Conformation and aggregation of melittin: effect of pH and concentration of sodium dodecyl sulfate

The conformation of melittin, a surface-active polypeptide, in solution was studied by CD spectra between 190 and 240 nm. The molecule was essentially unordered (possibly with a trace of helix) in water without salt at neutral pH. Upon deprotonation of four of the six cationic groups at pH 12 the polypeptide became partially helical (about 35%). The addition of NaDodSO₄ to an aqueous melittin solution first caused the solution to become turbid but it became clear again in excess surfactant solution. The conformational changes depended on the molar NaDodSO₄/melittin ratio, R. With R from 2.34 to 23.4, the melittin solution was turbid and the polypeptide conformation was probably a mixture of α-helix and β-sheets. This was supported by the ir spectrum of the turbid solution, which indicated the presence of both conformations. With R = 46.8 or 468 (1 or 10 mM NaDodSO₄) the polypeptide conformation was characteristic of an α-helix, about 70–80% of the molecule, regardless of whether the surfactant was above or below its critical micelle concentration. This compared well with the x-ray results of 92% helix in crystals. The lower helicity of melittin in NaDodSO₄ solution might be attributed to the end effects that destabilize the first and last turn of an helix at its N- and C-terminus, respectively.     

An Automatic Search for Similar Spatial Arrangements of α-Helices and β-Strands in Globular Proteins

Abstract

A fast search algorithm to reveal similar polypeptide backbone structural motifs in proteins is proposed. It is based on the vector representation of a polypeptide chain fold in which the elements of regular secondary structures are approximated by linear segments (Abagyan and Maiorov, J. Biomol. Struct. Dyn. 5, 1267–1279 (1988)). The algorithm permits insertions and deletions in the polypeptide chain fragments to be compared. The fast search algorithm implemented in FASEAR program is used for collecting βαβ supersecondary structure units in a number of α/β proteins of Brookhaven Data Bank. Variation of geometrical parameters specifying backbone chain fold is estimated. It appears that the conformation of the majority of the fragments, although almost all of them are right-handed, is quite different from that of standard βαβ units. Apart from searching for specific type of secondary structure motif, the algorithm allows automatically to identify new recurrent folding patterns in proteins. It may be of particular interest for the development of tertiary template approach for prediction of protein three-dimensional structure as well for constructing artificial polypeptides with goal-oriented conformation.     

Melittin bound to dodecylphosphocholine micelles 1H-NMR assignments and global conformational features

Assignments have been obtained for most of the ¹H-NMR lines of melittin bound to fully deuterated dodecylphosphocholine micelles by combined use of two-dimensional spin echo correlated spectroscopy and one-dimensional NMR methods. Nuclear Overhauser enhancement measurements showed that the mobility of the entire polypeptide chain is reduced by binding of melittin to the detergent micelle and that the amino-terminal and carboxy-terminal halves of the primary structure constitute separate, compact domains within the conformation of micelle-bound melittin. p²H titration experiments showed that the presence of positive charges on the four amino groups of melittin had little influence on the conformation of the micelle-bound polypeptide. Titration of tetrameric melittin with detergent provided evidence that melittin assumes similar conformations as a self-aggregated tetramer and as a monomer bound to micelles.     

Molecular Mechanics Calculations of Proteins. Comparison of Different Energy Minimization Strategies

Abstract

A general strategy for performing energy minimization of proteins using the SYBYL molecular modelling program has been developed. The influence of several variables including energy minimization procedure, solvation, dielectric function and dielectric constant have been investigated in order to develop a general method, which is capable of producing high quality protein structures. Avian pancreatic polypeptide (APP) and bovine pancreatic phospholipase A2 (BP PLA2) were selected for the calculations, because high quality X-ray structures exist and because all classes of secondary structure are represented in the structures. The energy minimized structures were evaluated relative to the corresponding X-ray structures. The overall similarity was checked by calculating RMS distances for all atom positions. Backbone conformation was checked by Ramachandran plots and secondary structure elements evaluated by the length on hydrogen bonds. The dimensions of active site in BP PLA2 is very dependent on electrostatic interactions, due to the presence of the positively charged calcium ion. Thus, the distances between calcium and the calcium-coordinating groups were used as a quality index for this protein. Energy minimized structures of the trimeric PLA2 from Indian cobra (N.n.n. PLA2) were used for assessing the impact of protein-protein interactions. Based on the above mentioned criteria, it could be concluded that using the following conditions: Dielectric constant ? = 4 or 20; a distance dependent dielectric function and stepwise energy minimization, it is possible to reproduce X-ray structures very accurately without including explicit solvent molecules.     

Conformational studies of a melittin-inhibitor complex

The conformation of a melittin—inhibitor complex was studied by solution NMR, solid-state NMR, and circular dichroism. In solution, binding was studied by titrating inhibitor against melittin in dimethyl sulfoxide, methanol, aqueous buffer, and dodecylphosphocholine micelles. The change in chemical shift of Trp19 resonances and the formation of a precipitate at 1:1 molar ratio indicated that the inhibitor was bound to melittin. Solid-state NMR also showed a change in chemical shift of two labeled carbons of melittin near Pro14 and a change in ¹H T ₁ relaxation times when complexed with inhibitor. Rotational resonance experiments of melittin labeled in the proline region indicated a change in conformation for melittin complexed with inhibitor. This observation was also supported by circular dichroism measurements, indicating a reduction in -helical structure for increasing ratios of inhibitor bound to melittin.     

A comparison of the restrained molecular dynamics and distance geometry methods for determining three-dimensional structures of proteins on the basis of interproton distances

A direct comparison of the metric matrix distance geometry and restrained molecular dynamics methods for determining three-dimensional structures of proteins on the basis of interproton distances is presented using crambin as a model system. It is shown that both methods reproduce the overall features of the secondary and tertiary structure (shape and polypeptide fold). The region of conformational space sampled by the converged structures generated by the two methods is similar in size, and in both cases the converged structures are distributed about mean structures which are closer to the X-ray structure than any of the individual structures. The restrained molecular dynamics structures are superior to those obtained from distance geometry as regards local backbone conformation, side chain positions and non-bonding energies.     

Sequence-specific 1H NMR assignments and solution structure of bovine pancreatic polypeptide.

Sequence-specific 1H NMR assignments for the 36 residue bovine pancreatic polypeptide (bPP) have been completed. The secondary and tertiary structure of bPP in solution has been determined from experimental NMR data. It is shown that bPP has a very well-defined C-terminal alpha-helix involving residues 15-32. Although regular secondary structure cannot be clearly defined in the N-terminal region, residues 4-8 maintain a rather ordered conformation in solution. This is attributed primarily to the hydrophobic interactions between this region and the C-terminal helix. The two segments of the structure are joined by a turn which is poorly defined. The four end residues both at the N-terminus and the C-terminus are highly disordered in solution. The overall fold of the bPP molecule is very closely similar to that found in the crystal structure of avian pancreatic polypeptide (aPP). The RMS deviation for backbone atoms of residues 4-8 and 15-32 between the bPP mean structure and the aPP crystal structure is 0.65 A, although there is only 39% identity of the residues. Furthermore, the average conformations of some (mostly from the alpha-helix) side chains of bPP in solution are closely similar to those of aPP in the crystal structure. A large number of side chains of bPP, however, show significant conformational averaging in solution.     

Carrier design: Conformational studies of amino acid (X) and oligopeptide (X-DL-Alam) substituted poly(L-lysine)

The present study was undertaken to examine the influence of the reversal of the sidechain sequential order on the conformation of branched polypeptides. At the same time, the influence of the optically active amino acid joined directly to the poly (L -Lys) backbone and the DL -Ala oligomer grafted as chain-terminating fragment were separately analyzed. Therefore two sets of polypeptides were synthesized corresponding to the general formula poly [Lys-(X_i,)] (XK) and poly[Lys-(DL -Ala_m-X_i)] (AXK) when X = Ala, D -Ala, Leu, D -Leu, Phe, D -Phe, Ile, Pro, Glu.,D -Glu, or His. For coupling amino acid X to polylysine, three types of active ester methods were compared: the use of pentafluorophenyl or pentachlorophenyl ester, and the effect of the addition of an equimolar amount of 1-hydroxybenzotriazole. After cleavage of protecting groups, AXK polypeptides were synthesized by grafting short oligo (DL -Ala) chains to XK by using N-carboxy-DL -Ala anhydride. The CD measurements performed in water solutions of various pH values and ionic strengths were used for classification of the polypeptide conformations as either ordered (helical) or unordered. Different from what was observed with the unsubstituted poly (L -Lys), poly[Lys-(X_i)] type polypeptides can adopt ordered structure even under nearly physiological conditions (pH 7.3, 0.2M NaCl). These data suggest that the introduction of amino acid residue with either (ar) alkyl side chain (Ala, Leu, Phe) or negatively charged side chain (Glu) promotes markedly the formation of ordered structure. Comparison of chiroptical properties of poly [Lys- (DL -Ala_m-X_i)] and of poly [Lys- (X_i)] reveals that side-chain interactions play an important role in the stabilization of ordered solution conformation of AXK type branched polypeptides. The results give rather conclusive evidence that not only hydrophobic interactions, but also ionic attraction, can be involved in the formation and stabilization of helical conformation of branched polypeptides. © 1993 John Wiley & Sons, Inc.     

De novo design,synthesis and solution conformational study of two didehydroundecapeptides: effect of nature and number of amino acids interspersed between Phe residues

De novo design of peptides and proteins has recently surfaced as an approach for investigating protein structure and function. This approach vitally tests our knowledge of protein folding and function, while also laying the groundwork for the fabrication of proteins with properties not precedented in nature. The success relies heavily on the ability to design relatively short peptides that can espouse stable secondary structures. To this end, substitution with α,β‐didehydroamino acids, especially α,β‐didehydrophenylalanine (Δ^zPhe), comes in use for spawning well‐defined structural motifs. Introduction of ΔPhe induces β‐bends in small and 3₁₀‐helices in longer peptide sequences. The present work aims to investigate the effect of nature and the number of amino acids interspersed between two ΔPhe residues in two model undecapeptides, Ac‐Gly‐Ala‐ΔPhe‐Ile‐Val‐ΔPhe‐Ile‐Val‐ΔPhe‐Ala‐Gly‐NH₂ (I) and Boc‐Val‐ΔPhe‐Phe‐Ala‐Phe‐ΔPhe‐Phe‐Leu‐Ala‐ΔPhe‐Gly‐OMe (II). Peptide I was synthesized using solid‐phase chemistry and characterized using circular dichroism spectroscopy. Peptide II was synthesized using solution‐phase chemistry and characterized using circular dichroism and nuclear magnetic resonance spectroscopy. Peptide I was designed to examine the effect of incorporating β‐strand‐favoring residues like valine and isoleucine as spacers between two ΔPhe residues on the final conformation of the resulting peptide. Circular dichroism studies on this peptide have shown the existence of a 3₁₀‐helical conformation. Peptide II possesses three amino acids as spacers between ΔPhe residues and has been reported to adopt a mixed 3₁₀/α‐helical conformation using circular dichroism and nuclear magnetic resonance spectroscopy studies. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Interaction of polypeptides with the gastric (H+ + K+)ATPase: melittin,synthetic analogs,and a potential intracellular regulatory protein

The 26 amino acid bee venom toxin, melittin, is an amphipathic helical polypeptide which inhibits the gastric (H⁺ + K⁺)ATPase. The site of interaction with the (H⁺ + K⁺)ATPase was shown to be the alpha subunit of the (H⁺ + K⁺)ATPase in studies using [¹²⁵I]azidosalicylyl melittin, a radioactive photoaffinity analog of melittin. A synthetic amphipathic polypeptide (Trp3) containing tryptophan, which exhibits a structure similar to that of melittin, also inhibited the gastric (H⁺ + K⁺)ATPase, and prevented labeling by [¹²⁵I]azidosalicylyl melittin. These findings suggested that melittin and the synthetic amphipathic helical polypeptide were bound to the same or overlapping site(s). In the present studies, novel tritiated photoaffinity analogs of Trp3 containing benzoylphenylalanine (in place of tryptophan) were used to photoaffinity label the (H⁺ + K⁺)ATPase. These studies help to establish that the (H⁺ + K⁺)ATPase contains a binding site for polypeptides which exhibit an amphipathic helical motif. The precise amino acid sequence of the polypeptide appears to be of secondary importance for interaction with the (H⁺ + K⁺)ATPase as long as the alpha helical motif is present. The benzoylphenylalanine containing polypeptides are ideal for mapping the binding site on the (H⁺ + K⁺)ATPase. Using an antibody which recognizes this amphipathic helical (melittin-like) motif, we have demonstrated that the gastric parietal cell contains a 67 kDa melittin-like protein. This protein was associated with the gastric parietal cell apical membrane in the stimulated (secreting) state, but not in the resting (non-secreting) state. The binding site for the gastric melittin-like protein appears to overlap with the melittin binding site on the alpha subunit of the (H⁺ + K⁺)ATPase. The potential physiological significance of the melittin binding site and the overlapping binding site for this newly identified endogenous melittin-like protein on the (H⁺ + K⁺)ATPase to regulated HCl secretion by the parietal cell is presently under investigation. Evidence is presented which demonstrates that melittin binds to other E₁-E₂ ion pumps, raising the possibility that there might exist similar intracellular proteins which interact with other ion pumps.     

Structural role of a conserved active site cis proline in the Thermotoga maritima acetyl esterase from the carbohydrate esterase family 7

A conserved cis proline residue located in the active site of Thermotoga maritima acetyl esterase (TmAcE) from the carbohydrate esterase family 7 (CE7) has been substituted by alanine. The residue was known to play a crucial role in determining the catalytic properties of the enzyme. To elucidate the structural role of the residue, the crystal structure of the Pro228Ala variant (TmAcE_P228A) was determined at 2.1 Å resolution. The replacement does not affect the overall secondary, tertiary, and quaternary structures and moderately decreases the thermal stability. However, the wild type cis conformation of the 227–228 peptide bond adopts a trans conformation in the variant. Other conformational changes in the tertiary structure are restricted to residues 222–226, preceding this peptide bond and are located away from the active site. Overall, the results suggest that the conserved proline residue is responsible for the cis conformation of the peptide and shapes the geometry of the active site. Elimination of the pyrrolidine ring results in the loss of van der Waals and hydrophobic interactions with both the alcohol and acyl moeities of the ester substrate, leading to significant impairment of the activity and perturbation of substrate specificity. Furthermore, a cis‐to‐trans conformational change arising out of residue changes at this position may be associated with the evolution of divergent activity, specificity, and stability properties of members constituting the CE7 family. Proteins 2017; 85:694–708. © 2016 Wiley Periodicals, Inc.     

A genetic algorithm that seeks native states of peptides and proteins.

We describe a computer algorithm to predict native structures of proteins and peptides from their primary sequences, their known native radii of gyration, and their known disulfide bonding patterns, starting from random conformations. Proteins are represented as simplified real-space main chains with single-bead side chains. Nonlocal interactions are taken from structural database-derived statistical potentials, as in an earlier treatment. Local interactions are taken from simulations of (phi, psi) energy surfaces for each amino acid generated using the Biosym Discover program. Conformational searching is done by a genetic algorithm-based method. Reasonable structures are obtained for melittin (a 26-mer), avian pancreatic polypeptide inhibitor (a 36-mer), crambin (a 46-mer), apamin (an 18-mer), tachyplesin (a 17-mer), C-peptide of ribonuclease A (a 13-mer), and four different designed helical peptides. A hydrogen bond interaction was tested and found to be generally unnecessary for helical peptides, but it helps fold some sheet regions in these structures. For the few longer chains we tested, the method appears not to converge. In those cases, it appears to recover native-like secondary structures, but gets incorrect tertiary folds.     

Stability of secondary structural elements in a solvent-free environment: the α helix

The stability of the α helix as an element of secondary structure is examined in the absence of solvation, in the gas phase. Mass-analyzed ion kinetic energy (MIKE) spectrometry was applied to measure intercharge repulsion and intercharge distance in multiply protonated melittin, a polypeptide known to possess a stable helical structure in a number of different environments. The experimental results, interpreted in combination with molecular mechanics calculations, suggest that triply charged melittin retains its secondary structure in the gas phase. The stability if the α-helical conformation of the polypeptide in the absence of solvent molecules reflects the fact that a network of intrinsic helical hydrogen bonds is energetically more favorable than unfolded conformations. © 1997 Wiley-Liss, Inc.     

Exploring adverse effects of puerarin on catalase by multiple spectroscopic investigations and docking studies in vitro

Puerarin belongs to one of the most familiar tradition medicines of China, but adverse effects of puerarin during the clinical treatment have been found for years, the mechanisms of which remain unclear. In this study, toxic mechanisms of puerarin on the structure and function of catalase were studied by multiple spectroscopic techniques, isothermal titration calorimetric measurement, and molecular docking methods in vitro. Results showed puerarin could inhibit the activity of catalase due to direct interactions between puerarin and catalase, resulting in conformational and functional changes of the enzyme. To be specific, puerarin statically quenched catalase fluorescence, bound into the active site channel of catalase, hindered the path of the catalytic substrate (H₂O₂), affected its skeleton conformation and secondary structure, and interacted with the enzymatically related residues through hydrophobic interactions (ΔH > 0 and ΔS > 0) spontaneously (ΔG < 0). This study illustrates potential adverse effects of puerarin, which should catch more attentions during the clinical diagnosis.     

Structural and thermodynamic analyses of the interaction between melittin and lipopolysaccharide

Lipopolysaccharide (LPS), the major constituent of the outer membrane of Gram-negative bacteria, is the very first site of interactions with the antimicrobial peptides. In this work, we have determined a solution conformation of melittin, a well-known membrane active amphiphilic peptide from honey bee venom, by transferred nuclear Overhauser effect (Tr-NOE) spectroscopy in its bound state with lipopolysaccharide. The LPS bound conformation of melittin is characterized by a helical structure restricted only to the C-terminus region (residues A15-R24) of the molecule. Saturation transfer difference (STD) NMR studies reveal that several C-terminal residues of melittin including Trp19 are in close proximity with LPS. Isothermal titration calorimetry (ITC) data demonstrates that melittin binding to LPS or lipid A is an endothermic process. The interaction between melittin and lipid A is further characterized by an equilibrium association constant (K_a) of 2.85 × 10⁶ M^− 1 and a stoichiometry of 0.80, melittin/lipid A. The estimated free energy of binding (ΔG⁰), − 8.8 kcal mol^− 1, obtained from ITC experiments correlates well with a partial helical structure of melittin in complex with LPS. Moreover, a synthetic peptide fragment, residues L13-Q26 or mel-C, derived from the C-terminus of melittin has been found to contain comparable outer membrane permeabilizing activity against Escherichia coli cells. Intrinsic tryptophan fluorescence experiments of melittin and mel-C demonstrate very similar emission maxima and quenching in presence of LPS micelles. The Red Edge Excitation Shift (REES) studies of tryptophan residue indicate that both peptides are located in very similar environment in complex with LPS. Collectively, these results suggest that a helical conformation of melittin, at its C-terminus, could be an important element in recognition of LPS in the outer membrane.     

Conformational Studies of a Melittin—Inhibitor Complex

The conformation of a melittin—inhibitor complex was studied by solution NMR, solid-state NMR, and circular dichroism. In solution, binding was studied by titrating inhibitor against melittin in dimethyl sulfoxide, methanol, aqueous buffer, and dodecylphosphocholine micelles. The change in chemical shift of Trp19 resonances and the formation of a precipitate at 1:1 molar ratio indicated that the inhibitor was bound to melittin. Solid-state NMR also showed a change in chemical shift of two labeled carbons of melittin near Pro14 and a change in ¹H T ₁ relaxation times when complexed with inhibitor. Rotational resonance experiments of melittin labeled in the proline region indicated a change in conformation for melittin complexed with inhibitor. This observation was also supported by circular dichroism measurements, indicating a reduction in α-helical structure for increasing ratios of inhibitor bound to melittin.     

Analysis of the conformation and thermal stability of the high-affinity IgE Fc receptor β chain polymorphic proteins*

The high-affinity IgE Fc receptor (FcεRI) β chain acts as a signal amplifier through the immunoreceptor tyrosine-based activation motif in its C-terminal intracellular region. Polymorphisms in FcεRI β have been linked to atopy, asthma, and allergies. We investigated the secondary structure, conformation, and thermal stability of FcεRI β polymorphic (β-L172I, β-L174V, and β-E228G) proteins. Polymorphisms did not affect the secondary structure and conformation of FcεRI β. However, we calculated Gibbs free energy of unfolding (ΔG_unf) and significant differences were observed in ΔG_unf values between the wild-type FcεRI β (β-WT) and β-E228G. These results suggested that β-E228G affected the thermal stability of FcεRI β. The role of β-E228G in biological functions and its involvement in allergic reactions have not yet been elucidated in detail; therefore, differences in the thermal stability of β-E228G may affect the function of FcεRI β.     

The influence of melittin on the rotation of band 3 protein in the human erythrocyte membrane

The rotational mobility of band 3, a protein constituent of the human erythrocyte membrane, was measured by observing the flash-induced transient dichroism of the triplet probe eosin maleimide. In the presence of melittin, a pharmacologically active polypeptide from honey bee (Apis mellifera) venom, a dose-dependent loss of rotational mobility was detected. With acetylated melittin, the ability to immobilise is reduced. Succinylated melittin, however, is devoid of immobilising activity.The possible relevance of these findings to the normal mode of action of melittin was examined by comparing the relative abilities of the native, acetylated and succinylated melittins to lyse erythrocytes and synergise with phospholipase A₂, another constituent of bee venom. For both these properties, the order of effectiveness is native melittin > acetyl melittin > succinyl melittin = 0, the same as their order of effectiveness in immobilising band 3.A mechanism is proposed in which melittin is anchored in the membrane by its hydrophobic N-terminus, while its cationic C-terminal moiety binds to negatively charged residues on membrane proteins. This leads either directly or indirectly to protein aggregation and hence loss of mobility. From a detailed comparison of the different effects of the melittin derivatives, it is concluded that melittin may function in vivo by aggregating membrane proteins in order to allow phospholipase A₂ to gain access to the membrane bilayer and commence catalysis.     

Molecular dynamics simulations of conformation and chain length dependent terahertz spectra of alanine polypeptides

Terahertz absorption spectra of alanine polypeptides in water were simulated with classical molecular dynamics at 310 K. Vibrational modes and oscillator strengths were calculated based on a quasi-harmonic approximation. Absorption spectra of Ala_n (n = 5, 15, 30) with different chain lengths and Ala₁₅ in coiled and helical conformations were studied in 10–40 cm^? 1 bandwidth. Simulation results indicated both the chain length and the conformation have significant influences on THz spectra of alanine polypeptides. With the increase of chain length, the average THz absorption intensity increases. Compared with the helical Ala₁₅ polypeptide, the THz spectra of coiled one shows stronger absorption peaks. These results were explained from different numbers of hydrogen bonds formed between polypeptides and the surrounding water molecules.     

Context-Dependent Remodeling of Structure in Two Large Protein Fragments

Protein folding involves the formation of secondary structural elements from the primary sequence and their association with tertiary assemblies. The relation of this primary sequence to a specific folded protein structure remains a central question in structural biology. An increasing body of evidence suggests that variations in homologous sequence ranging from point mutations to substantial insertions or deletions can yield stable proteins with markedly different folds. Here we report the structural characterization of domain IV (D4) and ΔD4 (polypeptides with 222 and 160 amino acids, respectively) that differ by virtue of an N-terminal deletion of 62 amino acids (28% of the overall D4 sequence). The high-resolution crystal structures of the monomeric D4 and the dimeric ΔD4 reveal substantially different folds despite an overall conservation of secondary structure. These structures show that the formation of tertiary structures, even in extended polypeptide sequences, can be highly context dependent, and they serve as a model for structural plasticity in protein isoforms.