Effect of N-terminal residues on the structural stability of recombinant horse L-chain apoferritin in an acidic environment

The denaturation of recombinant horse L-chain apoferritin (rLF), which is composed of 24 L-chain subunits, in acidic solution was studied. Using two rLF mutants, lacking four (Fer4) or eight (Fer8) N-terminal amino acid residues, the effect of N-terminal residues on the protein's stability was investigated. Of the two mutants and wild-type rLF, the tertiary and secondary structures of Fer8 were found to be most sensitive to an acidic environment. The Fer8 protein dissociated easily into subunit dimers at or below pH 2.0. Comparing the crystal structures of the mutant proteins, deletion of the N-terminal residues was found to result in fewer inter- and intra-subunit hydrogen bonds. The loss of these bonds is assumed to be responsible for lower endurance against acidic denaturation in N-terminus-deleted mutants. These results indicated that the inter- and intra-subunit hydrogen bonds of N-terminal residues affect the denaturation, especially oligomer formation of apoferritin subunits and will be of use in designing ferritin-based nanodevices.     

Conformation-Determining role for the N-acetyl group in the O-glycosidic linkage, α-GalNAc-Thr

An ¹H-nmr study of 2-acetamido-2-deoxy-3,4,6-tri-O-acetyl-D-galactopyranose (AcGalNAc) glycosylated Thr-containing tripeptides in Me₂SO-d₆ solution reveals two mutually exclusive intramolecular hydrogen bonds. In Z-Thr(AcGalNAc)-Ala-Ala-OMe, there is an intramolecular hydrogen bond between the Thr amide proton and the sugar N-acetyl carbonyl oxygen. The strength of this hydrogen bond will be dependent on the amino acid residues on the Thr C terminal side to some undetermined distance. In Ac-Thr(AcGalNAc)-Ala-Ala-OMe, a different intramolecular hydrogen bond between the sugar N-acetyl amide proton and the Thr carbonyl oxygen exists. The choice of hydrogen bonds seems dependent on the bulkiness of the residues on the Thr N terminal side. The consequence of such strong hydrogen bonds is a clearly defined orientation of the sugar moiety with respect to the peptide backbone. In the former, the plane of the sugar pyranose ring is roughly oriented perpendicularly to the peptide backbone. The latter orientation is where the plane of the sugar ring is roughly in line with the peptide backbone. In both orientations, the sugar moiety can increase the shielding of the neighboring amino acid residues from the solvent. The idea that the amino acid residues near the glycosylated Thr influence orientation of the sugar moiety with respect to the peptide backbone and in turn possibly hinder peptide backbone flexibility has interesting implications in the conformational as well as the biological role of O-glycoproteins.     

Crystal structures of HLA-A*0201 complexed with antigenic peptides with either the amino- or carboxyl-terminal group substituted by a methyl group

The crystal structures of class I major histocompatibility complex (MHC) molecules complexed with antigenic peptides revealed a network of hydrogen bonds between the charged amino- and carboxyl-termini of the peptides and conserved MHC residues at both ends of the peptide binding site. These interactions were shown to contribute substantially to the stability of class I MHC/peptide complexes by thermal denaturation studies using synthetic peptides in which either the amino- or carboxyl-terminal group is substituted by a methyl group. Here we report crystal structures of HLA-A*0201 complexed with these terminally modified synthetic peptides showing that they adopt the same bound conformation as antigenic peptides. A number of variations in peptide conformation were observed for the terminally modified peptides, including in one case, a large conformational difference in four central peptide residues that is apparently caused by the lattice contact. This is reminiscent of the way binding a T-cell receptor changed the conformation of central residues of an MHC-bound peptide. The structures determined identify which conserved hydrogen bonds are eliminated in terminally substituted peptides and suggest an increased energetic importance of the interactions at the peptide termini for MHC-peptide stability. Proteins 33:97–106, 1998. © 1998 Wiley-Liss, Inc.     

Tight binding inhibitors of scytalone dehydratase: effects of site-directed mutations

We explore the use of site-directed mutations of scytalone dehydratase to study inhibitor binding interactions. The enzyme is the physiological target of new fungicides and the subject of inhibitor design and optimization. X-ray structures show that potent inhibitors (K(i)'s approximately 10(-)(11) M) interact mostly with 11 amino acid side chains and, in some cases, with a single backbone amide. Fifteen site-directed mutants of the 11 enzyme residues were prepared to disrupt enzyme-inhibitor interactions, and inhibition constants for 13 inhibitors were determined to assess changes in binding potencies. The results indicate that two of the six hydrogen bonds (always present in X-ray structures of native enzyme-inhibitor complexes) are not important for inhibitor binding. The other four hydrogen bonds are important for inhibitor binding, and the strength of the individual bonds is inhibitor-dependent. Inhibitor atoms remote from the hydrogen bonds influence their strength, presumably by effecting small changes in inhibitor orientation. Several hydrophobic amino acid residues are important recognition elements for lipophilic inhibitor functionalities, which is fully consistent with X-ray structures determined from crystals of enzyme-inhibitor complexes grown at neutral pH but not with those determined from crystals grown under acidic conditions. This study of mutant enzymes complements insights from X-ray structures and structure-activity relationships of the wild-type enzyme for refining views of inhibitor recognition.     

Molecular dynamics simulations of helix denaturation.

An understanding of the structural transitions that an alpha-helix undergoes will help to elucidate such motions in proteins and their role in protein folding. We present the results of molecular dynamics simulations to investigate these transitions in a short polyalanine peptide (13 residues) both in vacuo and in the presence of solvent. The denaturation of this peptide was monitored as a function of temperature (ranging from 5 to 200 degrees C). In vacuo, the helical state predominated at all temperatures, whereas in solution the helix melted with increasing temperature. The peptide was predominantly helical at low temperature in solution, while at intermediate temperatures the peptide spent the bulk of the time fluctuating between different conformations with intermediate amounts of helix, e.g. not completely helical nor entirely non-helical. Many of these conformations consisted of short helical segments with intervening non-helical residues. At high temperature the peptide unfolded and adopted various collapsed unstructured states. The intrahelical hydrogen bonds that break at high temperature were not fully compensated by hydrogen bonds with water molecules in the partially unfolded forms of the peptide. Increases in temperature disrupted both the helical structure and the peptide-water interactions. Water played a major but indirect role in facilitating unfolding, as opposed to specifically competing for the intrapeptide hydrogen bonds. The implications of our results to protein folding are discussed.     

Theory of protein molecule self-organization. I. Thermodynamic parameters of local secondary structures in the unfolded protein chain

This paper presents the results of a stereochemical analysis of local interactions in unfolded protein chains (sterical repulsions, hydrogen, and hydrophobic bonds, etc.) by means of space-filling modeles. On the basis of this analysis, an evaluation is made of thermodynamic parameters controlling the building-in of all the 20 natural amino acid residues in all the physically possible position of local secondary structures (α-helices, including α-helices with short fragments of helices 3₁₀ at the C-terminus; β-bends of different types, helices 3₁₀, and their combinations) as well as thermodynamic parameters of separate hydrogen bonds of polar side groups with the neighbor peptide groups (“local contacts”). The accuracy of the obtained results is discussed.     

Classification of pseudo pairs between nucleotide bases and amino acids by analysis of nucleotide-protein complexes

Nucleotide bases are recognized by amino acid residues in a variety of DNA/RNA binding and nucleotide binding proteins. In this study, a total of 446 crystal structures of nucleotide-protein complexes are analyzed manually and pseudo pairs together with single and bifurcated hydrogen bonds observed between bases and amino acids are classified and annotated. Only 5 of the 20 usual amino acid residues, Asn, Gln, Asp, Glu and Arg, are able to orient in a coplanar fashion in order to form pseudo pairs with nucleotide bases through two hydrogen bonds. The peptide backbone can also form pseudo pairs with nucleotide bases and presents a strong bias for binding to the adenine base. The Watson-Crick side of the nucleotide bases is the major interaction edge participating in such pseudo pairs. Pseudo pairs between the Watson-Crick edge of guanine and Asp are frequently observed. The Hoogsteen edge of the purine bases is a good discriminatory element in recognition of nucleotide bases by protein side chains through the pseudo pairing: the Hoogsteen edge of adenine is recognized by various amino acids while the Hoogsteen edge of guanine is only recognized by Arg. The sugar edge is rarely recognized by either the side-chain or peptide backbone of amino acid residues.     

Variants of 3(10)-helices in proteins

An analysis of the shortest 3(10)-helices, containing three helical residues and two flanking capping residues that participate in two consecutive i + 3 --> i hydrogen bonds, shows that not all helices belong to the classic 3(10)-helix, where the three central residues adopt the right-handed helical conformation (alpha(R)). Three variants identified are: 3L10-helix with all residues in the left-handed helical region (alpha(L)), 3EL10-helix where the first residue is in the extended region followed by two residues in the alpha(L) conformation, and its mirror-image, the 3E'R10-helix. In the context of these helices, as well as the equivalent variants of alpha-helices, the length dependence of the handedness of secondary structures in protein structure is discussed. There are considerable differences in the amino acid preferences at different positions in the various types of 3(10)-helices. Each type of 3(10)-helix can be thought to be made up of an extension of a particular type of beta-turn (made up of residues i to i + 3) such that the (i + 3)th residue assumes the same conformation as the preceding residue. Distinct residue preferences at i and i + 3 positions seem to decide whether a particular stretch of four residues will be a beta-turn or a 3(10)-helix in the folded structure.     

Identification of dansyl dipeptides in the dansyl-Edman peptide degradation

The manual dansyl-Edman¹ degradation procedure is one of the most convenient and widely used techniques for the sequencing of peptides up to about 15 residues in length (1,2). A frequently encountered complication in this procedure is the resistance of certain peptide bonds to acid hydrolysis. If the amino terminal peptide bond of the dansylated peptide is especially resistant, the dansyl dipeptide is frequently in higher yield than the corresponding dansyl amino acid. The resistant dansyl dipeptide is often composed of two hydrophobic amino acid residues. The resistance of such peptide bonds to acid hydrolysis is well understood (3). Other resistant bonds have, however, been noted in practice, e.g., those involving a hydrophobic and a prolyl residue. This phenomenon can lead to difficulty in interpretation of the thin-layer chromatogram and to subsequent incorrect identification of amino acid residues. Extending the hydrolysis time to 24 hr still leaves especially resistant dipeptides as the major product while significantly reducing the yield of other dansylated residues, notably dansyl proline, serine, and threonine. We report here the chromatographic behavior of 18 dansyl dipeptides on polyamide thin-layers using the solvent systems commonly employed in the dansyl-Edman procedure (2). All of these dipeptides have been encountered in practice, and the extent of hydrolysis in 6 n HCl at 110°C is usually less than 20%.     

Tertiary structural constraints on protein evolutionary diversity: templates, key residues and structure prediction

The pattern of residue substitution in divergently evolving families of globular proteins is highly variable. At each position in a fold there are constraints on the identities of amino acids from both the three-dimensional structure and the function of the protein. To characterize and quantify the structural constraints, we have made a comparative analysis of families of homologous globular proteins. Residues are classified according to amino acid type, secondary structure, accessibility of the sidechain, and existence of hydrogen bonds from sidechain to other sidechains or peptide carbonyl or amide functions. There are distinct patterns of substitution especially where residues are both solvent inaccessible and hydrogen bonded through their sidechains. The patterns of residue substitution can be used to construct templates or to identify 'key' residues if one or more structures are known. Conversely, analysis of conversation and substitution across a large family of aligned sequences in terms of substitution profiles can allow prediction of tertiary environment or indicate a functional role. Similar analyses can be used to test the validity of putative structures if several homologous sequences are available.     

Molecular Determinants of PAM2 Recognition by the MLLE Domain of Poly(A)-Binding Protein

MLLE (previously known as PABC) is a peptide-binding domain that is found in poly(A)-binding protein (PABP) and EDD (E3 isolated by differential display), a HECT E3 ubiquitin ligase also known as HYD (hyperplastic discs tumor suppressor) or UBR5. The MLLE domain from PABP recruits various regulatory proteins and translation factors to poly(A) mRNAs through binding of a conserved 12 amino acid peptide motif called PAM2 (for PABP-interacting motif 2). Here, we determined crystal structures of the MLLE domain from PABP alone and in complex with PAM2 peptides from PABP-interacting protein 2. The structures provide a detailed view of hydrophobic determinants of the MLLE binding coded by PAM2 positions 3, 5, 7, 10, and 12 and reveal novel intermolecular polar contacts. In particular, the side chain of the invariant MLLE residue K580 forms hydrogen bonds with the backbone of PAM2 residues 5 and 7. The structures also show that peptide residues outside of the conserved PAM2 motif contribute to binding. Altogether, the structures provide a significant advance in understanding the molecular basis for the binding of PABP by PAM2-containing proteins involved in translational control, mRNA deadenylation, and other cellular processes.     

Isothermal unfolding studies on the apo and holo forms of Plasmodium falciparum acyl carrier protein. Role of the 4'-phosphopantetheine group in the stability of the holo form of Plasmodium falciparum acyl carrier protein

The unfolding pathways of the two forms of Plasmodium falciparum acyl carrier protein, the apo and holo forms, were determined by guanidine hydrochloride-induced denaturation. Both the apo form and the holo form displayed a reversible two-state unfolding mechanism. The analysis of isothermal denaturation data provides values for the conformational stability of the two proteins. Although both forms have the same amino acid sequence, and they have similar secondary structures, it was found that the - DeltaG of unfolding of the holo form was lower than that of the apo form at all the temperatures at which the experiments were done. The higher stability of the holo form can be attributed to the number of favorable contacts that the 4'-phosphopantetheine group makes with the surface residues by virtue of a number of hydrogen bonds. Furthermore, there are several hydrophobic interactions with 4'-phosphopantetheine that firmly maintain the structure of the holo form. We show here for the first time that the interactions between 4'-phosphopantetheine and the polypeptide backbone of acyl carrier protein stabilize the protein. As Plasmodium acyl carrier protein has a similar secondary structure to the other acyl carrier proteins and acyl carrier protein-like domains, the detailed biophysical characterization of Plasmodium acyl carrier protein can serve as a prototype for the analysis of the conformational stability of other acyl carrier proteins.     

Geometry of interaction of the histidine ring with other planar and basic residues

Among the aromatic residues in protein structures, histidine (His) is unique, as it can exist in the neutral or positively charged form at the physiological pH. As such, it can interact with other aromatic residues as well as form hydrogen bonds with polar and charged (both negative and positive) residues. We have analyzed the geometry of interaction of His residues with nine other planar side chains containing aromatic (residues Phe, Tyr, Trp, and His), carboxylate (Asp and Glu), carboxamide (Asn and Gln) and guanidinium (Arg) groups in 432 polypeptide chains. With the exception of the aspartic (Asp) and glutamic (Glu) acid side-chains, all other residues prefer to interact in a face-to-face or offset-face-stacked orientation with the His ring. Such a geometry is different from the edge-to-face relative orientation normally associated with the aromatic-aromatic interaction. His-His pair prefers to interact in a face-to-face orientation; however, when both the residues bind the same metal ion, the interplanar angle is close to 90 degrees. The occurrence of different interactions (including the nonconventional N-H...pi and C-H...pi hydrogen bonds) have been correlated with the relative orientations between the interacting residues. Several structural motifs, mostly involved in binding metal ions, have been identified by considering the cases where His residues are in contact with four other planar moieties. About 10% of His residues used here are also found in sequence patterns in PROSITE database. There are examples of the amino end of the Lys side chain interacting with His residues in such a way that it is located on an arc around a ring nitrogen atom.     

Prudent modeling of core polar residues in computational protein design

Hydrogen bond interactions were surveyed in a set of protein structures. Compared to surface positions, polar side-chains at core positions form a greater number of intra-molecular hydrogen bonds. Furthermore, the majority of polar side-chains at core positions form at least one hydrogen bond to main-chain atoms that are not involved in hydrogen bonds to other main-chain atoms. Based on this structural survey, hydrogen bond rules were generated for each polar amino acid for use in protein core design. In the context of protein core design, these prudent polar rules were used to eliminate from consideration polar amino acid rotamers that do not form a minimum number of hydrogen bonds. As an initial test, the core of Escherichia coli thioredoxin was selected as a design target. For this target, the prudent polar strategy resulted in a minor increase in computational complexity compared to a strategy that did not allow polar residues. Dead-end elimination was used to identify global minimum energy conformations for the prudent polar and no polar strategies. The prudent polar strategy identified a protein sequence that was thermodynamically stabilized by 2.5 kcal/mol relative to wild-type thioredoxin and 2.2 kcal/mol relative to a thioredoxin variant whose core was designed without polar residues.     

The identification of conserved interactions within the SH3 domain by alignment of sequences and structures

The SH3 domain, comprised of approximately 60 residues, is found within a wide variety of proteins, and is a mediator of protein-protein interactions. Due to the large number of SH3 domain sequences and structures in the databases, this domain provides one of the best available systems for the examination of sequence and structural conservation within a protein family. In this study, a large and diverse alignment of SH3 domain sequences was constructed, and the pattern of conservation within this alignment was compared to conserved structural features, as deduced from analysis of eighteen different SH3 domain structures. Seventeen SH3 domain structures solved in the presence of bound peptide were also examined to identify positions that are consistently most important in mediating the peptide-binding function of this domain. Although residues at the two most conserved positions in the alignment are directly involved in peptide binding, residues at most other conserved positions play structural roles, such as stabilizing turns or comprising the hydrophobic core. Surprisingly, several highly conserved side-chain to main-chain hydrogen bonds were observed in the functionally crucial RT-Src loop between residues with little direct involvement in peptide binding. These hydrogen bonds may be important for maintaining this region in the precise conformation necessary for specific peptide recognition. In addition, a previously unrecognized yet highly conserved beta-bulge was identified in the second beta-strand of the domain, which appears to provide a necessary kink in this strand, allowing it to hydrogen bond to both sheets comprising the fold.     

Non-covalent interaction of 2', 4', 5', 7'-tetrabromo-4, 5, 6, 7-tetrachlorofluorescein with proteins and its application

The interactions of 2', 4', 5', 7'-tetrabromo-4, 5, 6, 7-tetrachlorofluorescein (TBTCF) with BSA, ovalbumin (OVA) and poly-L-lysine (PLYS) at pH 3.70 have been investigated by combination of the spectral correction technique and the Langmuir isothermal adsorption. The active connection actions such as ion pairs, van der Waals' force, hydrogen bond, hydrophobic bond were proposed to explain the non-covalent interaction between TBTCF and BSA, OVA and PLYS. Effects of the electrolyte and high temperature indicated that union of the active connections between TBTCF and BSA and OVA was too firm to be destroyed. The relationship between the binding number of TBTCF and variety fraction of the amino acid residues was analyzed. The binding number of TBTCF depended on the number of positively charged amino acid residues. The other amino acid residues surrounded and seized TBTCF by hydrogen bonds and hydrophobic bonds when the electrostatic attraction pulled TBTCF to link protein. In addition, a novel method named the absorbance ratio difference was established for determination of protein in trace level and was applied with much higher sensitivity than the ordinary method.     

Nanotubules formed by highly hydrophobic amphiphilic alpha-helical peptides and natural phospholipids

We previously reported that the 18-mer amphiphilic alpha-helical peptide, Hel 13-5, consisting of 13 hydrophobic residues and five hydrophilic amino acid residues, can induce neutral liposomes (egg yolk phosphatidylcholine) to adopt long nanotubular structures and that the interaction of specific peptides with specific phospholipid mixtures induces the formation of membrane structures resembling cellular organelles such as the Golgi apparatus. In the present study we focused our attention on the effects of peptide sequence and chain length on the nanotubule formation occurring in mixture systems of Hel 13-5 and various neutral and acidic lipid species by means of turbidity measurements, dynamic light scattering measurements, and electron microscopy. We designed and synthesized two sets of Hel 13-5 related peptides: 1) Five peptides to examine the role of hydrophobic or hydrophilic residues in amphiphilic alpha-helical structures, and 2) Six peptides to examine the role of peptide length, having even number residues from 12 to 24. Conformational, solution, and morphological studies showed that the amphiphilic alpha-helical structure and the peptide chain length (especially 18 amino acid residues) are critical determinants of very long tubular structures. A mixture of alpha-helix and beta-structures determines the tubular shapes and assemblies. However, we found that the charged Lys residues comprising the hydrophilic regions of amphiphilic structures can be replaced by Arg or Glu residues without a loss of tubular structures. This suggests that the mechanism of microtubule formation does not involve the charge interaction. The immersion of the hydrophobic part of the amphiphilic peptides into liposomes initially forms elliptic-like structures due to the fusion of small liposomes, which is followed by a transformation into tubular structures of various sizes and shapes.     

Molecular stability of chemically modified collagen triple helices

Ionic residues influence the stability of collagen triple helices and play a relevant role in the spontaneous aggregation of fibrillar collagens. Collagen types I and II and some of their CNBr peptides were chemically modified in mild conditions with two different protocols. Primary amino groups of Lys and Hyl were N-methylated by formaldehyde in reducing conditions or N-acetylated by sulfosuccinimidyl acetate. The positive charge of amino groups at physiological pH was maintained after the former modification, whereas it was lost after the latter. These chemical derivatizations did not significantly alter the stability of the triple helical conformation of peptide trimeric species. Also the enthalpic change on denaturation was largely unaffected by derivatizations. This implies that no significant variation of weak bonds, either in number or overall strength, and of entropy occur on modification. These properties can probably be explained by the fact that chemically modified groups maintain the ability to form hydrogen bonds.     

The crucial role of conserved intermolecular H-bonds inaccessible to the solvent in formation and stabilization of the TL5.5 SrRNA complex

Analysis of the structures of two complexes of 5 S rRNA with homologous ribosomal proteins, Escherichia coli L25 and Thermus thermophilus TL5, revealed that amino acid residues interacting with RNA can be divided into two different groups. The first group consists of non-conserved residues, which form intermolecular hydrogen bonds accessible to solvent. The second group, comprised of strongly conserved residues, form intermolecular hydrogen bonds that are shielded from solvent. Site-directed mutagenesis was used to introduce mutations into the RNA-binding site of protein TL5. We found that replacement of residues of the first group does not influence the stability of the TL5.5 S rRNA complex, whereas replacement of residues of the second group leads to destabilization or disruption of the complex. Stereochemical analysis shows that the replacements of residues of the second group always create complexes with uncompensated losses of intermolecular hydrogen bonds. We suggest that these shielded intermolecular hydrogen bonds are responsible for the recognition between the protein and RNA.     

Role of amino acid residues at turns in the conformational stability and folding of human lysozyme

To clarify the role of amino acid residues at turns in the conformational stability and folding of a globular protein, six mutant human lysozymes deleted or substituted at turn structures were investigated by calorimetry, GuHCl denaturation experiments, and X-ray crystal analysis. The thermodynamic properties of the mutant and wild-type human lysozymes were compared and discussed on the basis of their three-dimensional structures. For the deletion mutants, Delta47-48 and Delta101, the deleted residues are in turns on the surface and are absent in human alpha-lactalbumin, which is homologous to human lysozyme in amino acid sequence and tertiary structure. The stability of both mutants would be expected to increase due to a decrease in conformational entropy in the denatured state; however, both proteins were destabilized. The destabilizations were mainly caused by the disappearance of intramolecular hydrogen bonds. Each part deleted was recovered by the turn region like the alpha-lactalbumin structure, but there were differences in the main-chain conformation of the turn between each deletion mutant and alpha-lactalbumin even if the loop length was the same. For the point mutants, R50G, Q58G, H78G, and G37Q, the main-chain conformations of these substitution residues located in turns adopt a left-handed helical region in the wild-type structure. It is thought that the left-handed non-Gly residue has unfavorable conformational energy compared to the left-handed Gly residue. Q58G was stabilized, but the others had little effect on the stability. The structural analysis revealed that the turns could rearrange the main-chain conformation to accommodate the left-handed non-Gly residues. The present results indicate that turn structures are able to change their main-chain conformations, depending upon the side-chain features of amino acid residues on the turns. Furthermore, stopped-flow GuHCl denaturation experiments on the six mutants were performed. The effects of mutations on unfolding-refolding kinetics were significantly different among the mutant proteins. The deletion/substitutions in turns located in the alpha-domain of human lysozyme affected the refolding rate, indicating the contribution of turn structures to the folding of a globular protein.