A density functional theory analysis for the adsorption of the amine group on graphene and boron nitride nanosheets

In this paper first principles total energy calculations to study the adsorption of amine group (NH₂) on graphene (G) and boron nitride (hBN) nanosheets are developed; the density functional theory, within the local density approximation and Perdew-Wang functional was employed. The sheets were modeled with a sufficiently proved C_nH_m-like cluster with armchair edge. The optimized geometry was obtained following the minimum energy criterion, searching on four positions for each nanosheet: perpendicular to the carbon atom, on the hexagon, inside the hexagon and on the bridge C–C, for the G-amine interaction; and, perpendicular to the B, perpendicular to the N, on the hexagon, and inside the hexagon, for the hBN-amine interaction. A physisorption, with amine parallel to the C–C–C bond with a distance graphene-amine of 2.56 Å, was found. For the case of BN a B–N bond, with bond length equal to 1.56 Å, was found; the amine lies perpendicular to the nanosheet. When the graphene is doped with B and Al atoms a chemisorption with B–N (1.57 Å) and Al–N (1.78 Å) bonds is observed; the bond angle in the amine group is also incremented, 5.5° and 8.1°, respectively. In the presence of point defects (monovacancies) of B in the hBN-amine and C in the G-amine, there exists chemisorption, increasing the reactivity of the sheets.     

Influence of point defects on the electronic properties of boron nitride nanosheets

Density functional theory was utilized to study the electronic properties of boron nitride (BN) sheets, taking into account the presence of defects. The structure considered consisted of a central hexagon surrounded by alternating pentagons (three) and heptagons (three). The isocoronene cluster model with an armchair edge was used with three different chemical compositions. In the first structure, three B–B bonds were formed where one B in the dimer was part of the central hexagon. In the second structure, three N–N–N bonds were formed at the periphery of the cluster, around the central hexagon. In the third structure, three N–N bonds were formed in a similar fashion to the first model. Our results indicated that the third structure was the most stable configuration; this exhibited planar geometry, semiconductor behavior, and ionic character. To explore the effects of doping, we replaced B and N atoms with C atoms, considering different atomic positions in the central hexagon. When an N atom was replaced with a C atom, the new structure was a semiconductor, but when a B atom was replaced with a C atom, the new structure was a semimetal. At the same time, the polarity increased, inducing covalent behavior. Replacing two N atoms with two C atoms also resulted in a semiconductor, while replacing two B atoms with two C atoms yielded a semimetal; in both cases the bonding was covalent. When three B (three N) atoms of the central hexagon were replaced with three C atoms, the new structure exhibited a transition to a conductor (remained a semiconductor) with low polarity. When monovacancies (N) and divacancies (B and N) were inserted into the lattice, the system was transformed into a covalent semiconductor. Finally, the electrostatic potential surface was calculated in order to explore intermolecular properties such as the charge distribution, which showed how the reactivity of the boron nitride sheets was affected by doping and orbital hybridization.     

Effect of dimerization on the conformation of the encapsidation Psi domain of Moloney murine leukemia virus RNA.

In Moloney murine leukemia virus, the encapsidation Psi element was shown to be necessary and sufficient to promote packaging of viral RNA, and to be required for dimerization. The conformation of the Psi domain (nucleotides 215 to 565) was investigated in solution by chemical probing. The four bases were monitored at one of their Watson-Crick positions with dimethylsulfate at cytosine N3 and adenosine N1, and with a carbodiimide derivative at guanosine N1 and uridine N3. Position N7 of adenine residues was probed with diethylpyrocarbonate. The analyses were conducted on in vitro transcribed fragments corresponding either to the isolated Psi domain or to the 5'-terminal 725 nucleotides. The RNA fragments were analyzed in their monomeric and dimeric forms. A secondary structure model was derived from probing data, computer prediction and sequence analysis of related murine retroviruses. One major result is that Psi forms an independent and highly structured domain. Dimerization induces an extensive reduction of reactivity in region 278 to 309 that can be interpreted as the result of intermolecular interactions and/or intramolecular conformational rearrangements. A second region (around position 215) was shown to display discrete reactivity changes upon dimerization. These two regions represent likely elements of dimerization. More unexpectedly, reactivity changes (essentially enhancement of reactivity) were also detected in another part of Psi (around position 480) not believed to contain elements of dimerization. These reactivity changes could be interpreted as dimerization-induced allosteric transitions.     

AB INITIO Simulations of Desorption and Reactivity of Glycine at a Water-Pyrite Interface at “Iron-Sulfur World” Prebiotic Conditions

Glycine at the interface of a pyrite surface (001) FeS₂, and bulk water at high pressure and temperature conditions relevant to the “iron-sulfur world” scenario of the origin of life is investigated by theoretical means. Car-Parrinello molecular dynamics is used in order to study the desorption process of the zwitterionic form of this amino acid using two different adsorption modes, where either only one or both oxygens of the carboxylate group are anchored to surface iron atoms. It is found that the formation of stabilizing hydrogen bonds plays a key role in the detachment process, leading to longer retention times for the bidentate adsorption mode. In addition, the chemical reactivity of this heterogeneous system is probed by calculating the Fukui functions as site-specific reactivity indices. The most prominent targets for both nucleophilic and electrophilic reactions to occur are surface atoms, whereas the reactivity of glycine is only slightly affected upon anchoring.     

Electronic structure of boron-doped finite graphene sheets: unrestricted DFT and complete active space calculations

B3LYP and complete active space methods were applied to study graphene nanoribbons (GNRs) doped with boron atoms. The restricted B3LYP solutions were found to be unstable in all but two cases, and the complete active space calculations prove the multiconfigurational character of the ground state contributing with two most important configurations. The exception is the structure c4 where the system has single reference ground state in spite of the instability of the restricted wavefunction.

The distance between dopant atoms, their mutual position and their location within the nanoribbon impact the relative stability of doped nanoribbons. B doping does not modify the ionisation potentials of doped GNRs. However, it notably increases the electron affinity of the core-doped nanoribbons. The doping also has a notable impact on the reorganisation energy of the nanoribbons. The reorganisation energy of B-doped GNRs is higher than the corresponding reorganisation energy of pristine and nitrogen-doped GNRs.     

Aromaticity and electronic properties of Heterosuperbenzene (Heterohexabenzocoronene)

A global electrophilicity parameter and the aromaticity of some heterocyclic polyaromatic hydrocarbons were evaluated on the basis of DFT calculations. The substitution of carbon atoms by nitrogen atoms dramatically changes the global electrophilicity of the molecules, with the fully substituted molecule being the most electrophilic with a reactivity very close to that of fullerene. Figure Fully substituted heterohexabenzocoronene Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Concerted bis-alkylating reactivity of clerocidin towards unpaired cytosine residues in DNA

Clerocidin (CL) is a topoisomerase II poison, which cleaves DNA irreversibly at guanines (G) and reversibly at cytosines (C). Furthermore, the drug can induce enzyme-independent strand breaks at the G and C level. It has been previously shown that G-damage is induced by alkylation of the guanine N7, followed by spontaneous depurination and nucleic acid cleavage, whereas scission at C is obtained only after treatment with hot alkali, and no information is available to explain the nature of this damage. We present here a systematic study on the reactivity of CL towards C both in the DNA environment and in solution. Selected synthetic derivatives were employed to evaluate the role of each chemical group of the drug. The structure of CL–dC adduct was then characterized by tandem mass spectrometry and NMR: the adduct is a stable condensed ring system resulting from a concerted electrophilic attack of the adjacent carbonyl and epoxide groups of CL towards the exposed NH₂ and N3, respectively. This reaction mechanism, shown here for the first time, is characterized by faster kinetic rates than alkylation at G, due to the fact that the rate-determining step, alkylation at the epoxide, is an intramolecular process, provided a Schiff base linking CL and C can rapidly form, whereas the corresponding reaction of G N7 is intermolecular. These results provide helpful hints to explain the reversible/irreversible nature of topoisomerase II mediated DNA damage produced by CL at C/G steps.     

The impact of Cu atoms on the reactivity of ZrO2 oligomers

A theoretical study on (ZrO₂) _n (n = 1–5) and Cu/ZrO₂ oligomers is presented, DFT/B3LYP/6-31G** calculations along with Lanl2DZ pseudopotentials on metallic centers have been used to predict ionization potentials and electron affinities, chemical potentials and bandgaps indicating that the reactivity reaches reasonably constant values at n = 5. The effect of copper atoms adsorbed on (ZrO₂) _n is discussed and the reactivity of oligomers of ZrO₂ and Cu/ZrO₂ are compared, results indicate that Cu activates the systems by localizing the specific nucleophilic and electrophilic reactivity.     

Insights into the Na+ Storage Mechanism of Phosphorus‐Functionalized Hard Carbon as Ultrahigh Capacity Anodes

Hard carbon as a typical anode material for sodium ion batteries has received much attention in terms of its low cost and renewability. Herein, phosphorus‐functionalized hard carbon with a specific “honeycomb briquette” shaped morphology is synthesized via electrospinning technology. When applied as an anode material for Na⁺ storage, it exhibits an impressively high reversible capacity of 393.4 mA h g^?1 with the capacity retention up to 98.2% after 100 cycles. According to first‐principle calculation, the ultrahigh capacity of the as‐prepared anode is ascribed to the enhancement of Na‐absorption through formation of P?O and P? C bonds in graphitic layers when doped with phosphorus. Moreover, the increase of electron density around the Fermi level is found to be mainly caused by O atoms instead of P atoms.     

Influence of stereochemistry on proton transfer in protonated tripeptide models

Vectorial proton transfer among carbonyl oxygen atoms was studied in two models of tripeptide via quantum chemical calculations using the hybrid B3LYP functional and the 6-31++G** basis set. Two principal proton transfer pathways were found: a first path involving isomerization of the proton around the double bond of the carbonyl group, and a second based on the large conformational flexibility of the tripeptide model where all carbonyl oxygen atoms cooperate. The latter pathway has a rate-determining step energy barrier that is only around half of that for the first pathway. As conformational flexibility plays a crucial role in second pathway, the effect of attaching methyl groups to the alpha carbon atoms was studied. The results obtained are presented for all four possible stereochemical configurations.     

Use of both direct and indirect 13C tags for probing nitrogen interactions in hairpin ribozyme models by 15N NMR

We have used the synthesis and 15N NMR study of separate loop A and loop B domains of the hairpin ribozyme to demonstrate that multiple 15N atoms can be incorporated into an RNA strand and be unambiguously distinguished through a combination of direct and indirect tagging by 13C atoms. Absence of 15N chemical shift changes shows that the G8N1 in loop A does not become deprotonated up to pH 8, and that the G21N7 of loop B does not bind to Mg2+.     

First principles calculations of the electronic and chemical properties of graphene,graphane, and graphene oxide

The electrical and chemical properties of graphene (C₂₄H₁₂), graphane (C₂₄H₂₄) and graphene oxide (C₅₄H₁₇+O+(OH)₃+COOH) were studied through the density functional theory (DFT) at level of Local Density Approximation (LDA) using a model C_nH_m like. The optimized geometry, energy gap and chemical reactivity for the proposed carbon 2D models are reported. It was found that while the graphene and graphane structures have semiconductor behavior, the graphene oxide behaves as semi-metal. However, a transition from semi-mental to semiconductor is predicted if the carboxyl group (COOH) is removed from such structure. The chemically active sites are analyzed on the basis of the electrophilic Fukui functions for each structure.