Stainless steel in coastal seawater: sunlight counteracts biologically enhanced cathodic kinetics

The influence of sunlight of varying intensity on the performance of UNS S30400 stainless steel (SS) was explored under conditions of natural biofilm development in coastal seawater. In a series of tests performed outdoors under an opaque roof, a range of shades were fashioned to impart varied amounts of diurnal light. These were an ambient level where the underwater illumination was ~ 5% of full sunlight, two intermediate ranges of lighting with ~ 2.5% and ~ 1% of the daylight, and a condition of full darkness. In comparison with the dark, increments of sunlight rendered the SS progressively less aggressive as cathodes in galvanic couples with UNS C70600 alloy. Likewise, welded SS with pre-initiated localized corrosion sites exhibited substantially lower rates of propagation with light. Thus, biofilms and sunlight affected cathodic kinetics in opposite ways. Surface analytical tests showed that the accumulation of manganese (Mn) within the biofilms was small relative to reports from waters of lower salinity. These results not only reveal that extremely low amounts of sunlight are adequate to offset the microbial effect, but also highlight the lack of convincing evidence for Mn cycling as a potent mechanism for enhanced cathodic kinetics in full-strength seawater.     

Molecular methods resolve the bacterial composition of natural marine biofilms on galvanically coupled stainless steel cathodes

Navy vessels consist of various metal alloys and biofilm accumulation at the metal surface is thought to play a role in influencing metal deterioration. To develop better strategies to monitor and control metallic biofilms, it is necessary to resolve the bacterial composition within the biofilm. This study aimed to determine if differences in electrochemical current could influence the composition of dominant bacteria in a metallic biofilm, and if so, determine the level of resolution using metagenomic amplicon sequencing. Current was generated by creating galvanic couples between cathodes made from stainless steel and anodes made from carbon steel, aluminum, or copper nickel and exposing them in the Delaware Bay. Stainless steel cathodes (SSCs) coupled to aluminum or carbon steel generated a higher mean current (0.39 mA) than that coupled to copper nickel (0.17 mA). Following 3 months of exposure, the bacterial composition of biofilms collected from the SSCs was determined and compared. Dominant bacterial taxa from the two higher current SSCs were different from that of the low-current SSC as determined by DGGE and verified by Illumina DNA-seq analysis. These results demonstrate that electrochemical current could influence the composition of dominant bacteria in metallic biofilms and that amplicon sequencing is sufficient to complement current methods used to study metallic biofilms in marine environments.     

The influence of sunlight on the localized corrosion of UNS S31600 in natural seawater

Tests were conducted on the performance of UNS S31600 stainless steel (SS) in a natural day/night cycle vs full darkness under conditions of natural marine biofilm accumulation. In quiescent flowing seawater tests in the laboratory as well as under natural immersion in the sea, diffuse sunlight (～10% of natural) counteracted the influence of marine biofilms and produced substantial inhibition of the corrosion of SS. Thus, the probabilities (percentage attack) and propagation rates (depths of attack) in multiple crevice tests were substantially lower in the day/night cycle than in the dark. A benefit was also observed for welded SS in terms of the time to corrosion initiation and the mass loss. SS in the passive state showed broader passive regions, well-defined breakdown potentials and markedly smaller anodic and cathodic current densities under the diurnal cycle. The overall reduction in corrosion is attributed to a combination of electrochemical photoinhibition and simultaneous photoinactivation of microbially mediated metal redox reactions linked to cathodic kinetics. These data offer fresh insights into the behaviour of SS under practical seawater situations and the proposed potential use of illumination in the mitigation of biologically influenced consequences.     

The influence of sunlight on the localized corrosion of UNS S31600 in natural seawater

Tests were conducted on the performance of UNS S31600 stainless steel (SS) in a natural day/night cycle vs full darkness under conditions of natural marine biofilm accumulation. In quiescent flowing seawater tests in the laboratory as well as under natural immersion in the sea, diffuse sunlight (～10% of natural) counteracted the influence of marine biofilms and produced substantial inhibition of the corrosion of SS. Thus, the probabilities (percentage attack) and propagation rates (depths of attack) in multiple crevice tests were substantially lower in the day/night cycle than in the dark. A benefit was also observed for welded SS in terms of the time to corrosion initiation and the mass loss. SS in the passive state showed broader passive regions, well-defined breakdown potentials and markedly smaller anodic and cathodic current densities under the diurnal cycle. The overall reduction in corrosion is attributed to a combination of electrochemical photoinhibition and simultaneous photoinactivation of microbially mediated metal redox reactions linked to cathodic kinetics. These data offer fresh insights into the behaviour of SS under practical seawater situations and the proposed potential use of illumination in the mitigation of biologically influenced consequences.     

Influence of Cr3+ on microbial cluster formation in biofilm and on steel corrosion

Pit corrosion of mild steel in seawater increased with Cr³⁺ concentration. SEM observations showed that increasing Cr³⁺ concentration caused microbes in biofilm on the steel surface to aggregate forming clusters. AFM images suggested that pit corrosion occurred largely on the mild steel surface between clusters, and only little corrosion on the surface covered by microbes.     

Effect of the cathode potential and sulfate ions on nitrate reduction in a microbial electrochemical denitrification system

Recently, bioelectrochemical systems have been demonstrated as advantageous for denitrification. Here, we investigated the nitrate reduction rate and bacterial community on cathodes at different cathode potentials [?300, ?500, ?700, and ?900 mV vs. standard hydrogen electrode (SHE)] in a two-chamber microbial electrochemical denitrification system and effects of sulfate, a common nitrate co-contaminant, on denitrification efficiency. The results indicated that the highest nitrate reduction rates (3.5 mg L^?1 days^?1) were obtained at a cathode potential of ?700 mV, regardless of sulfate presence, while a lower rate was observed at a more negative cathode potential (?900 mV). Notably, although sulfate ions generally inhibited nitrate reduction, this effect was absent at a cathode potential of ?700 mV. Polymerase chain reaction–denaturing gradient gel electrophoresis revealed that bacterial communities on the graphite-felt cathode were significantly affected by the cathode potential change and sulfate presence. Shinella-like and Alicycliphilus-like bacterial species were exclusively observed on cathodes in reactors without sulfate. Ochrobactrum-like and Sinorhizobium-like bacterial species, which persisted at different cathode potentials irrespective of sulfate presence, were shown to contribute to bioelectrochemical denitrification. This study suggested that a cathode potential of around ?700 mV versus SHE would ensure optimal nitrate reduction rate and counteract inhibitory effects of sulfate. Additionally, sulfate presence considerably affects denitrification efficiency and microbial community of microbial electrochemical denitrification systems.     

Comparison of microbial communities involved in souring and corrosion in offshore and onshore oil production facilities in Nigeria

Samples were obtained from the Obigbo field, located onshore in the Niger delta, Nigeria, from which oil is produced by injection of low-sulfate groundwater, as well as from the offshore Bonga field from which oil is produced by injection of high-sulfate (2,200 ppm) seawater, amended with 45 ppm of calcium nitrate to limit reservoir souring. Despite low concentrations of sulfate (0–7 ppm) and nitrate (0 ppm), sulfate-reducing bacteria (SRB) and heterotrophic nitrate-reducing bacteria (NRB) were present in samples from the Obigbo field. Biologically active deposits (BADs), scraped from corrosion-failed sections of a water- and of an oil-transporting pipeline (both Obigbo), had high counts of SRB and high sulfate and ferrous iron concentrations. Analysis of microbial community composition by pyrosequencing indicated anaerobic, methanogenic hydrocarbon degradation to be a dominant process in all samples from the Obigbo field, including the BADs. Samples from the Bonga field also had significant activity of SRB, as well as of heterotrophic and of sulfide-oxidizing NRB. Microbial community analysis indicated high proportions of potentially thermophilic NRB and near-absence of microbes active in methanogenic hydrocarbon degradation. Anaerobic incubation of Bonga samples with steel coupons gave moderate general corrosion rates of 0.045–0.049 mm/year, whereas near-zero general corrosion rates (0.001–0.002 mm/year) were observed with Obigbo water samples. Hence, methanogens may contribute to corrosion at Obigbo, but the low general corrosion rates cannot explain the reasons for pipeline failures in the Niger delta. A focus of future work should be on understanding the role of BADs in enhancing under-deposit pitting corrosion.     

Evaluation of microbial fuel cell operation using algae as an oxygen supplier: carbon paper cathode vs. carbon brush cathode

Microbial fuel cell (MFC) and its cathode performances were compared with use of carbon fiber brush and plain carbon paper cathode electrodes in algae aeration. The MFC having carbon fiber brush cathode exhibited a voltage of 0.21 ± 0.01 V (1,000 Ω) with a cathode potential of around ?0.14 ± 0.01 V in algal aeration, whereas MFC with plain carbon paper cathode resulted in a voltage of 0.06 ± 0.005 V with a cathode potential of ?0.39 ± 0.01 V. During polarizations, MFC equipped with carbon fiber brush cathode showed a maximum power density of 30 mW/m², whereas the MFC equipped with plain carbon paper showed a power density of 4.6 mW/m². In algae aeration, the internal resistance with carbon fiber brush cathode was 804 Ω and with plain carbon paper it was 1,210 Ω. The peak currents of MFC operation with carbon fiber brush and plain carbon paper cathodes were ?31 mA and ?850 µA, respectively.     

Grafting of antibacterial polymers on stainless steel via surface‐initiated atom transfer radical polymerization for inhibiting biocorrosion by Desulfovibrio desulfuricans

To enhance the biocorrosion resistance of stainless steel (SS) and to impart its surface with bactericidal function for inhibiting bacterial adhesion and biofilm formation, well‐defined functional polymer brushes were grafted via surface‐initiated atom transfer radical polymerization (ATRP) from SS substrates. The trichlorosilane coupling agent, containing the alkyl halide ATRP initiator, was first immobilized on the hydroxylated SS (SS‐OH) substrates for surface‐initiated ATRP of (2‐dimethylamino)ethyl methacrylate (DMAEMA). The tertiary amino groups of covalently immobilized DMAEMA polymer or P(DMAEMA), brushes on the SS substrates were quaternized with benzyl halide to produce the biocidal functionality. Alternatively, covalent coupling of viologen moieties to the tertiary amino groups of P(DMAEMA) brushes on the SS surface resulted in an increase in surface concentration of quaternary ammonium groups, accompanied by substantially enhanced antibacterial and anticorrosion capabilities against Desulfovibrio desulfuricans in anaerobic seawater, as revealed by antibacterial assay and electrochemical studies. With the inherent advantages of high corrosion resistance of SS, and the good antibacterial and anticorrosion capabilities of the viologen‐quaternized P(DMAEMA) brushes, the functionalized SS is potentially useful in harsh seawater environments and for desalination plants. Biotechnol. Bioeng. 2009;103: 268–281. © 2009 Wiley Periodicals, Inc.     

Effect of W–TiO2 composite to control microbiologically influenced corrosion on galvanized steel

Microorganisms tend to colonize on solid metal/alloy surface in natural environment leading to loss of utility. Microbiologically influenced corrosion or biocorrosion usually increases the corrosion rate of steel articles due to the presence of bacteria that accelerates the anodic and/or cathodic corrosion reaction rate without any significant change in the corrosion mechanism. An attempt was made in the present study to protect hot-dip galvanized steel from such attack of biocorrosion by means of chemically modifying the zinc coating. W–TiO₂ composite was synthesized and incorporated into the zinc bath during the hot-dipping process. The surface morphology and elemental composition of the hot-dip galvanized coupons were analyzed by scanning electron microscopy and energy dispersive X-ray spectroscopy. The antifouling characteristics of the coatings were analyzed in three different solutions including distilled water, seawater, and seawater containing biofilm scrapings under immersed conditions. Apart from electrochemical studies, the biocidal effect of the composite was evaluated by analyzing the extent of bacterial growth due to the presence and absence of the composite based on the analysis of total extracellular polymeric substance and total biomass using microtiter plate assay. The biofilm-forming bacteria formed on the surface of the coatings was cultured on Zobell Marine Agar plates and studied. The composite was found to be effective in controlling the growth of bacteria and formation of biofilm thereafter.     

The monitoring possibility of some mammalian cells for zinc concentrations on metallic materials

Zinc plating is widely used to protect steels against corrosion. However, the possibility of a high environmental risk for zinc has been recently discussed among advanced countries and more environmentally-friendly substitutes are required urgently. Therefore, monitoring zinc concentration changes on metallic materials such as steel is very important. We chose to measure zinc concentration changes in some mammalian cells and confirmed that V79 cells were highly sensitive to changes in zinc concentrations. In this study, the following process was applied to the proprietary production for tin-zinc alloy films on steel using V79 cells. Specimens were immersed in PBS to produce extracts. Zinc concentrations in the extracts almost corresponded to zinc concentrations on steel surfaces. When extracts were added to a V79 cell culture, colony formation was inhibited, and inhibition increased with increases in zinc concentrations. Changes in zinc concentrations on steel surfaces with heat treatment could be monitored relatively well by V79 cells, even though the results were still semi-quantitative.     

A Pilot Study on Neopterin Levels and Tryptophan Degradation in Zinc-Exposed Galvanization Workers

Hot-dip galvanization is a zinc-coating process to protect the metal items from corrosion. Zinc oxide nanoaerosol fume rising from hot metal bath surface in nano dimensions contains the greatest risk for workers in galvanization process. In the present study, it was evaluated whether inhalation of zinc causes any alteration in cellular immunity and tryptophan degradation by measuring neopterin, tryptophan, kynurenine, and zinc levels in 63 male galvanization workers and 23 male office personnel as controls. Serum and urinary zinc levels were found as 14.90?±?0.90 and 102?±?4.7 μg/dL in workers while 12.87?±?1.45 and 75?±?4.2 μg/dL in controls, respectively (both, p?<?0.05). Similarly, the mean urinary neopterin levels and serum neopterin and kynurenine levels were found to be statistically higher in galvanization workers than the controls (all, p?<?0.05). Significant correlations were found between urinary neopterin levels and kynurenine to tryptophan ratio or serum zinc levels. The results indicated cellular immune activation by occupational zinc exposure. It was estimated that neopterin, in parallel with kynurenine pathway, could reflect occupational exposure to zinc nanoaerosols and might be useful in early diagnosis of immune alterations due to nano-scale exposures.     

The role of Gracilaria lemaneiformis in eliminating the dissolved inorganic carbon released from calcification and respiration process of Chlamys farreri

Respiration and calcification rate were estimated to quantify the effect of Zhikong scallop Chlamys farreri on marine CO₂ system in Sanggou Bay, China. The C. farreri population in Sanggou Bay sequestered 78.06?±?5.76 g C m^?2 y^?1 for shell formation, while the CO₂ fluxes due to calcification and respiration were 53.95?±?3.98 and 71.69?±?6.51 g C m^?2 y^?1, respectively. In order to eliminate the additional CO₂ released from calcification and respiration process of C. farreri, Gracilaria lemaneiformis were introduced into the integrated system and its role was validated by in situ mesocosm methods. Eight mesocosms (1,000 L) were deployed over 42-h period and consisted of four treatments: seaweed-only, scallop-only (SP), seaweed integrated with scallop (SS), and control (C). The aqueous CO₂ concentration and partial pressure of CO₂ in SP treatments were significantly higher than the other three treatments (p?<?0.01), while there were no difference between SS treatments and C treatments (p?>?0.05). Furthermore, compared with the SP treatments, the presence of the G. lemaneiformis can keep the seawater pH stable. These findings suggest that seaweed and shellfish integrated aquaculture practice cannot only reduce dissolved inorganic carbon but also can alleviate ocean acidification.     

Influence of fouling on the efficiency of sacrificial anodes in providing cathodic protection in Southeast Asian tropical seawater

Aluminum and zinc based sacrificial anodes are routinely used to provide corrosion protection to metals (typically steel) exposed to seawater, for example in steel pipelines and storage tanks. However, the high fouling rates experienced in South East Asia means that both the anodes and the metals to be protected rapidly become coated with macrofoulers, which could potentially prevent the anodes from being effective. The present study, involving exposure tests of up to 18 months, indicates that both aluminum and zinc sacrificial anodes remain effective even after being completely coated with biofouling. Furthermore, it was easier to remove the biofouling on the cathodically protected samples than on their unprotected counterparts, possibly due to the higher local pH produced by cathodic protection at the metal and seawater interface.     

Anaemia, Folate, Zinc and Copper Deficiencies Among Adolescent Schoolgirls in Eastern Sudan

Anaemia is a widespread problem especially in the tropics. Among adolescent girls, it has negative consequences on growth, school performance, morbidity and reproductive performance. A cross-sectional study was conducted to investigate the prevalence of anaemia, iron, folate, zinc and copper deficiencies amongst adolescent schoolgirls in New Halfa, eastern Sudan, and to examine the relationship of these micronutrients with haemoglobin (Hb) levels. Out of 187 adolescent schoolgirls, 181 (96.8%) had anaemia (Hb?<?12 g/dl); 21% had mild anaemia (Hb 11.0–11.9 g/dl); 66.8.1% had moderate anaemia (Hb 8.0–10.9 g/dl), and 12.1% had severe anaemia (Hb?<?8 g/dl), respectively. Iron deficiency (S-ferritin?<?12 μg/l), iron deficiency anaemia (<12 m/dl and S- ferritin?<?12 μg/l) and folate deficiency (S-folate?<?3 ng/ml) were prevalent in 17.6%, 16.5% and 69% of these girls, respectively. Nine percent and 5.9% of these girls had zinc (<75 μg/ml) and copper deficiency (<75 μg/ml), respectively. Twenty-six (14%) girls had ≥2 micronutrient deficiencies. S-ferritin and zinc were significantly lower in patients with severe anaemia. Haemoglobin levels were significantly positively correlated with zinc levels (r?=?0.161, P?=?0.03) and with copper levels (r?=?0.151, P?=?0.03). Thus, interventions are required to prevent and control anaemia in this setting. Further research is needed.     

Parathyroid hormone-related protein: a calcium regulatory factor in sea bream (Sparus aurata L.) larvae

The effects of an N-terminal peptide (amino acids 1-38) of Fugu parathyroid hormone-related protein (PTHrP 1-38) on calcium regulation of larval sea bream were investigated in seawater (36 per thousand) and after transfer to dilute seawater (12 per thousand). Exposure to PTHrP 1-38 evoked a 1.5-fold increase in calcium influx in both full-strength and dilute seawater. Calcium influx in dilute seawater-adapted larvae was roughly one-half that observed in full-strength seawater controls. PTHrP 1-38 also reduced drinking of fish in seawater but, at all concentrations tested, was without effect in dilute seawater. The amount of water imbibed was 55% lower in dilute seawater than in seawater. PTHrP 1-38 exposure affected the calcium influx route: the main contribution of calcium uptake shifted from intestinal absorption to extraintestinal uptake, probably by the induction of a dose-dependent increase in branchial (active) transport. Moreover, seawater-adapted fish exposed to 1 nM and 10 mM PTHrP 1-38 experienced a 2.5-fold reduction in overall calcium efflux. Overall, the calciotropic action of PTHrP 1-38 resulted in a dose-dependent increase in net calcium balance.     

Effect of Zinc Supplementation on Thyroid Hormone Metabolism of Adolescents with Down Syndrome

Studies have evidenced that zinc metabolism is altered in the presence of Down syndrome, and zinc seems to have a relationship with the metabolic alterations usually present in this syndrome. In this work, the effect of zinc supplementation on thyroid hormone metabolism was evaluated in adolescents with Down syndrome. A prospective study was carried out on 16 adolescents with Down syndrome (age: 10–19 years) who were randomized for treatment with 30 mg zinc daily for 4 weeks. Diet evaluation was accomplished y using a 3-day dietary record, and the analysis was performed by the NutWin program, version 1.5. Anthropometric measurements were performed for evaluation of body composition. The Zn-related nutritional status of the groups was evaluated by means of zinc concentration determinations in plasma and erythrocytes using the method of atomic absorption spectroscopy, and the thyroid hormone was obtained by radioimmunoassay. The diet of patients with Down syndrome, before and after the intervention presented reduced energy level and adequate zinc concentrations. Mean plasma zinc values were 59.2?±?13.2 and 71.0?±?21.9 μg/dL before and after the intervention, respectively. Erythrocyte concentrations of the mineral before supplementation, instead, were 51.5 μg/dL?±?11.1 μg Zn/gHb, and at the end of the experiment, they were 42.9?±?8/5 μg Zn/gHb, with a significant statistical difference (p?<?0.05). Serum concentrations of T₄ hormone before and after zinc supplementation were 1.26?±?0.20 and 1.54?±?0.63 pg/mL, respectively. Mean T₃ values before intervention were 2.47?±?037 pg/mL and, after supplementation, 2.25?±?0.67 pg/mL, without significant statistical difference (p?>?0.05). Intervention with zinc showed to be effective in the stabilization of the concentrations of this mineral in plasma and erythrocytes, but had no influence on the metabolism of thyroid hormones.     

Effect of Seawater–Sewage Cross-Transplants on Bacterial Metabolism and Diversity

Bioassays experiments were conducted to determine the metabolic and community composition response of bacteria to transplants between relatively pristine coastal seawater and sewage-impacted seawater. There were four treatments: (1) pristine seawater bacteria?+?pristine seawater (Pb?+?Pw), (2) sewage-impacted bacteria?+?sewage-impacted water (Sb?+?Sw), (3) pristine seawater bacteria?+?sewage-impacted water (Pb?+?Sw), and (4) sewage-impacted bacteria?+?pristine seawater (Sb?+?Pw). Sewage-derived DOC was more labile and readily utilized by bacteria, which favored the growth of high nucleic acid (HNA) bacteria, resulting in high bacterial production (BP, 113?±?4.92 to 130?±?15.8 μg C l^?1?day^?1) and low respiration rate (BR, <67?±?11.3 μg C l^?1?day^?1), as well as high bacterial growth efficiency (BGE, 0.68?±?0.09 to 0.71?±?0.05). In contrast, at the relatively pristine site, bacteria utilized natural marine-derived dissolved organic matter (DOM) at the expense of lowering their growth efficiency (BGE, <0.32?±?0.02) with low BP (<62?±?6.3 μg C l^?1?day^?1) and high BR 133?±?14.2 μg C l^?1?day^?1). Sewage DOM input appeared to alter the partitioning of carbon between respiration and production of bacteria, resulting in a shift toward higher BGE, which would not enhance oxygen consumption. Taxonomic classification based on 454 pyrosequencing reads of the 16S rRNA gene amplicons revealed that changes in bacterial community structure occurred when seawater bacteria were transferred to the eutrophic sewage-impacted water. Sewage DOM fueled the growth of Gammma-proteobacteria and Epsilson-proteobacteria and reduced the bacterial richness, but the changes in the community were not apparent when sewage-impacted bacteria were transferred to pristine seawater.     

Microbially influenced corrosion of galvanized steel pipes in aerobic water systems

Aims: To investigate the role of heterotrophic bacteria in the corrosion of galvanized steel in the presence of water. Methods and Results: Samples were taken from corroding galvanized steel pipes conveying water for specialist applications, and heterotrophic bacteria were isolated and cultured. The majority of bacteria were Gram‐negative aerobes and included Pseudomonas sp., Bacillus pumilus, Afipia spp. and Blastobacter denitrificans/Bradyrhizobium japonicum. Zinc tolerance was assessed through growth and zinc disc diffusion experiments. In general, zinc negatively influenced growth rates. An unidentified yeast also isolated from the system demonstrated a high tolerance to zinc at concentrations up to 4 g l^?1. Coupon experiments were performed to assess corrosion by the bacteria on galvanized steel and steel coupons. The majority of isolates as pure culture biofilms (69%) accelerated corrosion of galvanized coupons, assessed as zinc release, relative to sterile control coupons (P < 0·05). Pure culture biofilms did not increase the corrosion of steel, with four isolates demonstrating protective effects. Conclusions: Pure culture biofilms of heterotrophic bacteria isolated from a corroding galvanized pipe system were found to accelerate the corrosion of galvanized steel coupons. Significance and Impact of the Study: Microbially influenced corrosion is a potential contributor to sporadically occurring failures in galvanized steel systems containing water. Management strategies should consider microbial control as a means for corrosion prevention in these systems.     

Influence of carbon steel grade on the initial attachment of bacteria and microbiologically influenced corrosion

The influence of the composition and microstructure of different carbon steel grades on the initial attachment (≤ 60 min) of Escherichia coli and subsequent longer term (28 days) corrosion was investigated. The initial bacterial attachment increased with time on all grades of carbon steel. However, the rate and magnitude of bacterial attachment varied on the different steel grades and was significantly less on the steels with a higher pearlite phase content. The observed variations in the number of bacterial cells attached across different steel grades were significantly reduced by applying a fixed potential to the steel samples. Longer term immersion studies showed similar levels of biofilm formation on the surface of the different grades of carbon steel. The measured corrosion rates were significantly higher in biotic conditions compared to abiotic conditions and were found to be positively correlated with the pearlite phase content of the different grades of carbon steel coupons.