Bacterial biofilms and surface fouling

Bacteria are attracted to surfaces. Their surface adhesion, with subsequent binary fission and exopolymer production, leads to the formation of biofilms. Such biofilms consist of bacterial cells in a matrix of their own exopolysaccharide glycocalyces. In addition to the bulk fluid and the surface, biofilms constitute a third physical phase. The close proximity of the bacterial cells in the biofilm matrices assists the formation of metabolically dependent consortia. The chemical and physical activities of these microbial communities produces a heterogeneous system at the colonised surface. Metabolites, produced at specific points on the surface, can lead to the development of effective anodes and cathodes at adjoining locations on the surface. In this way the fouling of a surface by bacterial biofilm development facilitates focal attack on that surface. This pit formation is characteristic of bacterial surface activities as diverse as dental decay and metal corrosion. In this review, we examine bacterial adhesion, biofilm formation and several instances of focal bacterial attack on colonised surfaces. However, pathogenic biofilms and the fouling of biological surfaces, with the exception of caries formation, is outside the scope of this paper.     

In situ corrosion control in industrial water systems

The main objective of this study was to evaluate the efficacy of a biocide and a corrosion inhibitor against the corrosion of a circulating pipe in a cooling tower. Isothiazolone was tested as the industrial biocide. The results showed that the biocide by itself or combined with a dispersant was not efficient to control corrosion in the industrial system. Corrosion rates of 0.324 mm/year were recorded in both the presence and absence of the biocide. Corrosion control was successfully accomplished by using a corrosion inhibitor. In the latter case the maximum corrosion rate of 0.024 mm/year were obtained.     

Microbially influenced corrosion of galvanized steel pipes in aerobic water systems

Aims: To investigate the role of heterotrophic bacteria in the corrosion of galvanized steel in the presence of water. Methods and Results: Samples were taken from corroding galvanized steel pipes conveying water for specialist applications, and heterotrophic bacteria were isolated and cultured. The majority of bacteria were Gram‐negative aerobes and included Pseudomonas sp., Bacillus pumilus, Afipia spp. and Blastobacter denitrificans/Bradyrhizobium japonicum. Zinc tolerance was assessed through growth and zinc disc diffusion experiments. In general, zinc negatively influenced growth rates. An unidentified yeast also isolated from the system demonstrated a high tolerance to zinc at concentrations up to 4 g l^?1. Coupon experiments were performed to assess corrosion by the bacteria on galvanized steel and steel coupons. The majority of isolates as pure culture biofilms (69%) accelerated corrosion of galvanized coupons, assessed as zinc release, relative to sterile control coupons (P < 0·05). Pure culture biofilms did not increase the corrosion of steel, with four isolates demonstrating protective effects. Conclusions: Pure culture biofilms of heterotrophic bacteria isolated from a corroding galvanized pipe system were found to accelerate the corrosion of galvanized steel coupons. Significance and Impact of the Study: Microbially influenced corrosion is a potential contributor to sporadically occurring failures in galvanized steel systems containing water. Management strategies should consider microbial control as a means for corrosion prevention in these systems.     

Metabolic model for glycogen-accumulating organisms in anaerobic/aerobic activated sludge systems

Glycogen-accumulating organisms (GAO) have the potential to directly compete with polyphosphate-accumulating organisms (PAO) in EBPR systems as both are able to take up VFA anaerobically and grow on the intracellular storage products aerobically. Under anaerobic conditions GAO hydrolyse glycogen to gain energy and reducing equivalents to take up VFA and to synthesise polyhydroxyalkanoate (PHA). In the subsequent aerobic stage, PHA is being oxidised to gain energy for glycogen replenishment (from PHA) and for cell growth. This article describes a complete anaerobic and aerobic model for GAO based on the understanding of their metabolic pathways. The anaerobic model has been developed and reported previously, while the aerobic metabolic model was developed in this study. It is based on the assumption that acetyl-CoA and propionyl-CoA go through the catabolic and anabolic processes independently. Experimental validation shows that the integrated model can predict the anaerobic and aerobic results very well. It was found in this study that at pH 7 the maximum acetate uptake rate of GAO was slower than that reported for PAO in the anaerobic stage. On the other hand, the net biomass production per C-mol acetate added is about 9% higher for GAO than for PAO. This would indicate that PAO and GAO each have certain competitive advantages during different parts of the anaerobic/aerobic process cycle.     

Bacterial community analysis of shallow groundwater undergoing sequential anaerobic and aerobic chloroethene biotransformation

At Department of Energy Site 300, beneficial hydrocarbon cocontaminants and favorable subsurface conditions facilitate sequential reductive dechlorination of trichloroethene (TCE) and rapid oxidation of the resultant cis-dichloroethene (cis-DCE) upon periodic oxygen influx. We assessed the geochemistry and microbial community of groundwater from across the site. Removal of cis-DCE was shown to coincide with oxygen influx in hydrocarbon-containing groundwater near the source area. Principal component analysis of contaminants and inorganic compounds showed that monitoring wells could be differentiated based upon concentrations of TCE, cis-DCE, and nitrate. Structurally similar communities were detected in groundwater from wells containing cis-DCE, high TCE, and low nitrate levels. Bacteria identified by sequencing 16S rRNA genes belonged to seven phylogenetic groups, including Alpha-, Beta-, Gamma- and Deltaproteobacteria, Nitrospira, Firmicutes and Cytophaga-Flexibacter-Bacteroidetes (CFB). Whereas members of the Burkholderiales and CFB group were abundant in all wells (10(4)-10(9) 16S rRNA gene copies L(-1)), quantitative PCR showed that Alphaproteobacteria were elevated (>10(6) L(-1)) only in wells containing hydrocarbon cocontaminants. The study shows that bacterial community structure is related to groundwater geochemistry and that Alphaproteobacteria are enriched in locales where cis-DCE removal occurs.     

Metagenomes of tropical soil-derived anaerobic switchgrass-adapted consortia with and without iron

Tropical forest soils decompose litter rapidly with frequent episodes of anoxia, making it likely that bacteria using alternate terminal electron acceptors (TEAs) such as iron play a large role in supporting decomposition under these conditions. The prevalence of many types of metabolism in litter deconstruction makes these soils useful templates for improving biofuel production. To investigate how iron availability affects decomposition, we cultivated feedstock-adapted consortia (FACs) derived from iron-rich tropical forest soils accustomed to experiencing frequent episodes of anaerobic conditions and frequently fluctuating redox. One consortium was propagated under fermenting conditions, with switchgrass as the sole carbon source in minimal media (SG only FACs), and the other consortium was treated the same way but received poorly crystalline iron as an additional terminal electron acceptor (SG + Fe FACs). We sequenced the metagenomes of both consortia to a depth of about 150 Mb each, resulting in a coverage of 26× for the more diverse SG + Fe FACs, and 81× for the relatively less diverse SG only FACs. Both consortia were able to quickly grow on switchgrass, and the iron-amended consortium exhibited significantly higher microbial diversity than the unamended consortium. We found evidence of higher stress in the unamended FACs and increased sugar transport and utilization in the iron-amended FACs. This work provides metagenomic evidence that supplementation of alternative TEAs may improve feedstock deconstruction in biofuel production.     

The use of fatty acid methyl esters as biomarkers to determine aerobic, facultatively aerobic and anaerobic communities in wastewater treatment systems

The use of fatty acid methyl esters (FAME) as biomarkers to identify groups of microorganisms was studied. A database was constructed using previously published results that identify FAME biomarkers for aerobic, anaerobic and facultatively aerobic bacteria. FAME profiles obtained from pure cultures were utilized to confirm the predicted presence of biomarkers. Principal component analysis demonstrated that the FAME profiles can be used to determine the incidence of these bacterial groups. The presence of aerobic, anaerobic and facultatively aerobic bacteria in the communities, in four bioreactors being used to treat different wastewaters, was investigated by applying FAME biomarkers.     

Influence of carbon steel grade on the initial attachment of bacteria and microbiologically influenced corrosion

The influence of the composition and microstructure of different carbon steel grades on the initial attachment (≤ 60 min) of Escherichia coli and subsequent longer term (28 days) corrosion was investigated. The initial bacterial attachment increased with time on all grades of carbon steel. However, the rate and magnitude of bacterial attachment varied on the different steel grades and was significantly less on the steels with a higher pearlite phase content. The observed variations in the number of bacterial cells attached across different steel grades were significantly reduced by applying a fixed potential to the steel samples. Longer term immersion studies showed similar levels of biofilm formation on the surface of the different grades of carbon steel. The measured corrosion rates were significantly higher in biotic conditions compared to abiotic conditions and were found to be positively correlated with the pearlite phase content of the different grades of carbon steel coupons.     

Characterization of aerobic,facultative anaerobic,and anaerobic bacteria in an acidogenic phase reactor and their metabolite formation

Fifty-two aerobic and facultative anaerobic and 57 anaerobic bacterial isolates were obtained from an acidogenic phase digestion system. These isolates were characterized and the similarities between the different strains were calculated using Sokal and Michener's similarity coefficient. The aerobic and facultative anaerobic strains clustered in two major groups with the strains of the first main group being gram-negative fermentative rods, representing the generaKlebsiella, Enterobacter, Escherichia andAeromonas. Isolates of the second group were gram-positive streptococci similar toStreptococcus lactis. The strict anaerobic isolates also clustered into two main groups with strains of cluster A being identified as members of the genusFusobacterium while strains in cluster B were members of the genusBacteroides. Hypothetical mean organisms were calculated for each cluster and used in further culture studies. The major products of the continuously fed acidogenic phase reactor were ethanol and acetic, propionic, and butyric acids. In batch cultures, ethanol, acetic acid, diacetyl, and 2,3-butanediol were formed by the strains as major products both under aerobic and anaerobic conditions. The ability of the aerobic and facultative anaerobic strains to be metabolically active under anaerobic conditions indicates a prominent role in acidogenic reactors.     

Biodeterioration of painted mortar surfaces in tropical urban and coastal situations: Comparison of four paint formulations

Four different architectural acrylic paint formulations were tested by exposure to weathering for 7 years in the urban site of São Paulo and the coastal site of Ubatuba, South-East Brazil. Surface discolorations and detachment of coatings were assessed and the components of the biofilms were identified by standard microbiological methods. The painted surfaces of the mortar panels were much more discolored in Ubatuba, where major components of the biofilms were the cyanobacteria Gloeocapsa and Scytonema. In two of the four paint films, a pink coloration on the surface at this coastal site, caused mainly by red-pigmented Gloeocapsa, produced high discoloration ratings, but low degradation (as measured by detachment). Biofilms in São Paulo contained the same range of phototrophs, but in lesser quantity. However, fungal numbers, as determined by plating, were higher. Detachment ratings in this urban site were only slightly lower than in Ubatuba. The matt paint performed worst of the four, with silk and semi-gloss finishes giving lowest biodeterioration ratings. The matt elastomeric paint performed well at both sites, apart from becoming almost 100% covered by the pink biofilm in Ubatuba. Unpainted mortar panels became intensely discolored with a black biofilm, showing that all the paints had achieved one of their objectives, that of surface protection of the substrate. The value of PVC (pigment volume content) as an indicator of coatings biosusceptibility, is questioned.     

The influence of sunlight on the localized corrosion of UNS S31600 in natural seawater

Tests were conducted on the performance of UNS S31600 stainless steel (SS) in a natural day/night cycle vs full darkness under conditions of natural marine biofilm accumulation. In quiescent flowing seawater tests in the laboratory as well as under natural immersion in the sea, diffuse sunlight (～10% of natural) counteracted the influence of marine biofilms and produced substantial inhibition of the corrosion of SS. Thus, the probabilities (percentage attack) and propagation rates (depths of attack) in multiple crevice tests were substantially lower in the day/night cycle than in the dark. A benefit was also observed for welded SS in terms of the time to corrosion initiation and the mass loss. SS in the passive state showed broader passive regions, well-defined breakdown potentials and markedly smaller anodic and cathodic current densities under the diurnal cycle. The overall reduction in corrosion is attributed to a combination of electrochemical photoinhibition and simultaneous photoinactivation of microbially mediated metal redox reactions linked to cathodic kinetics. These data offer fresh insights into the behaviour of SS under practical seawater situations and the proposed potential use of illumination in the mitigation of biologically influenced consequences.     

Genetic and biochemical analysis of high iron toxicity in yeast: iron toxicity is due to the accumulation of cytosolic iron and occurs under both aerobic and anaerobic conditions

Iron storage in yeast requires the activity of the vacuolar iron transporter Ccc1. Yeast with an intact CCC1 are resistant to iron toxicity, but deletion of CCC1 renders yeast susceptible to iron toxicity. We used genetic and biochemical analysis to identify suppressors of high iron toxicity in Δccc1 cells to probe the mechanism of high iron toxicity. All genes identified as suppressors of high iron toxicity in aerobically grown Δccc1 cells encode organelle iron transporters including mitochondrial iron transporters MRS3, MRS4, and RIM2. Overexpression of MRS3 suppressed high iron toxicity by decreasing cytosolic iron through mitochondrial iron accumulation. Under anaerobic conditions, Δccc1 cells were still sensitive to high iron toxicity, but overexpression of MRS3 did not suppress iron toxicity and did not result in mitochondrial iron accumulation. We conclude that Mrs3/Mrs4 can sequester iron within mitochondria under aerobic conditions but not anaerobic conditions. We show that iron toxicity in Δccc1 cells occurred under both aerobic and anaerobic conditions. Microarray analysis showed no evidence of oxidative damage under anaerobic conditions, suggesting that iron toxicity may not be solely due to oxidative damage. Deletion of TSA1, which encodes a peroxiredoxin, exacerbated iron toxicity in Δccc1 cells under both aerobic and anaerobic conditions, suggesting a unique role for Tsa1 in iron toxicity.     

Bacterial leaching of uranium ore from Figueira—PR, Brazil, at laboratory and pilot scale

Abstract: A bacterial leaching program was carried out in order to evaluate the potential of applying this process to leach uranium from the ore of Figueira-PR, Brazil. The experiments were carried out in shake flasks, column percolation (laboratory and scmipilot scale)and in heap leaching. In shake flasks and in column percolation experiments at laboratory scale, bacterial activity on Ihe ore was confirmed: approximately 60% of uranium was leached, against around 30% in sterilized controls. Colunm percolation experiments at semipilot scale and heap leaching (850 tons of ore) showed uranium extractions of approximately 50%. In both experiments, a complementary sulfuric acid attack, after the bacterial leaching phase, was neccssaw to reach this level of uranium extraction.     

Sequencing, cloning and expression of a β-1,4-mannanase gene, manA, from the extremely thermophilic anaerobic bacterium, Caldicellulosiruptor Rt8B.4

Abstract We report here the isolation of a Renibacterium salmoninarum DNA sequence capable of transforming a non-invasive Escherichia coli strain into a microorganism able to enter the fish cell line, CHSE-214. Immunofluorescence and electron microscopy techniques were used to assess the acquired invasive phenotype by HB101 E. coli cells, upon transformation with pPMV-189. This plasmid carries a 2282-bp R. salmoninarum DNA segment. The invasive phenotype is qonserved upon deletion of approximately 1000 bp at the 3' end of the insert. The remaining segment contains an ORF region encoding a putative protein of about 30 kDa.     

Competition and coexistence of sulfate-reducing bacteria,acetogens and methanogens in a lab-scale anaerobic bioreactor as affected by changing substrate to sulfate ratio

The microbial population structure and function of natural anaerobic communities maintained in lab-scale continuously stirred tank reactors at different lactate to sulfate ratios and in the absence of sulfate were analyzed using an integrated approach of molecular techniques and chemical analysis. The population structure, determined by denaturing gradient gel electrophoresis and by the use of oligonucleotide probes, was linked to the functional changes in the reactors. At the influent lactate to sulfate molar ratio of 0.35 mol mol⁻¹, i.e., electron donor limitation, lactate oxidation was mainly carried out by incompletely oxidizing sulfate-reducing bacteria, which formed 80–85% of the total bacterial population. Desulfomicrobium- and Desulfovibrio-like species were the most abundant sulfate-reducing bacteria. Acetogens and methanogenic Archaea were mostly outcompeted, although less than 2% of an acetogenic population could still be observed at this limiting concentration of lactate. In the near absence of sulfate (i.e., at very high lactate/sulfate ratio), acetogens and methanogenic Archaea were the dominant microbial communities. Acetogenic bacteria represented by Dendrosporobacter quercicolus-like species formed more than 70% of the population, while methanogenic bacteria related to uncultured Archaea comprising about 10–15% of the microbial community. At an influent lactate to sulfate molar ratio of 2 mol mol⁻¹, i.e., under sulfate-limiting conditions, a different metabolic route was followed by the mixed anaerobic community. Apparently, lactate was fermented to acetate and propionate, while the majority of sulfidogenesis and methanogenesis were dependent on these fermentation products. This was consistent with the presence of significant levels (40–45% of total bacteria) of D. quercicolus-like heteroacetogens and a corresponding increase of propionate-oxidizing Desulfobulbus-like sulfate-reducing bacteria (20% of the total bacteria). Methanogenic Archaea accounted for 10% of the total microbial community.     

Characterization of hydrocarbon-degrading bacteria isolated from oil-contaminated sediments in the Sultanate of Oman and evaluation of bioaugmentation and biostimulation approaches in microcosm experiments

Two oil-polluted sediments (PD and KH) were sampled from a coastal region in Oman for the isolation of hydrocarbon-degrading bacteria and for testing different bioremediation approaches. Fourty strains were isolated, eighteen were affiliated to Marinobacter whereas the rest belonged to Pseudomonas, Halomonas, Hahella and Alcanivorax. All strains grew well at 2–7% salinity and between 20 and 60 °C. The strains exhibited a better growth on long chain than on short chain alkanes. Biostimulation and bioaugmentation were compared in both sediments and oil biodegradation was followed by measuring CO₂ evolution and by gas chromatography (GC). The evolved CO₂ reached 0.45 ± 0.02 and 2.23 ± 0.07 mg CO₂ g⁻¹ sediment after 88 days in the untreated PD and KH sediments, respectively. While the addition of inorganic nutrients resulted in 1.2–3.7 fold increase in CO₂ evolution in both sediments, the addition of the bacterial consortium was only effective in the PD sediment. The maximum CO₂ evolution was measured when both nutrients and bacteria were added and this corresponded to a total oil mineralization of 2.6 ± 0.12 and 1.49 ± 0.04% of the initial oil after 88 days in the PD and KH sediments, respectively. GC analysis confirmed the CO₂ data and showed that most of the degraded compounds belonged to alkanes. We conclude that the Omani polluted sediments contain halotolerant and thermotolerant bacteria and biostimulation is more efficient than bioaugmentation for their cleanup.     

The surface properties of some silicone and fluorosilicone coating materials immersed in seawater

Changes in the surface properties of some silicone elastomers (General Electric RTV11, RTV160 and RTV655) and fluorosilicones (‐(Si(CH₃)((CH₂)₃‐O(CH₂)₂(CF₂)_XCF₃)‐O)_n‐, x = 5,7,9) on prolonged immersion in water (distilled water, artificial seawater, filtered and unfiltered seawater) have been investigated using measurements of advancing and receding contact angles, of surface roughness and of water uptake. Considerable increases in hydrophilicity and surface rugosity are attributed mainly to surface structural rearrangements accompanying absorption of water; these effects are greater for the fluorosilicones and the rugosity of RTV160 also increased considerably. Observations of early marine settlement (up to 16 weeks in flowing seawater), visualised by scanning electron microscopy, showed patchy attachment mainly of bacteria and microalgae while mature biofilms were formed on the poly(methylmethacrylate) controls. Although settlement was least on RTV11 and greatest on the fluorosilicones, the range of variation was small relative to the differences in the long‐term fouling resistance of the materials. The design requirements for fouling resistance of a smooth, soft, uniform surface are supported.