Combined Use of Crystalline Sodium Salt and Polymeric Precipitation Inhibitors to Improve Pharmacokinetic Profile of Ibuprofen through Supersaturation

To maximize the pharmacological effect of a pain reliever such as ibuprofen, early onset of action is critical. Unfortunately, the acidic nature of ibuprofen minimizes the amount of drug that can be solubilized under gastric conditions and would be available for immediate absorption upon entry into the intestine. Although the sodium salt of ibuprofen has higher solubility, rapid conversion from the salt to the poorly soluble free acid phase occurs under gastric conditions. Therefore, the combination of the highly soluble sodium salt form of ibuprofen with polymers was evaluated as an approach to prolong supersaturation of ibuprofen during the disproportionation of the salt. Binary combinations of ibuprofen sodium with polymers resulted in the identification of several formulations that demonstrated high degrees and extended durations of supersaturation during in vitro dissolution experiments. These formulations included HPMC, polyvinyl pyrrolidone-vinyl acetate copolymer (PVP-VA64), methylcellulose (MC), and hydroxypropyl cellulose (HPC). The in vitro supersaturation observed with these ibuprofen-polymer formulations translated to an increase in C_max and an earlier T_max for the PVP-VA64, MC, and HPC formulations relative to ibuprofen only controls when administered orally to rats under fasted conditions. Based on these observations, combining ibuprofen sodium with polymers such as PVP-VA64, MC, or HPC is a viable formulation approach to prolong supersaturation in the stomach and enable an optimized pharmacokinetic profile in vivo where rapid onset of action is desired.     

Structure and properties of carboxymethyl cellulose/soy protein isolate blend edible films crosslinked by Maillard reactions

Edible films based on carboxymethyl cellulose (CMC) and soy protein isolate (SPI), compatibilized by glycerol, were prepared by solution casting. The effects of CMC content on blend structure, thermal stability, water solubility and water sorption, and mechanical properties were systematically investigated. Fourier transform infrared (FTIR) spectra showed that Maillard reactions occurred between CMC and SPI, and X-ray diffraction (XRD) scans indicated that the Maillard reactions greatly reduced the crystallinity of SPI. According to differential scanning calorimetry (DSC) analysis, CMC/SPI blends had a single glass transition temperature (T_g) between 75 and 100 °C, indicating that CMC and SPI form one phase blends. Increasing the CMC content improved the mechanical properties and reduced the water sensitivity of blend films. The results indicate that the structure and properties of SPI edible films were modified and improved by blending with CMC.     

Homogenous reactions of cellulose from different natural sources

Two different homogenous reactions on bacterial cellulose (BC), kenaf fiber (KF) and microcrystalline cellulose (MC) were performed to monitor their chemical reactivity. The first reaction was selective oxidation of the primary hydroxyl group with sodium chlorite in the presence of catalytic amount of sodium chloride. While, the second was the formation of triester hypoiodous cellulose using potassium iodate and potassium iodide. The chemical structures of these derivatives were investigated using FT-IR and solid state ¹³C NMR spectroscopies. The BC fibrils required the shortest time among these cellulose samples for both reactions, whereas the viscosity values of BC after iodination and oxidation have the best values compared to KF and MC. FT-IR results show the absence of the hydroxy group of BC and a weak absorption band in both KF and MC. On the other hand, the crystallinity index (CI) of BC is higher than those of both KF and MC. FT-IR spectra of the oxidized different cellulose samples, confirmed the presence of a strong absorption band at around 1590 cm⁻¹ that attributed to vibration band of carbonyl group of carboxylic moiety. Moreover, in the ¹³C NMR spectrum of oxidized cellulose, the lack of signal at 62 ppm and the appearance of signal at 171 ppm indicated that the primary alcohol group is completely oxidized to carboxylic acid. These results showed that BC had a higher reactivity than other samples due to its great purity and low degree of polymerization.     

Three Native Cellulose-Depolymerizing Endoglucanases from Solid-Substrate Cultures of the Brown Rot Fungus Meruliporia (Serpula) incrassata

Three extracellular cellulose-depolymerizing enzymes from cotton undergoing decay by the brown rot fungus Meruliporia (Serpula) incrassata were isolated by anion-exchange and hydrophobic interaction chromatographies. Depolymerization was detected by analyzing the changes in the molecular size distribution of cotton cellulose by high-performance size-exclusion chromatography. The average degree of polymerization (DP; number of glucosyl residues per cellulose chain) was calculated from the size-exclusion chromatography data. The very acidic purified endoglucanases, Cel 25, Cel 49, and Cel 57, were glycosylated and had molecular weights of 25,200, 48,500, and 57,100, respectively. Two, Cel 25 and Cel 49, depolymerized cotton cellulose and were also very active on carboxymethyl cellulose (CMC). Cel 57, by contrast, significantly depolymerized cotton cellulose but did not release reducing sugars from CMC and only very slightly reduced the viscosity of CMC solutions. Molecular size distributions of cotton cellulose attacked by the three endoglucanases revealed single major peaks that shifted to lower DP positions. A second smaller peak (DP, 10 to 20) was also observed in the size-exclusion chromatograms of cotton attacked by Cel 49 and Cel 57. Under the reaction conditions used, Cel 25, the most active of the cellulases, reduced the weight average DP from 3,438 to 315, solubilizing approximately 20% of the cellulose. The weight average DP values of cotton attacked under the same conditions by Cel 49 and Cel 57 were 814 and 534; weight losses were 9 and 11% respectively.     

Determination of solubility parameters for poly(3-hydroxyalkanoates).

The three dimensional solubility parameters defined by Hansen are based on dispersion forces between structural units, interaction between polar groups and hydrogen bonding. For polar polymers such as poly(3-hydroxyalkanoates), P(3HA), this approach was used to obtain the three coordinates of a solubility parameter in terms of: a dispersion part, a polar part and a hydrogen bonding part. Thirty-eight different solvents for poly(3-hydroxybutyrate), PHB, which are mentioned in the literature are examined by this method and the theoretical predictions are compared with the experimental reports. Another overall comparison between PHA polymers provides their Hansen and Hildebrand parameters for side chain lengths up to C13. In this series a linear progression in calculated solubility parameters with side chain length was found. An Appendix provides information and data on calculation of the solubility parameters. While the solubility information is limited and only covers homopolymers, it should help to highlight some of the contradictions regarding PHB solubility. This semi-empirical approach is only valid for amorphous polymers hence crystallinity effects, which are important with PHB, as well as molecular weight effects still require analysis.     

Ultrasound mediated enzymatic hydrolysis of cellulose and carboxymethyl cellulose

A recombinant Trichoderma reesei cellulase was used for the ultrasound‐mediated hydrolysis of soluble carboxymethyl cellulose (CMC) and insoluble cellulose of various particle sizes. The hydrolysis was carried out at low intensity sonication (2.4–11.8 W cm^?2 sonication power at the tip of the sonotrode) using 10, 20, and 40% duty cycles. [A duty cycle of 10%, for example, was obtained by sonicating for 1 s followed by a rest period (no sonication) of 9 s.] The reaction pH and temperature were always 4.8 and 50°C, respectively. In all cases, sonication enhanced the rate of hydrolysis relative to nonsonicated controls. The hydrolysis of CMC was characterized by Michaelis‐Menten kinetics. The Michaelis‐Menten parameter of the maximum reaction rate V_max was enhanced by sonication relative to controls, but the value of the saturation constant K_m was reduced. The optimal sonication conditions were found to be a 10% duty cycle and a power intensity of 11.8 W cm^?2. Under these conditions, the maximum rate of hydrolysis of soluble CMC was nearly double relative to control. In the hydrolysis of cellulose, an increasing particle size reduced the rate of hydrolysis. At any fixed particle size, sonication at a 10% duty cycle and 11.8 W cm^?2 power intensity improved the rate of hydrolysis relative to control. Under the above mentioned optimal sonication conditions, the enzyme lost about 20% of its initial activity in 20 min. Sonication was useful in accelerating the enzyme catalyzed saccharification of cellulose. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:1448–1457, 2013     

Investigation of the state and dynamics of water in hydrogels of cellulose ethers by 1H NMR spectroscopy

The aim of this work was to study the effect of the type of substituent of the cellulose ethers and the molecular mass on the state and dynamics of water in the respective hydrogels to specify the quantity of adsorbed water on the polymers or, more explicitly, to calculate the average number of water molecules bound to a polymer repeating unit (PRU).¹H NMR relaxation experiments were performed on equilibrated systems of cellulose ether polymers (HEC, HPC, HPMC K4M, and HPMC K100M) with water. In particular, the water proton spinlattice (T ₁) and spin-spin (T ₂) relaxation times were measured in these systems at room temperature. The observed proton NMRT ₁ andT ₂ of water in hydrogels at different cellulose ether concentrations at room temperature were shown to decrease with increasing polymer concentration. The relaxation rate 1/T ₁ is sensitive to the type of polymer substituent but insensitive to the polymer molecular mass. The rate 1/T ₂ appears much less influenced by the polymer substitution. The procedure developed for calculating the amount of water bound per PRU, based on the analysis of theT ₁ andT ₂ data, shows that this amount is the largest for HPC followed by HEC, HP MC K4M, and HPMC K100M. The results correlate well with the degree of hydrophilic substitution of the polymer chains. This NMR analysis deals with a single molecular layer of adsorbed water for the investigated cellulose ether polymers at all concentrations, while the rest of the water in the hydrogel is bulk-like. Therefore, the mesh size of polymer network in the view of a single molecular layer is not effectively changed.     

Syntheses of tricyclic pyrones and pyridinones and protection of Aβ-peptide induced MC65 neuronal cell death

The SβC gene is conditionally expressed a 99-residue carboxy terminal fragment, C99, of amyloid precursor protein in MC65 cells and causes cell death. Consequently, MC65 cell line was used to identify inhibitors of toxicity related to intracellular amyloid β (Aβ) oligomers. Compounds that reduce the level of Aβ peptides, prevent Aβ aggregation, or eliminate existing Aβ aggregates may be used in the treatment of Alzheimer’s disease (AD). Previously, we found that a tricyclic pyrone (TP) molecule, compound 1, prevents MC65 cell death and inhibits Aβ aggregation. Hence various TPs containing heterocycle at C7 side chain and a nitrogen at position 2 or 5 were synthesized and their MC65 cell protective activities evaluated. TPs containing N3′-adenine moiety such as compounds 1 and 11 are most active with EC₅₀ values of 0.31 and 0.35 μM, respectively. EC₅₀ values of tricyclic N5-analog, pyranoisoquinolinone 13, and N2-analog, pyranopyridinone 20, are 2.49 and 1.25 μM, respectively, despite the lack of adenine moiety. Further investigation of tricyclic N2- and N5-analogs is warranted.     

Purification of two immunologically distinct endoglucanases without affinity for microcrystalline cellulose from Cellulomonas sp. ATCC 21399

Two endoglucanases (endoglucanase B and endoglucanase C) without affinity for cellulose were purified from the culture broth of Cellulomonas sp. ATCC 21399 using gelfiltration and ion exchange chromatography. Fused rocket immunoelectrophoresis was used to select the fractions with the highest content of endoglucanase and lowest content of contaminating proteins. The endoglucanases were purified to immunological homogeneity. In addition both endoglucanases were homogeneous when analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (molecular weights of endoglucanase B and endoglucanase C were 67000 and 25000, respectively). Endoglucanase B was homogeneous when studied by isoelectric focusing showing one protein band at pl 4.3. Both endoglucanases lacked activity against microcrystalline cellulose (Avicel) and showed similar endo action on carboxymethylcellulose (CMC). Endoglucanase B had a high specific activity against CMC, H(3)PO(4)-swollen Avicel and xylan, but showed no activity against galactomannan. In contrast, endoglucanase C showed activity against both CMC, xylan, and galactomannan all being polysaccharide substrates linked with beta-1-4-D-glucoside bonds. The specific activity of endoglucanase C against H(3)PO(4)-swollen Avicel was low.     

Hydrogen bond formation in regioselectively functionalized 3-mono-O-methyl cellulose

The hydrogen bond systems of cellulose and its derivatives are one of the most important factors regarding their physical- and chemical properties such as solubility, crystallinity, gel formation, and resistance to enzymatic degradation. In this paper, it was attempted to clarify the intra- and intermolecular hydrogen bond formation in regioselectively functionalized 3-mono-O-methyl cellulose (3MC). First, the 3MC was synthesized and the cast film thereof was characterized in comparison to 2,3-di-O-methyl cellulose, 6-mono-O-methyl cellulose, and 2,3,6-tri-O-methyl cellulose by means of wide angle X-ray diffraction (WAXD) and (13)C cross polarization/magic angle spinning NMR spectroscopy. Second, the hydrogen bonds in the 3MC film were analyzed by means of FTIR spectroscopy in combination with a curve fitting method. After deconvolution, the resulting two main bands (Fig. 3) indicated that instead of intramolecular hydrogen bonds between position OH-3 and O-5 another intramolecular hydrogen bond between OH-2 and OH-6 may exist. The large deconvoluted band at 3340cm(-1) referred to strong interchain hydrogen bonds involving the hydroxyl groups at C-6. The crystallinity of 54% calculated from the WAXD supports also the dependency of the usually observed crystallization in cellulose of the hydroxyl groups at C-6 to engage in interchain hydrogen bonding.     

Adhesion of colloidal polyelectrolyte complexes to wet cellulose

The adhesion of wet regenerated cellulose to colloidal complexes formed between carboxymethyl cellulose (CMC) and polyvinylamine (PVAm) was evaluated by measuring the force to delaminate pairs of regenerated cellulose membranes bound together with polyelectrolyte complex. The most important parameter was the surface composition of the colloidal complex particles. High delamination forces corresponded to using complexes coated with excess PVAm whereas low adhesion was observed for both CMC coated complexes and complexes in which the PVAm was replaced with polymer bearing quaternary amine groups. Adhesion with complexes was highest at pH 4 and rather insensitive to pH from 6 to 9. Finally, mild TEMPO/NaBr/NaClO oxidation of the cellulose gave much stronger adhesion when PVAm was in excess but not with the CMC rich complexes.     

Design,Characterization, and Evaluation of Meloxicam Gel Prepared by Suspension and Solution Polymerization Using Solubility Parameter as the Basis for Development

Meloxicam gel was designed based on the matching of the solubility parameter (δ) of the drug with that of the polymer and subsequently with skin for improved dermal delivery of meloxicam. The δ of meloxicam (11.48 (cal/cm³)^0.5) determined by solubility measurement was matched statistically to the solubility parameter of monomers, n-vinyl-2-pyrrolidone, polyvinyl alcohol (PVA), hydroxyl ethyl methacrylate, ethylene glycol methacrylate (EGMA) determined by intrinsic viscosity measurement. Consequently gels were formulated by polymerization in selected solvent blend of water/ethyl acetate (20:80) in which the drug showed maximum solubility. Thus, F1–F16 formulations designed were evaluated for physicochemical properties, textural analysis, and in vitro drug release. On the basis of optimum characteristics, F2 (PVA, δ = 16.96 (cal/cm³)^0.5) and F8 (EGMA, δ = 18.35 (cal/cm³)^0.5) formulated by suspension polymerization were selected and subjected to skin irritation and topical anti-inflammatory studies. The formulation F8 demonstrated significant (p < 0.05) of anti-inflammatory activity in comparison to marketed piroxicam gel and was free from irritation.     

Degradation of cellulose by the major endoglucanase produced from the brown-rot fungus Fomitopsis pinicola

An endoglucanase that is able to degrade both crystalline and amorphous cellulose was purified from the culture filtrates of the brown-rot fungus Fomitopsis pinicola grown on cellulose. An apparent molecular weight of the purified enzyme was approximately 32 kDa by SDS-PAGE analysis. The enzyme was purified 11-fold with a specific activity of 944 U/mg protein against CMC. The partial amino acid sequences of the purified endoglucanase had high homology with endo-beta-1,4-glucanase of glycosyl hydrolase family 5 from other fungi. The K(m) and K(cat)values for CMC were 12 mg CMC/ml and 670/s, respectively. The purified EG hydrolyzed both cellotetraose (G4) and cellopentaose (G5), but did not degrade either cellobiose (G2) or cellotriose (G3).     

A Thermostable Xylanase from a Thermophilic Acidophilic Bacillus sp.

Bacillus sp. 11-IS, a strain of thermophilic acidophilic bacteria, produced an extracellular xylanase during growth on xylan. The enzyme purified from the culture supernatant solution was homogeneous on disc-gel electrophoresis. The molecular weight was calculated to be 56,000 by SDS-gel electrophoresis. The enzyme had a pH optimum for activity at 4.0, and its stability range was pH 2.0 ~ 6.0. The temperature optimum was 80°C (10-min assay); however, the enzyme retained full activity after incubation at 70°C for 15 min. The enzyme acted on carboxymethyl cellulose (CMC) and cellulose, as well as on xylan. The Michaelis constants for larchwood xylan and CMC were calculated to be 1.68 mg xylose eq/ml and 0.465 mg glucose eq/ml, respectively. The predominant hydrolysis products from larchwood xylan were xylobiose, xylotriose, and xylose; the release of arabinose from rice-straw arabinoxylan was not detected. CMC was cleaved to cellobiose and larger oligosaccharides. Thus, the enzyme is considered to be an endoenzyme which degrades the β-1,4-glycosyl linkages in xylan and cellulose.     

Purification and characterization of two endoglucanases from Melanocarpus sp. MTCC 3922

This study reports the purification and characterization of endoglucanases (EG I and EG II) from a newly isolated thermophilic fungus, Melanocarpus sp. MTCC 3922. The molecular weight of EG I and EG II as with SDS-PAGE and pI were approximately 40 and 50 kDa, and approximately 4.0 and 3.6, respectively. EG I and EG II were optimally active at 50 and 70 degrees C, and pH 6.0 and 5.0, respectively. EG I was active over a broad range of pH (5.0-7.0), whereas, loss of activity was observed as the temperature was increased from 50 to 80 degrees C. However, EG II was active over pH 4.0-6.0 and temperature 40-80 degrees C. The presence of mercaptoethanol and SDS inhibited the EG I activity but showed no negative effect on EG II. Both the endoglucanases showed higher activity against barley-beta-glucan as compared to CMC. Km values of EG I and EG II for barley-beta-glucan were lower than CMC. Turn over number (K(cat)) and catalytic efficiency (K(cat)/Km) values of both the endoglucanases were higher with barley-beta-glucan as substrate than CMC. EG I showed affinity for Avicel indicating the presence of cellulose binding domains (CBD) whereas, EG II was found to lack CBD.     

Genetic studies of the ribosomal proteins in Escherichia. coli. II. Altered 30s ribosomal protein component specific to spectinomycin resistant mutants

Summary Spectinomycin resistant (spc ^r) mutants were obtained by treating the cells of E. coli K12, W3637 with nitrosoguanidine. The compositions of ribosomal proteins were analyzed for six out of eleven such spc ^r-mutants with chromatography on a carboxymethyl cellulose (CMC) column. The 30s ribosomal subunit from all of the spc ^r-mutants was found to contain the altered 30-4 protein component, while no difference was detected in 50s ribosomal proteins between spc ^r and spc ^s bacteria.Abbreviations used CMC carboxymethyl cellulose - str streptomycin - spc spectinomycin     

The role of macrophages in B cell tolerance. I. Antigen-specific failure of Thy-1, Ly-2 negative adherent cells from tolerant mice to reconstitute immunocompetence in adherent cell deficient spleen cells

T-Cell-independent B-cell tolerance to the hapten derivatives of carboxymethyl cellulose (CMC) or methyl cellulose (MC) appears to be controlled by Thy-1-, Ly-2- adherent (A) cells contained in the spleen or peritoneal fluid. Immunocompetence in nonadherent (NA) normal spleen cells could be restored in vitro by irradiated A cells from normal mice. However, NA cells reconstituted with irradiated A cells derived from hapten specifically tolerant mice failed to respond to the same hapten, but responded normally to an immunogenic challenge with another unrelated antigen. A cells that had been preincubated at 4 degrees C with hapten derivatized MC also failed to restore immunocompetence. While preincubation of unfractionated spleen cells with the tolerogen under the same conditions resulted in B-cell unresponsiveness, such treatment of NA cells failed to render B cells tolerant. Treatment of A cells from tolerant mice with the reducing agent potassium iodide (KI) in vitro restored their capacity to render cultures of NA cells immunocompetent to the relevant hapten. Moreover, treatment with KI of spleen cells from mice injected with the tolerogen was shown to render them responsive. We suggest that B-cell tolerance induced by hapten derivatives of CMC and MC is mediated by suppressive macrophages contained among A cells. Certain subpopulations of macrophages are known to exert cytotoxic effects upon target cells by the release at close range of oxidating agents. We postulate that hapten derivatized CMC and MC, through unique properties of the carrier, bind to and possibly activate macrophages rendering them specifically suppressive for hapten binding B cells.     

Calculation of viscometric constants, hydrodynamic volume, polymer-solvent interaction parameter, and expansion factor for three polysaccharides with different chain conformations

The viscometric constants, K and a, for three polysaccharides: hydroxyethylcellulose (HEC); hydroxypropylcellulose (HPC); and chitosan, were calculated at 30 degrees C using intrinsic viscosity, [eta] and molecular weight (M(n), M(w), M(z)) data. The polydispersity correction factor, q(MHS), and hydrodynamic volume for each polymer sample were also calculated. The value of q(MHS) for the polymer samples was taken into account in the calculation of the viscometric constants. The polymer-solvent interaction parameters for the three polysaccharides were estimated by both semiempirical and numerical methods using intrinsic viscosity and molecular weight data. Hydrodynamic expansion factors were also estimated using the latter data. The quality of the solvents for the three polymers was compared using exponent a, polymer-solvent interaction parameter, and expansion factor data. This study resulted in the following constants for: The values of 0.60, 1.08, and 0.885 for exponents a indicate that HEC, HPC, and chitosan behave as a flexible random coil, linear and extended conformations, respectively. The values of exponents a for the three polysaccharides appear to be inversely related to their K values. The results of the expansion factor were consistent with the results of exponent a and polymer-solvent interaction parameters.     

Purification and properties of an endo-1,4-beta-glucanase from Clostridium josui.

An enzyme active against carboxymethyl cellulose (CMC) was purified from the stationary-phase-culture supernatant of Clostridium josui grown in a medium containing ball-milled cellulose. The purification in the presence of 6 M urea yielded homogeneous enzyme after an approximately 50-fold increase in specific activity and a 13% yield. The enzyme had a molecular mass of 45 kilodaltons. The optimal temperature and pH of the enzyme against CMC were 60 degrees C and 6.8, respectively. The enzyme hydrolyzed cellotetraose, cellopentaose, and cellohexaose to cellobiose and cellotriose but did not hydrolyze cellobiose or cellotriose. A microcrystalline cellulose, Avicel, was also hydrolyzed significantly, but the extent of hydrolysis was remarkably less than that of CMC. On the basis of these results, the enzyme purified here is one of the endo-1,4-beta-glucanases. The N-terminal amino acid sequence of the enzyme is Tyr-Asp-Ala-Ser-Leu-Lys-Pro-Asn-Leu-Gln-Ile-Pro-Gln-Lys-Asn-Ile-Pro-Asn- Asn-Asp-Ala-Val-Asn-Ile-Lys.