Photocatalytic activity of MCM-organized TiO(2) materials in the oxygenation of cyclohexane with molecular oxygen

The photooxygenation of cyclohexane by molecular oxygen has been investigated on two mesoporous TiO(2) materials, which have been prepared using colloidal nanoparticles as building blocks. One of the structured systems (mpTiO(2)-50) is a mixture of 50% TiO(2) and 50% SiO(2); the second one (mpTiO(2)-100) is constituted by 100% of TiO(2). Both mpTiO(2)-100 and mpTiO(2)-50 can induce cyclohexane photooxidation in repeated cycles, but with the former the yield in cyclohexanone is higher and only traces of cyclohexanol are observed. The results of experiments with different incident light intensities are reported: contrary to mpTiO(2)-50, the selectivity of mpTiO(2)-100 towards cyclohexanone is not significantly affected by the photonic flux. Based on the substrate conversion rates, incident photonic flux effects, photoluminescence and EPR spectra of the mesoporous materials, we infer that the photoreactivity of mpTiO(2)-100 and mpTiO(2)-50 is mainly controlled by textural effects. In particular, we propose that the inter-particle electron mobility that characterizes the mpTiO(2)-100 material, which is constituted exclusively of TiO(2) nanoparticles, entails a better utilization of electron traps for converting the photogenerated cyclohexyl-peroxide radicals to cyclohexanone.     

Eye lens ageing in the dogfish (Mustelus canis).

1. Age-related alterations in the distribution of water-soluble, high molecular weight (colloidal), and water-insoluble proteins of the lens of smooth dogfish (Mustelus canis) were measured. 2. The ages of these animals ranged approx from 2 to 50 yr, during which time the lenses grew from 100 to 1500 mg (wet wt). The lenses contained approx 50% water. 3. Water-insoluble protein accumulated to a level greater than 50% of the total proteins by the time the animals reached maturity. The lenses of other animals, such as mammals and humans, would be opaque if they had a similar insoluble protein content. 4. Each protein fraction contained the same protein chains (mol. et 1900-25,000 daltons), as observed by SDS polyacrylamide gel electrophoresis, except the water-insoluble fraction, which seemed to contain several extra protein chains with higher molecular weights, which represent fiber cell membrane components. 5. Further purification of these fiber cell membranes indicated that their protein chain makeup was mainly from the same low molecular weight chains present in the soluble and high molecular weight colloidal proteins.     

A review of the potential and versatility of colloidal gold cytochemical labeling for molecular morphology.

In the present article we review several postembedding cytochemical techniques using the colloidal gold marker. Owing to the high atomic number of gold, the colloidal gold particles are electron dense. They are spherical in shape and can be prepared in sizes from 1 to 25 nm, which renders this marker among the best for electron microscopy. In addition, because it can be bound to several molecules, this marker has the advantage of being extremely versatile. Combined to immunoglobulins or immunoglobulin-binding proteins (protein A), it has been applied successfully in immunocytochemistry. Colloidal gold particles 5-15 nm in size are excellent for postembedding cytochemistry. Particles of smaller size, such as 1 nm, must be silver enhanced to be visualized by transmission electron microscopy. We have elected to review the superiority of indirect immunocytochemical approaches using IgG-gold or protein A-gold (protein G-gold and protein AG-gold). Lectins or enzymes can be tagged with colloidal gold particles, and the corresponding lectin-gold and enzyme-gold techniques have specific advantages and great potential. Using an indirect digoxigenin-tagged nucleotide and an antidigoxigenin probe, colloidal gold technology can also be used for in situ hybridization at the electron microscope level. Affinity characteristics lie behind all cytochemical techniques and several molecules displaying high affinity properties can also be beneficial for colloidal gold electron microscopy cytochemistry. All of these techniques can be combined in various ways to produce multiple labelings of several binding sites on the same tissue section. Colloidal gold is particulate and can easily be counted; thus the cytochemical signal can be evaluated quantitatively, introducing further advantages to the use of the colloidal gold marker. Finally, several combinations and multiple step procedures have been designed to amplify the final signal which renders the techniques more sensitive. The approaches reviewed here have been applied successfully in different fields of cell and molecular biology, cell pathology, plant biology and pathology, microbiology and virology. The potential of the approaches is emphasized in addition to different ways to assess specificity, sensitivity and accuracy of results.     

Fabrication of stratified nanoporous gold for enhanced biosensing

By a dealloying/annealing/redealloying strategy, nanoporous gold (NPG) with hierarchical microstructure is fabricated for electrochemical biosensing application. The first dealloying and annealing would produce NPG/AuAg alloy composite with a large-pore NPG layer and the second dealloying would further etch the AuAg alloy part in the composite, generating a small-pore NPG layer. By using the large-pore (≈ 100 nm) layer as the glucose oxidase (GOx) container, and the small-pore (≈ 12 nm) layer as a signal producer, this novel hierarchical NPG is demonstrated to be a good support for enzyme immobilization and fabricating enzyme-based biosensors. The immobilized GOx retains ≈ 92% of the initial activity after 7 repeated use. The GOx-loaded stratified NPG biosensor can detect glucose more sensitively with a wider linear range (up to 22 mM) than normal NPG with a uniform pore size of 30-40 nm (linear range: up to 17 mM).     

A chemiluminescent metalloimmunoassay based on silver deposition on colloidal gold labels

A sensitive chemiluminescent (CL) immunoassay of human immunoglobulin (IgG) which combined the inherent high sensitivity of CL analysis with the dramatic signal amplification of silver precipitation on colloidal gold tags was developed. First, the sandwich-type complex was formed in this protocol by the primary antibody immobilized on the polystyrene wells, the analyte in the sample, and the secondary antibody labeled with colloidal gold. Second, the colloidal gold was treated by an Ag(+) reduction solution, which resulted in the catalytic precipitation of silver on the surface of colloidal gold. Third, a large number of Ag(+) were oxidatively released in HNO(3) solution from the silver metal anchored on the sandwich-type complexes and then the human IgG was indirectly determined by a sensitive combined CL reaction of Ag(+)-K(2)S(2)O(8)-Mn(2+)- H(3)PO(4)-luminol. The chemiluminescence intensity depends linearly on the logarithm of the concentration of human IgG over the range of 0.02-50ngml(-1) and detection limit (3sigma) is 0.005ngml(-1) (i.e., approximately 3x10(-14)M, 3amol in 100-mul sample). This assay has been successfully applied to the determination of human IgG in human serum samples and showed great potential for numerous applications in immunoassay.     

A Review of the Potential and Versatility of Colloidal Gold Cytochemical Labeling for Molecular Morphology

In the present article we review several postembedding cytochemical techniques using the colloidal gold marker. Owing to the high atomic number of gold, the colloidal gold particles are electron dense. They are spherical in shape and can be prepared in sizes from 1 to 25 nm, which renders this marker among the best for electron microscopy. In addition, because it can be bound to several molecules, this marker has the advantage of being extremely versatile. Combined to immunoglobulins or immunoglobulin-binding proteins (protein A), it has been applied successfully in immunocytochemistry. Colloidal gold particles 5–15 nm in size are excellent for postembedding cytochemistry. Particles of smaller size, such as 1 nm, must be silver enhanced to be visualized by transmission electron microscopy. We have elected to review the superiority of indirect immunocytochemical approaches using IgG-gold or protein A-gold (protein G-gold and protein AG-gold). Lectins or enzymes can be tagged with colloidal gold particles, and the corresponding lectin-gold and enzyme-gold techniques have specific advantages and great potential. Using an indirect digoxigenin-tagged nucleotide and an antidigoxigenin probe, colloidal gold technology can also be used for in situ hybridization at the electron microscope level. Affinity characteristics lie behind all cytochemical techniques and several molecules displaying high affinity properties can also be beneficial for colloidal gold electron microscopy cytochemistry. All of these techniques can be combined in various ways to produce multiple labelings of several binding sites on the same tissue section. Colloidal gold is particulate and can easily be counted; thus the cytochemical signal can be evaluated quantitatively, introducing further advantages to the use of the colloidal gold marker. Finally, several combinations and multiple step procedures have been designed to amplify the final signal which renders the techniques more sensitive. The approaches reviewed here have been applied successfully in different fields of cell and molecular biology, cell pathology, plant biology and pathology, microbiology and virology. The potential of the approaches is emphasized in addition to different ways to assess specificity, sensitivity and accuracy of results.     

Highly hydrophobic electrospun fiber mats from polyisobutylene-based thermoplastic elastomers

This paper is the first report of electrospinning neat polyisobutylene-based thermoplastic elastomers. Two generations of these materials are investigated: a linear poly(styrene-b-isobutylene-b-styrene) (L_SIBS) triblock copolymer and a dendritic poly(isobutylene-b-p-methylstyrene) (D_IB-MS), also a candidate for biomedical applications. Cross-polarized optical microscopy shows birefringence, indicating orientation in the electrospun fibers, which undergo large elongation and shear during electrospinning. In contrast to the circular cross section of L_SIBS fibers, D_IB-MS yields dumbbell-shaped fiber cross sections for the combination of processing conditions, molecular weight, and architecture. Hydrophobic surfaces with a water contact angle as high as 146 ± 3° were obtained with D_IB-MS that had the noncircular fiber cross section and a hierarchical arrangement of nano- to micrometer-sized fibers in the mat. These highly water repellent fiber mats were found to serve as an excellent scaffold for bovine chondrocytes to produce cartilage tissue.     

Design of polymeric microparticles for pH-responsive and time-sustained drug release

We described the design of uniform microencapsulates with almost 100% encapsulation efficiency, synthesized without organic solvents, via microfluidic spray drying of water-based dispersions of pH-responsive methacrylic acid polymers (Eudragit^® L 30D-55). The effects of incorporating water-based network-forming materials in the formulations on pH-responsiveness and controlled release patterns of enteric microparticles were observed. Acid hydrolysed tetraethoxysilane (TEOS) was used to form an interpenetrating, rigid framework of silica, whereas Eudragit^® NE (a copolymer based on ethyl acrylate and methyl methacrylate) was added to produce a more flexible polymeric network. The spray-dried microparticles generally displayed crumbled or buckled morphologies dependent on drying temperatures, due to large hydrodynamic sizes of solutes in feed dispersions. The drug release kinetics of microparticles were sensitive to the type and the added amount of network-forming materials, due to different colloidal interactions between Eudragit^® L and either silica or the copolymer. This study demonstrated a strategy to design enteric microparticles with different microstructural properties and drug release behaviours through understanding of colloidal interactions between constituents of matrix materials.     

In situ monitoring of cell death using Raman microspectroscopy

We investigated the use of Raman microspectroscopy to monitor the molecular changes in human lung carcinoma epithelial cells (A549) when cell death was induced by a toxic chemical. We treated A549 cells with 100 microM Triton X-100 and carried out Raman microspectroscopy measurements in parallel with cell viability and DNA integrity assays at time points of 0, 24, 48, and 72 hours. We found that the important biochemical changes taking place during cell death, such as the degradation of proteins, DNA breakdown, and the formation of lipid vesicles, can be detected with Raman microspectroscopy. A decrease in the intensity of the O-P-O stretching Raman peak corresponding to the DNA molecule phosphate-sugar backbone at 788 cm(-1) indicated DNA disintegration, an observation which was confirmed by DNA integrity analysis. We also found a decrease in the intensity of the Raman peaks corresponding to proteins (1005 cm(-1), 1342 cm(-1)) and an increase in the concentration of lipids (1660 cm(-1), 1303 cm(-1)). These changes are the effects of the complex molecular mechanisms during the induction of cell death, such as protein cleavage due to the activation of caspases, followed by DNA fragmentation.     

An electrochemical stripping metalloimmunoassay based on silver-enhanced gold nanoparticle label

A novel, sensitive electrochemical immunoassay has been developed based on the precipitation of silver on colloidal gold labels which, after silver metal dissolution in an acidic solution, was indirectly determined by anodic stripping voltammetry (ASV) at a glassy-carbon electrode. The method was evaluated for a noncompetitive heterogeneous immunoassay of an immunoglobulin G (IgG) as a model. The influence of relevant experimental variables, including the reaction time of antigen with antibody, the dilution ratio of the colloidal gold-labeled antibody and the parameters of the anodic stripping operation, upon the peak current was examined and optimized. The anodic stripping peak current depended linearly on the IgG concentration over the range of 1.66 ng ml(-1) to 27.25 microg ml(-1) in a logarithmic plot. A detection limit as low as 1 ng ml(-1) (i.e., 6 x 10(-12) M) human IgG was achieved, which is competitive with colorimetric enzyme linked immuno-sorbent assay (ELISA) or with immunoassays based on fluorescent europium chelate labels. The high performance of the method is attributed to the sensitive ASV determination of silver (I) at a glassy-carbon electrode (detection limit of 5 x 10(-9) M) and to the catalytic precipitation of a large number of silver on the colloidal gold-labeled antibody.     

Compressive nanomechanics of opposing aggrecan macromolecules

In this study, we have measured the nanoscale compressive interactions between opposing aggrecan macromolecules in near-physiological conditions, in order to elucidate the molecular origins of tissue-level cartilage biomechanical behavior. Aggrecan molecules from fetal bovine epiphyseal cartilage were chemically end-grafted to planar substrates, standard nanosized atomic force microscopy (AFM) probe tips (R(tip) approximately 50 nm), and larger colloidal probe tips (R(tip) approximately 2.5 microm). To assess normal nanomechanical interaction forces between opposing aggrecan layers, substrates with microcontact printed aggrecan were imaged using contact mode AFM, and aggrecan layer height (and hence deformation) was measured as a function of solution ionic strength (IS) and applied normal load. Then, using high-resolution force spectroscopy, nanoscale compressive forces between opposing aggrecan on the tip and substrate were measured versus tip-substrate separation distance in 0.001-1M NaCl. Nanosized tips enabled measurement of the molecular stiffness of 2-4 aggrecan while colloidal tips probed the nanomechanical properties of larger assemblies (approximately 10(4) molecules). The compressive stiffness of aggrecan was much higher when using a densely packed colloidal tip than the stiffness measured for using the nanosized tip with a few aggrecan, demonstrating the importance of lateral interactions to the normal nanomechanical properties. The measured stress at 0.1M NaCl (near-physiological ionic strength) increased sharply at aggrecan densities under the tip of approximately 40 mg/ml (physiological densities are approximately 20-80 mg/ml), corresponding to an average inter-GAG spacing of 4-5 Debye lengths (4-5 nm); this characteristic spacing is consistent with the onset of significant electrostatic interactions between GAG chains of opposing aggrecan molecules. Comparison of nanomechanical data to the predictions of Poisson-Boltzmann-based models further elucidated the regimes over which electrostatic and nonelectrostatic interactions affect aggrecan stiffness in compression. The most important aspects of this study include: the incorporation of experiments at two different length scales, the use of microcontact printing to enable quantification of aggrecan deformation and the corresponding nanoscale compressive stress vs. strain curve, the use of tips of differing functionality to provide insights into the molecular mechanisms of deformation, and the comparison of experimental data to the predictions of three increasingly refined Poisson-Boltzmann (P-B)-based theoretical models for the electrostatic double layer component of the interaction.     

Colloidal gold as an electrochemical label of streptavidin-biotin interaction

A new electrochemical method to monitor biotin-streptavidin interaction, based on the use of colloidal gold as an electrochemical label, is investigated. Biotinylated albumin is adsorbed on the pretreated surface of a carbon paste electrode (CPE). This modified electrode is immersed in colloidal gold-streptavidin labelled solutions. Adsorptive voltammetry is used to monitor colloidal gold bound to streptavidin, obtaining a good reproducibility of the analytical signal (R.S.D. = 3.3%). A linear relationship between peak current and streptavidin concentration from 2.5 x 10(-9) to 2.5 x 10(-5) M is obtained when a sequential competitive assay between streptavidin and colloidal gold-labelled streptavidin is carried out. On the other hand, the adsorption of streptavidin on the electrode surface was performed, followed by the reaction with biotinylated albumin labelled with colloidal gold. In this way, a linear relationship between peak current and colloidal gold labelled biotinylated albumin concentration is achieved with a limit of detection of 7.3 x 10(9) gold particles per ml (5.29 x 10(-9) M in biotin).     

Stereo- and biochemical profiles of the 5-6- and 6-6-junction isomers of alpha-D-mannopyranosyl [60]fullerenes

The 5-6- and 6-6-junction isomers of alpha-D-mannopyranosyl [60]fullerene were studied by means of circular dichroism (CD), deuterium labeling, 1H-NMR, molecular-dynamics (MD) calculations, and a lectin-binding assay. The CD spectra of the O-acetylated derivatives allowed clear discrimination of the isomers, while the 1H-NMR spectra, with assistance from deuterium labeling and MD calculations, served to disclose the unique conformation and molecular geometry of each acetylated isomer in chloroform solution. The deprotected 5-6- and 6-6-isomers, which gave colloidal suspensions in aqueous mixtures, displayed marked activity in blocking lectin-induced hemagglutination by concanavalin A.     

The need and means to characterize sediment structure and behaviour prior to the selection and implementation of remediation plans

Remediation of contaminated sediments requires detailed characterizations of the speciation of the toxic substances and their transformations with regard to time and spatial distribution. While many approaches exist to address dissolved species of toxicants, there is a need to characterize sediments per se in terms of materials or particles which bind toxicants and modulate their bioavailability and rate of burial. Such specific information can be achieved through the correlative use of analytical microscopies, applied directly to native aquatic materials and used in conjunction with novel particle isolation methods and standard techniques of analytical chemistry. Such sedimentary `materials' are dominated by clays and other colloidal minerals, microorganisms, humic substances, organic debris, iron and manganese oxide coatings and extracellular polymeric substances. By using new technology to (1) identify particles and their relative abundances, (2) examine specific toxicant/particle associations at the scale of individual abundant particles, and (3) follow transformations over time, we produce information more insightful than was obtainable previously. Such knowledge will assist in determining which remediation technologies would be best for a given contaminated sediment (i.e. `intrinsic remediation' or dredging/disposal).     

Protein AG-gold complex: an alternative probe in immunocytochemistry.

The purpose of this study was to evaluate the use of protein AG tagged with colloidal gold as a reliable immunocytochemical reagent. Protein AG is a recombinant of 47.3 KD molecular weight and pI = 4.3, which displays immunoglobulin Fc binding sites for both staphylococcal protein A and streptococcal protein G. It adsorbs to 10-nm colloidal gold particles with a lower affinity than does protein A, and is saturable. A maximal number of 12 protein AG molecules could be accommodated on the gold particle surface. Protein AG-gold conjugates yielded positive signals in post-embedding immunocytochemical assays when used as a secondary reagent in conjunction with several species and classes of polyclonal (rabbit, goat, sheep, guinea pig) and mouse monoclonal immunoglobulins (IgG1, IgG2, and IgG3). In addition, protein AG-gold was found to be a useful reagent in immunoblot analysis because of its ability to bind and identify nitrocellulose-immobilized IgGs (rabbit, mouse, goat, sheep, rat, and cow). Its spectrum of specificity towards various types of antibodies combines those of the parental protein A and protein G molecules. The protein AG-gold complex therefore appears to be a highly versatile and convenient alternative probe for immunochemical and immunocytochemical studies.     

Mesoscopic dynamics of colloids simulated with dissipative particle dynamics and fluid particle model

We report results of numerical simulations of complex fluids, using a combination of discrete-particle methods. Our molecular modeling repertoire comprises three simulation techniques: molecular dynamics (MD), dissipative particle dynamics (DPD), and the fluid particle model (FPM). This type of model can depict multi-resolution molecular structures (see the Figure) found in complex fluids ranging from single micelle, colloidal crystals, large-scale colloidal aggregates up to the mesoscale processes of hydrodynamical instabilities in the bulk of colloidal suspensions. We can simulate different colloidal structures in which the colloidal beds are of comparable size to the solvent particles. This undertaking is accomplished with a two-level discrete particle model consisting of the MD paradigm with a Lennard-Jones (L-J) type potential for defining the colloidal particle system and DPD or FPM for modeling the solvent. We observe the spontaneous emergence of spherical or rod-like micelles and their crystallization in stable hexagonal or worm-like structures, respectively. The ordered arrays obtained by using the particle model are similar to the 2D colloidal crystals observed in laboratory experiments. The micelle shape and its hydrophobic or hydrophilic character depend on the ratio between the scaling factors of the interactions between colloid–colloid to colloid–solvent. Unlike the miscellar arrays, the colloidal aggregates involve the colloid–solvent interactions prescribed by the DPD forces. Different from the assumption of equilibrium growth, the two-level particle model can display much more realistic molecular physics, which allows for the simulation of aggregation for various types of colloids and solvent liquids over a very broad range of conditions. We discuss the potential prospects of combining MD, DPD, and FPM techniques in a single three-level model. Finally, we present results from large-scale simulation of the Rayleigh–Taylor instability and dispersion of colloidal slab in 2D and 3D. Electronic supplementary material to this paper can be obtained by using the Springer LINK server located at http://dx.doi.org/10.1007/s00894-001-0068-3.Electronic Supplementary Material available.     

Nitrogen‐Doped Wrinkled Carbon Foils Derived from MOF Nanosheets for Superior Sodium Storage

Preparation of hierarchical carbon nanomaterials from metal?organicframeworks (MOFs) offers immense potential in the improvement of energy density, tunability, and stability of functional materials for energy storage and conversion. How interconnected nitrogen (N)‐doped wrinkled carbon foils derived from MOF nanosheets can serve as high‐performance sodium storage materials due to their multiscale porous structure is shown here. The novel N‐doped carbon nanomaterials are synthesized through the pyrolysis of 2D Mn‐based MOFs, which are produced through the assistance of monodentate ligands to enable the planar growth of MOFs. Subsequent acid etching creates hierarchical pores and channels to allow rapid ion transport. The resulting materials achieve high‐rate capability (165 and 150 mA h g^?1 at current densities of 8 and 10 A g^?1, respectively) and high stability (capacity retention 72.8% after 1000 cycling at 1.0 A g^?1), when they are used as anode in sodium‐ion capacitors.     

Preliminary assessment of removal of pyrogenic lipopolysaccharides with colloidal zirconia adsorbents.

Preliminary evaluation of bare or polymer-coated colloidal monoclinic zirconia of nominal particle size 100 nm indicated that it is an effective adsorbent for pyrogenic lipopolysaccharides (LPS) as measured by chemical and Limulus amebocyte lysate (LAL) assays. Zirconia at 50 micrograms ml-1 adsorbed 99.95% of added E. coli O128 LPS. Residual LPS levels below 0.1 ng ml-1 were easily attained. Colloidal zirconia was able to remove LPS from solution in the presence of bovine albumin (BSA). Some LPS contaminating BSA lacked affinity for zirconia. Preadsorption of phosphate onto bare zirconia blocked LPS adsorption. However, phosphated-oligomeric glycidyl (epoxy) pentaerythritol-coated colloidal zirconia could be derivatized with imidazole-containing ligands to produce an LPS-binding surface. Preliminary results of adsorption of LPS by the coated particles indicated a reduced level of LPS binding compared to bare zirconia, probably because the particles aggregated during the derivatization process, reducing the effective surface available for LPS adsorption.     

Biorefinery of sweet sorghum stem

Sweet sorghum has been considered as a viable energy crop for alcohol fuel production. This review discloses a novel approach for the biorefining of sweet sorghum stem to produce multiple valuable products, such as ethanol, butanol and wood plastic composites. Sweet sorghum stem has a high concentration of soluble sugars in its juice, which can be fermented to produce ethanol by Saccharomyces cerevisiae. In order to obtain high ethanol yield and fermentation rates, concentrated juice with an initial total sugar concentration of 300gL(-1) was fermented. The maximum ethanol concentration after 54h reached 140gL(-1) with a yield of 0.49g ethanol per g consumed sugar, which is 97% of the theoretical value. Sweet sorghum bagasse, obtained from juice squeezing, was pretreated by acetic acid to hydrolyze 80-90% of the contained hemicelluloses. Using this hydrolysate as raw material (total sugar 55gL(-1)), 19.21gL(-1) total solvent (butanol 9.34g, ethanol 2.5g, and acetone 7.36g) was produced by Clostridium acetobutylicum. The residual bagasse after pretreatment was extruded with PLA in a twin-screw extruder to produce a final product having a PLA: fiber ratio of 2:1, a tensile strength of 49.5M and a flexible strength of 65MPa. This product has potential use for applications where truly biodegradable materials are required. This strategy for sustainability is crucial for the industrialization of biofuels from sweet sorghum.