Structure of the exopolysaccharide produced by Streptococcus thermophilus S3

The exopolysaccharide of Streptococcus thermophilus S3, produced in skimmed milk, is composed of D-galactose and L-rhamnose in a molar ratio of 2:1. The polysaccharide contains 0.4 equiv of O-acetyl groups per repeating unit. Linkage analysis and 1D/2D NMR (1H and 13C) studies on native and O-deacetylated EPS together with nanoES-CID tandem mass spectrometry studies on oligosaccharides generated by a periodate oxidation protocol, show the polysaccharide to have the following structure: [structure: see text].     

Structural studies of the exopolysaccharide produced by Lactobacillus rhamnosus strain GG (ATCC 53103)

The structure of the extracellular polysaccharide (EPS) from Lactobacillus rhamnosus strain GG has been investigated. In combination with component analysis, NMR spectroscopy shows that the polysaccharide is composed of hexasaccharide repeating units. Sequential information was obtained by two-dimensional (1)H,(1)H-NOESY, and (1)H,(13)C-HMBC NMR techniques. The structure of the repeating unit of the EPS from Lactobacillus rhamnosus strain GG was determined as: [carbohydrate structure: see text]     

Methylobacterium sp. isolated from a Finnish paper machine produces highly pyruvated galactan exopolysaccharide

The slime-forming bacterium Methylobacterium sp. was isolated from a Finnish paper machine and its exopolysaccharide (EPS) was produced on laboratory scale. Sugar compositional analysis revealed a 100% galactan (EPS). However, FT-IR showed a very strong peak at 1611 cm(-1) showing the presence of pyruvate. Analysis of the pyruvate content revealed that, based on the sugar composition, the EPS consists of a trisaccharide repeating unit consisting of D-galactopyranose and [4,6-O-(1-carboxyethylidene)]-D-galactopyranose with a molar ratio of 1:2, respectively. Both linkage analysis and 2D homo- and heteronuclear 1H and 13C NMR spectroscopy revealed the following repeating unit: -->3)-[4,6-O-(1-carboxyethylidene)]-alpha-D-Galp-(1-->3)[4,6-O-(1-carboxyethylidene)]-alpha-D-Galp-(1-->3)-alpha-D-Galp-(1-->. By enrichment cultures from various ground and compost heap samples a polysaccharide-degrading culture was obtained that produced an endo acting enzyme able to degrade the EPS described. The enzyme hydrolysed the EPS to a large extent, releasing oligomers that mainly consisted out of two repeating units.     

Structural studies of an exopolysaccharide produced by Streptococcus thermophilus THS

The structure of an extracellular polysaccharide (EPS) from Streptococcus thermophilus THS has been determined. A combination of component analysis, methylation analysis and NMR spectroscopy shows that the polysaccharide is composed of pentasaccharide repeating units. Sequential information was obtained by two-dimensional (1)H,(1)H-NOESY and (1)H,(13)C-HMBC NMR experiments. NMR data indicate different mobility within the EPS with a stiffer backbone and a more flexible side-chain.     

Structural characterisation and enzymic modification of the exopolysaccharide produced by Lactococcus lactis subsp. cremoris B39

Lactococcus lactis subsp. cremoris B39 grown on whey permeate produced an exopolysaccharide containing L-Rha, D-Gal and D-Glc in a molar ratio of 2:3:2. The polysaccharide was modified using an enzyme preparation from Aspergillus aculeatus, resulting in the release of Gal and a polymer with approximately the same hydrodynamic volume as the native polysaccharide. Linkage analysis and 1H NMR studies of both the native and modified exopolysaccharides elucidated that terminally linked Gal was released during modification and that the chemical structure of the branches within the repeating units is: beta-D-Galp-(1-->4)-beta-D-Glcp-(1-->. 2D NMR experiments (both 1H-1H and 1H-13C) revealed that exopolysaccharide B39 consists of a branched heptasaccharide repeating unit with the following structure: [structure: see text].     

Structural characterisation of the exopolysaccharide produced by Streptococcus thermophilus EU20

Streptococcus thermophilus EU20 when grown on skimmed milk secretes a high-molecular-weight exopolysaccharide that is composed of glucose, galactose and rhamnose in a molar ratio of 2:3:2. Using chemical techniques and 1D and 2D-NMR spectroscopy (1H and 13C) the polysaccharide has been shown to possess a heptasaccharide repeating unit having the following structure: [chemical structure: see text]. Treatment of the polysaccharide with mild acid (0.5 M TFA, 100 degrees C for 1 h) liberates two oligosaccharides; the components correspond to the repeating unit and a hexasaccharide equivalent to the repeating unit minus the terminal alpha-L-Rhap.     

Structure of an acylated exopolysaccharide synthesized by Acinetobacter sp

The complex preparation ethapolan synthesized by Acinetobacter sp. consists of neutral (minor component) and two acidic exopolysaccharides (EPS) one of which is acylated. On the basis of chemical modification of EPS, solvolysis with anhydrous hydrogen fluoride resulting in a penta- and octasaccharide fragments, Smith degradation, 1H- and 13C NMR analysis the following structure of the acylated polysaccharide repeating unit has been established (scheme): It is suggested that in the acylated EPS at least one glucose residue and the galactose residue are O-acylated.     

Introduction of the exopolysaccharide gene cluster from Streptococcus thermophilus Sfi6 into Lactococcus lactis MG1363: production and characterization of an altered polysaccharide

Streptococcus thermophilus Sfi6 produces an exopolysaccharide (EPS) composed of glucose, galactose and N-acetylgalactosamine in the molar ratio of 1:2:1. The genes responsible for the EPS biosynthesis have been isolated previously and found to be clustered in a 14.5 kb region encoding 13 genes. Transfer of this gene cluster into a non-EPS-producing heterologous host, Lactococcus lactis MG1363, yielded an EPS with a similar high molecular weight, but a different structure from the EPS from the native host. The structure of the recombinant EPS was determined by means of 1H homonuclear and 1H-13C heteronuclear two-dimensional nuclear magnetic resonance (NMR) spectra and was found to be --> 3)-beta-D-Glcp-(1 --> 3)-alpha-D-Galp-(1 --> 3)-beta-D-Galp-(1 --> as opposed to --> 3)[alpha-D-Galp-(1 --> 6)]-beta-D-Glcp-(1 --> 3)-alpha-D-GalpNAc-(1 --> 3)-beta-D-Galp-(1 --> for the wild-type S. thermophilus Sfi6. Furthermore, L. lactis MG1363 (pFS101) was also lacking a UDP-N-acetylglucosamine C4-epimerase activity, which would provide UDP-GalNAc for a GalNAc incorporation into the EPS and probably caused the substitution of GalNAc by Gal in the recombinant EPS. This modification implies that (i) bacterial glycosyltransferases could potentially have multiple specificities for the donor and the acceptor sugar molecule; and (ii) the repeating unit polymerase can recognize and polymerize a repeating unit that differs in the backbone as well as in the side-chain from its native substrate.     

Structure elucidation of the O-antigenic polysaccharide from the enteroaggregative Escherichia coli strain 62D1.

The O-antigen polysaccharide of the lipopolysaccharide from the enteroaggregative Escherichia coli strain 62D1 has been determined. Sugar and methylation analysis together with 1H and 13C NMR spectroscopy revealed the components of the repeating unit. Two-dimensional NOESY and heteronuclear multiple-bond correlation experiments were used to deduce the sequence. 1H and 13C NMR spectra indicate heterogeneity in the polysaccharide. Methylation analysis and 1H NMR spectra of native and Smith-degraded material show that the majority (65%) of the repeating units has the following structure: Minor resonances in the NMR spectra are consistent with the presence of repeating units which lack the alpha-d-Galp terminal residue (35%).     

Structure of the high molecular weight exopolysaccharide produced by Bifidobacterium animalis subsp. lactis IPLA-R1 and sequence analysis of its putative eps cluster

The bile adapted strain Bifidobacterium animalis subsp. lactis IPLA-R1 secretes a high molecular weight exopolysaccharide (HMW-EPS) when grown on the surface of agar-MRSC. This EPS is composed of l-rhamnopyranosyl, d-glucopyranosyl, d-galactopyranosyl and d-galactofuranosyl residues in the ratio of 3:1:1:1. Linkage analysis and 1D and 2D NMR spectroscopy were used to show that the EPS has a hexasaccharide repeating unit with the following structure:Treatment of the EPS with mild acid cleanly removed the terminal d-galactofuranosyl residue. The eps cluster sequenced for strain IPLA-R1 showed high genetic homology with putative eps clusters annotated in the genomes of strains from the same species. It is of note that several genes coding for rhamnose-precursors are present in the eps cluster, which could be correlated with the high percentage of rhamnose detected in its EPS repeated unit.     

Structural analysis of the alpha-D-glucan (EPS180) produced by the Lactobacillus reuteri strain 180 glucansucrase GTF180 enzyme

The neutral exopolysaccharide EPS180 produced from sucrose by the glucansucrase GTF180 enzyme from Lactobacillus reuteri 180 was found to be a (1-->3,1-->6)-alpha-D-glucan, with no repeating units present. Based on linkage analysis, periodate oxidation, and 1D/2D 1H and 13C NMR spectroscopy of the intact EPS180, as well as MS and NMR analysis of oligosaccharides obtained by partial acid hydrolysis of EPS180, a composite model, that includes all identified structural features, was formulated as follows: [Formula: see text].     

Structural and immunochemical studies of neutral exopolysaccharide produced by Lactobacillus johnsonii 142

This paper describes the structure of neutral exopolysaccharide (EPS) produced by Lactobacillus johnsonii 142, strain of the lactic acid bacteria isolated from the intestine of mice with experimentally induced inflammatory bowel disease (IBD). Sugar and methylation analyses along with ¹H and ¹³C NMR spectroscopy, including two-dimensional ¹H,¹H COSY, TOCSY, NOESY, and ¹H,¹³C HSQC experiments revealed that the repeating unit of the EPS is a pentasaccharide:→3)-α-d-Galp-(1→3)-β-d-Glcp-(1→5)-β-d-Galf-(1→3)-α-d-Galp-(1→3)-α-d-Galp-(1→The rabbit antiserum raised against whole cells of L. johnsonii 142 reacted with homologous EPS, and cross-reacted with exopolysaccharide from Lactobacillus animalis/murinus 148 isolated also from mice with IBD, but not reacted with EPS of L. johnsonii 151 from healthy mice.     

Characterization of the exopolysaccharide produced by Streptococcus thermophilus 8S containing an open chain nononic acid.

The exopolysaccharide produced by Streptococcus thermophilus 8S in reconstituted skimmed milk is a heteropolysaccharide containing d-galactose, d-glucose, d-ribose, and N-acetyl-d-galactosamine in a molar ratio of 2 : 1 : 1 : 1. Furthermore, the polysaccharide contains one equivalent of a novel open chain nononic acid constituent, 3,9-dideoxy-d-threo-d-altro-nononic acid, ether-linked via C-2 to C-6 of an additional d-glucose per repeating unit. Methylation analysis and 1D/2D NMR studies (1H and 13C) performed on the native polysaccharide, and mass spectrometric and NMR analyses of the oligosaccharide obtained from the polysaccharide by de-N-acetylation followed by deamination and reduction demonstrated the 'hepta'saccharide repeating unit to be: -->4)-alpha-D-Galp-(1-->2)-beta-D-Ribf-(1-->4)-beta-D-Galp-(1-->4)-beta-D-Glcp-(1--7')-Sub-(1-->4)-beta-D-GalpNAc-(1--> in which Sug is 6-O-(3',9'-dideoxy-d-threo-d-altro-nononic acid-2'-yl)-alpha-d-glucopyranose.     

Structural elucidation of the viscous exopolysaccharide produced by Lactobacillus helveticus Lb161

A viscous extracellular polysaccharide produced by Lactobacillus helveticus Lb161 isolated from raw milk has been investigated. Sugar and methylation analysis, and 1H and 13C NMR spectroscopy revealed that the polysaccharide is composed of a heptasaccharide repeating unit. The sequence of sugar residues was determined by use of two-dimensional nuclear Overhauser effect spectroscopy and heteronuclear multiple bond connectivity experiments. The structure of the repeating unit of the exopolysaccharide from L. helveticus Lb161 is as follows: carbohydrate structure [see text]. The polysaccharide contains approximately 0.6 equivalents of O-acetyl group per repeating unit (not located).     

The structure of the exocellular polysaccharide produced by Rhodococcus sp. RHA1

Rhodococcus sp. RHA1 is a Gram-positive actinomycete capable of metabolizing a wide spectrum of organic compounds whose survival in chemically hostile environments is believed to be in part due to the production of an exocellular polysaccharide (EPS). In order to investigate the functional nature of the EPS, its structure was determined using a combinatory approach including hydrolysis, composition, and methylation, analysis methods, as well as 2D (1)H and (13)C NMR spectroscopy. The EPS was found to be a high-molecular-mass polymer of a repeating tetrasaccharide unit composed of D-glucuronic acid, D-glucose, D-galactose, L-fucose and O-acetyl (1:1:1:1:1), and has the structure:     

Structural analysis of the alpha-D-glucan (EPS35-5) produced by the Lactobacillus reuteri strain 35-5 glucansucrase GTFA enzyme

The neutral exopolysaccharide EPS35-5 (reuteran) produced from sucrose by the glucansucrase GTFA enzyme from Lactobacillus reuteri 35-5 was found to be a (1-->4,1-->6)-alpha-D-glucan, with no repeating units present. Based on linkage analysis and 1D/2D 1H and 13C NMR spectroscopy of intact EPS35-5, as well as MS and NMR analysis of oligosaccharides obtained by partial acid hydrolysis and enzymatic hydrolysis, using pullulanase M1 (Klebsiella planticola), of EPS35-5, a composite model, that includes all identified structural elements, was formulated as follows: [Formula: see text].     

Structural elucidation of the EPS of slime producing Brevundimonas vesicularis sp. isolated from a paper machine

The slime forming bacteria Brevundimonas vesicularis sp. was isolated from a paper mill and its EPS was produced on laboratory scale. After production, the exopolysaccharide (EPS) was purified and analysed for its purity and homogeneity, HPSEC revealed one distinct population with a molecular mass of more than 2,000 kDa. The protein content was around 9 w/w%. The sample was analysed to determine its chemical structure. The EPS was found to consist of rhamnose, glucose, galacturonic acid and glucuronic acid. Due to the presence of uronic acids the molar ratio between the four sugars found varies from 3:5:2:4 by sugar composition analyses after methanolysis to 1:1:1:1 found by NMR. A repeating unit with a molecular mass of 678 Da was confirmed by MALDI-TOF mass spectrometry after mild acid treatment. 13C and 1H hetero- and homonuclear 2D NMR spectroscopy of the native and partial hydrolysed EPS revealed a repeating unit, no non-sugar substituents were present.     

Structure of a viscous exopolysaccharide produced by Lactobacillus helveticus K16

A viscous extracellular polysaccharide produced by Lactobacillus helveticus K16 has been investigated. Sugar and methylation analysis, 1H and 13C NMR spectroscopy revealed that the polysaccharide is composed of a hexasaccharide repeating unit. The sequence of sugar residues was determined by use of two-dimensional nuclear Overhauser effect spectroscopy and heteronuclear multiple bond connectivity experiments. The structure of the repeating unit of the exopolysaccharide from L. helveticus K16 is as follows: carbohydrate sequence [see text].     

The structure of the antigenic polysaccharide produced by Eubactrium saburreum T15

The antigenic polysaccharide was obtained from the cell wall of Eubacterium saburreum strain T15 by trypsin digestion followed by gel permeation and ion-exchange chromatography. Its structure was determined using acid hydrolysis, methylation analysis, and 1D and 2D NMR spectroscopy. It contained L-threo-pent-2-ulose (Xul), D-fucose (Fuc), and D-glycero-D-galacto-heptose (Hep) in 2:3:3 ratio. Methylation analysis indicated an octasaccharide repeating-unit containing five branches. The 1H and 13C signals in NMR spectra of the sugar residues were assigned by COSY, HOHAHA, and HMQC 2D experiments, and the sequence of sugar residues in the repeating unit was determined by NOESY and HMBC experiments. The polysaccharide also contains two O-acetyl groups in the repeating unit, located on the Hep residue. The repeating structure can be written as: [see text for equation]. This is a novel structure in bacterial cell-wall polysaccharides from Gram-positive bacteria.     

Synthesis of a low-molecular-weight form of exopolysaccharide by Bradyrhizobium japonicum USDA 110

A novel extracellular low-molecular-weight polysaccharide was detected as a contaminant within extracellular cyclic beta-1,6-beta-1,3-glucan preparations from Bradyrhizobium japonicum USDA 110 cultures. Compositional analysis, methylation analysis, and nuclear magnetic resonance analysis revealed that this low-molecular-weight polysaccharide was composed of the same pentasaccharide repeating unit previously described for the high-molecular-weight form of the exopolysaccharide (EPS) synthesized by B. japonicum strains. Mass spectrometry analysis indicated that the size of this low-molecular-weight form of EPS was consistent with a dimeric form of the pentasaccharide repeating unit.