Salivary protein adsorption onto hydroxyapatite and sds‐mediated elution studied by in situ ellipsometry

Whole unstimulated saliva from two donors was investigated both with respect to adsorption characteristics and SDS‐induced elutability. Salivary protein adsorption onto hydroxyapatite (HA) discs was studied by means of in situ ellipsometry in the concentration range 0.1–20% saliva. The adsorbed amounts on HA were found to be similar to those on silica, but the rates of adsorption were lower. Protein adsorption was virtually unaffected by the presence of Na⁺, whereas Ca²⁺ induced nucleation of calcium phosphate at the surface, the deposition rate being influenced by the pellicle age but not by the presence of saliva in bulk solution. The SDS elutability of adsorbed pellicles was determined on HA as well as on silica surfaces. Desorption from both surfaces was found to occur in the same SDS concentration range, although a residual layer was observed on HA. The slight net positive charge and lower charge density of HA as compared to the strongly negatively charged silica, may, at least partly, account for this observation by causing a reduction in the repulsive force between protein‐surfactant complexes and the surface. Inter‐individual differences, observed in the adsorption as well as elution experiments, are thought to relate to the compositional differences observed by SDS‐PAGE.     

Human palatal saliva: adsorption behaviour and the role of low-molecular weight proteins

In situ ellipsometry was employed to study adsorption from human palatal saliva (HPalS) in terms of dependence on surface wettability and saliva concentration (相似文献   

Salivary mucin MUC5B could be an important component of in vitro pellicles of human saliva: an in situ ellipsometry and atomic force microscopy study

This paper describes a combined investigation of the salivary and MUC5B films structure and topography in conditions similar to those found in the oral cavity in terms of ionic strength, pH, and protein concentration. AFM and ellipsometry were successfully used to give a detailed picture of the film structure and topography both on hydrophilic and on hydrophobic substrata. Regardless of the substrata, the salivary film can be described as having a two sublayer structure in which an inner dense layer is decorated by large aggregates. However, the shape and height of these larger aggregates largely depend on the type of substrata used. Additionally, we show that the adsorption of MUC5B is controlled by the type of substrata and the MUC5B film topography is similar to that of the larger aggregates present in the salivary films, especially on hydrophobic substrates. Therefore, we conclude that MUC5B is a major component in the salivary film when formed on hydrophobic substrates. Furthermore, we studied how resistant the salivary and MUC5B films are against elutability by buffer rinsing and addition of SDS solution. We conclude that the adsorbed proteins contain fractions with varying binding strengths to the two types of surfaces. Specifically, we have shown that the large MUC5B biomacromolecules on the hydrophobic substrates are especially resistant to both elution with buffer solution and SDS. Therefore, these large mucins can be responsible for the increased resistance of HWS films on hydrophobic substrates and can protect the intraoral surfaces against surface-active components present in oral health care products.     

Human palatal saliva: Adsorption behaviour and the role of low-molecular weight proteins

In situ ellipsometry was employed to study adsorption from human palatal saliva (HPalS) in terms of dependence on surface wettability and saliva concentration ( ? 1%). Adsorbed amounts, kinetics, and elutability with buffer and sodium dodecyl sulphate (SDS) were determined. The low-molecular weight protein content of bulk HPalS was also investigated using two-dimensional gel electrophoresis, and this revealed the presence of a large group of proteins < 100 kDa in size. Adsorption to pure (hydrophilic) and methylated (hydrophobized) silica surfaces revealed that the total adsorbed amounts were greater on hydrophobized silica. Below concentrations of 0.5 and 0.25% saliva, adsorption was concentration dependent on hydrophobized and hydrophilic surfaces, respectively. The initial adsorption ( ? 30 min) was faster on hydrophobized surfaces. Addition of SDS removed more material than buffer rinsing on both surfaces. Analysis of the adsorption kinetics indicated that the presence of low-molecular weight proteins plays a role in adsorption from HPalS.     

Lubrication and load-bearing properties of human salivary pellicles adsorbed ex vivo on molecularly smooth substrata

In a series of Surface Force Balance experiments, material from human whole saliva was adsorbed to molecularly smooth mica substrata (to form an 'adsorbed salivary film'). Measurements were taken of normal (load bearing, F (n)) and shear (frictional, F (s)*) forces between two interacting surfaces. One investigation involved a salivary film formed by overnight adsorption from undiluted, centrifuged saliva, with the adsorbed film rinsed with pure water before measurement. Measurements were taken under pure water and 70?mM NaNO(3). In a second investigation, a film was formed from and measured under a solution of 7% filtered saliva in 10?mM NaNO(3). F (n) results for both systems showed purely repulsive layers, with an uncompressed thickness of 35-70?nm for the diluted saliva investigation and, prior to the application of shear, 11?nm for the rinsed system. F (s)* was essentially proportional to F (n) for all systems and independent of shear speed (in the range 100-2000?nm s(-1)), with coefficients of friction μ?～?0.24 and μ?～?0.46 for the unrinsed and rinsed systems, respectively. All properties of the rinsed system remained similar when the pure water measurement environment was changed to 70?mM NaNO(3). For all systems studied, shear gave rise to an approximately threefold increase in the range of normal forces, attributed to the ploughing up of adsorbed material during shear to form debris that stood proud of the adsorbed layer. The results provide a microscopic demonstration of the wear process for a salivary film under shear and may be of particular interest for understanding the implications for in vivo oral lubrication under conditions such as rinsing of the mouth cavity. The work is interpreted in light of earlier studies that showed a structural collapse and increase in friction for an adsorbed salivary film in an environment of low ionic strength.     

Structural and compositional changes in the salivary pellicle induced upon exposure to SDS and STP

Sodium dodecyl sulphate (SDS) and sodium tripolyphosphate (STP) act to remove stained pellicle from dentition and loosen deposits on tooth surfaces that may become cariogenic over time. This study investigated how SDS and STP impact the salivary pellicle adsorbed onto hydroxyapatite and silica sensors using a dual polarisation interferometer and a quartz-crystal microbalance with dissipation. After the pellicle was exposed to SDS and STP the remaining pellicle, although weaker, due to the loss of material, became less dense but with a higher elastic component; suggesting that the viscous component of the pellicle was being removed. This would imply a structural transformation from a soft but dense structured pellicle, to a more diffuse pellicle. In addition, the majority of proteins displaced by both SDS and STP were identified as being acidic in nature; implying that the negatively charged groups of SDS and STP may be responsible for the displacement of the pellicle proteins observed.     

Characterisation of structures in salivary secretion film formation. An experimental study with atomic force microscopy

The purpose of the present study was to characterise the structure dynamics of pure salivary secretions retained on controlled surfaces with different surface energies in the early stage of salivary film formation. Germanium prisms prepared to have either low surface energy or medium surface energy were incubated in fresh secretions of either human parotid saliva (HPS) or human submandibular/sublingual saliva (HSMSLS) for 15, 90, and 180 min. After controlled rinsing with distilled water, the surfaces were air dried and thereafter imaged with atomic force microscopy (AFM). The amount of adsorbed material and the size of the structures detected increased with increased saliva exposure time. The film thicknesses varied from 10 to 150 nm, and both HPS and HSMSLS films contained structures with diameters varying from 40 nm to 2 microm. Some of these were clustered into special formations. The HPS films exhibited a more granular morphology than the HSMSLS films. Furthermore, branched lines were detected on the low surface energy germanium prisms incubated in saliva. The results indicate that exposure time, surface energy, and type of salivary secretion all are factors affecting the adsorption characteristics of salivary films.     

Characterisation of Structures in Salivary Secretion Film Formation. An Experimental Study with Atomic Force Microscopy

The purpose of the present study was to characterise the structure dynamics of pure salivary secretions retained on controlled surfaces with different surface energies in the early stage of salivary film formation. Germanium prisms prepared to have either low surface energy or medium surface energy were incubated in fresh secretions of either human parotid saliva (HPS) or human submandibular/sublingual saliva (HSMSLS) for 15, 90, and 180 min. After controlled rinsing with distilled water, the surfaces were air dried and thereafter imaged with atomic force microscopy (AFM). The amount of adsorbed material and the size of the structures detected increased with increased saliva exposure time. The film thicknesses varied from 10 to 150 nm, and both HPS and HSMSLS films contained structures with diameters varying from 40 nm to 2 μm. Some of these were clustered into special formations. The HPS films exhibited a more granular morphology than the HSMSLS films. Furthermore, branched lines were detected on the low surface energy germanium prisms incubated in saliva. The results indicate that exposure time, surface energy, and type of salivary secretion all are factors affecting the adsorption characteristics of salivary films.     

Lubrication and load-bearing properties of human salivary pellicles adsorbed ex vivo on molecularly smooth substrata

In a series of Surface Force Balance experiments, material from human whole saliva was adsorbed to molecularly smooth mica substrata (to form an ‘adsorbed salivary film’). Measurements were taken of normal (load bearing, F _n) and shear (frictional, F _s*) forces between two interacting surfaces. One investigation involved a salivary film formed by overnight adsorption from undiluted, centrifuged saliva, with the adsorbed film rinsed with pure water before measurement. Measurements were taken under pure water and 70 mM NaNO₃. In a second investigation, a film was formed from and measured under a solution of 7% filtered saliva in 10 mM NaNO₃. F _n results for both systems showed purely repulsive layers, with an uncompressed thickness of 35–70 nm for the diluted saliva investigation and, prior to the application of shear, 11 nm for the rinsed system. F _s* was essentially proportional to F _n for all systems and independent of shear speed (in the range 100–2000 nm s^?1), with coefficients of friction  μ ～ 0.24 and μ ～ 0.46 for the unrinsed and rinsed systems, respectively. All properties of the rinsed system remained similar when the pure water measurement environment was changed to 70 mM NaNO₃. For all systems studied, shear gave rise to an approximately threefold increase in the range of normal forces, attributed to the ploughing up of adsorbed material during shear to form debris that stood proud of the adsorbed layer. The results provide a microscopic demonstration of the wear process for a salivary film under shear and may be of particular interest for understanding the implications for in vivo oral lubrication under conditions such as rinsing of the mouth cavity. The work is interpreted in light of earlier studies that showed a structural collapse and increase in friction for an adsorbed salivary film in an environment of low ionic strength.     

An in vitro study of initial adsorption from human parotid and submandibular/sublingual resting saliva at solid/liquid interfaces

The influence of saliva concentration, saliva total protein content and the wetting characteristics of exposed solids on in vitro film formation was studied by the technique of in situ ellipsometry. The rates and plateau values of adsorption (45 min) at solid/liquid interfaces (hydrophilic silica and hydrophobic methylated silica surfaces) were determinated for human parotid (HPS) and submandibular/sublingual (HSMSLS) resting saliva solutions (0.1 and 1.0%, (v/v), saliva in phosphate buffered saline). Adsorption rates were related to a model assuming mass transport through an unstirred layer adjacent to the surface. The results showed that the adsorption was rapid, concentration dependent and higher on hydrophobic than on hydrophilic surfaces. Analysis of the influence of protein concentration on the adsorbed amounts demonstrated an interaction between protein concentration and the two surfaces for HPS and HSMSLS, respectively. This may indicate differences in binding mode. Inter‐individual differences were found not to be significant at the 1% level of probability. Comparison of the observed adsorption and calculated diffusion rates suggest that on hydrophilic surfaces initial adsorption of proteins diffusing at rates corresponding to those of statherin and aPRPs takes place, whereas on hydrophobic surfaces lower molecular mass compounds appear to be involved.     

Human saliva forms a complex film structure on alumina surfaces

Films formed from saliva on surfaces are important for the maintenance of oral health and integrity by protection against chemical and/or biological agents. The aim of the present study was to investigate adsorbed amounts, thickness, and structure of films formed from human whole saliva on alumina surfaces by means of in situ ellipsometry, neutron reflectivity, and atomic force microscopy. Alumina (Al2O3, synthetic sapphire) is a relevant and interesting substrate for saliva adsorption studies as it has an isoelectric point close to that of tooth enamel. The results showed that saliva adsorbs rapidly on alumina. The film could be modeled in two layers: an inner and dense thin region that forms a uniform layer and an outer, more diffuse and thicker region that protrudes toward the bulk of the solution. The film morphology described a uniformly covering dense layer and a second outer layer containing polydisperse adsorbed macromolecules or aggregates.     

Adsorption of avidin on microfabricated surfaces for protein biochip applications

The adsorption of the protein avidin from hen egg white on patterns of silicon dioxide and platinum surfaces on a microchip and the use of fluorescent microscopy to detect binding of biotin are described. A silicon dioxide microchip was formed using plasma-enhanced chemical vapor deposition while platinum was deposited using radiofrequency sputtering. After cleaning using a plasma arc, the chips were placed into solutions containing avidin or bovine serum albumin. The avidin was adsorbed onto the microchips from phosphate-buffered saline (PBS) or from PBS to which ammonium sulfate had been added. Avidin was also adsorbed onto bovine serum albumin (BSA)-coated surfaces of oxide and platinum. Fluorescence microscopy was used to confirm adsorption of labeled protein, or the binding of fluorescently labeled biotin onto previously adsorbed, unlabeled avidin. When labeled biotin in PBS was presented to avidin adsorbed onto a BSA-coated microchip, the fluorescence signal was significantly higher than for avidin adsorbed onto the biochip alone. The results show that a simple, low-cost adsorption process can deposit active protein onto a chip in an approach that has potential application in the development of protein biochips for the detection of biological species.     

The conditioning role of saliva in streptococcal attachment to hydroxyapatite surfaces

The solution properties of saliva and its role in conditioning both the substrate and the bacterial surface have been investigated with regard to the attachment of oral streptococci to hydroxyapatite surfaces. Saliva from eight subjects was used and the attachment of three organisms, Streptococcus mutans strains FA-1 (serotype b) and KPSK2 (serotype c) and S. sanguis T175-1, was studied. An adsorbed salivary layer on a hydroxyapatite surface substantially reduced the affinity of the organisms for the surface. Adsorbed saliva on the bacterial surfaces, however, tended to increase the organisms' affinity for saliva-coated apatite. The source of saliva was important in determining the extent of inhibition of attachment. The data indicated that the negatively charged and hydrophilic nature of salivary conditioning films was important in controlling bacterial adsorption to hydroxyapatite. The results also suggested that hydrophobic salivas could promote binding of the more hydrophobic bacteria known to be early colonizers of the teeth.     

Effect of Air Plasma Processing on the Adsorption Behaviour of Bovine Serum Albumin on Spin-Coated PMMA Surfaces

This paper reports the adsorption of Bovine Serum Albumin （BSA） onto Dielectric Barrier Discharge （DBD） processed Poly（methyl methacrylate） （PMMA） surfaces by a Quartz Crystal Microbalance with Dissipation monitoring （QCM-D） technique. The purpose is to study the influence of DBD processing on the nature and scale of BSA adsorption on PMMA surface in vitro. It was observed that DBD processing improves the surface wettability of PMMA film, a fact attributable to the changes in surface chemistry and topography. Exposure of the PMMA to Phosphate Buffed Saline （PBS） solution in the QCM-D system resulted in surface adsorption which reaches an equilibrium after about 30 minutes for pristine PMMA, and 90 minutes for processed PMMA surface. Subsequent injection of BSA in PBS indicated that the protein is immediately adsorbed onto the PMMA surface. It was revealed that adsorption behaviour of BSA on pristine PMMA differs from that on processed PMMA surface. A slower adsorption kinetics was observed for pristine PMMA surface, whilst a quick adsorption kinetics for processed PMMA. Moreover, the dissipation shift of protein adsorption suggested that BSA forms a more rigid structure on pristine PMMA surface that on processed surface. These data suggest that changes in wettability and attendant chemical properties and surface texture of the PMMA surface may play a significant role in BSA adsorption process.     

Adsorption of glycinin and β-conglycinin on silica and cellulose: surface interactions as a function of denaturation, pH, and electrolytes

Soybean proteins have found uses in different nonfood applications due to their interesting properties. We report on the kinetics and extent of adsorption on silica and cellulose surfaces of glycinin and β-conglycinin, the main proteins present in soy. Quartz crystal microgravimetry (QCM) experiments indicate that soy protein adsorption is strongly affected by changes in the physicochemical environment. The affinity of glycinin and the mass adsorbed on silica and cellulose increases (by ca. 13 and 89%, respectively) with solution ionic strength (as it increases from 0 to 100 mM NaCl) due to screening of electrostatic interactions. In contrast, β-conglycinin adsorbs on the same substrates to a lower extent and the addition of electrolyte reduces adsorption (by 25 and 57%, respectively). The addition of 10 mM 2-mercaptoethanol, a denaturing agent, reduces the adsorption of both proteins with a significant effect for glycinin. This observation is explained by the cleavage of disulfide bonds which allows unfolding of the molecules and promotes dissociation into subunits that favors more compact adsorbed layer structures. In addition, adsorption of glycinin onto cellulose decreases with lowering the pH from neutral to pH 3 due to dissociation of the macromolecules, resulting in flatter adsorbed layers. The respective adsorption isotherms fit a Langmuir model and QCM shifts in energy dissipation and frequency reveal multiple-step kinetic processes indicative of changes in adlayer structure.     

Plasmid DNA adsorption on silica: kinetics and conformational changes in monovalent and divalent salts

A quartz crystal microbalance with dissipation (QCM-D) is used to determine the adsorption rate of a supercoiled plasmid DNA onto a quartz surface and the structure of the resulting adsorbed DNA layer. To better understand the DNA adsorption mechanisms and the adsorbed layer physicochemical properties, the QCM-D data are complemented by dynamic light scattering measurements of diffusion coefficients of the DNA molecules as a function of solution ionic composition. The data from simultaneous monitoring of variations in frequency and dissipation energy with the QCM-D suggest that the adsorbed DNA layer is more rigid in the presence of divalent (calcium) cations compared to monovalent (sodium) cations. Adsorption rates are significantly higher in the presence of calcium, attaining a transport-limited rate at about 1 mM Ca2+. Results further suggest that in low ionic strength solutions containing 1 mM Ca2+ and in moderately high ionic strength solutions containing 300 mM NaCl, plasmid DNA adsorption to negatively charged mineral surfaces is irreversible.     

Adsorption behavior and adhesive properties of biopolyelectrolyte multilayers formed from cationic and anionic starch

Cationic starch (D.S. 0.065) and anionic starch (D.S. 0.037) were used to form biopolyelectrolyte multilayers. The influence of the solution concentration of NaCl on the adsorption of starch onto silicon oxide substrates and on the formation of multilayers was investigated using stagnation point adsorption reflectometry (SPAR) and quartz crystal microbalance with dissipation (QCM-D). The wet adhesive properties of the starch multilayers were examined by measuring pull-off forces with the AFM colloidal probe technique. It was shown that polyelectrolyte multilayers (PEM) can be successfully constructed from cationic starch and anionic starch at electrolyte concentrations of 1 mM NaCl and 10 mM NaCl. The water content of the PEMs was approximately 80% at both electrolyte concentrations. However, the thickness of the PEMs formed at 10 mM NaCl was approximately twice the thickness formed at 1 mM NaCl. The viscoelastic properties of the starch PEMs, modeled as Voigt elements, were dependent on the polyelectrolyte that was adsorbed in the outermost layer. The PEMs appeared to be more rigid when capped by anionic starch than when capped by cationic starch. The wet adhesive pull-off forces increased with layer number and were also dependent on the polyelectrolyte adsorbed in the outermost layer. Thus, starch PEM treatment has a large potential for increasing the adhesive interaction between solid substrates to levels higher than can be reached by a single layer of cationic starch.     

Formation of polysaccharide gel layers in the presence of Ca2+ and K+ ions: measurements and mechanisms

Understanding the adsorption properties of polysaccharides in terms of substrate affinity, kinetics, and layer structure is of paramount importance in numerous industrial and natural systems. The structural growth of the layers of two model polysaccharides--sodium alginate and polygalacturonic acid (PGA)--was characterized by quartz crystal microbalance with dissipation and atomic force microscopy. Monitoring the variations in frequency and dissipation energy provides insights into both the average adsorbed mass and the viscoelastic properties of the adsorbed layer of polyelectrolytes along with the associated ions and water molecules. Both polysaccharides had similar adsorption patterns with increasing ionic strengths and showed significant complexation of calcium ions. In the presence of calcium, the alginate gel layer exhibited significant swelling with an increasing concentration of monovalent salt that the PGA gel layer did not manifest. Basing our discussion on the "egg-box model", we interpreted these different swelling behaviors as resulting from differences in the complexation modes of the two polysaccharides. The dimerization of the polymers by cross-linking and the weaker dimer-dimer associations play major roles in the sensitivity of the polysaccharide gel matrix to high salt concentration environments.     

On the Adsorption of Human Acidic Proline-rich Proteins (PRP-1 and PRP-3) and Statherin at Solid/liquid Interfaces

The objective of the present study was to investigate the adsorption of PRP-1, PRP-3 and statherin to solid surfaces in terms of dependence on concentration, the presence of electrolyte and surface wettability. Time resolved in situ ellipsometry was used to determine the adsorbed amounts and adsorption rates of pure PRP-1, PRP-3 and statherin onto pure (hydrophilic) and methylated (hydrophobized) silica surfaces. The initial film build-up was fast and plateaus were reached within 10 min at all concentrations for both types of surfaces and all proteins. The observed adsorption and calculated diffusion rates of PRP-1, PRP-3 and statherin, respectively, indicated that the initial adsorption was mass transport controlled at low concentrations. At hydrophobic surfaces, isotherm shapes and adsorbed amounts were similar for PRP-1 and PRP-3, while statherin adsorbed to a higher extent. At hydrophilic surfaces only PRP-1 adsorbed substantially, while for PRP-3 and statherin adsorbed amounts were low. The presence of Ca 2+ ions in the phosphate buffer solution increased the adsorption of statherin and PRP-3 on hydrophobic surfaces, while PRP-1 was unaffected. On hydrophilic surfaces, all three proteins adsorbed in higher amounts in NaCl, compared to CaCl 2 at similar ionic strength. It is concluded that acidic PRPs (PRP-1 and PRP-3) and statherin readily form films on a variety of materials and solution conditions, showing that their functions may be fulfilled under a wide range of conditions.     

The density and refractive index of adsorbing protein layers

The structure of the adsorbing layers of native and denatured proteins (fibrinogen, gamma-immunoglobulin, albumin, and lysozyme) was studied on hydrophilic TiO(2) and hydrophobic Teflon-AF surfaces using the quartz crystal microbalance with dissipation and optical waveguide lightmode spectroscopy techniques. The density and the refractive index of the adsorbing protein layers could be determined from the complementary information provided by the two in situ instruments. The observed density and refractive index changes during the protein-adsorption process indicated the presence of conformational changes (e.g., partial unfolding) in general, especially upon contact with the hydrophobic surface. The structure of the formed layers was found to depend on the size of the proteins and on the experimental conditions. On the TiO(2) surface smaller proteins formed a denser layer than larger ones and the layer of unfolded proteins was less dense than that adsorbed from the native conformation. The hydrophobic surface induced denaturation and resulted in the formation of thin compact protein films of albumin and lysozyme. A linear correlation was found between the quartz crystal microbalance measured dissipation factor and the total water content of the layer, suggesting the existence of a dissipative process that is related to the solvent molecules present inside the adsorbed protein layer. Our measurements indicated that water and solvent molecules not only influence the 3D structure of proteins in solution but also play a crucial role in their adsorption onto surfaces.