Functional expression of the lipase gene Lip2 of <Emphasis Type="Italic">Pleurotus</Emphasis> <Emphasis Type="Italic">sapidus</Emphasis> in <Emphasis Type="Italic">Escherichia</Emphasis> <Emphasis Type="Italic">coli</Emphasis>

The lipase Lip2 of the edible basidiomycete, Pleurotus sapidus, is an extracellular enzyme capable of hydrolysing xanthophyll esters with high efficiency. The gene encoding Lip2 was expressed in Escherichia coli TOP10 using the gene III signal sequence to accumulate proteins in the periplasmatic space. The heterologous expression under control of the araBAD promoter led to the high level production of recombinant protein, mainly as inclusion bodies, but partially in a soluble and active form. A fusion with a C-terminal His tag was used for purification and immunochemical detection of the target protein. This is the first example of a heterologous expression and periplasmatic accumulation of a catalytically active lipase from a basidiomycete fungus.     

Cloning,expression and characterization of a lipase gene (<Emphasis Type="Italic">lip3</Emphasis>) from<Emphasis Type="Italic"> Pseudomonas aeruginosa</Emphasis> LST-03

A lipase gene (lip3) was cloned from the Pseudomonas aeruginosa strain LST-03 (which tolerates organic solvents) and expressed in Escherichia coli. The cloned sequence includes an ORF consisting of 945 nucleotides, encoding a protein of 315 amino acids (Lip3 lipase, 34.8 kDa). The predicted Lip3 lipase belongs to the class of serine hydrolases; the catalytic triad consists of the residues Ser-137, Asp-258, and His-286. The gene cloned in the present study does not encode the LST-03 lipase, a previously isolated solvent-stable lipase secreted by P. aeruginosa LST-03, because the N-terminal amino acid sequence of the Lip3 lipase differs from that of the LST-03 lipase. Although the effects of pH on the activity and stability of the Lip3 lipase, and the temperature optimum of the enzyme, were similar to those of the LST-03 lipase, the relative activity of the Lip3 lipase at lower temperatures (0–35°C) was higher than that of the LST-03 lipase. In the absence of organic solvents, the half-life of the Lip3 lipase was similar to that of the LST-03 lipase. However, in the presence of most of the organic solvents tested in this study (the exceptions were ethylene glycol and glycerol), the stability of the Lip3 lipase was lower than that of the LST-03 lipase.Communicated by H. Ikeda     

Cloning,characterization and expression of the extracellular lipase gene from <Emphasis Type="Italic">Aureobasidium </Emphasis><Emphasis Type="Italic">pullulans</Emphasis> HN2-3 isolated from sea saltern

The extracellular lipase structural gene was isolated from cDNA of Aureobasidium pullulans HN2-3 by using SMART^TM RACE cDNA amplification kit. The gene had an open reading frame of 1245 bp long encoding a lipase. The coding region of the gene was interrupted by only one intron (55 bp). It encodes 414 amino acid residues of a protein with a putative signal peptide of 26 amino acids. The protein sequence deduced from the extracellular lipase structural gene contained the lipase consensus sequence (G-X-S-X-G) and three conserved putative N-glycosylation sites. According to the phylogenetic tree of the lipases, the lipase from A. pullulans was closely related to that from Aspergillus fumigatus (XP_750543) and Neosartorya fischeri (XP_001257768) and the identities were 50% and 52%, respectively. The mature peptide encoding cDNA was subcloned into pET-24a (+) expression vector. The recombinant plasmid was expressed in Escherichia coli BL21(DE3). The expressed fusion protein was analyzed by SDS-PAGE and western blotting and a specific band with molecular mass of about 47 kDa was found. Enzyme activity assay verified the recombinant protein as a lipase. A maximum activity of 0.96 U/mg was obtained from cellular extract of E. coli BL21(DE3) harboring pET-24a(+)LIP1. Optimal pH and temperature of the crude recombinant lipase were 8.0 and 35 °C, respectively and the crude recombinant lipase had the highest hydrolytic activity towards peanut oil.     

Cloning and expression of gene, and activation of an organic solvent-stable lipase from Pseudomonas aeruginosa LST-03

Organic solvent-tolerant Pseudomonas aeruginosa LST-03 secretes an organic solvent-stable lipase, LST-03 lipase. The gene of the LST-03 lipase (Lip9) and the gene of the lipase-specific foldase (Lif9) were cloned and expressed in Escherichia coli. In the cloned 2.6 kbps DNA fragment, two open reading frames, Lip9 consisting of 933 nucleotides which encoded 311 amino acids and Lif9 consisting of 1,020 nucleotides which encoded 340 amino acids, were found. The overexpression of the lipase gene (lip9) was achieved when T7 promoter was used and the signal peptide of the lipase was deleted. The expressed amount of the lipase was greatly increased and overexpressed lipase formed inclusion body in E. coli cell. The collected inclusion body of the lipase from the cell was easily solubilized by urea and activated by using lipase-specific foldase of which 52 or 58 amino acids of N-terminal were deleted. Especially, the N-terminal methionine of the lipase of which the signal peptide was deleted was released in E. coli and the amino acid sequence was in agreement with that of the originally-produced lipase by P. aeruginosa LST-03. Furthermore, the overexpressed and solubilized lipase of which the signal peptide was deleted was more effectively activated by lipase-specific foldase.     

Acidic lipase Lip I.3 from a Pseudomonas fluorescens‐like strain displays unusual properties and shows activity on secondary alcohols

Aims

Identification, cloning, expression and characterization of a novel lipase – Lip I.3 – from strain Pseudomonas CR‐611.

Methods and Results

The corresponding gene was identified and isolated by PCR‐amplification, cloned and expressed in Escherichia coli, and purified by refolding from inclusion bodies. Analysis of the deduced amino acid sequence revealed high homology with members of the bacterial lipase family I.3, showing 97% identity to a putative lipase from Pseudomonas fluorescens Pf0‐1, and 93% identity to a crystallized extracellular lipase from Pseudomonas sp. MIS38. A typical C‐terminal type I secretion signal and several putative Ca²⁺ binding sites were also identified. Experimental data confirmed that Lip I.3 requires Ca²⁺ ions for correct folding and activity. The enzyme differs from the previously reported family I.3 lipases in optimal pH, being the first acidophilic lipase reported in this family. Furthermore, Lip I.3 shows a strong preference for medium chain fatty acid esters and does not display interfacial activation. When tested for activity on secondary alcohol hydrolysis, Lip I.3 displayed higher efficiency on aromatic alcohols rather than on alkyl alcohols.

Conclusions

A new family I.3 lipase with unusual properties has been isolated, cloned and described. This will contribute to a better knowledge of family I.3 lipases, a family that has been scarcely explored, and that might provide a novel source of biocatalysts.

Significance and Impact of the Study

The unusual properties shown by Lip I.3 and the finding of activity and enantioselectivity on secondary alcohol esters may contribute to the development of new enzymatic tools for applied biocatalysis.     

The cold-active Lip1 lipase from the Antarctic bacterium Pseudoalteromonas haloplanktis TAC125 is a member of a new bacterial lipolytic enzyme family

The genome of the Antarctic bacterium Pseudoalteromonas haloplanktis TAC125 was searched for the presence of genes encoding ester-hydrolysing enzymes. Amongst the others, the gene PSHAa0051 coding for a putative secreted esterase/lipase was selected. The psychrophilic gene was cloned, functionally over-expressed in P. haloplanktis TAC125, and the recombinant product (after named PhTAC125 Lip1) was purified. PhTAC125 Lip1 was found to be associated to the outer membrane and exhibited higher enzymatic activity towards synthetic substrates with long acyl chains. A structural model was constructed using the structure of carboxylesterase Est30 from Geobacillus stearothermophilus as template. The model covered the central part of the protein with the exceptions of PhTAC125 Lip1 N- and C-terminal regions, where the psychrophilic protein displays extra-domains. The constructed model showed a typical α/β-hydrolase fold, and confirmed the presence of a canonical catalytic triad consisting of Ser, Asp and His. The sequence analysis showed that PhTAC125 Lip1 is distantly related to other lipolytic enzymes, but closely related to other putative psychrophilic esterases/lipases. The aligned proteins share common features, such as: (1) a conserved new active-site pentapeptide motif (LGG(F/L/Y)STG); (2) the likely extra-cytoplasmic localization, (3) the absence of a typical calcium-binding pocket, and (4) the absence of a canonical lid. These observations strongly suggest that aligned proteins constitute a novel lipase family, typical of psychrophilic marine γ-proteobacteria, and PhTAC125 Lip1 could be considered the first characterised member of this family. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. D. de Pascale and A. M. Cusano equally contributed to the work.     

Characterization of a novel lipase and its specific foldase from Acinetobacter sp. XMZ-26

A novel operon containing a lipase gene (lip26) and its specific foldase gene (lif26) was discovered from Acinetobacter sp. XMZ-26 by creating and screening a gene library and then using genome walking. The amino acid sequence of Lip26 and Lif26 showed only 46.4% and 37.3% identity with the LipA and LipB (Lif) sequences from Acinetobacter sp. SY-01, respectively. The expressed recombinant Lip26 formed inactive inclusion bodies in Escherichia coli. However, the active Lip26 was refolded by the dilution refolding method with the assistance of purified recombinant Lif26, and the refolded Lip26 had a high specific activity. Lip26 hydrolyzed p-nitrophenyl (pNP) esters of fatty acids with C₂ to C₁₆ acyl chain lengths and had a substrate preference for pNP myristate. Maximal Lip26 activity was dependent on both the temperature (55 °C) and pH (9.0). In addition, Lip26 was capable of maintaining its activity in the presence of many detergents and organic solutions, and its activity was enhanced by the presence of Ca²⁺, Mn²⁺, and Ba²⁺. To directly obtain active Lip26, an E. coli strain was co-transformed with two expression plasmids containing the lip26 and lif26 genes. The co-expression of both proteins in vivo resulted in the expression of half of the recombinant Lip26 as a soluble protein with demonstrable lipase activity. A direct protein interaction between Lif26 and Lip26A was detected by both a pull-down assay and a yeast two-hybrid experiment.     

A novel β-glucosidase with lipolytic activity from a soil metagenome

Moonlighting proteins have two different functions within a single polypeptide chain. Exploring moonlighting enzymes from the environment using the metagenomic approach is interesting. In the present study, a novel β-glucosidase gene, designated as bgl1D, with lipolytic activity (renamed Lip1C) was cloned through function-based screening of a metagenomic library from uncultured soil microorganisms. The deduced amino acid sequence comparison and phylogenetic analysis also indicated that Lip1C and other putative lipases are closely related. Biochemical characterization demonstrated that the maximum activity of the recombinant Lip1C protein occurs at pH 8.0 and 30°C using 4-nitrophenyl butyrate as substrate. The putative lipase had an apparent K _m value of 0.88 mmol/L, a k _cat value of 212/min, and a k _cat/K _m value of 241 L/mmol/min. Lip1C exhibited habitat-specific characteristics with 5 mmol/L AlCl₃, CuCl₂, and LiCl. The characterization of the biochemical properties of Lip1C enhances our understanding of this novel moonlighting enzyme isolated from a soil metagenome.     

Surface display of active lipase in <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> using Cwp2 as an anchor protein

Lipase Lip2 from Yarrowia lipolytica was displayed on the cell surface of Saccharomyces cerevisiae using Cwp2 as an anchor protein. Successful display of the lipase on the cell surface was confirmed by immunofluorescence microscopy and halo assay. The length of linker sequences was further examined to confirm that the correct conformation of Lip2 was maintained. The results showed that the displayed Lip2 exhibited the highest activity at 7.6 ± 0.4 U/g (dry cell) when using (G₄S)₃ sequence as the linker, with an optimal temperature and pH at 40°C and pH 8.0. The displayed lipase did not lose any activity after being treated with 0.1% Triton X-100 and 0.1% Tween 80 for 30 min, and it retained 92% of its original activity after incubation in 10% DMSO for 30 min. It also exhibited better thermostability than free Lip2 as reported previously.     

带His-tag的解脂耶氏酵母脂肪酶Lip2在毕赤酵母中的表达及纯化

将去自身信号肽并且N-端带6×His标签的YlLip2基因克隆至表达载体pPIC9K中,电转化GS115获得高效表达脂肪酶His₆-YlLip2的基因工程菌。筛选到的阳性克隆子摇瓶发酵脂肪酶活力最高为400U/ml。对重组毕赤酵母在10 L发酵罐中表达His₆-YlLip2的分批补料发酵工艺进行了初步优化,探讨了培养基、pH、温度对生物量和重组蛋白表达量的影响。结果表明:采用FM22培养基,诱导温度为25℃,pH 5.0,甲醇诱导114 h后His₆-YlLip2的最高酶活力达到3160U/ml。SDS-PAGE分析表明,蛋白的分子量大约为38kDa。重组的His₆-YlLip2经镍柱一步纯化后的纯度达到95.43%,比酶活达到4250U/mg。     

Enhancing Functional Expression of Heterologous <Emphasis Type="Italic">Burkholderia</Emphasis> Lipase in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Functional expression of lipase from Burkholderia sp. C20 (Lip) in various cellular compartments of Escherichia coli was explored. The poor expression in the cytoplasm of E. coli was improved by several strategies, including coexpression of the cytoplasmic chaperone GroEL/ES, using a mutant E. coli host strain with an oxidative cytoplasm, and protein fusion technology. Fusing Lip with the N-terminal peptide tags of T7PK, DsbA, and DsbC was effective in enhancing the solubility and biological activity. Non-fused Lip or Lip fusions heterologously expressed in the periplasm of E. coli formed insoluble aggregates with a minimum activity. Biologically active and intact Lip was obtained upon the secretion into the extracellular medium using the native signal peptide and the expression performance was further improved by coexpression of the periplasmic chaperon Skp. The extracellular expression was even more effective when Lip was secreted as a Lip–HlyA fusion via the α-hemolysin transporter. Finally, Lip could be functionally displayed on the E. coli cell surface when fused with the carrier EstA.     

Novel Strategy of Using Methyl Esters as Slow Release Methanol Source during Lipase Expression by mut+ Pichia pastoris X33

One of the major issues with heterologous production of proteins in Pichia pastoris X33 under AOX1 promoter is repeated methanol induction. To obviate repeated methanol induction, methyl esters were used as a slow release source of methanol in lipase expressing mut⁺ recombinant. Experimental design was based on the strategy that in presence of lipase, methyl esters can be hydrolysed to release their products as methanol and fatty acid. Hence, upon break down of methyl esters by lipase, first methanol will be used as a carbon source and inducer. Then P. pastoris can switch over to fatty acid as a carbon source for multiplication and biomass maintenance till further induction by methyl esters. We validated this strategy using recombinant P. pastoris expressing Lip A, Lip C from Trichosporon asahii and Lip11 from Yarrowia lipolytica. We found that the optimum lipase yield under repeated methanol induction after 120 h was 32866 U/L, 28271 U/L and 21978 U/L for Lip C, Lip A and Lip 11 respectively. In addition, we found that a single dose of methyl ester supported higher production than repeated methanol induction. Among various methyl esters tested, methyl oleate (0.5%) caused 1.2 fold higher yield for LipA and LipC and 1.4 fold for Lip11 after 120 h of induction. Sequential utilization of methanol and oleic acid by P. pastoris was observed and was supported by differential peroxisome proliferation studies by transmission electron microscopy. Our study identifies a novel strategy of using methyl esters as slow release methanol source during lipase expression.     

<Emphasis Type="Italic">Aspergillus niger</Emphasis> lipase: gene cloning,over-expression in <Emphasis Type="Italic">Escherichia coli</Emphasis> and in vitro refolding

From the N-terminal amino acid sequence of the lipase from Aspergillus niger F044, a potential homologous gene A84689 to the lipanl (the gene encoding the lipase from Aspergillus niger F044) was identified. A pair of primers were designed according to the nucleotide sequence of A84689, and the lipanl was cloned by PCR. Nucleotide sequencing revealed that the lipanl has an ORF of 1,044 bp, containing three introns. The deduced amino acid sequence corresponds to 297 amino acid residues. The cloned cDNA fragment encoding the mature lipase from Aspergillus niger F044 was over-expressed in Escherichia coli BL21(De3) and the recombinant protein was refolded in vitro by dilution followed by DEAE Sepharose Fast Flow chromatography.     

Histopathological characterization and in situ detection of Callinectes sapidus reovirus

A reovirus (tentatively designated as Callinectes sapidus reovirus, CsRV) was found in the blue crabs C. sapidus collected in Chesapeake Bay in 2005. Histological examination of hepatopancreas and gill from infected crabs revealed eosinophilic to basophilic, cytoplasmic, inclusions in hemocytes and in cells of connective tissue. A cDNA library was constructed from total RNA extracted from hemolymph of infected crabs. One clone (designated as CsRV-28) with a 532-bp insert was 75% identical in nucleotide sequence (and 95% similar in translated amino acid sequence) to the quanylytransferase gene of the Scylla serrata reovirus (SsRV). The insert of CsRV-28 was labeled with digoxigenin-11-dUTP and hybridized to sections of hepatopancreas and gill of infected C. sapidus, this probe reacted to hemocytes and cells in the connective tissue. No reaction was seen in any of the tissues prepared from uninfected crabs. Thus, this in situ hybridization procedure can be used to diagnose CsRV.     

解脂耶氏酵母脂肪酶Lip2的表面展示及其酶学性质

表面展示酶作为全细胞催化剂具备诸如能提高酶的稳定性、省去纯化过程、节约成本等优点。脂肪酶是应用最为广泛的工业酶之一。本研究利用酿酒酵母细胞壁蛋白Cwp2作为锚定蛋白,将解脂耶氏酵母脂肪酶Lip2展示在酿酒酵母细胞表面,以制备脂肪酶全细胞催化剂。Lip2被融合到Cwp2的N端,Cwp2通过其C端的GPI锚定信号共价结合到细胞壁上。表面展示的Lip2可以水解三丁酸甘油酯及对硝基苯酚辛酸酯(pNPC),其pNPC水解酶活达到4.6U/g干细胞。作为全细胞催化剂,表面展示的Lip2具备良好的催化特征,其最适温度为40°C,最适pH为8.0,同时还具备良好的有机溶剂稳定性。     

lip2, a novel lipase gene cloned from Aspergillus niger exhibits enzymatic characteristics distinct from its previously identified family member

We have cloned a novel lipase gene, lip2, from Aspergillus niger and expressed it in Escherichia coli. Upon purification of the recombinant Lip2 protein, its properties were characterized. In comparison with a previously identified lipase Lip1, both enzymes are acid lipases (optimal pH <6.5), Ca²⁺-dependent and PMSF-sensitive, but have different molecular weights (35 and 43 kDa), optimal substrate spectra (C10 and C8), optimal reaction temperatures (45 and 50°C) and thermal stability. Circular dichroism spectroscopy revealed that Lip2 contains a typical Ca²⁺-active site. This first report on the cloning of the Lip2 gene and its enzymatic characteristics may greatly facilitate its potential industrial application.     

Cloning and Functional Expression of the Mucrosobin Protein, a β-Fibrinogenase of Trimeresurus mucrosquamatus (Taiwan Habu)

A venom-specific cDNA encoding for a thrombin-like enzyme designated as mucrosobin has been cloned and sequenced from the cDNA library of the venomous gland of Trimeresurus mucrosquamatus. The full-length cDNA of mucrosobin was assembled by oligonucleotide screening and 5′-rapid amplification of cDNA ends. The amino acid sequence deduced from the cDNA consists of 257 amino acid residues with a putative signal peptide of 24 residues. It is highly homologous to the other thrombin-like enzymes (batroxobin, mucofirase, and calobin), suggesting that it is a serine proteinase with a conserved catalytic triad of His⁴¹, Asp⁸⁴ and Ser¹⁷⁹ in the deduced form of mucrosobin protein. Northern blot analysis revealed that the mucrosobin gene encodes an mRNA of 1.5 kb and suggested a tissue-specific expression in the venomous gland. In an effort to study the biological property of mocrosobin, we have expressed the 28-kDa protein as inclusion bodies in Escherichia coli. For analyzing enzymatic activity, the inclusion bodies were solubilized and the recombinant protein was refolded with a two-step dialysis protocol. The refolded recombinant protein exhibited a specific β-fibrinogenolytic activity. This study offers a possibility of using genetic engineering to acquirie a functional snake venom protein with therapeutic potential.     

Effect of the leader sequence on the expression of recombinant C. rugosa lipase by S. cerevisiae cells

Summary The Candida rugosa lipase I gene has been expressed in Saccharomyces cerevisiae. The recombinant lipase was efficiently synthesized only following the replacement of the enzyme endogenous leader sequence with the signal peptide of the Kluyveromyces lactis killer toxin. Amount of accumulated lipase was about 10–20 mg/l in batch culture and over 1g/l in a computer-controlled fed-batch fermentation system.     

Chaperone-dependent gene expression of organic solvent-tolerant lipase from Pseudomonas aeruginosa strain S5

The gene coding for the intracellular organic solvent-tolerant lipase of Pseudomonas aeruginosa strain S5 was isolated from a genomic DNA library and cloned into pRSET. The cloned sequence included two open reading frames (ORF) of 1575 bp for the first ORF (ORF1), and 582 bp for the second ORF (ORF2). The ORF2, known as chaperone, plays an important role in the expression of the S5 gene. The ORF2 is located downstream of lipase gene, and functions as the act gene for ORF1. The conserved pentapeptide, Gly-X-Ser-X-Gly, is located in the ORF1. A sequence coding for a catalytic triad that resembles that of a serine protease, consisting of serine, histidine, and aspartic acid or glutamic acid residues, was present in the lipase gene. Expression of the S5 lipase gene in E. coli resulted in a 100-fold increase in enzyme activity 9 h after induction with 0.75 mM IPTG. The recombinant protein revealed a size of 60 kDa on SDS-PAGE. The Lip S5 gene was stable in the presence of 25% (v/v) n-dodecane and n-tetradecane after 2 h incubation at 37 °C.     

Cloning of a novel lipase gene, <Emphasis Type="Italic">lipJ08,</Emphasis> from <Emphasis Type="Italic">Candida rugosa</Emphasis> and expression in <Emphasis Type="Italic">Pichia pastoris</Emphasis> by codon optimization

A novel lipase gene, lipJ08, was cloned from Candida rugosa ATCC14830, along with the already reported five lipase genes (lip1–lip5). Nucleotide sequencing indicated that the lipJ08 gene contains a 1650 bp open reading frame (ORF) without introns. The deduced amino acid sequence corresponds to 534 amino acid residues, including a putative signal sequence of 15 amino acid residues. Seventeen of the non-universal serine codons (CTG) of lipJ08 were converted into universal serine codons (TCT) by PCR-based mutagenesis. The native and codon-optimized lipJ08 genes were expressed in Pichia pastoris. The hydrolytic activity of the recombinant LIPJ08 was 4.7 U/ml, whereas the activity of the recombinant wild-type lipase could not be detected.