John Wiley & Sons, Inc.     

Synergistic effects in the melting of DNA hydration shell: melting of the minor groove hydration spine in poly(dA).poly(dT) and its effect on base pair stability.

We propose that water of hydration in contact with the double helix can exist in several states. One state, found in the narrow groove of poly(dA).poly(dT), should be considered as frozen to the helix, i.e., an integral part of the double helix. We find that this enhanced helix greatly effects the stability of that helix against base separation melting. Most water surrounding the helix is, however, melted or disassociated with respect to being an integral part of helix and plays a much less significant role in stabilizing the helix dynamically, although these water molecules play an important role in stabilizing the helix conformation statically. We study the temperature dependence of the melting of the hydration spine and find that narrow groove nonbonded interactions are necessary to stabilize the spine above room temperature and to show the broad transition observed experimentally. This calculation requires that synergistic effects of nonbonded interactions between DNA and its hydration shell affect the state of water-base atom hydrogen bonds. The attraction of waters into narrow groove tends to retain waters in the groove and compress or strain these hydrogen bonds.     

DNA curvature does not require bifurcated hydrogen bonds or pyrimidine methyl groups.

Short tracts of the homopolymer dA.dT confer intrinsic curvature on the axis of the DNA double helix. This phenomenon is assumed to be a consequence of such tracts adopting a stable B'-DNA conformation that is distinct from B-form structure normally assumed by other DNA sequences. The more stable B' structure of dA.dT tracts has been attributed to several possible stabilizing factors: (1) optimal base stacking interactions consequent upon the high propeller twist, (2) bifurcated hydrogen bonds between adjacent dA.dT base-pairs, (3) stacking interactions involving the dT methyl groups, and finally (4) a putative spine of ordered water molecules in the minor groove. DNA oligodeoxynucleotides have been synthesized that enable these hypotheses to be tested; of particular interest is the combination of effects due to bifurcation (2) and methylation of the pyrimidines nucleotides (3). The data indicate that neither bifurcated hydrogen bonds nor pyrimidine methyl groups nor both are essential for DNA curvature. The data further suggest that the influence of the minor groove spine of hydration on the B'-formation is small. The experiments favor the hypothesis that base stacking interactions are the dominant force in stabilizing the B'-form structure.     

Infrared and Raman studies show that poly(dA).poly(dT) and d(AAAAATTTTT)2 exhibit a heteronomous conformation in films at 75% relative humidity and a B-type conformation at high humidities and in solution

The decadeoxynucleotide d(AAAAATTTTT)2 in duplex form and the double-helical polynucleotide poly(dA).poly(dT) have been studied by Raman and infrared (IR) spectroscopy under a variety of environmental conditions. The IR spectra have been taken of cast films and compared to the IR spectra of the alternating poly(dA-dT), which shows clear B-genus and A-genus vibrational spectra under conditions of high (greater than 92%) and low (75%) relative humidity (RH). From the IR data, it is shown that d-(AAAAATTTTT)2 and poly(dA).poly(dT) adopt a B-genus conformation in films with high water content. When the relative humidity of the film is decreased, the IR spectra reflect a gradual evolution of the geometry of both d(AAAAATTTTT)2 and poly(dA).poly(dT) into a form intermediate between the B genus and A genus, but the IR spectrum of a pure A genus has not been obtained. In these DNAs at 75% RH, the IR bands of adenosine have the same frequencies as those found in poly(dA-dT) at 75% RH where the local furanose conformation is C3' endo/anti, but the thymidine frequencies do not resemble those of poly(dA-dT) at 75% RH but rather those of poly(dA-dT) at high humidities. It is concluded that both poly(dA).poly(dT) and d(AAAAATTTTT)2 adopt a fully heteronomous duplex geometry in cast films at low humidity. For studies in aqueous solution the Raman effect was employed. As a model for the heteronomous conformation in solution, the duplex poly(rA).poly(dT) was used.(ABSTRACT TRUNCATED AT 250 WORDS)     

Interaction Specificity of Benzimidazol Group Compounds with AT-Containing Polynucleotides

Abstract

The interaction between polynucleotides: poly(dA)-poly(dT), poly(dA-dT), poly(am2dA- dT), and the AT-specific compounds of benzimidazol group has been studied. It is been shown that these compounds bind to poly(dA)-poly(dT) and poly(dA-dT) at low and high salt concentration in solution. Poly(am2dA-dT) interacts with AT-specific compounds only at low salt, where this polynucleotide is in a B-form, but not at high salt when the polynucleotide converts to another conformation. Thus, the interaction specificity of the groove-binding ligands is influenced not only by the minor groove substituents, but the peculiarities of the secondary structure of polynucleotides.     

Probing the hydration of the minor groove of A.T synthetic DNA polymers by volume and heat changes

The minor-groove ligand netropsin provides a sensitive probe of the hydration difference between poly(dA).poly(dT) and poly[d(AT)].poly[d(AT)]. We have measured the volume change delta V accompanying binding of netropsin to these polymers, using an improved magnetic suspension densimeter. For poly(dA).poly(dT) we find delta V = +97 mL/mol of bound netropsin at pH 7.0 and 10 mM sodium phosphate buffer. For poly[d(AT)].poly[d(AT)] we find delta V = -16 mL/mol of bound netropsin. This striking differential effect suggests that the poly(dA).poly(dT) duplex compresses more water (or is more extensively hydrated). From our enthalpy and entropy results we estimate the approximately 10 water molecules, immobilized in the minor groove of this system, are displaced by each netropsin bound. The volume increase, however, is substantially larger than can be explained by a simple melting of these immobilized water molecules in the minor groove. A decompression of at least 40 water molecules must attend the complexation to the poly(dA).poly(dT) duplex. This suggests that the conformation change attending the binding of the drug to this polymer duplex causes a further dehydration, whereas no such change in dehydration and configuration for the heteropolymer system is indicated.     

Berberine-DNA complexation: new insights into the cooperative binding and energetic aspects

The equilibrium binding of the cytotoxic plant alkaloid berberine to various DNAs and energetics of the interaction have been studied. At low ratios of bound alkaloid to base pair, the binding exhibited cooperativity to natural DNAs having almost equal proportions of AT and GC sequences. In contrast, the binding was non-cooperative to DNAs with predominantly high AT or GC sequences. Among the synthetic DNAs, cooperative binding was observed with poly(dA).poly(dT) and poly(dG).poly(dC) while non-cooperative binding was seen with poly(dA-dT).poly(dA-dT) and poly(dG-dC).poly(dG-dC). Both cooperative and non-cooperative bindings were remarkably dependent on the salt concentration of the media. Linear plots of ln K(a) versus [Na(+)] for poly(dA).poly(dT) and poly(dA-dT).poly(dA-dT) showed the release of 0.56 and 0.75 sodium ions respectively per bound alkaloid. Isothermal titration calorimetry results revealed the binding to be exothermic and favoured by both enthalpy and entropy changes in all DNAs except the two AT polymers and AT rich DNA, where the same was predominantly entropy driven. Heat capacity values (DeltaCp(o)) of berberine binding to poly(dA).poly(dT), poly(dA-dT).poly(dA-dT), Clostridium perfringens and calf thymus DNA were -98, -140, -120 and -110 cal/mol K respectively. This study presents new insights into the binding dependent base pair heterogeneity in DNA conformation and the first complete thermodynamic profile of berberine binding to DNAs.     

The helix-coil transitions of poly (dA)-poly (dT) and poly (dA-dT)-poly (dA-dT)

Helix–coil transition curves are calculated for poly (dA) poly(dT) and poly (dA-dT) poly (dA-dT) using the integral equation approach of Goel and Montroll.⁵ The transitions are described by the loop entropy model with the exponent of the loop entropy factor, k, remaining an arbitrary constant. The theoretical calculations are compared with experimental transition curves of the two polymers. Results indicate that the stacking energies for these two polymers differ by about 1 kcal/mole of base pairs. Also, a fit between theory and experiment was not possible for k > 1.70.     

Sequence and length dependent thermodynamic differences in heterocyclic diamidine interactions at AT base pairs in the DNA minor groove

With the goal of developing a better understanding of the antiparasitic biological action of DB75, we have evaluated its interaction with duplex alternating and nonalternating sequence AT polymers and oligomers. These DNAs provide an important pair of sequences in a detailed thermodynamic analysis of variations in interaction of DB75 with AT sites. The results for DB75 binding to the alternating and nonalternating AT sequences are quite different at the fundamental thermodynamic level. Although the Gibbs energies are similar, the enthalpies for DB75 binding with poly(dA).poly(dT) and poly(dA-dT).poly(dA-dT) are +3.1 and -4.5 kcal/mol, respectively, while the binding entropies are 41.7 and 15.2 cal/mol.K, respectively. The underlying thermodynamics of binding to AT sites in the minor groove plays a key role in the recognition process. It was also observed that DB75 binding with poly(dA).poly(dT) can induce T.A.T triplet formation and the compound binds strongly to the dT.dA.dT triplex.