Vanillin,a potential agent to prevent biofouling of reverse osmosis membrane

Reverse osmosis (RO) membrane systems are widely used in water purification plants. Reduction in plant performance due to biofilm formation over the membrane is an inherent problem. As quorum sensing (QS) mechanisms of microorganisms have been reported to be involved in the formation of biofilm, ways are sought for quorum quenching (QQ) and thereby prevention of biofilm formation. In this study using a chemostat culture run for seven days in a CDC reactor it was found that a natural QQ compound, vanillin considerably suppressed bacterial biofilm formation on RO membrane. There was 97% reduction in biofilm surface coverage, when grown in the presence of vanillin. Similarly, the average thickness, total biomass and the total protein content of the biofilm that formed in the presence of vanillin were significantly less than that of the control. However vanillin had no effect on 1-day old pre-formed biofilm.     

Feasibility of supercritical CO2 treatment for controlling biofouling in the reverse osmosis process

Physical cleaning and/or chemical cleaning have been generally used to control biofouling in the reverse osmosis (RO) process. However, conventional membrane cleaning methods to control biofouling are limited due to the generation of by-products and the potential for damage to the RO membranes. In this study, supercritical carbon dioxide (SC CO₂) treatment, an environmentally friendly technique, was introduced to control biofouling in the RO process. SC CO₂ (100 bar at 35°C) treatment was performed after biofouling was induced on a commercial RO membrane using Pseudomonas aeruginosa PA01 GFP as a model bacterial strain. P. aeruginosa PA01 GFP biofilm cells were reduced on the RO membrane by >8 log within 30 min, and the permeate flux was sufficiently recovered in a laboratory-scale RO membrane system without any significant damage to the RO membrane. These results suggest that SC CO₂ treatment is a promising alternative membrane cleaning technique for biofouling in the RO process.     

A novel membrane stirrer system enables foam-free biosurfactant production

Bioreactors are the operative backbone, for example, for the production of biopharmaceuticals, biomaterials in tissue engineering, and sustainable substitutes for chemicals. Still, the Achilles' heel of bioreactors nowadays is the aeration which is based on intense stirring and gas sparging, yielding inherent drawbacks such as shear stress, foaming, and sterility concerns. We present the synergistic combination of simulations and experiments toward a membrane stirrer for the efficient bubble-free aeration of bioreactors. A digital twin of the bioreactor with an integrated membrane-module stirrer (MemStir) was developed with computational fluid dynamics (CFD) studies addressing the determination of fluid mixing, shear rates, and local oxygen concentration. Usability of the MemStir is shown in a foam-free recombinant production process of biosurfactants (rhamnolipids) from glucose with different strains of Pseudomonas putida KT2440 in a 3-L vessel and benchmarked against a regular aerated process. The MemStir delivered a maximal oxygen transfer rate (OTR_max) of 175 mmol L⁻¹ h⁻¹ in completely foam-free cultivations. With a high space-time yield (STY) of 118 mg_RL L⁻¹ h⁻¹ during a fed-batch fermentation, the effectiveness of the novel MemStir is demonstrated. Simulations show the generic value of the MemStir beyond biosurfactant production, for example, for animal cell cultivation.     

Validation of 3D simulations of reverse osmosis membrane biofouling

The increasing demand for drinking water and its stricter quality requirements have resulted in an exponentially expanding industry of membrane filtration processes. Currently, reverse osmosis (RO) is the most common method of desalination, able to produce water that is virtually free of pollutants and pathogenic micro‐organisms. Biofouling of these devices however is a significant limitation. Here we present a 3D simulation of RO membrane biofouling based on a lattice Boltzmann (LB) platform that we subsequently favorably compare with experimental data. This data consists of temporally (and spatially) resolved velocity measurements acquired for a RO membrane using magnetic resonance techniques. The effect of biofilm cohesive strength on system pressure drop is then explored; weaker biomass is observed to have a reduced impact on pressure drop (per unit biomass accumulated). Biotechnol. Bioeng. 2010;106: 677–689. © 2010 Wiley Periodicals, Inc.     

Production and characterisation of a biosurfactant isolated from Pseudomonas aeruginosa UW-1

Pseudomonas aeruginosa UW-1 produced 17–24 g L⁻¹ rhamnolipid in vegetable oil-containing media in shake flask cultures in 13 days. In time course studies of growth and rhamnolipid production in a salts medium containing 6% canola oil, total bacterial count reached 2.6 × 10¹⁰ CFU ml⁻¹ after 48 h and a maximum rhamnolipid yield of 24.3 g L⁻¹ was obtained after 9 days. Rhamnolipid components were purified and separated by chloroform-methanol extraction and TLC chromatography. The major rhamnolipid components were characterised as L-rhamnosyl-β-hydroxydecanoyl-β-hydroxydecanoate and L-rhamnosyl-L-rhamnosyl-β-hydroxydecanoyl-β-hydroxydecanoate by nuclear magnetic resonance and mass spectrometry. The components were separated preparatively by silica gel column chromatography. The recovered monorhamnosyl fraction contained no dirhamnosyl moiety while the recovered dirhamnosyl fraction contained 5% of the monorhamnosyl moiety when analyzed by HPLC. The ratio of mono- to dirhamnosyl components produced by P. aeruginosa UW-1 was determined by HPLC to be 4 : 1 by weight. Purified mono- and dirhamnosyl components had the same CMC value of 40 μg ml⁻¹ and decreased the surface tension of water to 27.7 and 30.4 dynes cm⁻¹, respectively. Received 04 April 1997/ Accepted in revised form 15 July 1997     

Enzymatic cleaning of biofouled thin-film composite reverse osmosis (RO) membrane operated in a biofilm membrane reactor

Application of environmentally friendly enzymes to remove thin-film composite (TFC) reverse osmosis (RO) membrane biofoulants without changing the physico-chemical properties of the RO surface is a challenging and new concept. Eight enzymes from Novozyme A/S were tested using a commercially available biofouling-resistant TFC polyamide RO membrane (BW30, FilmTech Corporation, Dow Chemical Co.) without filtration in a rotating disk reactor system operated for 58 days. At the end of the operation, the accumulated biofoulants on the TFC RO surfaces were treated with the three best enzymes, Subtilisin protease and lipase; dextranase; and polygalacturonase (PG) based enzymes, at neutral pH (~7) and doses of 50, 100, and 150 ppm. Contact times were 18 and 36 h. Live/dead staining, epifluorescence microscopy measurements, and 5 μm thick cryo-sections of enzyme and physically treated biofouled membranes revealed that Subtilisin protease- and lipase-based enzymes at 100 ppm and 18 h contact time were optimal for removing most of the cells and proteins from the RO surface. Culturable cells inside the biofilm declined by more than five logs even at the lower dose (50 ppm) and shorter incubation period (18 h). Subtilisin protease- and lipase-based enzyme cleaning at 100 ppm and for 18 h contact time restored the hydrophobicity of the TFC RO surface to its virgin condition while physical cleaning alone resulted in a 50° increase in hydrophobicity. Moreover, at this optimum working condition, the Subtilisin protease- and lipase-based enzyme treatment of biofouled RO surface also restored the surface roughness measured with atomic force microscopy and the mass percentage of the chemical compositions on the TFC surface estimated with X-ray photoelectron spectroscopy to its virgin condition. This novel study will encourage the further development and application of enzymes to remove biofoulants on the RO surface without changing its surface properties.     

Membrane biofouling by chlorine resistant Bacillus spp.: effect of feedwater chlorination on bacteria and membrane biofouling

In this study, bacteria isolated from a lake were characterised for their chlorine resistivity and the effects of chlorination on growth, mortality, protein expression and attachment propensity towards membranes. Biofouling and membrane performance were analysed. All isolated chlorine resistant strains, characterised by 16s rRNA gene sequencing, belonged to the genus Bacillus. Chlorination caused limited effects on bacterial growth and mortality. B. safensis and B. lechinoformis suffered the maximum effects due to chlorination. Live-to-dead ratios immediately after chlorination were above 1.3, with some exceptions. The membrane pure water flux recovery was highly strain dependent. Irreversible membrane fouling was observed with B. aquimaris. Membrane flux decreased substantially during ultrafiltration of water containing chlorine resistant bacteria.     

Effect of rhamnolipid on biodegradation of hydrocarbons in non-aqueous-phase liquid (NAPL)

Aliphatic and aromatic hydrocarbons are environmental pollutants of serious concern. Their bioavailability is the major limiting factor that makes the bioremediation process slow. Therefore, the present study focuses on biodegradation of non-aqueous-phase liquids (NAPL) by a halophilic consortium (Pseudomonas aeruginosa and Escherichia fergusonii) in presence of rhamnolipid as well as a rhamnolipid-producing Pseudomonas aeruginosa AMB AS7. The study was performed in microcosms, and the residual hydrocarbons after degradation were estimated by gas chromatography. It was found that the degradation of hydrocarbons in NAPL was more in presence of rhamnolipid in comparison with their biotic controls. However, among NAPL, the degradation of phenanthrene (37.5%) and octadecane (47.8%) was found to be more by co-culture of halophilic consortium and rhamnolipid-producing P. aeruginosa AMB AS7. Denaturing gradient gel electrophoresis was performed to determine the viability of different bacterial strains (halophilic and rhamnolipid-producing bacterial strain). Besides, the results also revealed that during NAPL degradation, the cell surface hydrophobicity (CSH) of halophilic consortium increased from 9.12% to 69.55% when added with 100 mg/L of rhamnolipid, whereas CSH of rhamnolipid-producing P. aeruginosa AMB AS7 was constant at 31.9%, even though it produced about 271.8 mg/L of rhamnolipid.     

Continuous rhamnolipid production using denitrifying Pseudomonas aeruginosa cells in hollow‐fiber bioreactor

Rhamnolipids are high‐value effective biosurfactants produced by Pseudomonas aeruginosa. Large‐scale production of rhamnolipids is still challenging especially under free‐cell aerobic conditions in which the highly foaming nature of the culture broth reduces the productivity of the process. Immobilized systems relying on oxygen as electron acceptor have been previously investigated but oxygen transfer limitation presents difficulties for continuous rhamnolipid production. A coupled system using immobilized cells and nitrate instead of oxygen as electron acceptor taking advantage of the ability of P. aeruginosa to perform nitrate respiration was evaluated. This denitrification‐based immobilized approach based on a hollow‐fiber setup eliminated the transfer limitation problems and was found suitable for continuous rhamnolipid production in a period longer than 1,500 h. It completely eliminated the foaming difficulties related to aerobic systems with a comparable specific productivity of 0.017 g/(g dry cells)‐h and allowed easy recovery of rhamnolipids from the cell‐free medium. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29: 346–351, 2013     

产鼠李糖脂生物表面活性剂大肠杆菌的构建与优化

目前鼠李糖脂生物表面活性剂主要由条件致病的铜绿假单胞菌生产获得,从而影响工业应用。为了开发一种相对安全的鼠李糖脂生产菌,将带有不同强度组成型合成启动子的鼠李糖基转移酶基因(Rhamnosyltransferase gene,rhl AB)以单、中、高3种拷贝数分别在大肠杆菌ATCC 8739中异源表达,实现了不同产量的鼠李糖脂异源合成。对rhl AB基因和rha BDAC基因簇(TDP-L-鼠李糖合成的基因簇)进一步利用合成启动子进行组合调控,筛选获得了最优生产鼠李糖脂工程菌——大肠杆菌TIB-RAB226。对大肠杆菌TIB-RAB226进行发酵温度优化,鼠李糖脂产量达到124.3 mg/L,是优化前的1.17倍。通过分批补料发酵,12h时鼠李糖脂产量达到209.2 mg/L。对发酵产物进行高效液相色谱-质谱联用技术分析,共检出相对含量变化的5类质核比不同的鼠李糖脂同系物。本研究可为异源合成产鼠李糖脂提供重要参考。     

Non-destructive approaches for assessing biofouling of household reverse osmosis membranes

Abstract

This study determined economic non-destructive methods to assess biofouling in point of use reverse osmosis (RO) membrane treatment systems. Three parallel household RO membrane units were operated under controlled feed water conditions to promote biofouling, inorganic fouling and a combination of both. Operational and biological parameters were monitored throughout the systems’ lifespan. Membrane autopsies assessed the degree and type of fouling. Statistical models determined statistically relevant parameters for fouling types that were validated with membrane autopsies. Permeate flow rates decreased differently with biofouling vs inorganic fouling. Large increases in permeate conductivity were noted in membranes suffering from biofouling and not in inorganically fouled membranes. The concentration of cell clumps from detached biofilm in the retentate increased in membranes experiencing biofouling and no increase was seen for inorganically fouled membranes. A combination of these methods could be used to conveniently assess the types of fouling experienced by RO systems.     

发酵碳源对铜绿假单胞菌NY3所产鼠李糖脂结构及性能的影响

为研究发酵碳源对铜绿假单胞菌NY3所产鼠李糖脂结构及性能的影响,从鼠李糖脂的结构组分、性能和应用效果等方面展开研究。薄层实验证明两种鼠李糖脂均含有单糖脂和双糖脂。液质分析发现以橄榄油作碳源时,鼠李糖脂中双糖脂(Rha-Rha-C5-C6:1和Rha-Rha-C8-C8:2)比例更大,约为73.09%。而地沟油作碳源时,单糖脂(Rha-C10-C10和Rha-C16-C16:2)的比例更高,约为76.91%。橄榄油和地沟油为碳源的鼠李糖脂的临界胶束浓度(CMC)分别为55 mg/L和80mg/L。相同投加量时,前者乳化性和乳化稳定性均优于后者。NY3菌降解含油污泥时,投加双糖脂含量高的鼠李糖脂会使C16-C30直链烷烃的去除率更高。     

Comparing membrane and spacer biofouling by Gram-negative Pseudomonas aeruginosa and Gram-positive Anoxybacillus sp. in forward osmosis

Bacteria of different Gram-types have inherently different outer cell structures, influencing cell surface properties and bacterial attachment. Dynamic biofouling experiments were conducted over four days in a bench-scale forward osmosis (FO) system with Gram-negative Pseudomonas aeruginosa or Gram-positive Anoxybacillus sp. Biofouling resulted in ～10% decline in FO permeate water flux and was found to be significant for Anoxybacillus sp. but not for P. aeruginosa. Additionally, a stronger permeate water flux decline for P. aeruginosa in experiments with a superhydrophilic feed spacer demonstrated that mitigation methods require testing with different bacterial Gram-types. It was found that although permeate water flux decline can be affected by bacterial Gram-type the stable performance under enhanced biofouling conditions highlights the potential of FO for wastewater reclamation.     

Folding of outer membrane protein A in the anionic biosurfactant rhamnolipid

Folding and stability of bacterial outer membrane proteins (OMPs) are typically studied in vitro using model systems such as phospholipid vesicles or surfactant. OMP folding requires surfactant concentrations above the critical micelle concentration (cmc) and usually only occurs in neutral or zwitterionic surfactants, but not in anionic or cationic surfactants. Various Gram-negative bacteria produce the anionic biosurfactant rhamnolipid. Here we show that the OMP OmpA can be folded in rhamnolipid at concentrations above the cmc, though the thermal stability is reduced compared to the non-ionic surfactant dodecyl maltoside. We discuss implications for possible interactions between OMPs and biosurfactants in vivo.     

The construction of a zwitterionic PVDF membrane surface to improve biofouling resistance

Biofouling of membrane surfaces by the attachment of microorganisms is one of the major obstacles for ensuring the effectiveness of membrane separation processes. This work presents the construction of a zwitterionic PVDF membrane surface with improved resistance to biofouling. An amphiphilic copolymer of poly(vinylidene fluoride)-graft-poly(N,N-dimethylamino-2-ethylmethacrylate) (PVDF-g-PDMAEMA) was first synthesized via radical graft copolymerization and then the flat membrane was cast with immersed phase inversion. The PDMAEMA side chains tended to aggregate on the membrane surface, pore surface and internal pore channel surface, and were converted with 1,3-propane sultone (1,3-PS) to yield a zwitterionic membrane surface. A higher conversion of PDMAEMA chains and distribution of zwitterions were obtained using a longer treatment time. A biofouling assay indicated that incorporation of zwitterions suppressed the adsorption of extracellar polymer substances and the adhesion of Escherichia coli bacterial cells to the membrane surface, endowing the membrane with a high flux recovery and biofouling resistance in the filtration process.     

Stimulating in-soil rhamnolipid production in a bioslurry reactor by limiting nitrogen

A soil with aged contamination from lubricating oil (LO) and polychlorinated biphenyls (PCBs) was treated in a bioslurry reactor to investigate in-soil biosurfactant production by Pseudomonas aeruginosa, the most abundant indigenous, culturable, hydrocarbon-degrading microorganism. After 2 days of growth on LO, a depletion of nitrogen stimulated the production and accumulation of rhamnolipids to levels roughly 20 times the critical micelle concentration. Surface tensions and concentrations of monorhamnolipid and dirhamnolipid, PCBs, and total petroleum hydrocarbons (TPH) were measured in a slurry filtrate. Soil-bound PCBs and TPH were also quantified. Rhamnolipid production was observed within 1 to 2 days after nitrogen depletion in each of the 10 batches tested. By day 6, total rhamnolipid concentrations increased from below detection to average values over 1,000 mg/L, which caused over 98% of soil-bound PCBs and over 99% of TPH to be emulsified and recovered in the filtrate. After 70 days, rhamnolipid concentrations were only reduced by 15%, because of nitrogen-limited rates of rhamnolipid biodegradation. The results show that in-soil biosurfactant production can be stimulated in a controlled way with nutrient limitation and can be used to achieve soil washing.     

Application of zinc oxide and sodium alginate for biofouling mitigation in a membrane bioreactor treating urban wastewater

Abstract

This research aimed to mitigate fouling in membrane bioreactors (MBR) through concurrent usage of zinc oxide as an antibacterial agent (A) and sodium alginate as a hydrophilic agent (H) within a polyacrylonitrile membrane (PM) structure. The antibacterial polymeric membranes (APM) and antibacterial hydrophilic polymeric membranes (AHPM) synthesized showed a higher porosity, mechanical strength and bacterial inhibition zone, and a lower contact angle in comparison with PM membranes. EDS, SEM and AFM analyses were used to characterize the chemical, structural, and morphological properties of PM, APM, and AHPM. The flux of PM, APM, and AHPM in MBR was 37, 48, and 51?l m^?2 h^?1 and COD removal was 81, 93.5, and 96.7%, respectively. After MBR operation for 35?days in an urban wastewater treatment, only 50% of the flux of PM was recovered, while the antibacterial and hydrophilic agents yielded a flux recovery of 72.7 and 100% for APM and AHPM, respectively.     

Cleaning efficacy of hydroxypropyl-beta-cyclodextrin for biofouling reduction on reverse osmosis membranes

In this study, an environmentally friendly compound, hydroxypropyl-beta-cyclodextrin (HP-β-CD) was applied to clean reverse osmosis (RO) membranes fouled by microorganisms. The cleaning with HP-β-CD removed the biofilm and resulted in a flux recovery ratio (FRR) of 102%. As cleaning efficiency is sometimes difficult to determine using flux recovery data alone, attached bacterial cells and extracellular polymeric substances (EPS) were quantified after cleaning the biofouled membrane with HP-β-CD. Membrane surface characterization using scanning electron microscopy (SEM), attenuated total reflectance Fourier transform infrared (ATR-FTIR) and atomic force microscopy (AFM) confirmed the effectiveness of HP-β-CD in removal of biofilm from the RO membrane surface. Finally, a comparative study was performed to investigate the competitiveness of HP-β-CD with other known cleaning agents such as sodium dodecyl sulfate (SDS), ethylenediaminetetraacetic acid (EDTA), Tween 20, rhamnolipid, nisin, and surfactin. In all cases, HP-β-CD was superior.     

基因工程微生物合成鼠李糖脂表面活性剂的研究进展

鼠李糖脂是一类重要的生物表面活性剂。相比于化学合成的表面活性剂,其具有更优秀的理化性质及环境友好等特点,被广泛应用于微生物采油、环境污染修复等工程中。目前,鼠李糖脂的工业生产主要采用铜绿假单胞菌这一具有致病性的天然合成菌株,与此同时,受菌株遗传背景的限制,优化发酵过程等方法在产量提升方面遇到了一些瓶颈问题。利用基因工程方法对菌株进行改良有望进一步提高鼠李糖脂生产的安全性、产量、产物性能等多项指标,因此受到了越来越广泛的关注。本文综述了近年来利用基因工程方法优化鼠李糖脂生物合成的最新进展,讨论了异源合成、代谢通路改造、基因表达优化、蛋白质工程、底盘工程等多种策略的应用,并展望了一系列可行的研究方向。