Short-term testing of antifouling surfaces: the importance of colour

Data from short-term biofouling assays are frequently used to evaluate the performance of antifouling (AF) coatings. There are a large number of factors, however, that may influence community development. One such factor is colour. The hypothesis was that differences in colour may impact the short-term development of a biofouling community and therefore bias the results. An experiment was designed to investigate the effect of black and white substrata on settlement of fouling organisms in the field. Both Ulva sp. and Spirorbis sp. had significantly higher settlement on black surfaces. This result emphasises the importance of considering colour and other factors when undertaking short-term testing of AF coatings.     

The performance of hybrid titania/silica-derived xerogels as active antifouling/fouling-release surfaces against the marine alga Ulva linza: in situ generation of hypohalous acids

Mixed titania/silica xerogels were prepared using titanium tetraisopropoxide (TTIP) and tetraethoxy orthosilicate (TEOS). Xerogel properties were modified by incorporating n-octyltriethoxysilane (C8). The xerogels catalyze the oxidation of bromide and chloride with hydrogen peroxide (H₂O₂) to produce hypohalous acids at pH 7 and pH 8. The antifouling/ fouling-release performance of a TTIP/C8/TEOS xerogel in the presence and absence of H₂O₂ was evaluated for the settlement of zoospores of the marine alga Ulva linza and for the removal of sporelings (young plants). In the absence of H₂O₂, differences in the settlement of zoospores and removal of sporelings were not significant relative to a titanium-free C8/TEOS xerogel. Addition of H₂O₂ gave a significant reduction in zoospore settlement and sporeling removal relative to the C8/TEOS xerogel and relative to peroxide-free conditions. The impact of TTIP on xerogel characteristics was evaluated by comprehensive contact angle analysis, scanning electron microscopy, and X-ray photoelectron spectroscopy.     

Engineered antifouling microtopographies: kinetic analysis of the attachment of zoospores of the green alga Ulva to silicone elastomers

Microtopography has been demonstrated as an effective deterrent to biofouling. The majority of published studies are fixed-time assays that raise questions regarding the kinetics of the attachment process. This study investigated the time-dependent attachment density of zoospores of Ulva, in a laboratory assay, on a micropatterned and smooth silicone elastomer. The attachment density of zoospores was reduced on average 70–80% by the microtopography relative to smooth surfaces over a 4 h exposure. Mapping the zoospore locations on the topography revealed that they settled preferentially in specific, recessed areas of the pattern. The kinetic data fit, with high correlation (r ² > 0.9), models commonly used to describe the adhesion of bacteria to surfaces. The grouping of spores on the microtopography indicated that the pattern inhibited the ability of attached spores to recruit neighbors. This study demonstrates that the antifouling mechanism of topographies may involve disruption of the cooperative effects exhibited by fouling organisms such as Ulva.     

Development of the initial diatom microfouling layer on antifouling and fouling-release surfaces in temperate and tropical Australia

Diatoms are a major component of the slime layers that form on artificial surfaces in marine environments. In this article, the role played by diatoms during the pioneering stages of colonization of three marine antifouling (AF) coatings, viz Intersmooth 360®, Super Yacht 800® and a fouling-release (FR) coating Intersleek 700®, was investigated. The study was conducted over three distinct seasons in two very different marine environments in Australia, ie temperate Williamstown, Victoria and tropical Cairns, Queensland. Diatom fouling occurred more rapidly on the FR coating Intersleek 700, compared to both biocidal AF paints. However, colonization by diatoms on all three coatings was generally slow during the 16-day study. Benthic diatoms do not subsist by floating around in the water column, rather they only gain the opportunity to colonize new surfaces when they either voluntarily release or are displaced from their benthic habitat, thereafter entering the water column where the opportunity to adhere to a new surface presents itself. However, once settled, fouling diatoms grow exponentially from the site of attachment, spreading out until they populate large areas of the surface. This mode of surface colonization correlates more with an ‘infection’ type, epidemiology model, a mechanism that accounts for the colonization of significant regions of the coating surface from a single fouling diatom cell, forming ‘clonal patches’. This is in comparison to the bacterial colonization of the surface, which exhibits far more rapid recruitment and growth of cells on the substratum surface. Therefore, it is hypothesized that fouling diatoms may be characterized more by their ability to adhere and grow on surfaces already modified by bacterial biofilms, rather than on their strength of adhesion. Cell morphology and the ability to avoid shear may also be an important factor.     

Natural products as antifouling compounds: recent progress and future perspectives

Since early 2008, an increasing number of countries have ratified an international treaty to ban the application of antifouling (AF) coatings based on organotin compounds (eg tributyltin (TBT) and triphenyltin). As a result, the demand for environmentally friendly, non-toxic or low-toxicity AF compounds and technologies (green AF agents) has become an urgent reality. Marine coatings based on Cu₂O and various other biocides have a negative impact on the environment and they must eventually be replaced by new, effective, and environmentally friendly AF compounds. This mini-review describes important AF compounds discovered from a variety of organisms from 2004 until mid 2009, and discusses recent and general trends in the discovery of AF compounds. Finally, a perspective on the future of AF compound development is presented. The discussion is aimed at updating scientists and engineers on the current challenges facing AF research.     

Cold spray metal embedment: an innovative antifouling technology

The study demonstrates that embedment of copper particles into thermoplastic polymers (polymers) using cold spray technology is an effective deterrent against fouling organisms. Two polymers, high-density polyethylene (HDPE) and nylon were metallised with copper powder using cold spray technology. After 250 days in the field, Cu-embedded HDPE and copper plate controls were completely free of hard foulers compared to Cu-embedded nylon and polymer controls which were heavily fouled with both soft and hard fouling. Antifouling (AF) success is related to the interaction between the properties of the polymers (elastic modulus and hardness) and the cold spray process which affect particle embedment depth, and subsequently, the release of copper ions as determined by analytical techniques. Embedding metal using cold spray equipment is shown to be an effective AF technology for polymers, in particular those that are difficult to treat with standard AF coatings, with efficacy being a function of the interaction between the cold spray metal and the polymer recipient.     

Engineered antifouling microtopographies: mapping preferential and inhibitory microenvironments for zoospore attachment

An algorithm was developed and implemented to map the locations of attached spores of Ulva linza on patterned surfaces. Using this mapping algorithm, spore preference among regions within a pattern can be detected and quantified. Settlement maps of spores on patterned topographies from several assays showed clear preferences in spore settlement. Over 94% of the spores attached within the depressed regions on the surfaces, including a surface containing pits instead of protruding features. The spores attached primarily at the intersections of several features, with over half and up to 96% of spores settling in these regions. The highest spore densities occurred at intersections where the features were most dissimilar. In contrast, the location of attached beads on the surfaces was nearly uniform across the surface. Identification of preferential attachment locations allows for the study of localized properties that influence cell behavior and aids in the development of new surfaces to control cell–surface interactions.     

Pioneer marine biofilms on artificial surfaces including antifouling coatings immersed in two contrasting French Mediterranean coast sites

Marine biofilm communities that developed on artificial substrata were investigated using molecular and microscopic approaches. Polystyrene, Teflon® and four antifouling (AF) paints were immersed for 2 weeks at two contrasting sites near Toulon on the French Mediterranean coast (Toulon military harbour and the natural protected area of Porquerolles Island). Biofilms comprising bacteria and diatoms were detected on all the coatings. The population structure as well as the densities of the microorganisms differed in terms of both sites and coatings. Lower fouling densities were observed at Porquerolles Island compared to Toulon harbour. All bacterial communities (analysed by PCR-DGGE) showed related structure, controlled both by the sites and the type of substrata. Pioneer microalgal communities were dominated by the same two diatom species, viz. Licmophora gracilis and Cylindrotheca closterium, at both sites, irrespective of the substrata involved. However, the density of diatoms followed the same trend at both sites with a significant effect of all the AF coatings compared to Teflon and polystyrene.     

Oxygen-depleted surfaces: a new antifouling technology

A novel, non-toxic strategy to combat marine biofouling is presented. The technology is paint with additions of up to 43% of industrial protein. Through microbial degradation of the protein component, an oxygen-depleted layer rapidly forms in a 0.2 mm layer close to the paint surface. With the present paint formulations, a stable, O₂-depleted layer can persist for 16 weeks. Barnacle larvae (cyprids) did not settle on panels where oxygen saturation was <20%, and cyprids were killed when exposed to O₂-free water for more than 1 h. It is also shown that the O₂-depleted layer will rapidly reform (within 15 min) after exposure to turbulent flow. Field exposure of panels for 16 weeks showed that paint with protein reduced fouling by barnacles and bryozoans by 80% and close to 100%, respectively. The results suggest that this novel technology may be developed into a non-toxic alternative to copper-based antifouling paints, especially for pleasure boats in sensitive environments. There is clearly potential for further development of the paint formulation, and a full-scale test on a boat-hull suggested that service-life under realistic operations needs to be improved.     

Bioassays and field immersion tests: a comparison of the antifouling activity of copper-free poly(methacrylic)-based coatings containing tertiary amines and ammonium salt groups

This paper focuses on the activity spectrum of three dimethylalkyl tertiary amines as potential active molecules and the corresponding ammonium salt-based antifouling (AF) paints. Bioassays (using marine bacteria, microalgae and barnacles) and field tests were combined to assess the AF activity of coatings. Bioassay results demonstrated that the ammonium salt-based paints did not inhibit the growth of microorganisms (except the dimethyldodecylammonium-based coatings) and that the tertiary amines were potent towards bacteria, diatoms, and barnacle larvae at non-toxic concentrations (therapeutic ratio, LC₅₀/EC₅₀, < 1). The results from field tests indicated that the ammonium salt-based coatings inhibited the settlement of macrofouling and the dimethylhexadecylammonium-based coatings provided protection against slime in comparison with PVC blank panels. Thus, results from laboratory assays did not fully concur with the AF activity of the paints in the field trial.     

Potential antifouling strategies for marine finfish aquaculture: the effects of physical and chemical treatments on the settlement and survival of the hydroid Ectopleura larynx

The hydroid Ectopleura larynx is a common fouling organism on aquaculture nets. To contribute to the development of novel cleaning methods, laboratory and field studies determined the effects of heat (30, 40, 50 and 60°C for immersion times of 1 and 3 s) and acetic acid (0.2 and 2.0% for immersion times of 1, 3 and 10 s, 1 and 5 min) on the settlement of actinulae and the survival of juvenile and adult E. larynx. Laboratory studies showed that, regardless of immersion time, a temperature of 50°C was effective in preventing the settlement of actinulae and the survival of juveniles, while ≤12% of adult hydroids could survive. A temperature of 60°C killed all adult hydroids. For an acetic acid concentration of 0.2%, an immersion time of 1 min substantially reduced the settlement of actinulae and the survival of juvenile and adult hydroids, and none of the juvenile and adult hydroids survived after 5 min. For an acetic acid concentration of 2.0%, all immersion times were effective and reduced the mean settlement of actinulae and the survival of juvenile and adult hydroids to ≤10%. Field studies with fouled net panels exposed to selected heat or acetic acid treatments showed small reductions in mean wet weight and net aperture occlusion of the net panels 2 and 5 days after treatment. Visual inspections of the net panels showed that hydranths of the hydroids were shed, but the dead stolons of the hydroids remained on the treated net panels. Novel cleaning methods and devices may utilise these results to effectively kill E. larynx on aquaculture nets, while further studies are needed to determine the necessity of removing the dead hydroids before further biofouling accumulates on thenets.     

Engineered antifouling microtopographies: the role of Reynolds number in a model that predicts attachment of zoospores of Ulva and cells of Cobetia marina

A correlation between the attachment density of cells from two phylogenetic groups (prokaryotic Bacteria and eukaryotic Plantae), with surface roughness is reported for the first time. The results represent a paradigm shift in the understanding of cell attachment, which is a critical step in the biofouling process. The model predicts that the attachment densities of zoospores of the green alga, Ulva, and cells of the marine bacterium, Cobetia marina, scale inversely with surface roughness. The size and motility of the bacterial cells and algal spores were incorporated into the attachment model by multiplying the engineered roughness index (ERI_II), which is a representation of surface energy, by the Reynolds number (Re) of the cells. The results showed a negative linear correlation of normalized, transformed attachment density for both organisms with ERI_II · Re (R ² = 0.77). These studies demonstrate for the first time that organisms respond in a uniform manner to a model, which incorporates surface energy and the Reynolds number of the organism.     

Survival,growth, settlement and metamorphosis of refrigerated larvae of the mussel Mytilus galloprovincialis Lamarck and their use in settlement and antifouling bioassays

Abstract

Straight-hinge veliger and pediveliger larvae of the mussel Mytilus galloprovincialis were refrigerated for varying periods for use in bioassays. Straight-hinge veliger larvae grew to the umbo-veliger stage after 2 months in the refrigerator, but no pediveligers were observed during the 3-month refrigeration period. The average survival rate of larvae in the refrigerator was 79% after 1 month, but gradually decreased with the refrigeration period, and was as low as 22% after 3 months. All refrigerated larvae grew to the pediveliger stage in the incubator at 17°C at the same rate as that of the control larvae that were not refrigerated. Settlement and metamorphosis of pediveligers from both refrigerated and control groups were facilitated by microbial film and epinephrine and inhibited by phentolamine. Thus, refrigeration can be used as an effective method of storing larvae of M. galloprovincialis for use in assays to assess candidate settlement inducers and antifouling substances.     

Effect of background colour on growth and adhesion strength of Ulva sporelings

This study examined the effects of a range of black, grey and white substrata on the growth and attachment strength of Ulva sporelings on glass and polydimethylsiloxane (Silastic®-T2) surfaces. The rate of development of sporelings was strongly influenced by the colour of the substratum on which they grew. On black backgrounds, sporelings grew slowly and germination was delayed. Laboratory screening methods for antifouling and fouling-release coatings that rely on the growth of Ulva sporelings can be compromised if samples are of different colours. Hydrodynamic removal of sporelings from coatings may also be affected by substratum colour, since smaller plants generate lower hydrodynamic forces making them more difficult to remove.     

抗污损海洋天然产物的开发及其作用机理研究进展

首先对近年发表在学术期刊Biofouling上的一篇关于抗污损化合物的综述做一简短总结。其次,突出介绍了对无脊椎污损生物附着和变态分子水平的调控机制的研究近来的进展。旨在给那些从事生物污损和抗污损技术研究的科研人员提供一定的帮助。     

Analysis of long-term mechanical grooming on large-scale test panels coated with an antifouling and a fouling-release coating

Long-term grooming tests were conducted on two large-scale test panels, one coated with a fluorosilicone fouling-release (FR) coating, and one coated with a copper based ablative antifouling (AF) coating. Mechanical grooming was performed weekly or bi-weekly using a hand operated, electrically powered, rotating brush tool. The results indicate that weekly grooming was effective at removing loose or heavy biofilm settlement from both coatings, but could not prevent the permanent establishment of low-profile tenacious biofilms. Weekly grooming was very effective at preventing macrofouling establishment on the AF coating. The effectiveness of weekly grooming at preventing macrofouling establishment on the FR coating varied seasonally. The results suggest that frequent mechanical grooming is a viable method to reduce the fouling rating of ships’ hulls with minimal impact to the coating. Frequent grooming could offer significant fuel savings while reducing hull cleaning frequencies and dry dock maintenance requirements.     

The potential for translocation of marine species via small-scale disruptions to antifouling surfaces

Vessel hull fouling is a major vector for the translocation of nonindigenous species (NIS). Antifouling (AF) paints are the primary method for preventing the establishment and translocation of fouling species. However, factors such as paint age, condition and method of application can all reduce the effectiveness of these coatings. Areas of hull that escape AF treatment (through limited application or damage) constitute key areas that may be expected to receive high levels of fouling. The investigation focused on whether small-scale (mm² to cm²) areas of unprotected surface or experimental ‘scrapes’ provided sufficient area for the formation of fouling assemblages within otherwise undamaged AF surfaces. Recruitment of fouling taxa such as algae, spirorbids and hydroids was recorded on scrapes as narrow as 0.5 cm wide. The abundance and species richness of fouling assemblages developing on scrapes ≥1 cm often equalled or surpassed levels observed in reference assemblages totally unprotected by AF coatings. Experiments were conducted at three sites within the highly protected and isolated marine park surrounding Lady Elliott Island at the southernmost tip of the Great Barrier Reef, Australia. Several NIS were recorded on scrapes of AF coated surfaces at this location, with 1-cm scrapes showing the greatest species richness and abundance of NIS relative to all other treatments (including controls) at two of the three sites investigated. Slight disruptions to newly antifouled surfaces may be all that is necessary for the establishment of fouling organisms and the translocation of a wide range of invasive taxa to otherwise highly protected marine areas.     

Activity of Commercial Enzymes on Settlement and Adhesion of Cypris Larvae of the Barnacle Balanus amphitrite,Spores of the Green Alga Ulva linza,and the Diatom Navicula perminuta

Fouling species produce adhesive polymers during the settlement, adhesion and colonization of new surfaces in the marine environment. The present paper tests the hypothesis that enzymes of the appropriate specificity may prevent biofouling by hydrolysing these adhesive polymers. Seventeen commercially available enzyme preparations designed originally for bulk use in a range of end-use applications were tested for their effects on the settlement and/or adhesion of three major fouling species, viz. the green alga Ulva linza, the diatom Navicula perminuta and the barnacle Balanus amphitrite. The serine-proteases were found to have the broadest antifouling potential reducing the adhesion strength of spores and sporelings of U. linza, cells of N. perminuta and inhibiting settlement of cypris larvae of B. amphitrite. Mode-of-action studies on the serine-protease, Alcalase, indicated that this enzyme reduced adhesion of U. linza in a concentration-dependent manner, that spores of the species could recover their adhesive strength if the enzyme was removed and that the adhesive of U. linza and juvenile cement of B. amphitrite became progressively less sensitive to hydrolysis as they cured.     

Studies on fouling by the freshwater mussel limnoperna fortunei and the antifouling effects of low energy surfaces

Attachment of the freshwater mussel, Limnoperna fortunei, was tested using non‐treated surfaces, viz. glass, nylon, rubber, silicone and Teflon, together with glass surfaces modified with nine kinds of silane coupling agents. Among the surfaces tested, the mussel avoided attaching to Teflon, silicone, and glass modified with 3‐bromopropyltrimethoxysilane or 3,3,3‐(trifluo‐ropropyl)‐trimethoxysilane. With respect to the relationship between the percentage attachment and the surface free energy (sfe) of the substrates, it was found that attachment was considerably reduced on the substrates which exhibited relatively low sfe, as above. The mean number of secreted byssuses per attaching mussel also decreased with decreasing substrate sfe. Furthermore, when the sfe was divided into the dispersion and polar components, the percentage mussel attachment was related to the polar component. These results suggest that effective antifouling towards L. fortunei is achieved on substrates with a low sfe polar component.