Transparent and luminescent ionogels composed of Eu3+‐coordinated ionic liquids and poly(methyl methacrylate)

We report here on transparent and luminescent ionogels that consist of ionic ternary europium (III) complexes and the inexpensive non‐toxic compound, poly(methyl methacrylate) (PMMA) and that were formed by dissolving these complexes in methacrylate (MMA) monomers followed by in situ polymerization. The resulting ionogels show a bright red emission under near‐UV light irradiation. Luminescence data confirm the energy transfer from terpyridine‐functionalized ionic liquid to Eu³⁺ ions. Copyright © 2015 John Wiley & Sons, Ltd.     

Superparamagnetic poly(methyl methacrylate) beads for nattokinase purification from fermentation broth

An effective method for purification of nattokinase from fermentation broth using magnetic poly(methyl methacrylate) (PMMA) beads immobilized with p-aminobenzamidine was proposed in this study. Firstly, magnetic PMMA beads with a narrow size distribution were prepared by spraying suspension polymerization. Then, they were highly functionalized via transesterification reaction with polyethylene glycol. The surface hydroxyl-modified magnetic beads obtained were further modified with chloroethylamine to transfer the surface amino-modified magnetic functional beads. The morphology and surface functionality of the magnetic beads were examined by scanning electron microscopy and Fourier transform infrared. An affinity ligand, p-aminobenzamidine was covalently immobilized to the amino-modified magnetic beads by the glutaraldehyde method for nattokinase purification directly from the fermentation broth. The purification factor and the recovery of the enzyme activity were found to be 8.7 and 85%, respectively. The purification of nattokinase from fermentation broth by magnetic beads only took 40 min, which shows a very fast purification of nattokinase compared to traditional purification methods.     

Functionalization of poly(methyl methacrylate) (PMMA) as a substrate for DNA microarrays

A chemical procedure was developed to functionalize poly(methyl methacrylate) (PMMA) substrates. PMMA is reacted with hexamethylene diamine to yield an aminated surface for immobilizing DNA in microarrays. The density of primary NH₂ groups was 0.29 nmol/cm². The availability of these primary amines was confirmed by the immobilization of DNA probes and hybridization with a complementary DNA strand. The hybridization signal and the hybridization efficiency of the chemically aminated PMMA slides were comparable to the hybridization signal and the hybridization efficiency obtained from differently chemically modified PMMA slides, silanized glass, commercial silylated glass and commercial plastic Euray™ slides. Immobilized and hybridized densities of 10 and 0.75 pmol/cm², respectively, were observed for microarrays on chemically aminated PMMA. The immobilized probes were heat stable since the hybridization performance of microarrays subjected to 20 PCR heat cycles was only reduced by 4%. In conclusion, this new strategy to modify PMMA provides a robust procedure to immobilize DNA, which is a very useful substrate for fabricating single use diagnostics devices with integrated functions, like sample preparation, treatment and detection using microfabrication and microelectronic techniques.     

The effect of alumina nanoparticles on the thermal properties of PMMA: a molecular dynamics simulation

Metal oxides, as one of the most promising flame retardant additives, improve the fire retardant and the thermal stability properties of polymers. In the present study, molecular dynamics (MD) simulations based on the united atom model were applied to study the effect of alumina nanoparticles on the density, thermal conductivity, heat capacity, and thermal diffusivity of isotactic poly(methyl methacrylate) (is-PMMA). Thermal diffusivity of PMMA and PMMA/alumina nanocomposite were investigated through calculating thermal conductivity, density and heat capacity in the range of 300–700?K. Heat capacity can be calculated using fluctuations properties of energy. Thermal conductivity was calculated through the nonequilibrium molecular dynamics (NEMD) simulation by Fourier’s law approach. Our results show that the addition of alumina nanoparticles decreases the heat capacity and increases the glass transition temperature (T_g), thermal conductivity and thermal diffusivity of the PMMA. Therefore, the addition of alumina nanoparticles to PMMA improves the fire retardancy of the polymer. In addition, we illustrate the links between the intermolecular and bulk properties of PMMA in the presence of the alumina nanoparticles.     

Design of recycling system for poly(methyl methacrylate) (PMMA). Part 1: recycling scenario analysis

Introduction

In this series of papers, we present a poly(methyl methacrylate) (PMMA) recycling system design based on environmental impacts, chemical hazards, and resource availability. We evaluated the recycling system by life cycle assessment, environment, health, and safety method, and material flow analysis.

Purpose

Previous recycling systems have not focused on highly functional plastics such as PMMA, partly because of lower available volumes of waste PMMA compared with other commodity plastics such as polyethylene or polypropylene. However, with the popularization of PMMA-containing products such as liquid crystal displays, the use of PMMA is increasing and this will result in an increase in waste PMMA in the future. The design and testing of recycling systems and technologies for treating waste PMMA is therefore a high research priority. In this study, we analyze recycling of PMMA monomers under a range of scenarios.

Methods

Based on the differences between PMMA grades and their life cycles, we developed a life cycle model and designed a range of scenarios for PMMA recycling. We obtained monomer recycling process inventory data based on the operational results of a pilot plant. Using this process inventory data, we quantified life cycle greenhouse gas (LC-GHG) emissions and fossil resource consumption, and we calculated the LIME single index.

Results and discussion

PMMA produces more than twice the amount of GHG emissions than other commodity resins. Through scenario and sensitivity analyses, we demonstrated that monomer recycling is more effective than mechanical recycling. Operational modifications in the monomer recycling process can potentially decrease LC-GHG emissions.

Conclusions

Highly functional plastics should be recycled while maintaining their key functions, such as the high transparency of PMMA. Monomer recycling has the potential to achieve a closed-loop recycling of PMMA.     

Poly(Dimethylsiloxane) (PDMS) Affects Gene Expression in PC12 Cells Differentiating into Neuronal-Like Cells

Introduction

Microfluidics systems usually consist of materials like PMMA - poly(methyl methacrylate) and PDMS - poly(dimethylsiloxane) and not polystyrene (PS), which is usually used for cell culture. Cellular and molecular responses in cells grown on PS are well characterized due to decades of accumulated research. In contrast, the experience base is limited for materials used in microfludics chip fabrication.

Methods

The effect of different materials (PS, PMMA and perforated PMMA with a piece of PDMS underneath) on the growth and differentiation of PC12 (adrenal phaeochromocytoma) cells into neuronal-like cells was investigated using cell viability, cell cycle distribution, morphology, and gene expression analysis.

Results/Conclusions

After differentiation, the morphology, viability and cell cycle distribution of PC12 cells grown on PS, PMMA with and without PDMS underneath was the same. By contrast, 41 genes showed different expression for PC12 cells differentiating on PMMA as compared to on PS. In contrast, 677 genes showed different expression on PMMA with PDMS underneath as compared with PC12 cells on PS. The differentially expressed genes are involved in neuronal cell development and function. However, there were also many markers for neuronal cell development and functions that were expressed similarly in cells differentiating on PS, PMMA and PMMA with PDMS underneath. In conclusion, it was shown that PMMA has a minor impact and PDMS a major impact on gene expression in PC12 cells.     

13C Nuclear magnetic resonance study of salt induced conformational change of basic polypeptides: Poly (L-lysine), poly (L-arginine), and poly (L-ornithine)

A ¹³C-nmr study of the salt-induced helix–coil transition of the basic polypeptides poly(L -lysine) [(Lys)_n], poly(L -arginine) [(Arg)_n], and poly (L -ornithine) [(Orn)_n] was performed to serve as a reference of the helical portion of histones and other proteins. As is the case with pH-induced helix–coil transition, the downfield displacement of the C^α and carbonyl carbon signals are observed in the helical state. The upfield shift of the C^β signals, on the other hand, is noted in the salt-induced transition. Regardless of the differences in the side chains and also the salts used, very similar helix-induced chemical shifts are obtained for (Lys)_n and (Arg)_n. However, the displacement of the C^α, C^β, and carbonyl carbons of (Orn)n in the presence of 4M NaClO₄ is found to be almost 50% of that of (Lys)_n and (Arg)_n. This is explained by the fact that the maximum helical content is about 50%, consistent with the ORD result. Further, the motion of the backbone and side chains of the helical from was estimated by measuring the spin-lattice relaxation time (T₁), nuclear Overhauser enhancement (NOE), and line width. In the case of (Lys)_n, the motion of the side chains is charged very little in comparison with that of the random coil. Indicating that the aggregation of the salt-induced helix is small in contrast to that of the pH-induced helix. For (Arg)_n, however, the precipitate of the helical polymers is mainly due to aggregation.     

Chemical structures of oligosaccharides in milks of the American black bear (Ursus americanus americanus) and cheetah (Acinonyx jubatus)

The milk oligosaccharides were studied for two species of the Carnivora: the American black bear (Ursus americanus, family Ursidae, Caniformia), and the cheetah, (Acinonyx jubatus, family Felidae, Feliformia). Lactose was the most dominant saccharide in cheetah milk, while this was a minor saccharide and milk oligosaccharides predominated over lactose in American black bear milk. The structures of 8 neutral saccharides from American black bear milk were found to be Gal(β1–4)Glc (lactose), Fuc(α1–2)Gal(β1–4)Glc (2′-fucosyllactose), Gal(α1–3)Gal(β1–4)Glc (isoglobotriose), Gal(α1–3)[Fuc(α1–2)]Gal(β1–4)Glc (B-tetrasaccharide), Gal(α1–3)[Fuc(α1–2)]Gal(β1–4)[Fuc(α1–3)]Glc (B-pentasaccharide), Fuc(α1–2)Gal(β1–4)[Fuc(α1–3)]GlcNAc(β1–3)Gal(β1–4)Glc (difucosyl lacto-N-neotetraose), Gal(α1–3)Gal(β1–4)[Fuc(α1–3)]GlcNAc(β1–3)Gal(β1–4)Glc (monogalactosyl monofucosyl lacto-N-neotetraose) and Gal(α1–3)Gal(β1–4)GlcNAc(β1–3)Gal(β1–4)Glc (Galili pentasaccharide). Structures of 5 acidic saccharides were also identified in black bear milk: Neu5Ac(α2–3)Gal(β1–4)Glc (3′-sialyllactose), Neu5Ac(α2–6)Gal(β1–4)GlcNAc(β1–3)[Fuc(α1–2)Gal(β1–4)GlcNAc(β1–6)]Gal(β1–4)Glc (monosialyl monofucosyl lacto-N-neohexaose), Neu5Ac(α2–6)Gal(β1–4)GlcNAc(β1–3)[Gal(α1–3)Gal(β1–4)GlcNAc(β1–6)]Gal(β1–4)Glc (monosialyl monogalactosyl lacto-N-neohexaose), Neu5Ac(α2–6)Gal(β1–4)GlcNAc(β1–3){Gal(α1–3)Gal(β1–4)[Fuc(α1–3)]GlcNAc(β1–6)}Gal(β1–4)Glc (monosialyl monogalactosyl monofucosyl lacto-N-neohexaose), and Neu5Ac(α2–6)Gal(β1–4)GlcNAc(β1–3){Gal(α1–3)[Fuc(α1–2)]Gal(β1–4)[Fuc(α1–3)]GlcNAc(β1–6)}Gal(β1–4)Glc (monosialyl monogalactosyl difucosyl lacto-N-neohexaose). A notable feature of some of these milk oligosaccharides is the presence of B-antigen (Gal(α1–3)[Fuc(α1–2)]Gal), α-Gal epitope (Gal(α1–3)Gal(β1–4)Glc(NAc)) and Lewis x (Gal(β1–4)[Fuc(α1–3)]GlcNAc) structures within oligosaccharides. By comparison to American black bear milk, cheetah milk had a much smaller array of oligosaccharides. Two cheetah milks contained Gal(α1–3)Gal(β1–4)Glc (isoglobotriose), while another cheetah milk did not, but contained Gal(β1–6)Gal(β1–4)Glc (6′-galactosyllactose) and Gal(β1–3)Gal(β1–4)Glc (3′-galactosyllactose). Two cheetah milks contained Gal(β1–4)GlcNAc(β1–3)[Gal(β1–4)GlcNAc(β1–6)]Gal(β1–4)Glc (lacto-N-neohexaose), and one cheetah milk contained Gal(β1–4)Glc-3’-O-sulfate. Neu5Ac(α2–8)Neu5Ac(α2–3)Gal(β1–4)Glc (disialyllactose) was the only sialyl oligosaccharide identified in cheetah milk. The heterogeneity of milk oligosaccharides was found between both species with respect of the presence/absence of B-antigen and Lewis x. The variety of milk oligosaccharides was much greater in the American black bear than in the cheetah. The ratio of milk oligosaccharides-to-lactose was lower in cheetah (1:1–1:2) than American black bear (21:1) which is likely a reflection of the requirement for a dietary supply of N-acetyl neuraminic acid (sialic acid), in altricial ursids compared to more precocial felids, given the role of these oligosaccharides in the synthesis of brain gangliosides and the polysialic chains on neural cell adhesion.

     

Amphiphilic hydrolyzable polydimethylsiloxane-b-poly(ethyleneglycol methacrylate-co-trialkylsilyl methacrylate) block copolymers for marine coatings. II. Antifouling laboratory tests and field trials

Abstract

Poly(dimethylsiloxane) (PDMS) elastomer coatings containing an amphiphilic hydrolyzable diblock copolymer additive were prepared and their potential as marine antifouling and antiadhesion materials was tested. The block copolymer additive consisted of a PDMS first block and a random poly(trialkylsilyl methacrylate (TRSiMA, R?=?butyl, isopropyl)-co-poly(ethyleneglycol) methacrylate (PEGMA) copolymer second block. PDMS-b-TRSiMA block copolymer additives without PEGMA units were also used as additives. The amphiphilic character of the coating surface was assessed in water using the captive air bubble technique for measurements of static and dynamic contact angles. The attachment of macro- and microorganisms on the coatings was evaluated by field tests and by performing adhesion tests to the barnacle Amphibalanus amphitrite and the green alga Ulva rigida. All the additive-based PDMS coatings showed better antiadhesion properties to A. amphitrite larvae than to U. rigida spores. Field tests provided meaningful information on the antifouling and fouling release activity of coatings over an immersion period of 23?months.     

Anisotropic rotational motions of poly(L-glutamic acid) in the alpha-helix conformation

The anisotropic rotational motion of the backbone and the side chains of poly(L -glutamic acid) in the α-helical structure was investigated using the ¹³C-T₁ and T₂ relaxation times of all carbon atoms with directly attached protons, obtained at a ¹³C-Larmor frequency of 67.89 MHz. The evaluation of the nmr data was carried out according to the previously derived anisotropic diffusion model, in which the macromolecule is considered a rigid rod. The rotation of the backbone is characterized by two diffusion constants, D₁ and D₃, describing the rotation perpendicular to and around the symmetry axis. The additional internal motion of the C^β-methylene group is described as a jump process with a jump rate, k₁, between two allowed rotametric states. Steric considerations indicate that the occupation of the third rotameric position is forbidden. The rotation of the C^γ-methylene group is decribed as a one-dimensional diffusion process around the C^β–C^γ bond. Investigation of the temperature dependence of the relaxation parameters led to the temperature dependence of the dynamic parameters. Activation energies were determined from these data. The dynamic parameters obtained for poly(L -glutamic acid) at 291 K are compared with the corresponding results of a previous study of poly(L -lysine). The development of an anisotropic diffusion model for the motions of the rod-shaped poly(L -lysine) α-helix and its application to the interpretation of the ¹³C-relaxation data of this molecule have already been published previously. In this model, both the overall molecular tumbling and the various internal motions have been characterized by diffusion constants or jump rates typical for each process. These dynamic parameters can be calculated from the spin–lattice relaxation times, the spin–spin relaxation times and the NOE factors of the C^α, C^β, and C^γ nuclei of the polypetide. In the present paper, we describe the application of the above-mentioned dynamic model to the interpretation of ¹³C-relaxation studies of a further homopolypeptide, poly(L -glutamic acid), in the α-helical structure. Furthermore, we studied the temperature dependence of the relaxation times of this polymer and determined the anisotropic diffusion parameters at each temperature. From their temperature dependence and from comparison of our present results with the data of our previous study of poly(L -lysine), we were able to derive new insights into the intramolecular diffusion processes and the excitation of various motions.     

Cellulose nanocrystals as a reinforcing material for electrospun poly(methyl methacrylate) fibers: Formation, properties and nanomechanical characterization

Uniform fibers composed of poly(methyl methacrylate) (PMMA) reinforced with progressively increasing contents of cellulose nanocrystals (CNCs), up to 41 wt% CNCs, have been successfully produced by electrospinning. The morphological, thermal and nanomechanical properties of the composite sub-micron fibers were investigated. The CNCs derived from wood pulp by sulfuric acid hydrolysis were well dispersed in solutions of PMMA and the processing solvent N,N-dimethylformamide prior to fiber formation. Well-formed fibers with controllable diameters were generated reproducibly at all CNC contents investigated including 41 wt%. The orientation of the CNCs along the fiber axis was facilitated by the electrospinning process and observed directly from microscopy examination. Shifts in thermal transitions of PMMA with increasing CNC content suggest hydrogen bonding interactions between CNC hydroxyl groups and carbonyl groups on the PMMA matrix. Nanoscale dynamic mechanical analysis (nano-DMA) was performed using nanoindentation on single fibers perpendicular to the fiber axis. Many of the current challenges associated with single fiber nanoindentation are addressed, such as fiber diameter range and minimum, depth to diameter ratio, and valid depth range under these experimental conditions. Fibers that contained 17 wt% CNCs showed a modest increase of 17% in the storage modulus of PMMA, a high modulus polymer of interest for transparent composite applications.     

Rheological Studies of PMMA–PVC Based Polymer Blend Electrolytes with LiTFSI as Doping Salt

In this research, two systems are studied. In the first system, the ratio of poly (methyl methacrylate) (PMMA) and poly (vinyl chloride) (PVC) is varied, whereas in the second system, the composition of PMMA–PVC polymer blends is varied with dopant salt, lithium bis (trifluoromethanesulfonyl) imide (LiTFSI) with a fixed ratio of 70 wt% of PMMA to 30 wt% of PVC. Oscillation tests such as amplitude sweep and frequency sweep are discussed in order to study the viscoelastic properties of samples. Elastic properties are much higher than viscous properties within the range in the amplitude sweep and oscillatory shear sweep studies. The crossover of and is absent. Linear viscoelastic (LVE) range was further determined in order to perform the frequency sweep. However, the absence of viscous behavior in the frequency sweep indicates the solid-like characteristic within the frequency regime. The viscosity of all samples is found to decrease as shear rate increases.     

Luminescence of Eu3+ ions in hybrid polymer‐inorganic composites based on poly(methyl methacrylate) and zirconia nanoparticles

Spherical nanoparticles of ZrO₂ with 2 and 10 mol% EuO_1.5 up to 20 nm size were prepared by the method of hydrothermal synthesis for luminescent functionalization of the polymer–inorganic nanocomposites based on poly(methyl methacrylate). Surface modification of oxide nanoparticles was carried out by 3‐(trimethoxysilyl)propyl methacrylate, dimethoxymethylvinyl silane and 2‐hydroxyethyl methacrylate to provide uniform distribution and to prevent agglomeration of nanosized filler in the polymer matrix. Polymer–inorganic composites were synthesized by in situ free radical polymerization in bulk. Structuring of ZrO₂‐EuO_1.5 nanoparticles in the poly(methyl methacrylate) was studied by very‐small‐angle neutron scattering. According to the results, the dependence of photoluminescent properties of ZrO₂‐EuO_1.5 nanoparticles on the content of lanthanide, the symmetry of the crystal field, surface treatment and the polymer matrix were established. A correlation was shown between Stark splitting in luminescence spectra of ZrO₂‐EuO_1.5 nanoparticles and their phase composition. Using MMT‐assay it was shown that composites based on poly(methyl methacrylate) and ZrO₂‐EuO_1.5 nanoparticles do not have cytotoxic properties, which makes it possible to use them as prosthesis materials with contrasted and luminescent imaging properties.     

An Effective Enzyme Interacting with Poly (dT-dA)· Poly (dT-dA): A Dynamic Enhancer-Repressor Action

Abstract

The Green function technique is used to study the open hydrogen bond probability of poly(dT-dA)·poly(dT-dA) when an effective enzyme is attached to the helix. The DNA interstrand hydrogen bond mean motion and probability of fluctuating to an open state depends on the internal vibrational frequency of the enzyme. An enzyme with internal frequency of 80 cm ^?1 reduces hydrogen bond motion and the resulting probability of hydrogen bond fluctuational opening. An enzyme with internal frequency of 72 cm ^?1 increases hydrogen bond motion and the probability of hydrogen bond breaking.     

Poly(L-alanine): investigation of alpha-helix and beta-sheet forms by low-temperature specific heat measurements (1.5-20 degrees K)

For an ideal one-dimensional solid, the low-temperature specific heat, C, is proportional to temperature T¹, for an ideal two-dimensional solid C is proportional to T². We have observed such one- and two-dimensional behavior in alpha- and beta-poly(L -alanine) in the temperature range 1.5–20°K (also intermixed with a three-dimensional behavior). A specific heat anomaly has also been observed. These measurements are important in evaluating the effective elastic constants, including hydrogen bonding, of the biopolymers. They also provide essential information for vibrational theories of poly(L -alanine), which up until now have been based on high-energy data.     

CD studies of synthetic polypeptides as histone models: Poly(L-Arg-L-Ile-Gly), poly(L-Arg-L-Nva-Gly), and poly(L-Arg-L-Nle-Gly)

Sequential polypeptides (L -Arg-X-Gly)_n were prepared as synthetic models of arginine-rich histones to study their structure and their stereospecific interactions with DNA. In our previous work the conformational characteristics of poly(L -Arg-L -Ala-Gly), poly(L -Arg-L -Val-Gly), and poly(L -Arg-L -Leu-Gly) have already been analyzed. To obtain further insight into the influence of the X residue side chain on the conformation of the (L -Arg-X-Gly)_n polytripeptides, we now report their synthesis and cd properties when X represents the amino acid residues Ile, Nva, and Nle. The pentachlorophenyl active esters of the appropriate tripeptides were used to perform the polymerization, and the toluene-4-sulfonyl group was used to protect the arginine guanido group. CD spectroscopy showed that, in 100% trifluoroethanol, the degree of helical conformation increased in the order Ile → Nle → Nva. An equilibrium between β-turn, α-helix, and random-coil conformers occurred in 100% hexafluoroisopropyl alcohol, while a rise in the temperature or the addition of water favored the α-helix, the highest percentage of which was observed in a mixture of hexafluoroisopropyl alcohol: water (20 : 80) and in the order Ile → Nle → Nva. In aqueous solutions (at pH 7 and 12) the polymers behaved as a random coil, but they were forced to a less aperiodic structure, over a range of ionic strengths (0–0.5M NaF). A rise in temperature of up to 70°C in 100% trifluoroethanol resulted in a decrease of the α-helix percentage of the polymers, while in aqueous solutions the aperiodic structure decreased with increasing temperature. This study proved the importance of the nature of the X residue (length, C_β branching) in relation to the structural order of the sequential polypeptides. We concluded that the polymers prepared are suitable models for arginine-rich histones.     

Experimental characterization of poly(hydroxyalkyl-L-glutamine) conformations in aqueous calcium chloride and sodium perchlorate solutions

Poly(hydroxyalkyl-L -glutamine) (alkyl = ethyl, propyl, butyl) solutions have been studied by CD as functions of temperature and activity of calcium chloride and sodium perchlorate. Helical content is altered by changes in salt activity and temperature. The helicity of poly(hydroxybutyl-L -glutamine) and poly(hydroxypropyl-L -glutamine) falls to zero in a monotonic fashion with increasing calcium chloride activity. A nonzero helicity reappears at activities in excess of 5–50 mol kg^?1. Poly(hydroxypropyl-L -glutamine) is much more sensitive to calcium chloride than is poly(hydroxybutyl-L -glutamine), and both polypeptides are more sensitive to calcium chloride than are typical proteins. Markedly different behavior is observed with sodium perchlorate. This salt acts as a helix stabilizer at low activities but becomes a destabilizer at activities higher than 0.3–1.0 mol kg^?1. In this respect the effect of sodium perchlorate on nonionic poly(hydroxyalkyl-L -glutamines) resembles that seen with cationic poly(L -lysine) and poly(L -arginine). Helix stabilization at low sodium perchlorate activity is moderate for poly(hydroxybutyl-L -glutamine) and large for poly(hydroxypropyl-L -glutamine) and poly(hydroxyethyl-L -glutamine).     

Chitosan-functionalized poly(methyl methacrylate) particles by spinning disk processing for lipase immobilization

Chitosan-functionalized poly(methyl methacrylate) (PMMA-CH) particles were prepared by complexation between the negatively charged PMMA particles and the positively charged chitosan via a spinning disk processing. Processing parameters; feed rate and spinning speed, were optimized, which were traced by size distribution profiles of the formed PMMA-CH particles. Their sizes and net surface charges were found to be affected by MWs of chitosan (45, 100, and 230 kDa) used. Microscopic evidences were used to confirm their core–shell morphology. Chemical characteristics and thermal stability of such particles were determined by FTIR and TGA, respectively. Then, their ability to immobilize lipase (EC 3.1.1.3) was conducted and followed through zeta potential measurement. The percentage of lipase adsorption capacity increased with increasing lipase content, but the value decreased when the size of PMMA-CH particles increased. Also, the activity of lipase attached on PMMA-CH particles’ surface was preserved and increased with lipase loading.     

Design of recycling system for poly(methyl methacrylate) (PMMA). Part 2: process hazards and material flow analysis

Introduction

In this series of papers, we present a design of poly(methyl methacrylate) (PMMA) recycling system considering environmental impacts, chemical hazards, and resource availability. We applied life cycle assessment (LCA), environment, health, and safety (EHS) assessment as well as material flow analysis to the evaluation of the recycling system.

Purpose

Recycling systems for highly functional plastics such as PMMA have not been studied sufficiently. Along with the popularization of PMMA-containing products such as liquid crystal displays (LCDs), the use of PMMA is steadily increasing, which will result in more waste of PMMA in the next decades. In this study, pyrolysis process for recycling waste PMMA into methyl methacrylate (MMA) monomer was examined, considering not only general environmental impacts quantified by life cycle assessment but also local environment, health, and safety hazards, and raw material availability.

Methods

Process EHS hazards assessment was applied to quantify the local effects of the PMMA monomer recycling process. Process hazards are strongly connected with the hazardous properties of chemical substances and stream conditions within the process. Two alternative cooling methods exist, and their difference was analyzed by LCA and EHS assessment. Besides the process hazard, the availability of waste PMMA must be an important point for the feasibility of implementing the PMMA monomer recycling process. The available amount can be quantified by analyzing the material flow of PMMA-containing products. PMMA contained in LCDs as light guide panels was selected as a feasible source of waste PMMA, and the quantity of PMMA flows in the society was evaluated.

Results and discussion

In the case of PMMA, monomer recycling has less process hazard than the production of fresh MMA from crude oil. The implementation of circulated cooling water could significantly decrease the process hazard in PMMA pyrolysis attributable to chemical hazards. Material flow analysis revealed that the availability of waste PMMA shows a fluctuating trend in the next 20 years because of the sharp peak demand for LCD television sets. The fluctuation is strongly dependent on the lifetime of LCD television sets.

Conclusions

PMMA monomer recycling has a potential to reduce environmental impacts with a less process hazards than fresh MMA production from crude oil. The availability of waste PMMA has a strong relationship with the lifetime of LCD television sets. The multiple and comprehensive assessments can reveal various aspects of a process technology.     

Sequence and conformational effects on imino proton exchange in A.T- and A.U-containing DNA and RNA duplexes

¹H-nmr relaxation has been used to study the effect of sequence and conformation on imino proton exchange in adenine–thymine (A · T) and adenine–uracil (A · U) containing DNA and RNA duplexes. At low temperature, relaxation is caused by dipolar interactions between the imino and the adenine amino and AH2 protons, and at higher temperature, by exchange with the solvent protons. Although room temperature exchange rates vary between 3 and 12s^?1, the exchange activation energies (E_α) are insensitive to changes in the duplex sequence (alternating vs homopolymer duplexes), the conformation (B-form DNA vs A-form RNA), and the identity of the pyrimidine base (thymine vs uracil). The average value of the activation energy for the five duplexes studied, poly[d(A-T)], poly[d(A) · d(T)], poly[d(A-U)], Poly[d(A) · d(U)], and poly[r(A) · r(U)], was 16.8 ± 1.3 kcal/mol. In addition, we find that the average E_α for the A.T base pairs in a 43-base-pair restriction fragment is 16.4 ± 1.0 kcal/mol. This result is to be contrasted with the observation that the E_α of cytosine-containing duplexes depends on the sequence, conformation, and substituent groups on the purine and pyrimidine bases. Taken together, the data indicate that there is a common low-energy pathway for the escape of the thymine (uracil) imino protons from the double helix. The absolute values of the exchange rates in the simple sequence polymers are typically 3–10 times faster than in DNAs containing both A · T and G · C base pairs.