Enzymatic hydrolysis of chemithermomechanically pretreated sugarcane bagasse and samples with reduced initial lignin content

Chemithermomechanical (CTM) processing was used to pretreat sugarcane bagasse with the aim of increasing cell wall accessibility to hydrolytic enzymes. Yields of the pretreated samples were in the range of 75-94%. Disk refining and alkaline-CTM and alkaline/sulfite-CTM pretreatments yielded pretreated materials with 21.7, 17.8, and 15.3% of lignin, respectively. Hemicellulose content was also decreased to some extent. Fibers of the pretreated materials presented some external fibrillation, fiber curling, increased swelling, and high water retention capacity. Cellulose conversion of the alkaline-CTM- and alkaline/sulfite-CTM-pretreated samples reached 50 and 85%, respectively, after 96 h of enzymatic hydrolysis. Two samples with low initial lignin content were also evaluated after the mildest alkaline-CTM pretreatment. One sample was a partially delignified mill-processed bagasse. The other was a sugarcane hybrid selected in a breeding program. Samples with lower initial lignin content were hydrolyzed considerably faster in the first 24 h of enzymatic digestion. For example, enzymatic hydrolysis of the sample with the lowest initial lignin content (14.2%) reached 64% cellulose conversion after only 24 h of hydrolysis when compared with the 30% observed for the mill-processed bagasse containing an initial lignin content of 24.4%.     

Comparative hydrolysis and fermentation of sugarcane and agave bagasse

Sugarcane and agave bagasse samples were hydrolyzed with either mineral acids (HCl), commercial glucanases or a combined treatment consisting of alkaline delignification followed by enzymatic hydrolysis. Acid hydrolysis of sugar cane bagasse yielded a higher level of reducing sugars (37.21% for depithed bagasse and 35.37% for pith bagasse), when compared to metzal or metzontete (agave pinecone and leaves, 5.02% and 9.91%, respectively). An optimized enzyme formulation was used to process sugar cane bagasse, which contained Celluclast, Novozyme and Viscozyme L. From alkaline–enzymatic hydrolysis of sugarcane bagasse samples, a reduced level of reducing sugar yield was obtained (11–20%) compared to agave bagasse (12–58%). Selected hydrolyzates were fermented with a non-recombinant strain of Saccharomyces cerevisiae. Maximum alcohol yield by fermentation (32.6%) was obtained from the hydrolyzate of sugarcane depithed bagasse. Hydrolyzed agave waste residues provide an increased glucose decreased xylose product useful for biotechnological conversion.     

乙酸分级预处理甘蔗渣对纤维素酶解性能的影响

为提高甘蔗渣的纤维素酶解性能,采用乙酸脱木素结合碱脱乙酰基的预处理工艺 (Acetoline工艺) 对甘蔗渣进行预处理,考察了乙酸脱木素过程中若干因素对预处理结果的影响,并对预处理后甘蔗渣的纤维素酶解性能进行了研究。结果表明,经过Acetoline预处理后甘蔗渣在7.5％固体含量、15 FPU+10 CBU/g固体的纤维素酶和β-葡萄糖苷酶用量下酶解48 h,酶解聚糖转化率接近80％。与稀酸预处理相比,Acetoline预处理可以得到更高的酶解聚糖转化率。实验结果表明Acetoline工艺是一种可有效提高甘蔗渣纤维素酶解性能的预处理方法。     

Comparing impacts of physicochemical properties and hydrolytic inhibitors on enzymatic hydrolysis of sugarcane bagasse

An autohydrolysis pretreatment with different conditions was applied to sugarcane bagasse to compare the impacts of the physicochemical properties and hydrolytic inhibitors on its enzymatic hydrolysis. The results indicate that the autohydrolysis conditions significantly affected the physicochemical properties and inhibitors, which further affected the enzymatic hydrolysis. The inhibitor amount, pore size, and crystallinity degree increased with increasing autohydrolysis severity. Furthermore, the enzymatic hydrolysis was enhanced with increasing severity owing to the removal of hemicellulose and lignin. The physicochemical obstruction impeded the enzymatic hydrolysis more than the inhibitors. The multivariate correlated component regression analysis enabled an evaluation of the correlations between the physicochemical properties (and inhibitors) and enzymatic hydrolysis for the first time. According to the results, an autohydrolysis with a severity of 4.01 is an ideal pretreatment for sugarcane bagasse for sugar production.

     

Alkali‐based AFEX pretreatment for the conversion of sugarcane bagasse and cane leaf residues to ethanol

Sugarcane is one of the major agricultural crops cultivated in tropical climate regions of the world. Each tonne of raw cane production is associated with the generation of 130 kg dry weight of bagasse after juice extraction and 250 kg dry weight of cane leaf residue postharvest. The annual world production of sugarcane is ～1.6 billion tones, generating 279 MMT tones of biomass residues (bagasse and cane leaf matter) that would be available for cellulosic ethanol production. Here, we investigated the production of cellulosic ethanol from sugar cane bagasse and sugar cane leaf residue using an alkaline pretreatment: ammonia fiber expansion (AFEX). The AFEX pretreatment improved the accessibility of cellulose and hemicelluloses to enzymes during hydrolysis by breaking down the ester linkages and other lignin carbohydrate complex (LCC) bonds and the sugar produced by this process is found to be highly fermentable. The maximum glucan conversion of AFEX pretreated bagasse and cane leaf residue by cellulases was ～85%. Supplementation with hemicellulases during enzymatic hydrolysis improved the xylan conversion up to 95–98%. Xylanase supplementation also contributed to a marginal improvement in the glucan conversion. AFEX‐treated cane leaf residue was found to have a greater enzymatic digestibility compared to AFEX‐treated bagasse. Co‐fermentation of glucose and xylose, produced from high solid loading (6% glucan) hydrolysis of AFEX‐treated bagasse and cane leaf residue, using the recombinant Saccharomyces cerevisiae (424A LNH‐ST) produced 34–36 g/L of ethanol with 92% theoretical yield. These results demonstrate that AFEX pretreatment is a viable process for conversion of bagasse and cane leaf residue into cellulosic ethanol. Biotechnol. Bioeng. 2010;107: 441–450. © 2010 Wiley Periodicals, Inc.     

Enhancement of the enzymatic digestibility of sugarcane bagasse by steam pretreatment impregnated with hydrogen peroxide

Sugarcane bagasse was subjected to steam pretreatment impregnated with hydrogen peroxide. Analyses were performed using 2³ factorial designs and enzymatic hydrolysis was performed at two different solid concentrations and with washed and unwashed material to evaluate the importance of this step for obtaining high cellulose conversion. Similar cellulose conversion were obtained at different conditions of pretreatment and hydrolysis. When the cellulose was hydrolyzed using the pretreated material in the most severe conditions of the experimental design (210°C, 15 min and 1.0% hydrogen peroxide), and using 2% (w/w) water‐insoluble solids (WIS), and 15 FPU/g WIS, the cellulose conversion was 86.9%. In contrast, at a milder pretreatment condition (190°C, 15 min and 0.2% hydrogen peroxide) and industrially more realistic conditions of hydrolysis (10% WIS and 10 FPU/g WIS), the cellulose conversion reached 82.2%. The step of washing the pretreated material was very important to obtain high concentrations of fermentable sugars. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

An approach to cellulase recovery from enzymatic hydrolysis of pretreated sugarcane bagasse with high lignin content

The possibility of recovering the cellulases used for enzymatic hydrolysis of sugarcane bagasse was evaluated. A strategy was adopted to maximize the enzyme recovery: desorption of the enzymes adsorbed in the solid residue after hydrolysis, and re-adsorption of the enzymes from the liquid medium onto a fresh substrate. The use of surfactant during the enzymatic hydrolysis was important to improve the glucose release from the material structure and also to facilitate the enzyme desorption from the solid residue after hydrolysis. The temperature and pH used during desorption influenced the enzymes recovery, with the best results (90% adsorbed cellulase) being achieved at 45?°C and pH 5.5. The enzymes present in the liquid medium after enzymatic hydrolysis were partially recovered (77%) by adsorption onto the fresh substrate and used in new enzymatic hydrolysis batches. It was concluded that it is possible to recycle cellulases from an enzymatic medium for use in subsequent hydrolysis processes.     

Study of kinetic parameters in a mechanistic model for enzymatic hydrolysis of sugarcane bagasse subjected to different pretreatments

The goal of this work is to evaluate the influence of different pretreatments in the kinetics of enzymatic hydrolysis of sugarcane bagasse and to propose a reliable methodology to easily perform sensitivity analysis and updating kinetic parameters whenever necessary. A kinetic model was modified to represent the experimental data of the batch enzymatic hydrolysis of sugarcane bagasse pretreated with alkaline hydrogen peroxide. The simultaneous estimation of kinetic parameters of the mathematical model was performed using the Pikaia genetic algorithm using batch hydrolysis experimental data obtained with different enzymatic loads. Subsequently, Plackett–Burman designs were used to identify the kinetic parameters with the higher influence on the dynamic behavior of the process variables, which were re-estimated to describe experimental data of the hydrolysis of bagasse pretreated with phosphoric acid + sodium hydroxide. The methodology was accurate and straightforward and can be used whenever there are changes in pretreatment conditions and/or fluctuations in biomass composition in different harvests.     

Xylan extraction from pretreated sugarcane bagasse using alkaline and enzymatic approaches

Background

New biorefinery concepts are necessary to drive industrial use of lignocellulose biomass components. Xylan recovery before enzymatic hydrolysis of the glucan component is a way to add value to the hemicellulose fraction, which can be used in papermaking, pharmaceutical, and food industries. Hemicellulose removal can also facilitate subsequent cellulolytic glucan hydrolysis.

Results

Sugarcane bagasse was pretreated with an alkaline-sulfite chemithermomechanical process to facilitate subsequent extraction of xylan by enzymatic or alkaline procedures. Alkaline extraction methods yielded 53% (w/w) xylan recovery. The enzymatic approach provided a limited yield of 22% (w/w) but produced the xylan with the lowest contamination with lignin and glucan components. All extracted xylans presented arabinosyl side groups and absence of acetylation. 2D-NMR data suggested the presence of O-methyl-glucuronic acid and p-coumarates only in enzymatically extracted xylan. Xylans isolated using the enzymatic approach resulted in products with molecular weights (Mw) lower than 6 kDa. Higher Mw values were detected in the alkali-isolated xylans. Alkaline extraction of xylan provided a glucan-enriched solid readily hydrolysable with low cellulase loads, generating hydrolysates with a high glucose/xylose ratio.

Conclusions

Hemicellulose removal before enzymatic hydrolysis of the cellulosic fraction proved to be an efficient manner to add value to sugarcane bagasse biorefining. Xylans with varied yield, purity, and structure can be obtained according to the extraction method. Enzymatic extraction procedures produce high-purity xylans at low yield, whereas alkaline extraction methods provided higher xylan yields with more lignin and glucan contamination. When xylan extraction is performed with alkaline methods, the residual glucan-enriched solid seems suitable for glucose production employing low cellulase loadings.

     

Efficient conversion of sugarcane stalks into ethanol employing low temperature alkali pretreatment method

An alternative route for bio-ethanol production from sugarcane stalks (juice and bagasse) featuring a previously reported low temperature alkali pretreatment method was evaluated. Test-tube scale pretreatment-saccharification experiments were carried out to determine optimal LTA pretreatment conditions for sugarcane bagasse with regard to the efficiency of enzymatic hydrolysis of the cellulose. Free fermentable sugars and bagasse recovered from 2 kg of sugarcane stalks were jointly converted into ethanol via separate enzymatic hydrolysis and fermentation (SHF). Results showed that 98% of the cellulose present in the optimally pretreated bagasse was hydrolyzed into glucose after 72-h enzymatic saccharification using commercially available cellulase and β-glucosidase preparations at relatively low enzyme loading. The fermentable sugars in the mixture of the sugar juice and the bagasse hydrolysate were readily converted into 193.5 mL of ethanol by Saccharomyces cerevisiae within 12h, achieving 88% of the theoretical yield from the sugars and cellulose.     

Effect of antioxidant extraction on the enzymatic hydrolysis and bioethanol production of the extracted steam-exploded sugarcane bagasse

Ethyl acetate extraction (EAE) of the steam exploded sugarcane bagasse may be an effective and economic way to extract antioxidants as well as enhance the enzymatic hydrolysis and bioethanol yield from the extracted residue. Therefore, the effects of EAE on steam-exploded sugarcane bagasse (SESB) were studied. Under boiling solvent extraction (BSE), the efficiency of EAE for obtaining phenolics from SESB was approximately 20%. EA extracts obtained under BSE showed an H₂O₂ scavenging activity (210 μL) of 99%. The IC₅₀ values for 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity and reducing power of BSE40 were 50.89 and 256.38 μg/mL, respectively, while those of vitamin C were 24 and 112 μg/mL, respectively. EAE improved the glucose yield by 30% but had no significant effect on the xylose yield during the enzymatic hydrolysis obtained using Celluclast 1.5L and Novozym 188. EAE also increased the ethanol yield by 8.78% by employing simultaneous saccharification and fermentation. The present study may be of great importance in industrial bioethanol production from steam-exploded biomass environmentally friendly and economically.     

Enzymatic hydrolysis of sugarcane bagasse and straw mixtures pretreated with diluted acid

Abstract

In Brazil, sugarcane biomass is generated in large amounts. Sugarcane bagasse and straw are considered as an important feedstock for renewable energy and biorefinery. This paper aims to study the generation of monosaccharides (C5 and C6) from sugarcane biomass via processing bagasse or straw and mixtures of both materials (bagasse:straw 3:1, 1:1 and 1:3). Samples were pretreated with sulfuric acid which resulted in approximately 90% of hemicellulose solubilization, corresponding to around 58 g L^{? 1} of xylose. Pretreated straw showed greater susceptibility to enzymatic hydrolysis in comparison to bagasse, as shown by glucose yields of 76% and 65%, respectively, whereas the mixtures showed intermediate yields. Thus, one strategy to balance sugarcane biomass availability and possibly increasing 2G ethanol production would be to use bagasse–straw mixtures in appropriate ratios according to market fluctuations. Untreated and pretreated samples were analyzed using X-ray diffraction, but there was no relationship to enzymatic hydrolysis.     

Enhancement of the enzymatic digestibility of sugarcane bagasse by alkali–peracetic acid pretreatment

The enzymatic digestibility of sugarcane bagasse was greatly increased by alkali (NaOH)–peracetic acid (PAA) pretreatment under mild conditions. The effects of several factors affecting the pretreatment were investigated. It was found that when bagasse was pre-pretreated by 10% (based on initial dry materials) NaOH with 3:1 liquid-to-solid ratio at 90 °C for 1.5 h and further delignified by 10% peracetic acid (based on initial dry materials) at 75 °C for 2.5 h, the yield of reducing sugars reached 92.04% by enzymatic hydrolysis for 120 h with cellulase loading of 15 FPU/g solid. Compared with acid and alkali pretreatment, alkali–PAA pretreatment could be conducted under milder conditions and was more effective for delignification with less carbohydrates being degraded in the pretreatment process. Alkaline stage played an important role for partial delignification, swelling fibers and subsequently reducing PAA loading. No loss of cellulase activity (FPA) was observed in the liquid phase for alkali–PAA pretreated bagasse after enzymatic hydrolysis for 120 h.     

Enhanced enzymatic hydrolysis of sugarcane bagasse by N-methylmorpholine-N-oxide pretreatment

The cellulose dissolution solvent used in Lyocell process for cellulose fiber preparation, N-methylmorpholine-N-oxide (NMMO) monohydrate, was demonstrated to be an effective agent for sugarcane bagasse pretreatment. Bagasse of 20wt% was readily dissolved in NMMO monohydrate at 130 degrees C within 1h. After dissolution, bagasse could be regenerated by rapid precipitation with water as a porous and amorphous mixture of its original components. The regenerated bagasse exhibited a significant enhancement on enzymatic hydrolysis kinetic. Not only the reducing sugars releasing rate but also hydrolysis yield was enhanced at least twofold as compared with that of untreated bagasse. The cellulose fraction of regenerated bagasse was nearly hydrolyzed to glucose after 72h hydrolysis with Cellulase AP3. The recycled NMMO demonstrated the same performance as the fresh one on bagasse pretreatment for hydrolysis enhancement. The regenerated bagasse was directly used in simultaneous saccharification and fermentation (SSF) for ethanol production by Zymomonas mobilis. No negative effect on ethanol fermentation was observed and ethanol yield approximately 0.15 g ethanol/g baggasse was achieved.     

Pretreatment of sugarcane bagasse using supercritical carbon dioxide combined with ultrasound to improve the enzymatic hydrolysis

This work evaluates the pretreatment of sugarcane bagasse combining supercritical carbon dioxide (SC-CO₂) and ultrasound to enhance the enzymatic hydrolysis of pretreated bagasse. In a first step the influence of process variables on the SC-CO₂ pretreatment to enhance the enzymatic hydrolysis was evaluated by mean of a Plackett–Burmann design. Then, the sequential treatment combining ultrasound + SC-CO₂ was evaluated. Results show that treatment using SC-CO₂ increased the amount of fermentable sugar obtained of about 280% compared with the non-treated bagasse, leading to a hydrolysis efficiency (based on the amount of cellulose) as high as 74.2%. Combining ultrasound + SC-CO₂ treatment increased about 16% the amount of fermentable sugar obtained by enzymatic hydrolysis in comparison with the treatment using only ultrasound. From the results presented in this work it can be concluded that the combined ultrasound + SC-CO₂ treatment is an efficient and promising alternative to carry out the pretreatment of lignocellulosic feedstock at relatively low temperatures without the use of hazardous solvents.     

Optimization of steam explosion as a method for increasing susceptibility of sugarcane bagasse to enzymatic saccharification

The technique of autohydrolysis steam explosion was examined as a means for pretreatment of sugarcane bagasse. Treatment conditions were optimized so that following enzymatic hydrolysis, pretreated bagasse would give 65.1 g sugars/100 g starting bagasse. Released sugars comprised 38.9 g glucose, 0.6 g cellobiose, 22.1 g xylose, and 3.5 g arabinose, and were equivalent to 83% of the anhydroglucan and 84% of the anhydroxylan content of untreated bagasse. Optimum conditions were treatment for 30 S with saturated steam at 220 degrees C with a water-to-solids ratio of 2 and the addition of 1 g H(2)SO(4)/100 g dry bagasse. Bagasse treated in this manner was not inhibitory to fermentation by Saccharomyces uvarum except at low inoculum levels when fermentation time was extended by up to 24 h. Pretreated saccharified bagasse was inhibitory to Pachysolen tannophilus and this was attributed to the formation of acetate from the hydrolysis of acetyl groups present in hemicellulose. The major advantage of the pretreatment is the achievement of high total sugar yield with moderate enzyme requirement and only minor losses due to sugar decomposition.     

A study on the pretreatment of a sugarcane bagasse sample with dilute sulfuric acid

Experiments based on a 2³ central composite full factorial design were carried out in 200-ml stainless-steel containers to study the pretreatment, with dilute sulfuric acid, of a sugarcane bagasse sample obtained from a local sugar–alcohol mill. The independent variables selected for study were temperature, varied from 112.5°C to 157.5°C, residence time, varied from 5.0 to 35.0 min, and sulfuric acid concentration, varied from 0.0% to 3.0% (w/v). Bagasse loading of 15% (w/w) was used in all experiments. Statistical analysis of the experimental results showed that all three independent variables significantly influenced the response variables, namely the bagasse solubilization, efficiency of xylose recovery in the hemicellulosic hydrolysate, efficiency of cellulose enzymatic saccharification, and percentages of cellulose, hemicellulose, and lignin in the pretreated solids. Temperature was the factor that influenced the response variables the most, followed by acid concentration and residence time, in that order. Although harsher pretreatment conditions promoted almost complete removal of the hemicellulosic fraction, the amount of xylose recovered in the hemicellulosic hydrolysate did not exceed 61.8% of the maximum theoretical value. Cellulose enzymatic saccharification was favored by more efficient removal of hemicellulose during the pretreatment. However, detoxification of the hemicellulosic hydrolysate was necessary for better bioconversion of the sugars to ethanol.     

Utilization of sugarcane bagasse for bioethanol production: sono-assisted acid hydrolysis approach

In this study, the production of sugar monomers from sugarcane bagasse (SCB) by sono-assisted acid hydrolysis was performed. The SCB was subjected to sono-assisted alkaline pretreatment. The cellulose and hemicellulose recovery observed in the solid content was 99% and 78.95%, respectively and lignin removal observed during the pretreatment was about 75.44%. The solid content obtained was subjected to sono-assisted acid hydrolysis. Under optimized conditions, the maximum hexose and pentose yield observed was 69.06% and 81.35% of theoretical yield, respectively. The hydrolysate obtained was found to contain very less inhibitors, which improved the bioethanol production and the ethanol yield observed was 0.17 g/g of pretreated SCB.     

Xylanase production by endophytic Aspergillus niger using pentose-rich hydrothermal liquor from sugarcane bagasse

Fungal xylanases have been widely studied and various production methods have been proposed using submerged and solid-state fermentation. This class of enzyme is used to supplement cellulolytic enzyme cocktails in order to enhance the enzymatic hydrolysis of plant cell walls. The present work investigates the production of xylanase and other accessory enzymes by a recently isolated endophytic Aspergillus niger DR02 strain, using the pentose-rich liquor from hydrothermal pretreatment of sugarcane bagasse as carbon source. Batch and fed-batch submerged cultivation approaches were developed in order to minimize the toxicity of the liquor and increase enzyme production. Maximum xylanase activities obtained were 458.1 U/mL for constant fed-batch, 428.1 U/mL for exponential fed-batch, and 264.37 U/mL for pulsed fed-batch modes. The results indicated that carbon-limited fed-batch cultivation can reduce fungal catabolite repression, as well as overcome possible negative effects of toxic compounds present in the pentose-rich liquor. Enzymatic panel and mass spectrometric analyses of the fed-batch A. niger secretome showed high levels of xylanolytic enzymes (GH10, GH11, and GH62 Cazy families), together with cellobiohydrolase (G6 and GH7), β-glucosidase, β-xylosidase (GH3), and feruloyl esterase (CE1) accessory enzyme activities. The yields of glucose and xylose from enzymatic hydrolysis of hydrothermally pretreated sugarcane bagasse increased by 43.7 and 65.3%, respectively, when a commercial cellulase preparation was supplemented with the A. niger DR02 constant fed-batch enzyme complex.     

The effect of biomass moisture content on bioethanol yields from steam pretreated switchgrass and sugarcane bagasse

This study aimed to determine the effect of moisture content of three different feedstocks on overall ethanol yield. Switchgrass and sugarcane bagasse from two sources were either soaked in water (∼80% moisture) or left dry (∼12% moisture), and half each of these were impregnated with 3% w/w SO₂ and all were steam pretreated. The twelve resulting substrates were compared based on overall sugar recovery after pretreatment, cellulose conversion following enzymatic hydrolysis, and ethanol yield following simultaneous saccharification and fermentation. The overall ethanol yield after simultaneous saccharification and fermentation of hexoses was 18-28% higher in samples that were soaked prior to SO₂ addition than in SO₂-catalyzed samples that were not soaked. In samples that were uncatalyzed, soaking made little difference, indicating that the positive effect of increased moisture content may be related to increased permeability of the biomass to SO₂.