Synthesis,structures and characterization of the dinuclear nickel(II) complexes containing N,N,N′,N′-tetrakis[(1-ethyl-2-benzimidazolyl)methyl]-2-hydroxy-1,3-diaminopropane and an azide ion

Two dinuclear nickel(II) complexes, [Ni₂(L-Et)(N₃)(H₂O)₃](NO₃)₂ · 2H₂O (1) and [Ni₂(L-Et)(μ-1,3-N₃)(H₂O)₂](NO₃)₂ · 4H₂O (2) containing (HL-Et = N,N,N′,N′-tetrakis[(1-ethyl-2-benzimidazolyl)methyl]-2-hydroxy-1,3-diaminopropane), have been synthesized and characterized by their IR and UV–Vis spectra and magnetic susceptibilities. The crystal structures of [Ni₂(L-Et)(N₃)(H₂O)₃](NO₃)₂ · CH₃OH (1′) and [Ni₂(L-Et)(μ-1,3-N₃)(H₂O)₂](NO₃)₂ · 2C₂H₅OH (2′) similar to 1 and 2 were determined by X-ray crystallography. In 1′, the two nickel(II) ions are bridged by only an alkoxo group of L-Et⁻, while an azido and an alkoxo connect two nickel(II) ions in 2′. Magnetic susceptibility measurements (2–300 K) showed a weak ferromagnetic exchange coupling between the two nickel(II) ions (2J = 10.1 cm⁻¹) for 1. On the other hand, antiferromagnetic interactions were observed for 2 (2J = −15.8 cm⁻¹).     

A novel fibrinolytic protease from Streptomyces sp. CS684

A fibrinolytic protease (FP84) was purified from Streptomyces sp. CS684, with the aim of isolating economically viable enzyme from a microbial source. SDS-PAGE and fibrin zymography of the purified enzyme showed a single protein band of approximately 35 kDa. Maximal activity was at 45 °C and pH 7–8, and the enzyme was stable between pH 6 and 9 and below 40 °C. It exhibited fibrinolytic activity, which is stronger than that of plasmin. FP84 hydrolyzed Bβ-chains of fibrinogen, but did not cleave Aα- and γ-chains. K_m, V_max and K_cat values for azocasein were 4.2 mg ml⁻¹, 305.8 μg min⁻¹ mg⁻¹ and 188.7 s⁻¹, respectively. The activity was suppressed by Co²⁺, Zn²⁺, Cu²⁺ and Fe²⁺, but slightly enhanced by Ca²⁺ and Mg⁺². Additionally, the activity was slightly inhibited by aprotinin and PMSF, but significantly inhibited by pefabloc, EDTA and EGTA. The first 15 amino acids of N-terminal sequence were GTQENPPSSGLDDID. They are highly similar to those of serine proteases from various Streptomyces strains, but different with known fibrinolytic enzymes. These results suggest that FP84 is a novel serine metalloprotease with potential application in thrombolytic therapy.     

Hydrothermal synthesis and structural characterization of an organic–inorganic hybrid material: (H2tptz)2[δ-Mo8O26]·2H2O (tptz=2,4,6-tripyridyltriazine)

The reaction of MoO₃ and 2,4,6-tripyridyltriazine (tptz) in water at 180°C for 48 h and pH 5.5 produces (H₂tptz)₂[Mo₈O₂₆]·2H₂O in 70% yield. The structure is constructed from δ-Mo₈O₂₆ ⁴⁻ clusters, H₂tptz²⁺ and H₃O⁺ cations linked through hydrogen bonding into a network. Crystal data: C₁₈H₁₆Mo₄N₆O₁₄; monoclinic P2₁/n; a=10.2225(5) Å, b=14.0072(6) Å, c=18.1154(8) Å, β=93.896(1)°, V=2587.9(2) Å³, Z=4, D_calc=2.372 g cm⁻³; R₁=0.0271 based on 3212 reflections.     

Magnetostructural correlations and catecholase-like activities of μ-alkoxo-μ-carboxylato double bridged dinuclear and tetranuclear copper(II) complexes

Two μ-alkoxo-μ-carboxylato bridged dinuclear copper(II) complexes, [Cu₂(L¹)(μ-HCO₂)] (1) ((H₃L¹ = 1,3-bis(5-bromosalicylideneamino)-2-propanol)), [Cu₂(L²)(μ-HCO₂)] · dmf (2) (H₃L² = 1,3-bis(3,5-chlorosalicylideneamino-2-propanol)), and two μ-alkoxo-μ-dicarboxylato doubly bridged tetranuclear copper(II) complexes, [{Cu₂(L³)}₂(μ-O₂C–C(CH₃)₂–CO₂)] · 5H₂O · 3CH₃OH (3) ((H₃L³ = 1,3-bis(salicylid-deneamino)-2-propanol)) and [{Cu₂(L³)}₂(μ- O₂CCH₂–C₆H₄–CH₂CO₂)] · 2H₂O (4) have been prepared and characterized. The single crystal X-ray analysis shows that the structures of complexes 1 and 2 are dimeric with two adjacent copper(II) atoms bridged by μ-alkoxo-μ-carboxylato ligands with the Cu⋯Cu distances and Cu–O(alkoxo)–Cu angles are 3.511 Å and 132.85° for 1, 3.517 Å and 131.7° for 2, respectively. Complexes 3 and 4 consist of μ-alkoxo-μ-dicarboxylato doubly bridged tetranuclear Cu(II) complexes with mean Cu–Cu distances and Cu–O–Cu angles of 3.158 Å and 108.05° for 3 and 3.081 Å and 104.76° for 4, respectively. Magnetic measurements reveal that 1 and 2 are strong antiferromagnetically coupled with 2J = −156 and −152 cm⁻¹, respectively, while 3 and 4 exhibit ferromagnetic coupling with 2J = 86 and 155.2 cm⁻¹, respectively. The 2J values of 1–4 are linearly correlated to the Cu–O–Cu angles. Dependence of the pH at 25 °C on the reaction rate of oxidation of 3,4-di-tert-butylcatechol (3,5-dtbc) to the corresponding quinone catalyzed by 1–4 was studied. Complexes 1–4 exhibit high catecholase-like activity at pH 9.0 and 25 °C for oxidation of 3,5-di-tert-butylcatechol.     

Expanding the 4,4′-bipyridine ligand: Structural variation in {M(pytpy)2}2+ complexes (pytpy = 4′-(4-pyridyl)-2,2′:6′,2″-terpyridine,M = Fe,Ni, Ru) and assembly of the hydrogen-bonded,one-dimensional polymer {[Ru(pytpy)(Hpytpy)]}n3n+

The solid state structures of [Ni(1)₂][NO₃]₂ · 2MeOH · 2H₂O, [Fe(1)₂][ClO₄]₂ · 2MeOH · 0.5H₂O, [Ru(1)₂][PF₆]₂ and [Ru(1)₂][PF₆][NO₃] (1 = 4′-(4-pyridyl)-2,2′:6′,2″-terpyridine) are presented and the structural variation observed for the {M(1)₂}²⁺ unit is discussed. Protonation of the pendant pyridine group in [Ru(1)₂]²⁺ leads to the formation of a hydrogen-bonded, one-dimensional polymer [{Ru(1)(H1)}_n]³ⁿ⁺ exemplifed by the solid-state structure of [{Ru(1)(H1)}{Fe(NCS)₆} · 1.25H₂O]_n.     

Enhancement of polysaccharide production in suspension cultures of protocorm-like bodies from Dendrobium huoshanense by optimization of medium compositions and feeding of sucrose

A strategy that optimization of medium compositions for maximum biomass followed by feeding of sucrose for maximum polysaccharide synthesis was developed for enhancing polysaccharide production in suspension culture of protocorm-like bodies (PLBs) of Dendrobium huoshanense C.Z. Tang et S.J. Cheng. In growth stage, the original half-strength MS medium was optimized with carbon sources, nitrogen sources and metal ion combinations. The effects of different carbon sources on PLBs growth were remarkable and sucrose at 35 g l⁻¹ was the most suitable. Sole nitrate nitrogen of 30 mmol l⁻¹ was the best for PLBs growth. Metal ions (Ca²⁺, Fe²⁺, Mn²⁺ and Zn²⁺) showed different influences on PLBs growth. The optimal concentration of Ca²⁺, Fe²⁺, Mn²⁺ and Zn²⁺ was 4.5 mmol l⁻¹, 0.1 mmol l⁻¹, 0.5 mmol l⁻¹ and 0.06 mmol l⁻¹, respectively. In the optimized medium (sucrose, nitrate, Ca²⁺, Fe²⁺, Mn²⁺ and Zn²⁺ concentration as described above, the other component concentration seen in half-strength MS), 33.9 g DW l⁻¹ PLBs were harvested after 30 days of culture and biomass increase was improved 245% as compared with that in the original medium. In production stage, polysaccharide synthesis was significantly improved by the feeding sucrose. The maximum polysaccharide production (22 g l⁻¹) was obtained in the case of 50 g l⁻¹ sucrose feeding at day 30 of culture, which was about 109-fold higher than that in the original medium without feeding of sucrose.     

Synthesis,crystal structures and properties of three rare earth substituted germanotungstates: M/[α-GeW11O39] (M = Nd,Eu, and Tb)

Three new polyoxometalate compounds based on the lacunary Keggin anion [α-GeW₁₁O₃₉]^8? and the rare earth cations (Ln = Nd^III, Eu^III, Tb^III), [(CH₃)₄N]_2.5H_7.5[Eu(GeW₁₁O₃₉)(H₂O)₂]₂ · 4.5H₂O (1), [(CH₃)₄N]₂H₈[Tb(GeW₁₁O₃₉)(H₂O)₂]₂ · 2.5H₂O (2) and [Nd_0.5(H₂O)₂]H_0.5[Nd₂(GeW₁₁O₃₉)(DMSO)₂(H₂O)₈] · 5.5H₂O (3), have been synthesized and characterized by elemental analysis, inductively coupled plasmas (ICP) analysis, IR spectroscopy, single-crystal X-ray diffraction. The solid-state structures of compounds 1 and 2 consist of one-dimensional linear wires built of [α-GeW₁₁O₃₉]^8? anions connected by Eu³⁺/Tb³⁺ cations, while in compound 3, the introduction of the organic molecules DMSO (DMSO = dimethyl sulphoxide) leads to a double-parallel chainlike structure constructed by two linear wires {[Nd(1)(GeW₁₁O₃₉)(DMSO)(H₂O)₂]^5?}_n linked by Nd³⁺ coordination cation. Furthermore, the luminescent property of compound 1 and the thermal stability of compound 3 were also studied.     

Hydrothermal syntheses and characterizations of two novel heteropolytungstate supported coordination compounds

Two novel heteropolytungstates, [Ni(2,2′-bpy)₃]_1.5{PW_10.79V_1.21O₄₀(VO)_0.5[Ni(2,2′-bpy)₂L]} · 0.5H₂O (1) (2,2′-bpy = 2,2′-bipyridine, L = 0.5H₂O + 0.5OH^?) and K[PW₁₂O₄₀[Ni(1,10-phen)₂(OH)]₂] · 2H₂O (2) (1,10-phen = 1,10-phenanthroline), have been synthesized under hydrothermal conditions and characterized by IR, XPS, and X-ray diffraction analyses. The polyoxoanion of 1 is a mono-capped α-Keggin cluster which supports a metal coordination fragment [Ni(2,2′-bpy)₂L]^1.5+, while the structure of 2 exhibits a 1D chain constructed from pseudo-Keggin cluster bi-supported transition metal complexes linked by K⁺ ions. Studies of magnetic properties indicated the presence of paramagnetic behaviours for compounds 1 and 2.     

Cloud point extraction-flame atomic absorption spectrometry for pre-concentration and determination of trace amounts of silver ions in water samples

A cloud point extraction (CPE) method was used as a pre-concentration strategy prior to the determination of trace levels of silver in water by flame atomic absorption spectrometry (FAAS) The pre-concentration is based on the clouding phenomena of non-ionic surfactant, triton X-114, with Ag (I)/diethyldithiocarbamate (DDTC) complexes in which the latter is soluble in a micellar phase composed by the former. When the temperature increases above its cloud point, the Ag (I)/DDTC complexes are extracted into the surfactant-rich phase. The factors affecting the extraction efficiency including pH of the aqueous solution, concentration of the DDTC, amount of the surfactant, incubation temperature and time were investigated and optimized. Under the optimal experimental conditions, no interference was observed for the determination of 100 ng·mL⁻¹ Ag⁺ in the presence of various cations below their maximum concentrations allowed in this method, for instance, 50 μg·mL⁻¹ for both Zn²⁺ and Cu²⁺, 80 μg·mL⁻¹ for Pb²⁺, 1000 μg·mL⁻¹ for Mn²⁺, and 100 μg·mL⁻¹ for both Cd²⁺ and Ni²⁺. The calibration curve was linear in the range of 1–500 ng·mL⁻¹ with a limit of detection (LOD) at 0.3 ng·mL⁻¹. The developed method was successfully applied for the determination of trace levels of silver in water samples such as river water and tap water.     

Crystal structure,magnetic and thermal properties of the one-dimensional complex [Nd(pzam)3(H2O)Mo(CN)8] · H2O

The new d–f cyanido-bridged 1D assembly [Nd(pzam)₃(H₂O)Mo(CN)₈] · H₂O was prepared by self-assembly of pyrazine-2-carboxamide (pzam), Nd(NO₃) · nH₂O and (Bu₃NH)₃[Mo(CN)₈] · 4H₂O in acetonitrile. X-ray crystallographic studies indicate that the complex comprises chains of alternating, cyanido-bridged [Nd(pzam)₃(H₂O)]³⁺ and Mo(CN)₈]^3? fragments. The magneto-structural properties have been studied by field-dependent magnetization and specific heat measurements at low temperatures (?0.3 K). Below ≈10 K the Nd(III) moment is well approximated by an effective spin S = 1/2, with anisotropic g-tensor. The exchange coupling between the Nd(III) and the Mo(V) spins S = 1/2 along the structural chains is found to be ferromagnetic, with J/k_B = 1.8 ± 0.2 K and approximately XY (planar) anisotropy. No evidence for 3D interchain magnetic ordering is found. A comparison with magneto-structural data of other cyanido-bridged complexes involving the Nd(III) ion is presented.     

[RuIII(medtra)(H2O)] (medtra = N-methylethylenediaminetriacetate) complex – A highly efficient NO inhibitor with low toxicity

Stopped-flow kinetic measurements were used to compare the reactivities of [Ru(medtra)(H₂O)] (medtra³⁻ = N-methylethylenediaminetriacetate) (1) and [Ru(hedtra)(H₂O)] (2) (hedtra³⁻ = N-hydroxyethylethylenediaminetriacetate) with NO in aqueous solution at 15 °C, pH 7.2 (phosphate buffer). The measured second-order rate constants (3 × 10³ and 6 × 10⁴ M⁻¹ s⁻¹ for 1 and 2, respectively) are three to four order of magnitudes lower than that for the reaction between [Ru^III(edta)(H₂O)]⁻ (3) with NO. However, NO scavenging studies of complexes 1–3, conducted by measuring the difference in nitrite production between treated and untreated murine macrophage cells, revealed that despite being less kinetically reactive toward NO, the [Ru(medtra)(H₂O)] complex exhibited the highest NO scavenging ability and lowest toxicity of compounds 1–3.     

Highly thermostable carbonic anhydrase from Persephonella marina EX-H1: Its expression and characterization for CO2-sequestration applications

The codon-optimized carbonic anhydrase gene of Persephonella marina EX-H1 (PMCA) was expressed and characterized. The gene with the signal peptide removed, PMCA(sp−), resulted in the production of approximately five times more purified protein than from the intact gene PMCA using an Escherichia coli expression system. PMCA(sp−) is formed as homo-dimer complex. PMCA(sp−) has a wide pH tolerance (optimum pH 7.5) and a high thermostability even at 100 °C (88 min of thermal deactivation half-life). The melting temperature for PMCA(sp−) was 84.5 °C. The apparent k_cat and K_m values for CO₂ hydration were 3.2 × 10⁵ s⁻¹ and 10.8 mM. The activity of the PMCA(sp−) enzyme was enhanced by Zn²⁺, Co²⁺, and Mg²⁺, but was strongly inhibited by Cu²⁺, Fe³⁺, Al³⁺, Pb²⁺, Ag⁺, and Hg²⁺. PMCA(sp−) readily catalyzed the hydration of CO₂, precipitating CaCO₃ as calcite in the presence of Ca²⁺.     

Syntheses and crystal structures of trimethyltin(IV) coordination polymers based on mixed ligands of 5-nitroisophthalate and 2,2′(4,4′)-bipy or phen

The trimethyltin(IV) polymer [(Me₃Sn)₂(nip) · EtOH]_n (1) of 5-nitroisophthalic acid (H₂nip) and its three derivatives with mixed organic N-donor ligands 2,2′-bipy [(Me₃Sn)₂(nip) · 2H₂O] · [(Me₃Sn)₂(nip) · H₂O] · 2(2,2′-bipy) (2) 4,4′-bipy {[(Me₃Sn)₂(nip)]₂(4,4′-bipy)}_n (3) or phen [(Me₃Sn)₂(nip) · H₂O] · (phen) (4) have been synthesized by the reaction of trimethyltin(IV) chloride and H₂nip when sodium ethoxide was added in the presence of 2,2′-bipy 4,4′-bipy or phen. All complexes 1–4 were characterized by elemental, IR, ¹H, ¹³C, and ¹¹⁹Sn NMR spectroscopy and X-ray crystallography analyses. Crystal, data collection and structure refinement parameters for complexes 1, 2, 3 and 4 are shown in Table 1, Table 2, respectively. The X-ray data showed the geometries of all the tin atoms in complexes 1–4 are trigonal bipyramidal. The X-ray analysis of 1 showed that the structure was a polymeric infinite chain with neighboring triorganotin centers being linked by dicarboxylate ligands and hydrogen bonds were found between adjacent chains. For 2, two different monomers were found, in one monomer, Me₃Sn were coordinated to both carboxyl groups of the ligand and water molecules were coordinated to the two Sn(IV) centers. In the other monomer, water molecules were coordinated to only one Sn center. Co-crystallized2,2′-bipy was found in 2 and a 2D supermolecular structure was formed via O–H⋯O and O–H⋯N (N atoms derived from 2,2′-bipy) hydrogen bonds. In 3 however, a 2D polymeric block was formed due to the inversion center of the 4,4′-bipy. For 4, due to the O–H⋯O and O–H⋯N (N atoms derived from phen) hydrogen bonds and intermolecular Sn⋯O bonds, a 2D polymeric structure was formed.     

Alkaline lipase from a novel strain Burkholderia multivorans: Statistical medium optimization and production in a bioreactor

An alkaline lipase from Burkholderia multivorans was produced within 15 h of growth in a 14 L bioreactor. An overall 12-fold enhanced production (58 U mL⁻¹ and 36 U mg⁻¹ protein) was achieved after medium optimization following the “one-variable-at-a-time” and the statistical approaches. The optimal composition of the lipase production medium was determined to be (% w/v or v/v): KH₂PO₄ 0.1; K₂HPO₄ 0.3; NH₄Cl 0.5; MgSO₄·7H₂O 0.01; yeast extract 0.36; glucose 0.1; olive oil 3.0; CaCl₂ 0.4 mM; pH 7.0; inoculum density 3% (v/v) and incubation time 36 h in shake flasks. Lipase production was maximally influenced by olive oil/oleic acid as the inducer and yeast extract as the additive nitrogen. Plackett–Burman screening suggested catabolite repression by glucose. Amongst the divalent cations, Ca²⁺ was a positive signal while Mg²⁺ was a negative signal for lipase production. RSM predicted that incubation time, inoculum density and oil were required at their higher levels (36 h, 3% (v/v) and 3% (v/v), respectively) while glucose and yeast extract were required at their minimal levels for maximum lipase production in shake flasks. The production conditions were validated in a 14 L bioreactor where the incubation time was reduced to 15 h.     

Effect of ligand congeniality on energy transfer reaction between photo-excited tris(bipyridine)ruthenium(II) and chromate(III) complexes in aqueous solutions

Energy-transfer rate-constants from photo-excited [Ru(N–N)₃]²⁺ (N–N = 2,2′-bipyridine (bpy), 4,4′-dimethyl-2,2′-bipyridine (4dmb), 5,5′-dimethyl-2,2′-bipyridine (5dmb)) to [Cr(O–O)₃]³⁻ (O–O²⁻ = ox²⁻ ((COO⁻)₂), mal²⁻ (CH₂(COO⁻)₂)) and [Cr(CN)₆]³⁻ in encounter complexes were evaluated in aqueous solutions containing alkali metal ion. The rate constant depends on the molecular size of the ruthenium(II) complex: 1.8 × 10⁸ s⁻¹ for [Ru(bpy)₃]²⁺ (molecular radius, r = 5.8 Å), 1.4 × 10⁸ s⁻¹ for [Ru(5dmb)₃]²⁺ (r = 6.1 Å) and 0.96 × 10⁸ s⁻¹ for [Ru(4dmb)₃]²⁺ (r = 6.7 Å) in the system of [Ru(N–N)₃]²⁺–[Cr(ox)₃]³⁻ in aqueous solution. However, the rate constant is much more sensitive to the chromate(III) complex than to ruthenium(II) complex; 1.8 × 10⁸ s⁻¹ and 0.43 × 10⁸ s⁻¹ for [Cr(ox)₃]³⁻ (r = 4.0 Å) and [Cr(mal)₃]³⁻ (r = 4.2 Å) in the [Ru(bpy)₃]²⁺–[Cr(O–O)₃]³⁻ systems, respectively. We conclude that the congeniality between the donor’s and acceptor’s ligands in encounter complex plays an important role in energy transfer in aqueous solution.     

A convenient preparation of pentaaquanitrosylchromium(2+) sulfate: The crystal structure revisited

The complex pentaaquanitrolsylchromium(2+) sulfate, [Cr(OH₂)₅(NO)]SO₄ has been prepared in a high yield by the hydrolysis of [Cr(NCCH₃)₅(NO)](BF₄)₂ in dilute sulfuric acid. Crystals of [Cr(OH₂)₅(NO)]SO₄ · H₂O have been grown and characterized by X-ray crystallography. Continuous photolysis of [Cr(NCCH₃)₅(NO)]²⁺ in acetonitrile solution with 404 nm light results in a release of NO with the quantum yield Φ = 0.55 mol einstein⁻¹ at 298 K with the resulting solvated Cr²⁺ ion being trapped by molecular dioxygen present in the solution.     

One- and two-dimensional copper benzenedicarboxylate coordination polymers incorporating the flexible tethering diimine N,N′-bis(3-pyridylmethyl)piperazine: Synthesis,structure, and thermal properties

A family of three copper benzenedicarboxylate coordination polymers has been constructed using the conformationally flexible and hydrogen-bonding capable tethering ligand N,N′-bis(3-pyridylmethyl)piperazine (3-bpmp). These three coordination polymers have been characterized via single crystal X-ray diffraction, infrared spectroscopy and elemental and thermogravimetric analysis. {[Cu(ph)(Hph)(H3-bpmp)(H₂O)] · 3H₂O} (1, ph = phthalate) manifests a 1-D chain motif held into a pseudo 3-D supramolecular structure through hydrogen bonding. While both {[Cu(ip)(3-bpmp)(H₂O)] · 2H₂O} (2, ip = isophthalate) and [Cu(tp)(3-bpmp)] (3, tp = terephthalate) exhibit 2-D (4,4) rhomboid grid-like layers, they possess different layer stacking patterns and supramolecular interactions due to coordination geometry variances.     

Adsorption characteristics of sulfur powder by bamboo charcoal to restrain sulfur allergies

Exposures to particulate matter with a diameter of 2.5 μm or less (PM2.5) may influence the risk of birth defects and make you allergic, which causes serious harm to human health. Bamboo charcoal can adsorb harmful substances,that was of benefitto people’s health. In order to figure out the optimal adsorbtion condition and the intrinsic change of bamboo charcoal, five chemicals were adsorbed by bamboo charcoal and were analyzed by FT-IR. The optimal blast time was 80 min of Na₂SO₃, 100 min of Na₂S₂O₈, 20 min of Na₂SO₄, 120 min of Fe₂(SO₄)₃ and 60 min or 100 min of S. FT-IR spectra showed that bamboo charcoal had five characteristic peaks of SS stretch, H₂O stretch, OH stretch, CO stretch or CC stretch, and NO₂ stretch at 3850 cm⁻¹, 3740 cm⁻¹, 3430 cm⁻¹, 1630 cm⁻¹ and 1530 cm⁻¹, respectively. For Na₂SO₃, the peaks at 3850 cm⁻¹, 3740 cm⁻¹, 3430 cm⁻¹, 1630 cm⁻¹ and 1530 cm⁻¹ achieved the maximum at 20 min. For Na₂S₂O₈, the peaks at 3850 cm⁻¹, 3740 cm⁻¹, 3430 cm⁻¹ and 1530 cm⁻¹ achieved the maximum at 40 min. For Na₂SO₄, the peaks at 3850 cm⁻¹, 3740 cm⁻¹ and 1530 cm⁻¹ achieved the maximum at 40 min. For Fe₂(SO₄)₃, the peaks at 3850 cm⁻¹, 3740 cm⁻¹, 1630 cm⁻¹ and 1530 cm⁻¹ achieved the maximum at 120 min. For S, the peaks at 3850 cm⁻¹ and 3740 cm⁻¹ achieved the maximum at 40 min, the peaks at 1630 cm⁻¹ and 1530 cm⁻¹ achieved the maximum at 40 min. It proved that bamboo charcoal could remove sulfur powder from air to restrain sulfur allergies.     

Tuning magnetic properties using targeted structural distortion: New additions to a family of Mn6 single-molecule magnets

We report the synthesis and magnetic properties of three hexametallic Mn clusters: [Mn₆O₂(Et-sao)₆(O₂C-Naphth)₂(EtOH)₄(H₂O)₂] (1) (HO₂C-Naphth = 1-naphthoic acid, Et-saoH₂ = 2-hydroxyphenylpropanone oxime), [Mn₆O₂(Et-sao)₆(O₂C-Anthra)₂(EtOH)₄(H₂O)₂] · 0.66EtOH · 0.33H₂O (HO₂C-Anthra = anthracene-9-carboxylic acid) (2 · 0.66EtOH · 0.33H₂O) and [Mn₆O₂(Et-sao)₆(O₂CPhCCH)₂(EtOH)₄(H₂O)₂] · 1.7EtOH · 0.3H₂O (HO₂CPhC  CH = 4-ethynylbenzoic acid) (3 · 1.7EtOH · 0.3H₂O). Clusters 1–3 exhibit ferromagnetic exchange between all six Mn^III centres resulting in S = 12 ground spin states. Ac magnetic susceptibility and single crystal micro-SQUID measurements on 1–3 confirm SMM behaviour with barriers to magnetisation reversal of 60.12 (1), 60.10 (2) and 66.79 (3) K.     

Effects of intraspecific competition on growth and photosynthesis of Atriplex prostrata

We investigated the effect of intraspecific competition on growth parameters and photosynthesis of the salt marsh species Atriplex prostrata Boucher in order to distinguish the effects of density-dependent growth inhibition from salt stress. High plant density caused a reduction of 30% in height, 82% in stem dry mass, 80% in leaf dry mass, and 95% in root dry mass. High density also induced a pronounced 72% reduction in leaf area, 29% decrease in length of mature internodes and 50% decline in net photosynthetic rate. The alteration of net photosynthesis paralleled growth inhibition, decreasing from 7.6 ± 0.9 μmol CO₂ m⁻² s⁻¹ at low density to 3.5 ± 0.4 μmol CO₂ m⁻² s⁻¹ at high density, indicating growth inhibition caused by intraspecific competition is mainly due to a decline in net photosynthesis rate. Plants grown at high density also exhibited a reduction in stomatal conductance from 0.7 ± 0.1 mol H₂O m⁻² s⁻¹ at low density to 0.3 ± 0.1 mol H₂O m⁻² s⁻¹ at high density and a reduction in transpiration rate from 6.0 ± 0.3 mmol H₂O m⁻² s⁻¹ at low density to 4.3 ± 0.3 mmol H₂O m⁻² s⁻¹ at high density. Biomass production was inhibited by an increase in plant density, which reduced the rate of photosynthesis, stomatal conductance and leaf area of plants.