Bacterial composition of biofilms formed on dairy-processing equipment

Abstract

Polymicrobial biofilms often form on the surfaces of food-processing machinery, causing equipment damage and posing a contamination risk for the foods processed by the system. The composition of the microbial communities that make up these biofilms is largely unknown, especially in the dairy industry. To address this deficit, we investigated the bacterial composition of biofilms that form on the surfaces of equipment during dairy processing using Illumina MiSeq sequencing and culture-dependent methods. Illumina sequencing identified eight phyla, comprising six classes, ten orders, fifteen families, eighteen genera, and eighteen species. In contrast, only eight species were isolated from the same samples using the culture-based method. To determine the ability of the identified bacteria to form biofilms, biofilm formation analysis via crystal violet staining was performed. Five of the eight culturable species, Acinetobacter baumannii, Acinetobacter junii, Enterococcus faecalis, Corynebacterium callunae, and Stenotrophomonas maltophilia, were able to form biofilms. Since most of the identified bacteria are potential food-borne or opportunistic pathogens, this study provides guidance for quality control of products produced in dairy processing facilities.     

An evaluation of biofilm development utilizing non‐destructive attenuated total reflectance Fourier transform infrared spectroscopy

Chemical changes that occur within a microbial biofilm during development on a germanium internal reflection element (IRE) were monitored by attenuated total reflection Fourier transform infrared spec‐troscopy (ATR/FT‐IR) for 188 h. The amount of protein detected at the IRE/medium interface increased throughout the course of the experiment. Extracellular polysaccharides were mainly produced during the initial stages of biofilm development. These results demonstrate that changes in metabolic activity of surface‐associated bacteria during biofilm development on surfaces exposed to a flowing bulk aqueous phase can be evaluated by ATR/FT‐IR.     

Bacterial biofilm on contact lenses and lens storage cases in wearers with microbial keratitis

Bacterial biofilm formation on contact lenses (CLs), and CL storage cases may be a risk factor for CL-associated corneal infection and may explain the persistence of organisms in CL storage cases. This study evaluated biofilm formation on, and microbial contamination of, CLs and CL storage cases from patients with microbial keratitis. Contact lenses and CL storage cases from 20 wearers with microbial keratitis were sampled microbiologically and visualized using scanning electron microscopy (SEM). Culture results from the cornea were also noted. Bacterial biofilm was present more frequently ( P < 0·05) on CL storage case surfaces (17/20) compared with CL surfaces (11/20) and biofilm density was significantly greater on case surfaces ( P < 0·05). There was no association between poor compliance and microbial contamination of the CL storage case, nor between poor compliance and biofilm formation or density on the CL or CL storage case. Biofilm formation occurred equally frequently with hydrogen peroxide and chlorine release care systems. Microbial keratitis in CL wearers is frequently associated with bacterial biofilm in the CL storage case. Despite the use of current CL disinfection systems, the CL storage case is a favourable environment for proliferation of certain organisms. Biofilm on CLs may prolong the retention time of organisms at the ocular surface and increase their potential pathogenicity.     

Biomaterials for orthopedics: anti-biofilm activity of a new bioactive glass coating on titanium implants

Abstract

This study evaluated adhesion and biofilm formation by Candida albicans, Pseudomonas aeruginosa and Staphylococcus epidermidis on surfaces of titanium (Ti) and titanium coated with F18 Bioactive Glass (BGF18). Biofilms were grown and the areas coated with biofilm were determined after 2, 4 and 8?h. Microscopy techniques were applied in order to visualize the structure of the mature biofilm and the extracellular matrix. On the BGF18 specimens, there was less biofilm formation by C. albicans and S. epidermidis after incubation for 8?h. For P. aeruginosa biofilm, a reduction was observed after incubation for 4?h, and it remained reduced after 8?h on BGF18 specimens. All biofilm matrices seemed to be thicker on BGF18 surface than on titanium surfaces. BGF18 showed significant anti-biofilm activity in comparison with Ti in the initial periods of biofilm formation; however, there was extensive biofilm after incubation for 48?h.     

Characterization of Candida albicans and Staphylococcus aureus polymicrobial biofilm on different surfaces

BackgroundStaphylococcus aureus and Candida albicans have been co-isolated from biofilm-associated diseases such as denture stomatitis, periodontitis, and burn wound infections, as well as from medical devices. However, the polymicrobial biofilm of both microorganisms has not been fully characterized.AimsTo characterize the polymicrobial biofilm of C. albicans and S. aureus in terms of microbial density, synergy, composition, structure, and stability against antimicrobials and chemical agents.MethodsCrystal violet assay was used to measure the biofilm formation. Scanning electron microscopy and confocal microscopy were used to analyze the structure and chemical composition of the biofilms, respectively.ResultsSupplemented media with fetal bovine serum (FBS) decreased the biofilm formation of S. aureus and the polymicrobial biofilm. For C. albicans, depending on the culture media, the addition of glucose or FBS had a positive effect in biofilm formation. FBS decreased the adhesion to polystyrene wells for both microorganisms. Supplementing the media with glucose and FBS enhanced the growth of C. albicans and S. aureus, respectively. It seems that C. albicans contributes the most to the adhesion process and to the general structure of the biofilms on all the surfaces tested, including a catheter model. Interestingly, S. aureus showed a great adhesion capacity to the surface of C. albicans in the biofilms. Proteins and β-1,6-linked polysaccharides seem to be the most important molecules in the polymicrobial biofilm.ConclusionsThe polymicrobial biofilm had a complex structure, with C. albicans serving as a scaffold where S. aureus adheres, preferentially to the hyphal form of the fungus. Detection of polymicrobial infections and characterization of biofilms will be necessary in the future to provide a better treatment.     

副溶血性弧菌-霍乱弧菌混合生物被膜形成过程研究

【目的】研究副溶血性弧菌(Vibrioparahaemolyticus,VP)和霍乱弧菌(Vibriocholera,VC)混合生物被膜的形成过程。【方法】在4、8、12、24、36、48、60、72 h测定单独条件下VP、VC及其混合后生物被膜的形成情况,通过结晶紫染色法、平板菌落计数法、测定胞外多糖、胞外蛋白,通过荧光原位杂交(FISH)观察混合生物被膜形成。【结果】虽然形成的混合生物被膜量介于VC和VP之间,但混合生物被膜在形成过程中,成熟期后生物被膜量的变化较小,对环境的抗性增强。混合生物被膜中拥有更多的活菌,混合生物被膜形成过程中胞外蛋白和胞外多糖的变化体现出其可能在对抵御不适应环境中起重要作用,通过FISH可观察到不同时期生物被膜的变化过程。【结论】VC与VP共同形成生物被膜的过程中,混合生物被膜总量虽然减少,但混合生物被膜中拥有更多的活菌,这可能引起更大的危害。研究混合生物被膜形成过程中被膜的变化,可为有害生物被膜的控制提供基础。     

Utilisation of a packed-bed biofilm reactor for the determination of the potential of biofilm accumulation in water systems

Abstract

An experimental system has been developed that allows the monitoring of biofilm development on supports exposed to water of different characteristics. The system consists of a series of packed-bed reactors filled with glass beads, and by periodically removing biofilm attached to these beads for off-line analyses this provides a means for monitoring biofilm development. Despite its reduced dimensions (6.9 cm long and 1.58 cm in diameter), the experimental system used has a sampling surface of 90.3 cm² (including only the surface of the glass beads). This allows reproducible and representative samples to be taken from different water systems, providing a reliable and economic method for evaluating in situ the formation of biofilms from different environments. The set-up of the entire experimental system was constructed to meet the demands of field experiments in a well-defined hydrodynamic environment and to allow easy removal of samples for biomass quantification and microscopic observation. Data obtained using this device can be used as an indicator of the risk of biofilm formation in different water systems. This indicator, “the biofilm accumulation potential”, represents an effective and representative tool for the monitoring of biofilm development in an integrated antifouling strategy, in order to help keep biofouling, scaling and microbial risks under control. According to the experiments with the packed-bed reactors used with a high flow regime, the ratio TCN/HPC could provide an indication of the state of the biofilm, and lower ratios could indicate a higher biofilm accumulation potential.     

The Use of Cellulase in Inhibiting Biofilm Formation from Organisms Commonly Found on Medical Implants

A study was made of the use of cellulase to inhibit biofilm formation by a pathogenic bacterium commonly found in medical implants. A Pseudomonas aeruginosa biofilm was grown on glass slides in a parallel flow chamber for 4 d with glucose as the nutrient source. Biofilm development was assessed by measuring the colony forming units (CFU) and biomass areal density. Biofilm was grown at pH 5 and 7 in the presence of three different cellulase concentrations, 9.4, 37.6 and 75.2 units ml^{m 1}. In addition, a control study using deactivated cellulase was performed. The results show that cellulase is effective in partially inhibiting biomass and CFU formation by P. aeruginosa on glass surfaces. The effect of cellulase depended on concentration and was more effective at pH 5 than pH 7. The experiment was further extended by investigating the effect of cellulase on the apparent molecular weight of purified P. aeruginosa exopolysaccharides (EPS). The observation of EPS using size exclusion chromatography showed a decrease in apparent molecular weight when incubated with enzyme. An increase in the amount of reducing sugar with time when the purified EPS were incubated with enzyme also supports the hypothesis that cellulase degrades the EPS of P. aeruginosa. While cellulase does not provide total inhibition of biofilm formation, it is possible that the enzyme could be used in combination with other treatments or in combinations with other enzymes to increase effectiveness.     

Biofilm retention on surfaces with variable roughness and hydrophobicity

Biofilms on food processing equipment cause food spoilage and pose a hazard to consumers. The bacterial community on steel surfaces in a butcher's shop was characterized, and bacteria representative of this community enriched from minced pork were used to study biofilm retention. Stainless steel (SS) was compared to two novel nanostructured sol-gel coatings with differing hydrophobicity. Surfaces were characterized with respect to roughness, hydrophobicity, protein adsorption, biofilm retention, and community composition of the retained bacteria. Fewer bacteria were retained on the sol-gel coated surfaces compared to the rougher SS. However, the two sol-gel coatings did not differ in either protein adsorption, biofilm retention, or microbial community composition. When polished to a roughness similar to sol-gel, the SS was colonized by the same amount of bacteria as the sol-gel, but the bacterial community contained fewer Pseudomonas cells. In conclusion, biofilm retention was affected more by surface roughness than chemical composition under the condition described in this study.     

Characterization of polymicrobial biofilms obtained from saliva or carious lesions in dentin

Abstract

This study aimed to compare the formation of polymicrobial biofilms using carious dentin or saliva as inoculum for application in in vitro microbiological studies on caries research. For biofilm growth, combined samples of infected dentin or saliva from three donors were used. The biofilms were grown on glass coverslips, under a regimen of intermittent exposure (6?h day^?1) to 1% sucrose for 4?days. Total bacterial loads, as well as specific aciduric bacteria and mutans streptococci loads were quantified and correlated with biofilm acidogenicity and susceptibility to chlorhexidine. The data were evaluated using the Student’s-t, Mann Whitney and Kruskal-Wallis tests. The two biofilms showed similar microbial loads (total bacteria, aciduric bacteria and mutans streptococci) on day 4, and high acidogenicity after 48?h and were susceptible to chlorhexidine at different time intervals. In conclusion, both dentin and saliva can be used as an inoculum in in vitro studies of processes related to biofilm formation.     

Alumina surfaces with nanoscale topography reduce attachment and biofilm formation by Escherichia coli and Listeria spp.

This work reports on a simple, robust and scientifically sound method to develop surfaces able to reduce microbial attachment and biofilm development, with possible applications in medicine, dentistry, food processing, or water treatment. Anodic surfaces with cylindrical nanopores 15 to 100 nm in diameter were manufactured and incubated with Escherichia coli ATCC 25922 and Listeria innocua. Surfaces with 15 and 25 nm pore diameters significantly repressed attachment and biofilm formation. Surface–bacteria interaction forces calculated using the extended Derjaguin Landau Verwey-Overbeek (XDLVO) theory indicate that reduction in attachment and biofilm formation is due to a synergy between electrostatic repulsion and surface effective free energy. An attachment study using E. coli K12 strains unable to express appendages also suggests that the small-pore surfaces may inhibit flagella-dependent attachment. These results can have immediate, far-reaching implications and commercial applications, with substantial benefits for human health and life.     

The influence of chlorination timing and concentration on microbial communities in labyrinth channels: implications for biofilm removal

Chlorination is an effective method to control biofilm formation in enclosed pipelines. To date, very little is known about how to control biofilms at the mesoscale in complex pipelines through chlorination. In this study, the dynamic of microbial communities was examined under different residual chlorine concentrations on the biofilms attached to labyrinth channels for drip irrigation using reclaimed water. The results indicated that the microbial phospholipid fatty acids, extracellular polymeric substances, microbial dynamics, and the ace and Shannon microbial diversity indices showed a gradual decrease after chlorination. However, chlorination increased microbial activity by 0.5–19.2%. The increase in the relative abundances of chloride-resistant bacteria (Acinetobacter and Thermomonas) could lead to a potential risk of chlorine resistance. Thus, keeping a low chlorine concentration (0.83?mg l^?1 for 3?h) is effective for controlling biofilm formation in the labyrinth channels.     

Potential mechanisms for the effects of tea extracts on the attachment,biofilm formation and cell size of Streptococcus mutans

Tea can inhibit the attachment of Streptococcus mutans to surfaces and subsequent biofilm formation. Five commercial tea extracts were screened for their ability to inhibit attachment and biofilm formation by two strains of S. mutans on glass and hydroxyapatite surfaces. The mechanisms of these effects were investigated using scanning electron microscopy (SEM) and phytochemical screening. The results indicated that extracts of oolong tea most effectively inhibited attachment and extracts of pu-erh tea most effectively inhibited biofilm formation. SEM images showed that the S. mutans cells treated with extracts of oolong tea, or grown in medium containing extracts of pu-erh tea, were coated with tea components and were larger with more rounded shapes. The coatings on the cells consisted of flavonoids, tannins and indolic compounds. The ratio of tannins to simple phenolics in each of the coating samples was ～3:1. This study suggests potential mechanisms by which tea components may inhibit the attachment and subsequent biofilm formation of S. mutans on tooth surfaces, such as modification of cell surface properties and blocking of the activity of proteins and the structures used by the bacteria to interact with surfaces.     

Development of a multispecies periodontal biofilm model within a stirred bioreactor

Abstract

The objective of this work was to develop a subgingival biofilm model using a stirred bioreactor. Discs of bovine teeth were adapted to a stirred bioreactor filled with a culture medium containing bacterial species associated with periodontal health or disease. After anaerobic incubation, the biofilms growing on the substratum surfaces were collected and analyzed. The mean number of Colony-forming Units (CFUs) varied, but with no difference between 3 and 7?days of biofilm formation (p?>?0.05). Scanning Electron Microscopy (SEM) analysis showed a uniform biofilm layer covering the cement layer of the root surface containing bacteria with diverse morphology. In checkerboard DNA-DNA hybridization, bacterial species were identified in both biofilms. In conclusion, a subgingival biofilm model was developed using a stirred bioreactor, allowing the in vitro reproduction of complex microbial communities. This is an advanced model that may be useful to mimic complex clinical periodontal biofilms.     

Biofilm formation by the yeast Rhodotorula mucilaginosa: process,repeatability and cell attachment in a continuous biofilm reactor

Yeast biofilms contribute to quality impairment of industrial processes and also play an important role in clinical infections. Little is known about biofilm formation and their treatment. The aim of this study was to establish a multi-layer yeast biofilm model using a modified 3.7 l bench-top bioreactor operated in continuous mode (D = 0.12 h^?1). The repeatability of biofilm formation was tested by comparing five bioprocesses with Rhodotorula mucilaginosa, a strain isolated from washing machines. The amount of biofilm formed after 6 days post inoculation was 83 μg cm^?2 protein, 197 μg cm^?2 polysaccharide and 6.9 × 10⁶ CFU cm^?2 on smooth polypropylene surfaces. Roughening the surface doubled the amount of biofilm but also increased its spatial variability. Plasma modification of polypropylene significantly reduced the hydrophobicity but did not enhance cell attachment. The biofilm formed on polypropylene coupons could be used for sanitation studies.     

Continuous flow system for biofilm formation using controlled concentrations of Pseudomonas putida from chicken carcass and coupled to electrochemical impedance detection

Abstract

Most studies dealing with monitoring the dynamics of biofilm formation use microbial suspensions at high concentrations. These conditions do not always represent food or water distribution systems. A continuous flow system capable of controlling the concentration of the microbial suspension stream from 10⁴ to 10⁶ CFU ml^?1 is reported. Pseudomonas putida biofilms formed using 100-fold, 1,000-fold or 10,000-fold diluted bacterial suspensions were monitored in-line by electrochemical impedance spectroscopy (EIS) and total plate counts. Randles equivalent circuit model and a modified Randles model with biofilm elements were used to fit the EIS data. In Randles equivalent circuit, the charge transfer resistance decreased as the biofilm formed. The log colony counts of the biofilm correlated to the charge transfer resistance. In the biofilm model, the biofilm resistance and the double layer capacitance decreased as the biofilm formed. The log colony counts of the biofilm correlated to the biofilm resistance.     

Microbial population dynamics and proteomics in membrane bioreactors with enzymatic quorum quenching

Quorum sensing gives rise to biofilm formation on the membrane surface, which in turn causes a loss of water permeability in membrane bioreactors (MBRs) for wastewater treatment. Enzymatic quorum quenching was reported to successfully inhibit the formation of biofilm in MBRs through the decomposition of signal molecules, N-acyl homoserine lactones (AHLs). The aim of this study was to elucidate the mechanisms of quorum quenching in more detail in terms of microbial population dynamics and proteomics. Microbial communities in MBRs with and without a quorum quenching enzyme (acylase) were analyzed using pyrosequencing and compared with each other. In the quorum quenching MBR, the rate of transmembrane pressure (TMP) rise-up was delayed substantially, and the proportion of quorum sensing bacteria with AHL-like autoinducers (such as Enterobacter, Pseudomonas, and Acinetobacter) also decreased in the entire microbial community of mature biofilm in comparison to that in the control MBR. These factors were attributed to the lower production of extracellular polymeric substances (EPS), which are known to play a key role in the formation of biofilm. Proteomic analysis using the Enterobacter cancerogenus strain ATCC 35316 demonstrates the possible depression of protein expression related to microbial attachments to solid surfaces (outer membrane protein, flagellin) and the agglomeration of microorganisms (ATP synthase beta subunit) with the enzymatic quorum quenching. It has been argued that changes in the microbial population, EPS and proteins via enzymatic quorum quenching could inhibit the formation of biofilm, resulting in less biofouling in the quorum quenching MBR.     

Virtual screening of LPXTG competitive SrtA inhibitors targeting signal transduction mechanism in Bacillus anthracis: a combined experimental and theoretical study

Abstract

Members of the sortase enzyme super family decorate the surfaces of Bacillus anthracis cell wall with proteins that play key roles in microbial pathogenesis and its biofilm formation. Bacillus anthracis Sortase-A (Ba-SrtA) is a potential target for new therapeutics as it is required for B. anthracis survival and replication within macrophages. An understanding of the binding site pocket and substrate recognition mechanism by SrtA enzymes may serve to be beneficial in the rational development of sortase inhibitors. Here, the LPXTG signal peptide-based competitive inhibitors are screened against the Ba-SrtA and compounds with reasonable inhibition, specificity, and mechanisms of inactivation of SrtA have been covered. The screened compounds are experimentally validated against the phylogenetically similar Gram-positive pathogen B. cereus. In situ microscopic visualizations suggest that these screened compounds showed the microbial and biofilm inhibitory activity against B. cereus. It facilitates the further development of these molecules into useful anti-infective agents to treat infections caused by B. anthracis and other Gram-positive pathogens. These results provide insight into basic design principles for generating new clinically relevant lead molecules. It also provides an alternative strategy where a screened ligand molecule can be used in combination to battle increasingly against the Gram-positive pathogens.     

Antibacterial isoeugenol coating on stainless steel and polyethylene surfaces prevents biofilm growth

Aims

Pathogenic bacteria can spread between individuals or between food items via the surfaces they share. Limiting the survival of pathogens on surfaces, therefore, presents an opportunity to limit at least one route of how pathogens spread. In this study, we propose that a simple coating with the essential oil isoeugenol can be used to circumvent the problem of bacterial transfer via surfaces.

Methods and Results

Two commonly used materials, stainless steel and polyethylene, were coated by physical adsorption, and the coatings were characterized by Raman spectroscopy, atomic force microscopy and water contact angle measurements. We quantified and visualized the colonization of coated and uncoated surfaces by three bacteria: Staphylococcus aureus, Listeria monocytogenes and Pseudomonas fluorescens. No viable cells were detected on surfaces coated with isoeugenol.

Conclusions

The isoeugenol coating prepared with simple adsorption proved effective in preventing biofilm formation on stainless steel and polyethylene surfaces. The result was caused by the antibacterial effect of isoeugenol, as the coating did not diminish the adhesive properties of the surface.

Significance and Impact of the Study

Our study demonstrates that a simple isoeugenol coating can prevent biofilm formation of S. aureus, L. monocytogenes and P. fluorescens on two commonly used surfaces.     

Chlorination-mediated EPS excretion shapes early-stage biofilm formation in drinking water systems

Microbial surface adhesion to surfaces and subsequent biofilm establishment are ubiquitous in drinking water systems, which often contribute to deteriorated water quality. Disinfectants are common agents applied to drinking water controlling microbial propagation, yet the underlying mechanisms of how disinfectants function to regulate microbial activity and thereby biofilm development remains elusive. We experimentally studied the effects of chlorination on extracellular polymeric substance (EPS) production, and its impacts on early-stage biofilm formation in a model drinking water system. Results showed that low-level chlorine (≤ 1.0 mg/L) stimulated microbial EPS (especially of proteins) excretion that favored early-stage biofilm formation. Microbes experiencing higher chlorination (>1.0 mg/L) exhibited clearly suppressed growth associated with reduced EPS release, consequently yielding less biofilm formation. Removal of cell-attached proteins and polysaccharides diminished biofilm formation, which highlighted the critical role of EPS (especially protein components) in biofilm development. A negative correlation between chlorination-mediated microbial protein production and cell surface charge suggested that chlorine disinfection may modify cell surface properties through regulation of microbial EPS excretion and thereby mediate biofilm formation. With these quantitative estimations, this study provides novel insights into how chlorination-mediated EPS excretion shapes early-stage biofilm formation, which is essential for practical functioning of drinking water systems.