High constitutive peroxidase activity and constitutive thermotolerance in <Emphasis Type="Italic">Neurospora crassa</Emphasis>

 During the isolation of mutations in the heat-inducible hsp70-1 gene of Neurospora crassa by RIP (repeat-induced point mutations), several transformants were generated by electroporation of conidia with a plasmid harboring an incomplete copy of this gene. One isolate, designated E-45, containing ectopically integrated hsp70-1 DNA, exhibited a slow growth rate, low-temperature sensitivity, constitutive thermotolerance (without prior heat shock), and high constitutive peroxidase activity. The constitutive form of peroxidase (CP) was distinguishable from the heat-inducible form (HIP) by immunoinactivation employing polyclonal antiserum against the latter enzyme and by electrophoretic resolution in nondenaturing polyacrylamide gels. This enzyme was purified to near homogeneity and some of its properties examined. The relative molecular mass of native CP was in the range of 118–136 kDa, as estimated by gel filtration analysis on size exclusion matrices, whereas SDS-PAGE analysis yielded a size of ∼37 kDa for the polypeptide. Substrate saturation kinetics studies were conducted using ABTS [2,2′-azino-bis (3-ethylbenzthiazole-6-sulfonic acid)] and H₂O₂ as substrates: K _m, V _max, and K _cat values for H₂O₂ were ∼22 μM, ∼447 nmol mg⁻¹, and 0.33 s⁻¹, respectively, and those for ABTS were ∼55 μM, ∼453 nmol mg⁻¹, and 0.3 s⁻¹, respectively. Guaiacol was not used as a substrate by this enzyme. CP peroxidase was shown to be a heme-containing enzyme, stable at temperatures up to 58°C. Received: August 5, 2002 / Accepted: January 22, 2003 Acknowledgments This work was supported by an operating grant from the Natural Sciences and Engineering Research Council (NSERC) of Canada (to M.K.). The financial support provided to A. M. in the form of a graduate studentship award by the AHFMR (Alberta Heritage Foundation for Medical Research) and of a graduate teaching assistantship to A. S. by the Department of Biological Sciences, University of Calgary, is gratefully acknowledged. Correspondence to:M. Kapoor     

<Emphasis Type="SmallCaps">l</Emphasis>-Proline nutrition and catabolism in <Emphasis Type="Italic">Staphylococcus saprophyticus</Emphasis>

Staphylococcus saprophyticus strains ATCC 15305, ATCC 35552, and ATCC 49907 were found to require l-proline but not l-arginine for growth in a defined culture medium. All three strains could utilize l-ornithine as a proline source and contained l-ornithine aminotransferase and Δ¹-pyrroline-5-carboxylate reductase activities; strains ATCC 35552 and ATCC 49907 could use l-arginine as a proline source and had l-arginase activity. The proline requirement also could be met by l-prolinamide, l-proline methyl ester, and the dipeptides l-alanyl-l-proline and l-leucyl-l-proline. The bacteria exhibited l-proline degradative activity as measured by the formation of Δ¹-pyrroline-5-carboxylate. The specific activity of proline degradation was not affected by addition of l-proline or NaCl but was highest in strain ATCC 49907 after growth in Mueller–Hinton broth. A membrane fraction from this strain had l-proline dehydrogenase activity as detected both by reaction of Δ¹-pyrroline-5-carboxylate with 2-aminobenzaldehyde (0.79 nmol min⁻¹ mg⁻¹) and by the proline-dependent reduction of p-iodonitrotetrazolium (20.1 nmol min⁻¹ mg⁻¹). A soluble fraction from this strain had Δ¹-pyrroline-5-carboxylate dehydrogenase activity (88.8 nmol min⁻¹ mg⁻¹) as determined by the NAD⁺-dependent oxidation of dl-Δ¹-pyrroline-5-carboxylate. Addition of l-proline to several culture media did not increase the growth rate or final yield of bacteria but did stimulate growth during osmotic stress. When grown with l-ornithine as the proline source, S. saprophyticus was most susceptible to the proline analogues L-azetidine-2-carboylate, 3,4-dehydro-dl-proline, dl-thiazolidine-2-carboxylate, and l-thiazolidine-4-carboxylate. These results indicate that proline uptake and metabolism may be a potential target of antimicrobial therapy for this organism.     

Characterization of a Novel Proteinous Toxin from Sea Anemone <Emphasis Type="Italic">Actineria villosa</Emphasis>

The sea anemone Actineria villosa expresses a lethal protein toxin. We isolated a novel 120-kDa protein, Avt120, from partially purified toxin and found it to possess extremely strong lethal activity. The 3,453-bp Avt120 gene translates to a 995-amino acid protein. The 50% lethal dose (LD₅₀) of purified Avt120 in mice was 85.17 ng. Among several tested cell lines, Colo205 cells were most sensitive to Avt120: 50% of them were damaged by 38.4 ng/mL Avt120. Avt120 exerted ATP degradation activity (10 μmol ATP h⁻¹ mg⁻¹), which was strongly inhibited by ganglioside GM1 to decrease the cytotoxicity of Avt120.     

Construction,expression and characterization of fusion enzyme from <Emphasis Type="Italic">Arthrobacter oxydans</Emphasis> dextranase and <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis> amylase

An artificial fusion protein of Arthrobacter oxydans dextranase and Klebsiella pneumoniae α-amylase was constructed and expressed in Escherichia coli. Most of the expressed protein existed as an insoluble fraction, which was solubilized with urea. The purified fusion enzyme electrophoretically migrated as a single protein band; M = 137 kDa, and exhibited activities of both dextranase (10.8 U mg⁻¹) and amylase (7.1 U mg⁻¹), which were lower than that of reference dextranase (13.3 U mg⁻¹) and α-amylase (103 U mg⁻¹). The fusion enzyme displayed bifunctional enzyme activity at pH 5–7 at 37°C. These attributes potentially make the fusion enzyme more convenient for use in sugar processing than a two-enzyme system.     

Characterization of osmolyte betaine synthesizing sarcosine dimethylglycine <Emphasis Type="Italic">N</Emphasis>-methyltransferase from <Emphasis Type="Italic">Methanohalophilus portucalensis</Emphasis>

To overcome the extracellular salt stress, Methanohalophilus portucalensis FDF1^T synthesizes the compatible solute betaine through the methylation of glycine, sarcosine, and N,N-dimethylglycine. S-adenosylmethionine (AdoMet) is the methyl donor. The enzyme sarcosine dimethylglycine N-methyltransferase (SDMT) of M. portucalensis, that catalyzes the formation of N,N-dimethylglycine and glycine betaine, has been purified and characterized. SDMT, a monomer of 33 kDa with a pI at 5.03, has a narrow substrate specificity limited to using only sarcosine and dimethylglycine as substrates for the methyl transferase reaction. The K _m values for sarcosine and AdoMet were 2.29 and 0.21 mM, respectively, with a V _max of 0.83 μmol/mg-min (k _cat value of 0.44 s⁻¹). The K _m values for dimethylglycine and AdoMet were 3.76 and 0.59 mM, respectively, with a V _max of 4.88 μmol/mg-min (k _cat of 2.68 s⁻¹). A high concentration of the end product betaine (2.0 M) did not affect the SMT activity, but it slightly inhibited the DMT activity. Both activities were also not affected by potassium or sodium ions in concentrations of 200–1,000 mM. We compared this novel archaeal SDMT enzyme to other similar bacterial transferases as well as to the glycine sarcosine dimethylglycine methyltransferase found also in M. portucalensis.     

Molecular characterization of phenylalanine ammonia lyase gene from <Emphasis Type="Italic">Cistanche deserticola</Emphasis>

We cloned the gene, CdPAL1, from Cistanche deserticola callus using RACE PCR with degenerate primers that were designed based on a multiple sequence alignment of known PAL genes from other plant species. The gene shows high homology to other known PAL genes registered in GenBank. The recombinant protein exhibited Michaelis–Menten kinetics with a K _m of 0.1013 mM, V _max of 4.858 μmol min⁻¹, K _cat of 3.36 S⁻¹, and K _cat/K _m is 33,168 M⁻¹ S⁻¹. The enzyme had an optimal pH of 8.5 and an activation energy of 38.92 kJ mol⁻¹ when l-Phenylalanine was used as a substrate; l-tyrosine cannot be used as substrate for this protein. The optimal temperature was 55°C, and the thermal stability results showed that, after a treatment at 70°C for 20 min, the protein retained 87% activity, while a treatment at 75°C for 20 min resulted in a loss of over 85% of the enzyme activity. Treatment with heavy metal ions (Hg²⁺, Pb²⁺, and Zn²⁺) showed remarkable inhibitory effects. Among the intermediates from the lignin (cinnamyl alcohol, cinnamyl aldehyde, coniferyl aldehyde, coniferyl alcohol), phenylpropanoid (cinnamic acid, coumaric acid, caffeic acid, and chlorogenic acid) and phenylethanoid (tyrosol and salidroside) biosynthetic pathways, only cinnamic acid showed strong inhibitory effects against CdPAL1 activity with a K _i of 8 μM. Competitive inhibitor AIP exhibited potent inhibition with K _i = 0.056 μM.     

Expression,purification and characterization of pectate lyase A from <Emphasis Type="Italic">Aspergillus nidulans</Emphasis> in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Pectate lyase A (PelA) of Aspergillus nidulans was successfully expressed in Escherichia coli and effectively purified using a Ni²⁺-nitrilotriacetate-agarose column. Enzyme activity of the recombinant PelA could reach 360 U ml⁻¹ medium. The expressed PelA exhibited its optimum level of activity over the range of pH 7.5–10 at 50°C. Mn²⁺, Ca²⁺, Fe²⁺, Mg²⁺ and Fe³⁺ ions stimulated the pectate lyase activity, but Cu²⁺ and Zn²⁺ inhibited it. The recombinant PelA had a V _max of 77 μmol min⁻¹ mg⁻¹ and an apparent K _m of 0.50 mg ml⁻¹ for polygalacturonic acid. Low-esterified pectin was the optimum substrate for the PelA, whereas higher-esterified pectin was hardly cleaved by it. PelA efficiently macerated mung bean hypocotyls and potato tuber tissues into single cells.     

<Emphasis Type="Italic">In vitro</Emphasis> propagation of northern red oak (<Emphasis Type="Italic">Quercus rubra</Emphasis> L.)

In vitro propagation of northern red oak (Quercus rubra) shoots was successful from cotyledonary node explants excised from 8-wk-old in vitro grown seedlings. Initially, four shoots per explant were obtained on Murashige and Skoog (MS) medium supplemented with 4.4 μM 6-benzylaminopurine (BA), 0.45 μM thidiazuron (TDZ), and 500 mg l⁻¹ casein hydrolysate (CH) with a regeneration frequency of 64.7% after 3 wk. Subculturing explants (after harvesting shoots) to fresh treatment medium significantly increased shoot bud regeneration (16.6 buds per explant), but the buds failed to develop into shoots. A higher percentage (73.3%) of the explants regenerated four shoots per explant on woody plant medium (WPM) supplemented with 4.4 μM BA, 0.29 μM gibberellic acid (GA₃), and 500 mg l⁻¹ CH after 3 wk. Explants subcultured to fresh treatment medium after harvesting shoots significantly increased shoot regeneration (16 shoots per explant). Shoot elongation was achieved (4 cm) when shoots were excised and cultured on WPM supplemented with 0.44 μM BA and 0.29 μM GA₃. In vitro regenerated shoots were rooted on WPM supplemented with 4.9 μM indole-3-butyric acid. A higher percentage regeneration response and shoot numbers per explant were recorded on WPM supplemented with BA and GA₃, than on MS medium containing BA and TDZ. Lower concentrations of BA and GA₃ were required for shoot elongation and prevention of shoot tip necrosis. Each cotyledonary node yielded approximately 20 shoots within 12 wk. Rooted plantlets were successfully acclimatized.     

Desulforubrerythrin from <Emphasis Type="Italic">Campylobacter jejuni</Emphasis>, a novel multidomain protein

A novel multidomain metalloprotein from Campylobacter jejuni was overexpressed in Escherichia coli, purified, and extensively characterized. This protein is isolated as a homotetramer of 24-kDa monomers. According to the amino acid sequence, each monomer was predicted to contain three structural domains: an N-terminal desulforedoxin-like domain, followed by a four-helix bundle domain harboring a non-sulfur μ-oxo diiron center, and a rubredoxin-like domain at the C-terminus. The three predicted iron sites were shown to be present and were studied by a combination of UV–vis, EPR, and resonance Raman spectroscopies, which allowed the determination of the electronic and redox properties of each site. The protein contains two FeCys₄ centers with reduction potentials of +240 mV (desulforedoxin-like center) and +185 mV (rubredoxin-like center). These centers are in the high-spin configuration in the as-isolated ferric form. The protein further accommodates a μ-oxo-bridged diiron site with reduction potentials of +270 and +235 mV for the two sequential redox transitions. The protein is rapidly reoxidized by hydrogen peroxide and has a significant NADH-linked hydrogen peroxide reductase activity of 1.8 μmol H₂O₂ min⁻¹ mg⁻¹. Owing to its building blocks and its homology to the rubrerythrin family, the protein is named desulforubrerythrin. It represents a novel example of the large diversity of the organization of domains exhibited by this enzyme family.     

Heterologous expression and characterization of a recombinant thermostable alkylsulfatase (<Emphasis Type="Italic">sdsAP</Emphasis>)

A novel alkylsulfatase gene, sdsAP, was cloned from a newly isolated bacterium Pseudomonas sp. S9. It encoded a protein of 675 amino acids with a calculated molecular mass of 74.9 kDa. The protein contained a typical N-terminal signal peptide of 41 amino acid residues, followed by a metallo-β-lactamase like domain at the N-terminus and a SCP-2-like domain at the C-terminus. This domain organization mode suggested that it belonged to the type III sulfatase. The mature alkylsulfatase was overexpressed in Escherichia coli. The optimal temperature and pH of the recombinant SdsAP were 70°C and 9.0, respectively. Notably, at optimal conditions, the purified recombinant SdsAP had a high specific activity of 23.25 μmol min⁻¹ mg⁻¹, a K _{m (app)} of 264.3 μmol, and a V _{max (app)} of 33.8 μmol min⁻¹ mg⁻¹ for SDS. Additionally, it still retained more than 90% activity after incubation at 65°C for 1 h, which was much different from other alkylsulfatases reported. The recombinant enzyme hydrolyzed the primary alkyl sulfate such as sodium octyl sulfate and sodium dodecyl sulfate (SDS). It was a Zn²⁺-containing and Ca²⁺ activated alkylsulfatase. This is the first report to explore the various characteristics of the heterologous recombinant alkylsulfatase in details. These favorable properties could make SdsAP attractive to be useful in the degradation of SDS-containing waste.     

Thidiazuron-induced high-frequency direct shoot organogenesis of <Emphasis Type="Italic">Cannabis sativa</Emphasis> L.

Induction of high-frequency shoot regeneration using nodal segments containing axillary buds from a 1-yr-old mother plants of Cannabis sativa was achieved on Murashige and Skoog (MS) medium containing 0.05–5.0 μM thidiazuron. The quality and quantity of regenerants were better with thidiazuron (0.5 μM thidiazuron) than with benzyladenine or kinetin. Adding 7.0 μM of gibberellic acid into a medium containing 0.5 μM thidiazuron slightly increased shoot growth. Elongated shoots when transferred to half-strength MS medium supplemented with 500 mg l⁻¹ activated charcoal and 2.5 μM indole-3-butyric acid resulted in 95% rooting. The rooted plants were successfully acclimatized in soil. Following acclimatization, growth performance of 4-mo-old in vitro propagated plants was compared with ex vitro vegetatively grown plants of the same age. The photosynthesis and transpiration characteristics were studied under different light levels (0, 500, 1,000, 1,500, or 2,000 μmol m⁻² s⁻¹). An increase in photosynthesis was observed with increase in the light intensity up to 1,500 μmol m⁻² s⁻¹ and then decreased subsequently at higher light levels in both types of plants. However, the increase was more pronounced at lower light intensities below 500 μmol m⁻² s⁻¹. Stomatal conductance and transpiration increased with light intensity up to highest level (2000 μmol m⁻² s⁻¹) tested. Intercellular CO₂ concentration (C _i) and the ratio of intercellular CO₂ concentration to ambient CO₂ (C _i/C _a) decreased with the increase in light intensity in both in vitro as well as ex vitro raised plants. The results show that in vitro propagated and hardened plants were functionally comparable to ex vitro plants of same age in terms of gas and water vapor exchange characteristics, within the limits of this study.     

Heterologous expression of polyhydroxyalkanoate depolymerase from <Emphasis Type="Italic">Thermobifida</Emphasis> sp. in <Emphasis Type="Italic">Pichia pastoris</Emphasis> and catalytic analysis by surface plasmon resonance

A polyhydroxyalkanote depolymerase gene from Thermobifida sp. isolate BCC23166 was cloned and expressed as a C-terminal His₆-tagged fusion in Pichia pastoris. Primary structure analysis revealed that the enzyme PhaZ-Th is a member of a proposed new subgroup of SCL-PHA depolymerase containing a proline–serine repeat linker. PhaZ-Th was expressed as two glycosylated forms with apparent molecular weights of 61 and 70 kDa, respectively. The enzyme showed esterase activity toward p-nitrophenyl alkanotes with V _max and K _m of 3.63 ± 0.16 μmol min⁻¹ mg⁻¹ and 0.79 ± 0.12 mM, respectively, on p-nitrophenyl butyrate with optimal activity at 50–55°C and pH 7–8. Surface plasmon resonance (SPR) analysis demonstrated that PhaZ-Th catalyzed the degradation of poly-[(R)-3-hydroxybutyrate] (PHB) films, which was accelerated in (R)-3-hydroxyvalerate copolymers with a maximum degradation rate of 882 ng cm⁻² h⁻¹ for poly[(R)-3-hydroxybutyrate-co-3-hydroxyvalerate] (12 mol% V). Surface deterioration, especially on the amorphous regions of PHB films was observed after exposure to PhaZ-Th by atomic force microscopy. The use of P. pastoris as an alternative recombinant system for bioplastic degrading enzymes in secreted form and a sensitive SPR analytical technique will be of utility for further study of bioplastic degradation.     

Purification and Properties of an <Emphasis Type="Italic">N</Emphasis>-acetylglucosaminidase from <Emphasis Type="Italic">Streptomyces cerradoensis</Emphasis>

An N-acetylglucosaminidase produced by Streptomyces cerradoensis was partially purified giving, by SDS-PAGE analysis, two main protein bands with Mr of 58.9 and 56.4 kDa. The K_m and V_max values for the enzyme using p-nitrophenyl-β-N-acetylglucosaminide as substrate were of 0.13 mM and 1.95 U mg⁻¹ protein, respectively. The enzyme was optimally activity at pH 5.5 and at 50 °C when assayed over 10 min. Enzyme activity was strongly inhibited by Cu²⁺ and Hg²⁺ at 10 mM, and was specific to substrates containing acetamide groups such as p-nitrophenyl-β-N-acetylglucosaminide and p-nitrophenyl-β-D-N,N′-diacetylchitobiose.     

A surfactant tolerant laccase of <Emphasis Type="Italic">Meripilus giganteus</Emphasis>

A laccase (Lcc1) from the white-rot fungus Meripilus giganteus was purified with superior yields of 34% and 90% by conventional chromatography or by foam separation, respectively. Size exclusion chromatography (SEC) and sodium dodecylsulfate-polyacrylamide gel electrophoresis (SDS-PAGE) yielded a molecular mass of 55 kDa. The enzyme possessed an isoelectric point of 3.1 and was able to oxidize the common laccase substrate 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) at a pH of 2.0, whereas the enzyme was still able to oxidize ABTS and 2,6-dimethoxyphenol (DMP) at pH 6.0. Lcc1 exhibited low K _m values of 8 μM (ABTS) and 80 μM (DMP) and remarkable catalytic efficiency towards the non-phenolic substrate ABTS of 37,437 k _cat/k _m (s⁻¹ mM⁻¹). The laccase showed a high stability towards high concentrations of various metal ions, EDTA and surfactants indicating a considerable biotechnological potential. Furthermore, Lcc1 exhibited an increased activity as well as a striking boost of stability in the presence of surfactants. Degenerated primers were deduced from peptide fragments. The complete coding sequence of lcc1 was determined to 1,551 bp and confirmed via amplification of the 2,214 bp genomic sequence which included 12 introns. The deduced 516 amino acid (aa) sequence of the lcc1 gene shared 82% identity and 90% similarity with a laccase from Rigidoporus microporus. The sequence data may aid theoretical studies and enzyme engineering efforts to create laccases with an improved stability towards metal ions and bipolar compounds.     

In vitro production of metabolism-enhancing phytoecdysteroids from <Emphasis Type="Italic">Ajuga turkestanica</Emphasis>

In order to develop a sustainable source of metabolism-enhancing phytoecdysteroids, cell suspension and hairy root cultures were established from shoot cultures of wild-harvested Ajuga turkestanica, a medicinal plant indigenous to Uzbekistan. Precursors of phytoecdysteroids (acetate, mevalonic acid cholesterol) or methyl jasmonate (an elicitor) were added to subculture media to increase phytoecdysteroid accumulation. In cell suspension cultures, 20-hydroxyecdysone (20E) content increased 3- or 2-fold with the addition of 125 or 250 μM methyl jasmonate, respectively, compared to unelicited cultures. Precursor addition, however, did not provoke phytoecdysteroid accumulation. In hairy root cultures, addition of sodium acetate, mevalonic acid, and methyl jasmonate, but not cholesterol, increased phytoecdysteroid content compared to unelicited cultures. Hairy root cultures treated with 150 mg l⁻¹ sodium acetate, or 15 or 150 mg l⁻¹ mevalonic acid, increased 20E content approximately 2-fold to 19.9, 20.4 or 21.7 μg mg⁻¹, respectively, compared to control (10.5 μg mg⁻¹). Older hairy root cultures, extracted after the seventh subculture cycle, also showed increases in 20E content (24.8 μg mg⁻¹), turkesterone (0.9 μg mg⁻¹) and cyasterone (8.1 μg mg⁻¹) compared to control cultures maintained for a shorter duration of four subculture cycles. Doses of 10 or 20 μg ml⁻¹ hairy root extract increased protein synthesis by 25.7% or 31.1%, respectively, in a C2C12 mouse skeletal cell line. These results suggest that sustainable production of metabolically active phytoecdysteroid can be achieved through hairy root culture systems. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Fermentative production of superoxide dismutase with <Emphasis Type="Italic">Kluyveromyces marxianus</Emphasis>

This work sought to develop a fermentative process for the microbial production of superoxide dismutase (SOD), to overcome extraction from animal tissues. Twenty-eight wild-type yeast strains were screened for SOD productivity. Kluyveromyces marxianus L3 showed the highest SOD activity (62 U mg⁻¹) and was used for process development. Oxidative stress conditions and parameters affecting oxygen transfer rate were exploited to improve production. The effects of dilution rate (0.067 vs 0.2 h⁻¹), aeration pressure (0.3 vs 1.2 bar) and H₂O₂ (0 vs 50 mM) were studied during chemostat experiments. Low dilution rate, high pressure and H₂O₂ resulted in an increase in CuZn–SOD up to 475 U mg⁻¹. When a regulation of oxygen saturation was applied during batch cultures, CuZn–SOD was progressively higher at 60, 80 and 90% dissolved oxygen tension (DOT) (250, 330 and 630 U mg⁻¹, respectively). Furthermore, the highest growth rate and biomass yield were achieved at 90% DOT, this being therefore the best DOT condition for high overall productivity. Growth and productivity on different carbon sources were compared. Specific activity was higher on glycerol than on lactose or glucose (496, 454 and 341 U mg⁻¹, respectively). The highest biomass yield was achieved on lactose. It may be therefore the best substrate for SOD production.     

Dynamics of ginsenoside biosynthesis in suspension culture of <Emphasis Type="Italic">Panax quinquefolium</Emphasis>

Biosynthesis of six saponins (ginsenosides) in suspension culture of P. quinquefolium Z₅ was investigated. Ginsenoside content in biomass reached the highest level, nearly 30 mg g⁻¹ d.w., between 25 and 30 days of the culture. Saponins were synthesized simultaneously with cell growth but their synthesis rate was not proportional to the growth rate. During the phase of rapid biomass multiplication, after which biomass reached 90% of its maximum yield, only half examined ginsenosides was produced. The second half of the final saponins yield was produced during the slow growth phase, in which only 10% of biomass was grown. During the intensive growth phase the productivity of six saponins examined per biomass (dry weight) unit was 3.4 μg mg⁻¹ d.w. day⁻¹, however, this parameter calculated for slow growth phase reached nearly 30 μg mg⁻¹ d.w. day⁻¹. There were differences in increase of the contents of six saponins determined in biomass, and it was the highest for saponins Re (20(S)-protopanaxatriol-6-[O-α-l-rhamnopyranosyl(1 → 2)-β-d-glucopyranoside]-20-O-β-d-glucopyranoside) and Rg₁ (20(S)-protopanaxatriol-6,20-di-O-β-d-glucoside).     

Biotechnological production of <Emphasis Type="SmallCaps">l</Emphasis>-ribose from <Emphasis Type="SmallCaps">l</Emphasis>-arabinose

l-Ribose is a rare and expensive sugar that can be used as a precursor for the production of l-nucleoside analogues, which are used as antiviral drugs. In this work, we describe a novel way of producing l-ribose from the readily available raw material l-arabinose. This was achieved by introducing l-ribose isomerase activity into l-ribulokinase-deficient Escherichia coli UP1110 and Lactobacillus plantarum BPT197 strains. The process for l-ribose production by resting cells was investigated. The initial l-ribose production rates at 39°C and pH 8 were 0.46 ± 0.01 g g⁻¹ h⁻¹ (1.84 ± 0.03 g l⁻¹ h⁻¹) and 0.27 ± 0.01 g g⁻¹ h⁻¹ (1.91 ± 0.1 g l⁻¹ h⁻¹) for E. coli and for L. plantarum, respectively. Conversions were around 20% at their highest in the experiments. Also partially purified protein precipitates having both l-arabinose isomerase and l-ribose isomerase activity were successfully used for converting l-arabinose to l-ribose.