Electrode system for determination of microbial cell populations in polluted water

Microbial cell populations in polluted water were determined by using a fuel cell-type electrode. The electrode was composed of a Pt anode, a Pt-K3Fe(CN)6-K4Fe(CN)6 cathode, and a cation-exchange membrane for separating two electrode compartments. The principle of microbial cell number determination is based on sensing a redox dye reduced by microorganisms with the electrode. Sample solutions containing microorganisms, a redox dye (thionine), and peptone were purged with oxygen-free nitrogen during the determination. A linear relationship was obtained between the increasing rate of current and the number of microbial cells measured by the colony count method above 10(4) cells per ml. The determination time varied with the number of microbial cells determined from 20 to 60 min for 3.6 x 10(6) and 3.6 x 10(4) cells per ml, respectively.     

Dye-coupled electrode system for the rapid determination of cell populations in polluted water.

We determined cell populations in polluted waters by using a fuel cell-type electrode. The electrode was constructed from a platinum anode, a silver peroxide cathode, and a membrane filter for retaining microorganisms. The principle of cell number determination is based on sensing a redox dye reduced by the microorganisms with the electrode. Sample solutions containing microorganisms were membrane filtered, and the resulting filter containing microbial cells was attached to the surface of a platinum anode. The electrode was immersed in phosphate buffer solution (0.05 M, pH 7) containing a redox dye (2,4-dichlorophenol-indophenol), and the current generated was measured. The response time of the electrode system was 10 to 20 min, and the current generated was proportional to cell populations above 10(4) cells/ml.     

Kinetic data for redox reactions of cytochrome c with Fe(CN)5X complexes and the question of association prior to electron transfer

Use of rigorous equilibration kinetics to evaluate rate constants for the Fe(CN)6 4- reduction of horse-heart cytochrome c in the oxidized form, cyt c (III), has shown that limiting kinetics do not apply with concentrations of Fe(CN)6 4- (the reactant in excess) in the range 2-10 x 10(-4) M, I = 0.10 M (NaCl). The reaction conforms to a first-order rate law in each reactant, and at 25 degrees C, pH 7.2 (Tris), it is concluded that K for association prior to electron transfer is less than 200 M-1. From previous studies at 25 degrees C, ph 7.0 (10(-1) M phosphate), I = 0.242 M (NaCl), a value K = 2.4 x 10(3) M-1 has been reported. Had such a value applied, some or all of the redox inactive complexes Mo(CN)8 4-, Co(CN)6 3-, Cr(CN)6 3-, Zr(C2O4)4 4- present in amounts 5-20 x 10(-4) M would have been expected to associate at the same site and partially block the redox process. No effect on rats was observed. With the reductants Fe(CN)5(4-NH2-py)3- and Fe(CN)5(imid)3-, reactions proceeded to greater than 90% completion and rate laws were again first order in each reactant. Rate constants (M-1 sec-1) at 25 degrees C, pH 7.2 (Tris), I = 0.10 M (NaCl), are Fe(CN)6 4- (3.5 x 10(4)), Fe(CN)5(4-NH2py)3- (6.7 x 10(5), and Fe(CN)5(imid)3- (4.2 x 10(5). Related reactions in which cyt c(II) is oxidized are also first order in each reactant, Fe(CN)6 3- (9.1 x 10(6)), Fe(CN)5(NCS)3- (1.3 x 10(6)), Fe(CN)5(4-NH2py)2- (3.8 x 10(6) at pH 9.4), and Fe(CN)5(NH3)2- (2.75 x 10(6) at ph 8). Redox inactive Co(CN)6 3- (1.0 x 10(-3) M) has no effect on the reaction of Fe(CN)6 3- which suggests that a recent interpretation for the Fe(CN)6 3- oxidation of cyt c(II), I = 0.07 M, may also require reappraisal.     

A bioelectrochemical polypyrrole-containing Fe(CN)6(3-) interface for the design of a NAD-dependent reagentless biosensor

Ferricyanide ions were immobilized on a platinum electrode surface by means of an electrochemically grown polypyrrole film. The entrapped Fe(CN)6(3-)/Fe(CN)6(4-) redox system displayed a high heterogeneous electron transfer rate. The resulting modified electrode was efficient for the ferricyanide-mediated NADH oxidation catalyzed by a diaphorase. The bioelectrochemical interface was applied to the design of a reagentless amperometric D-lactate biosensor. A weakly polarized two polypyrrole-containing Fe(CN)6(3-) modified electrode system was involved without any reference. An enzymatic solution containing D-lactate dehydrogenase, diaphorase and NAD-dextran was further confined on the sensing electrode using a semi-permeable membrane. The sensitivity and the response time of the reagentless biosensor were similar to those of the analogous sensor working with soluble mediator and cofactor, i.e. 25 microA mM(-1) cm(-2) and 120 s, respectively. The other analytical performances were less satisfactorily: the detection limit was 5 x 10 mmol L(-1) and the linearity range was comprised between 0.1 and 0.5 mmol L(-1).     

Electrochemical impedimetric immunosensor for insulin like growth factor-1 using specific monoclonal antibody-nanogold modified electrode

An electrochemical impedimetric immunosensor was developed for ultrasensitive determination of insulin-like growth factor-1 (IGF-1) based on immobilization of a specific monoclonal antibody on gold nanoparticles (GNPs) modified gold electrode. Self-assembly of colloidal gold nanoparticles on the gold electrode was conducted through the thiol groups of 1,6-hexanedithiol (HDT) monolayer as a cross linker. The redox reactions of [Fe(CN)(6)](4-)/[Fe(CN)(6)](3-) on the electrode surface was probed for studying the immobilization and determination processes, using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The interaction of antigen with grafted antibody recognition layer was carried out by soaking the modified electrode into antigen solution at 37°C for 3 h. The immunosensor showed linearity over 1.0-180.0 pg mL(-1) and the limit of detection was 0.15 pg mL(-1). The association constant between IGF-1 and immobilized antibody was calculated to be 9.17×10(11) M(-1). The proposed method is a useful tool for screening picogram amounts of IGF-1 in clinical laboratory as a diagnostic test.     

Electrochemical selective determination of ascorbic acid at redox active polymer modified electrode derived from direct blue 71

A simple selective method for determination of ascorbic acid using polymerized direct blue 71 (DB71) is described. Anodic polymerization of the azo dye DB71 on glassy carbon (GC) electrode in 0.1M H(2)SO(4) acidic medium was found to yield thin and stable polymeric films. The poly(DB71) films were electroactive in wide pH range (1-13). A pair of symmetrical redox peaks at a formal redox potential, E('0)=-0.02V vs. Ag/AgCl (pH 7.0) was observed with a Nernstian slope -0.058V, is attributed to a 1:1 proton+electron involving polymer redox reactions at the modified electrode. Scanning electron microscope (SEM), atomic force microscope (AFM) and electrochemical impedance spectroscopy (EIS) measurements were used for surface studies of polymer modified electrode. Poly(DB71) modified GC electrode showed excellent electrocatalytic activity towards ascorbic acid in neutral buffer solution. Using amperometric method, linear range (1x10(-6)-2x10(-3)M), dynamic range (1x10(-6)-0.01M) and detection limit (1x10(-6)M, S/N=3) were estimated for measurement of ascorbic acid in pH 7.0 buffer solution. Major interferences such as dopamine and uric acid are tested at this modified electrode and found that selective detection of ascorbic acid can be achieved. This new method successfully applied for determination of ascorbic acid in commercial tablets with satisfactory results.     

Aptamer biosensor for label-free square-wave voltammetry detection of angiogenin

Angiogenin (Ang), one of the most potent angiogenic factor, is related with the growth and metastasis of numerous tumors. This paper presents a very simple and label-free square-wave voltammetry (SWV) aptasensor to detect angiogenin, in which an anti-angiogenin-aptamer was used as a molecular recognition element, and the couple ferro/ferricyanide as a redox probe. At the bare gold electrode, the redox couple (K₄[Fe(CN)₆]/K₃[Fe(CN)₆]) can be very easily accessed to the electrode surface to give a very strong SWV signal. At the anti-angiogenin/Au electrode surface, when angiogenin was added to the electrochemical cell, the binding of the analyte results in less availability for a redox reaction, which led to smaller SWV current. To quantify the amount of angiogenin, current suppressions of SWV peak were monitored using the redox couple of an [Fe(CN)₆]^4−/3− probe. The plot of signal suppression against the logarithm of angiogenin concentration is linear with over the range from 0.01 nM to 30 nM with a detection limit of 1 pM. The aptasensor also showed very good selectivity for angiogenin without being affected by the presence of other proteins in serum. It is the first time to use a very simple method to detect the cancer marker. Such an aptasensor opens a rapid, selective and sensitive route for angiogenin detection and provides a promising strategy for other protein detections.     

A plasmamembrane redox system and proton transport in isolated mesophyll cells

Potassium ferricyanide (K₃Fe[CN]₆) was added to aerated and stirred nonbuffered suspensions of mechanically isolated photosynthetically competent Asparagus sprengeri Regel mesophyll cells. Rates of Fe(CN)₆³⁻ reduction and H⁺ efflux were measured with or without illumination. On the addition of 1 millimolar Fe(CN)₆³⁻ to nonilluminated cell suspensions acidification of the medium indicated an H⁺ efflux of 1.54 nanomoles H⁺/10⁶ cells per minute. Simultaneous Fe(CN)₆³⁻ reduction occurred at a rate of 1.55 nanomoles Fe(CN)₆³⁻/10⁶ cells per minute. Illumination stimulated these rates 14 to 17 times and corresponding values were 26.1 nanomoles H⁺/10⁶ cells per minute and 22.9 nanomoles Fe(CN)₆³⁻/10⁶ cells per minute. These two processes appeared to be tightly coupled and were rapidly inhibited when illuminated suspensions were transferred to darkness or treated with 1 micromolar 3-(3,4-dichlorophenyl)-1,1 dimethylurea. Addition of 0.1 millimolar diethylstilbestrol eliminated ATP dependent H⁺ efflux in illuminated or nonilluminated cells but had no influence on Fe(CN)₆³⁻ dependent H⁺ efflux. Recent reports indicate that a transmembrane redox system spans the plasma membrane of root cells and is coupled to the efflux of H⁺. The present report extends these observations to photosynthetically competent mesophyll cells. The results indicate a transport process independent of ATP driven H⁺ efflux which operates with a H⁺/e⁻ stoichiometry of one.     

Determination of cell concentration in a plant cell suspension using a fluorescence microplate reader

Microscopic counting of plant cells is a very tedious and time-consuming process and is therefore seldom used to evaluate plant cell number on a routine basis. This study describes a fast and simple method to evaluate cell concentration in a plant cell suspension using a fluorescence microplate reader. Eschscholtzia californica cells were fixed in a mix of methanol and acetic acid (3:1) and stained with a fluorescent DNA binding dye (Hoechst 33258). Readings were done in a fluorescence microplate reader at 360/465 nm. Specific binding of the dye to double-stranded DNA was significantly favored over unspecific binding when 1.0 M Tris buffer at pH 7.5 containing 1.0 M NaCl and 75 microg ml(-1) of Hoechst 33258 was used. Fluorescence readings must be done between 4 min and 12 min following the addition of the staining solution to the sample. The microplate counting method provides a convenient, rapid and sensitive procedure for determining the cell concentration in plant cell suspensions. The assay has a linear detection range from 0.2 x 10(6) cells to 10.0 x 10(6) cells per milliliter (actual concentration in the tested cell suspension). The time needed to perform the microplate counting was 10% of that needed for the microscopic enumeration. However, this microplate counting method can only be used on genetically stable cell lines and on asynchronous cell suspensions.     

Sensitive determination of microbial growth by nucleic acid staining in aqueous suspension

The determination of cell numbers or biomass in laboratory cultures or environmental samples is usually based on turbidity measurements, viable counts, biochemical determinations (e.g., protein and lipid measurements), microscopic counting, or recently, flow cytometric analysis. In the present study, we developed a novel procedure for the sensitive quantification of microbial cells in cultures and most-probable-number series. The assay combines fluorescent nucleic acid staining and subsequent fluorescence measurement in suspension. Six different fluorescent dyes (acridine orange, DAPI [4',6'-diamidino-2-phenylindole], ethidium bromide, PicoGreen, and SYBR green I and II) were evaluated. SYBR green I was found to be the most sensitive dye and allowed the quantification of 50,000 to up to 1.5 x 10(8) Escherichia coli cells per ml sample. The rapid staining procedure was robust against interference from rRNA, sample fixation by the addition of glutaric dialdehyde, and reducing agents such as sodium dithionite, sodium sulfide, and ferrous sulfide. It worked well with phylogenetically distant bacterial and archaeal strains. Excellent agreement with optical density measurements of cell increases was achieved during growth experiments performed with aerobic and sulfate-reducing bacteria. The assay offers a time-saving, more sensitive alternative to epifluorescence microscopy analysis of most-probable-number dilution series. This method simplifies the quantification of microbial cells in pure cultures as well as enrichments and is particularly suited for low cell densities.     

Strategy of red blood cells immobilisation onto a gold electrode: Characterization by electrochemical impedance spectroscopy and quartz crystal microbalance

This study describes the grafting of red blood cells (RBC) onto a gold electrode. The erythrocytes were immobilised using antigen/antibody crosslinking based on the bonding of anti-D with the corresponding antigen of the RBC membrane that is shared by all erythrocytes from the positive rhesus group (O⁺). To optimise the reproducibility of the modified electrode and to avoid nonspecific interactions, the anti-D layer was deposited onto a protein G layer. The bridge between the protein G and the gold transducer was formed using mixed thiol-based self-assembled monolayer (SAM) (a mixture of 11-mercaptoundecanoic acid and 6-mercapto-1-hexanol in a 1/10 ratio). Each layer deposited was characterized, firstly, with a quartz crystal microbalance to obtain the deposited mass and the corresponding number of moles per square centimetres and secondly, by electrochemical impedance spectroscopy (EIS) using a redox couple Fe(CN)₆^3−/4− (1:1) as an EIS probe. Subsequent modelling with appropriate circuitry enabled the values for each component representing the interface (electrode/film/solution) to be calculated at each step of the grafting process. From these results the surface coverage has been calculated to range from 95 to 98%.     

Determination of nanomolar uric and ascorbic acids using enlarged gold nanoparticles modified electrode

Individual and simultaneous determination of 50 nM uric acid (UA) and ascorbic acid (AA) using enlarged, citrate-stabilized gold nanoparticles (AuNPs) self-assembled to 2,5-dimercapto-1,3,4-thiadiazole (DMT) monolayer modified Au (Au/DMT) electrode by an amperometric method is described for the first time. Self-assembly of AuNPs on the electrode surface was confirmed by atomic force microscopy (AFM), attenuated total reflectance FT-IR and diffuse reflectance spectral measurements. The electron transfer reaction (ETR) of [Fe(CN)₆]^3−/4− was blocked at Au/DMT electrode, whereas it was restored with a peak separation of 200 mV after the attachment of AuNPs on the Au/DMT (Au/DMT/AuNPs) electrode, which was confirmed from the ETR of the [Fe(CN)₆]^3−/4− redox couple. When the self-assembled AuNPs were enlarged by hydroxylamine seeding, the ETR of [Fe(CN)₆]^3−/4− was improved significantly with a peak separation of 100 mV. Tapping mode AFM showed that the average size of the enlarged-AuNPs (E-AuNPs) was 50-70 nm. The E-AuNPs modified electrode catalyzes the oxidation of AA and UA, separates their voltammetric signals by 200 mV, and has excellent sensitivity towards AA and UA with a detection limit of 50 nM. The practical application of the modified electrode was demonstrated by measuring the concentration of UA in blood serum and urine.     

Chemiluminescent assay for detection of viable microorganisms

The redox reaction between quinone and viable microorganisms produces active oxygen species. In this study, the production rates of active oxygen species were determined by a luminol chemiluminescent assay, and the luminescence intensity was found to be proportional to the viable cell number. The high sensitivity of the luminol chemiluminescent assay was achieved with Mo-ethylenediaminetetraacetate complex and menadione or coenzyme Q1. The detectable cell densities of bacteria and yeasts were found to be approximately several thousand colony-forming units (CFU/ml) when assays were performed with a 96-well microplate luminometer. The chemiluminescent assay requires 10 min for incubation of quinone and microorganisms and 2s for photon counting. Single Escherichia coli was detected after 4h of cultivation and centrifugation (5 min x 2). This simple chemiluminescent assay is expected to be useful for the rapid detection of viable bacteria and yeast.     

Isolation of alveolar type II cells by centrifugal elutriation.

Centrifugal elutriation (counterflow centrifugation) was used to develop a reproducible method for obtaining a nearly pure population of isolated alveolar type II cells. Lung was dissociated into individual cells with recrystallized trypsin, and the type II cells were partially purified by centrifugation on a discontinuous density gradient. The alveolar type II cells were finally purified by centrifugal elutriation. Cells were collected from the elutriator rotor by stepwise increases in flow rates. Cells obtained at flow rates of 7 and 14 ml per min were lymphocytes, other small cells, a few type II cells and cell debris; cells collected at flow rates of 18 and 22 ml per min were mainly type II cells; and cells collected at flow rates of 28, 34 and 43 ml per min were macrophages, some type II cells, other lung cells and cell aggregates. At flow rates of 18 and 22 ml per min, 1.9 +/- 1.0 x 10(6) cells per rat lung (mean +/- S.D., n=30) were recovered of which 86 +/- 6% were type II cells. At these flow rates, 94% of the cells excluded the vital dye erythrosin B from their cytoplasm. They consumed oxygen at a rate of 101 +/- 21 nmol per hr . 10(6) cells (mean +/- S.D., n=4), and their oxygen consumption increased only 10% after 10 mM sodium succinate was added. The cells incorporated [14C]leucine into protein and lipid for 4 hr. Electron micrographs of the cells collected at flow rates of 18 and 22 ml per min show a high percentage of morphologically intact alveolar type II cells. We conclude that centrifugral elutriation is a reproducible method for obtaining nearly pure, metabolically active alveolar type II cells.     

Monitoring of cell growth and assessment of cytotoxicity using electrochemical impedance spectroscopy

Electrochemical impedance spectroscopy (EIS) was used to monitor the growth of mammalian cancer cells and evaluate the cytotoxicity of chemicals using Fe(CN)6(3-/4-) as a redox probe. Cancer cells, the human hepatocarcinoma cell line (BEL7404), were grown on optically transparent indium tin oxide (ITO) semiconductor slides, which were used as the working electrodes in electrochemical experiments. Attachment and proliferation of cancer cells on ITO surfaces resulted in increase of electron-transfer resistance (R(et)) between the redox probe of Fe(CN)6(3-/4-) in electrolyte solution and ITO electrode surface. For cytotoxicity assessment, cells grown on ITO substrates were further cultured in the presence of different cytotoxicants and electrochemical impedance measurements were carried out at different time intervals. Gemcitabine, a promising antineoplastic drug showing activity against a wide spectrum of human solid tumors, was selected as a model for long-term cytotoxicity effect study, whereas mercury chloride represented a model for acute toxicants. The inhibitions of gemcitabine and mercury chloride on the viability and proliferation of BEL7404 cells were observed from the electrochemical impedance experiments, and the different action modes were discriminated. Additionally, microscope images were also used to observe the effects of these two chemicals on the morphology of the cells. General consistency has been found between the electrochemical impedance response and the morphological observation. Such an impedance method provides a simple and inexpensive way for in vitro assessment of chemical cytotoxicity.     

Binding of transferrin-iron to the plasma membrane of a lactating rabbit mammary gland cell

1. Cells isolated from a lactating rabbit mammary gland have been investigated for transferrin-iron receptors. The existence of these structures has been demonstrated through a specific binding with a competitor non-labelled rabbit transferrin. 2. The interaction of iron-receptor complex depends on the concentration of [59Fe]transferrin, the number of cells and the time. 3. Scatchard's plot of data indicates two classes of receptor sites: one with a binding capacity 6.48 x 10(-9) g Fe per cell and affinity constant 2.48 x 10(10) M-1 and another with 1.06 x 10(-8) g Fe per cell and 4.66 x 10(11) M-1 respectively. 4. The probable mechanism of the iron transport from blood to milk through the lactating cell was discussed.     

Survival of Enterobacter cloacae and Pseudomonas paucimobilis in yoghurts manufactured from cow's milk and soymilk during storage at different temperatures.

The survival of two microbial contaminants, Enterobacter cloacae and Pseudomonas paucimobilis, in yoghurts manufactured from cow's milk and soymilk was investigated during storage for 45 days at 4 and 12 degrees C. Sensory panel tests performed before microbiological investigation, showed that the flavor of soy-yoghurts made with cocoa powder or malt added did not have the beany taste of soy beans. Both contaminants were significantly resistant to low pH values during storage for 32 days at 4 degrees C. The survival at 4 degrees C was remarkable in both plain and flavored yoghurts and a population close to 10(2) C.F.U./ml was observed after 38 days of storage. Experiments performed with soymilk yoghurts showed an enhanced survival of P. paucimobilis at 4 degrees C compared to the storage in cow's milk yoghurts; microbial values were close to 7-8 x 10(6) C.F.U./ml after 16 days. Soymilk exhibited a protective effect on L. delbrueckii subsp. bulgaricus and S. thermophilus at 12 degrees C and, compared to the survival in cow's milk yoghurts, a larger number of viable cells of both probiotic microorganisms (10(6) and 10(8) C.F.U./ml, respectively) were observed after 36 days of storage.     

Expression and transfer of engineered catabolic pathways harbored by Pseudomonas spp. introduced into activated sludge microcosms.

Two genetically engineered microorganisms (GEMs), Pseudomonas sp. strain B13 FR1(pFRC20P) (FR120) and Pseudomonas putida KT2440(pWWO-EB62) (EB62), were introduced into activated sludge microcosms that had the level of aeration, nutrient makeup, and microbial community structure of activated sludge reactors. FR120 contains an experimentally assembled ortho cleavage route for simultaneous degradation of 3-chlorobenzoate (3CB) and 4-methyl benzoate (4MB); EB62 contains a derivative TOL plasmid-encoded degradative pathway for toluene experimentally evolved so that it additionally processes 4-ethyl benzoate (4EB). Experiments assessed survival of the GEMs, their ability to degrade target substrates, and lateral transfer of plasmid-encoded recombinant DNA. GEMs added at initial densities of 10(6) to 10(7) bacteria per ml of activated sludge declined to stable population densities of 10(4) to 10(5) bacteria per ml. FR120 degraded combinations of 3CB and 4MB (1 mM each) following 3 days of adaptation in the microcosms. Indigenous microorganisms required an 8-day adaptation period before degradation of 4MB was observed; 3CB was degraded only after the concentration of 4MB was much reduced. The indigenous microbial community was killed when both compounds were present at concentrations of 4.0 mM. However, in parallel microcosms containing FR120, the microbial community maintained a normal density of viable cells. Indigenous microbes readily degraded 4EB (2 mM), and EB62 did not significantly increase the observed rate of degradation. In filter matings, transfer of pFRC20P, which specifies mobilization but not transfer functions, from FR120 to P. putida UWC1 was not detectable (< 10(-7) transconjugants per donor cell).(ABSTRACT TRUNCATED AT 250 WORDS)     

Voltammetric determination of epinephrine by White rot fungi (Phanerochaete chrysosporium ME446) cells based microbial biosensor

The lyophilized biomass of White rot fungi (Phanerochaete chrysosporium ME446) was immobilized in gelatine using glutaraldehyde crosslinking agent on a Pt working electrode. The fungal cells retained their laccase activity under entrapped state. The immobilized cells were used as a source of laccase to develop amperometric epinephrine biosensor. The catalytic action of the laccase in the biosensor released an epinephrinequinone as a result of redox activity, thereby causing an increase in the current. The optimal working conditions of the biosensor were carried out at pH 4.5 (50 mM acetate buffer containing 100 mM K(3)Fe(CN)(6)), and 20°C. The sensor response was linear over a range of 5-100 μM epinephrine. The detection limit of the biosensor was found to be 1.04 μM. In the optimization and characterization studies of the microbial biosensor some parameters such as effect of fungi and gelatine amount, percentage of glutaraldehyde on the biosensor response and substrate specificity were carried out. In the application studies of the biosensor, sensitive determination of epinephrine in pharmaceutical ampules was investigated.