Bat genitalia: allometry, variation and good genes

Male genitalia are typically highly variable across species, for which sexual selection is thought to be responsible. Sexually selected traits characteristically show positive allometry and high phenotypic variation, although genitalia seem to be typified by negative allometry due to stabilizing selection. Additionally, while sexual selection appears to be the primary force responsible for genital evolution, the precise mechanism is unclear, but good-genes selection could be involved. If so, male genital variation should correlate with some male quality measure(s). We investigated the allometry of male Nyctalus noctula genitalia and investigated associations between genital size and three phenotypic measures of male quality (body size, relative body mass, and fluctuating asymmetry (FA)). We found that the penis exhibited positive allometry and high phenotypic variation, and was positively associated with male body size and relative body mass, but not with FA. This pattern is more typical of sexually selected display traits, contrasting with general patterns of genital allometry. The baculum was negatively allometric and was not associated with any quality measure. Our results suggest that the N. noctula penis is under directional sexual selection and is a reliable indicator of male phenotypic quality.  © 2004 The Linnean Society of London, Biological Journal of the Linnean Society , 2004, 83 , 497–507.     

Allometry of a sexual trait in relation to diet experience and alternative mating tactics in two rubyspot damselflies (Calopterygidae: Hetaerina)

Several arguments have been put forward to explain how sexual selection drives the evolution of sexual trait allometry, especially hyperallometry. The ‘positive allometry theory’ suggests that hyperallometry is a rule in all‐secondary sexual traits, whereas the ‘display hypothesis’ suggests that only males in good condition will exhibit hyperallometric sexual display traits. In the present study, we investigated: (1) the condition‐dependence nature (by using two diet treatments that varied in the amount of food provided to the larvae) of a sexually selected trait (wing pigmentation; WP) in recently‐emerged adults of the American rubyspot damselfly, Hetaerina americana, and (2) the scaling relationship between WP and body size (wing and body length) in the rubyspot damselflies H. americana and Hetaerina vulnerata, according to alternative reproductive tactics (ARTs; territorial and nonterritorial males). First, we found support that indicated that diet positively affected WP length, although there was no significant WP allometric pattern in relation to diet regimes. Second, WP was hyperallometric in both Hetaerina species. WP size was similar between ARTs and, in H. americana (but not H. vulnerata), nonterritorial males showed steeper slopes than territorial males when wing length was used. The results obtained support the notion that sexual traits are hyperallometric, although there is no clear pattern in relation to ARTs. © 2013 The Linnean Society of London     

The static allometry of sexual and nonsexual traits in vervet monkeys

Sexual traits vary tremendously in static allometry. This variation may be explained in part by body size‐related differences in the strength of selection. We tested this hypothesis in two populations of vervet monkeys, using estimates of the level of condition dependence for different morphological traits as a proxy for body size‐related variation in the strength of selection. In support of the hypothesis, we found that the steepness of allometric slopes increased with the level of condition dependence. One trait of particular interest, the penis, had shallow allometric slopes and low levels of condition dependence, in agreement with one of the most consistent patterns yet detected in the study of allometry, namely that of genitalia exhibiting shallow allometries. © 2014 The Linnean Society of London, Biological Journal of the Linnean Society, 2015, 114 , 527–537.     

Allometry and sexually dimorphic traits in male anurans

Allometry of secondary sexual traits has been the subject of recent debate, and the generality of positive allometry and its association with sexual selection have been recently questioned. Whereas some studies suggest an almost universal positive allometry for traits under sexual selection and isometry or a negative allometry for traits not under such pressure, other studies argue that this pattern results from the study of exaggerated (ornamental) traits. To answer the call for an examination of the allometry of less-exaggerated sexually selected traits, we have examined morphological data from 14 sexually dimorphic traits and six monomorphic traits from three anuran species. Although we found evidence of positive allometry in male secondary sexual traits of several species and populations, not all nonsexual traits were isometric or exhibited negative allometry. Furthermore, our results indicate that larger traits in the populations that we studied were not associated with greater allometric slopes. Therefore, our study is in line with the contention suggesting no specific kind of allometric pattern for sexual and nonsexual characters, and we can only advocate for further investigation of trait allometry and sexual selection to understand the complexity underlying the evolution of allometry in sexual traits.     

Phenotypic and genetic variation in male genitalia in the seedbug, Lygaeus equestris (Heteroptera)

Male genitalia evolve through sexual selection and, in insects, tend to show negative static allometry, low phenotypic variation, and are usually relatively small. Much less is known about the genetic variation and heritability of male genitalia. Additionally, in instances where the intromittent organ is greatly elongated, it is unclear whether typical patterns of genital scaling and variation also apply. In the present study, we investigated the allometry, variation, and heritability of male genital length in the seedbug, Lygaeus equestris , a species with a greatly elongated intromittent organ (i.e. almost as long as male body size). We found that genital length was negatively allometric, in spite of its great length, and was no more variable than nongenital traits. Additionally, genital length was significantly heritable and had considerable evolvability.  © 2009 The Linnean Society of London, Biological Journal of the Linnean Society , 2009, 98 , 400–405.     

Genotype × environment interaction in the allometry of body,genitalia and signal traits in Enchenopa treehoppers (Hemiptera: Membracidae)

Developmental plasticity may promote divergence by exposing genetic variation to selection in novel ways in new environments. We tested for this effect in the static allometry (i.e. scaling on body size) of traits in advertisement signals, body and genitalia. We used a member of the Enchenopa binotata species complex of treehoppers – a clade of plant‐feeding insects in which speciation is associated with colonization of novel environments involving marked divergence in signals, subtle divergence in body size and shape, and no apparent divergence in genitalia. We found no change in mean allometric slopes across environments, but substantial genetic variation and genotype × environment interaction (G × E) in allometry. The allometry of signal traits showed the most genetic variation and G × E, and that of genitalia showed the weakest G × E. Our findings suggest that colonizing novel environments may have stronger diversifying consequences for signal allometry than for genitalia allometry. © 2011 The Linnean Society of London, Biological Journal of the Linnean Society, 2012, 105 , 187–196.     

A Test of Genital Allometry Using Two Damselfly Species does not Produce Hypoallometric Patterns

It is widely admitted that sexual selection is the responsible force behind genital traits. However, the particular mechanisms of genital evolution are still debated. Recently, studies of genital static allometry in insects have been used to elucidate such mechanisms. Insect genital traits are often reported to show negative allometry (i.e., a slope < 1), which has generated a number of ideas on how genital traits are selected. However, many studies that have inferred selection mechanisms have omitted consideration of the function of genital traits, used unreliable indicators of body size, and only rarely included female genitalia in their analysis. We investigated whether negative allometry operates for genitalia in two damselfly species (Protoneura cara and Ischnura denticollis). Damselflies are suitable for genital allometry tests as their genital function and body size indicators (wing length and head width) are relatively well known and established. First, we show that the aedeagus is used to physically remove sperm from both sperm storage organs (bursa and spermatheca) and that wing length and head width correlate positively with other morphological traits for the two study species. Second, we estimated genital allometry by measuring aedeagal length, vaginal length, bursal volume, and spermathecal volume. Our results indicate no consistent allometric pattern. Allometry for aedeagal length and vaginal width was not the same. Thus, there was no support for a negative allometric relationship. We urge researchers investigating allometry to look directly at how genitalia function rather than inferring function from allometric relationships only.     

The allometric pattern of sexually size dimorphic feather ornaments and factors affecting allometry

The static allometry of secondary sexual characters is currently subject to debate. While some studies suggest an almost universal positive allometry for such traits, but isometry or negative allometry for nonornamental traits, other studies maintain that any kind of allometric pattern is possible. Therefore, we investigated the allometry of sexually size dimorphic feather ornaments in 67 species of birds. We also studied the allometry of female feathers homologous to male ornaments (female ornaments in the following) and ordinary nonsexual traits. Allometries were estimated as reduced major axis slopes of trait length on tarsus length. Ornamental feathers showed positive allometric slopes in both sexes, although that was not a peculiarity for ornamental feathers, because nonsexual tail feathers also showed positive allometry. Migration distance (in males) and relative size of the tail ornament (in females) tended to be negatively related to the allometric slope of tail feather ornaments, although these results were not conclusive. Finally, we found an association between mating system and allometry of tail feather ornaments, with species with more intense sexual selection showing a smaller degree of allometry of tail ornaments. This study is consistent with theoretical models that predict no specific kind of allometric pattern for sexual and nonsexual characters.     

Hybridization, developmental stability, and functionality of morphological traits in the ground beetle Carabus solieri (Coleoptera, Carabidae)

The assessment of developmental stability in hybrids can provide valuable information in the study of species formation because it allows an evaluation of the degree of incompatibility of genetic systems that control developmental processes. The present study assessed the impact of two hybridization events, assumed to have occurred at different times, on developmental instability in the ground beetle Carabus solieri . Developmental instability was estimated in 678 individuals from 27 populations from the fluctuating asymmetry (FA) levels of four morphological traits: the tibia length of middle and hind legs, which are functional structures, and the length and the proximal width of the hind wings, which are vestigial and thus nonfunctional structures. Significant variations of FA levels between populations were shown only for the wing width. For this trait, FA levels in hybrids were higher than in their parental entities for both hybridization events, indicating a significant divergence of the gene systems controlling development between the parental entities in the two hybridization cases. As expected, wing traits exhibited FA levels at least three times higher than leg trait. Finally, the potential interest of vestigial traits in the particular context of hybridization is discussed.  © 2006 The Linnean Society of London, Biological Journal of the Linnean Society , 2006, 89 , 151–158.     

Fluctuating asymmetry of sexual and nonsexual traits in stalk‐eyed flies: a poor indicator of developmental stress and genetic quality

It has been proposed that females use fluctuating asymmetry (FA) in sexual ornaments to assess male quality. FA of sexual traits is predicted to show greater sensitivity to stress than FA of nonsexual traits, and to be heritable. We used a half‐sib mating design and manipulation of larval food environment to test these predictions on stalk‐eyed flies, Cyrtodiopsis dalmanni, in which females prefer males with larger eyespans. We measured size and FA of eyestalks and of two nonsexually selected characters, wing length and width. We found no evidence of an increase in FA under larval food stress in any of the individual traits, although trait size decreased under stress. We combined FA across traits into a single composite index, and found that males reared in the most benign larval environment had significantly higher composite FA than males reared on other media. There was no such effect in females. Heritability of FA was not significantly different from zero in any of the traits, in any of the environments, although trait sizes showed high heritability. We conclude that FA in sexual and nonsexual traits is a poor indicator of developmental stress and genetic quality.     

Is allometry of sexual traits adaptive? A field test with territorial damselflies

Recent studies have linked static allometry of sexual traits to selective advantages, in terms of sexual selection. An underlying, yet untested, assumption is that the allometry of sexual traits confers higher mating success and/or survival. Here, we investigated whether the allometry of two sexual traits is related to male mating success and survival in two species of damselflies: wing size in Paraphlebia zoe and the red‐pigmented wing spot in Hetaerina americana. We used large field‐based data sets of marked‐recaptured animals, in which we recorded male mating success and survival. Both sexual traits exhibited hyperallometric patterns; however, allometry was not linked to either mating success or survival. These results indicate that, at least during the period of sexual competition, allometry does not seem to be adaptive. Although our results may only apply to our damselfly study subjects (which nevertheless would require further tests in different seasons and/or study sites), our findings should encourage researchers to evaluate at least whether the assumed adaptiveness of sexual trait allometry holds for their study animals. © 2015 The Linnean Society of London, Biological Journal of the Linnean Society, 2015, 114 , 327–334.     

Sexual selection and the allometry of earwig forceps

Summary Positive intraspecific allometry, the tendency for large individuals to have relatively larger morphological traits, is thought to be more likely for secondary sexual traits than naturally selected traits. This is because secondary sexual traits are often used to signal individual quality and positive allometry should arise where the costs and/or benefits of signalling are size dependent. Here we examine the allometric relationships between forceps length, a sexually selected trait and elytra length, a naturally selected trait, in 42 species of earwig. Both forceps and elytra showed positive allometry. However, the degree of allometry was greater for forceps as predicted. If allometry arises due to sexual selection we would predict a greater degree of allometry in species with more exaggerated secondary sexual traits. Across species, the degree of forcep allometry did increase with forcep exaggeration. The relevance of positive allometry to reliable signalling is discussed.     

Variation in morphological traits and trait asymmetry in field Drosophila serrata from marginal populations

Drosophila serrata occurs along the eastern coast of Australia with a southern range boundary near Sydney. To compare levels of phenotypic variation in marginal and central populations, we examined morphological variation in populations of this species from the southern range boundary and two more northerly populations. The populations differed for wing traits and there was an increase in wing size in the marginal locations which persisted under laboratory culture. The means of wing and bristle traits increased under laboratory culture, whereas wing trait coefficients of variation and variances decreased. Heritability estimates for wing size traits tended to be lower in the field compared with the laboratory, whereas bristle and crossvein length heritabilities were similar across environments. There was evidence for heritable variation in wing and bristle traits in both the marginal and more northern populations, suggesting that genetic variation was not limiting in marginal populations. Fluctuating asymmetry (FA) was also assessed as a measure of genomic and environmental stress. There were no consistent differences among populations for the FA of individual traits, or for a total FA score summed across traits. FA levels in field parents and laboratory‐reared progeny were similar. Overall, the results do not support the conjecture that levels of phenotypic and genetic variability differ between central and marginal D. serrata populations.     

Geometric morphometrics and leaf phenotypic plasticity: assessing fluctuating asymmetry and allometry in European white oaks (Quercus)

Because plants are unable to move away from unfavourable habitats and environmental perturbations, leaf phenotypic plasticity facilitates light absorption and gas exchange. Oaks (Quercus spp.) are particularly known for their adaptability and plastic phenotypes, and leaf allometry and developmental instability may represent important mechanisms for their adaptation to environments and evolution. Because of its important role in the adaptation of plant populations to different environments, allometry can be involved in diversifying selection. Developmental instability is related to environmental perturbations and stresses by producing random deviations in structures characterized by bilateral symmetry, such as oak leaves. In addition, developmental instability can also arise from genetic bottlenecks or as a result of hybridization. The splitting of symmetric and asymmetric components of variation and their separate analysis allows the variability in leaf shape traits to be summarized, reducing the variation produced by developmental instability. The geometric morphometric approach is a useful method for the study of leaf asymmetry and allometric patterns. This method provides an important tool for the visualization of shape attributes that characterize species with highly variable leaf phenotypic patterns. In this study, leaf shape and size variability of three white oak species was investigated by means of a two‐dimensional landmark‐based method providing improved knowledge of variance partitioning, species discrimination, fluctuating asymmetry and allometric patterns of variation resulting from the different analyses. © 2015 The Linnean Society of London, Botanical Journal of the Linnean Society, 2015, 179 , 335–348.     

Geography of fluctuating asymmetry in the greenfinch, Carduelis chloris

Levels of fluctuating asymmetry (FA) in 12 bilateral skeletal traits were estimated from 12 populations of greenfinches (Carduelis chloris) collected along a north‐south gradient across Europe. Average FA of measured traits was positively correlated with latitude indicating that the younger and genetically less diverse northern European populations are developmentally less stable than the older and genetically more diverse southern populations. Levels of FA differed significantly between different traits being lowest for functionally important traits (limb and wing bones) and highest for functionally less important traits such as foramina (apertures through bones)– a pattern that was highly concordant across different populations. Males tended to exhibit higher levels of FA than females, a finding consistent with the suggestions that males are more prone to developmental perturbations than females. Age differences in levels of FA were relatively clear, but inconsistent across traits with different degree of functionality. Individual heterozygosity – as enumerated from variation in allozyme loci – was unrelated to individual FA. No evidence for existence of individual asymmetry parameter (IAP) was found although traits related to locomotion indicated some degree of integration, which was expressed by correlations in the signed asymmetry. Nevertheless, an individual's overall asymmetry was poorly predicted by asymmetry of individual characters. Evidence for existence of population asymmetry parameter (PAP) was clear since all traits exhibited a similar degree of association with latitude. That the latitudinal cline of increasing FA towards north coincided with decreasing levels of genetic variability across the cline could be indicative of break down of developmental stability in the recently established and genetically impoverished populations. To what extent a reduced heterozygosity, the break up of co‐adapted gene complexes and/or environmental differences contributed to this process cannot be distinguished from our data.     

Does allometry of a sexually selected ornamental trait vary with sexual selection intensity? A multi‐species test in damselflies

相似文献   

Pitfalls in understanding the functional significance of genital allometry

The male genitalia of arthropods consistently show negative static allometry (the genitalia of small males of a species are disproportionally large, and those of large males are disproportionally small). We discuss relations between the ‘one‐size‐fits‐all’ hypothesis to explain this allometry and the regimes of selection that may be acting on genitalia. We focus on the contrasts between directional vs. stabilizing selection, and natural vs. sexual selection. In addition, we point out some common methodological problems in studies of genital allometry. One‐size‐fits‐all types of arguments for negative allometry imply net stabilizing selection, but the effects of stabilizing selection on allometry will be weaker when the correlation between body size and the trait size is weaker. One‐size‐fits‐all arguments can involve natural as well as sexual selection, and negative allometry can also result from directional selection. Several practical problems make direct tests of whether directional or stabilizing selection is acting difficult. One common methodological problem in previous studies has been concentration on absolute rather than relative values of the allometric slopes of genitalia; there are many reasons to doubt the usefulness of comparing absolute slopes with the usual reference value of 1.00. Another problem has been the failure to recognize that size and shape are independent traits of genitalia; rapid divergence in the shape of genitalia is thus not paradoxical with respect to the reduced variation in their sizes that is commonly associated with negative allometric scaling.     

Sexual selection,phenotypic variation,and allometry in genitalic and non‐genitalic traits in the sexually size‐dimorphic stick insect Micrarchus hystriculeus

The mobility hypothesis could explain the evolution of female‐biased size dimorphism if males with a smaller body size and longer legs have an advantage in scramble competition for mates. This hypothesis is tested by performing a selection analysis in the wild on Micrarchus hystriculeus (Westwood) (Phasmatodea), a sexually size dimorphic stick insect endemic to New Zealand. This analysis examined the form and strength of sexual selection on body size, leg lengths (front, mid and hind), and clasper size (a genitalic trait), and also quantified the degree of phenotypic variation and the allometric scaling pattern of these traits. By contrast to the mobility hypothesis, three lines of evidence were found to support significant stabilizing sexual selection on male hind leg length: a significant nonlinear selection gradient, negative static allometry, and a low degree of phenotypic variation. Hind leg length might be under stabilizing selection in males if having average‐sized legs facilitates female mounting or improves a male's ability to achieve the appropriate copulation position. As predicted, a negative allometric scaling pattern and low phenotypic variation of clasper size is suggestive of stabilizing selection and supports the ‘one‐size‐fits‐all’ hypothesis. Opposite to males, the mid and hind leg lengths of females showed positive static allometry. Relatively longer mid and hind leg lengths in larger females might benefit individuals via the better support of their larger abdomens. © 2014 The Linnean Society of London, Biological Journal of the Linnean Society, 2014, 113 , 471–484.     

Genital and body allometry in two species of noctuid moths (Lepidoptera: Noctuidae)

One‐size‐fits‐all and related hypotheses predict that static allometry slopes for male genitalia will be consistently lower than 1.0 and lower than the slopes for most other body parts (somatic traits). We examined the allometry of genitalic and somatic morphological traits in males and females of two species of noctuid moths, Spodoptera exigua (Hübner, [1808]) and Helicoverpa armigera (Hübner, [1808]). The relationship between genitalic traits and body size was generally strongly negative‐allometric in males but with no significant differences from 1.00 in females of the two species examined. However, in females, the slope of genital traits was also lower than the slopes for somatic traits. The relationship between somatic traits and the body size indicator was approximately isometric in most cases in males, except in four traits in S. exigua, in which the slopes showed slight negative allometry, and the hind tibia in H. armigera, in which the slope had positive allometry. However, in females, some somatic traits showed isometric and some other showed negative allometry in both species. The coefficients of variation (CV) for all structures in the males were low, not exceeding 10%. Genitalic traits showed significantly lower CV than somatic traits in males. In females, somatic traits showed lower CV than genitalic traits but with no significant difference in the H. armigera. Our observations of strongly negative allometry for genitalic traits in males are consistent with stabilizing selection on genital size and we suggest that male performance in interactions with females is the source of selection on male genital allometry. The difference in the degree of phenotypic variation between genitalic and somatic traits in the two studied species is attributed to the different developmental‐genetic architectures of these traits. Female genitalia showed a similar trend to the males, although the difference between genital and somatic traits was not significant in females. This finding suggests that selection is acting differently on male and female genitalia. Positive allometry of hind tibia in H. armigera may be a result of secondary sexual function.     

Male Genital Allometry in Scathophagidae (Diptera)

Male genital structures are extremely divergent across species and sexual selection is largely responsible. Many sexually selected traits show positive allometry and have high phenotypic coefficients of variation (CV). Sexually-selected genital traits that come into contact with females during copula may be an exception to this general pattern. We compared the within species size allometry of the genital claspers, mandibular palps, and testes in a comparative study across the Scathophagidae. We additionally compared the levels of phenotypic variation in these traits and in hind tibia length. Within species, claspers typically displayed negative allometry and had low CV, indicative of stabilizing selection. In contrast, testis size was more like sexually selected display traits, typically being positively allometric and having very large CV. Palps tended to be positively allometric or isometric, and intermediate in levels of phenotypic variation, much like leg length. In spite of intraspecific stabilizing selection on the genital claspers, there has been major divergence of these characters across species. Co-ordinating editor. F. Stuefer