Anomalous settlement behavior of Ulva linza zoospores on cationic oligopeptide surfaces

Identification of settlement cues for marine fouling organisms opens up new strategies and methods for biofouling prevention, and enables the development of more effective antifouling materials. To this end, the settlement behaviour of zoospores of the green alga Ulva linza onto cationic oligopeptide self-assembled monolayers (SAMs) has been investigated. The spores interact strongly with lysine- and arginine-rich SAMs, and their settlement appears to be stimulated by these surfaces. Of particular interest is an arginine-rich oligopeptide, which is effective in attracting spores to the surface, but in a way which leaves a large fraction of the settled spores attached to the surface in an anomalous fashion. These 'pseudo-settled' spores are relatively easily detached from the surface and do not undergo the full range of cellular responses associated with normal commitment to settlement. This is a hitherto undocumented mode of settlement, and surface dilution of the arginine-rich peptide with a neutral triglycine peptide demonstrates that both normal and anomalous settlement is proportional to the surface density of the arginine-rich peptide. The settlement experiments are complemented with physical studies of the oligopeptide SAMs, before and after extended immersion in artificial seawater, using infrared spectroscopy, null ellipsometry and contact angle measurements.     

Use of Self-Assembled Monolayers of Different Wettabilities To Study Surface Selection and Primary Adhesion Processes of Green Algal (Enteromorpha) Zoospores

We investigated surface selection and adhesion of motile zoospores of a green, macrofouling alga (Enteromorpha) to self-assembled monolayers (SAMs) having a range of wettabilities. The SAMs were formed from alkyl thiols terminated with methyl (CH₃) or hydroxyl (OH) groups or mixtures of CH₃- and OH-terminated alkyl thiols and were characterized by measuring the advancing contact angles and by X-ray photoelectron spectroscopy. There was a positive correlation between the number of spores that attached to the SAMs and increasing contact angle (hydrophobicity). Moreover, the sizes of the spore groups (adjacent spores touching) were larger on the hydrophobic SAMs. Video microscopy of a patterned arrangement of SAMs showed that more zoospores were engaged in swimming and “searching” above the hydrophobic sectors than above the hydrophilic sectors, suggesting that the cells were able to “sense” that the hydrophobic surfaces were more favorable for settlement. The results are discussed in relation to the attachment of microorganisms to substrata having different wettabilities.     

Use of self-assembled monolayers of different wettabilities to study surface selection and primary adhesion processes of green algal (Enteromorpha) zoospores

We investigated surface selection and adhesion of motile zoospores of a green, macrofouling alga (Enteromorpha) to self-assembled monolayers (SAMs) having a range of wettabilities. The SAMs were formed from alkyl thiols terminated with methyl (CH(3)) or hydroxyl (OH) groups or mixtures of CH(3)- and OH-terminated alkyl thiols and were characterized by measuring the advancing contact angles and by X-ray photoelectron spectroscopy. There was a positive correlation between the number of spores that attached to the SAMs and increasing contact angle (hydrophobicity). Moreover, the sizes of the spore groups (adjacent spores touching) were larger on the hydrophobic SAMs. Video microscopy of a patterned arrangement of SAMs showed that more zoospores were engaged in swimming and "searching" above the hydrophobic sectors than above the hydrophilic sectors, suggesting that the cells were able to "sense" that the hydrophobic surfaces were more favorable for settlement. The results are discussed in relation to the attachment of microorganisms to substrata having different wettabilities.     

A model that predicts the attachment behavior of Ulva linza zoospores on surface topography

A predictive model for the attachment of spores of the green alga Ulva on patterned topographical surfaces was developed using a constant refinement approach. This ‘attachment model’ incorporated two historical data sets and a modified version of the previously-described Engineered Roughness Index. Two sets of newly-designed surfaces were used to evaluate the effect of two components of the model on spore settlement. Spores attached in fewer numbers when the area fraction of feature tops increased or when the number of distinct features in the design increased, as predicted by the model. The model correctly predicted the spore attachment density on three previously-untested surfaces relative to a smooth surface. The two historical data sets and two new data sets showed high correlation (R ² = 0.88) with the model. This model may be useful for designing new antifouling topographies.     

Characterization of spore surfaces from a Geobacillus sp. isolate by pH dependence of surface charge and infrared spectra

Aims: The surfaces of spores from a Geobacillus sp. isolated from a milk powder production line were examined to obtain fundamental information relevant to bacterial spore adhesion to materials. Materials and Results: The surfaces of spores were characterized using transmission electron microscopy and infrared spectroscopy. Thin sections of spores stained with ruthenium red revealed an exosporium with a hair‐like nap around the spores. Attenuated total reflection infrared spectra of the spores exposed to different pH solutions on a ZnSe prism revealed that pH‐sensitive carboxyl and phosphodiester groups associated with proteins and polysaccharides contributed to the spore’s negative charge which was revealed by our previous zeta potential measurements on the spores. Lowering the pH to the isoelectric point of spores resulted in an increase in intensity of all spectral bands, indicating that the spores moved closer to the zinc selenide (ZnSe) surface as the charged surface groups were neutralized and the spore surface polymers compressed. The attachment of spores to stainless steel was threefold higher at pH 3 compared with pH 7. Conclusions: This research showed that spore attachment to surfaces is influenced by electrostatic interactions, surface polymer conformation and associated steric interactions. Significance and Impact of the Study: The adhesion of thermophilic spores is largely controlled by functional groups of surface polymers and polymer conformation.     

Treatment with chlorous acid to inhibit spores of Alicyclobacillus acidoterrestris in aqueous suspension and on apples

Aim: To test the efficacy of a chemical (chlorous acid) for reducing the numbers of viable Alicyclobacillus acidoterrestris spores in laboratory media and on apples. Methods and Results: Alicyclobacillus acidoterrestris spores in aqueous suspension and on apple surfaces of four different cultivars were treated with 268 ppm chlorous acid. Treatment with 268 ppm chlorous acid sharply reduced the numbers of spores of A. acidoterrestris in laboratory media by 1·6, 4·3, and 7·0 log₁₀ reductions for 5, 10, and 15 min treatments, respectively. Chlorous acid also effectively reduced the spore load on apple surfaces. Alicyclobacillus acidoterrestris spore counts were significantly reduced by about 5 log₁₀ after 10 min treatment on four different apple cultivars (‘Red Delicious’, ‘Golden Delicious’,’ Gala’, and ‘Fuji’). There was no synergistic effect on spore reduction when chlorous acid treatment was combined with heat. Conclusions: These results show that chlorous acid is highly efficacious against A. acidoterrestris spores on apple surfaces. Significance and Impact of the Study: Chlorous acid can be used as an alternative sanitizer of chlorine to control a major A. acidoterrestris contamination source in juice processing plants.     

Summer airborne mycoflora of Timişoara (Romania) and relationship to meteorological parameters

The present aeromycological investigation was undertaken to study atmospheric fungal spores in Timi?oara (western Romania). This study was carried out using a Hirst type volumetric sampler. The study revealed the existence of a rich airborne mycoflora. The atmospheric fungal spores were classified and evaluated into three groups (‘major’, ‘minor’ and ‘sporadic’) depending upon their catch percentage in the air. Cladosporium/Fusarium/Leptosphaeria-group, Alternaria, Helminthosporium airborne fungal spores and airborne fungal fragments regularly recorded (frequency 100% of days). Cladosporium accounted for 81.09% of the outdoor fungal spores. The airborne fungal fragments have been identified as abundant in our geographic area. Spearman’s correlations were applied to meteorological parameters and airborne fungal spore concentrations. In addition, correlations were calculated between the fungal spore concentrations and the meteorological variables from the previous day. A total of eleven weather factors were selected for this investigation. Following Spearman’s correlations, I identified two patterns of behaviour: most of the airborne fungal spores prefer cloudiness, lower near-surface soil temperature, lower atmospheric pressure, higher relative humidity and precipitation (pattern A) while other spore concentrations favour increased sunshine, higher near-surface soil temperature and dry conditions (pattern B). The behaviour of some fungal spores during the warm season has proven unclear (pattern C). This study demonstrates the need for investigations throughout the year and the evaluation with complementary statistical methods, regarding the correct interpretation of airborne mycoflora relationships with meteorological parameters.     

The spore‐associated protein BclA1 affects the susceptibility of animals to colonization and infection by Clostridium difficile

The BclA protein is a major component of the outermost layer of spores of a number of bacterial species and Clostridium difficile carries three bclA genes. Using insertional mutagenesis each gene was characterized and spores devoid of these proteins had surface aberrations, reduced hydrophobicity and germinated faster than wild‐type spores. Therefore the BclA proteins were likely major components of the spore surface and when absent impaired the protective shield effect of this outermost layer. Analysis of infection and colonization in mice and hamsters revealed that the 50% infectious dose (ID₅₀) of spores was significantly higher (2‐logs) in the bclA1^? mutant compared to the isogenic wild‐type control, but that levels of toxins (A and B) were indistinguishable from animals dosed with wild‐type spores. bclA1^? spores germinated faster than wild‐type spores yet mice were less susceptible to infection suggesting that BclA1 must play a key role in the initial (i.e. pre‐spore germination) stages of infection. We also show that the ID₅₀ was higher in mice infected with R20291, a ‘hypervirulent’ 027 strain, that carries a truncated BclA1 protein.     

Engineered antifouling microtopographies: mapping preferential and inhibitory microenvironments for zoospore attachment

An algorithm was developed and implemented to map the locations of attached spores of Ulva linza on patterned surfaces. Using this mapping algorithm, spore preference among regions within a pattern can be detected and quantified. Settlement maps of spores on patterned topographies from several assays showed clear preferences in spore settlement. Over 94% of the spores attached within the depressed regions on the surfaces, including a surface containing pits instead of protruding features. The spores attached primarily at the intersections of several features, with over half and up to 96% of spores settling in these regions. The highest spore densities occurred at intersections where the features were most dissimilar. In contrast, the location of attached beads on the surfaces was nearly uniform across the surface. Identification of preferential attachment locations allows for the study of localized properties that influence cell behavior and aids in the development of new surfaces to control cell–surface interactions.     

A New Antifouling Bioassay Monitoring Brown Algal Spore Swimming Behaviour in the Presence of Echinoderm Extracts

Epibiosis, the colonization of biogenic surfaces by epibiotic organisms such as bacteria, filamentous algae, and sessile invertebrates, poses a major threat to the fitness and survival of macroorganisms which could potentially be fouled. Fouling of artificial submerged structures can also cause severe economic problems, making the need for refined bioassays to determine the efficacy of potential antifouling compounds even more important. The aim of this study was to use the distinct swimming behaviour of zoospores of the fouling brown alga Hincksia irregularis to develop a new laboratory antifouling bioassay to test the effect of marine natural products. Spores were exposed to different concentrations of aqueous and organic extracts from body walls of sympatric echinoderms (Asteroidea: Luidia clathrata, Astropecten articulatus; Ophiuroidea: Astrocyclus caecilia). Computer-assisted motion analysis was used to distinguish between the straight and fast swimming movements of undisturbed spores (controls) and the helical and erratic swimming patterns of chemically irritated spores, using the quantitative parameters rate of direction change (RCD) and swimming speed (SPD). The ratio RCD/SPD of spore swimming paths at extract treatments compared to controls can be used to quantify the detrimental effect of echinoderm extracts. Echinoderm extracts had significant effects on spore swimming behaviour at concentrations three orders of magnitude lower than that present naturally in the echinoderm body walls (mg extract/dry weight echinoderm body wall). Comparative studies on spore settlement and germination under similar treatment conditions show that changes in spore swimming behaviour reflect decreased fitness and survivourship of algal spores. It is suggested that this bioassay can be used to screen potential antifouling extracts and compounds at very low concentrations, making this assay particularly suitable for detection of concentration dependent effects and for bioassay-guided fractionation of extracts to identify active compounds.     

Seasonal and Diurnal Variation of Airborne Basidiomycete Spore Concentrations in Mexico City

Seasonal and diurnal changes in concentrations of airborne basidiomycete spores (basidiospores, rusts, smuts) were studied, using Burkard volumetric spore traps, in two areas of Mexico City with different degrees of urbanization and related to changes in climatic variables through 1991. Basidiomycete spores formed a large component of the total airborne fungal spore load in the atmosphere of Mexico City. They were the second most abundant spore type after Deuteromycotina (Hyphomycetes), forming 32% of the total fungal spores trapped in an urban-residential area and 28% in an urban-commercial area. The most abundant basidiomycete spores were basidiospores although smut-type spores were trapped on more days than basidiospores and rusts on fewer. Basidiospores occurred in concentrations up to 2,000 spores m-3 in the urban-residential area. Basidiospores showed a marked seasonal distribution, especially in the southern area, with their greatest abundance during the wet season. The correlation coefficients associated with regressions between basidiospore concentration and some environmental factors were increased when a lag period of 2 to 4 days was used between environmental measurements and the day of spore collection. Basidiospore concentrations exceeded the 75 percentile concentration (>400 spores m^-3) most often when rainfall was up to 6 mm and relative humidity was >70%. Basidiospores showed a diurnal periodicity with greatest concentrations in the early morning. The most common basidiospore type was Coprinus which formed 67% of basidiospores trapped in the southern area and 63% in the central area. Smut spores were trapped on 87% of days through the year while rust spores occurred in only 35%. Both rusts and smuts were present in only small concentrations.     

The ExsA protein of Bacillus cereus is required for assembly of coat and exosporium onto the spore surface

The outermost layer of spores of the Bacillus cereus family is a loose structure known as the exosporium. Spores of a library of Tn917-LTV1 transposon insertion mutants of B. cereus ATCC 10876 were partitioned into hexadecane; a less hydrophobic mutant that was isolated contained an insertion in the exsA promoter region. ExsA is the equivalent of SafA (YrbA) of Bacillus subtilis, which is also implicated in spore coat assembly; the gene organizations around both are identical, and both proteins contain a very conserved N-terminal cortex-binding domain of ca. 50 residues, although the rest of the sequence is much less conserved. In particular, unlike SafA, the ExsA protein contains multiple tandem oligopeptide repeats and is therefore likely to have an extended structure. The exsA gene is expressed in the mother cell during sporulation. Spores of an exsA mutant are extremely permeable to lysozyme and are blocked in late stages of germination, which require coat-associated functions. Two mutants expressing differently truncated versions of ExsA were constructed, and they showed the same gross defects in the attachment of exosporium and spore coat layers. The protein profile of the residual exosporium harvested from spores of the three mutants--two expressing truncated proteins and the mutant with the original transposon insertion in the promoter region--showed some differences from the wild type and from each other, but the major exosporium glycoproteins were retained. The exsA gene is extremely important for the normal assembly and anchoring of both the spore coat and exosporium layers in spores of B. cereus.     

Antifouling properties of oligo(lactose)-based self-assembled monolayers

The antifouling (AF) properties of oligo(lactose)-based self-assembled monolayers (SAMs), using four different proteins, zoospores of the green alga Ulva linza and cells of the diatom Navicula incerta, were investigated. The SAM-forming alkylthiols, which contained 1, 2 or 3 lactose units, showed significant variation in AF properties, with no differences in wettability. Non-specific adsorption of albumin and pepsin was low on all surfaces. Adsorption of lysozyme and fibrinogen decreased with increasing number of lactose units in the SAM, in agreement with the generally observed phenomenon that thicker hydrated layers provide higher barriers to protein adsorption. Settlement of spores of U. linza followed an opposite trend, being greater on the bulkier, more hydrated SAMs. These SAMs are more ordered for the larger saccharide units, and it is therefore hypothesized that the degree of order, and differences in crystallinity or stiffness between the surfaces, is an important parameter regulating spore settlement on these surfaces.     

Perpetuation of Cherry Leaf Spot Disease in Ornamental Cherry

Cherry leaf spot disease, caused by Blumeriella jaapii (Rehm) Arx., is an increasing concern to nursery producers of ornamental cherry in the south‐eastern United States. Spores were trapped starting in late March before symptoms were observed in the field, which indicates that leaf debris from diseased trees are an important source of primary inoculum. Previously infected trees of six cultivars (‘Kwanzan’, ‘Yoshino’, ‘Okami’, ‘Snowgoose’, ‘Autumnalis’ and ‘Akebono’), which were overwintered in a controlled environment protected from airborne spores, developed disease symptoms in late spring, indicating that dormant buds may also be a source of primary inoculum. Because ornamental cherry trees are propagated by budding and cuttings, disease management should incorporate cultural practices that focus on propagation from disease‐free trees and fungicide applications beginning at petal drop to protect emerging leaves.     

The physico-chemical characterization of casein-modified surfaces and their influence on the adhesion of spores from a Geobacillus species

To gain a better understanding of the factors influencing spore adhesion in dairy manufacturing plants, casein-modified glass surfaces were prepared and characterized and their effect on the adhesion kinetics of spores from a Geobacillus sp., isolated from a dairy manufacturing plant (DMP) was assessed using a flow chamber. Surfaces were produced by initially silanizing glass using (3-glycidyloxypropyl) trimethoxysilane (GPS) or (3-aminopropyl) triethoxysilane to form epoxy-functionalized (G-GPS) or amino-functionalized glass (G-NH₂) substrata. Casein was grafted to the G-GPS directly by its primary amino groups (G-GPS-casein) or to G-NH₂ by employing glutaraldehyde as a linking agent (G-NH₂-glutar-casein). The surfaces were characterised using streaming potential measurements, contact angle goniometry, infrared spectroscopy and scanning electron microscopy. The attachment rate of spores suspended in 0.1 M KCl at pH 6.8, was highest on the positively charged (+14 mV) G-NH₂ surface (333 spores cm^?2 s^?1) compared to the negatively charged glass (?22 mV), G-GPS (?20 mV) or G-GPS-casein (?21 mV) surfaces (162, 17 or 6 spores cm^?2 s^?1 respectively). Whilst there was a clear decrease in attachment rate to negatively charged casein-modified surfaces compared to the positively charged amine surface, there was no clear relationship between surface hydrophobicity and spore attachment rate.     

Fitting the negative binomial distribution to Pasteuria penetrans spore attachment on root-knot nematodes and predicting probability of spore attachments using a Markov chain model

Pasteuria penetrans controls root-knot nematodes (Meloidogyne spp.) either by preventing invasion or by causing female sterility. The greatest control of P. penetrans occurred when an appropriate quantity of P. penetrans spores attached to the cuticle of a juvenile nematode. The number of spores attaching to juveniles within a given time increased with increasing the time of exposure to spores. Based on this, numbers of encumbered nematodes were recorded 1, 3, 6 and 9 h after placing nematodes in standard P. penetrans spore suspensions. From the count data obtained, P. penetrans attachment was modelled using the Poisson and negative binomial distributions. Attachment count data were observed to be overdispersed with respect to high numbers of spores attaching on each J2 at 6 and 9 h after spore application. It was concluded that the negative binomial distribution was shown to be the most appropriate model to fit the observed data-sets considering that P. penetrans spores are clumped; this could be further refined with a Markov process.     

Some components of the air spora in Jamaica and their possible medical application

A knowledge of the pollen and fungal spores which comprise the air spora is useful as a preliminary approach to the problem of respiratory allergy. Therefore, this study of the qualitative and quantitative aspects of the air spora was done. Fungal spores were found to be numerically dominant, comprising 97.73% whilst pollen comprised 0.40% of the total material observed. A small number of types made up the majority of the fungal air spora, namely, Cladosporium, the Sporobolomycetaceae group, Diatrype, Glomerella, hyaline and coloured basidiospores, and septate fusiform spores. Seasonal periodicity studies on twenty-five fungal types showed that a high number of spores were trapped for sixteen during wet months, four during cooler months, and that five showed no seasonal trends. Mean diurnal periodicity studies for the year on the same twenty-five spore types showed that all had a maximum number of spores trapped at some time during the day. Investigation of the effect of rainfall on the numbers of spores released showed that the amount and duration of rainfall, the time of day rain occurs, and the length of the dry period preceding rain were of varying importance to particular spore types.     

Summer meeting 2013 – when the sleepers wake: the germination of spores of Bacillus species

Spores of Bacillus species can remain dormant and resistant for years, but can rapidly ‘come back to life’ in germination triggered by agents, such as specific nutrients, and non‐nutrients, such as CaDPA, dodecylamine and hydrostatic pressure. Major events in germination include release of spore core monovalent cations and CaDPA, hydrolysis of the spore cortex peptidoglycan (PG) and expansion of the spore core. This leads to a well‐hydrated spore protoplast in which metabolism and macromolecular synthesis begin. Proteins essential for germination include the GerP proteins that facilitate germinant access to spores' inner layers, germinant receptors (GRs) that recognize and respond to nutrient germinants, GerD important in rapid GR‐dependent germination, SpoVA proteins important in CaDPA release and cortex‐lytic enzymes that degrade cortex PG. Rates of germination of individuals in spore populations are heterogeneous, and methods have been developed recently to simultaneously analyse the germination of multiple individual spores. Spore germination heterogeneity is due primarily to large variations in GR levels among individual spores, with spores that germinate extremely slowly and termed superdormant having very low GR levels. These and other aspects of spore germination will be discussed in this review, and major unanswered questions will also be discussed.     

Effects of Macroalgal Chemical Extracts on Spore Behavior of the Antarctic Epiphyte Elachista antarctica Phaeophyceae

Most macroalgal species along the Western Antarctic Peninsula (WAP) are defended against predation, many using chemical defenses. These subtidal communities are also mostly devoid of free living filamentous algae. However, one endo/epiphyte, Elachista antarctica, is found growing exclusively out of the palatable rhodophyte Palmaria decipiens. To understand this unusual and exclusive epiphytization, we tested whether macroalgal secondary metabolites such as those responsible for deterring sympatric grazers, affect the behaviors of the epiphyte's spores. Settlement, germination, and swimming behaviors of the epiphyte's motile spores were quantified in the presence of fractionated lipophilic and hydrophilic extracts of host P. decipiens and other rhodophytes from the shallow subtidal. Host P. decipiens was the only alga tested that did not inhibit spore settlement or germination. We also examined whether extracts from these chemically rich algae affect spore swimming behaviors and found spores to be chemotactically attracted to seawater soluble extract fractions of host P. decipiens. These results indicate that chemosensory behaviors of the epiphyte's spores to metabolites associated with these chemically defended macrophytes can explain this exclusive epiphyte–host interaction.     

Modulation of spore adhesion of the hyperparasitic bacterium Pasteuria penetrans to nematode cuticle

S.B. Sharma and K.G. Davies. 1997. Monoclonal antibodies (mAb) raised to the cuticule surface of second-stage juveniles (J2) of the nematode Heterodern cajani were partially characterized by immunofluorescence and Western blot analysis. Five antigens with relative molecular weights (M_r) 55, 80, 110, 180 and 210 kDa were identified with six mAb. Pasteuria spores, originating from the same population of H. cajani to which the antibodies were raised, were tested for their ability to attach to J2, which had been pretreated with each of the mAb. Monoclonal antibody HC/129 was found to reduce spore attachment by 42%, whereas HC/145 increased spore attachment by 124%. This is the first record of an antibody binding to the cuticle and increasing spore attachment, and suggests that components of the cuticle involved in inhibiting spore attachment may be masking the Pasteuria receptor present on the cuticle.