Rate of beta-structure formation in polypeptides

An explanation is suggested for why a marginally stable beta-structure folds extremely slowly; it is predicted that even a small increase in stability drastically accelerates beta-folding. According to the theory, this folding is a first-order phase transition, and the rate-limiting step is nucleation. The rate-determining "nucleus" (transition state) is the smallest beta-sheet that is sufficiently large to provide an overall free energy reduction during subsequent folding. If the stability of the beta-structure is low, the nucleus is large and possesses a high free energy due to having a large perimeter. When the net stability of the final beta-structure increases (due to either an increase of the beta-sheet stability or a decrease in stability of the competing structures, e.g., alpha-helices), the size and energy of a nucleus decrease and the rate of folding increases exponentially. This must result in a fast folding of polypeptides enriched by beta-forming residues (e.g., protein chains). The theory is developed for intramolecular beta-structure, but it can also explain the overall features of intermolecular beta-folding; it is applicable both to antiparallel and parallel beta-sheets. The difference in folding of beta-sheets, alpha-helices, and proteins is discussed.     

Conformational analysis of the right-hand twisted antiparallel beta-structure

The conformational analysis of a pair of two-linked peptide units in the anti-parallel arrangement is reported here with a view to study the effect of association of one chain with the other. The pair of two-linked peptide units were fixed in space through the hydrogen bonds between them, in accordance with certain hydrogen bond criteria. Model building was undertaken to ascertain whether the proximity of the side-chains could be used to eliminate any one of the right-hand twisted, left-hand twisted or regular beta-structures. Stereochemically, it was found possible with all of them. The preference for a right-hand twisted beta-structure, however, was indicated by the classical energy calculations. The relevance of the results thus obtained is discussed in the context of the preferential right-hand twist of the beta-pleated sheets present in globular proteins. The agreement between the minimum energy conformations obtained for the pair of two-linked peptide units and the globular protein data is also indicated.     

Thermodynamics of alpha- and beta-structure formation in proteins

An atomic protein model with a minimalistic potential is developed and then tested on an alpha-helix and a beta-hairpin, using exactly the same parameters for both peptides. We find that melting curves for these sequences to a good approximation can be described by a simple two-state model, with parameters that are in reasonable quantitative agreement with experimental data. Despite the apparent two-state character of the melting curves, the energy distributions are found to lack a clear bimodal shape, which is discussed in some detail. We also perform a Monte Carlo-based kinetic study and find, in accord with experimental data, that the alpha-helix forms faster than the beta-hairpin.     

One-dimensional self-assembly of a rational designed beta-structure peptide

Fabricating various nanostructures based on the self-assembly of diverse biological molecules is now of great interest to the field of bionanotechnology. In this study, we report a de novo designed peptide (T1) with a preferential beta-hairpin forming property that can spontaneously assemble into nanofibrils in ultrapure water. The nanofibrils assembled by T1 could grow up to tens of microns in length with a left-handed helical twist and an average height of 4.9 +/- 0.9 nm. Moreover, protofilaments and nucleus structures both with a similar height of 1.4 +/- 0.2 nm were observed during fibrilization as well as via sonication of the mature nanofibrils. A typical conformational transition from random coil to beta-structure was observed in association with the fibrilization. Molecular modeling of T1 assemblies displayed that the beta-hairpin molecules organize in a parallel fashion in which the beta-strands align in an antiparallel fashion and each adjoining beta-strand runs left-handed twist at about 2.9 degrees with respect to the one located before it along the fibrillar axis. It also revealed that the maximum thickness of the assembly intermediate, the helical tape structure, is about 1.4 nm and four tapes can further assemble into a fibril with a diameter of about 4.1 nm. Taken together the results obtained by AFM, CD, and molecular modeling, T1 fibrilization probably undergoes a hierarchy approach, in which the aromatic stacking and the electrostatic interactions between the assembled structures are most likely the two major factors directing the one-dimensional self-assembly. Based on these studies, we propose T1 can be used as a model peptide to investigate the beta-sheet based self-assembly process and could be a potential bioorganic template to develop functional materials.     

Design of a discretely folded mini-protein motif with predominantly beta-structure

Here we report the creation of a predominantly beta-structured mini-protein motif. The design target is based on the naturally occurring toxin hand (TH) motifs that are composed of four disulfide bonds and three loops that form a 'hand'. Analysis and subsequent modification of several generations of mini-proteins produced the final 29-residue mini-protein. The structured motif of this new mini-protein provides insight into the compensatory changes that result in the formation of a tightly packed hydrophobic core in a small, globular beta-structure motif. Additionally, this mini-motif represents a new, distinct surface topology for protein design and a valuable, yet compact, model system for the study of beta-sheet structure in water.     

Pattern recognition of the secondary structure of proteins (alpha-helix and beta-structure)

In this paper, an algorithm for the pattern recognition of secondary structure of proteins is proposed. The procedure simultaneously evaluates the contribution of all the residues of a given peptide to its conformation. By means of the algorithm it is possible to select from a universe of well known proteins the most representative alpha-helix and beta-structure peptides, and to use these peptides, as screening matrices to define the unknown structure of any peptide.     

Oligomeric beta-structure of the membrane-bound HIV-1 fusion peptide formed from soluble monomers

The human immunodeficiency virus type 1 (HIV-1) fusion peptide serves as a useful model system for understanding viral/target cell fusion, at least to the lipid mixing stage. Previous solid-state NMR studies have shown that the peptide adopts an oligomeric beta-strand structure when associated with a lipid and cholesterol mixture close to that of membranes of host cells of the virus. In this study, this structure was further investigated using four different peptide constructs. In aqueous buffer solution, two of the constructs were primarily monomeric whereas the other two constructs had significant populations of oligomers/aggregates. NMR measurements for all membrane-associated peptide constructs were consistent with oligomeric beta-strand structure. Thus, constructs that are monomeric in solution can be converted to oligomers as a result of membrane association. In addition, samples prepared by very different methods had very similar NMR spectra, which indicates that the beta-strand structure is an equilibrium rather than a kinetically trapped structure. Lipid mixing assays were performed to assess the fusogenicities of the different constructs, and there was not a linear correlation between the solution oligomeric state and fusogenicity. However, the functional assays do suggest that small oligomers may be more fusogenic than either monomers or large aggregates.     

Elongation in a beta-structure promotes amyloid-like fibril formation of human lysozyme

To understand the mechanism of amyloid fibril formation of a protein, we examined wild-type and three mutant human lysozymes containing both amyloidogenic and non-amyloidogenic proteins: I56T (amyloidogenic); EAEA, which has four additional residues (Glu-Ala-Glu-Ala-) at the N-terminus located on a beta-structure; and EAEA-I56T, which is an I56T mutant of EAEA. All formed amyloid-like fibrils through an in the increase contents of alpha-helix with increasing concentration of ethanol. The order of propensity for amyloid-like fibril formation in highly concentrated ethanol solution is EAEA-I56T > EAEA > I56T > wild-type. This order is almost the reverse of the order of conformational stability of these proteins, wild-type > EAEA > I56T > EAEA-I56T. The important views in this work are as follows. (i) Artificially modified proteins formed amyloid fibrils in vitro. This means that amyloid formation is a generic property of polypeptide chains. (ii) The amyloidogenic mutation Ile56 to Thr caused the destabilization and promoted fibril formation in the wild-type and EAEA human lysozymes, indicating that instability facilitates amyloid formation. (iii) The mutant protein EAEA human lysozyme had higher propensity for fibril formation than the amyloidogenic mutant protein, indicating that amyloid formation is controlled not only by stability but also by other factors. In this case, appending polypeptide chains to a beta-structure accelerated amyloid formation.     

Stability of the folded-chain beta-structure of a homopolypeptide based on time-resolved potentiometric titrations

The standard free energy change of the unimolecular conversion between the folded-chain beta-structure and random coil of uncharged poly(S-carboxymethyl-L-cysteine) was evaluated from the potentiometric titration curves extrapolated to zero time to reduce the effect of aggregation which occurred at slower rates than chain folding for most degrees of ionization. To reduce the remaining contribution from the aggregation, the results obtained at finite concentrations were further extrapolated to zero polymer concentration. A value of -(400 +/- 100) cal/mol was obtained for a sample of chain length 630. From the titration curves at the aggregation equilibrium, the total free energy change of the whole solution associated with the same conversion was determined. The contribution made by aggregation to the stability was determined from the difference between these two quantities, which turned out to be comparable with that from the unimolecular conversion.     

Estimation of beta-structure content of proteins by means of deconvolved FTIR spectra

Fourier self-deconvolution was applied to the infrared spectra of five globular proteins with a high beta-structure content and to the essentially alpha-helical protein hemoglobin. The featureless amide I' bands around 1650 cm-1 were thereby resolved into six to nine components, depending on the protein. Specific components were assigned to the beta-structure segments in each protein. The frequencies and the number of 'beta-bands' differ from one protein to another. The areas of the components were evaluated by means of a Gauss-Newton iteration procedure. It appears that the total area of the beta-bands, as a fraction of the total amide I' band area, reflects the relative beta-structure content of each protein studied.     

Predominance of beta-structure in solubilized zona pellucida from porcine ova

The isolated zona pellucida from porcine ova was effectively solubilized in water at 60 degrees C within one hour. The circular dichroic spectra of zona in water with and without dithiothreitol showed the beta-form. Although sodium dodecyl sulfate partially induced helical structure, the beta-form was considerably retained. These results indicate that the zona glycoproteins have a structure-forming potential for the beta-structure and the hydrogen bonds of the beta-structure stabilize the supramolecular complex of the zona pellucida. The beta-form was also detected in zona solubilized by tryptic digestion. Porcine acrosin, however, did not solubilize the zona.     

Densely packed beta-structure at the protein-lipid interface of porin is revealed by high-resolution cryo-electron microscopy

Porin is an integral membrane protein that forms channels across the outer membrane of Escherichia coli. Electron microscopic studies of negatively stained two-dimensional porin crystals have shown three stain accumulations per porin trimer, revealing the locations of pores spanning the membrane. In this study, reconstituted porin lattices embedded in glucose were investigated using the low-dose technique on a cryo-electron microscope equipped with a helium-cooled superconducting objective lens. The specimen temperature was maintained at 5 K to yield an improved microscopic and specimen stability. Under these conditions, we obtained for the first time electron diffraction patterns from porin lattices to a resolution of 3.2 A and images showing optical diffraction up to a resolution of 4.9 A. Applying correlation averaging techniques to the digitized micrographs, we were able to reconstruct projected images of the porin trimer to a resolution of up to 3.5 A. In the final projection maps, amplitudes from electron diffraction and phases from these images were combined. The predominant feature is a high-density narrow band (about 6 A in thickness) that delineates the outer perimeter of the trimer. Since the molecule consists of almost exclusively beta-sheet structure, as revealed by spectroscopic data, we conclude that this band is a cylindrical beta-pleated sheet crossing the membrane nearly perpendicularly to its plane. Another intriguing finding is a low-density area (about 70 A2) situated in the centre of the trimer.     

The content of alpha-helix and beta-structure in proteins crystallized at different pH values

Using the data of X-ray diffraction analysis for 100 three-dimensional structures of 26 proteins uniformly distributed among three main classes of the alpha-helix-beta-structure classification and without potentially polyanion regions, 154 comparisons of the content of alpha-helix and beta-structure content were made for structures obtained at different pH values of the medium, being distributed in the whole among all these proteins in the range from 1.5 to 12.0. No significant influence of pH of the medium on the size and localization of alpha-helices and beta-strands was found. As a consequence, it is suggested for the protein structure in a crystal that the alpha-helical-beta-structural backbone of protein structures does not depend on pH of the medium, except when the whole protein or its part can become a polyion so that the electrostatic interactions would either hinder or favour the formation of regular structures, and the conformational properties of ionizable amino acids are independent of pH of the medium. It is unclear, whether these assumptions can be extended to the case of solution, because the data for the structures in solution have been obtained for one protein only. These results can be used in investigations of protein structure, in protein engineering, and in the creation of specialized data banks of protein structures.     

The parallel superpleated beta-structure as a model for amyloid fibrils of human amylin

Human amylin is a 37 amino acid residue peptide hormone whose fibrillogenesis has been correlated with type 2 diabetes. These fibrils are rope-like bundles of several 5nm diameter protofilaments. Here, we propose, as a model for the protofilament, a variant of the parallel superpleated beta-structure previously derived for amyloid filaments of the yeast prion Ure2p. In the amylin model, individual polypeptides from residues 9 to 37 have a planar S-shaped fold with three beta-strands. These serpentines are stacked in register, with a 0.47 nm axial rise and a small rotational twist per step, generating an array of three parallel beta-sheets in cross-beta conformation. The interior, the two "bays" sandwiched between adjacent sheets, are occupied by non-polar and by polar/uncharged residues that are predicted to form H-bonded ladders, similar to those found in beta-helical proteins. The N-terminal peptide containing a disulfide bond occupies an extraneous peripheral position in the protofilament. The left-handed twist of the beta-sheets is shown to underlie left-handed coiling of amylin protofilaments in fibrils. The model is consistent with current biophysical, biochemical and genetic data and, in particular, affords a plausible explanation for why rodent amylin does not form fibrils.     

Membrane-embedded C-terminal segment of rat mitochondrial TOM40 constitutes protein-conducting pore with enriched beta-structure

TOM40 is the central component of the preprotein translocase of the mitochondrial outer membrane (TOM complex). We purified recombinant rat TOM40 (rTOM40), which was refolded in Brij35 after solubilization from inclusion bodies by guanidine HCl. rTOM40 (i) consisted of a 63% beta-sheet structure and (ii) bound a matrix-targeted preprotein with high affinity and partially translocated it into the rTOM40 pore. This partial translocation was inhibited by stabilization of the mature domain of the precursor. (iii) rTOM40 bound preprotein initially through ionic interactions, followed by salt-resistant non-ionic interactions, and (iv) exhibited presequence-sensitive, cation-specific channel activity in reconstituted liposomes. Based on the domain structure of rTOM40 deduced by protease treatment, we purified the elastase-resistant and membrane-embedded C-terminal segment (rTOM40(DeltaN165)) as a recombinant protein with 62% beta-structure that exhibited properties comparable with those of full-size rTOM40. We concluded that the membrane-embedded C-terminal half of rTOM40 constitutes the preprotein recognition domain with an enriched beta-structure, which forms the preprotein conducting pore containing a salt-sensitive cis-binding site and a salt-resistant trans-binding site.     

Cytoplasmic domain of human myelin protein zero likely folded as beta-structure in compact myelin

Myelin protein zero (P0 or P0 glycoprotein), the major integral membrane protein in peripheral nervous system myelin, plays a key role in myelin membrane compaction and stability. While the structure of P0 extracellular domain was determined by crystallography, the paucity of any structural data on the highly positive-charged P0 cytoplasmic domain (P0-cyt) has greatly limited our understanding of the mechanism of P0 function. Here, using circular dichroism and intrinsic fluorescence spectroscopy, we attempted to elucidate the structure of human P0-cyt (hP0-cyt) in membrane mimetic environments composed of detergents or lipid vesicles. We found that the secondary structure of P0-cyt was polymorphic—at the lipid/protein ratio corresponding to that of mature peripheral myelin (~50:1), hP0-cyt mainly adopted a β-conformation, whereas when the proportion of lipid increased, the structure underwent a β→α transition. By contrast, the secondary structure of the major isoform of myelin basic protein, another myelin protein with a very large positive charge, remained unchanged across a wide range of lipid/protein ratios. We propose that when hP0-cyt is bound at sufficient concentration to lamellar lipid bilayers such as myelin, it folds into a β-conformation; before this threshold lipid/protein ratio is reached, the domain is α-helical. We suggest that the cytoplasmic apposition (major dense line) in compact myelin may be stabilized via the hydrogen-bonding of β-strands formed as a result of local P0-P0 aggregation.     

Identification and description of beta-structure in horse muscle acylphosphatase by nuclear magnetic resonance spectroscopy

Nuclear magnetic resonance spectra of acylphosphatase were searched for signs of beta-structure, i.e. characteristic nuclear Overhauser enhancement patterns displayed in the two-dimensional spectra, typical chemical shifts, coupling constants and slow 2H-H exchange. The results provided identification of the main-chain resonances of amino acid residues involved in the beta-structure. The full sequential assignment of this region was gained by identification of some amino acid spin systems and their alignment with the primary sequence. The assignment of the side-chains was virtually completed subsequently and a list produced of nuclear magnetic resonance (n.m.r.) constraints derived from the spectra. The beta-structure consists of a beta-sheet with four antiparallel chains, one attached parallel chain, three tight turns and a beta-bulge. The conformation of the beta-sheet was determined by distance geometry calculation using the n.m.r. constraints (174 intraresidual, 107 sequential and 226 long-range distances, 32 torsion angles, phi, and 28 hydrogen bonds) as input. Observation of some interactions between the sheet and previously identified alpha-helical regions made it possible to give an outline of the three-dimensional structure of the enzyme.     

Mutations of tau protein in frontotemporal dementia promote aggregation of paired helical filaments by enhancing local beta-structure

The microtubule-associated protein tau is a natively unfolded protein in solution, yet it is able to polymerize into the ordered paired helical filaments (PHF) of Alzheimer's disease. In the splice isoforms lacking exon 10, this process is facilitated by the formation of beta-structure around the hexapeptide motif PHF6 ((306)VQIVYK(311)) encoded by exon 11. We have investigated the structural requirements for PHF polymerization in the context of adult tau isoforms containing four repeats (including exon 10). In addition to the PHF6 motif there exists a related PHF6* motif ((275)VQIINK(280)) in the repeat encoded by the alternatively spliced exon 10. We show that this PHF6* motif also promotes aggregation by the formation of beta-structure and that there is a cross-talk between the two hexapeptide motifs during PHF aggregation. We also show that two of the tau mutations found in hereditary frontotemporal dementias, DeltaK280 and P301L, have a much stronger tendency for PHF aggregation which correlates with their high propensity for beta-structure around the hexapeptide motifs.     

Sequence-dependence of secondary structure formation: conformational studies of host-guest peptides in alpha-helix and beta-structure supporting media

A newly designed host–guest approach is introduced as a experimental tool to explore the relationship between the sequence of peptides and their secondary structure. From the CD spectra of the host–guest peptides studied, a tentative scale for the α-helix potential in 2,2,2-trifluorethanol of guest amino acids is delineated. The conformational preferences are also examined in β-structure supporting media (solid state, CH₂Cl₂, CH₃OH, H₂O) using ir-absorption and CD techniques. Scales for the β-forming tendency of guest amino acid residues in the different media are delineated. It is shown that the preferred conformation of the host–guest peptides is a function of the medium, the chain length, and the protecting groups. Given the fact that conformational effects are important in peptide synthesis, the tentative scales may serve as a guideline to predict secondary structures of side-chain-protected or -deprotected peptides in a given solvent, complementing the well-known empirical conformational prediction parameters.