Distinct structural elements that direct solution aggregation and membrane assembly in the channel-forming peptide M2GlyR

Restoration of chloride conductance via the introduction of an anion selective pore, formed by a channel-forming peptide, has been hypothesized as a novel treatment modality for patients with cystic fibrosis (CF). Delivery of these peptide sequences to airway cells from an aqueous environment in the absence of organic solvents is paramount. New highly soluble COOH- and NH(2)-terminal truncated peptides, derived from the second transmembrane segment of the glycine receptor alpha-subunit (M2GlyR), were generated, with decreasing numbers of amino acid residues. NH(2)-terminal lysyl-adducted truncated peptides with lengths of 22, 25, and 27 amino acid residues are equally able to stimulate short circuit current (I(SC)). Peptides with as few as 16 amino acid residues are able to stimulate I(SC), although to a lesser degree. In contrast, COOH-terminal truncated peptides show greatly reduced induced I(SC) values for all peptides fewer than 27 residues in length and show no measurable activity for peptides fewer than 21 residues in length. CD spectra for both the NH(2)- and COOH-truncated peptides have random structure in aqueous solution, and those sequences that stimulated the highest maximal I(SC) are predominantly helical in 40% trifluoroethanol. Peptides with a decreased propensity to form helical structures in TFE also failed to stimulate I(SC). Palindromic peptide sequences based on both the NH(2)- and COOH-terminal halves of M2GlyR were synthesized to test roles of the COOH- and NH(2)-terminal halves of the molecule in solution aggregation and channel forming ability. On the basis of the study presented here, there are distinct, nonoverlapping regions of the M2GlyR sequence that define solution aggregation and membrane channel assembly. Peptides that eliminate solution aggregation with complete retention of channel forming activity were generated.     

Solution structure of humanin, a peptide against Alzheimer's disease-related neurotoxicity

Humanin is a newly identified 24-residue peptide that suppresses neuronal cell death caused by a wide spectrum of familial Alzheimer's disease genes and the beta-amyloid peptide. In this study, NMR and circular dichroism studies of synthetic humanin in aqueous and 30% 2,2,2-trifluoroethanol (TFE) solutions are reported. In aqueous solution, humanin exists predominantly in an unstructured conformation in equilibrium with turn-like structures involving residues Gly5 to Leu10 and Glu15 to Leu18, providing indication of nascent helix. In the less polar environment of 30% TFE, humanin readily adopts helical structure with long-range order spanning residues Gly5 to Leu18. Comparative 3D modeling studies and topology predictions are in qualitative agreement with the experimental findings in both environments. Our studies reveal a flexible peptide in aqueous environment, which is free to interact with possible receptors that mediate its action, but may also acquire a helical conformation necessary for specific interactions and/or passage through membranes.     

Structural implications of placing cationic residues at either the NH2- or COOH-terminus in a pore-forming synthetic peptide

Restoration of chloride conductance via introduction of an anion-selective pore, formed by a channel-forming peptide, has been hypothesized as a novel treatment modality for patients with cystic fibrosis. Delivery of these peptides from an aqueous environment in the absence of organic solvents is paramount. M2GlyR peptides, designed based on the glycine receptor, insert into lipid bilayers and polarized epithelial cells and assemble spontaneously into chloride-conducting pores. Addition of 4 lysine residues to either terminus increases the solubility of M2GlyR peptides. Both orientations of the helix within the membrane form an anion-selective pore, however, differences in solubility, associations and channel-forming activity are observed. To determine how the positioning of the lysine residues affects these properties, structural characteristics of the lysyl-modified peptides were explored utilizing chemical cross-linking, NMR and molecular modeling. Initial model structures of the a-helical peptides predict that lysine residues at the COOH-terminus form a capping structure by folding back to form hydrogen bonds with backbone carbonyl groups and hydroxyl side chains of residues in the helical segment of the peptide. In contrast, lysine residues at the NH2-terminus form fewer H-bonds and extend away from the helical backbone. Results from NMR and chemical cross-linking support the model structures. The C-cap formed by H-bonding of lysine residues is likely to account for the different biophysical properties observed between NH2- and COOH-terminal-modified M2GlyR peptides.     

Formation of a native-like beta-hairpin finger structure of a peptide from the extended PDZ domain of neuronal nitric oxide synthase in aqueous solution.

Neuronal nitric oxide synthase (nNOS) is targeted to the cell membrane via interactions of its extended PDZ domain with PDZ domains of membrane-associated proteins including PSD-95 and alpha1-syntrophin. The formation of heterodimers between the nNOS PDZ domain and the PDZ domains of nNOS-binding proteins requires a stretch of continuous amino-acid residues C-terminal to the canonical nNOS PDZ domain. In this work, we show that a 27-residue peptide comprising the C-terminal extension of the extended nNOS PDZ domain is capable of binding to PSD-95. The structure of the 27-residue peptide in aqueous solution was determined using multidimensional NMR-spectroscopic techniques. The free peptide adopts a native-like beta-hairpin finger structure in aqueous solution. The results indicate that the C-terminal extension peptide of the nNOS PDZ domain may represent a relatively independent structural unit in the mediation of the interaction between nNOS and PDZ domain-containing proteins including PSD-95 and alpha1-syntrophin.     

A helix-turn motif in the C-terminal domain of histone H1

The structural study of peptides belonging to the terminal domains of histone H1 can be considered as a step toward the understanding of the function of H1 in chromatin. The conformational properties of the peptide Ac-EPKRSVAFKKTKKEVKKVATPKK (CH-1), which belongs to the C-terminal domain of histone H1(o) (residues 99-121) and is adjacent to the central globular domain of the protein, were examined by means of 1H-NMR and circular dichroism. In aqueous solution, CH-1 behaved as a mainly unstructured peptide, although turn-like conformations in rapid equilibrium with the unfolded state could be present. Addition of trifluoroethanol resulted in a substantial increase of the helical content. The helical limits, as indicated by (i,i + 3) nuclear Overhauser effect (NOE) cross correlations and significant up-field conformational shifts of the C(alpha) protons, span from Pro100 to Val116, with Glu99 and Ala117 as N- and C-caps. A structure calculation performed on the basis of distance constraints derived from NOE cross peaks in 90% trifluoroethanol confirmed the helical structure of this region. The helical region has a marked amphipathic character, due to the location of all positively charged residues on one face of the helix and all the hydrophobic residues on the opposite face. The peptide has a TPKK motif at the C-terminus, following the alpha-helical region. The observed NOE connectivities suggest that the TPKK sequence adopts a type (I) beta-turn conformation, a sigma-turn conformation or a combination of both, in fast equilibrium with unfolded states. Sequences of the kind (S/T)P(K/R)(K/R) have been proposed as DNA binding motifs. The CH-1 peptide, thus, combines a positively charged amphipathic helix and a turn as potential DNA-binding motifs.     

The membrane-proximal tryptophan-rich region of the HIV glycoprotein, gp41, forms a well-defined helix in dodecylphosphocholine micelles

The membrane-proximal tryptophan-rich region of the HIV transmembrane glycoprotein, gp41, plays an important role in the membrane fusion reaction. Using NMR spectroscopy, we have studied the tertiary structure of a synthetic 19-residue amidated peptide (NH2-KWASLWNWFNITNWLWYIK-CONH2) corresponding to this region in membrane-mimetic environments. Initial experiments in sodium dodecyl sulfate/H2O micelles and trifluoroethanol gave poor results, because of low solubility. However, in dodecylphosphocholine micelles, we obtained excellent 500 and 800 MHz NMR spectra, suggesting that the peptide has a preference for a zwitterionic membrane-like environment. The final NMR structures demonstrated a well-defined helical peptide with a backbone rmsd of 0.47 +/- 0.18 A. Four of the five tryptophan residues, as well as the tyrosine residue, formed a "collar" of aromatic residues along the axial length of the helix. By analogy to related tryptophan-rich antimicrobial peptides, the structure indicates that the aromatic residues of the HIV peptide are positioned within the membrane-water interface of a phospholipid bilayer. This is confirmed by the observation of direct NOEs between the aromatic residues of the peptide to the headgroup and interfacial protons of prototonated dodecylphosphocholine. The bulk of the polar residues are positioned on one face of this structure, with the hydrophobic phenylalanine side chain on the opposing face, forming an amphipathic structure. This work shows that the Trp-rich membrane-proximal region of HIV and related viruses can bind to the surfaces of zwitterioninc membranes in a "Velcro-like" manner.     

Stabilization of helical structure in two 17-residue amphipathic analogues of the C-terminal peptide of cytochrome C

The conformations of two 17-residue peptide analogues derived from the C-terminal sequence of pigeon cytochrome c (native sequence = KAERADLIAYLKQATAK) were examined in aqueous and lipid environments by CD spectroscopy. The two analogues, KKLLKKLIAYLKQATAK (K peptide) and EELLEELIAYLKQATAK (E peptide), were made amphipathic with respect to helical segregation by substituting a 6-residue sequence at the N-terminus of the native peptide. Their structures were compared to the native peptide under aqueous conditions of varying pH and temperature, and in the presence of liposomes composed of phosphatidylcholine and phosphatidylserine in the ratio of 9:1. The results indicated that the native peptide remains unstructured under all the conditions examined even though this region of the native molecule is surface exposed and helical. The E peptide, however, was helical under aqueous conditions at 25 degrees C from pH 2-10 with a maximum helicity at pH 4 (54% helix from analysis of CD data). The ellipticity of the E peptide at pH 4 and 8 was concentration dependent, indicating an aggregation phenomenon. In studies in which the CD spectrum was measured at different temperatures, the E peptide became more helical at lower temperatures at pH 4 but not at pH 8. Upon interaction with a lipid membrane in the form of liposomes, there appeared to be a slight destabilization in the structure of the E peptide. The K peptide in an aqueous environment behaved like the native peptide in that it was structureless at all pHs and temperatures examined. In the presence of liposomes, however, this peptide had a high helical content (75% helix from analysis of CD data). These findings suggest that while stabilization of the helix dipole with negative charges at the N-terminus are important in inducing helical conformation in the E peptide, hydrophobic interactions created during aggregation appear to provide the principal stabilizing force. The results with the K peptide demonstrate that the positive N-terminal sequence of this peptide is able to interact with the negatively charged head groups in the phospholipid membrane in such a fashion as to stabilize a helical structure that is not apparent in an aqueous environment alone.     

Insight into the structures of the second and fifth transmembrane domains of Slc11a1 in membrane mimics

Slc11a1 is an integral membrane protein with 12 putative transmembrane domains and functions as a pH‐coupled divalent metal cation transporter. In the present study, the structures of the peptides corresponding to the second and fifth transmembrane domains of Slc11a1 (from 88 to 109 for TMD2 and from 190 to 215 for TMD5) were determined in membrane‐mimic environments by CD and NMR techniques. It was demonstrated that TMD2 and TMD5 form an α‐helical structure in 30% 2,2,2‐trifluoroethanol (TFE) and 40% hexafluoro‐2‐propanol (HFIP) aqueous solution, respectively. The α‐helix of TMD5 displays a less space‐occupied face consisting of the residues Ala194, Gly197, Thr201, Ala204 and Gly208. The α‐helix is partially unfolded in the N‐terminal region when Gly197 is substituted by Val. The unfolding of the helix in the N‐terminal part and/or increase in volume at the less space‐occupied face of the helix may exert an effect on the arrangement of TMD5 in membrane. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

Solution structure of the osteogenic 1-31 fragment of the human parathyroid hormone

The solution conformations of a selectively osteogenic 1-31 fragment of the human parathyroid hormone (hPTH), hPTH(1-31)NH(2), have been characterized by use of very high field NMR spectroscopy at 800 MHz. The combination of the CalphaH proton and (13)Calpha chemical shifts, (3)J(NH)(alpha) coupling constants, NH proton temperature coefficients, and backbone NOEs reveals that the hPTH(1-31)NH(2) peptide has well-formed helical structures localized in two distinct segments of the polypeptide backbone. There are also many characteristic NOEs defining specific side-chain/backbone and side-chain/side-chain contacts within both helical structures. The solution structure of hPTH(1-31)NH(2) contains a short N-terminal helical segment for residues 3-11, including the helix capping residues 3 and 11 and a long C-terminal helix for residues 16-30. The two helical structures are reinforced by well-defined capping motifs and side-chain packing interactions within and at both ends of these helices. On one face of the C-terminal helix, there are side-chain pairs of Glu22-Arg25, Glu22-Lys26, and Arg25-Gln29 that can form ion-pair and/or hydrogen bonding interactions. On the opposite face of this helix, there are characteristic hydrophobic interactions involving the aromatic side chain of Trp23 packing against the aliphatic side chains of Leu15, Leu24, Lys27, and Leu28. There is also a linear array of hydrophobic residues from Val2, to Leu7, to Leu11 and continuing on to residues His14 and Leu15 in the hinge region and to Trp23 in the C-terminal helix. Capping and hydrophobic interactions at the end of the N-terminal and at the beginning of the C-terminal helix appear to consolidate the helical structures into a V-shaped overall conformation for at least the folded population of the hPTH(1-31)NH(2) peptide. Stabilization of well-folded conformations in this linear 1-31 peptide fragment and possibly other analogues of human PTH may have a significant impact on the biological activities of the PTH peptides in general and specifically for the osteogenic/anabolic activities of bone-building PTH analogues.     

Secondary structure of substance P bound to liposomes in organic solvents and in solution from Raman and CD spectroscopy.

The membrane lipid phase may be an important mediator of the peptide-receptor interaction. In order to understand the mechanism of this interaction, it is important to know the peptide structure, not only in the hydrophobic lipid bilayer environment, but also at the bilayer surface and in solution. To investigate this problem we have measured the secondary structure of the 11-residue neuropeptide substance P (SP) and its fragments in aqueous solutions, in membrane mimetic solvents, and associated with lipid bilayers using Raman and CD spectroscopy. Raman and CD spectra of SP bound to liposomes indicate a less than 20% helix content. We interpret these results to indicate that SP contains virtually no helix when bound to negatively charged liposomes. These spectra are similar to spectra of peptides in type I and III beta-turns. SP forms between 10 and 30% (1-3 residues) helical structure in sodium dodecyl sulfate micelles and less than 10% helix in methanol and trifluoroethanol. The binding of SP to negatively charged liposomes significantly changes the structure of the lipid acyl chains, decreasing order in some cases and increasing it in others. Raman spectra of SP in water indicates that SP near 30 mM forms an ensemble of structures in water that is distinct from completely unfolded peptide and from the aggregated beta-sheet form observed in saline solutions. We conclude from our CD results that methods used to quantitate secondary structure from CD spectra of short peptides cannot be used to distinguish between very short helical segments and beta-turns.     

Solution structure and orientation of the transmembrane anchor domain of the HIV-1-encoded virus protein U by high-resolution and solid-state NMR spectroscopy

The structure of the membrane anchor domain (VpuMA) of the HIV-1-specific accessory protein Vpu has been investigated in solution and in lipid bilayers by homonuclear two-dimensional and solid-state nuclear magnetic resonance spectroscopy, respectively. Simulated annealing calculations, using the nuclear Overhauser enhancement data for the soluble synthetic peptide Vpu1-39 (positions Met-1-Asp-39) in an aqueous 2,2,2-trifluoroethanol (TFE) solution, afford a compact well-defined U-shaped structure comprised of an initial turn (residues 1-6) followed by a linker (7-9) and a short helix on the N-terminal side (10-16) and a further longer helix on the C-terminal side (22-36). The side chains of the two aromatic residues (Trp-22 and Tyr-29) in the longer helix are directed toward the center of the molecule around which the hydrophobic core of the folded VpuMA is positioned. As the observed solution structure is inconsistent with the formation of ion-conductive membrane pores defined previously for VpuMA in planar lipid bilayers, the isolated VpuMA domain as peptide Vpu1-27 was investigated in oriented phospholipid bilayers by proton-decoupled 15N cross polarization solid-state NMR spectroscopy. The line widths and chemical shift data of three selectively 15N-labeled peptides are consistent with a transmembrane alignment of a helical polypeptide. Chemical shift tensor calculations imply that the data sets are compatible with a model in which the nascent helices of the folded solution structure reassemble to form a more regular linear alpha-helix that lies parallel to the bilayer normal with a tilt angle of 相似文献   

NMR studies of the low-density lipoprotein receptor-binding peptide of apolipoprotein E bound to dodecylphosphocholine micelles.

Circular dichroism and NMR spectroscopy have been used to determine the structure of the low-density lipoprotein (LDL) receptor-binding peptide, comprising residues 130-152, of the human apolipoprotein E. This peptide has little persistent three-dimensional structure in solution, but when bound to micelles of dodecylphosphocholine (DPC) it adopts a predominantly alpha-helical structure. The three-dimensional structure of the DPC-bound peptide has been determined by using 1H-NMR spectroscopy: the structure derived from NOE-based distance constraints and restrained molecular dynamics is largely helical. The derived phi and psi angle order parameters show that the helical structure is well defined but with some flexibility that causes the structures not to be superimposable over the full peptide length. Deuterium exchange experiments suggest that many peptide amide groups are readily accessible to the solvent, but those associated with hydrophobic residues exchange more slowly, and this helix is thus likely to be positioned on the surface of the DPC micelles. In this conformation the peptide has one hydrophobic face and two that are rich in basic amino acid side chains. The solvent-exposed face of the peptide contains residues previously shown to be involved in binding to the LDL receptor.     

An inducible helix–Gly–Gly–helix motif in the N-terminal domain of histone H1e: A CD and NMR study

Knowledge of the structural properties of linker histones is important to the understanding of their role in higher-order chromatin structure and gene regulation. Here we study the conformational properties of the peptide Ac-EKTPVKKKARKAAGGAKRKTSG-NH(2) (NE-1) by circular dichroism and (1)H-NMR. This peptide corresponds to the positively charged region of the N-terminal domain, adjacent to the globular domain, of mouse histone H1e (residues 15-36). This is the most abundant H1 subtype in many kinds of mammalian somatic cells. NE-1 is mainly unstructured in aqueous solution, but in the presence of the secondary-structure stabilizer trifluoroethanol (TFE) it acquires an alpha-helical structure. In 90% TFE solution the alpha-helical population is approximately 40%. In these conditions, NE-1 is structured in two alpha-helices that comprise almost all the peptide, namely, from Thr17 to Ala27 and from Gly29 to Thr34. Both helical regions are highly amphipathic, with the basic residues on one face of the helix and the apolar ones on the other. The two helical elements are separated by a Gly-Gly motif. Gly-Gly motifs at equivalent positions are found in many vertebrate H1 subtypes. Structure calculations show that the Gly-Gly motif behaves as a flexible linker between the helical regions. The wide range of relative orientations of the helical axes allowed by the Gly-Gly motif may facilitate the tracking of the phosphate backbone by the helical elements or the simultaneous binding of two nonconsecutive DNA segments in chromatin.     

Local interactions drive the formation of nonnative structure in the denatured state of human alpha-lactalbumin: a high resolution structural characterization of a peptide model in aqueous solution.

There are a small number of peptides derived from proteins that have a propensity to adopt structure in aqueous solution which is similar to the structure they possess in the parent protein. There are far fewer examples of protein fragments which adopt stable nonnative structures in isolation. Understanding how nonnative interactions are involved in protein folding is crucial to our understanding of the topic. Here we show that a small, 11 amino acid peptide corresponding to residues 101-111 of the protein alpha-lactalbumin is remarkably structured in isolation in aqueous solution. The peptide has been characterized by 1H NMR, and 170 ROE-derived constraints were used to calculate a structure. The calculations yielded a single, high-resolution structure for residues 101-107 that is nonnative in both the backbone and side-chain conformations. In the pH 6.5 crystal structure, residues 101-105 are in an irregular turn-like conformation and residues 106-111 form an alpha-helix. In the pH 4.2 crystal structure, residues 101-105 form an alpha-helix, and residues 106-111 form a loopike structure. Both of these structures are significantly different from the conformation adopted by our peptide. The structure in the peptide model is primarily the result of local side-chain interactions that force the backbone to adopt a nonnative 310/turn-like structure in residues 103-106. The structure in aqueous solution was compared to the structure in 30% trifluoroethanol (TFE), and clear differences were observed. In particular, one of the side-chain interactions, a hydrophobic cluster involving residues 101-105, is different in the two solvents and residues 107-111 are considerably more ordered in 30% TFE. The implications of the nonnative structure for the folding of alpha-lactalbumin is discussed.     

Towards understanding the Tat translocation mechanism through structural and biophysical studies of the amphipathic region of TatA from Escherichia coli

The twin-arginine translocase (Tat) system is used by many bacteria and plants to move folded proteins across the cytoplasmic or thylakoid membrane. In most bacteria, the TatA protein is believed to form a defined pore in the membrane through homo-oligomerization with other TatA protomers. The predicted secondary structure of TatA includes a transmembrane helix, an amphipathic helix, and an unstructured C-terminal region. Here biophysical and structural investigations were performed on a synthetic peptide representing the amphipathic region of TatA (residues 22 to 44, abbreviated TatAH2). The C-terminal region of TatA (residues 44-89) was previously shown to be accessible from both the cytoplasmic and periplasmic sides of the membrane only when the membrane potential was intact, suggesting dependence of its topology on an energized membrane (Chan et al. 2007 Biochemistry 46: 7396-404). Such observation suggests that the TatAH2 region would have unique lipid interactions that may be related to the function of TatA during translocation and thus warranted further investigations. NMR and CD spectroscopy of TatAH2 show that it adopts a predominantly helical structure in a membrane environment while remaining unstructured in aqueous solution. Differential scanning calorimetry studies also reveal that TatAH2 interacts with DPPG lipids but not with DPPC, suggesting that negatively charged phospholipid head groups contribute to the membrane interactions with TatA.     

Synergistic interactions between aqueous and membrane domains of a designed protein determine its fold and stability

Membrane-spanning proteins contain both aqueous and membrane-spanning regions, both of which contribute to folding and stability. To explore the interplay between these two domains we have designed and studied the assembly of coiled-coil peptides that span from the membrane into the aqueous phase. The membrane-spanning segment is based on MS1, a transmembrane coiled coil that contains a single Asn at a buried a position of a central heptad in its sequence. This Asn has been shown to drive assembly of the monomeric peptide in a membrane environment to a mixture of dimers and trimers. The coiled coil has now been extended into the aqueous phase by addition of water-soluble helical extensions. Although too short to fold in isolation, these helical extensions were expected to interact synergistically with the transmembrane domain and modulate its stability as well as its conformational specificity for forming dimers versus trimers. One design contains Asn at a position of the aqueous helical extension, which was expected to specify a dimeric state; a second peptide, which contains Val at this position, was expected to form trimers. The thermodynamics of assembly of the hybrid peptides were studied in micelles by sedimentation equilibrium ultracentrifugation. The aqueous helical extensions indeed conferred additional stability and conformational specificity to MS1 in the expected manner. These studies highlight the delicate interplay between membrane-spanning and water-soluble regions of proteins, and demonstrate how these different environments define the thermodynamics of a given specific interaction. In this case, an Asn in the transmembrane domain provided a strong driving force for folding but failed to specify a unique oligomerization state, while an Asn in the water-soluble domain was able to define specificity for a specific aggregation state as well as modulate stability.     

Conformational switching and fibrillogenesis in the amyloidogenic fragment of apolipoprotein a-I

The N-terminal portion of apolipoprotein A-I corresponding to the first 93 residues has been identified as the main component of apolipoprotein A-I fibrils in a form of systemic amyloidosis. We have been able to characterize the process of conformational switching and fibrillogenesis in this fragment of apolipoprotein A-I purified directly from ex vivo amyloid material. The peptide exists in an unstructured form in aqueous solution at neutral pH. The acidification of the solution provokes a collapse into a more compact, intermediate state and the transient appearance of a helical conformation that rapidly converts to a stable, mainly beta-structure in the fibrils. The transition from helical to sheet structure occurs concomitantly with peptide self-aggregation, and fibrils are detected after 72 h. The alpha-helical conformation is induced by the addition of trifluoroethanol and phospholipids. Interaction of the amyloidogenic polypeptide with phospholipids prevents the switching from helical to beta-sheet form and inhibits fibril formation. The secondary structure propensity of the apolipoprotein A-I fragment appears poised between helix and the beta-sheet. These findings reinforce the idea of a delicate balance between natively stabilizing interactions and fatally stabilizing interactions and stress the importance of cellular localization and environment in the maintenance of protein conformation.     

Oligomerizaiton and fibril asssembly of the amyloid-beta protein

In this chapter, we attempt to analyze the evolution of the amyloid-beta (Abeta) molecular structure from its inception as part of the Abeta precursor protein to its release by the secretases and its extrusion from membrane into an aqueous environment. Biophysical studies suggest that the Abeta peptide sustains a series of transitions from a molecule rich in alpha-helix to a molecule in which beta-strands prevail. It is proposed that initially the extended C-termini of two opposing Abeta dimers form an antiparallel beta-sheet and that the subsequent addition of dimers generates a helical Abeta protofilament. Two or more protofilaments create a strand in which the hydrophobic core of the beta-sheets is shielded from the aqueous environment by the N-terminal polar domains of the Abeta dimers. Once the nucleation has occurred, the Abeta filament grows in length by the addition of dimers or tetramers.     

Conformational and membrane interaction studies of the antimicrobial peptide alyteserin-1c and its analogue [E4K]alyteserin-1c

Alyteserin-1c (GLKEIFKAGLGSLVKGIAAHVAS.NH(2)), first isolated from skin secretions of the midwife toad Alytes obstetricans, shows selective growth-inhibitory activity against Gram-negative bacteria. The structures of alyteserin-1c and its more potent and less haemolytic analogue [E4K]alyteserin-1c were investigated in various solution and membrane mimicking environments by proton NMR spectroscopy and molecular modelling. In aqueous solution, the peptide displays a lack of secondary structure but, in a 2,2,2-trifluoroethanol (TFE-d(3))-H(2)O solvent mixture, the structure is characterised by an extended alpha helix between residues Leu(2) and Val(21). Solution structural studies in the membrane mimicking environments, sodium dodecyl sulphate (SDS), dodecylphosphocholine (DPC), and 1,2-dihexanoyl-sn-glycero-3-phosphatidylcholine (DHPC) micelles, indicate that these peptides display an alpha helical structure between residues Lys(3) and Val(21). Positional studies of the peptides in SDS, DPC and DHPC media show that the N-terminal and central residues lie inside the micelle while C-terminal residues beyond Ala(19) do not interact with the micelles.