Optimization of subtractive hybridization in construction of subtractive cDNA libraries

The efficiency of subtraction, integrity of residual single-stranded cDNA, and efficient recovery of nanogram quantities of double-stranded cDNA are the three most important factors affecting quality of subtractive hybridization reactions prior to subtractive cDNA library construction. Techniques for efficient isolation of single-stranded cDNA, after subtraction, have greatly improved from early protocols based on hydroxylapatite chromatography to phenol-chloroform extraction of biotin-streptavidin-crosslinked polynucleotides or oligo(dA)-cellulose affinity chromatography. Factors affecting mRNA stability at the hybridization step, however, also have consequences that directly affect the complexity of the library and the length of cDNAs recovered. We have optimized the subtractive hybridization step in subtractive cDNA library construction to ensure that single-stranded cDNAs survive hybridization as near to full length as possible. These improvements have enabled successful construction of subtractive cDNA libraries from the nanogram quantities of single-stranded cDNA remaining after extensive liquid hybridization to high calculated C_ot values.     

Differential cDNA cloning by enzymatic degrading subtraction (EDS).

We describe a new method, called enzymatic degrading subtraction (EDS), for the construction of subtractive libraries from PCR amplified cDNA. The novel features of this method are that i) the tester DNA is blocked by thionucleotide incorporation; ii) the rate of hybridization is accelerated by phenol-emulsion reassociation; and iii) the driver cDNA and hybrid molecules are enzymatically removed by digestion with exonucleases III and VII rather than by physical partitioning. We demonstrate the utility of EDS by constructing a subtractive library enriched for cDNAs expressed in adult but not in embryonic rat brains.     

Plasmodium falciparum: generation of a cDNA library enriched in sporozoite-specific transcripts by directional tag subtractive hybridization

We have adapted the "directional tag subtractive hybridization" technique as a means of investigating stage-specific gene expression in Plasmodium falciparum. This technique utilizes unidirectional cDNA libraries cloned into separate lambda vectors and involves hydroxyapatite chromatographic separation of target antisense cDNA and driver sense strand cRNA followed by PCR amplification of cDNA sequences specific to the target stage. This technique enabled efficient subtraction of asexual blood stage sequences from a P. falciparum sporozoite cDNA library and led to identification of novel sporozoite sequences. This technique can be applied to study gene expression in parasite stages that are difficult to obtain routinely.     

Phage lambda cDNA cloning vectors for subtractive hybridization, fusion-protein synthesis and Cre-loxP automatic plasmid subcloning

We describe the construction and use of two classes of cDNA cloning vectors. The first class comprises the lambda EXLX(+) and lambda EXLX(-) vectors that can be used for the expression in Escherichia coli of proteins encoded by cDNA inserts. This is achieved by the fusion of cDNA open reading frames to the T7 gene 10 promoter and protein-coding sequences. The second class, the lambda SHLX vectors, allows the generation of large amounts of single-stranded DNA or synthetic cRNA that can be used in subtractive hybridization procedures. Both classes of vectors are designed to allow directional cDNA cloning with non-enzymatic protection of internal restriction sites. In addition, they are designed to facilitate conversion from phage lambda to plasmid clones using a genetic method based on the bacteriophage P1 site-specific recombination system; we refer to this as automatic Cre-loxP plasmid subcloning. The phage lambda arms, lambda LOX, used in the construction of these vectors have unique restriction sites positioned between the two loxP sites. Insertion of a specialized plasmid between these sites will convert it into a phage lambda cDNA cloning vector with automatic plasmid subcloning capability.     

A family of lambda phage cDNA cloning vectors, lambda SWAJ, allowing the amplification of RNA sequences

This paper describes the construction and characterization of a family of lambda phage cDNA cloning vectors that allows high-efficiency directional cDNA cloning and selective amplification of either sense or antisense cRNA sequences. These vectors contain several unique restriction sites (EcoRI, XbaI, and SacI) positioned between two specific phage promoters, SP6 and T7. This system facilitates the in vitro preparation of single-stranded (ss) RNA molecules that should be useful in subtractive hybridization and in situ hybridization procedures. Using subtractive hybridization and this vector system, it should be possible to identify sequences present in one cDNA library and not another. In addition, it should be possible to construct subtracted cDNA libraries in these vectors and to generate high specific activity, ss, antisense cRNA probes directly from DNA prepared from the whole subtracted library or from individual clones.     

溶藻弧菌诱导凡纳滨对虾消减文库的构建及其表达序列标签分析

利用抑制消减杂交技术构建了溶藻弧菌(Vibrio alginolyticus)诱导的凡纳滨对虾(Litopenaeus vannamei)血淋巴细胞cDNA文库。用DNAMAN5.2.2软件对560条高质量的ESTs进行聚类,共获得239个Unigenes。与GenBank进行BLASTx和BLASTn同源比较,其中66.9%为已知功能基因,33.1%为未知功能基因,GO分类将其分为7类,包括能量和基础代谢类相关的基因为第一大类占36%,免疫相关基因占15%,其他基因占8%,信号转导类占3%,抗氧化酶和凋亡相关蛋白均为2%,核蛋白类占1%。实验结果表明凡纳滨对虾在溶藻弧菌诱导下可产生一系列特异基因的表达,通过对文库的分析显示,基于PCR方法建立的SSH文库为取得大量免疫相关基因的ESTs序列提供了可能。       

Prokaryotic Suppression Subtractive Hybridization PCR cDNA Subtraction, a Targeted Method To Identify Differentially Expressed Genes

Molecular biology tools can be used to monitor and optimize biological treatment systems, but the application of nucleic acid-based tools has been hindered by the lack of available sequences for environmentally relevant biodegradation genes. The objective of our work was to extend an existing molecular method for eukaryotes to prokaryotes, allowing us to rapidly identify differentially expressed genes for subsequent sequencing. Suppression subtractive hybridization (SSH) PCR cDNA subtraction is a technique that can be used to identify genes that are expressed under specific conditions (e.g., growth on a given pollutant). While excellent methods for eukaryotic SSH PCR cDNA subtraction are available, to our knowledge, no methods previously existed for prokaryotes. This work describes our methodology for prokaryotic SSH PCR cDNA subtraction, which we validated using a model system: Pseudomonas putida mt-2 degrading toluene. cDNA from P. putida mt-2 grown on toluene (model pollutant) or acetate (control substrate) was subjected to our prokaryotic SSH PCR cDNA subtraction protocol to generate subtraction clone libraries. Over 90% of the sequenced clones contained gene fragments encoding toluene-related enzymes, and 20 distinct toluene-related genes from three key operons were sequenced. Based on these results, prokaryotic SSH PCR cDNA subtraction shows promise as a targeted method for gene identification.     

Full-Length Normalization Subtractive Hybridization: A Novel Method for Generating Differentially Expressed cDNAs

Here we present a novel method termed full-length normalization subtractive hybridization (FNSH) for efficiently generating subtracted cDNA libraries with a high degree of productivity. This method has the ability to isolate full-length differentially expressed genes from target samples. Normalization and subtraction of FNSH are performed simultaneously with efficiency equal to or even higher than that of suppression subtractive hybridization. Using FNSH, we have isolated at least 40 unique cDNAs that are expressed in terminal ampullae but not in the ovaries of the prawn Macrobrachium rosenbergii from 120 randomly picked subtracted clones. Sequence analysis shows that 37 of the 40 cDNAs are full length.     

An improved method for subtractive cloning of differentially expressed genes in higher plants by protective exonuclease digestion and discriminating PCR amplification

An improved method for subtractive cloning with enhanced efficiency was developed by modifying the enzymatic degrading subtraction. The thionucleotide-modified tester cDNA fragments under control of one linker-primer were hybridized with excess driver cDNA fragments flanked by the other distinct linker-primer. After selective digestion of incompletely protected tester/driver and of unprotected driver/driver molecules with exonuclease III and VII, the protected tester/tester reassociates due to thionucleotides were exclusively amplified by PCR with the tester-cDNA-specific primer. The subtractively enriched target cDNA fragments, showing distinct bands in an agarose gel, were inserted into pUC19, and random colonies with inserts were screened by Northern hybridization to tester and driver RNA. Four distinct clones were confirmed to be up-regulated by the withdrawal of potassium from the nutrient solution of seedling barley growing hydroponically. The original protocol generated only smeared amplicons due to non-selective PCR amplification of the hybridized cDNA mixture including remains of undigested driver cDNA.Abbreviations EDS Enzymatic degrading subtraction - SET Subtractively enriched target     

Complementary DNA libraries

The generation of complete and full-length cDNA libraries for potential functional assays of specific gene sequences is essential for most molecules in biotechnology and biomedical research. The field of cDNA library generation has changed rapidly in the past 10 yr. This review presents an overview of the method available for the basic information of generating cDNA libraries, including the definition of the cDNA library, different kinds of cDNA libraries, difference between methods for cDNA library generation using conventional approaches and a novel strategy, and the quality of cDNA libraries. It is anticipated that the high-quality cDNA libraries so generated would facilitate studies involving genechips and the microarray, differential display, subtractive hybridization, gene cloning, and peptide library generation.     

Solid phase subtractive cloning in differentially expressed genes identification

We developed an array-based subtractive hybridization system for one-step high-throughput subtraction. We printed subtractor RNA up to 10.000 times obtaining an excellent contact surface using a little amount of RNA. During hybridization cDNA, common to subtractor and target samples, remains attached to slide immobilized RNA, leaving free in solution target specific cDNA which after retrieval is cloned.     

Subtraction hybridization cDNA libraries from colon carcinoma and hepatic cancer

cDNA clones of differentially expressed mRNAs in a colon carcinoma and a hepatocellular carcinoma have been isolated by subtractive cDNA cloning. The subtracted material is at least 90 X enriched for differentially expressed sequences and can be used for construction of subtractive cDNA libraries and polymerase chain reaction (PCR) amplification to generate differential probes. Commercially available lambda ZAP II is used for construction of primary libraries since single-stranded phage bearing the cloned cDNA can be excised in vivo and because lambda libraries are convenient for subsequent screening and manipulations. Rare mRNAs (less than 0.01% abundance), which are differentially expressed, can be isolated utilizing this procedure.     

Size-selection of cDNA libraries for the cloning of cDNAs after suppression subtractive hybridization

Here we describe the establishment of size-selected cDNA libraries for the cloning of full-length cDNAs that were initially identified by suppression subtractive hybridization (SSH) technology as being differentially expressed. First, the SSH-cDNA fragments were used as 32P-probes to verify their level and differential pattern of expression by virtual Northern and to establish their corresponding full-length cDNA size. Second, cDNAs were separated by size on agarose gels and used to construct size-selected cDNA plasmid libraries, which were then screened by colony hybridization with the SSH-cDNA fragments. We conclude that the described approach complements SSH technology by allowing efficient cloning and characterization of the corresponding full-length cDNA from any desired cell type or species. This approach will give researchers the ability to specifically target and study differentially expressed genes in an efficient manner for functional genomic studies.     

鼻咽癌上皮细胞株HNE1差异表达基因的分离与鉴定

为了分离鼻咽癌差异表达基因 ,应用抑制性扣除杂交技术 ,在正向抑制性扣除杂交中 ,以鼻咽癌上皮细胞株HNE1cDNA作为检测子 ,以人胚鼻咽上皮细胞cDNA作为驱赶子 ;在反向抑制性扣除杂交中 ,以人胚鼻咽上皮细胞cDNA作为检测子 ,以鼻咽癌上皮细胞株HNE1cDNA作为驱赶子 ,分别通过抑制性扣除杂交 ,构建了鼻咽癌上皮细胞株HNE1表达下调和表达上调的两个扣除cDNA文库 .从鼻咽癌相关的扣除cDNA文库中随机挑取 1 2 0 0个克隆 ,采用菌落PCR扩增其插入cDNA片段 ,自动点膜制备成cDNA微阵列膜 ,分别用鼻咽癌上皮细胞株HNE1、人胚鼻咽上皮mRNA经逆转录标记cDNA探针 ,分别与cDNA微阵列膜杂交 ,通过杂交信号的自动扫描分析 ,对杂交信号存在 5倍差异的克隆进行测序 ,获得了 1 0个鼻咽癌差异表达基因的cDNA片段 ,其中 3个为新基因序列 ,其GenBank登录号为 :AF5 1 0 1 88、AF5 1 0 1 89和AF5 1 0 1 90 ,7个代表已知基因序列 .采用RT PCR证实S1 0 0A8,CK1 9和RBP1基因在人胚鼻咽上皮中高表达而在鼻咽癌细胞株HNE1中低表达 .这些结果显示上述基因可能是鼻咽癌发生的重要因素