首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 739 毫秒
1.
Abstract

Biofouling control in reverse osmosis membranes (ROMs) is challenging due to the high cost of treatments, and reduction in the life of ROMs. This study characterizes the biofouling in the ROMs from a desalination plant and reports its effective removal using the supernatant obtained from Alteromonas sp. strain Ni1-LEM. The characterization of the bacterial community revealed that the most abundant taxa in ROMs were the genera Fulvivirga and Pseudoalteromonas, and unclassified species of the families Flavobacteriaceae and Sphingomonadaceae. This bacterial community significantly decreased upon treatment with the supernatant from Alteromonas sp. Ni1-LEM, resulting in the prevalence of the genus Pseudoalteromonas. Furthermore, this bacterial supernatant significantly inhibited cell adhesion of seven benthic microalgae isolated from ROMs as well as promoting cell detachment of the existing microbial biofilms. The study showed that the extracellular supernatant modified the conformation of extracellular polymeric substances (EPS) in the biofouling of ROMs without any biocidal effects.  相似文献   

2.
Biofouling is one of the most important problems associated with heat exchangers, leading to a loss of thermal performance in their cycle. To maintain them in optimum working condition, biofouling must be kept under control and, to do so, instrumentation is required for its monitoring. The development of the biofouling layer can be qualitatively followed, but only during maintenance shutdown periods is it possible to attain a quantitative assessment. The CMDIMB [Combined Monitor for Direct and Indirect Measurement of Biofouling] was conceived as a means of discovering the evolution of the frictional resistance (f) and the heat transfer resistance (R f) of a fluid because these are variables that indirectly define the biofouling deposited in the tubes of a seawater-cooled heat exchanger. They likewise serve to directly indicate its mass and thickness according to the total solid matter adhered over time. The results obtained allowed the values of the variables taken by the CMDIMB to be extrapolated to the heat exchanger that was set up in parallel. The CMDIMB is proposed as a highly useful tool for directly and indirectly monitoring biofouling growth in heat exchangers that do not possess the necessary instrumentation to monitor this phenomenon.  相似文献   

3.
Bacteria of different Gram-types have inherently different outer cell structures, influencing cell surface properties and bacterial attachment. Dynamic biofouling experiments were conducted over four days in a bench-scale forward osmosis (FO) system with Gram-negative Pseudomonas aeruginosa or Gram-positive Anoxybacillus sp. Biofouling resulted in ~10% decline in FO permeate water flux and was found to be significant for Anoxybacillus sp. but not for P. aeruginosa. Additionally, a stronger permeate water flux decline for P. aeruginosa in experiments with a superhydrophilic feed spacer demonstrated that mitigation methods require testing with different bacterial Gram-types. It was found that although permeate water flux decline can be affected by bacterial Gram-type the stable performance under enhanced biofouling conditions highlights the potential of FO for wastewater reclamation.  相似文献   

4.
Lab-scale membrane bioreactors (MBRs) were investigated at 12, 18, and 25?°C to identify the correlation between quorum sensing (QS) and biofouling at different temperatures. The lower the reactor temperature, the more severe the membrane biofouling measured in terms of the transmembrane pressure (TMP) during filtration. More extracellular polymeric substances (EPSs) that cause biofouling were produced at 18?°C than at 25?°C, particularly polysaccharides, closely associated with QS via the production of N-acyl homoserine lactone (AHL). However, at 12?°C, AHL production decreased, but the release of EPSs due to deflocculation increased the soluble EPS concentration. To confirm the temperature effect related to QS, bacteria producing AHL were isolated from MBR sludge and identified as Aeromonas sp., Leclercia sp., and Enterobacter sp. through a 16S rDNA sequencing analysis. Batch assays at 18 and 25?°C showed that there was a positive correlation between QS through AHL and biofilm formation in that temperature range.  相似文献   

5.
Abstract

Data from short-term biofouling assays are frequently used to evaluate the performance of antifouling (AF) coatings. There are a large number of factors, however, that may influence community development. One such factor is colour. The hypothesis was that differences in colour may impact the short-term development of a biofouling community and therefore bias the results. An experiment was designed to investigate the effect of black and white substrata on settlement of fouling organisms in the field. Both Ulva sp. and Spirorbis sp. had significantly higher settlement on black surfaces. This result emphasises the importance of considering colour and other factors when undertaking short-term testing of AF coatings.  相似文献   

6.
Countermeasures to biofouling in simulated ocean thermal energy conversion heat exchangers have been studied in single-pass flow systems, using cold deep and warm surface ocean waters off the island of Hawaii. Manual brushing of the loops after free fouling periods removed most of the biofouling material. However, over a 2-year period a tenacious film formed. Daily free passage of sponge rubber balls through the tubing only removed the loose surface biofouling layer and was inadequate as a countermeasure in both titanium and aluminum alloy tubes. Chlorination at 0.05, 0.07, and 0.10 mg liter-1 for 1 h day-1 lowered biofouling rates. Only at 0.10 mg liter-1 was chlorine adequate over a 1-year period to keep film formation and heat transfer resistance from rising above the maximum tolerated values. Lower chlorination regimens led to the buildup of uneven or patchy films which produced increased flow turbulence. The result was lower heat transfer resistance values which did not correlate with the amount of biofouling. Surfaces which were let foul and then treated with intermittent or continuous chlorination at 0.10 mg of chlorine or less per liter were only partially or unevenly cleaned, although heat transfer measurements did not indicate that fact. It took continuous chlorination at 0.25 mg liter-1 to bring the heat transfer resistance to zero and eliminate the fouling layer. Biofouling in deep cold seawater was much slower than in the warm surface waters. Tubing in one stainless-steel loop had a barely detectable fouling layer after 1 year in flow. With aluminum alloys sufficient corrosion and biofouling material accumulated to require that some fouling coutermeasure be used in long-term operation of an ocean thermal energy conversion plant.  相似文献   

7.
Xiang Shen  Yiping Zhao 《Biofouling》2013,29(8):991-1003
Biofouling of membrane surfaces by the attachment of microorganisms is one of the major obstacles for ensuring the effectiveness of membrane separation processes. This work presents the construction of a zwitterionic PVDF membrane surface with improved resistance to biofouling. An amphiphilic copolymer of poly(vinylidene fluoride)-graft-poly(N,N-dimethylamino-2-ethylmethacrylate) (PVDF-g-PDMAEMA) was first synthesized via radical graft copolymerization and then the flat membrane was cast with immersed phase inversion. The PDMAEMA side chains tended to aggregate on the membrane surface, pore surface and internal pore channel surface, and were converted with 1,3-propane sultone (1,3-PS) to yield a zwitterionic membrane surface. A higher conversion of PDMAEMA chains and distribution of zwitterions were obtained using a longer treatment time. A biofouling assay indicated that incorporation of zwitterions suppressed the adsorption of extracellar polymer substances and the adhesion of Escherichia coli bacterial cells to the membrane surface, endowing the membrane with a high flux recovery and biofouling resistance in the filtration process.  相似文献   

8.
Biofouling is one of the challenges that can strongly affect the finfish farm economy. Although several studies on biofouling in aquaculture have been conducted in the Mediterranean Sea, they focused on specific taxa or were limited to a particular period of sampling. The present study investigated for the first time the development, composition and variation in a biofouling community in a finfish farm with immersion time, season and depth. The results indicate that all these factors influence biofouling succession and recruitment. Moreover, the species that had a crucial role in structuring the community and in the farm cleaning activities were the ascidian Styela plicata and the bivalve Mytilus galloprovincialis. Compared with the literature data, the results highlight the heterogeneity in the composition of the biofouling present in the Mediterranean Sea. Moreover, such knowledge of the biofouling community could provide important information about management efforts and the costs that farmers will face when siting new fish farms.  相似文献   

9.
The desiccation tolerance of biofouling taxa (adults and early life-stages) was determined under both controlled and ‘realistic’ field conditions. Adults of the ascidian Ciona spp. died within 24 h. Mortality in the adult blue mussel Mytilus galloprovincialis occurred within 11 d under controlled conditions, compared with 7 d when held outside. The Pacific oyster Crassostrea gigas was the most desiccation-tolerant taxon tested (up to 34 d under controlled conditions). Biofouling orientated to direct sunlight showed faster mortality rates for all the taxa tested. Mortality in Mytilus juveniles took up to 24 h, compared with 8 h for Ciona, with greater survival at the higher temperature (18.5°C) and humidity (~95% RH) treatment combination. This study demonstrated that desiccation can be an effective mitigation method for a broad range of fouling taxa, especially their early life-stages. Further work is necessary to assess risks from other high-risk species such as algae and cyst forming species.  相似文献   

10.
Biofouling is one of the most important problems associated with heat exchangers, leading to a loss of thermal performance in their cycle. To maintain them in optimum working condition, biofouling must be kept under control and, to do so, instrumentation is required for its monitoring. The development of the biofouling layer can be qualitatively followed, but only during maintenance shutdown periods is it possible to attain a quantitative assessment. The CMDIMB [Combined Monitor for Direct and Indirect Measurement of Biofouling] was conceived as a means of discovering the evolution of the frictional resistance (f) and the heat transfer resistance (R(f)) of a fluid because these are variables that indirectly define the biofouling deposited in the tubes of a seawater-cooled heat exchanger. They likewise serve to directly indicate its mass and thickness according to the total solid matter adhered over time. The results obtained allowed the values of the variables taken by the CMDIMB to be extrapolated to the heat exchanger that was set up in parallel. The CMDIMB is proposed as a highly useful tool for directly and indirectly monitoring biofouling growth in heat exchangers that do not possess the necessary instrumentation to monitor this phenomenon.  相似文献   

11.
Biofouling produces concentrated microbial populations with highly resistive biofilms and is considered to be a serious obstacle for a wide range of membrane technology applications. An antibacterial super-hydrophilic barrier could help to reduce biofouling by preventing direct contact between membranes and bacteria. In this study, an antibacterial super-hydrophilic barrier consisting of a layer of TiO2 nanoparticles (NPs) was developed on polyvinylidene fluoride (PVDF)-based membrane via a facile technique. The results demonstrated that the presence of TiO2 NPs eliminated the first step of biofouling, ie bacterial adhesion to the membrane. In addition, after bacterial deposition onto the membrane during ultrafiltration (UF), the TiO2 NPs significantly retarded bacterial growth and reproduction (the second step of biofouling). During UF, the membrane flux decreased due to bacterial deposition, but 85% of the flux was recovered through physical cleaning using water. This study sheds light on the potential advantages of antibacterial super-hydrophilic membranes for biofouling mitigation.  相似文献   

12.
Using a combination of laboratory and field investigations, this study examined embryo mortality in the southern calamary Sepioteuthis australis as a function of egg mass size, the substrate upon which the mass is attached, the position of the embryo within the mass, and the degree of biofouling. Egg mass size ranged from 2 to 1,241 egg strands, however most masses consisted of 200–299 strands. Small egg masses (<300 strands) were generally attached to soft-sediment vegetation (Amphibolis antarctica, Heterozostera tasmanica, Caulerpa sp.), whereas larger masses (>300 strands) were either securely attached to robust macroalgae holdfasts (Ecklonia sp., Marcocystis pyrifera, Sargassum sp.) or unattached. Rates of embryo mortality were highly variable ranging from 2 to 25%. Both laboratory and field results indicated a positive relationship between egg mass size and embryo mortality. Larger, unattached egg masses contained twice as many dead embryos than those securely attached to a substrate. Mortality rates were significantly affected by the embryos’ relative position within the mass and were highest in embryos located near the attachment point of the egg strand, within the interior of the mass, and in close contact with the substrate. This was attributed to the inability of the embryos to respire adequately and eliminate metabolic wastes. Biofouling did not strongly influence embryo mortality, but colonisation occurred in areas conducive to growth, photosynthesis, and respiration indicating ‘healthy’ regions within the mass.  相似文献   

13.
In situ and in vitro nitrate reductase (NR) activity assays designed for use in the field on Enteromorpha sp., Ulva sp., and Gelidium sp. are described. In optimizing each assay, a variety of compounds and assay conditions were tested for their ability to extract NR and preserve its activity. Enteromorpha sp. had similar levels of in vitro NR activity after exposure to the in situ assay buffer, demonstrating that neither NR induction nor activation likely occurs during the in situ assay. Storing freshly collected Enteromorpha sp. led to a reduction in NR activity over time. However, the use of liquid nitrogen to freeze algal tissue on site and subsequent storage at ?80° C preserved NR activity and allowed for later laboratory use of the optimized in vitro assay. Application of the in situ and in vitro assays to stands of Enteromorpha sp., Ulva sp., and Gelidium sp. in the field consistently found NR activity. In situ NR activity over 9 consecutive days in January demonstrated that Enteromorpha sp. responds to increases in nitrate availability. The influence of light on diel patterns of in vitro NR activity in the field was demonstrated for the first time as well. For the three species tested, these two assays provide a reliable tool for field investigation of the interaction between environmental signals (e.g. nutrient levels) and physiological signals (e.g. tissue metabolite levels) on nitrate reduction.  相似文献   

14.
Augmentative biocontrol, defined as the use of indigenous natural enemies to control pest populations, has not been explored extensively in marine systems. This study tested the potential of the anemone Anthothoe albocincta as a biocontrol agent for biofouling on submerged artificial structures. Biofouling biomass was negatively related to anemone cover. Treatments with high anemone cover (>35%) led to significant changes in biofouling assemblages compared to controls. Taxa that contributed to these changes differed among sites, but included reductions in cover of problematic fouling organisms, such as solitary ascidians and bryozoans. In laboratory trials, A. albocincta substantially prevented the settlement of larvae of the bryozoan Bugula neritina when exposed to three levels of larval dose, suggesting predation as an important biocontrol mechanism, in addition to space pre-emption. This study demonstrated that augmentative biocontrol using anemones has the potential to reduce biofouling on marine artificial structures, although considerable further work is required to refine this tool before its application.  相似文献   

15.
Corrosion and biofouling phenomena of cast iron and brass were evaluated under natural conditions to determine the degradation process of archeological artifacts. Field exposure studies of experimental materials were conducted over 15 months at an offshore position in the sea of Campeche in the Gulf of Mexico. Corrosion was determined by gravimetric measurements. The community structure of the benthic assemblage inhabiting the surfaces of both materials was evaluated. A total of 53 species was identified. The community in both cases was composed of a small number of species. Encrusting, attached and erect life forms were dominant on iron. Attached life forms were dominant on brass. Biofouling produced a decrease in the weight loss measurements of cast iron samples. Biofouling provided a beneficial factor for in situ preservation of iron archeological artifacts in wreck sites.  相似文献   

16.
How ocean acidification affects marine life is a major concern for science and society. However, its impacts on encrusting biofouling communities, that are both the initial colonizers of hard substrata and of great economic importance, are almost unknown. We showed that community composition changed significantly, from 92% spirorbids, 3% ascidians and 4% sponges initially to 47% spirorbids, 23% ascidians and 29% sponges after 100 days in acidified conditions (pH 7.7). In low pH, numbers of the spirorbid Neodexiospira pseudocorrugata were reduced ×5 compared to controls. The two ascidians present behaved differently with Aplidium sp. decreasing ×10 in pH 7.7, whereas Molgula sp. numbers were ×4 higher in low pH than controls. Calcareous sponge (Leucosolenia sp.) numbers increased ×2.5 in pH 7.7 over controls. The diatom and filamentous algal community was also more poorly developed in the low pH treatments compared to controls. Colonization of new surfaces likewise showed large decreases in spirorbid numbers, but numbers of sponges and Molgula sp. increased. Spirorbid losses appeared due to both recruitment failure and loss of existing tubes. Spirorbid tubes are comprised of a loose prismatic fabric of calcite crystals. Loss of tube materials appeared due to changes in the binding matrix and not crystal dissolution, as SEM analyses showed crystal surfaces were not pitted or dissolved in low pH conditions. Biofouling communities face dramatic future changes with reductions in groups with hard exposed exoskeletons and domination by soft‐bodied ascidians and sponges.  相似文献   

17.
Polyclonal antiserum was elicited against a strain of Fusarium oxysporum f.sp. narcissi (GCRI80/26) and a specific and sensitive enzyme-linked immunosorbent assay developed. Antiserum raised to cell wall fractions gave better recognition than that to cytoplasmic fractions. Recognition was equally good in artificially and naturally infected bulbs. Little cross-reactivity in bulb tissue was shown by three other bulb-rotting fungi. Nine isolates of F. oxysporum f.sp. narcissi from a wide geographic area gave similar results in an indirect ELISA of mycelial extracts, although some cross-reactivity was observed with two other Fusarium spp. Four Fusarium spp. and four other fungi showed little cross-reactivity. Ten days after inoculation the pathogen was readily detected in the base plate area of three Narcissus cultivars and points remote from the inoculation site in the most susceptible cultivar. A direct correlation was observed between positive results in the enzyme-linked immunosorbent assay and recovery of the pathogen on selective medium.  相似文献   

18.
There is a wide range of factors affecting bacterial adhesion and biofilm formation. However, in both food processing and medical settings, it is very hard to obtain suitably controlled conditions so that the factors that reduce surface colonisation and biofouling can be studied. The aim of this study was to evaluate the effect of glucose concentration, temperature and stainless steel (SS) surface roughness on biofouling by four common pathogens (Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa and L. monocytogenes). Among the tested variables, the untreated SS surface (3C) was shown to be fouled more than 3D polished, brushed or electropolished SS surfaces. Although an array of parameters influenced biofouling, the most promising control measure was the influence of low temperature (4?°C) that reduced biofouling even in the case of the psychrophilic Listeria monocytogenes. The study findings could significantly contribute to the prevention of SS surface contamination and consequential biofouling by food and healthcare associated pathogens.  相似文献   

19.
Three new dinoflagellate species, Gambierdiscus polynesiensis, sp. nov., Gambierdiscus australes, sp. nov., and Gambierdiscus pacificus, sp. nov., are described from scanning electron micrographs. The morphology of the three new Gambierdiscus species is compared with the type species Gambierdiscus toxicus Adachi et Fukuyo 1979, and two other species: Gambierdiscus belizeanus Faust 1995 and Gambierdiscus yasumotoi Holmes 1998. The plate formula is: Po, 3′, 7", 6C, 8S, 5‴, 1p, 2". Culture extracts of these three new species displayed both ciguatoxin- and maitotoxin-like toxicities. The following morphological characteristics differentiated each species. 1) Cells of G. polynesiensis are 68–85 μm long and 64–75 μm wide, and the cell’s surface is smooth. They are identified by a large triangular apical pore plate (Po), a narrow fish-hook opening surrounded by 38 round pores, and a large, broad posterior intercalary plate (1p) wedged between narrow postcingular plates 2‴ and 4‴. Plate 1p occupies 60% of the width of the hypotheca. 2) Cells of G. australes also have a smooth surface and are 76–93 μm long and 65–85 μm wide in dorsoventral depth. They are identified by the broad ellipsoid apical pore plate (Po) surrounded by 31 round pores and a long and narrow 1p plate wedged between postcingular plates 2‴ and 4‴. Plate 1p occupies 30% of the width of the hypotheca. 3) Cells of G. pacificus are 67–77 μm long and 60–76 μm wide in dorsoventral depth, and its surface is smooth. They are identified by the four-sided apical pore plate (Po) surrounded by 30 round pores. A short narrow 1p plate is wedged between the wide postcingular plates 2‴ and 4‴. Plate 1p occupies 20% of the width of the hypotheca. These three newly described species were also characterized by isozyme electrophoresis and DNA sequencing of the D8–D10 region of their large subunit (LSU) rRNA genes. The consistency between species designations based on SEM microscopy and classification inferred from biochemical and genetic heterogeneities was examined among seven isolates of Gambierdiscus. Their classification into four morphospecies was not consistent with groupings inferred from isozyme patterns. Three molecular types could be distinguished based on the comparison of their LSU rDNA sequences. Although G. toxicus TUR was found to be more closely related to G. pacificus, sp. nov. than to other G. toxicus strains, the molecular classification was able to discriminate G. polynesiensis, sp. nov. and G. australes, sp. nov. from G. toxicus. These results suggest the usefulness of the D8–D10 portion of the Gambierdiscus LSU rDNA as a valuable taxonomic marker.  相似文献   

20.
Developmental plasticity is often correlated with diversity and has been proposed as a facilitator of phenotypic novelty. Yet how a dimorphism arises or how additional morphs are added is not understood, and few systems provide experimental insight into the evolution of polyphenisms. Because plasticity correlates with structural diversity in Pristionchus nematodes, studies in this group can test the role of plasticity in facilitating novelty. Here, we describe three new species, Pristionchus fukushimae sp. nov. , Pristionchus hoplostomus sp. nov. , and the hermaphroditic Pristionchus triformis sp. nov. , which are characterized by a novel polymorphism in their mouthparts. In addition to showing the canonical mouth dimorphism of diplogastrid nematodes, comprising a stenostomatous (‘narrow‐mouthed’) and a eurystomatous (‘wide‐mouthed’) form, the new species exhibit forms with six, 12, or intermediate numbers of cheilostomatal plates. Correlated with this polymorphism is another trait that varies among species: whereas divisions between plates are complete in P. triformis sp. nov. , which is biased towards a novel ‘megastomatous’ form comprising 12 complete plates, the homologous divisions in the other new species are partial and of variable length. In a reconstruction of character evolution, a phylogeny inferred from 26 ribosomal protein genes and a partial small subunit rRNA gene supported the megastomatous form of P. triformis sp. nov. as the derived end of a series of split‐plate forms. Although split‐plate forms were normally only observed in eurystomatous nematodes, a single 12‐plated stenostomatous individual of P. hoplostomus sp. nov. was also observed, suggesting independence of the two types of mouth plasticity. By introducing these new species to the Pristionchus model system, this study provides further insight into the evolution of polymorphisms and their evolutionary intermediates. © 2013 The Linnean Society of London  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号