Gene cloning,purification, and characterization of the highly thermostable leucine dehydrogenase of Bacillus sp.

The leucine dehydrogenase (l-leucine: NAD⁻ oxidoreductase, deaminating, EC 1.4.1.9) gene from Bacillus sp. DSM730 was cloned into Escherichia coli C600 with a vector plasmid, pBR322. The E. coli cells carrying a recombinant plasmid, pKULD1 (9.5 kb), produced a highly thermostable leucine dehydrogenase. The enzyme from E. coli cells carrying pKULD103, a deletion plasmid (6.5 kb) of pKULD1, was purified to homogeneity from the crude extract of clone cells by only one ion-change chromatography application with a yield of 73%. The leucine dehydrogenase of Bacillus sp. DSM730 is very similar in enzymological properties to those of other bacteria, except for molecular weight and stability. It has a molecular weight of about 280,000 and consists of six subunits identical in molecular weight (47,000). The enzyme is not inactivated by heat treatment at 80°C for 10 min, and incubation in the pII range of 5.4 to 10.3 at 55°C for 10 min. The Bacillus sp. DSM730 leucine dehydrogenase is the most thermostable of the leucine dehydrogenases so far purified, and is very useful for structure and stability studies, as well as being applicable to l-leucine production.     

Cloning, purification, and characterization of chitosanase from Bacillus sp. DAU101

A chitosanase-producing Bacillus sp. DAU101 was isolated from Korean traditional food. This strain was identified on the basis of phylogenetic analysis of the 16S rDNA sequence, gyrA gene, and phenotypic analysis. The gene encoding chitosanase (csn) was cloned and sequenced. The csn gene consisted of an open reading frame of 837 nucleotides and encodes 279 amino acids with a deduced molecular weight of 31,420 Da. The deduced amino acid sequence of the chitosanase from Bacillus sp. DAU101 exhibits 88 and 30 % similarity to those from Bacillus subtilis and Pseudomonas sp., respectively. The chitosanase was purified by glutathione S-transferase fusion purification system. The molecular weight of purified enzyme was about 27 kDa, which suggests the deletion of a signal peptide by sodium dodecyl sulfate–polyacrylamide gel electrophoresis. The pH and temperature optima of the enzyme were 7.5 and 50 °C, respectively. The enzyme activity was increased by about 1.6-fold by the addition of 5 or 10 mM Ca²⁺. However, Hg²⁺ and Ni⁺ ions strongly inhibited the enzyme. The enzyme produced, GlcN_2–4, were the major products from a soluble chitosan.     

Cloning and sequence analysis of aStreptomyces cholesterol esterase gene

Streptomyces lavendulae H646-SY2 produces cholesterol esterase (CHE; EC 3.1.1.13) extracellularly. A genomic library of the strain, prepared in plasmid pUC119, was screened with probes based on the amino acid sequence of the protein. A plasmid, designated as pKX101 and identified by hydridization with the probes, contained a 2.7-kb insert fromStreptomyces DNA. We determined the 17-N-terminal amino acid sequence of mature CHE and the nucleotide sequence of the 0.9-kb segment containing the CHE gene (che). We found that the N-terminal of the mature CHE was Ala³⁹ and an open reading frame consisting of 681 bp starts at ATG and ends at TGA, suggesting that a precursor and a mature CHE consist of 227 and 189 amino acids, with a calculated relative molecular mass of 24,362 and 20,650, respectively. The leader peptide extends over 38 amino acids and has the characteristics of a signal sequence, including basic amino acids near the N-terminus and a hydrophobic core near the signal cleavage site.     

Cloning of the thermostable phytase gene (phy) from Bacillus sp. DS11 and its overexpression in Escherichia coli

Phytase hydrolyzes phytate to release inorganic phosphate, which would decrease the addition of phosphorus to feedstuffs for monogastric animals and thus reduce environmental pollution. The gene encoding phytase from Bacillus sp. DS11 was cloned in Escherichia coli and its sequence determined. A 560-bp DNA fragment was used as a probe to screen the genomic library. It was obtained through PCR of Bacillus sp. DS11 chromosomal DNA and two oligonucleotide primers based on N-terminal amino acid sequences of the purified protein and the cyanogen bromide-cleaved 21-kDa fragment. The phy cloned was encoded by a 2.2-kb fragment. This gene comprises 1152 nucleotides and encodes a polypeptide of 383 amino acids with a deduced molecular mass of 41 808 Da. Phytase was produced to 20% content of total soluble proteins in E. coli BL21 (DE3) using the pET22b(+) vector with the inducible T7 promoter. This is the first nucleic sequence report on phytase from a bacterial strain.     

The gene encoding dipeptidyl aminopeptidase BI from Pseudomonas sp. WO24: cloning,sequencing and expression in Escherichia coli

We have isolated the dipeptidyl aminopeptidase BI (DAP BI) gene from the plasmid library of Pseudomonas sp. WO24 chromosomal DNA by the enzymatic plate asaay using a chromogenic substrate. The DAP BI gene, designated dap b1, was further subcloned and sequenced. Sequence analysis of an approx. 3-kb fragment revealed an open reading frame of 2169 nucleotides, which was assigned to the dap b1 gene by N-terminal and internal amino acid sequences. The predicted amino acid sequence of DAP BI containing a serine protease Gly–X–Ser–X–Gly consensus motif displays extensive homologies to the several proteases belonging to the prolyl oligopeptidase family, a novel serine protease family possessing the catalytic triad with a specific array of Ser, Asp and His in this order, which is the hallmark of the member of this family including DAP IV. The dap b1 gene was expressed in Escherichia coli and the expressed enzyme was purified about 230-fold with 2.6% recovery from the cell-free extracts. The enzymatic properties such as molecular mass, substrate specificity and effect of inhibitor were similar to the native enzyme from Pseudomonas sp. WO24.     

A Bacillus subtilis locus encoding several gene products affecting transport of cations

A 3.6-kb DNA fragment from Bacillus subtilis was found to complement the K⁺ uptake-deficient Escherichia coli strain TK2420. Transformation with a pKLO61 plasmid harboring this fragment conferred the capacity to grow on a minimal medium containing only 10 mM K⁺. Insertional mutagenesis and subcloning identified a single gene responsible for the complementation. This gene coded for an apparent homolog of E. coli TrkA. Sequence analysis of the cloned region also revealed three additional open reading frames. These included: a gene encoding a homolog to the czcD gene product of Alcaligenes eutrophus, a lysR-type regulatory gene which was found to enhance Na⁺ resistance in E. coli NM81 (ΔnhaA) in a separate complementation test, and an orfD with no significant similarity to sequences deposited in Genbank.     

Sequence of the Bacillus stearothermophilus gene encoding aspartokinase II

The complete nucleotide sequence of the gene encoding aspartokinase (Ask) II from thermophilic Bacillus stearothermophilus has been determined. Degenerate oligodeoxyribonucleotides primed the amplification of a 932-bp gene. This sequence was successively used for constructing new primers applied in inverse polymerase chain reaction using, as template, self-ligating DNA fragments. The deduced amino-acid sequence is 68.7% identical with the sequence of the Bacillus sp. strain MGA3 Ask II     

Cloning of the cyclodextrin glucanotransferase gene from alkalophilic Bacillus sp. A2-5a and analysis of the raw starch-binding domain

The cyclodextrin glucanotransferase (CGTase) gene of alkalophilic Bacillus sp. A2-5a was cloned and expressed in Bacillus subtilis ANA-1 as a host. The DNA region included an open reading frame encoding a 704-amino-acid polypeptide with a typical raw starch-binding motif in its C-terminal region. The CGTase purified from Bacillus sp. A2-5a bound to raw starch as strongly as porcine pancreas α-amylase, as expected from the sequence motif. A chromosomal region (a DNA fragment of about 14.1 kbp) including the CGTase gene was also cloned and the nucleotide sequence was determined. Possible cyclodextrinase and putative cyclodextrin-binding protein genes were found in the flanking region of the CGTase gene, which implied that the novel starch-degradation pathway postulated for a gram-negative bacterium [Klebsiella oxytoca; Fiedler et al. (1996) J Mol Biol 256: 279–291] also exists in a gram-positive bacterium i.e. Bacillus. Received: 6 August 1999 / Received last revision: 8 October 1999 / Accepted: 22 October 1999     

Establishment of an efficient transformation protocol and its application in marine-derived Bacillus strain

Marine-derived Bacillus strains have been proved to be a very promising source for natural product leads.However,transformation of environmental strains is much more difficult than that of domesticated strains.Here,we report the development of an efficient and robust electroporation-based transformation system for marine-derived Bacillus marinus B-9987,which is a macrolactin antibiotics producer and a very promising biological control agent against fungal plant diseases.The transformation efficiency was greatly enhanced 103-fold by using unmethylated plasmid to bypass modification-restriction barrier,and using glycine betaine to protect cells from electrical damages during electroporation.Addition of HEPES and 2 mmol L?1MgCl2 further improved the efficiency by additional 2-fold,with a maximum value of 7.1×104 cfu/μg pHT3101.To demonstrate the feasibility and efficiency of the protocol,a green fluorescent protein reporter system was constructed;furthermore,phosphopantetheinyl transferase gene sfp,which is essential to the biosynthesis of polyketides and nonribosomal peptides,was overexpressed in B-9987,leading to increased production of macrolactin A by about 1.6-fold.In addition,this protocol is also applicable to marine-derived Bacillus licheniforms EI-34-6,indicating it could be a reference for other undomesticated Bacillus strains.To our knowledge,this is the first report regarding the transformation of marine-derived Bacillus strain.     

A Novel Erythromycin Resistance Plasmid from Bacillus Sp. Strain HS24, Isolated from the Marine Sponge Haliclona Simulans

A better understanding of the origin and natural reservoirs of resistance determinants is fundamental to efficiently tackle antibiotic resistance. This paper reports the identification of a novel 5.8 kb erythromycin resistance plasmid, from Bacillus sp. HS24 isolated from the marine sponge Haliclona simulans. pBHS24B has a mosaic structure and carries the erythromycin resistance gene erm(T). This is the first report of an erythromycin resistance plasmid from a sponge associated bacteria and of the Erm(T) determinant in the genus Bacillus.     

Isolation of a biphenyl-degrading bacterium,Achromobacter sp. BP3, and cloning of the bph gene cluster

A bacterial strain, BP3, capable of degrading biphenyl, was isolated from petroleum-contaminated soil. Strain BP3 was identified preliminarily as Achromobacter sp. based on its physiological and biochemical characteristics and 16S rRNA gene sequence analysis. Strain BP3 was able to degrade 50 mg l^?1 of biphenyl within 12 h. A 16.7-kb DNA fragment consisting of the entire bph cluster (bphRA1A2XA3A4BCKHJID) was obtained by normal PCR amplification and chromosome walking. Genes encoding integrase and transposon related genes were detected upstream and downstream of the bph cluster, respectively, which indicated that the bph cluster might locate on a big mobile genetic element (MGE).     

Molecular characterization of inorganic sulfur‐compound metabolism in the deep‐sea epsilonproteobacterium Sulfurovum sp. NBC37‐1

The molecular components involved in energy metabolism of deep‐sea Epsilonproteobacteria were characterized in the mesophilic hydrogen‐ and sulfur‐oxidizing chemolithoautotroph Sulfurovum sp. NBC37‐1. Previous whole‐genome analysis of strain NBC37‐1 identified key genes likely to be associated with both sulfur reduction (psr gene families) and oxidation (two sox gene clusters). However, the sox gene clusters showed unique organizations and low homologies to those in other bacteria. Therefore, the biochemical mechanism of inorganic sulfur metabolism has been uncertain. Enzymatic activity measurements and partial protein purification indicated that the Sox enzyme system was constitutively expressed, whereas the expression of sulfur‐reduction enzymes varied depending on the culture conditions. The operative Sox system in strain NBC37‐1 required membrane components. The molecular basis of energy metabolism reported in this study provides important insight into how deep‐sea Epsilonproteobacteria change their energy metabolism in response to variable physical and chemical conditions in mixing zones between hydrothermal fluid and ambient seawater.     

Enhancement of 2,3-butanediol production from Jerusalem artichoke tuber extract by a recombinant <Emphasis Type="Italic">Bacillus</Emphasis> sp. strain BRC1 with increased inulinase activity

A Bacillus sp. strain named BRC1 is capable of producing 2,3-butanediol (2,3-BD) using hydrolysates of the Jerusalem artichoke tuber (JAT), a rich source of the fructose polymer inulin. To enhance 2,3-BD production, we undertook an extensive analysis of the Bacillus sp. BRC1 genome, identifying a putative gene (sacC) encoding a fructan hydrolysis enzyme and characterizing the activity of the resulting recombinant protein expressed in and purified from Escherichia coli. Introduction of the sacC gene into Bacillus sp. BRC1 using an expression vector increased enzymatic activity more than twofold. Consistent with this increased enzyme expression, 2,3-BD production from JAT was also increased from 3.98 to 8.10 g L^?1. Fed-batch fermentation of the recombinant strain produced a maximal level of 2,3-BD production of 28.6 g L^?1, showing a high theoretical yield of 92.3%.     

Conjugative chromosomal gene transfer in <Emphasis Type="Italic">Bacillus subtilis</Emphasis>

Conjugative transfer of 20-kb chromosomal fragment carrying genes encoding tetracycline (tet ^r ) and lincomycin (lin ^r ) resistance in the soil strain Bacillus subtilis 19 is described. Transfer was preceded by this fragment insertion into the large conjugative p19cat plasmid producing a hybrid plasmid. Insertion frequency was 10^?4?10^?5. Then genes tet ^r and lin ^r were transferred to the recipient strains. The transfer of chromosomal genes inserted into the plasmid and plasmid gene cat occurred sequentially and resembled sexduction, which represents chromosomal gene transfer by F′ and R′ plasmids during conjugation in Escherichia coli and other gram negative bacteria.     

A transgene expression system for the marine microalgae Aurantiochytrium sp. KRS101 using a mutant allele of the gene encoding ribosomal protein L44 as a selectable transformation marker for cycloheximide resistance

In the present study, we established a genetic system for manipulating the oleaginous heterotrophic microalgae Aurantiochytrium sp. KRS101, using cycloheximide resistance as the selectable marker. The gene encoding ribosomal protein L44 (RPL44) of Aurantiochytrium sp. KRS101 was first identified and characterized. Proline 56 was replaced with glutamine, affording cycloheximide resistance to strains encoding the mutant protein. This resistance served as a novel selection marker. The gene encoding the Δ12-fatty acid desaturase of Mortierella alpina, used as a reporter, was successfully introduced into chromosomal DNA of Aurantiochytrium sp. KRS101 via 18S rDNA-targeted homologous recombination. Enzymatic conversion of oleic acid (C18:1) to linoleic acid (C18:2) was detected in transformants but not in the wild-type strain.     

Cloning and characterization of the gene for Salmonella typhimurium serine hydroxymethyltransferase

A plasmid containing the glyA gene of Salmonella typhimurium LT2 was constructed in vitro using plasmid pACYC184 as the cloning vector and a λgt7-glyA transducing phage as the source of glyA DNA. The recombinant plasmid (pGS30) contains a 10-kb EcoRI insert fragment. Genetic and biochemical experiments established that the fragment contains a functional glyA gene. From plasmid pGS30 we subcloned a 4.4-kb SalI-EcoRI fragment containing the glyA gene and its neighboring regions (plasmid pGS38). The location and orientation of the glyA gene within the 4.4-kb insert fragment was determined in four ways: (1) comparison of the physical map of the 4.4-kb SalI-EcoRI fragment with the physical map of a 2.6-kb SalI-PvuII fragment that carries the Escherichia coli glyA gene; (2) deletion analysis; (3) transposon Tn5 insertional inactivation experiments; (4) deoxyribonucleic acid sequencing and comparison of the S. typhimurium DNA sequence with the E. coli DNA sequence. A presumptive glyA-encoded polypeptide of M_r 47000 was detected using plasmid pGS38 as template in a minicell system, but not when the glyA gene was inactivated by insertion of a Tn5 element.     

Isolation of a cDNA probe for a human jejunal brush-border hydrolase,sucrase-isomaltase,and assignment of the gene locus to chromosome 3

We report the nucleotide sequence and derived amino acid sequence of a cDNA clone encoding most of the N-terminal, isomaltase region of human sucrase-isomaltase (SI). A plasmid containing this cDNA, pS 12, identifies a 6-kb mRNA found in human jejunum and the human colon carcinoma cell Une Caco-2. This human SI cDNA shows extensive overall homology with recently published rabbit SI cDNA. Using pSI2 to probe DNA from a panel of somatic cell hybrids, we have assigned the gene encoding human SI to chromosome 3.