Process optimization and characterization of poloxamer solid dispersions of a poorly water-soluble drug

The objective of the present investigation was to improve the dissolution rate of Rofecoxib (RXB), a poorly water-soluble drug by solid dispersion technique using a water-soluble carrier, Poloxamer 188 (PXM). The melting method was used to prepare solid dispersions. A 3² full factorial design approach was used for optimization wherein the temperature to which the melt-drug mixture cooled (X ₁) and the drug-to-polymer ratio (X ₂) were selected as independent variables and the time required for 90% drug dissolution (t₉₀) was selected as the dependent variable. Multiple linear regression analysis revealed that for obtaining higher dissolution of RXB from PXM solid dispersions, a low level ofX ₁ and a high level ofX ₂ were suitable. The differential scanning calorimetry and x-ray diffraction studies demonstrated that enhanced dissolution of RXB from solid dispersion might be due to a decrease in the crystallinity of RXB and PXM and dissolution of RXB in molten PXM during solid dispersion preparation. In conclusion, dissolution enhancement of RXB was obtained by preparing its solid dispersions in PXM using melting technique. The use of a factorial design approach helped in identifying the critical factors in the preparation and formulation of solid dispersion. Published: April 13, 2007     

Kneading Technique for Preparation of Binary Solid Dispersion of Meloxicam with Poloxamer 188

The aim of the present study was to enhance the dissolution rate of meloxicam (MLX), a practically water-insoluble drug by preparation of solid dispersion using a hydrophilic polymer, poloxamer 188 (PXM). The kneading technique was used to prepare solid dispersions. A 3² full factorial design approach was used for optimization wherein the drug, polymer ratio (X ₁), and the kneading time (X ₂) were selected as independent variables and the dissolution efficiency at 60 min (%DE₆₀) and yield percent were selected as the dependent variable. Multiple linear regression analysis revealed that for obtaining higher dissolution of MLX from PXM solid dispersions, a high level of X ₁ and a high level of X ₂ were suitable. The use of a factorial design approach helped in optimization of the preparation and formulation of solid dispersion. The optimized formula was characterized by solubility studies, angle of repose, and contact angle; Fourier transform infrared spectroscopy, differential scanning calorimetry, x-ray diffraction studies, and scanning electron microscopy demonstrated that enhanced dissolution of MLX from solid dispersion might be due to a decrease in the crystallinity of MLX and PXM. Analysis of dissolution data of optimized formula indicated the best fitting with Korsemeyer–Peppas model and the drug release kinetics as Fickian diffusion. In conclusion, dissolution enhancement of MLX was obtained by preparing its solid dispersion with PXM using kneading technique.     

Solubility Enhancement of Lovastatin by Modified Locust Bean Gum Using Solid Dispersion Techniques

The aim of the present study was to improve the solubility of poorly water soluble drug lovastatin (LS) by solid dispersion (SD) techniques using modified locust bean gum (MLBG) as a carrier. The locust bean gum (LBG) was modified by heating and there observed irreversible decrease in viscosity, whereas swelling property remains unaffected. The advantage of modification of LBG was illustrated by difference in dissolution profiles of their SD. Effect of polymer concentration and methods of preparation on solubility enhancement were studied using solubility and dissolution studies, respectively. The result of solubility study showed increase in solubility of LS with increase in concentration of MLBG. It was found that the dissolution rate of LS from its SD was dependent on the method of preparation of solid dispersions. Dissolution study revealed that the modified solvent evaporation is most convenient and effective method for solubility enhancement of poorly water soluble drug LS, among various methods of preparation of SD. The prepared SDs were characterized by differential scanning calorimetry, scanning electron microscopy, and X-ray diffraction study. In vivo study was performed by measuring 3-hydroxy-3-methyl-glutaryl-coenzyme A (HMG Co-A) reductase inhibition activity. Significant reduction in HMG Co-A reductase activity was observed in case of solid dispersions of LS than plain LS. In conclusion, MLBG could be used as a potential carrier in enhancing the dissolution rate and bioavailability of LS.     

Effect of hydrophilic swellable polymers on dissolution enhancement of carbamazepine solid dispersions studied using response surface methodology

The objective of this work was to study dissolution enhancement efficiency and solid dispersion formation ability of hydrophilic swellable polymers such as sodium carboxymethyl cellulose (Na-CMC), sodium starch glycolate (SSG), pregelatinized starch (PGS), and hydroxypropylmethyl cellulose (HPMC) with carbamazepine using 3² full factorial design for each of the polymers. Solid dispersions of carbamazepine were prepared using solvent evaporation method with around 70% solvent recovery. The independent variables were the amount of polymer and organic solvent. The dependent variables assessed were percentage drug dissolved at various time points and dispersion efficiency (ie, in terms of particle size of solid dispersion). Solid dispersions were evaluated for percentage drug dissolved, wettability, differential scanning calorimetry, scanning electron microscopy, and angle of repose. Multiple linear regression of results obtained led to equations, which generated contour plots to relate the dependent variables. Similarity factor and mean dissolution time were used to compare dissolution patterns obtained in distilled water and simulated gastric fluid United States Pharmacopeia (USP) XXVI of pH 1.2. Maximum drug dissolution was obtained with polymer order Na-CMC>SSG>PGS>HPMC. Particle size of drug was reduced ≈ 10–15, 3–5, 5–7, and 10–25 times in Na-CMC, SSG, PGS, and HPMC solid dispersions, respectively; whereas wettability of solid dispersions was found in the order of Na-CMC>HPMC>PGS>SSG. Angle of repose was found to be in the range of 29° to 35° for all solid dispersions, which shows good flowability characteristics. HPMC showed increase in drug dissolution up to an optimized level; however, furthers increase in its concentration decreased drug dissolution. Published: April 6, 2007     

Improved Bioavailability of Poorly Water-Soluble Drug Curcumin in Cellulose Acetate Solid Dispersion

Curcumin (Cur), one of the most widely used natural active constituents with a great variety of beneficial biological and pharmacological activities, is a practically water-insoluble substance with a short biologic half-life. The aim of this study was to develop a sustained-release solid dispersion by employing water-insoluble carrier cellulose acetate for solubility enhancement, release control, and oral bioavailability improvement of Cur. Solid dispersions were characterized by solubility, in vitro drug release, Fourier transform infrared spectroscopy, X-ray diffractometry, and differential scanning calorimetry studies. The in vivo performance was assessed by a pharmacokinetic study. Solid-state characterization techniques revealed the amorphous nature of Cur in solid dispersions. Solubility/dissolution of Cur was enhanced in the formulations in comparison with pure drug. Sustained-release profiles of Cur from the solid dispersions were ideally controlled in vitro up to 12 h. The optimized formulation provided an improved pharmacokinetic parameter (C _max = 187.03 ng/ml, t _max = 1.95 h) in rats as compared with pure drug (C _max = 87.06 ng/ml, t _max = 0.66 h). The information from this study suggests that the developed solid dispersions successfully enhanced the solubility and sustained release of poorly water-soluble drug Cur, thus improving its oral bioavailability effectively.     

Comparison of Spray Freeze Drying and the Solvent Evaporation Method for Preparing Solid Dispersions of Baicalein with Pluronic F68 to Improve Dissolution and Oral Bioavailability

The objective of this study was to prepare solid dispersions consisting of baicalein and a carrier with a low glass transition/melting point (Pluronic F68) by spray freeze drying (SFD). We compared these powders to those produced from the conventional solvent evaporation method. In the SFD process, a feeding solution was atomized above the surface of liquid nitrogen following lyophilization, which resulted in instantaneously frozen microparticles. However, solid dispersions prepared by the solvent evaporation method formed a sticky layer on the glass flask with crystalline baicalein separated out from the carrier. The powder samples were characterized by scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), surface area measurement, differential scanning calorimetry, and Fourier transform infrared spectrometry. SEM and PXRD results suggested that the majority of baicalein in the SFD-processed solid dispersion was in the amorphous state, which has a higher specific surface area than pure baicalein. However, the majority of baicalein was recrystallized in the solid dispersion at the same composition prepared by the solvent evaporation method, which showed a similar dissolution rate to the physical mixture. SFD product was physically and chemically stable after being stored at 40°C with low humidity for 6 months. After enzyme hydrolysis, baicalein in the SFD product displayed a significantly shorter T _max and higher C _max than pure baicalein after oral dosing. The relative bioavailability of the SFD product versus pure baicalein determined by comparing the AUC_0–12 was 233%, which demonstrated the significantly improved oral bioavailability of baicalein produced by the SFD technique.     

Solid Dispersions of Imidazolidinedione by PEG and PVP Polymers with Potential Antischistosomal Activities

Solid dispersions have been used as a strategy to improve the solubility, dissolution rate, and bioavailability of poor water-soluble drugs. The increase of the dissolution rate presented by (5Z)-3-(4-chloro-benzyl)-5-(4-nitro-benzylidene)-imidazolidine-2,4-dione (LPSF/FZ4) from the solid dispersions is related to the existence of intermolecular interactions of hydrogen bond type (>N–H^...O<) between the amide group (>N–H) of the LPSF/FZ4 and the ether group (–O–) of the polyethyleneglycol polymer, or the carbonyl (C=O) of the polyvinylpyrrolidone polymer (PVP). The intensity of these interactions is directly reflected in the morphology acquired by LPSF/FZ4 in these systems, where a new solid phase, in the form of amorphous aggregates of irregular size, was identified through scanning electron microscopy and confirmed in the characterizations achieved using X-ray diffraction and thermal analysis of DSC. The solid dispersions with the polymer PVP, in higher concentrations, were revealed to be the best option to be used in the formulations of LPSF/FZ4 in both theoretical and experimental studies.     

Effect of N-trimethyl chitosan enhancing the dissolution properties of the lipophilic drug cyclosporin A

The aim was to evaluate the influence of N-trimethyl chitosan chloride (TMC) as a carrier for solid dispersion on the dissolution of poorly water-soluble drugs. In this study, we used cyclosporin A(CyA) as a model drug and TMC as a carrier. The effect of various formulation and process variables including TMC-to-CyA mixing weight ratio, weigh molecular(M_w) of TMC and methods used to disperse CyA along with the TMC on the drug dissolution was investigated. The nature of CyA dispersed in the matrix was studied by powder X-ray diffractometry (PXRD), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and dissolution rate analyses. It was proved that all solid mixtures of CyA with TMCs showed a significantly rapid dissolution rate compared to pure drug and physical mixture. The greater the TMC content the higher the drug dissolution was, up to a maximum corresponding to a polymer: drug ratio of 3:1. The lower the M_w of TMC, the more important the polymer effect was. The dissolution of CyA was remarkably improved by the solid dispersion. The drug dissolution enhancement was attributed to the decreased drug crystallinity and size and polymer wetting effect. There was no significant difference in the efficiency of improving the drug dissolution between the solid dispersions prepared by solvent dispersing and by co-grinding. It was suggested that the TMC with a lower molecular weight is a useful carrier for solid dispersion.     

Application of Carrier and Plasticizer to Improve the Dissolution and Bioavailability of Poorly Water-Soluble Baicalein by Hot Melt Extrusion

The objective of this study was to develop a suitable formulation for baicalein (a poorly water-soluble drug exhibiting high melting point) to prepare solid dispersions using hot melt extrusion (HME). Proper carriers and plasticizers were selected by calculating the Hansen solubility parameters, evaluating melting processing condition, and measuring the solubility of obtained melts. The characteristic of solid dispersions prepared by HME was evaluated. The dissolution performance of the extrudates was compared to the pure drug and the physical mixtures. Physicochemical properties of the extrudates were characterized by differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and Fourier transform infrared spectroscopy (FTIR). Relative bioavailability after oral administration in beagle dogs was assessed. As a result, Kollidon VA64 and Eudragit EPO were selected as two carriers; Cremophor RH was used as the plasticizer. The dissolution of all the extrudates was significantly improved. DSC and PXRD results suggested that baicalein in the extrudates was amorphous. FTIR spectroscopy revealed the interaction between drug and polymers. After oral administration, the relative bioavailability of solid dispersions with VA64 and EPO was comparative, about 2.4- and 2.9-fold greater compared to the pure drug, respectively.

Figure

Open in a separate windowᅟKEY WORDS: baicalein, carrier, high melting point, hot melt extrusion, plasticizer, solid dispersion     

Enhancement of dissolution profile by solid dispersion (kneading) technique

This article investigates enhancement of the dissolution profile of valdecoxib using solid dispersion with PVP. The article also describes the preparation of fast-dissolving tablets of valdecoxib by using a high amount of superdisintegrants. A phase solubility method was used to evaluate the effect of various water-soluble polymers on aqueous solubility of valdecoxib. Polyvinyl pyrrolidone (PVP K-30) was selected and solid dispersions were prepared by the method of kneading. Dissolution studies, using the USP paddle method were performed for solid dispersions of valdecoxib. Infrared (IR) spectroscopy, differential scanning calorimetry (DSC), and x-ray diffractometry (XRD) were performed to identify the physicochemical interaction between drug and carrier, hence its effect on dissolution. Tablets were formulated containing solid dispersion products and compared with commercial products. IR spectroscopy, XRD, and DSC showed no change in the crystal structure of valdecoxib. Dissolution of valdecoxib improved significantly in solid dispersion products (<85% in 5 minutes). Tablets containing solid dispersion exhibited better dissolution profile than commercial tablets. Thus, the solid dispersion technique can be successfully used for improvement of dissolution of valdecoxib. Published: August 18, 2006     

Solid Dispersion as an Approach for Bioavailability Enhancement of Poorly Water-Soluble Drug Ritonavir

Ritonavir is an antiretroviral drug characterized by low solubility and high permeability which corresponds to BCS class II drug. The purpose of the study was to develop solid dispersion by different methods and investigate them for in vitro and in vivo performance for enhancing dissolution and bioavailability, respectively. Since the drug possesses food-related absorption, the effect of biorelevant media (FaSSIF and FeSSIF state) on dissolution behavior was also studied. The solid dispersion was prepared using Gelucire as carrier in 1:4 ratio by different methods and were characterized for differential scanning calorimetry (DSC), X-ray diffractometry, scanning electron microscopy, and FT-IR. Oral bioavailability of 10 mg of ritonavir in solid dispersion prepared by solvent evaporation (SE1) and melt method (MM1) was compared with pure drug after oral administration of solid dispersion and pure drug to Albino Wistar rats of either sex. The results suggested formation of eutectic solid dispersion. In vitro dissolution studies was performed in 0.1 N HCl and biorelevant media showed enhanced dissolution rate as compared to pure drug in both FeSSIF media and 0.1 N HCl. The apparent rate of absorption of ritonavir from SE1 (C _max 20221.37 ng/ml, t _max 0.5 h) was higher than that of MM1 (C _max 2,462.2, t _max 1 h) and pure drug (C _max 1,354.8 ng/ml, t _max 0.5 h). On the basis of the result obtained, it was concluded that solid dispersion is a good approach to enhance solubility and bioavailability of poorly water-soluble ritonavir.     

Preparation and Evaluation of Solid Dispersions of A New Antitumor Compound Based on Early-Stage Preparation Discovery Concept

Ensuring sufficient drug solubility is a crucial problem in pharmaceutical-related research. For water-insoluble drugs, various formulation approaches are employed to enhance the solubility and bioavailability of lead compounds. The goal of this study was to enhance the dissolution and absorption of a new antitumor lead compound, T-OA. Early-stage preparation discovery concept was employed in this study. Based on this concept, a solid dispersion system was chosen as the method of improving drug solubility and bioavailability. Solid dispersions of T-OA in polyvinylpyrrolidone (PVP) K30 were prepared by the solvent evaporation method. Dissolution testing determined that the ideal drug-to-PVP ratio was 1:5. X-ray diffraction, Fourier transform infrared spectroscopy, and differential scanning calorimetry were employed to confirm the formation of solid dispersions. Scanning electron microscopy demonstrated that T-OA was converted into an amorphous form. Both in vitro dissolution testing and the in vivo studies demonstrated that the solubility and bioavailability of T-OA were significantly improved when formulated in a solid dispersion with PVP. The dissolution rate of the T-OA/PVP solid dispersion was greatly enhanced relative to the pure drug, and the relative bioavailability of T-OA solid dispersions was found to be 392.0%, which is 4-fold higher than the pure drug.     

Development and in vitro evaluation of an oral floating matrix tablet formulation of diltiazem hydrochloride

The purpose of this research was to prepare a floating drug delivery system of diltiazem hydrochloride (DTZ). Floating matrix tablets of DTZ were developed to prolong gastric residence time and increase its bioavailability. Rapid gastrointestinal transit could result in incomplete drug release from the drug delivery system above the absorption zone leading to diminished efficacy of the administered dose. The tablets were prepared by direct compression technique, using polymers such as hydroxypropylmethylcellulose (HPMC, Methocel K100M CR), Compritol 888 ATO, alone or in combination and other standard excipients. Sodium bicarbonate was incorporated as a gas-generating agent. The effects of sodium bicarbonate and succinic acid on drug release profile and floating properties were investigated. A 3² factorial design was applied to systematically optimize the drug release profile. The amounts of Methocel K100M CR (X₁) and Compritol 888 ATO (X₂) were selected as independent variables. The time required for 50% (t₅₀) and 85% (t₈₅) drug dissolution were selected as dependent variables. The results of factorial design indicated that a high level of both Methocel K100M CR (X₁) and Compritol 888 ATO (X₂) favors the preparation of floating controlled release of DTZ tablets. Comparable release profiles between the commercial product and the designed system were obtained. The linear regression analysis and model fitting showed that all these formulations followed Korsmeyer and Peppas model, which had a higher value of correlation coefficient (r). While tablet hardness had little or no effect on the release kinetics and was found to be a determining factor with regards to the buoyancy of the tablets. Published: September 7, 2007     

Response surface optimization of polysaccharides extraction from liriope roots and its modulatory effect on sjogren syndrome

The response surface methodology (RSM) was employed to study the extraction of liriope polysaccharides. The maximum extraction rate (64.1%) of liriope polysaccharides obtained by using the above optimised concentrations of the variables was extraction time (X₁) at 185 min, ratio of liquid to solid (X₂) at 11, and extraction temperature (X₃) at 94 °C. Forty male Wistar rats were used in the present experiment. After 2 weeks of acclimatization, animals were divided into 5 equal groups: control, SS model and 3 polysaccharides-treatment groups. Rats were orally administered their respective doses every day for 6 weeks. Liriope polysaccharides significantly increased the amount of salivary secretion, and the relative weight of spleen, thymus and submandibular glands. Therefore, the present results revealed that liriope polysaccharides exert a protective effect against tissue damage in rats with sjogren syndrome (SS).     

Gastroretentive drug delivery system of ranitidine hydrochloride: Formulation and in vitro evaluation

The purpose of this research was to prepare a gastroretentive drug delivery system of ranitidine hydrochloride. Guar gum, xanthan gum, and hydroxypropyl methylcellulose were evaluated for gel-forming properties. Sodium bicarbonate was incorporated as a gas-generating agent. The effects of citric acid and stearic acid on drug release profile and floating properties were investigated. The addition of stearic acid reduces the drug dissolution due to its hydrophobic nature. A 3² full factorial design was applied to systemically optimize the drug release profile. The amounts of citric acid anhydrous (X₁) and stearic acid (X₂) were selected as independent variables. The times required for 50% (t₅₀) and 80% drug dissolution (t₈₀), and the similarity factor f₂ were selected as dependent variables. The results of the full factorial design indicated that a low amount of citric acid and a high amount of stearic acid favors sustained release of ranitidine hydrochloride from a gastroretentive formulation. A theoretical dissolution profile was generated using pharmacokinetic parameters of ranitidine hydrochloride. The similarity factor f₂ was applied between the factorial design batches and the theoretical dissolution profile. No significant difference was observed between the desired release profile and batches F2, F3, F6, and F9. Batch F9 showed the highest f2 (f2=75) among all the batches, and this similarity is also reflected in t₅₀ (∼214 minutes) and t₈₀ (∼537 minutes) values. These studies indicate that the proper balance between a release rate enhancer and a release rate retardant can produce a drug dissolution profile similar to a theoretical dissolution profile.     

Gastroretentive drug delivery system of carbamazepine: Formulation optimization using simplex lattice design: A technical note

Summary and Conclusion  An attempt was made to develop a gastroretentive drug delivery system of carbamazepine using HPMC, sodium bicarbonate, and EC as matrixing agent, gas-generating agent, and floating enhancer, respectively. A simplex lattice design was applied to investigate the combined effect of 3 formulation variables (ie, amount of HPMC (X ₁), EC (X ₂), and sodium bicarbonate (X ₃). Results of multiple regression analysis indicated that low levels ofX ₁ andX ₂ and a high level ofX ₃ should be used to manufacture the tablet formulation with desired in vitro floating time and dissolution. Formulation S3 was selected as a promising formulation and was found stable at 40°C temperature and 75% RH for 3 months. Published: February 9, 2007     

Physicochemical Investigations and Stability Studies of Amorphous Gliclazide

Gliclazide (GLI), a poorly water-soluble antidiabetic, was transformed into a glassy state by melt quench technique in order to improve its physicochemical properties. Chemical stability of GLI during formation of glass was assessed by monitoring thin-layer chromatography, and an existence of amorphous form was confirmed by differential scanning calorimetry and X-ray powder diffractometry. The glass transition occurred at 67.5°C. The amorphous material thus generated was examined for its in vitro dissolution performance in phosphate buffer (pH 6.8). Surprisingly, amorphous GLI did not perform well and was unable to improve the dissolution characteristics compared to pure drug over entire period of dissolution studies. These unexpected results might be due to the formation of a cohesive supercooled liquid state and structural relaxation of amorphous form toward the supercooled liquid region which indicated functional inability of amorphous GLI from stability point of view. Hence, stabilization of amorphous GLI was attempted by elevation of T_g via formation of solid dispersion systems involving comprehensive antiplasticizing as well as surface adsorption mechanisms. The binary and ternary amorphous dispersions prepared with polyvinylpyrrolidone K30 (as antiplasticizer for elevation of T_g) and Aerosil 200® and/or Sylysia® 350 (as adsorbent) in the ratio of 1:1:1 (w/w) using kneading and spray-drying techniques demonstrated significant enhancement in rate and extent of dissolution of drug initially. During accelerated stability studies, ternary systems showed no significant reduction in drug dissolution performance over a period of 3 months indicating excellent stabilization of amorphous GLI.Key words: amorphous, gliclazide, solid dispersion, stability studies, T_g     

六盘山南坡华北落叶松人工林冠层LAI的坡面尺度效应

叶面积指数(LAI)是评价森林的生长、结构及众多服务功能的重要参数,受坡面上环境条件变化影响而有坡面变化与尺度效应,对此需要深入理解和精细刻画。在六盘山半湿润区香水河小流域选择了33年生华北落叶松人工林的一个斜坡长480.6m、水平长398.2m的东南坡向的典型坡面,在整个坡面上建立了宽30 m的调查样带,均匀分为空间连续的16个样地,在2014年生长季中期测定了林冠层LAI,并分析其坡面变化规律。结果表明:林冠层LAI存在明显的坡面差异,其坡面平均值为3.11,变化在2.66—3.49,变幅为0.83,变异系数为0.09;LAI总体上随着从坡顶向下的坡长增加呈波动性增大趋势,在坡面中部(水平坡长188.45 m时)达到最大,之后稍微减小。森林冠层LAI存在着坡面空间尺度效应,即冠层LAI的顺坡滑动平均值(Y_1)随水平坡长(X,m)增加而逐渐增大,平均每100 m升高0.12,其回归关系式为:Y_1=-2×10~(-8)X~3+8×10~(-6)X~2+5×10~(-4)X+2.6523,(R~2=0.99);各样地LAI与整个坡面平均值的比值(Y_2,小数)随水平坡长(X_1,m)增加呈现为波动性的非线性变化,其回归关系式为:Y_2=-9×10~(-9)X_1~3+2×10~(-6)X_1~2+1×10~(-3)X1+0.829,(R~2=0.78),可基于此式将特定坡位样地的实测LAI推算整个坡面的估计值。造成研究坡面上LAI坡位变化的主要原因是不同坡位(海拔)样地的气温与土壤含水量的差异。     

Wetting Kinetics: an Alternative Approach Towards Understanding the Enhanced Dissolution Rate for Amorphous Solid Dispersion of a Poorly Soluble Drug

Developing amorphous solid dispersions of water-insoluble molecules using polymeric materials is a well-defined approach to improve the dissolution rate and bioavailability. While the selected polymer plays a vital role in stabilizing the amorphous solid dispersion physically, it is equally important to improve the dissolution profile by inhibiting crystallization from the supersaturated solution generated by dissolution of the amorphous material. Furthermore, understanding the mechanism of dissolution rate enhancement is of vital importance. In this work, wetting kinetics was taken up as an alternative approach for understanding the enhanced dissolution rate for amorphous solid dispersion of a poorly soluble drug. While cilostazol (CIL) was selected as the model drug, povidone (PVP), copovidone, and hypromellose (HPMC) were the polymers of choice. The concentrations against time profiles were evaluated for the supersaturated solutions of CIL in the presence and absence of the selected polymers. The degree of supersaturation increased significantly with increase in polymer content within the solid dispersion. While povidone was found to maintain the highest level of supersaturation for the greatest length of time both in dissolution and solution crystallization experiments, copovidone and hypromellose were found to be the less effective as crystallization inhibitor. The ability of polymers to generate and maintain supersaturated drug solutions was assessed by dissolution studies. The wetting kinetics was compared against the solid dispersion composition to establish a correlation with enhanced dissolution rate.KEY WORDS: Cilostazol, Crystallization inhibition, Solid dispersions, Supersaturated solutions, Wetting kinetics