Gene cloning,overexpression and characterization of a novel organic solvent tolerant and thermostable lipase from Galactomyces geotrichum Y05

Although the lipase of Geotrichum candidum has been extensively reported, little attention has been focused on molecular genetic and biochemical characterizations of Galactomyces geotrichum lipases. A lipase gene from G. geotrichum Y05 was cloned from both genomic DNA and cDNA sources. Nucleotide sequencing revealed that the ggl gene has an ORF of 1692 bp without any introns, encoding a protein of 563 amino acid residues, including a potential signal sequence of 19 amino acid residues. The amino acid sequence of this lipase showed 86% identity to lipase of Trichosporon fermentans WU-C12. The mature lipase gene was subcloned into pPIC9K vector, and overexpressed in methylotrophic Pichia pastoris GS115. Active lipase was accumulated to the level of 100.0 U/ml (0.4 mg/ml) in the shake-flask culture, 10.4-fold higher than the activity of the original strain (9.6 U/ml). This yield dramatically exceeds that previously reported with 23–50 U/ml, 0.06 mg/ml and 0.2 mg/ml. The purified lipase exhibited several properties of significant industrial importance, such as pH and temperature stability, wide organic solvent tolerance and broad hydrolysis on vegetable oils. Such a combination of properties makes it a promising candidate for its application in non-aqueous biocatalysis, such as biodiesel production, selective hydrolysis or esterification for enrichment of PUFAs and oil-contaminated biodegradation, which have been drawn considerable attention currently.     

Cloning of Wap65 in sea bass (Dicentrarchus labrax) and sea bream (Sparus aurata) and expression in sea bass tissues

The complementary DNA encoding WAP65 protein was cloned from the liver of two fish species sea bass (Dicentrarchus labrax) and sea bream (Sparus aurata). Full-length cDNA sequences were obtained from reverse transcribed total RNA, followed by 5′ and 3′ rapid amplification of cDNA end (RACE) experiments. The full-length cDNA sequence of D. labrax is 1709 bp and the coding sequence is flanked by a 67 bp 5′-UTR and a 358 bp 3′-UTR. The full-length cDNA sequence of S. aurata is 1599 bp, and the coding sequence is flanked by a 48 bp 5′-UTR and a 273 bp 3′-UTR. The deduced amino acid putative primary sequences are composed of 427 and 425 amino acid residues for D. labrax and S. aurata, respectively. They display high homologies with previously described fish WAP65 and other hemopexin-like proteins from rabbit (Oryctolagus cuniculus). Expression of Wap65 has proved to be a natural physiological adaptive answer of teleost fish to warm temperature acclimation. In all fish species studied to date, Wap65 was found expressed mainly by the liver, although other tissues seem able to express Wap65 in response to a warm temperature acclimation, in a specie specific manner. Here, we investigate the tissue specific expression of Wap65 in D. labrax and S. aurata in response to a warm temperature acclimation, by RT-PCR analysis.     

Homologous expression,purification and characterization of a novel high-alkaline and thermal stable lipase from Burkholderia cepacia ATCC 25416

The lipase secreted by Burkholderia cepacia ATCC 25416 was particularly attractive in detergent and leather industry due to its specific characteristics of high alkaline and thermal stability. The lipase gene (lipA), lipase chaperone gene (lipB), and native promoter upstream of lipA were cloned. The lipA was composed of 1095 bp, corresponding to 364 amino acid residues. The lipB located immediately downstream of lipA was composed of 1035 bp, corresponding to 344 amino acid residues. The lipase operon was inserted into broad host vector pBBRMCS1 and electroporated into original strain. The homologous expression of recombinant strain showed a significant increase in the lipase activity. LipA was purified by three-step procedure of ammonium sulfate precipitation, phenyl-sepharose FF and DEAE-sepharose FF. SDS-PAGE showed the molecular mass of the lipase was 33 kDa. The enzyme optimal temperature and pH were 60 °C and 11.0, respectively. The enzyme was stable at 30–70 °C. After incubated in 70 °C for 1 h, enzyme remained 72% of its maximal activity. The enzyme exhibited a good stability at pH 9.0–11.5. The lipase preferentially hydrolyzed medium-chain fatty acid esters. The enzyme was strongly activated by Mg²⁺, Ca²⁺, Cu²⁺, Zn²⁺, Co²⁺, and apparently inhibited by PMSF, EDTA and also DTT with SDS. The enzyme was compatible with various ionic and non-ionic surfactants as well as oxidant H₂O₂. The enzyme had good stability in the low- and non-polar solvents.     

Codon optimization through a two-step gene synthesis leads to a high-level expression of Aspergillus niger lip2 gene in Pichia pastoris

Aspergillus niger lipases are important biocatalysts for a broad range of industrial applications. To enhance the expression level of a newly cloned lipase gene lip2 of A. niger in Pichia pastoris, we applied codon optimization and synthesized the full length codon-optimized gene by a two-step gene synthesis strategy. This strategy consists of an assembly PCR for several small DNA fragments and enzymatic digestion and ligation steps to ligate these fragments into the full-length gene. First, the full-length lip2 gene was divided into three fragments F1 (237 bp), F2 (238 bp) and F3 (422 bp) with the additions of proper restriction sites, and separately amplified by assembly PCR reactions. Second, three PCR amplified fragments were digested and ligated into the full-length lip2 gene. In the two-step gene synthesis, synthesis of smaller DNA fragments resulted in a significant lower level of nonspecific mismatching among oligonucleotides and a very low mutational rate of the PCR products, demonstrating the superiority of the method. When compared with the originally cloned lip2 gene of A. niger, the new codon optimized lip2 gene expressed at a significantly higher level in yeasts after methanol induction for 72 h, and both the enzyme activity and protein content reached maximal levels of 191 U/ml and 154 mg/1, with 11.6- and 5.3-fold increases, respectively.     

Expression of allograft inflammatory factor-1 (AIF-1) in response to bacterial challenge and tissue injury in the pearl oyster,Pinctada martensii

Allograft inflammatory factor-1 (AIF-1), an interferon (IFN)-γ-inducible calcium-binding cytokine, is associated with the inflammatory response and defense. We cloned and analyzed the expression pattern of the AIF-1 gene of the pearl oyster Pinctada martensii, hereafter designated PmAIF-1. The full-length PmAIF-1 cDNA is 946 bp in length and consists of a 5′-untranslated region (UTR) of 120 bp, a 3′-UTR of 376 bp, and an open reading frame (ORF) of 450 bp encoding a polypeptide of 149 amino acids with an estimated molecular mass of 17 kDa. Sequence analysis reveals that PmAIF-1 contains two EF hand Ca⁺²-binding motifs like those in previously characterized AIF-1s while alignment with known AIF-1 protein sequences reveals higher similarity to invertebrate orthologs than to those of vertebrates.Quantitative PCR analysis reveals that PmAIF-1 is constitutively expressed, with the highest expression detected in hemocytes, and the expression level of PmAIF-1 mRNA was significantly up-regulated in hemocytes, gill, digestive gland under bacterial challenge and tissue injury. After challenged by gram-negative bacteria Vibrio alginolyticus and Vibrio parahaemolyticus, gram-positive bacteria Bacillus subtilis, the expression level of this gene in hemocytes were all up-regulated and reached the maximum point at 12 h (5.80 folds, P < 0.01), 6 h (5.02 folds, P < 0.01) and 12 h (5.49 folds, P < 0.01), respectively. Under shell damage and mantle injury, PmAIF-1 mRNA increased gradually in the first 3 h and reached a peak of expression at 6 h post-injury. These findings suggest that PmAIF-1 is an acute-response protein involved in the innate immune responses of pearl oysters, and provide general information about the mechanisms of innate immune defense against bacterial infection in pearl oysters.     

Thermophilic lipase from Thermomyces lanuginosus: Gene cloning,expression and characterization

An extracellular lipase gene ln1 from thermophilic fungus Thermomyces lanuginosus HSAUP₀₃80006 was cloned through RT-PCR and RACE amplification. Its coding sequence predicted a 292 residues protein with a 17 amino acids signal peptide. The deduced amino acids showed 78.4% similarity to another lipase lgy from T. lanuginosus while shared low similarity with other fungi lipases. Higher frequencies hydrophobic amino acids related to lipase thermal stability, such as Ala, Val, Leu and Gly were observed in this lipase (named LN). The sequence, -Gly-His-Ser-Leu-Gly-, known as a lipase-specific consensus sequence of mould, was also found in LN. High level expression for recombinant lipase was achieved in Pichia pastoris GS115 under the control of strong AOX1 promoter. It was purified to homogeneity through only one step DEAE-Sepharose anion exchange chromatography and got activity of 1328 U/ml. The molecular mass of one single band of this lipase was estimated to be 33 kDa by SDS-PAGE. The enzyme was stable at 60 °C and kept 65% enzyme activity after 30 min incubation at 70 °C. It kept half-activity after incubated for 40 min at 80 °C. The optimum pH for enzyme activity was 9.0 and the lipase was stable from pH 8.0 to 12.0. Lipase activity was enhanced by Ca²⁺ and inhibited by Fe²⁺, Zn²⁺, K⁺, and Ag⁺. The cell-free enzyme hydrolyzed and synthesized esters efficiently, and the synthetic efficiency even reached 81.5%. The physicochemical and catalytic properties of the lipase are extensively investigated for its potential industrial applications.     

A dynein heavy chain homologue gene in Hexamita inflata

A gene encoding an unusually small dynein heavy chain homologue, hDYHH, was cloned from the genome of a free-living diplomonad, Hexamita inflata (Hi). The open reading frame (ORF) of hDYHH is 867 bp and encodes a polypeptide of 289 amino acids (aa), hDYHH. hDYHH is homologous to the region around the third P-loop ATP-binding site of several dynein heavy chain polypeptides that are around 4000 aa. Northern blot analysis showed that hDYHH is expressed in vivo and that the mRNA length (approximately 1.8 kb) is consistent with the gene length (1.67 kb). Southern blot analysis indicated that there are hDYHH homologues within the Hi genome, possibly including a longer dynein heavy chain gene. An hDYHH homologue was also identified in Hexamita pusilla (Hp). hDYHH is the first full-length protein-encoding gene cloned from Hexamita.     

Identification of a new tumour-associated antigen TM4SF5 and its expression in human cancer

In a previous large-scale screening for differentially expressed genes in pancreatic cancer, a gene was identified that was highly overexpressed in pancreatic cancer encoding a novel putative tetraspan transmembrane protein highly homologous to the tumour-associated antigen L6. Using a radiation hybrid panel the identified human gene named TM4SF5 (transmembrane 4 superfamily member 5) was localized to chromosome 17 in the region 17p13.3. The cloned TM4SF5 cDNA has a 32 bp 5′-untranslated region (UTR), a 591 bp openreading frame (ORF) and a 85 bp 3′UTR. The predicted TM4SF5 protein with 197 amino acids contains three NH₂-terminal hydrophobic transmembrane regions, followed by an extracellular hydrophilic domain containing two potential N-linked glycosylation sites and a COOH-terminal hydrophobic transmembrane region. These structural features are shared by the L6 antigen and a number of related cell surface proteins associated with cell growth. TM4SF5 was overexpressed in pancreatic cancer tissues as compared to both normal pancreas and chronic pancreatitis tissues, and was detected at high levels in other tumour tissues. Although the precise function of TM4SF5 remains to be elucidated it may be useful in a clinical setting for tumour diagnosis and/or therapy. This hypothesis is supported by the strong homology to the L6 antigen, which has proved promising in immunological, therapeutic and diagnostic approaches.     

Combined strategies for improving the heterologous expression of an alkaline lipase from Acinetobacter radioresistens CMC-1 in Pichia pastoris

In this study, a series of strategies was developed to enhance the expression of an alkaline lipase from Acinetobacter radioresistens (ARL) in Pichia pastoris. Activity of the lipase from recombinant strain carrying a single copy of codon-optimized ARL gene was 65 U/mL in shake flask culture with p-nitrophenyl caprylate as the substrate. The lipase yield was increased to 104 U/mL by introducing a short N-extension spacer peptide coding for the 10 amino acids (EEAEAEAEPK) between α-factor signal peptide and ARL. The N-terminal extension spacer did not affect the pH or temperature properties of the recombinant ARL. After the multi-copy constructs were identified by Q-PCR assay, a higher lipase activity of 180 U/mL was obtained. Further introduction of the spliced HAC1 gene into multi-copy integrants (>6 copies) extensively enhanced the ARL yield by 30–40%. As a result, the ARL yield reached 1.06 × 10⁴ U/mL in a 10-L scaled-up fed-batch fermenter as well as the lipase showed some better properties compared to that wild one from A. radioresistens.     

Gene cloning and expression of a detergent stable alkaline protease from Aspergillus clavatus ES1

The genes, cDNA alpES1 and alpES1, encoding Aspergillus clavatus ES1 alkaline protease were amplified from complementary DNA (cDNA) and genomic DNA, respectively, cloned in pCR^®II-TOPO plasmid and then sequenced. Sequence analysis of the cDNA alpES1 gene revealed an open reading frame (ORF) of 1212 bp encoding a pre–pro-protein of 403 amino acid residues consisting of a 21-aa signal peptide, a 100-aa pro-peptide and a 282-aa mature protein with a calculated molecular weight of 28.5 kDa. Compared to the cDNA alpES1 gene, the alpES1 gene contained three introns, which had 53, 57 and 54 bp, respectively. The cDNA alpES1 gene was then sub-cloned in pET-30b(+) and expressed in Escherichia coli BL21 (λDE3). The purified recombinant protease had a molecular weight of about 32 kDa estimated by SDS-PAGE. Kinetic parameters, K_m and k_cat values of the recombinant AlpES1 for casein, were 0.23 mM and 12.38 min⁻¹, respectively. The catalytic efficiency (k_cat/K_m) was 53.82 min⁻¹ mM⁻¹.     

Sequence analysis of a bacteriocinogenic plasmid of Clostridium butyricum and expression of the bacteriocin gene in Escherichia coli

A small cryptic plasmid, namely, pCBM588, was obtained from Clostridium butyricum MIYAIRI 588 (CBM588) — a bacterium used in probiotics. The complete sequence of pCBM588 was determined. The size of pCBM588 was 8060 bp and the G + C content was 24.3%. Nine open reading frames (ORFs) were predicted, and ORF3 showed significant homologies with a structural bacteriocin gene of Clostridium tyrobutyricum. The putative bacteriocin gene was inserted into the pET21d expression vector in frame; it was expressed as a His-tagged recombinant protein in Escherichia coli BL21 (DE3). A total of 10240 AU of the recombinant bacteriocin were purified from 100 ml of E. coli culture. The bacteriocin was cleaved into 2 portions, and the small C-terminal polypeptide consisting of 83 amino acids possessed bactericidal activity. These results demonstrated that the ORF3 of pCBM588 encoded a bacteriocin, which is identical or very similar to the previously reported butyricin 7423.     

Molecular cloning and characterization of thermostable esterase and lipase from Geobacillus thermoleovorans YN isolated from desert soil in Egypt

Genes encoding an esterase (EstA) and lipase (LipA) from Geobacillus thermoleovorans YN, a strain isolated from Egyptian desert soil, were cloned and the respective proteins were expressed in Escherichia coli and characterized. Whereas LipA was cloned directly by PCR amplification from genomic DNA, a genomic library composed of 3000 clones was screened on tributyrin agar plates to find EstA. An open reading frame of 744 bps encoding a polypeptide of 247 amino acid residues was identified as esterase due to its conserved GXSXG motif and its high similarity toward other carboxyl esterases. LipA (416 aa residues) is encoded by an ORF of 1251 bps and constitutes a pre-protein with a calculated molecular mass of 46 kDa including a signal sequence of 28 aa resulting in a mature lipase of 43 kDa. Both, LipA and EstA were sub-cloned and expressed under control of the temperature-inducible λ-promoter and purified by IMAC and gel filtration. The molecular mass of the purified EstA was 29 kDa. Both enzymes were most active at pH ∼9.5 and remarkably stable at pH 5 and 10.5. Temperature optima and stabilities (up to 70 °C) of both enzymes as well as their reaction kinetics and substrate spectra were determined.     

Rhizopus chinensis lipase: Gene cloning,expression in Pichia pastoris and properties

Lipases are the most attractive enzymes for use in organic chemical processes. In our previous studies, a lipase from Rhizopus chinensis CCTCC M20102 was found to have very high ability of esterification of short-chain fatty acids with ethanol. In this study, we reported the cloning and expression of the lipase gene from R. chinensis in Pichia pastoris and characterization of the recombinant lipase. The lipase gene without its signal sequence were cloned downstream to the alpha-mating factor signal and expressed in P. pastoris GS115 under the control of AOX1 promoter. In the induction phase, two bands of 37 kDa and 30 kDa proteins could be observed. The amino-terminal analysis showed that the 37-kDa protein was the mature lipase (30 kDa) attached with 27 amino acid of the carboxy-terminal part of the prosequence (r27RCL). The pH and temperature optimum of r27RCL and mRCL were pH 8.5 and 40 °C, and pH 8 and 35 °C, respectively. The stability, reaction kinetics and effects of metal ions and other reagents were also determined. The chain length specificity of r27RCL and mRCL showed highest activity toward p-nitrophenyl hexanoate or glyceryl tricaproate (C6) and p-nitrophenyl acetate or glyceryl triacetate (C2), respectively. This property is quite rare among lipases and gives this new lipase great potential for use in the field of biocatalysis.     

Heterologous expression and characterisation of a biosynthetic thiolase from Clostridium butyricum DSM 10702

Biosynthetic thiolases (EC 2.3.1.9) are key enzymes in the branched catabolism of diverse clostridia as their activity and regulation influence the production of organic acids and solvents. In Clostridium butyricum, they are also involved in the production of hydrogen as a sustainable and environmentally benign energy source. In this study, the gene coding for thiolase from C. butyricum DSM 10702 was cloned by genome walking. It was found to consist of 1179 bp coding for a protein with 393 amino acids and a deduced molecular weight of 41.4 kDa. The enzyme was fused to an N-terminal his-tag, expressed in Escherichia coli, purified to near homogeneity and characterised for biochemical and kinetic properties. Gel filtration chromatography revealed that the catalytically active enzyme consists of a homotetramer. The enzyme showed a K_M of ～32 μM towards acetoacetyl-CoA and of ～21 μM towards CoASH at 30 °C and pH 8.0. Claisen condensation of acetyl-CoA by thiolase was analysed in a coupled enzyme assay, where β-hydroxybutyryl-CoA dehydrogenase was applied catalysing the subsequent NADH-dependant reduction of the formed condensation product acetoacetyl-CoA. For this purpose the latter enzyme was cloned from C. butyricum DSM 10702 and recombinantly expressed in E. coli. The K_M of thiolase towards acetyl-CoA was ～674 μM at 30 °C and pH 7.5. Acetyl-CoA condensation was inhibited even at micromolar concentrations of CoASH indicating that CoASH has an important regulatory function in vivo.     

Complete nucleotide sequence and organization of the mitochondrial genome of eri-silkworm,Samia cynthia ricini (Lepidoptera: Saturniidae)

Samia cynthia ricini is a commercial silk-producing insect that is now reared year-round in Korea, with the expectation of being utilized for diverse purposes. In this report, we present the complete mitochondrial genome (mitogenome) of S. c. ricini. The 15,384-bp long S. cynthia ricini mitogenome was amplified into 26 short fragments using three long overlapping fragments using primers designed from reported lepidopteran mitogenome sequences. The genome comprises 37 genes (13 protein-coding genes, two rRNA genes, and 22 tRNA genes), and one large non-coding region termed the A + T-rich region. The A/T content of the third codon position was 91.7%, which was 18.8% and 21.6% higher than those of first and second codon positions, respectively. The high A/T content in the genome is reflected in codon usage, accounting for 39.5% of A/T-composed codons (TTA, ATT, TTT, and ATA). Unlike a previous report on the start codon for the COI gene, the S. c. ricini COI gene commences with a typical ATT codon. A total of 221 bp of non-coding sequences are dispersed in 17 regions, ranging in size from 1 to 54 bp, which comprise 1.4% of the total genome. One of the non-coding sequence located between tRNA^Gln and ND2 (54 bp) has 77% sequence homology with the 5′-sequence of the neighboring ND2 gene, suggesting partial duplication of the sequence during evolution. The 361-bp long A + T-rich region contains an 18 bp-long poly-T stretch, ATAGA motif, ATTTA element, microsatellite-like A/T sequence, poly-A stretch and one tRNA-like sequence, as typically found in Lepidoptera including Bombycoidea.     

Molecular cloning and high-level expression of a β-galactosidase gene from Paecilomyces aerugineus in Pichia pastoris

A β-galactosidase gene (designated PaGalA) was cloned for the first time from Paecilomyces aerugineus and expressed in Pichia pastoris under the control of the AOX1 promoter. The coding region of 3036 bp encoded a protein of 1011 amino acids with a deduced molecular mass of 108.7 kDa. The PaGalA without the signal peptide was cloned into a vector pPIC9K and was expressed successfully in P. pastoris as active extracellular β-galactosidase. The recombinant β-galactosidase (PaGalA) was secreted into the medium at an extremely high levels of 22 mg ml⁻¹ having an activity of 9500 U ml⁻¹ from high density fermentation culture, which is by far the highest yield obtained for a β-galactosidase. The purified enzyme with a high specific activity of 820 U mg⁻¹ had a molecular mass of 120 kDa on SDS-PAGE. PaGalA was optimally active at pH 4.5 and a temperature of 60 °C. The recombinant β-galactosidase was able to hydrolyze lactose efficiently at pH 5.0 and 50 °C. It also possessed transglycosylation activities at high concentrations of lactose. PaGalA exhibited better lactose hydrolysis efficiency in whey than two other widely used commercial lactases. The extremely high expression levels coupled with favorable biochemical properties make this enzyme highly suitable for commercial purposes in the hydrolysis of lactose in milk or whey.