Dynactin-dependent cortical dynein and spherical spindle shape correlate temporally with meiotic spindle rotation in Caenorhabditis elegans

Oocyte meiotic spindles orient with one pole juxtaposed to the cortex to facilitate extrusion of chromosomes into polar bodies. In Caenorhabditis elegans, these acentriolar spindles initially orient parallel to the cortex and then rotate to the perpendicular orientation. To understand the mechanism of spindle rotation, we characterized events that correlated temporally with rotation, including shortening of the spindle in the pole-to pole axis, which resulted in a nearly spherical spindle at rotation. By analyzing large spindles of polyploid C. elegans and a related nematode species, we found that spindle rotation initiated at a defined spherical shape rather than at a defined spindle length. In addition, dynein accumulated on the cortex just before rotation, and microtubules grew from the spindle with plus ends outward during rotation. Dynactin depletion prevented accumulation of dynein on the cortex and prevented spindle rotation independently of effects on spindle shape. These results support a cortical pulling model in which spindle shape might facilitate rotation because a sphere can rotate without deforming the adjacent elastic cytoplasm. We also present evidence that activation of spindle rotation is promoted by dephosphorylation of the basic domain of p150 dynactin.     

Kinesin-1 and Cytoplasmic Dynein Act Sequentially to Move the Meiotic Spindle to the Oocyte Cortex in Caenorhabditis elegans

During female meiosis in animals, the meiotic spindle is attached to the egg cortex by one pole during anaphase to allow selective disposal of half the chromosomes in a polar body. In Caenorhabditis elegans, this anaphase spindle position is achieved sequentially through kinesin-1–dependent early translocation followed by anaphase-promoting complex (APC)-dependent spindle rotation. Partial depletion of cytoplasmic dynein heavy chain by RNA interference blocked spindle rotation without affecting early translocation. Dynein depletion also blocked the APC-dependent late translocation that occurs in kinesin-1–depleted embryos. Time-lapse imaging of green fluorescent protein-tagged dynein heavy chain as well as immunofluorescence with dynein-specific antibodies revealed that dynein starts to accumulate at spindle poles just before the initiation of rotation or late translocation. Accumulation of dynein at poles was kinesin-1 independent and APC dependent, just like dynein driven spindle movements. This represents a case of kinesin-1/dynein coordination in which these two motors of opposite polarity act sequentially and independently on a cargo to move it in the same direction.     

Determinants of S. cerevisiae dynein localization and activation: implications for the mechanism of spindle positioning

BACKGROUND: During anaphase in budding yeast, dynein inserts the mitotic spindle across the neck between mother and daughter cells. The mechanism of dynein-dependent spindle positioning is thought to involve recruitment of dynein to the cell cortex followed by capture of astral microtubules (aMTs). RESULTS: We report the native-level localization of the dynein heavy chain and characterize the effects of mutations in dynein regulators on its intracellular distribution. Budding yeast dynein displays discontinuous localization along aMTs, with enrichment at the spindle pole body and aMT plus ends. Loss of Bik1p (CLIP-170), the cargo binding domain of Bik1p, or Pac1p (LIS1) resulted in diminished targeting of dynein to aMTs. By contrast, loss of dynactin or a mutation in the second P loop domain of dynein resulted in an accumulation of dynein on the plus ends of aMTs. Unexpectedly, loss of Num1p, a proposed dynein cortical anchor, also resulted in selective accumulation of dynein on the plus ends of anaphase aMTs. CONCLUSIONS: We propose that, rather than first being recruited to the cell cortex, dynein is delivered to the cortex on the plus ends of polymerizing aMTs. Dynein may then undergo Num1p-dependent activation and transfer to the region of cortical contact. Based on the similar effects of loss of Num1p and loss of dynactin on dynein localization, we suggest that Num1p might also enhance dynein motor activity or processivity, perhaps by clustering dynein motors.     

Cortical dynein is critical for proper spindle positioning in human cells

Correct spindle positioning is fundamental for proper cell division during development and in stem cell lineages. Dynein and an evolutionarily conserved ternary complex (nuclear mitotic apparatus protein [NuMA]–LGN–Gα in human cells and LIN-5–GPR-1/2–Gα in Caenorhabditis elegans) are required for correct spindle positioning, but their relationship remains incompletely understood. By analyzing fixed specimens and conducting live-imaging experiments, we uncovered that appropriate levels of ternary complex components are critical for dynein-dependent spindle positioning in HeLa cells and C. elegans embryos. Moreover, using mutant versions of Gα in both systems, we established that dynein acts at the membrane to direct spindle positioning. Importantly, we identified a region within NuMA that mediates association with dynein. By using this region to target dynein to the plasma membrane, we demonstrated that the mere presence of dynein at that location is sufficient to direct spindle positioning in HeLa cells. Overall, we propose a model in which the ternary complex serves to anchor dynein at the plasma membrane to ensure correct spindle positioning.     

Dynein-dependent transport of spindle assembly checkpoint proteins off kinetochores toward spindle poles

A predominant mechanism of spindle assembly checkpoint (SAC) silencing is dynein-mediated transport of certain kinetochore proteins along microtubules. There are still conflicting data as to which SAC proteins are dynein cargoes. Using two ATP reduction assays, we found that the core SAC proteins Mad1, Mad2, Bub1, BubR1, and Bub3 redistributed from attached kinetochores to spindle poles, in a dynein-dependent manner. This redistribution still occurred in metaphase-arrested cells, at a time when the SAC should be satisfied and silenced. Unexpectedly, we found that a pool of Hec1 and Mis12 also relocalizes to spindle poles, suggesting KMN components as additional dynein cargoes. The potential significance of these results for SAC silencing is discussed.     

Coupling of cortical dynein and G alpha proteins mediates spindle positioning in Caenorhabditis elegans

Despite being essential for spatial cell division control, the mechanisms governing spindle positioning remain incompletely understood. In the Caenorhabditis elegans one-cell stage embryo, the spindle becomes asymmetrically positioned during anaphase through the action of as-yet unidentified cortical force generators that pull on astral microtubules and that depend on two G alpha proteins and associated proteins. We performed spindle-severing experiments following temporally restricted gene inactivation and drug exposure, and established that microtubule dynamics and dynein are both required for generating efficient pulling forces. We found that the G alpha-associated proteins GPR-1/2 and LIN-5 interact in vivo with LIS-1, a component of the dynein complex. Moreover, we discovered that the LIN-5, GPR-1/2 and the G alpha proteins promote the presence of the dynein complex at the cell cortex. Our findings suggest a mechanism by which the G alpha proteins enable GPR-1/2 and LIN-5 recruitment to the cortex, thus ensuring the presence of cortical dynein. Together with microtubule dynamics, this allows pulling forces to be exerted and proper cell division to be achieved.     

Dynamic localization of LIN-5 and GPR-1/2 to cortical force generation domains during spindle positioning

G protein signaling pathways regulate mitotic spindle positioning during cell division in many systems. In Caenorhabditis elegans embryos, Gα subunits act with the positive regulators GPR-1/2 and LIN-5 to generate cortical pulling forces for posterior spindle displacement during the first asymmetric division. GPR-1/2 are asymmetrically localized at the posterior cortex by PAR polarity cues at this time. Here we show that LIN-5 colocalizes with GPR-1/2 in one-cell embryos during spindle displacement. Significantly, we also find that LIN-5 and GPR-1/2 are localized to the opposite, anterior cortex in a polarity-dependent manner during the nuclear centration and rotation movements that orient the forming spindle onto the polarity axis. The depletion of LIN-5 or GPR-1/2 results in decreased centration and rotation rates, indicating a role in force generation at this stage. The localization of LIN-5 and GPR-1/2 is largely interdependent and requires Gα. Further, LIN-5 immunoprecipitates with Gα in vivo, and this association is GPR-1/2 dependent. These results suggest that a complex of Gα/GPR-1/2/LIN-5 is asymmetrically localized in response to polarity cues, and this may be the active signaling complex that transmits asymmetries to the force generation machinery during both nuclear rotation and spindle displacement.     

Asymmetric recruitment of dynein to spindle poles and microtubules promotes proper spindle orientation in yeast

The orientation of the mitotic spindle plays a key role in determining whether a polarized cell will divide symmetrically or asymmetrically. In most cell types, cytoplasmic dynein plays a critical role in spindle orientation. However, how dynein directs opposite spindle poles toward distinct and predetermined cell ends is poorly understood. Here, we show that dynein distributes preferentially to the spindle pole bodies (SPB) and astral microtubules (MTs) proximal to the bud in metaphase yeast cells. Dynein asymmetry depended on the bud neck kinases Elm1, Hsl1, and Gin4, on the spindle pole components Cnm67 and Cdk1, and on the B-type cyclins Clb1 and Clb2. Furthermore, phenotypic and genetic studies both indicated that dynein is unable to orient the spindle when it localizes to both poles and associated microtubules. Together, our data indicate that proper orientation of the spindle requires dynein to act on a single spindle pole.     

Mechanisms of spindle positioning

Accurate positioning of spindles is essential for asymmetric mitotic and meiotic cell divisions that are crucial for animal development and oocyte maturation, respectively. The predominant model for spindle positioning, termed “cortical pulling,” involves attachment of the microtubule-based motor cytoplasmic dynein to the cortex, where it exerts a pulling force on microtubules that extend from the spindle poles to the cell cortex, thereby displacing the spindle. Recent studies have addressed important details of the cortical pulling mechanism and have revealed alternative mechanisms that may be used when microtubules do not extend from the spindle to the cortex.Mitotic and meiotic spindles are precisely positioned within eukaryotic cells for several reasons. In animal cells, spindle position determines the location of contractile ring assembly (Green et al., 2012). Thus, placing a spindle in the center of the cell will result in daughter cells of equal size, whereas positioning the spindle asymmetrically results in daughter cells of different sizes. In oocytes, the extreme asymmetrical positioning of the meiotic spindle allows expulsion of three fourths of the chromosomes into two tiny polar bodies while preserving most of the cytoplasm in the egg for the developing zygote. In polarized cells, where proteins and RNAs are asymmetrically distributed before division, the orientation of the spindle relative to the polarity axis determines whether the daughter cells will have the same or different developmental fates. An excellent review of the developmental context of spindle positioning is provided by Morin and Bellaïche (2011). In budding yeast (Slaughter et al., 2009) and plants (Rasmussen et al., 2011), the site of cytokinesis is determined before the spindle forms. In these organisms, the spindle must be oriented relative to the predetermined division plane to ensure that both daughter cells receive a complete chromosome complement.The majority of research on the mechanisms of spindle positioning has focused on cell types that have “astral” microtubules. Astral microtubules have minus ends embedded in the spindle poles and plus ends extending outward, away from the spindle toward the cell cortex (Fig. 1, A and B). Astral microtubules have been proposed to mediate spindle positioning by generating pulling forces at the cortex or pulling forces against the cytoplasm. The minus ends of astral microtubules are embedded in the pericentriolar material that surrounds the centrioles of animal cells or in the spindle pole bodies of fungi. This attachment is essential for pulling forces on the astral microtubules to move the spindle. However, late stage oocytes of several animal phyla and all cells of flowering plants lack centrioles and lack obvious astral microtubules. Thus, these cell types have evolved alternative spindle positioning mechanisms. Here we review recent advances in both astral and nonastral spindle positioning mechanisms.Open in a separate windowFigure 1.Mitotic spindle movements in the C. elegans zygote. (A) Schematic diagram of a single-celled C. elegans embryo showing cortical pulling by cytoplasmic dynein during pronuclear centration and rotation. The nuclei move toward the anterior (left) so that the spindle assembles in the center of the embryo. (B) Schematic diagram of a single-celled C. elegans embryo showing cortical pulling by dynein during anaphase. The spindle moves to the posterior (right) so that cytokinesis generates two cells of different sizes. The squares highlight a dynein molecule that pulls toward the posterior before spindle displacement, then pulls toward the anterior after spindle displacement. (C) Schematic drawing of cytoplasmic pulling that contributes to centering the pronuclei. (D) Illustration of a spindle that was centered at metaphase but in which both poles moved all the way to the posterior end of the embryo. This occurs in zyg-8 mutants (Gönczy et al., 2001), cls-1,2 (RNAi) embryos (Espiritu et al., 2012), and zyg-9(ts) mutants shifted to a nonpermissive temperature at metaphase (Bellanger et al., 2007), possibly because astral microtubules are too short to reach force generators that would pull toward the anterior.

Cortical versus cytoplasmic pulling

The most prominent model of spindle positioning involves a cortical pulling mechanism. In this model, the minus end–directed microtubule motor protein, cytoplasmic dynein, is attached to the cell cortex and exerts pulling forces on the plus ends of astral microtubules that reach the cortex. In the single-celled Caenorhabditis elegans embryo at early prophase, complexes of GPR-1,2 (G protein regulator) and LIN-5 (abnormal cell lineage), positive regulators of cytoplasmic dynein, are more concentrated at the anterior cortex of the embryo (Fig. 1 A; Park and Rose, 2008), resulting in greater net pulling force toward the anterior. This results in net movement of the pronuclei to the center of the embryo and rotation of the centrosome–pronuclear complex so that the metaphase spindle forms in the center of the embryo with its poles oriented along the anterior-posterior axis of the embryo (Fig. 1 B). During metaphase and early anaphase, GPR-1,2 and LIN-5 become more concentrated at the posterior end of the embryo, resulting in movement of the spindle toward the posterior so that cytokinesis generates daughter cells of different sizes (Fig. 1 B; Grill et al., 2001, 2003). Depending on the relative distribution of active force generators at the cortex, this mechanism can also lead to centering the spindle within the cell to allow symmetric cytokinesis as occurs in HeLa cells (Kiyomitsu and Cheeseman, 2012) and LLC-Pk1 cells (Collins et al., 2012). Cortical pulling might involve pulling on the sides of microtubules that bend as they approach the cortex (Fig. 1 A, 1) or end-on interactions that require coupling of microtubule depolymerization with pulling (Fig. 1 A, 2), as occurs at kinetochores during anaphase A (McIntosh et al., 2010).Cortical pulling differs from a cytoplasmic pulling mechanism most clearly proposed by Kimura and Kimura (2011) and diagrammed in Fig. 1 C. In this cytoplasmic pulling mechanism, the viscous drag on membranous organelles transported toward the minus ends of astral microtubules by cytoplasmic dynein generates a force in the opposite direction, toward the cortex. Depletion of RAB-5, RAB-7, or RILP-1 (RAB-7 interacting lysosomal protein homologue) blocks dynein-dependent organelle transport and slows the velocity of pronuclear centration in C. elegans without affecting other dynein-dependent movements (Kimura and Kimura, 2011). Elimination of cortical pulling by depleting GPR-1,2 also slows pronuclear centration (Park and Rose, 2008), which suggests that cortical pulling and cytoplasmic pulling each contribute 50% of the velocity of pronuclear centration. Unlike end-on cortical pulling, cytoplasmic pulling force is proportional to the length of the astral microtubules because more organelles will be transported on a long microtubule than a short microtubule (Fig. 1 C). This generates a self-centering mechanism as the length of the astral microtubules equalize when the pronuclei reach the center of the zygote (Fig. 1 A; Hamaguchi and Hiramoto, 1986). Cytoplasmic pulling may predominate in very large zygotes where astral microtubules clearly do not reach the cortex but where both pronuclei and the mitotic spindle are centered (Mitchison et al., 2012).

Evidence for cortical pulling.

The cortical pulling mechanism requires that microtubules extend from the spindle to the cortex and form a contiguous structure that is mechanically robust enough that the force generators do not pull the minus ends of the microtubules out of the spindle pole or cause the plasma membrane to buckle inward. Experimental evidence for this contiguous mechanical linkage comes from experiments in oocytes of the marine annelid, Chaetopterus. Insertion of a glass needle into the meiotic spindle allowed pulling the spindle away from the cortex, which caused inward buckling of the cortex. Further pulling resulted in sudden release of the spindle from the cortex, restoration of cortical shape, and concomitant disappearance of a birefringent aster extending between the spindle and cortex (Lutz et al., 1988). The second requirement for a cortical pulling mechanism is that force is generated at the cortex. Using a laser to cut the central spindle of an early anaphase C. elegans embryo, Grill et al. (2001) showed that spindle poles are pulled from outside the spindle rather than pushed from inside the spindle during posterior spindle displacement. Fragmentation of centrosomes with a laser (Grill et al., 2003) revealed that astral microtubules freed from the spindle move outward toward the cortex. Either cortical pulling or cytoplasmic pulling could explain this result; however, the asymmetric distribution of fragment velocities is controlled by proteins that are localized at the cortex, GPR-1,2 (Grill et al., 2003) and LET-99 (lethal-99; Krueger et al., 2010). In a key experiment, Redemann et al. (2010) showed that microtubule plus ends pull tubular invaginations of the plasma membrane inward when cortical stiffness is partially reduced. This experiment showed that astral microtubules are pulling on the cortex during spindle displacement, which would not occur if forces were generated by movement of cytoplasmic organelles along the sides of microtubules.

End-on versus side-on microtubule–cortex interactions.

How do microtubules interact with force generators at the cortex? Astral microtubules might polymerize to the cortex then bend along it so that cortical motors interact with the side of the microtubule to generate force (Fig. 1 A, 1). This type of interaction would be consistent with the in vitro gliding motility of microtubules generated by cytoplasmic dynein immobilized on glass coverslips (Paschal et al., 1987; Vallee et al., 1988) and is the only type of dynein-dependent cortical microtubule interaction observed in budding yeast (Adames and Cooper, 2000). Studies of C. elegans embryos, however, support end-on microtubule contacts (Fig. 1 A, 2) as the functional contact with cortical force generators for posterior displacement of the early anaphase spindle. Live imaging of YFP-tubulin in optical sections at the surface of the embryo during anaphase revealed dots rather than lines, indicating that the microtubules contacting the cortex are <200 nm in length (Labbé et al., 2003; Kozlowski et al., 2007). When short microtubule fragments are generated by ectopic katanin activity, dynein-dependent gliding of microtubule “lines” on the cortex is frequently observed (Gusnowski and Srayko, 2011), indicating that cortical dynein is capable of moving microtubules along the cortex via side-on interactions in wild-type embryos but that it does not during posterior displacement of the anaphase spindle. A likely explanation comes from the finding that astral microtubule plus ends undergo catastrophe (switch to depolymerization) on average 1.4 s after polymerizing to the cortex (Kozlowski et al., 2007). Thus astral microtubule plus ends do not have time to polymerize along the cortex to establish extensive side-on contacts. Support for this idea comes from depletion of the conserved plasma membrane protein EFA-6 (exchange factor for Arf) from the C. elegans embryo. In the absence of EFA-6, the residence time of microtubule plus ends at the cortex increases fivefold, astral microtubules form extensive lateral contacts with the cortex, and centrosomes exhibit movements consistent with excessive dynein-dependent cortical pulling (O’Rourke et al., 2010). Side-on contacts of astral microtubules with the cortex occur later during telophase in the wild-type C. elegans embryo (Kozlowski et al., 2007), but the nature of this switch has not been addressed.The two distinct activities of cytoplasmic dynein, end-on pulling and walking along the side of a microtubule, have been genetically separated in C. elegans. Cortical pulling forces during early anaphase require the redundant cortical dynein activators GPR-1 and -2 (Grill et al., 2003), which bind to LIN-5 (Gotta et al., 2003). GPR-1,2/LIN-5 is anchored in the plasma membrane via the myristoyl and palmitoyl lipid modifications of the redundant Gα proteins GOA-1 and GPA-16 (Gotta et al., 2003; Park and Rose, 2008; Kotak et al., 2012). The complex of GPR-1 and LIN-5 interacts with the dynein light chain DYRB-1 (Couwenbergs et al., 2007) and the dynein regulator LIS-1 (human lissencephaly gene related; Nguyen-Ngoc et al., 2007). GPR-1 and -2, however, are not required for dynein-dependent gliding of severed microtubule fragments along the cortex (Gusnowski and Srayko, 2011), dynein-dependent transport of membranous organelles along the sides of microtubules (Kimura and Kimura, 2011), dynein-dependent positioning of the acentriolar C. elegans meiotic spindle (van der Voet et al., 2009), or dynein-dependent centration of the male pronucleus (Kimura and Kimura, 2011). These GPR-independent activities of cytoplasmic dynein likely do not require end-on pulling.Recently, end-on pulling by cytoplasmic dynein has been reconstituted in vitro with a purified preparation of artificially dimerized budding yeast cytoplasmic dynein. Laan et al. (2012) immobilized purified cytoplasmic dynein on microfabricated barriers and observed the interaction of centrosome-nucleated microtubules as they approached these dynein-coated barriers. Microtubule plus ends hitting a dynein-coated barrier switched to catastrophe with high frequency but the microtubule depolymerization rate after the catastrophe was reduced. The result was an extended period of interaction between the depolymerizing plus end and the dynein-coated barrier. Plus-end depolymerization pulled the centrosome toward the barrier, and in similar reactions the pulling force was measured as high as 5 pN. Side-on interactions with the barrier were not observed. Whereas ATP was required for this end-on pulling, it is not clear if the energy source is ATP hydrolysis–driven stepping by dynein or if the energy source is GTP hydrolysis–driven depolymerization of the microtubule. In the latter case, ATP might only be required to prevent rigor binding of dynein to the microtubule. Indeed, an artificial rigor binding of a streptavidin-coated bead to a depolymerizing biotinylated microtubule plus end resulted in a pulling force that is restricted to an extremely short distance (Grishchuk et al., 2005). In vitro reconstitution of pulling force coupled to depolymerizing microtubule plus ends was first demonstrated with beads coated with kinesin-1 or a nonmotile kinesin chimera (NK350; Lombillo et al., 1995). Like barrier-bound cytoplasmic dynein, kinesin-coated beads slowed the depolymerization rate of microtubule plus ends, whereas NK350-coated beads enhanced the depolymerization rate of bound plus ends. ATP enhanced depolymerization-coupled pulling for both kinesin-1 and NK350, just as it did for barrier-bound cytoplasmic dynein. The in vitro pulling reaction reconstituted by Laan et al. (2012) seems unlikely to be the same reaction that pulls on plus ends in the anaphase budding yeast cell, as these are through side-on interactions (Adames and Cooper, 2000). In vitro reconstitution of a GPR/LIN-5–dependent, end-on pulling reaction with purified metazoan cytoplasmic dynein may reveal mechanisms acting on spindles in vivo.Another interesting contrast between end-on versus side-on cortical pulling reactions is suggested by differences in the dependence on cortical F-actin. F-actin is required for cortical rigidity to prevent end-on microtubule contacts from pulling membrane tubules inward instead of moving the spindle pole outward (Redemann et al., 2010). Side-on pulling by cortical dynein in budding yeast, however, does not require F-actin (Theesfeld et al., 1999; Heil-Chapdelaine et al., 2000a). The curvature of microtubules gliding on the bud cortex indicates that the microtubule is engaged with multiple dynein molecules distributed over several microns of cortex, and this distribution of force might allow effective pulling against a less rigid cortex. Alternatively, rigidity of the yeast plasma membrane might be mediated by oligomers of BAR domain proteins like Num1 (nuclear migration; Tang et al., 2012) or eisosomes (Walther et al., 2006; Olivera-Couto et al., 2011), by osmotic pressure, or by attachment of the plasma membrane to the cell wall.

Why the spindle is not pulled all the way to the cortex with more active force generators.

What prevents the C. elegans centrosome–pronuclear complex from moving all the way to the anterior cortex where the concentration of cortical force generators is highest during prophase (Fig. 1 A), and what prevents the spindle from moving all the way to the posterior cortex, which has the highest concentration of active force generators during anaphase (Fig. 1, B and D)? Increasing the concentration of GPR-1,2/LIN-5 at the anterior cortex causes pronuclei to move further toward the anterior, but they still do not crash into the anterior cortex (Panbianco et al., 2008). During metaphase/anaphase (Fig. 1 B), weak cortical pulling on the anterior aster might oppose strong pulling on the posterior aster. Supporting this idea, spindle severing results in the posterior aster moving further posterior than when the spindle is intact (Grill et al., 2001), but the posterior pole still does not move all the way to the posterior cortex. Monopolar spindles move toward the posterior in a GPR1,2-dependent manner but then reverse direction and oscillate along the anterior-posterior axis (Krueger et al., 2010). Laan et al. (2012) found that centrosome-nucleated microtubule asters could accurately self-center within microchambers whose walls are coated with dynein. Their mathematical modeling suggested that self-centering was achieved because of a balance between cortical pulling by dynein and pushing by polymerizing microtubules (Dogterom and Yurke, 1997) that have not yet engaged a dynein molecule. Thus, cortical pushing by astral microtubules might buffer cortical pulling in vivo. Grill and Hyman (2005) suggested another simple solution. When a spindle pole moves to the posterior, it passes a subset of cortical force generators that were initially pulling toward the posterior (Fig. 1 B, box). After passage of the spindle pole, these force generators pull toward the anterior. Failure in any of these buffering mechanisms might explain why both spindle poles move to the posterior cortex (Fig. 1 D) in mutants that have either short astral microtubules or fewer astral microtubules reaching the cortex (Gönczy et al., 2001; Bellanger et al., 2007; Espiritu et al., 2012).Recent experiments in HeLa and LLC-Pk1 cells have revealed a more sophisticated feedback mechanism that effectively centers the mitotic spindle. Kiyomitsu and Cheeseman (2012) found that HeLa cell mitotic spindles oscillate back and forth along their pole-to-pole axis. They found that dynein/dynactin formed a lateral crescent on the cortex when the spindle was far from that lateral cortex (Fig. 2 A). As the spindle moved toward the dynein crescent, the dynein crescent disappeared as the spindle approached and a new crescent appeared on the opposite lateral cortex (Fig. 2 C). They found that polo kinase 1 (Plk1), which is concentrated on spindle poles, causes dynein/dynactin to dissociate from the LGN–NuMA–Gαi complex (Leu-Gly-Asn repeat enriched protein–nuclear mitotic apparatus protein–Gα; homologues of GPR-1,2–LIN-5–Gα), which explains why the dynein crescent disappears once the spindle pole gets close to the cortex. They also found that the GTP-Ran gradient produced by chromosome-bound RCC1 (regulator of chromosome condensation) was responsible for inhibiting LGN–NuMA association with the cortex, and hence dynein, above the central spindle (Fig. 2). The RCC1 pathway explains why the spindles move only along their pole–pole axis. The two pathways combine to center the spindle in two different axes. Similar spindle oscillations with dynein/dynactin crescents forming only when the spindle pole is far from the cortex were reported in LLC-Pk1 epithelial cells (Collins et al., 2012). Because spindles are small relative to the two-dimensional flattened area of these cells, the role of this pathway in centering spindles to allow symmetric cytokinesis is much more obvious than in HeLa cells.Open in a separate windowFigure 2.How to center a spindle. Schematic diagram of a metaphase HeLa cell where the spindle oscillates along its pole–pole axis to maintain a centered position to allow symmetric cytokinesis. (A) When the left spindle pole is close to the cortex, Plk1 on the pole (red) causes dynein (green) to dissociate from LGN–NuMA complexes (purple; human homologues of GPR-1,2/LIN-5). (B and C) The spindle moves to the right because of the higher concentration of LGN–NuMA–dynein complexes on the right cortex. When chromosomes are close to the cortex as in A, the GTP-Ran gradient from the chromosomes causes dissociation of LGN/NuMA from the cortex. This second system centers the spindle in the axis perpendicular to the pole–pole axis.There are normal situations where movement of one spindle pole all the way to the cortex occurs. This exaggerated movement that results in one set of astral microtubules being splayed onto the cortex is observed in fourth cleavage sea urchin embryos (Holy and Schatten, 1991) and for the female meiotic spindles of Chaetopterus (Lutz et al., 1988) and Spisula solidissima (Pielak et al., 2004).

The budding yeast model.

The S. cerevisiae mitotic spindle is positioned relative to a preformed bud neck by two sequential and partially redundant cortical pulling pathways to ensure that chromosomes are deposited into both mother and daughter cells. Spindle positioning is also monitored by a budding yeast–specific checkpoint (Caydasi et al., 2010). Deletion of genes in any one positioning pathway results in a viable yeast strain, whereas double mutants bearing deletions of genes in both positioning pathways or of genes in one positioning pathway plus the checkpoint results in lethality (Miller et al., 1998). In the early pathway, the microtubule plus-end tip tracking protein, Bim1 (binding to microtubules; EB1 homologue), binds to the yeast-specific adaptor protein Kar9 (karyogamy; Korinek et al., 2000; Lee et al., 2000; Miller et al., 2000), which binds to the yeast myosin V (Myo2; Yin et al., 2000). Myosin V transports the growing microtubule plus end toward the bud tip on polarized actin cables (Hwang et al., 2003). This results in a unique “sweeping” or “pivoting” of the growing astral microtubule toward the bud neck (Fig. 3 A; Adames and Cooper, 2000). Because Bim1 only binds to growing microtubule plus ends (Zimniak et al., 2009), this mechanism alone cannot bring the spindle to the bud neck because the polymerizing astral microtubule would push the spindle back into the mother cell. To prevent the astral microtubules from becoming too long, the kinesin-8 family member, Kip3, passively tracks the plus end until the plus end reaches the bud cortex (Fig. 3 A). Kip3 then switches to a plus-end depolymerase and shortens the astral microtubule to pull the spindle to the bud neck (Fig. 3, B and C; Gupta et al., 2006). Purified Kip3 has unique biochemical properties that contribute to its in vivo function. In vitro, Kip3 accumulates at plus-end tips via its plus end–directed motor activity. Longer microtubules accumulated more Kip3 at their plus ends than short microtubules simply because there are more lateral binding sites on a long microtubule and Kip3 switches to a plus-end depolymerase only when the microtubule has reached a threshold length (Varga et al., 2009). Plus-end pulling by the fission yeast homologue of Kip3 has also been reconstituted in vitro (Grissom et al., 2009). More recent work suggests that Kip3-dependent cortical pulling requires the concerted action of the cortical protein, Bud6 (BUD site selection), and the plus end tracker, Bim1, as well as cytoplasmic dynein (ten Hoopen et al., 2012).Open in a separate windowFigure 3.Spindle positioning in budding yeast. Schematic diagram of the two sequential spindle positioning pathways of budding yeast. In the early pathway (A–C), myosin V transports the plus end of an astral microtubule toward the bud tip on a polarized actin cable. Once the plus end has reached the bud cortex, the plus-end depolymerase, KIP3, is activated to allow pulling of the spindle pole toward the bud neck. In the late pathway (D–F), the plus end–directed microtubule motor Kip2 transports dynein to the plus ends of microtubules via the adaptor protein Bik1 (D). Dynein can be targeted to plus ends by two additional Bik1-dependent mechanisms (see text). When dynein reaches the bud cortex on a polymerizing microtubule plus end (E), contact with the cortical protein Num1 allows dynein to pull the spindle toward the bud (F). During early anaphase (D and E), dynein is not loaded onto microtubules in the mother cell. During late anaphase (F), dynein is loaded on microtubules in the mother cell to prevent movement of the spindle all the way into the bud.The late pathway is initiated when the yeast-specific dynein inhibitor She1 (sensitivity to high expression) is removed from astral microtubules at the metaphase–anaphase transition (Woodruff et al., 2009). She1 appears to act specifically by preventing recruitment of dynactin to microtubules (Bergman et al., 2012) and by inhibiting dynein motility (Markus et al., 2012). In the late pathway, cytoplasmic dynein is targeted to growing microtubule plus ends by the plus-end tracking protein Bik1 (bilateral karyogamy defect; Sheeman et al., 2003), which itself is targeted to plus ends by three partially redundant mechanisms. In the first mechanism, Bik1 is transported as cargo by the plus end–directed kinesin Kip2 (Carvalho et al., 2004). Cytoplasmic dynein is thus transported as cargo to the bud cortex by Bik1–Kip2 complexes (Fig. 3 D). In the absence of Kip2, Bik1 (and therefore dynein) can still track growing microtubule plus ends either through a second mechanism that requires the C-terminal tyrosine residue of α-tubulin or a third mechanism that requires the plus end–tracking protein Bim1 (Caudron et al., 2008). This is partially consistent with results of reconstitution experiments with purified proteins showing that the Bik1 homologue, CLIP170, tracks growing plus ends through a mechanism that involves binding to both the Bim1 homologue, EB1, and the C-terminal tyrosine-containing motif of α-tubulin (Bieling et al., 2008). When a microtubule plus end carrying dynein contacts the yeast-specific cortical protein Num1, Num1 apparently stimulates off-loading of the dynein tail onto the cortex so that the dynein motor domains engage the microtubule in a cortical pulling reaction (Fig. 3, E and F). Deletion of Num1 results in accumulation of inactive dynein at plus ends (Lee et al., 2003; Sheeman et al., 2003; Markus and Lee, 2011). In contrast with the GPR-dependent end-on cortical interactions observed in C. elegans, dynein-dependent cortical pulling is mediated by lateral sliding of astral microtubules along the yeast bud cortex (Fig. 3, E and F; Adames and Cooper, 2000). Also, unlike cortical GPR/LIN-5 in animal cells, cortical Num1 is distributed in patches throughout both mother and daughter cells (Heil-Chapdelaine et al., 2000b) and even participates in mitochondrial positioning and fission throughout the cell (Cerveny et al., 2007; Hammermeister et al., 2010). If there is no asymmetrically distributed cortical activator of dynein, how is dynein-mediated pulling directed specifically toward the bud cortex?

Why both spindle poles are not pulled to the same cortex in budding yeast.

The budding yeast spindle, rather than the cortex, is asymmetrical. At metaphase, Kar9 is asymmetrically localized on the spindle pole oriented toward the bud and on the plus ends of astral microtubules emanating from that bud-proximal spindle pole (Liakopoulos et al., 2003). This alone would explain why only one spindle pole moves toward the bud but then leaves the question of how Kar9 asymmetry is established. Cepeda-García et al. (2010) found that Kar9 at spindle poles became symmetrical and reduced in concentration after depolymerization of actin cables, depolymerization of microtubules, or disruption of the myosin V–Kar9 interaction. When microtubules were repolymerized, Kar9 was initially symmetrical on both spindle poles and quickly repolarized onto the first microtubule to make a functional cortical contact. These results suggested a positive feedback loop in which functional cortical pulling by Bim1–Kar9–Myo2 complexes causes loading of additional Kar9. Cytoplasmic dynein also accumulates preferentially on the plus-end tips that reach the bud neck first (Fig. 3, D and E) and on the bud-proximal spindle pole during metaphase. The asymmetrical accumulation of dynein on the bud-proximal microtubules and bud-proximal spindle pole requires kinases that are found at the bud neck. Thus, the asymmetry of dynein localization may be generated by a positive feedback loop, as suggested for Kar9 asymmetry. After the spindle is pulled into the bud neck, during anaphase, dynein becomes symmetrical on the plus ends emanating from both poles (Fig. 3 F; Grava et al., 2006). This regulation prevents both poles from moving toward the bud during metaphase and then prevents the spindle from being pulled all the way into the bud during anaphase. Asymmetric localization of dynein on spindle poles or microtubule plus ends has not yet been reported in animal cells.

Other spindle positioning mechanisms

In the examples of the C. elegans and budding yeast mitotic spindles, long astral microtubules are in contact with the cell cortex. In cells where spindles have no astral microtubules, other mechanisms must be at work. Female meiotic spindles are universally positioned with one spindle pole contacting the oocyte cortex so that one set of chromosomes can be eliminated in a polar body through an extremely asymmetrical division (Fabritius et al., 2011). Female meiotic spindles of at least three animal phyla (Chordata, Nematoda, and Arthropoda), however, have no centrioles in their spindle poles and no apparent astral microtubules. Work in C. elegans and mice suggests that different species have evolved different mechanisms for acentriolar meiotic spindle positioning.

Parallel metaphase meiotic spindles.

The metaphase I and metaphase II spindles of C. elegans (Fig. 4 A) and the metaphase II spindle of mouse (Fig. 4 B) are positioned at the cortex in a parallel orientation, with both poles equidistant from the cortex. In C. elegans, this parallel cortical positioning requires microtubules, kinesin-1, and a worm-specific kinesin-1–binding partner, KCA-1 (Yang et al., 2003, 2005), but is independent of F-actin (Yang et al., 2003). Kinesin-1 and microtubules are also required to move the nucleus to the cortex before germinal vesicle breakdown and to drive transport of yolk granules inward from the cortex, which results in a circular streaming pattern. It has been suggested that kinesin-1 may only move the germinal vesicle to the cortex and that an additional, unidentified pathway moves the spindle over the remaining distance to the cortex and establishes the parallel orientation (McNally et al., 2010). The mouse metaphase II spindle is maintained in a similar parallel orientation at the cortex, but this positioning requires the actin nucleator ARP2/3. ARP2/3 also drives streaming of actin filaments and cytoplasm in a pattern that has been proposed to push the spindle into the cortex to maintain parallel cortical position (Fig. 4 B; Yi et al., 2011).Open in a separate windowFigure 4.A plethora of nonastral spindle positioning mechanisms. (A) Metaphase C. elegans meiotic spindles are positioned in a parallel orientation at the cortex by microtubules and kinesin-1. (B) The mouse metaphase II spindle may be positioned by actin-dependent cytoplasmic streaming. Pole-first migration of the mouse meiosis I spindle to the cortex may be mediated by cargo transport on parallel actin filaments by spindle pole–bound myosin II (C), myosin II–based contraction of anti-parallel actin filaments (D), or pushing forces generated by polymerizing actin filaments nucleated by formin molecules on the spindle (E) or nucleated by formin molecules on the cortex (F). Red arrows indicate the pointed ends of actin filaments. (G) One spindle pole of the early anaphase C. elegans meiotic spindle may be transported to the cortex as cargo by dynein on polarized cytoplasmic microtubules.

Pole first migration of the mouse meiosis I spindle.

Unlike the C. elegans germinal vesicle, the mouse germinal vesicle is centered in the egg at germinal vesicle breakdown. Thus, the meiosis I spindle assembles near the center of the egg then migrates in a pole-first orientation to the nearest cortex so that it never adopts a parallel orientation (Fig. 4 C). This migration requires F-actin (Verlhac et al., 2000) and the actin nucleators Formin 2 (Dumont et al., 2007), Spire 1 and Spire 2 (Pfender et al., 2011), and ARP2/3 (Sun et al., 2011), but the mechanism of movement remains unclear. Schuh and Ellenberg (2008) demonstrated the existence of actin bundles extending between the spindle and an invagination of the cortex during spindle migration. The invagination indicated a pulling mechanism, and Schuh and Ellenberg (2008) suggested that myosin II on the spindle poles might walk on a discontinuous actin network with barbed ends oriented toward the cortex (Fig. 4 C). In support of this model, the Rho kinase inhibitor ML7 eliminated spindle pole staining by an antibody specific for phosphorylated myosin regulatory light chain and blocked spindle migration (Schuh and Ellenberg, 2008). However, Li et al. (2008) found that the myosin ATPase inhibitor, blebbistatin, had no effect on spindle migration even though it completely blocked polar body extrusion (cytokinesis). Because myosin II typically acts by forming bipolar thick filaments that exert contractile force on antiparallel actin filaments, a myosin II–based model would make more sense if myosin II was concentrated on antiparallel actin bundles extending between the spindle and cortex (Fig. 4 D). Myosin V is more typically associated with the transport of cargo on uniformly oriented actin filaments, and a recent study has shown that myosin V drives transport of secretory vesicles outward toward the cortex in germinal vesicle stage oocytes (Schuh, 2011). This study at least suggests that the cytoplasmic actin meshwork has a net polarity with barbed ends toward the cortex, a prerequisite for a myosin cargo transport model (Fig. 4 C).Li et al. (2008) proposed a completely different mechanism in which F-actin nucleated near the chromosomes generates a cloud of F-actin that pushes the spindle toward the cortex (Fig. 4 E) in a manner analogous to Listeria monocytogenes motility (Lambrechts et al., 2008). Support for this pushing model comes from imaging of an actin cloud behind the migrating spindle and localization of Formin 2 around the spindle (Li et al., 2008). In addition, Formin 2 overexpression causes invaginations in the nuclear envelope, which is consistent with inward pushing from the cortex, rather than protrusions that would be consistent with pulling forces from the cortex (Azoury et al., 2011). Formin 2 is symmetrical around the cortex during prophase but clears from the cortex in front of the migrating spindle, which is consistent with nucleation-based pushing from behind (Fig. 4 F; Azoury et al., 2011). As previously mentioned, cortical stiffness is a prerequisite for cortical pulling mechanisms because pulling on an unsupported plasma membrane should cause the membrane to invaginate inward instead of the spindle moving outward. Strikingly, cortical stiffness of the mouse oocyte decreases sixfold during spindle migration (Larson et al., 2010). Clearly, more work is required to resolve the mechanism of pole-first spindle migration in the mouse oocyte.

Rotation of the parallel metaphase spindle to a perpendicular anaphase spindle.

Activation of the anaphase-promoting complex results in rotation of the parallel metaphase meiotic spindle to a perpendicular orientation in both meiotic divisions of C. elegans, whereas fertilization induces rotation during meiosis II in mouse. In kinesin-1–depleted C. elegans embryos, the metaphase I spindle is far from the cortex and initiates pole-first migration to the cortex at the same time that wild-type rotation initiates (Yang et al., 2005). Both spindle rotation and late spindle migration in a kinesin mutant require cytoplasmic dynein (Ellefson and McNally, 2009, 2011). These results indicate that spindle rotation is simply migration of one spindle pole toward the cortex (analogous to spindle migration during mouse meiosis I). However, unlike dynein-dependent migration of one spindle pole toward the cortex during C. elegans mitosis or HeLa cell mitosis, C. elegans meiotic spindle rotation does not require GPR-1,2 (van der Voet et al., 2009). One possible model for C. elegans meiotic spindle rotation is that cytoplasmic dynein, which accumulates on both spindle poles just before and during rotation, transports one spindle pole as cargo on cytoplasmic microtubules with minus ends anchored at the cortex (Fig. 4 G). The orientation of these microtubules is inferred from the direction of kinesin-dependent yolk granule movement (McNally et al., 2010) and hook decoration in Xenopus laevis oocytes (Pfeiffer and Gard, 1999). This model is essentially the same as the myosin cargo transport model proposed for mouse meiosis I (Fig. 4 C). Rotation of the mouse meiosis II spindle is actin dependent (Maro et al., 1984) and myosin II dependent (Matson et al., 2006; Wang et al., 2011), but the mechanism is unknown.

Unifying themes and future directions

Work in HeLa cells and budding yeast suggests that negative feedback loops might generally lead to spindle centering and that positive feedback loops might generally lead to asymmetrical spindle positioning. Whereas the recent x-ray crystal structures of cytoplasmic dynein (Carter et al., 2011; Kon et al., 2012) have revealed great insights into how the motor walks, they have revealed little about how the motor is locally activated and anchored at the cortex or how GPR-1/LIN-5 switches the motor from a side-on motor to an end-on motor. More attention needs to be focused on the distinction between cortical stiffness and cortical anchoring required in any cortical pulling mechanism. The nonastral spindle positioning mechanisms acting in oocytes of mouse and C. elegans will require a much more detailed understanding of the polarity of cytoplasmic actin filaments and cytoplasmic microtubules.     

Cytoplasmic dynein's mitotic spindle pole localization requires a functional anaphase-promoting complex, gamma-tubulin, and NUDF/LIS1 in Aspergillus nidulans

In Aspergillus nidulans, cytoplasmic dynein and NUDF/LIS1 are found at the spindle poles during mitosis, but they seem to be targeted to this location via different mechanisms. The spindle pole localization of cytoplasmic dynein requires the function of the anaphase-promoting complex (APC), whereas that of NUDF does not. Moreover, although NUDF's localization to the spindle poles does not require a fully functional dynein motor, the function of NUDF is important for cytoplasmic dynein's targeting to the spindle poles. Interestingly, a gamma-tubulin mutation, mipAR63, nearly eliminates the localization of cytoplasmic dynein to the spindle poles, but it has no apparent effect on NUDF's spindle pole localization. Live cell analysis of the mipAR63 mutant revealed a defect in chromosome separation accompanied by unscheduled spindle elongation before the completion of anaphase A, suggesting that gamma-tubulin may recruit regulatory proteins to the spindle poles for mitotic progression. In A. nidulans, dynein is not apparently required for mitotic progression. In the presence of a low amount of benomyl, a microtubule-depolymerizing agent, however, a dynein mutant diploid strain exhibits a more pronounced chromosome loss phenotype than the control, indicating that cytoplasmic dynein plays a role in chromosome segregation.     

Dynein light chain 1 and a spindle-associated adaptor promote dynein asymmetry and spindle orientation

The cytoplasmic dynein motor generates pulling forces to center and orient the mitotic spindle within the cell. During this positioning process, dynein oscillates from one pole of the cell cortex to the other but only accumulates at the pole farthest from the spindle. Here, we show that dynein light chain 1 (DYNLL1) is required for this asymmetric cortical localization of dynein and has a specific function defining spindle orientation. DYNLL1 interacted with a spindle-microtubule–associated adaptor formed by CHICA and HMMR via TQT motifs in CHICA. In cells depleted of CHICA or HMMR, the mitotic spindle failed to orient correctly in relation to the growth surface. Furthermore, CHICA TQT motif mutants localized to the mitotic spindle but failed to recruit DYNLL1 to spindle microtubules and did not correct the spindle orientation or dynein localization defects. These findings support a model where DYNLL1 and CHICA-HMMR form part of the regulatory system feeding back spindle position to dynein at the cell cortex.     

The cortical protein Num1p is essential for dynein-dependent interactions of microtubules with the cortex

In budding yeast, the mitotic spindle moves into the neck between the mother and bud via dynein-dependent sliding of cytoplasmic microtubules along the cortex of the bud. How dynein and microtubules interact with the cortex is unknown. We found that cells lacking Num1p failed to exhibit dynein-dependent microtubule sliding in the bud, resulting in defective mitotic spindle movement and nuclear segregation. Num1p localized to the bud cortex, and that localization was independent of microtubules, dynein, or dynactin. These data are consistent with Num1p being an essential element of the cortical attachment mechanism for dynein-dependent sliding of microtubules in the bud.     

Mouse polo-like kinase 1 associates with the acentriolar spindle poles, meiotic chromosomes and spindle midzone during oocyte maturation

We have examined the dynamics of the localisation of the polo-like kinase 1 (Plk1) during maturation of the mouse oocyte. Levels of Plk1 protein increase following germinal vesicle breakdown, at which time the enzyme begins to accumulate at discrete positions on the condensing chromosomes and, subsequently, at the poles of the meiotic spindle, which moves towards the cortex of the egg. Interestingly, at metaphase in both meiotic divisions, Plk1 shows a punctate localisation along the broad spindle poles. Moreover, the punctate distribution of Plk1 on the meiotic chromosomes appears at early anaphase to correspond to the centromeric regions. The protein relocates to the spindle midzone during late anaphase and then associates with the midbody at telophase. We have confirmed the specific pattern of immuno-localisation seen in fixed preparations by observing the distribution of Plk1 tagged with green fluorescent protein in living oocytes. We discuss the localisation of the enzyme in light of the structure of the spindle poles, which are known to lack centrioles, and the highly asymmetric nature of the meiotic divisions. Received: 8 August 1998 / Accepted: 13 September 1998     

Kinesin-dependent transport results in polarized migration of the nucleus in oocytes and inward movement of yolk granules in meiotic embryos

During female meiosis, meiotic spindles are positioned at the oocyte cortex to allow expulsion of chromosomes into polar bodies. In C. elegans, kinesin-dependent translocation of the entire spindle to the cortex precedes dynein-dependent rotation of one spindle pole toward the cortex. To elucidate the role of kinesin-1 in spindle translocation, we examined the localization of kinesin subunits in meiotic embryos. Surprisingly, kinesin-1 was not associated with the spindle and instead was restricted to the cytoplasm in the middle of the embryo. Yolk granules moved on linear tracks, in a kinesin-dependent manner, away from the cortex, resulting in their concentration in the middle of the embryo where the kinesin was concentrated. These results suggest that cytoplasmic microtubules might be arranged with plus ends extending inward, away from the cortex. This microtubule arrangement would not be consistent with direct transport of the meiotic spindle toward the cortex by kinesin-1. In maturing oocytes, the nucleus underwent kinesin-dependent migration to the future site of spindle attachment at the anterior cortex. Thus the spindle translocation defect observed in kinesin-1 mutants may be a result of failed nuclear migration, which places the spindle too far from the cortex for the spindle translocation mechanism to function.     

Visualization of Mad2 dynamics at kinetochores, along spindle fibers, and at spindle poles in living cells

The spindle checkpoint prevents errors in chromosome segregation by inhibiting anaphase onset until all chromosomes have aligned at the spindle equator through attachment of their sister kinetochores to microtubules from opposite spindle poles. A key checkpoint component is the mitotic arrest-deficient protein 2 (Mad2), which localizes to unattached kinetochores and inhibits activation of the anaphase-promoting complex (APC) through an interaction with Cdc20. Recent studies have suggested a catalytic model for kinetochore function where unattached kinetochores provide sites for assembling and releasing Mad2-Cdc20 complexes, which sequester Cdc20 and prevent it from activating the APC. To test this model, we examined Mad2 dynamics in living PtK1 cells that were either injected with fluorescently labeled Alexa 488-XMad2 or transfected with GFP-hMAD2. Real-time, digital imaging revealed fluorescent Mad2 localized to unattached kinetochores, spindle poles, and spindle fibers depending on the stage of mitosis. FRAP measurements showed that Mad2 is a transient component of unattached kinetochores, as predicted by the catalytic model, with a t(1/2) of approximately 24-28 s. Cells entered anaphase approximately 10 min after Mad2 was no longer detectable on the kinetochores of the last chromosome to congress to the metaphase plate. Several observations indicate that Mad2 binding sites are translocated from kinetochores to spindle poles along microtubules. First, Mad2 that bound to sites on a kinetochore was dynamically stretched in both directions upon microtubule interactions, and Mad2 particles moved from kinetochores toward the poles. Second, spindle fiber and pole fluorescence disappeared upon Mad2 disappearance at the kinetochores. Third, ATP depletion resulted in microtubule-dependent depletion of Mad2 fluorescence at kinetochores and increased fluorescence at spindle poles. Finally, in normal cells, the half-life of Mad2 turnover at poles, 23 s, was similar to kinetochores. Thus, kinetochore-derived sites along spindle fibers and at spindle poles may also catalyze Mad2 inhibitory complex formation.     

Assembly of a protein sharing epitopes with sperm dynein heavy chains into meiotic spindle in the prometaphase starfish oocyte

Starfish oocyte meiosis provides a good system for studying the mechanism for prometaphase chromosome movement. Since a protein sharing epitopes with sperm dynein might be a force generator for mitosis, the contribution of such a protein was assessed in this movement. Specific antibodies to heavy chains (HCs) and intermediate chains (ICs) of dynein subunits were affinity-purified from whole antidynein serum. We confirmed that the oocytes contain several polypeptides identical to sperm dynein subunits. The anti-HCs binding to in situ antigen was examined in the oocytes permeabilized with detergent at appropriate stages of maturation with special reference to tubulin and chromosomes, and the meiotic apparatus-establishing process was described in terms of a force generator (oocyte dynein). Before resumption of maturation, dynein HCs were particularly associated with prophase chromosomes within the germinal vesicle (GV). After GV breakdown, there was a striking local accumulation of dynein HCs in the "fading GV" (nuclear matrix). When chromosomes were pulled toward the central area between 2 asters, dynein was accumulated at first at the presumptive equator and then moved to the poles, showing uneven localization on the meiotic spindle.     

PtdIns(3,4,5)P3 regulates spindle orientation in adherent cells

Cultured adherent cells divide on the substratum, leading to formation of the cell monolayer. However, how the orientation of this anchorage-dependent cell division is regulated remains unknown. We have previously shown that integrin-dependent adhesion orients the spindle parallel to the substratum, which ensures this anchorage-dependent cell division. Here, we show that phosphatidylinositol-3,4,5-triphosphate (PtdIns(3,4,5)P3) is essential for this spindle orientation control. In metaphase, PtdIns(3,4,5)P3 is accumulated in the midcortex in an integrin-dependent manner. Inhibition of phosphatidylinositol-3-OH kinase (PI(3)K) reduces the accumulation of PtdIns(3,4,5)P3 and induces spindle misorientation. Introduction of PtdIns(3,4,5)P3 to these cells restores the midcortical accumulation of PtdIns(3,4,5)P3 and proper spindle orientation. PI(3)K inhibition causes dynein-dependent spindle rotations along the z-axis, resulting in spindle misorientation. Moreover, dynactin, a dynein-binding partner, is accumulated in the midcortex in a PtdIns(3,4,5)P3-dependent manner. We propose that PtdIns(3,4,5)P3 directs dynein/dynactin-dependent pulling forces on spindles to the midcortex, and thereby orients the spindle parallel to the substratum.     

F-actin asymmetry and the endoplasmic reticulum–associated TCC-1 protein contribute to stereotypic spindle movements in the Caenorhabditis elegans embryo

The microtubule spindle apparatus dictates the plane of cell cleavage in animal cells. During development, dividing cells control the position of the spindle to determine the size, location, and fate of daughter cells. Spindle positioning depends on pulling forces that act between the cell periphery and astral microtubules. This involves dynein recruitment to the cell cortex by a heterotrimeric G-protein α subunit in complex with a TPR-GoLoco motif protein (GPR-1/2, Pins, LGN) and coiled-coil protein (LIN-5, Mud, NuMA). In this study, we searched for additional factors that contribute to spindle positioning in the one-cell Caenorhabditis elegans embryo. We show that cortical actin is not needed for Gα–GPR–LIN-5 localization and pulling force generation. Instead, actin accumulation in the anterior actually reduces pulling forces, possibly by increasing cortical rigidity. Examining membrane-associated proteins that copurified with GOA-1 Gα, we found that the transmembrane and coiled-coil domain protein 1 (TCC-1) contributes to proper spindle movements. TCC-1 localizes to the endoplasmic reticulum membrane and interacts with UNC-116 kinesin-1 heavy chain in yeast two-hybrid assays. RNA interference of tcc-1 and unc-116 causes similar defects in meiotic spindle positioning, supporting the concept of TCC-1 acting with kinesin-1 in vivo. These results emphasize the contribution of membrane-associated and cortical proteins other than Gα–GPR–LIN-5 in balancing the pulling forces that position the spindle during asymmetric cell division.     

Cell cycle-regulated cortical dynein/dynactin promotes symmetric cell division by differential pole motion in anaphase

In cultured mammalian cells, how dynein/dynactin contributes to spindle positioning is poorly understood. To assess the role of cortical dynein/dynactin in this process, we generated mammalian cell lines expressing localization and affinity purification (LAP)-tagged dynein/dynactin subunits from bacterial artificial chromosomes and observed asymmetric cortical localization of dynein and dynactin during mitosis. In cells with asymmetrically positioned spindles, dynein and dynactin were both enriched at the cortex distal to the spindle. NuMA, an upstream targeting factor, localized asymmetrically along the cell cortex in a manner similar to dynein and dynactin. During spindle motion toward the distal cortex, dynein and dynactin were locally diminished and subsequently enriched at the new distal cortex. At anaphase onset, we observed a transient increase in cortical dynein, followed by a reduction in telophase. Spindle motion frequently resulted in cells entering anaphase with an asymmetrically positioned spindle. These cells gave rise to symmetric daughter cells by dynein-dependent differential spindle pole motion in anaphase. Our results demonstrate that cortical dynein and dynactin dynamically associate with the cell cortex in a cell cycle-regulated manner and are required to correct spindle mispositioning in LLC-Pk1 epithelial cells.     

Chromosomal influence on meiotic spindle assembly: abnormal meiosis I in female Mlh1 mutant mice.

In mouse oocytes, the first meiotic spindle is formed through the action of multiple microtubule organizing centers rather than a pair of centrosomes. Although the chromosomes are thought to play a major role in organizing the meiotic spindle, it remains unclear how a stable bipolar spindle is established. We have studied the formation of the first meiotic spindle in murine oocytes from mice homozygous for a targeted disruption of the DNA mismatch repair gene, Mlh1. In the absence of the MLH1 protein meiotic recombination is dramatically reduced and, as a result, the vast majority of chromosomes are present as unpaired univalents at the first meiotic division. The orientation of these univalent chromosomes at prometaphase suggests that they are unable to establish stable bipolar spindle attachments, presumably due to the inability to differentiate functional kinetochore domains on individual sister chromatids. In the presence of this aberrant chromosome behavior a stable first meiotic spindle is not formed, the spindle poles continue to elongate, and the vast majority of cells never initiate anaphase. These results suggest that, in female meiotic systems in which spindle formation is based on the action of multiple microtubule organizing centers, the chromosomes not only promote microtubule polymerization and organization but their attachment to opposite spindle poles acts to stabilize the forming spindle poles.