Carbon Recycling for Renewable Materials and Energy Supply

The current flow of carbon for the production, use, and waste management of polymer‐based products is still mostly linear from the lithosphere to the atmosphere with rather low rates of material recycling. In view of a limited future supply of biomass, this article outlines the options to further develop carbon recycling (C‐REC). The focus is on carbon dioxide (CO₂) capture and use for synthesis of platform chemicals to produce polymers. CO₂ may be captured from exhaust gases after combustion or fermentation of waste in order to establish a C‐REC system within the technosphere. As a long‐term option, an external C‐REC system can be developed by capturing atmospheric CO₂. A central role may be expected from renewable methane (or synthetic natural gas), which is increasingly being used for storage and transport of energy, but may also be used for renewable carbon supply for chemistry. The energy input for the C‐REC processes can come from wind and solar systems, in particular, power for the production of hydrogen, which is combined with CO₂ to produce various hydrocarbons. Most of the technological components for the system already exist, and, first modules for renewable fuel and polymer production systems are underway in Germany. This article outlines how the system may further develop over the medium to long term, from a piggy‐back add‐on flow system toward a self‐carrying recycling system, which has the potential to provide the material and energy backbone of future societies. A critical bottleneck seems to be the capacity and costs of renewable energy supply, rather than the costs of carbon capture.     

京津冀城市群能源协同发展背景下能源生产结构变化探究

能源作为城市生产与生活中不可替代的资源类型,在城市化发展过程具有至关重要的作用。工业革命时代的结束,信息时代的开始,标志着以化石燃料为主要原料的发展方式发生转变,能源生产结构随着化石燃料比重下降而优化。城市群成为当前城市化的主体形态,其发展战略对区域能源结构具有重要影响。以京津冀城市群为例,从地级市尺度核算了2001—2015年不同城市能源生产结构的特征及其变化,并分析了城市群能源协同发展战略对不同城市能源生产结构的影响。主要结论包括:(1)2001—2015年京津冀各城市能源生产结构整体上趋于优化,但能源生产化石燃料占主导地位的本质特点没有改变。例如,河北的邯郸和邢台市增加了一次电力生产,但原煤生产仍占比90%以上。(2)研究根据能源生产的主导类型,可将京津冀城市划分为两类,即原煤主导型与原油主导型城市。其中,原煤主导型城市能源生产结构的调整明显优于原油主导型城市,例如,北京、石家庄、张家口与承德等原煤主导型城市的煤炭生产比重显著下降,而天津与沧州市等原油主导型城市的原油生产无明显下降趋势。(3)京津冀能源协同发展战略的实施有助于推进能源生产结构的优化,但对不同城市的影响不同,其中,对北京和河北承德市能源生产结构优化最显著,2001—2015年原煤生产比例下降了近40%,与协同发展战略的"基本无煤矿"目标方向一致,而对邯郸市、邢台市影响不明显。京津冀城市群能源生产结构调整仍具有较大潜力,对于原煤生产比例最高的城市(邯郸和邢台市),需要加快城市的能源生产转型,增加清洁能源产出,改善能源生产单一的结构特点;对于原煤生产产量较高的城市(唐山市),需要根据资源禀赋情况逐步调整原煤产量,进一步集约地区煤矿,同时鼓励发展煤炭洗选业,提高煤炭清洁生产技术;对于具有"无煤矿化"目标的高煤产城市(承德市和张家口市),需加快淘汰落后产能,同时依托京津冀能源协同发展战略,充分利用自身自然风力优势和区位优势,大力发展新能源。     

翻堆频率对堆肥减量化、腐殖化和稳定化的影响

好氧堆肥是有机固体废弃物处理处置的有效手段之一,堆肥还田也是贫瘠土壤改良的常用措施。但好氧堆肥是一个典型的CO_2等温室气体的释放过程。如何减少堆肥过程中的CO_2释放,强化堆肥的腐殖化过程对于实现有机固体废弃物的低碳化堆肥、提高作为优良土壤改良剂的腐殖质产量具有重要意义。本文选取农林秸秆和餐厨垃圾作为堆肥原料,研究不同翻堆频率对堆肥过程中的物料减量化、腐殖化和稳定化的影响,以期发现一个较低碳的堆肥工艺,并从微生物角度初步探索了其影响机制。研究结果显示,不同的翻堆频率(分别为每2 d、4 d和6 d翻堆一次),堆料的减量化和腐殖化程度有一定差异,翻堆频率为4 d的堆肥工艺物料减量率最高为50.5%,但碳减量率最低为77.4%;而翻堆频率为2 d的堆肥工艺腐殖质产量最高;3种堆肥工艺经62 d堆肥都达到了腐熟程度,翻堆频率为4 d的堆肥工艺腐熟化程度最高。不同的翻堆频率可能通过影响堆肥过程中堆料的温度、含氧量等因素从而改变堆料中活性微生物量、种类和生物酶活性,进而影响堆料的矿化和腐殖化进程。     

Charge Storage Capacity of Renewable Biopolymer/Conjugated Polymer Interpenetrating Networks Enhanced by Electroactive Dopants

Renewable materials are requested for large scale electrical storage, a coming necessity with the growth of intermittent solar and wind renewable electricity generation. Biopolymers are a source of inexpensive materials, in particular through the use of black liquor from paper production, a waste product. Interpenetrating networks of the biopolymer lignosulfonate (Lig) and conjugated polymer polypyrrole (Ppy) are synthesized by galvanostatic polymerization from pyrrole/lignosulfonate mixture in acidic aqueous electrolyte. Methoxy and phenolic functional group present in the non‐conducting lignosulfonate are converted to quinone groups. The redox chemistry of quinones is used for charge storage, along with charge storage in polypyrrole. A large variation of the electrochemical activity between lignosulfonates obtained from different sources is observed. The charge storage capacities are significantly enhanced by also including another electroactive dopant, anthraquinone sulfonate (AQS). AQS redox peaks act as an internal reference (standard) to probe the redox electrochemistry of Lig. The synthesized Ppy(Lig) and Ppy(Lig‐AQS) electrodes are characterized by cyclic voltammetry, galvanostatic charge‐discharge cycling, electrochemical quartz crystal microbalance, and atomic force microscopy.     

Second Generation Biofuels: High-Efficiency Microalgae for Biodiesel Production

The use of fossil fuels is now widely accepted as unsustainable due to depleting resources and the accumulation of greenhouse gases in the environment that have already exceeded the “dangerously high” threshold of 450 ppm CO₂-e. To achieve environmental and economic sustainability, fuel production processes are required that are not only renewable, but also capable of sequestering atmospheric CO₂. Currently, nearly all renewable energy sources (e.g. hydroelectric, solar, wind, tidal, geothermal) target the electricity market, while fuels make up a much larger share of the global energy demand (～66%). Biofuels are therefore rapidly being developed. Second generation microalgal systems have the advantage that they can produce a wide range of feedstocks for the production of biodiesel, bioethanol, biomethane and biohydrogen. Biodiesel is currently produced from oil synthesized by conventional fuel crops that harvest the sun’s energy and store it as chemical energy. This presents a route for renewable and carbon-neutral fuel production. However, current supplies from oil crops and animal fats account for only approximately 0.3% of the current demand for transport fuels. Increasing biofuel production on arable land could have severe consequences for global food supply. In contrast, producing biodiesel from algae is widely regarded as one of the most efficient ways of generating biofuels and also appears to represent the only current renewable source of oil that could meet the global demand for transport fuels. The main advantages of second generation microalgal systems are that they: (1) Have a higher photon conversion efficiency (as evidenced by increased biomass yields per hectare): (2) Can be harvested batch-wise nearly all-year-round, providing a reliable and continuous supply of oil: (3) Can utilize salt and waste water streams, thereby greatly reducing freshwater use: (4) Can couple CO₂-neutral fuel production with CO₂ sequestration: (5) Produce non-toxic and highly biodegradable biofuels. Current limitations exist mainly in the harvesting process and in the supply of CO₂ for high efficiency production. This review provides a brief overview of second generation biodiesel production systems using microalgae.     

Life cycle inventory study of the electrical energy production in Romania

Aim, Scope and Background The paper proposes the assessment of the environmental interventions resulting from the electrical energy production in Romania, a Central East European country, using the LCA technique limited to a Life Cycle Inventory study (an LCA without the Life Cycle Impact Assessment phase). Main Features The following life cycles of the energy carriers employed in the production of the electrical energy are analysed according to their provenance: lignite (domestic) 31.2%, brown coal (domestic) 3.4%, brown coal (import) 0.4%, heavy oil (domestic, land) 4.2%, heavy oil (domestic, continental platform of the Black Sea) 0.4%, heavy oil (import) 3.6%, natural gas (domestic) 12.4%, natural gas (import) 6.1%, hydropower 27.8%, and nuclear energy 10.5% from the total of the electrical energy produced in Romania. The unit processes of the life cycles of these energy carriers are aggregated in two main stages: Pre-combustion (extraction, processing, transport and achievement of infrastructure) and Combustion (the production of electricity). The functional unit of the study is represented by 1 kwh. The spatial limits of the analysed system are extended as far as CIS countries for coal, Western Siberia (Russian Federation) for natural gas and the OPEC countries for oil. The temporal limits are included in the year 2000. Results and Discussion The LCI study enabled us to quantify the interventions on the environment, which result from the electricity production in Romania, the independent use of different energy carriers and the different life cycle stages of the system. The use of the LCA technique in a prospective way shows the reduction of these interventions that could be achieved through the adoption of specific scenarios for the development of electrical energy production in the country. Conclusions The main findings of this Life Cycle Inventory study, the first for Romania, are: the emissions of pollutant substances are prevailing in the combustion stage; for different energy carriers, the magnitude of environmental interventions decrease in the following order: coal, oil, natural gas, hydropower and nuclear energy. By comparison with other countries, the environment is more affected by the production of electricity in the case of Romania and only the promotion of alternative, renewable resources such as hydropower could substantially improve these interventions. Recommendations and Perspectives Some important interactions with the environment, like land use or the risks of the nuclear energy, are not taken into consideration in the study because of the lack of particular data for Romania. We would like to continue the investigation in order to surpass the limits of the study, on the one hand by collecting data concerning the risk of nuclear power or land use at the national level for different energy carriers or, on the other hand, by taking into account some other renewable resources like wind or solar energy.     

Photosynthetic biomass and H2 production by green algae: from bioengineering to bioreactor scale-up

The development of clean borderless fuels is of vital importance to human and environmental health and global prosperity. Currently, fuels make up approximately 67% of the global energy market (total market = 15 TW year⁻¹) ( Hoffert et al. 1998 ). In contrast, global electricity demand accounts for only 33% ( Hoffert et al. 1998 ). Yet, despite the importance of fuels, almost all CO₂ free energy production systems under development are designed to drive electricity generation (e.g. clean-coal technology, nuclear, photovoltaic, wind, geothermal, wave and hydroelectric). In contrast, and indeed almost uniquely, biofuels also target the much larger fuel market and so in the future will play an increasingly important role in maintaining energy security ( Lal 2005 ). Currently, the main biofuels that are at varying stages of development include bio-ethanol, liquid carbohydrates [e.g. biodiesel or biomass to liquid (BTL) products], biomethane and bio-H₂. This review is focused on placing bio-H₂ production processes into the context of the current biofuels market and summarizing advances made both at the level of bioengineering and bioreactor design.     

Weedy lignocellulosic feedstock and microbial metabolic engineering: advancing the generation of ‘Biofuel’

Lignocellulosic materials are the most abundant renewable organic resources (~200 billion tons annually) on earth that are readily available for conversion to ethanol and other value-added products, but they have not yet been tapped for the commercial production of fuel ethanol. The lignocellulosic substrates include woody substrates such as hardwood (birch and aspen, etc.) and softwood (spruce and pine, etc.), agro residues (wheat straw, sugarcane bagasse, corn stover, etc.), dedicated energy crops (switch grass, and Miscanthus etc.), weedy materials (Eicchornia crassipes, Lantana camara etc.), and municipal solid waste (food and kitchen waste, etc.). Despite the success achieved in the laboratory, there are limitations to success with lignocellulosic substrates on a commercial scale. The future of lignocellulosics is expected to lie in improvements of plant biomass, metabolic engineering of ethanol, and cellulolytic enzyme-producing microorganisms, fullest exploitation of weed materials, and process integration of the individual steps involved in bioethanol production. Issues related to the chemical composition of various weedy raw substrates for bioethanol formation, including chemical composition-based structural hydrolysis of the substrate, need special attention. This area could be opened up further by exploring genetically modified metabolic engineering routes in weedy materials and in biocatalysts that would make the production of bioethanol more efficient.     

煤矿固废资源化利用的生态效率与碳减排——以淮北市为例

工业固废的大量堆积产生多种环境危害,工业固废的资源化利用能够节约资源和缓解环境压力。建筑行业是能源消耗和碳排放的主要部门之一,其中建筑材料生产阶段的能耗和碳排放占有重要的地位。粉煤灰、煤矸石是常见的工业固体废物,尤其是在以煤炭为主要能源的地区。粉煤灰、煤矸石资源化利用的途径之一是用于制造新型墙体砖。本文以煤炭资源型城市淮北市的新型墙体砖(粉煤灰砌块、煤矸石砖)和传统墙体砖(粘土砖、粘土多孔砖)为案例,对墙体砖生产过程的生态效率和碳排放进行分析和比较。在淮北市墙体材料行业碳排放不增加的前提下,以最优生态效率为目标,建立线性规划模型,对淮北市4种主要墙体材料的产量进行规划。分析结果表明:新型墙体材料的生态效率高于传统墙体材料;煤矸石砖生产过程的碳排放系数高于传统墙体砖;粉煤灰砌块生产过程的碳排放系数介于粘土砖和粘土多孔砖之间。在淮北市墙体材料行业碳排放不增加的前提下,与现有的产量相比,淮北市应禁止粘土砖的生产,适当减少粘土多孔砖的产量,适当增加粉煤灰砌块和煤矸石砖的产量,以达到最优生态效率。在最优生态效率的情况下,淮北市新型墙体材料煤矸石砖对煤矸石工业固废的利用率将由目前的15.8%增加到25.2%。     

Lifecycle climate impact and primary energy use of electric and biofuel cargo trucks

Heavy trucks contribute significantly to climate change, and in 2020 were responsible for 7% of total Swedish GHG emissions and 5% of total global CO₂ emissions. Here we study the full lifecycle of cargo trucks powered by different energy pathways, comparing their biomass feedstock use, primary energy use, net biogenic and fossil CO₂ emission and cumulative radiative forcing. We analyse battery electric trucks with bioelectricity from stand-alone or combined heat and power (CHP) plants, and pathways where bioelectricity is integrated with wind and solar electricity. We analyse trucks operated on fossil diesel fuel and on dimethyl ether (DME). All energy pathways are analysed with and without carbon capture and storage (CCS). Bioelectricity and DME are produced from forest harvest residues. Forest biomass is a limited resource, so in a scenario analysis we allocate a fixed amount of biomass to power Swedish truck transport. Battery lifespan and chemistry, the technology level of energy supply, and the biomass source and transport distance are all varied to understand how sensitive the results are to these parameters. We find that pathways using electricity to power battery electric trucks have much lower climate impacts and primary energy use, compared to diesel- and DME-based pathways. The pathways using bioelectricity with CCS result in negative emissions leading to global cooling of the earth. The pathways using diesel and DME have significant and very similar climate impact, even with CCS. The robust results show that truck electrification and increased renewable electricity production is a much better strategy to reduce the climate impact of cargo transport than the adoption of DME trucks, and much more primary energy efficient. This climate impact analysis includes all fossil and net biogenic CO₂ emissions as well as the timing of these emissions. Considering only fossil emissions is incomplete and could be misleading.     

Light-driven chemical synthesis

Depletion of the fossil fuel reserves of the Earth has prompted research into sources of renewable and sustainable energy, and feedstock for the chemical and pharmaceutical industries to support the transition towards a bio-based society. Photosynthesis efficiently captures solar energy, but its subsequent conversion into chemical energy in the form of biomass is limited to a final output in the 1-4% range. Re-routing of photosynthetic electron transport and reducing power directly into desired biosynthetic pathways offers a new avenue for sustainable production of high-value products.     

Western European Materials as Sources and Sinks of CO2

Materials use is an important factor influencing carbon dioxide (CO₂) emissions because significant amounts of carbon dioxide are released during the production of materials from natural resources, and because products and wastes can function as important sinks for CO₂. This article analyzes the impact of Western European materials use on CO₂ emissions. The material flows for steel, cement, petrochemicals, and wood products are analyzed in more detail. The analysis shows that particular characteristics of the materials system must be considered in the development of emission reduction strategies. It is important to select a relatively closed system for policymaking, as in Western Europe, in order to prevent unwanted transboundary effects. The materials stored in the form of products, and the net exports of materials, products, and waste limit the potential of a recycling strategy. Carbon storage in products and waste disposal sites is significant both for synthetic and natural organic materials, but is not accounted for in natural organic materials in current emissions statistics. Accordingly the emissions accounting practices should be modified to reflect the storage of such materials.     

蓝细菌固碳合成乳酸技术的发展与展望

乳酸是一种重要的工业化学品,被广泛应用于各个行业。近年来,随着聚乳酸(PLA)市场的兴起,乳酸原料的需求也在不断增加。糖基异养生产乳酸所带来的高昂成本与市场需求的矛盾吸引着研究人员积极寻找其他有利的解决方案。蓝细菌光合固碳生产乳酸是一种潜力巨大的新型原料供应策略,基于光合自养的细胞工厂,可以在单一平台上以太阳能为驱动力,从二氧化碳中直接生产出高光学纯度的乳酸。该方法原料廉价易得、过程简单可控、产物明确且易分离,同时达到节能减排和高附加值产品生产的双重效果,具有重要的研究与应用价值。文中回顾了蓝细菌固碳产乳酸技术的发展历程,从代谢基础、代谢工程策略、代谢动力学分析与技术应用等方面,梳理其研究进展和所遇到的技术难点,并对该技术的未来进行展望。     

青海海北地区矮嵩草草甸生物量和能量的分配

 此项研究工作于1980年在海北高寒草甸生态系统定位站进行。本文研究了青藏高原地区分布面积广、草质优良,在畜牧业生产中有重要意义的矮嵩草草甸的生物量和它的能量分配关系,测定了地上,地下生物量和不同物候期主要植物类群的热值含量。研究结果表明：矮嵩草草甸生物量的季节动态较为明显,地上生物量随生长季节的水热条件和植物的生长发育阶段而变化,9月初地上生物量达到峰值(296.66g／m2),此后生物量逐渐减少,到枯黄前而停止;地下根系生物量在返青期较高,生长旺盛期最低,枯黄期最高,这同植物生长发育阶段的物质运转有关。矮嵩草草甸主要植物类群的热值以生长旺盛期最高,枯黄期次之,返青期较低;各类草的热值,以莎草类最高,禾草类次之,杂类草最低。矮嵩草草甸总初级生产量为909.49g／m2·年,其中地上为296.66g／m2·年,地下为596.67g／m2·年,枯枝落叶为16.16g／m2·年。群落在不同生长期所固定的太阳能数值不一,以枯黄前所固定的太阳能为最多,生长期整个群落的光能利用率为0.295%。     

Ultrasonically assisted liquefaction of lignocellulosic materials

In our research, we have utilized high energy ultrasound for the liquefaction of different lignocellulosic materials, wood wastes in particular. We developed a highly efficient way of transforming this biomass waste into valuable chemicals. It was found, that the reaction yield in all experiments was high and that the reaction times were shortened up to nine times when using the ultrasound process with smaller residual particles and with no influence on the hydroxyl number of the final products. The use of the ultrasound process inhibits the formation of the large molecular structures during the liquefaction from the degradation products, by keeping the reactive segments apart and due to such a short reaction time being used. The short reaction time and subsequent low energy consumption for the liquefaction reaction leads to the creation of the new method for the transformation of the wood waste materials into valuable chemicals.     

Energetics of stockfeed production

In a study of energy use in the stockfeed industry of Victoria, Australia, the use of support energy was measured in the production of raw materials, stockfeed manufacture, and transport of materials and stockfeeds to and from the mills. In the production of rations for broiler and layer poultry, pigs and dairy cows, the largest quantities of support energy were used in the production of raw materials (59–78% of the total). Stockfeed manufacture comprised 12–24% of total energy use, and transport, both to and from mills, accounted for 10–17% of the total. Support energy inputs ranged from 3000 MJ/t for a dairy ration to 6000 MJ/t for a broiler chicken ration. The latter contained about 12% of animal byproducts, for which the energy cost of production was over 10 000 MJ/t, whereas raw materials of plant origin involved energy costs of production of less than 4000 MJ/t. Nearly two-thirds of the energy cost of stockfeed manufacture was incurred in the pelleting operation, and the heavy dependence on road, rather than rail, transport resulted in high transport energy costs. The metabolisable energy available to the animal from the compounded rations was two to three times greater than the support energy required to produce them.     

Life cycle inventories for the production of sodium silicates

Soluble alkali silicate glasses, liquids and powders are an important class of primary synthetic chemicals and are produced in large quantities both in Europe and world-wide. They are utilised in a broad range of application fields, both industrial and domestic, including detergents, chemical feedstocks, paper manufacture, civil engineering and adhesives. In order to establish viable figures for the consumption of raw materials, water and energy and the emissions to air and water and solid waste generation, the production routes for five typical commercial sodium silicate products were traced back to the extraction of the relevant raw materials from the earth. Life Cycle Inventories for these products were compiled by EMPA St. Gallen / Switzerland on behalf of CEES, a Sector Group of CEFIC, using the data input based on the production of 1995 from 12 West European silicate producers covering about 93% of the total alkaline silicate production in Western Europe.     

利用废弃物原料生产燃料乙醇的研究进展

乙醇是一种十分重要的工业用途的化工原料。目前国内外学者纷纷采用不同的方法和手段对乙醇发酵进行研究,目前,利用废弃物为原料生产乙醇是热点。本文阐述了利用各种废弃原料生产乙醇的必要性,并分别论述了利用纤维质废弃物、淀粉质废弃物、糖质废弃物等生产乙醇的研究进展,着重论述了利用纤维质废弃物的生产情况,提出了需进一步研究和解决的问题。     

The Economics of Biomass Collection and Transportation and Its Supply to Indiana Cellulosic and Electric Utility Facilities

With cellulosic energy production from biomass becoming popular in renewable energy research, agricultural producers may be called upon to plant and collect corn stover or harvest switchgrass to supply feedstocks to nearby facilities. Determining the production and transportation cost to the producer of corn stover or switchgrass and the amount available within a given distance from the plant will result in a per metric ton cost the plant will need to pay producers in order to receive sufficient quantities of biomass. This research computes up-to-date biomass production costs using recent prices for all important cost components including seed, fertilizer, herbicide, mowing/shredding, raking, baling, storage, handling, and transportation. The cost estimates also include nutrient replacement for corn stover. The total per metric ton cost is a combination of these cost components depending on whether equipment is owned or custom hired, what baling options are used, the size of the farm, and the transport distance. Total costs per dry metric ton for biomass with a transportation distance of 60 km ranges between $63 and $75 for corn stover and $80 and $96 for switchgrass. Using the county quantity data and this cost information, we then estimate biomass supply curves for three Indiana coal-fired electric utilities. This supply framework can be applied to plants of any size, location, and type, such as future cellulosic ethanol plants. Finally, greenhouse gas emissions reductions are estimated from using biomass instead of coal for part of the utility energy and also the carbon tax required to make the biomass and coal costs equivalent. Depending on the assumed CO₂ price, the use of biomass instead of coal is found to decrease overall costs in most cases.     

Microalgae potential as a biogas source: current status,restraints and future trends

In recent years, the world energy demands have had a recurrent increase. For this reason the alternative to the fossil fuel resources are trend topics in investigation. Microalgae have been extensively studied as a source of biofuels and as one of the most promising alternatives in this new framework. One of the possibilities of obtaining renewable energy from microalgae is biogas production using anaerobic digestion process. This process is considered a significant component for biofuels and waste management, since represent an opportunity for energy generation using different wastewater products; also, the economic viability of microalgae liquid biofuel production could be improved. However, the anaerobic digestion of microalgae biomass is still not optimized because of the numerous technical limitations such as the microalgae characteristics, low carbon:nitrogen ratio, ammonia toxicity and even salinity. The present review summarizes and compares information concerning to anaerobic digestion of microalgal biomass and future directions for research. Besides, specific operational factors and potential inhibitory parameters of the process are analyzed and compared. Additionally, the paper covers the state or art concerning in methane production enhancement from algal biomass.