Short-term testing of antifouling surfaces: the importance of colour

Abstract

Data from short-term biofouling assays are frequently used to evaluate the performance of antifouling (AF) coatings. There are a large number of factors, however, that may influence community development. One such factor is colour. The hypothesis was that differences in colour may impact the short-term development of a biofouling community and therefore bias the results. An experiment was designed to investigate the effect of black and white substrata on settlement of fouling organisms in the field. Both Ulva sp. and Spirorbis sp. had significantly higher settlement on black surfaces. This result emphasises the importance of considering colour and other factors when undertaking short-term testing of AF coatings.     

Efficacy of a biocide tested on selected lichens and its effects on their substrata

The efficacy of Koretrel^©, a biocide used in south-eastern Asia to remove epilithic photoautotrophic organisms, was tested in the field and laboratory using lichens as target organisms. In situ observations were carried out at increasing time intervals for 6 month on 15 vegetation plots and 21 saxicolous species representative of the lichen flora of Italian monuments, selected according to their different ecology, growth-form and distribution. Change in chlorophyll fluorescence was monitored in three species for 32 day after biocide treatment. The effects of the biocide on the substratum was studied by monitoring changes in capillary water absorption and surface colorimetry of two CaCO₃-containing rocks (Aurisina limestone and Muggia sandstone), and a grey granite. Rock crystal integrity was monitored by SEM. The results show that Koretrel^© is very efficient in killing the lichens. Pronounced effects were observed in all species after 1–2 weeks, with chlorophyll fluorescence reduced to zero in 4 day in the case of Lecanora muralis and Neofuscelia loxodes and in 8 days for Caloplaca saxicola. The biocide considerably decreases capillary water absorption, and alters the surface colour of the substrata, particularly for Aurisina limestone. However, no corrosion features were observed in the rock minerals.     

Crustose coralline algal species host distinct bacterial assemblages on their surfaces

Crustose coralline algae (CCA) are important components of many marine ecosystems. They aid in reef accretion and stabilization, create habitat for other organisms, contribute to carbon sequestration and are important settlement substrata for a number of marine invertebrates. Despite their ecological importance, little is known about the bacterial communities associated with CCA or whether differences in bacterial assemblages may have ecological implications. This study examined the bacterial communities on four different species of CCA collected in Belize using bacterial tag-encoded FLX amplicon pyrosequencing of the V1–V3 region of the 16S rDNA. CCA were dominated by Alphaproteobacteria, Gammaproteobacteria and Actinomycetes. At the operational taxonomic unit (OTU) level, each CCA species had a unique bacterial community that was significantly different from all other CCA species. Hydrolithon boergesenii and Titanoderma prototypum, CCA species that facilitate larval settlement in multiple corals, had higher abundances of OTUs related to bacteria that inhibit the growth and/or biofilm formation of coral pathogens. Fewer coral larvae settle on the surfaces of Paragoniolithon solubile and Porolithon pachydermum. These CCA species had higher abundances of OTUs related to known coral pathogens and cyanobacteria. Coral larvae may be able to use the observed differences in bacterial community composition on CCA species to assess the suitability of these substrata for settlement and selectively settle on CCA species that contain beneficial bacteria.     

Use of artificial substrata by introduced and cryptogenic marine species in Paranaguá Bay,southern Brazil

Abstract

Ports are important locations for the introduction of marine species, while marinas and pontoons often serve as secondary habitats for these species. In a marina near Paranaguá Port, a major international port in southern Brazil, the encrusting community was studied to (i) identify possibly introduced species, and (ii) examine the use of artificial substrata by these species. Samples (20 × 20 cm) were taken from fibreglass floats (boardwalks and boat hulls) and concrete columns. A total of 85 species were found of which 50 were classified into three categories: four introduced, 33 cryptogenic and 13 native. The introduced species were the hydrozoan Garveia franciscana (on floats, boats and submerged concrete), the polychaete Polydora cornuta (more abundant on floats and submerged concrete) and the barnacles Amphibalanus reticulatus (equally abundant on the three substrata) and Striatobalanus amaryllis (only on floats and submerged concrete). Organisms were most abundant on floating boardwalks, while species richness and composition were similar to that on boat hulls (32 and 37, respectively), which are an important vector for intraregional transport. All substrata supported at least three of the four introduced, and many of the cryptogenic species. The proportion of introduced to the total number of species was greater than observed in other ports. This demonstrates that the introduction potential is great in Paranaguá Bay, especially considering that this study was restricted to one site and sampled only hard substrata. None of the introduced species has yet been identified as invasive, but all are generalists with respect to substratum, indicating their invasive potential. The ability to colonise stable concrete walls shows that they could also colonise the natural granite rocky substrata in the bay, and the ability to colonise floating surfaces indicate their capability of spreading in the region on the hulls of recreational boats.     

The effect of surface colour on the formation of marine micro and macrofouling communities

The effect of substratum colour on the formation of micro- and macro fouling communities was investigated. Acrylic tiles, painted either black or white were covered with transparent sheets in order to ensure similar surface properties. All substrata were exposed to biofouling at 1?m depth for 40?d in the Marina Bandar al Rowdha (Muscat, Sea of Oman). Studies were conducted in 2010 over a time course of 5, 10 and 20?d, and in 2012 samples were collected at 7, 14 and 21?d. The densities of bacteria on the black and white substrata were similar with the exception of day 10, when the black substrata had a higher abundance than white ones. Pyrosequencing via 454 of 16S rRNA genes of bacteria from white and black substrata revealed that Alphaproteobacteria and Firmicutes were the dominant groups. SIMPER analysis demonstrated that bacterial phylotypes (uncultured Gammaproteobacteria, Actibacter, Gaetbulicola, Thalassobius and Silicibacter) and the diatoms (Navicula directa, Navicula sp. and Nitzschia sp.) contributed to the dissimilarities between communities developed on white and black substrata. At day 20, the highest amount of chlorophyll a was recorded in biofilms developed on black substrata. SIMPER analysis showed that Folliculina sp., Ulva sp. and Balanus amphitrite were the major macro fouling species that contributed to the dissimilarities between the communities formed on white and black substrata. Higher densities of these species were observed on black tiles. The results emphasise the effect of substratum colour on the formation of micro and macro fouling communities; substratum colour should to be taken into account in future studies.     

The European oyster <Emphasis Type="Italic">(Ostrea edulis)</Emphasis> and its epibiotic succession

This study aimed to investigate intra- and inter-site differences in the epibiota on the European oyster Ostrea edulis of different ages and on hard substrata to assess their contribution to biodiversity. This research has shown that shells of O. edulis do show higher species diversity than non-living hard substrata and as oysters grow larger epibiotic diversity will increase. This investigation has revealed that O. edulis possesses biogenic engineering qualities and the value of O. edulis as a vehicle for increasing biodiversity should not be underestimated. Relatively few studies have examined the shell surfaces of Ostrea edulis, which, together with their associated epifauna provide a large portion of the natural hard substrata for sessile filter-feeding organisms, including oysters, in coastal and estuarine ecosystems. It can be considered a keystone species which has an influence on intertidal and subtidal community structures.     

A comparison of thermodynamic approaches to predict the adhesion of dairy microorganisms to solid substrata

Four different thermodynamic approaches were compared on their usefulness to predict correctly the adhesion of two fouling microorganisms from dairy processing to various solid substrata. The surface free energies of the interacting surfaces were derived from measured contact angles according to:

Thermodynamic aspects of cell spreading on solid substrata

To verify the validity of thermodynamic approaches to the prediction of cellular behavior, cell spreading of three different cell types on solid substrata was determined in vitro. Solid substrata as well as cell types were selected on the basis of their surface free energies, calculated from contact angle measurements. The surface free energies of the solid substrata ranged from 18–116 erg cm⁻². To measure contact angles on cells, a technique was developed in which a multilayer of cells was deposited on a filter and air dried. Cell surface free energies ranged from 60 erg cm⁻² for fibroblasts, and 57 for smooth muscle cells, to 91 for HeLa epithelial cells. After adsorption of serum proteins, cell surface free energies of all three cell types converged to approx 74 erg cm⁻². The spreading of these cell types from RPMI 1640 medium on the various solid substrata showed that both in the presence and in the absence of serum proteins in the medium, cells spread poorly on low energy substrata (Y _s <50 erg cm⁻²), whereas good cell spreading was observed on the higher energy substrata. Calculations of the interfacial free energy of adhesion (ΔF _adh) show that ΔF _adh decreases with increasingY _s , and equals zero around 45 erg cm⁻² for all three cell types in the presence of serum proteins and for HeLa epithelium cells in the absence of serum proteins. This explains the spreading of these cells on the various substrata upon a thermodynamic basis. The results clearly show that substratum surface free energy has a predictive value with respect to cell spreading in vitro, both in the presence and absence of serum proteins. It is noted, however, that interfacial thermodynamics fail to explain the behavior of fibroblasts and smooth muscle cells in the absence of serum proteins, most likely because of the relatively high surface charges of these two cell types.     

Antifouling potential of cyanobacteria: a mini-review

Abstract

Cyanobacteria produce a variety of bioactive metabolites that may have allelochemical functions in the natural environment, such as in the prevention of fouling by colonising organisms. Chemical compounds from cyanobacteria are also of biotechnological interest, especially for clinical applications, because of their antibiotic, algicidal, cytotoxic, immunosupressive and enzyme inhibiting activities. Cyanobacterial metabolites have the potential for use in antifouling technology, since they show antibacterial, antialgal, antifungal and antimacrofouling properties which could be expoited in the prevention of biofouling on man-made substrata in the aquatic environment. Molecules with antifouling activity represent a number of types including fatty acids, lipopeptides, amides, alkaloids, terpenoids, lactones, pyrroles and steroids. The isolation of biogenic compounds and the determination of their structure may provide leads for future development of, for example, environmentally friendly antifouling paints. An advantage of exploring the efficacy of cyanobacterial products is that the organisms can be grown in mass culture, which can be manipulated to achieve optimal production of bioactive substances. Phycotoxins and related products from cyanobacteria may serve as materials for antimicro- and antimacrofouling applications. A survey of antibiotic compounds with antifouling potential revealed more than 21 different antifouling substances from 27 strains of cyanobacteria.     

Spectral reflectances of three tiger beetle subspecies (Neocicindela perhispida): Correlations with their habitat substrate

Abstract

The coloration and cuticular reflec-tivity of the three subspecies of the tiger beetle Neocicindela perhispida, that occur along coastal beaches of the North Island of New Zealand, were examined. The hardened forewings (elytra) of all three subspecies exhibited colour patterns that matched the sand of their respective beach habitats. The dark N. p. campbelli, which occurs on black ironsand beaches, absorbed significantly higher amounts of solar radiation than N. p. giveni whose white elytra blended well with the white quartz sands on which it occurred. The mottled N. p. perhispida, which inhabits yellowish-brown beaches, exhibited reflectivities generally intermediate to these two extremes.     

Nutrients, algae and grazers in some British streams of contrasting pH

1. The relationship between algal biomass accumulation, invertebrate colonization, and stream-water pH was investigated in seven streams in three regions of England and Wales. Possible nutrient limitation of algal production at all sites was examined with diffusion substrata. 2. Periphyton assemblages on experimental substrata after 30 days were dominated by diatoms, notably Eunotia spp., at all sites. Algal pigment concentration (chlorophyll a and phaeopigments) was not correlated with stream-water pH, and mean concentrations on control (unenriched) substrata ranged from 0.08 to 1.94 μg cm^?2. 3. The growth response of periphyton to nutrient additions was site specific. Algal production was stimulated by nutrient additions at sites in the English Lake District and Llyn Brianne (south-west Wales), but not in the Ashdown Forest (southern England). 4. Larval Chironomidae were the main invertebrates retrieved from substrata at all sites. Within all three regions, larval abundance was positively related to algal pigment concentration (biomass). Abundance of the stonefly Nemurella pictetii was also positively correlated with algal biomass at the one site where it occurred. 5. Our results indicate that epilithic algal production in small, oligotrophic streams is unlikely to be determined primarily by pH. Neither do they support the view that an absence of grazers from acid streams is necessarily due to an inadequate food supply.     

Substratum/bacterial interactions and larval attachment: Films and exopolysaccharides of Halomonas marina (ATCC 25374) and their effect on barnacle cyprid larvae,Balanus amphitrite Darwin

Laboratory experiments were conducted to study the interaction between adhesion of the bacterium Halomonas marina to substrata of different wettabilities, the combination of which has been demonstrated to influence the attachment response of cyprid larvae of the barnacle Balanus amphitrite. Cyprid attachment in the presence of bacterial films was shown to be inhibited when films were on polystyrene but not on tissue‐culture polystyrene or glass. Using an enzyme‐linked lectin assay, bacteria on polystyrene showed an increase in binding of the lectin concanavalin A compared to bacteria on tissue‐culture treated polystyrene, indicating a difference in surface polymers associated with H. marina when attached to different substrata. Although bacterial growth supernatants when adsorbed to polystyrene were inhibitory to barnacle attachment, exopolysaccharides, to which the lectins may be binding, were not inhibitory. The data indicate that adhesion of films of bacteria to polystyrene alters the exopolymer production by H. marina and it is suggested that this change may be involved in the inhibition of cyprid attachment. However, the inhibition of cyprid larvae does not appear to be associated with the exopolysaccharides of the bacterium.     

Preliminary characterization of thin biofilms by optical microscopy

A simple non‐invasive technique has been used that employs conventional optical microscopy and a glass flow cell to observe biofilms formed on opaque thin substrata. The technique allows the roughness of the biofilm and the substratum to be evaluated, and the biofilm thickness to be easily measured. The biofilm density may be quantified through colour gradients. In addition, some details of biofilm growth processes like the formation of water channels and pores, and interactions between planktonic and sessile cells can be visualized. Results related to the development of thin biofilms and their response to the environment under different conditions are reported. Pure and mixed microbial cultures and different solid substrata were assessed.     

Influence of initial substratum surface tension on marine micro- and macro-fouling in the Gulf of Thailand

The density of five major groups of fouling organisms (bacteria, diatoms, choanoflagellates, ciliates, macroorganisms) on seven artificial substrata with surface tensions between 19.0 and 64.5 mN m⁻¹ was studied in the Gulf of Thailand. Two series of test panels of the different substrata were immersed into the sea between 3 hours and 64 days (macrofauna 128 days). The results show that surface tension has a limited impact on the density of the organisms. Only bacteria settled continuously in significantly lower numbers on materials within the minimum bioadhesive range (20–25 mN m⁻¹) than on other substrata. Significant differences between the substrata may disappear after long exposure, as in series 2 after 16 days. For diatoms and protozoa, a colonisation pattern similar to that of bacteria with a minimum of 20–25 mN m⁻¹ was detected after several exposure intervals. However, it was never recorded in more than 3 exposure intervals in a row. The colonisation pattern of macroorganisms could not be attributed to substratum surface tension. An index, called “colonisation degree” is introduced to give a general impression of the density of organisms on the materials tested. The colonisation degree did not show any significant difference at any exposure interval. The present results clearly suggest that substratum surface tension is easily overshadowed by other factors in colonisation processes under natural conditions. *** DIRECT SUPPORT *** A03B6037 00003     

Characterization of rhizospheric soil streptomycetes from Moroccan habitats and their antimicrobial activities

During an investigation on actinomycetes from rhizospheric soils from Moroccan habitats, 131 streptomycetes were recovered, morphologically characterized and assessed for their antimicrobial activity. Eleven isolates were characterized by the absence of an aerial mycelium. According to the colour of aerial mycelium, the rest were grouped into seven main classes, namely, grey, yellow, cream, white, green, red and polymorphic colours (pink, orange or violet). The grey colour class dominated (40%) and the red one was found only in rhizospheric soil of the Moroccan endemic plant Argania spinosa. About one third of the isolates (34%) produced soluble pigments of various colours and 14% produced melanoid pigments. Most of the isolates (83%) were active against one or more of the organisms tested (one gram-negative bacterium, three gram-positive bacteria, three yeasts and two filamentous fungi). Most antibiotic-producing isolates possess red and white colour. Strong antibiosis was exhibited against Streptomyces scabies, Staphylococcus aureus and Bacillus subtilis (75, 68 and 60% respectively), while only 14 and 8% of isolates displayed an activity against Escherichia coli and Verticillium dahliae respectively.     

Colour choices of naive bumble bees and their implications for colour perception

The innate preferences of inexperienced bumble bees, Bombus terrestris, for floral colour stimuli were studied using artificial flowers. The artificial flowers provided a colour pattern and consisted of a star-shaped corolla and of central colour patches similar to the nectar guide of natural flowers. The innate choice behaviour was assessed in terms of the number of approach flights from some distance towards the artificial flowers and the percentage of approach flights terminating in antennal contact with the floral guide. The colours of the floral guide, the corolla and the background were varied. It was shown that the innate flower colour preference in bumble bees has two components. 1. The frequency of approaches from a distance is correlated with the colour difference between the corolla and the background against which it is presented. If the corolla colour was constant but its background colour varied, the relative attractiveness of the corolla increased with its colour difference to the background. The colour difference assessment underlying this behaviour on a perceptual basis can be attained by means of colour opponent coding, a system well-established in Hymenoptera. 2. The frequency of antennal contacts with the floral guides relative to that of approach flights cannot be accounted for by colour opponent coding alone. Whether the approach flights are interrupted, or whether they end in an antennal contact with the nectar guide is strongly dependent on the direction (sign) of the colour difference, not only its magnitude. The choice behaviour requires a unique perceptual dimension, possibly that of colour saturation or that of hue perception comparable to components of colour perception in humans.     

The Effects of Seaweed Secondary Metabolites on Biofouling

Antifouling activity is one poorly investigated property of seaweed natural products. To determine, in the field, whether seaweeds contain chemicals able to influence the settlement of fouling organisms, crude organic extracts from Stypopodium zonale, Dictyota menstrualis (Phaeophyceae) and Laurencia obtusa (Rhodophyceae) were incorporated at natural volumetric concentrations, into hard stable gels that served as substrata for fouling in the experiments. Fouling organisms settled at a significantly higher rate on plates treated with S. zonale extracts than on control gels, while settlement was strongly inhibited on gels containing L. obtusa extracts. Fouling on gels treated with the D. menstrualis extract was not significantly different from the fouling found on control gels. The findings suggest that the broad antifouling properties of the crude extract of L. obtusa inhibit the settlement of fouling as well as hinder the development of settled fouling species, thereby reducing the richness of species. The results imply that L. obtusa possibly harbours powerful agents that can be explored for the development of antifouling technology.     

The Role of Substrate Type on Benthic Diatom Assemblages in the Daly and Roper Rivers of the Australian Wet/Dry Tropics

The selection of one or more river substrata for the collection of benthic diatoms is fundamental to any monitoring or research programme because it can potentially bias the diatom data set. In the wet/dry tropics of Australia, where the use of benthic diatoms for river health assessment is in its infancy, the comparability of diatom assemblages on river substrata has been assessed. Benthic diatoms were sampled from seven river sites, with a range of ionic chemistries (conductivities 27–6500 μS cm⁻¹) but low nutrient concentrations. At each site, triplicate samples were collected from 3 to 6 substrata. The diatom assemblages sampled were: epilithon (assemblages on rock), epiphytes on macroalgae and macrophytes, epidendron (assemblages on wood), epipsammon (assemblages on sand), epipelon (assemblages on mud) and bacterial slime. The variability between substrate assemblages, at each site, were assessed according to the following: (1) a multivariate analysis of diatom assemblages, (2) ANOVA tests of species richness, (3) ANOVA tests of the relative abundance of common species (defined by an abundance of at least 10% in any one sample), and (4) a comparison of the number of species unique to a substrate. A total of 198 taxa were identified, with some taxa common to temperate Australia. Common species were found on all substrata, with sometimes statistically significantly different relative abundances. Taxa unique to a substrate had low relative abundances (0.1–2%), were most often found on only one replicate, and are unlikely to be substrate specific because many are known to occur on other substrata. The assemblages on hard substrata, epilithon and epidendron, were found to be most similar. Diatom assemblages on macroalgal and macrophyte substrata, compared to other substrata, were highly variable. This is attributed to the loss of diatoms from grazing and sloughing, followed by recolonisation of newly exposed substrate. Other assemblages, notably epipsammon, were similar to epilithon and epidendron but sometimes differed in their relative abundance of common species. The principal finding of the study was the similarity of the epilithon and epidendron, which are considered to be indistinguishable. Rock and wood hard substrata can be substituted for one another during field surveys, thereby increasing the number of potential sample sites available for monitoring activities that standardise to a hard substrate.