Direct electrochemistry of cytochrome c at ordered macroporous active carbon electrode

Three-dimensionally (3D) ordered macroporous active carbon has been fabricated and used as electrode substrate for the direct electrochemistry of horse heart cytochrome c (Cyt c). The Cyt c immobilized on the surface of the ordered macroporous active carbon shows a pair of well-defined and nearly reversible redox waves at the formal potential of −0.033 V in pH 6.8 phosphate buffer solution. The interaction between Cyt c and the 3D macroporous active carbon makes the formal potential shift negatively compared to that of Cyt c in solution. Spectrophotometric and electrochemical methods have been used to investigate the interaction between Cyt c and the porous active carbon. The immobilized Cyt c maintains its biological activity, and shows a surface controlled electrode process with the electron-transfer rate constant (k_s) of 17.6 s⁻¹ and the charge-transfer coefficient (a) of 0.52, and displays the features of a peroxidase in the electrocatalytic reduction of hydrogen peroxide (H₂O₂). A potential application of the Cyt c-immobilized porous carbon electrode as a biosensor to monitor H₂O₂ has been investigated. The steady-state current response increases linearly with H₂O₂ concentration from 2.0 × 10⁻⁵ to 2.4 × 10⁻⁴ mol l⁻¹. The detection limit (3σ) for determination of H₂O₂ has been found to be 1.46 × 10⁻⁵ mol l⁻¹.     

Electrochemical quartz crystal impedance study on the overoxidation of polypyrrole-carbon nanotubes composite film for amperometric detection of dopamine

The electrochemical quartz crystal impedance (EQCI) method was used to study the overoxidation of polypyrrole (PPy)–multiwalled carbon nanotubes (MWCNT) nanocomposite film in neutral and alkaline solutions. The values of molar mass per electron transferred (M/n) obtained during the overoxidation of PPy in 0.10 mol L⁻¹ Na₂SO₄ and 0.20 mol L⁻¹ NaOH aqueous solutions were estimated to be ca. 17 and 22 g mol⁻¹, respectively, suggesting the nucleophilic attack of solution OH⁻ to the pyrrole units during the overoxidation, and the possible partial formation of carboxylic groups after the overoxidation in the NaOH solution. Also, the overoxidized PPy–MWCNT composite film prepared in the NaOH solution showed a notably larger affinity to dopamine (DA) dissolved in a neutral phosphate buffer than that prepared in the Na₂SO₄ solution. The modification of the overoxidized nanocomposite film improved substantially the sensitivity for DA assay in a neutral phosphate buffer, as compared with the modification of overoxidized PPy or MWCNT alone. At a −6 kHz (201-nm thickness) nanocomposite film prepared in a polymerization bath containing 1.0 mg mL⁻¹ MWCNT and overoxidized in 0.20 mol L⁻¹ aqueous NaOH, the peak current response from differential pulse voltammetric assay of DA was linear with DA concentration from 4.0 × 10⁻⁸ to 1.4 × 10⁻⁶ mol L⁻¹, with a lower limit of detection of 1.7 nmol L⁻¹, good anti-interferent ability, as well as good stability and reproducibility.     

Graft copolymerization of acrylic acid onto guar gum initiated by vanadium (V)–mercaptosuccinic acid redox pair

Guar gum has been modified by graft copolymerization with acrylic acid in aqueous medium using vanadium (V)–mercaptosuccinic acid redox system. The optimum reaction conditions affording maximum grafting ratio, efficiency, add on and conversion have been determined. The grafting parameters have been found to increase with increase in vanadium (V) concentration upto 1.0 × 10⁻² mol dm⁻³, but these parameters decrease on further increasing the vanadium (V) concentration. On increasing the mercaptosuccinic acid concentration from 1.0 × 10⁻² to 4.0 × 10⁻² mol dm⁻³ grafting ratio, efficiency and add on increase up to 2.0 × 10⁻² mol dm⁻³ but decrease with further increase in mercaptosuccinic acid concentration. On varying the acrylic acid concentration from 5.0 × 10⁻² to 30.0 × 10⁻² mol dm⁻³, maximum grafting ratio, efficiency and add on have been obtained at 20.0 × 10⁻² mol dm⁻³. The grafting ratio, add on and conversion increase, on increasing the H⁺ ion concentration from 1.5 × 10⁻¹ to 6.0 × 10⁻¹ mol dm⁻³. On increasing the guar gum concentration the grafting parameters increase. The grafting ratio, add on and conversion have been found to increase with time period while efficiency started decreasing after 120 min. It has been observed that %G increases on increasing the temperature up to 35 °C. The graft copolymer has been characterized by IR spectroscopy and thermogravimetric analysis.     

Synthesis of graft copolymer (k-carrageenan-g-N,N-dimethylacrylamide) and studies of metal ion uptake, swelling capacity and flocculation properties

Graft copolymer of k-carrageenan and N,N-dimethylacrylamide has been synthesized by free radical polymerization using peroxymonosulphate/glycolic acid redox pair in an inert atmosphere. The grafting parameters i.e. grafting ratio, add on and efficiency decrease with increase in concentration of k-carrageenan from 0.6 to 1.4 g dm⁻³ and hydrogen ion from 3 × 10⁻³ to 7 × 10⁻³ mol dm⁻³, but these grafting parameters increase with increase in concentration of N,N-dimethylacrylamide from 16 × 10⁻² to 32 × 10⁻² mol dm⁻³, and peroxymonosulphate from 0.8 × 10⁻² to 2.4 × 10⁻² mol dm⁻³. The metal ion sorption, swelling behaviour and flocculation properties have been studied. The intrinsic viscosity of pure and grafted samples has been measured by using Ubbelohde capillary viscometer. Flocculation capability of k-carrageenan and k-carrageenan-g-N,N-dimethylacrylamide for both coking and non-coking coals has been studied for the treatment of coal mine waste water. The graft copolymer has been characterized by Infrared (IR) spectroscopy and thermogravimetric analysis.     

Hydrodynamic properties of the fractions of mannan formed by Rhodotorula rubra yeast

Aqueous solutions of fractions of an extracellular linear mannan formed by Rhodotorula rubra yeast have been investigated by hydrodynamic methods (high-speed sedimentation, translation isothermic diffusion and viscometry). The molecular weight was determined according to Svedberg ( ) and the polydispersity parameters of the initial sample were also determined (M_w/M_n = 1·20 and M_z/M_w = 1·21). Relationships between the molecular weight (M) and s_o, D_o and [η] in the range were: [η] = 2·33 × 10⁻² M^0.75, D_o = 1·65 × 10⁻⁴ M^0·58, s_o = 2·24 × 10⁻¹⁵ M^0·43. The equilibrium rigidity and hydrodynamic diameter of chains representing mannan molecules were evaluated.     

Studies on the molecular chain morphology of konjac glucomannan

The chain geometry and parameters of konjac glucomannan were studied by using laser light scatter (LLS), gel permeation chromatography (GPC) and viscosimetry. The weight-average molecular weight (M_w), root-mean-square ratio of gyration (S^21/2), second viral coefficient (A₂) and polydispersity index (M_w/M_n) were 1.036×10⁶, 105±0.9 nm, (−1.587±0.283)×10⁻³  mol ml g⁻² and 1.015±0.003 respectively. Mark-Houwink equation was established as , and the molecular chain parameters were as follows: M_L=982.82 nm⁻¹, q=27.93 nm, d=0.74 nm, h=0.26 nm, L=1054.11 nm. To confirm the above results, konjac glucomannan was observed by using atomic force microscopy (AFM) and transmission electron microscope (TEM). The physical image showed directly that the konjac glucomannan molecule was an extending semi-flexible linear chain without branches, and than the molecular dimension also conformed to the parameters above. Therefore the image of molecular chain geometry confirmed the deduction drawn by Mark-Houwink equation and molecular chain parameters magnificently.     

Structure of 7S seed globulin from Phaseolus vulgaris L. in solution

The structure of the 7S globulin from Phaseoulus vulgaris L in dilatue solutions has been studied by small angle X-ray scattering (SAXS), by quasi-elastic light scattering (Q ELS), by circular dichroism spectroscopy (c.d.), and by precise density measurements. The molar mass, the radius of gyration, the volume, the maximum dimension and the diffusion coefficient were determined as M = 1.45 × 10⁵ g mol⁻¹, R_G = 4.05 nm, V = 300- nm³, L = 13.0 nm and D_20,w⁰ = 4.5 × 10⁻⁷ cm² s⁻¹, respectively. The molecule has an asymmetrical shape with the dimensions 12.5 × 12.5 × 3.75 nm. The secondary structure of the 7S globulin is characterized by a small portion of -helical structure (14%) and a marked content of β-structure (18%).     

Bradykinin dilates rat middle cerebral artery and its large branches via endothelial B2 receptors and release of nitric oxide

Ring segments of rat middle cerebral artery (MCA) were prepared for measurement of isometric force and precontracted with 10⁻⁴ M uridine triphosphate (UTP). Concentration-effect curves (CEC) were constructed for bradykinin (BK, 10⁻⁸–10⁻⁵ M) in segments with functionally intect (E+) or denuded (E−) endothelium. E− segments did not dilate to BK. The BK receptor was characterized by application of specific B₁ or B₂ antagonists [des-Arg⁹-Leu⁸] BK (10⁻⁵ M) and [ -Arg⁰-Hyp³-Thi⁵- -Tic⁷-Oic⁸] BK (HOE140,3 × 10⁻⁷ M), respectively, or B₁ agonist [des-Arg⁹] BK (10⁻⁸–10⁻⁴ M). Involvement of nitric oxide (NO) was tested with N^G-nitro- -arginine (LNNA, 10⁻⁴ M). BK induced concentration-dependent relaxation with a maximal effect (E_max) of 40.86 ± 1.50% at 10⁻⁶ M and a pD₂ (−log₁₀ EC₅₀) of 6.818 ± 0.044. This relaxation could be prevented with HOE140 or LNNA, but was not influenced by [des-Arg⁹-Leu⁸] BK. [des-Arg⁹] BK did not induce any effect. These results demonstrate that BK induced relaxation via endothelial B₂ receptors and release of NO in isolated rat MCA.     

The hydrodynamic characterization of waxy maize amylopectin in 90% dimethyl sulfoxide–water by analytical ultracentrifugation, dynamic, and static light scattering

Static light scattering of high amylopectin waxy maize starch gently dispersed in 90% dimethyl sulfoxide–water yielded a weight average molecular weight M_w and radius of gyration R_g of 560×10⁶ g/mol and 342 nm, respectively. To obtain an independent hydrodynamic characterization of these solutions, we measured the sedimentation coefficient for the main component in an analytical ultracentrifuge. The value of s⁰, the infinite dilution sedimentation coefficient, was 199 S. The translational diffusion coefficient D⁰ in very dilute solutions was measured by dynamic light scattering at 90° and found to be 2.33×10⁻⁹ cm²/s. An effective hydrodynamic radius R_h was calculated from this diffusion constant using the Stokes–Einstein equation and found to be 348 nm. The structure-related parameter ρ=R_g/R_h was calculated to be 0.98. The weight average molecular weight calculated from the Svedberg equation using the values measured for s⁰ and D⁰ was 593×10⁶ g/mol. This result is in reasonable agreement with the light scattering results. As light scattering results are subject to experimental errors due to the possibility of dust contamination, the presence of microgel or aggregates, and the questionable applicability of light scattering theory to interpret results for macromolecular sizes approaching the wave length of light used as a source for scattering, it is advisable to have corroborating hydrodynamic data when possible to further validate light scattering results in this very high molecular weight range.     

Optimizing the formulation of a myoglobin molecularly imprinted thin-film polymer--formed using a micro-contact imprinting method

Thin-film myoglobin molecularly imprinted polymers have been fabricated using a micro-contact approach. By initially selecting the cross-linker on the basis of it having a minimal recognition for the template and using this as a starting point for functional monomer selection, we have produced myoglobin imprinted polymers with exceptionally high selectivities.

The affinity of the polymers, for myoglobin, when prepared with a variety of different cross-linkers and no functional monomer was evaluated. Of these, tetraethylene glycol dimethacrylate (TEGDMA) exhibited the lowest affinity for the template species. Methyl methacrylate (MMA) was chosen as the functional monomer as when it was used in conjunction with TEGDMA, it exhibited maximum selectivity for the template compared to polymers made with other functional monomers.

With a MMA to TEGDMA ratio of 1 to 3, the myoglobin molecularly imprinted polymer adsorbed 15.03 ± 0.89 × 10⁻¹¹ mole/cm² of template from a 5.68 × 10⁻⁷ M myoglobin solution, compared to 2.58 ± 0.02 × 10⁻¹¹ mole/cm² for a polymer of similar composition, but formed in the absence of a template. Various washing conditions, using alkaline media to remove the template, were investigated. An extraction solvent comprising 2 wt.% SDS and 0.6 wt.% NaOH used at 80 °C for 30 min was shown to give the highest imprinting factor i.e. 5.83 with 72.82% myoglobin removal.

The saturation kinetics of template binding to the thin-film MIP were examined and found to display a simple two-phase profile typical of non-cooperative binding. A Scatchard binding plot showed the dissociation constant (K_d) for the specific binding phase to be 3.4 × 10⁻⁷ M and the binding site capacity to be 7.24 × 10⁻¹¹ mole/cm². For the non-specific binding phase, K_d was found to be 1.355 × 10⁻⁵ M and the binding site capacity was determined as 9.62 × 10⁻¹⁰ mole/cm².

Selectivity experiments were carried out in both single protein and binary protein systems all using a total protein concentration of 5.68 × 10⁻⁷ M. The molar ratio of adsorbed myoglobin to IgG, HSA and hemoglobin was found to 115.5, 230.9 and 2.5, respectively. While, in binary competition systems, myoglobin selectivity to IgG, HSA and hemoglobin was, respectively, 94.18, 98.21 and 61.09%. Rebinding in natural biological matrices, i.e. human serum or urine, showed the imprinted films to have significantly greater uptake than non-imprinted films. Re-binding in undiluted urine was found to be a facile process, with the imprinting factor, i.e. the ratio of MIP to NIP binding, being determined as 37.4.     

Epinephrine quantification in pharmaceutical formulations utilizing plant tissue biosensors

A plant tissue biosensor associated with flow injection analysis is proposed to determine epinephrine in pharmaceutical samples. The polyphenol oxidase enzymes present in the fibers of a palm tree fruits (Livistona chinensis), catalyses the oxidation of epinephrine to epinephrinequinone as a primary product. This product is then electrochemically reduced (at −0.10 V versus Ag/AgCl_sat) on the biosensor surface and the resulting current is used for the quantification of epinephrine. The biosensor provides a linear response for epinephrine in the concentration range from 5.0 × 10⁻⁵ to 3.5 × 10⁻⁴ mol l⁻¹. The limit of detection estimated for this interval was 1.5 × 10⁻⁵ mol l⁻¹ and the correlation coefficient of 0.998, working under a flow rate of 2.0 ml min⁻¹ and using a sample loop of 100 μl. The repeatability (R.S.D. for 10 consecutive determinations of a 3.0 × 10⁻⁴ mol l⁻¹ epinephrine solution) was 3.1%. The results obtained by the method here proposed were compared with the official UV spectrophotometric procedure and also using a plant tissue reactor. The responses obtained with the proposed strategies were in good agreement with both ways of analyses, whereas the values obtained by the official spectrophotometric method was strongly affected by benzoic acid, present in the formulation of pharmaceutical product utilized for inhalation. Such favorable results obtained with the carbon paste biosensor or utilizing the bioreactor, joined with the simplicity of its preparation turns these procedures very attractive for epinephrine quantification in pharmaceutical products.     

Monovalent copper as a potential catalyst for formation of acetaldehyde via the migration of methyl radicals to the coordinated carbonyl in the complex (CO)Cu-CH3

Cu_aq⁺ forms stable complexes with carbon monoxide in aqueous solutions. Furthermore it reacts very fast with aliphatic radicals. The reaction of Cu(CO)_maq⁺ with methyl radicals, ^•CH₃ was studied using the pulse-radiolysis technique. The results point out that methyl radicals react with Cu(CO)_aq⁺ to form an unstable intermediate with a Cu^II-C σ bond identified as (CO)Cu^II-CH₃⁺, k = (1.1±0.2) × 10⁹ M⁻¹ s⁻¹. This intermediate has a strong LMCT charge transfer band (λ_max = 385 nm, _max = 2500 M⁻¹ cm⁻¹) which is similar to the absorption bands of other transient complexes with Cu^II-alkyl σ bonds. The coordinated carbon monoxide in (CO)Cu^II-CH₃⁺ inserts into the copper—carbon bond (or rather the coordinated methyl migrates to the coordinated carbon monoxide ligand) at a rate of (3.0±0.8) × 10² s⁻¹ to form the copperacetyl complex (CO)_mCu^II-C(CH₃)=O⁺ (λ_max = 480 nm, _max = 2100 M⁻¹ cm⁻¹). The rate of formation of (CO)Cu^II-CH₃⁺ and of the insertion reaction are pH independent. The complex (CO)_mCu^II-C(CH₃)=O⁺ is also unstable and decomposes heterolytically to yield acetaldehyde and Cu_aq²⁺ as the final stable products. This reaction is slightly pH dependent. The same reactivity pattern has been observed for the Cu(CO_naq⁺ complexes (n = 2 or 3). The results clearly point out that CO remains coordinated to transient complexes of the type Cu^II-alkyl.     

A performance comparison of choline biosensors: anodic or cathodic detections of H2O2 generated by enzyme immobilized on a conducting polymer

Amperometric choline biosensors were fabricated by the covalent immobilization of an enzyme of choline oxidase (ChO) and a bi-enzyme of ChO/horseradish peroxidase (ChO/HRP) onto poly-5,2′:5′,2″-terthiophene-3′-carboxylic acid (poly-TTCA) modified electrodes (CPMEs). A sensor modified with ChO utilized the oxidation process of enzymatically generated H₂O₂ in a choline solution at +0.6 V. The other one modified with ChO/HRP utilized the reduction process of H₂O₂ in a choline solution at −0.2 V. Experimental parameters affecting the sensitivity of sensors, such as pH, applied potential, and temperature were optimized. A performance comparison of two sensors showed that one based on ChO/HRP/CPME had a linear range from 1.0×10⁻⁶ to 8.0×10⁻⁵ M and the other based on ChO/CPME from 1.0×10⁻⁶ to 5.0×10⁻⁵ M. The detection limits for choline employing ChO/HRP/CPME and ChO/CPME were determined to be about 1.0×10⁻⁷ and 4.0×10⁻⁷ M, respectively. The response time of sensors was less than 5 s. Sensors showed good selectivity to interfering species. The long-term storage stability of the sensor based on ChO/HRP/CPME was longer than that based on ChO/CPME.     

Enhancement of growth and gymnodimine production by the marine dinoflagellate, Karenia selliformis

Because of its novel bioactive properties the production of gymnodimine for use as a pharmaceutical precursor has aroused interest. The dinoflagellate, Karenia selliformis produces gymnodimine when grown in bulk culture using GP + selenium medium but the growth rates (μ) and levels of gymnodimine are low (μ, 0.05 days⁻¹; gymnodimine 250 μg L⁻¹ max). We describe the effects of organic acid additions (acetate, glycolate, alanine and glutamate additions and combinations of these) in enhancing growth and gymnodimine production in axenic cultures. The most effective organic acid combinations in decreasing order were: glycolate/alanine > acetate > glycolate. Glycolate/alanine optimised gymnodimine production by prolonging growth (maximum cell yield, 1.76 × 10⁵ cells mL⁻¹; gymnodimine, 1260 μg L⁻¹; growth rate (μ), 0.2 days⁻¹) compared to the control (growth maximum cell yield, 7.8 × 10⁴ cells mL⁻¹; gymnodimine, 780 μg L⁻¹; μ, 0.17 days⁻¹). Acetate enhanced gymnodimine by stimulating growth rate (μ, 0.23 days⁻¹) and the large concentration of gymnodimine per cell (16 pg cell⁻¹ cf. 9.8 pg cell⁻¹ for the control) suggests a role for this compound in gymnodimine biosynthesis. Amending culture media with Mn²⁺ additions resulted in slightly decreased growth in control cultures and increased the gymnodimine while in glycolate/alanine cultures growth was stimulated but gymnodimine production decreased. The results suggest that the organic acid can enhance gymnodimine production by either enhancing growth maximum or the biosynthetic pathway.     

Preparation and anticoagulant activity of a low-molecular-weight sulfated chitosan

Synthesis of chitosan sulfates with low molecular weight (M_v 9000–35,000 Da) was carried out by sulfation of low molecular weight chitosan (M_v 10,000–50,000 Da). The oleum was used as sulfating agent and dimethylfornamide as medium. The chitosans were prepared by enzymatic and acidic hydrolysis of initial high molecular weight chitosan as well as by extrusion solid-state deacetylation of chitin. As was shown by FT-IR and NMR-methods and elemental analysis, the sulfation occurred at C-6 and C-3 positions and substitution degree is 1.10–1.63. The molecular weight sulfated chitosan was determined by viscometric method and the Mark–Houwink equation [η]=10⁻⁵ 4.97 M^0.77. Study of anticoagulant activity showed that chitosan sulfates with lowered molecular weight demonstrated a regular increase of anti-Xa activity like heparins.     

A method for the design of 3D scaffolds for high-density cell attachment and determination of optimum perfusion culture conditions

The application of in vitro cultured cells in tissue engineering or drug screening, aimed at complex soft tissues such as liver, requires in vivo physiological function of the cultured cells. For this purpose, the scaffold in which cells are cultured should provide a microenvironment similar to an in vivo one with a three-dimensional extracellular matrix, a high supply capacity of O₂ and nutrients, and high cell density. In this paper, we propose a method to design (1) the geometry of the scaffold, with a surface/volume ratio optimized to allow high-density (5×10⁷ cells/mL) cell culture and (2) culture conditions that will supply optimal quantities of oxygen and nutrients. CFD modeling of mass transport was used to determine the shear stress as well as O₂ and glucose metabolism in the scaffold (20 mm width–35 mm length) for various flow rates. Validation of the model was done through comparison with flow resistance and micro-PIV experiments. CFD analysis showed the maximum metabolic rate densities for this scaffold are 6.04×10⁻³ mol/s/m³ for O₂ at 0.71 mL/min and 1.91×10⁻² mol/s/m³ for glucose at 0.35 mL/min.     

Effects of interactions with micellar interfaces on the activity and structure of different lipolytic isoenzymes from Candida rugosa

The conformational and functional changes of cholesterol esterase (CE) and isolipase (CRL) from Candida rugosa after exposure to a micellar interface and subsequent extraction to a fresh buffer were studied. These two enzymes were activated by interaction with the micellar interface of a sulphosuccinic acid bis[2-ethylhexyl] ester/n-heptane/water system. For the hydrolysis of p-nitrophenyl butyrate ester in water, the catalytic efficiencies of CE and CRL were both improved because on activation their k_cat values increased from 378 to 465 and from 250 to 680 s⁻¹, respectively, while their K_m values decreased from 5.08 × 10⁻⁵ to 3.23 × 10⁻⁵ and from 2.28 × 10⁻⁴ to 1.14 × 10⁻⁴ M, respectively. After exposure to the micelles, CE showed a marked increase in its -helical content from 28 to 49%, but only limited changes were detected when CRL was exposed. These proteins exhibit similar capacities for increasing their -helical content in a helicogenic medium. In acetonitrile/water mixtures, CRL exhibits a partial decrease in the extent of its secondary structure, while CE exhibits an increase in its -helical content. The fact that this medium of reduced polarity permits one to simulate the effect of the AOT reverse micelles on the conformation of CE (increased helicity) but not their effect on the structure of CRL (decreased helicity) supports the hypothesis that only CE interacts to a significant extent with the apolar side of the micellar interface. After exposure to micelles of octyl-β-glucopyranoside, CE (but not CRL) showed a 10% increase in its -helical content.     

Effect of nomegestrol acetate on estrone-sulfatase and 17β-hydroxysteroid dehydrogenase activities in human breast cancer cells

It is well recognized that estradiol (E₂) is one of the most important hormones supporting the growth and evolution of breast cancer. Consequently, to block this hormone before it enters the cancer cell or in the cell itself, has been one of the main targets in recent years. In the present study we explored the effect of the progestin, nomegestrol acetate, on the estrone sulfatase and 17β-hydroxy-steroid dehydrogenase (17β-HSD) activities of MCF-7 and T-47D human breast cancer cells. Using physiological doses of estrone sulfate (E₁S: 5 × 10⁻⁹ M), nomegestrol acetate blocked very significantly the conversion of E₁S to E₂. In the MCF-7 cells, using concentrations of 5 × 10⁻⁶ M and 5 × 10⁻⁵ M of nomegestrol acetate, the decrease of E₁S to E₂ was, respectively, −43% and −77%. The values were, respectively, −60% and −71% for the T-47D cells. Using E₁S at 2 × 10⁻⁶ M and nomegestrol acetate at 10⁻⁵ M, a direct inhibitory effect on the enzyme of −36% and −18% was obtained with the cell homogenate of the MCF-7 and T-47D cells, respectively. In another series of studies, it was observed that after 24 h incubation of a physiological concentration of estrone (E₁: 5 × 10⁻⁹ M) this estrogen is converted in a great proportion to E₂. Nomegestrol acetate inhibits this transformation by −35% and −85% at 5 × 10⁻⁷ M and 5 × 10⁻⁵ M, respectively in T-47D cells; whereas in the MCF-7 cells the inhibitory effect is only significant, −48%, at 5 × 10⁻⁵ M concentration of nomegestrol acetate. It is concluded that nomegestrol acetate in the hormone-dependent MCF-7 and T-47D breast cancer cells significantly inhibits the estrone sulfatase and 17β-HSD activities which converts E₁S to the biologically active estrogen estradiol. This inhibition provoked by this progestin on the enzymes involved in the biosynthesis of E₂ can open new clinical possibilities in breast cancer therapy.     

Comparison of the characterization on binding of alpinetin and cardamonin to lysozyme by spectroscopic methods

Studies on the binding affinity of protein to the active components of herbs are novel in biochemistry and are valuable for the information about speciation of drugs and exchange in biological systems. Alpinetin and cardamonin, two of the main constituents from the seeds of Alpinia katsumadai Hayata, have been used in traditional herbs as antibacterial, anti-inflammatory, and other important therapeutic activities of significant potency and low systemic toxicity. The interactions between two flavonoids analogs and lysozyme have been studied for the first time by spectroscopic method including Fourier transform infrared (FT-IR) spectroscopy, circular dichroism (CD) and UV-absorption spectroscopy in combination with Fluorescence quenching study. Both molecules showed high affinities to lysozyme under the experimental condition with drug concentrations from 3.33 × 10⁻⁶ to 2.67 × 10⁻⁵ mol L⁻¹ for alpinetin and 1.67 × 10⁻⁶ to 13.33 × 10⁻⁶ mol L⁻¹ for cardamonin. The alterations of protein secondary structure in the presence of drugs in aqueous solution were quantitatively estimated by the evidences from CD and FT-IR spectroscopy. The thermodynamic parameters obtained and the results of spectroscopic measurements suggest that hydrophobic and electrostatic interactions are the predominant intermolecular forces stabilizing two coordination compounds. The quenching mechanism and the number of binding site (n ≈ 1) were obtained by fluorescence titration data. The efficiency of energy transfer provided the binding distances of 4.04 and 5.90 nm for alpinetin-LYSO and cardamonin-LYSO systems, respectively.     

Binding of genistein to human serum albumin demonstrated using tryptophan fluorescence quenching

Genistein is an isoflavone and phytoestrogen that is a potent inhibitor of cell proliferation and angiogenesis. This study was designed to investigate the binding of genistein to human serum albumin (HSA) under physiological conditions with drug concentrations in the range of 6.7 × 10⁻⁶ to 2.0 × 10⁻⁵ mol L⁻¹ and HSA concentration at 1.5 × 10⁻⁶ mol L⁻¹. Fluorescence quenching methods in combination with Fourier transform infrared (FT-IR) spectroscopy and circular dichroism (CD) spectroscopy was used to determine the binding mode, the binding constant and the protein structure changes in the presence of genistein in aqueous solution. Changes in the CD spectra and FT-IR spectra were observed upon ligand binding, and the degree of tryptophan fluorescence quenching change did significantly in the complexes. These data have proved the change in protein secondary structure accompanying ligand binding. The change in tryptophan fluorescence intensity was used to determine the binding constants. The thermodynamic parameters, the enthalpy change (ΔH) and the entropy change (ΔS) were calculated to be −22.24 kJ mol⁻¹and 19.60 J mol⁻¹ K⁻¹ according to the van’t Hoff equation, which indicated that hydrophobic and electrostatic interactions play the main role in the binding of genistein to HSA.