ITO‐Free and Fully Solution‐Processed Semitransparent Organic Solar Cells with High Fill Factors

Organic photovoltaic (OPV) solar cells that can be simply processed from solution are in the focus of the academic and industrial community because of their enormous potential to reduce cost. One big challenge in developing a fully solution‐processed OPV technology is the design of a well‐performing electrode system, allowing the replacement of ITO. Several solution‐processed electrode systems were already discussed, but none of them could match the performance of ITO. Here, we report efficient ITO‐free and fully solution‐processed semitransparent inverted organic solar cells based on silver nanowire (AgNW) electrodes. To demonstrate the potential of these AgNW electrodes, they were employed as both the bottom and top electrodes. Record devices achieved fill factors as high as 63.0%, which is comparable to ITO based reference devices. These results provide important progress for fully printed organic solar cells and indicate that ITO‐free, transparent as well as non‐transparent organic solar cells can indeed be fully solution‐processed without losses.     

Impermeable Charge Transport Layers Enable Aqueous Processing on Top of Perovskite Solar Cells

Several applications of perovskite solar cells (PSCs) demand a semitransparent top electrode to afford top‐illumination or see‐through devices. Transparent conductive oxides, such as indium tin oxide (ITO), typically require postdeposition annealing at elevated temperatures, which would thermally decompose the perovskite. In contrast, silver nanowires (AgNWs) in dispersions of water would be a very attractive alternative that can be deposited at ambient conditions. Water is environmentally friendly without safety concerns associated with alcohols, such as flammability. Due to the notorious moisture sensitivity of lead‐halide perovskites, aqueous processing of functional layers, such as electrodes, on top of a perovskite device stack is elusive. Here, impermeable electron transport layers (ETLs) are shown to enable the deposition of semitransparent AgNW electrodes from green aqueous dispersions on top of the perovskite cell without damage. The polyvinylpyrrolidone (PVP) capping agent of the AgNWs is found to cause a work–function shift and an energy barrier between the AgNWs and the adjacent ETL. Thus, a high carrier density (≈10¹⁸ cm^?3) in the ETL is required to achieve well‐behaved J/V characteristics free of s‐shapes. Ultimately, semitransparent PSCs are demonstrated that provide an efficiency of 17.4%, which is the highest efficiency of semitransparent p‐i‐n perovskite solar cells with an AgNW top electrode.     

Four‐Terminal Perovskite/Silicon Multijunction Solar Modules

Multijunction solar cells employing perovskite and crystalline‐silicon (c‐Si) light absorbers bear the exciting potential to surpass the efficiency limit of market‐leading single‐junction c‐Si solar cells. However, scaling up this technology and maintaining high efficiency over large areas are challenging as evidenced by the small‐area perovskite/c‐Si multijunction solar cells reported so far. In this work, a scalable four‐terminal multijunction solar module design employing a 4 cm² semitransparent methylammonium lead triiodide perovskite solar module stacked on top of an interdigitated back contact c‐Si solar cell of identical area is demonstrated. With a combination of optimized transparent electrodes and efficient module design, the perovskite/c‐Si multijunction solar modules exhibit power conversion efficiencies of 22.6% on 0.13 cm² and 20.2% on 4 cm² aperture area. Furthermore, a detailed optoelectronic loss analysis along with strategies to enhance the performance is discussed.     

Spray Deposition of Silver Nanowire Electrodes for Semitransparent Solid‐State Dye‐Sensitized Solar Cells

Transparent top electrodes for solid‐state dye‐sensitized solar cells (ssDSCs) allow for fabrication of mechanically stacked ssDSC tandems, partially transparent ssDSCs for building integration, and ssDSCs on metal foil substrates. A solution‐processed, highly transparent, conductive electrode based on PEDOT:PSS [poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)] and spray‐deposited silver nanowires (Ag NWs) is developed as an effective top contact for ssDSCs. The electrode is solution‐deposited using conditions and solvents that do not damage or dissolve the underlying ssDSC and achieves high performance: a peak transmittance of nearly 93% at a sheet resistance of 18 Ω/square – all without any annealing that would harm the ssDSC. The role of the PEDOT:PSS in the electrode is twofold: it ensures ohmic contact between the ssDSC 2,2′,7,7′‐tetrakis‐(N,N‐di‐p‐methoxyphenylamine)9,9′‐spirobifluorene (Spiro‐OMeTAD) overlayer and the silver nanowires and it decreases the series resistance of the device. Semitransparent ssDSCs with D35 dye fabricated using this Ag NW/PEDOT:PSS transparent electrode show power conversion efficiencies of 3.6%, nearly as high as a reference device using an evaporated silver electrode (3.7%). In addition, the semitransparent ssDSC shows high transmission between 700–1100 nm, a necessity for use in efficient tandem devices. Such an electrode, in combination with efficient ssDSCs or hybrid perovskite‐sensitized solar cells, can allow for the fabrication of efficient, cost‐effective tandem photovoltaics.     

Flexible and Semitransparent Organic Solar Cells

Flexible and semitransparent organic solar cells (OSCs) have been regarded as the most promising photovoltaic devices for the application of OSCs in wearable energy resources and building‐integrated photovoltaics. Therefore, the flexible and semitransparent OSCs have developed rapidly in recent years through the synergistic efforts in developing novel flexible bottom or top transparent electrodes, designing and synthesizing high performance photoactive layer and low temperature processed electrode buffer layer materials, and device architecture engineering. To date, the highest power conversion efficiencies have reached over 10% of the flexible OSCs and 7.7% with average visible transmittance of 37% for the semitransparent OSCs. Here, a comprehensive overview of recent research progresses and perspectives on the related materials and devices of the flexible and semitransparent OSCs is provided.     

High‐Performance Ta2O5/Al‐Doped Ag Electrode for Resonant Light Harvesting in Efficient Organic Solar Cells

A efficient indium tin oxide (ITO)‐free transparent electrode based on an improved Ag film is designed by introducing small amount of Al during co‐deposition, producing ultrathin and smooth Ag film with low loss. A transparent electrode as thin as 4 nm is achieved by depositing the film on top of Ta₂O₅ layer, and organic solar cells based on such ultrathin electrode are built, producing power conversion efficiency over 7%. The device efficiency can be optimized by simply tuning Ta₂O₅ layer thickness external to the organic photovoltaic (OPV) structure to create an optical cavity resonance inside the photoactive layer. Therefore Ta₂O₅/Al‐doped Ag films function as a high‐performance electrode with high transparency, low resistance, improved photon management capability and mechanical flexibility.     

Progress in Tandem Solar Cells Based on Hybrid Organic–Inorganic Perovskites

Owing to their high efficiency, low‐cost solution‐processability, and tunable bandgap, perovskite solar cells (PSCs) made of hybrid organic‐inorganic perovskite (HOIP) thin films are promising top‐cell candidates for integration with bottom‐cells based on Si or other low‐bandgap solar‐cell materials to boost the power conversion efficiency (PCE) beyond the Shockley‐Quiesser (S‐Q) limit. In this review, recent progress in such tandem solar cells based on the emerging PSCs is summarized and reviewed critically. Notable achievements for different tandem solar cell configurations including mechanically‐stacked, optical coupling, and monolithically‐integrated with PSCs as top‐cells are described in detail. Highly‐efficient semitransparent PSC top‐cells with high transmittance in near‐infrared (NIR) region are critical for tandem solar cells. Different types of transparent electrodes with high transmittance and low sheet‐resistance for PSCs are reviewed, which presents a grand challenge for PSCs. The strategies to obtain wide‐bandgap PSCs with good photo‐stability are discussed. The PCE reduction due to reflection loss, parasitic absorption, electrical loss, and current mismatch are analyzed to provide better understanding of the performance of PSC‐based tandem solar cells.     

Efficient Non‐Fullerene Organic Photovoltaic Modules Incorporating As‐Cast and Thickness‐Insensitive Photoactive Layers

In this work, a new combination of a wide bandgap polymer poly[4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)benzo[1,2‐b:4,5‐b′]‐dithiophene‐alt‐N‐(2‐hexyldecyl)‐5′5‐bis[3‐(decylthio)thiophene‐2‐yl]‐2′2‐bithiophene‐3′3‐dicarboximide] (PBTIBDTT) and a non‐fullerene small molecule acceptor based on a bulky seven‐ring fused core (indacenodithieno[3,2‐b]thiophene) end‐capped with 2‐(3‐oxo‐2,3‐dihydroinden‐1‐ylidene)malononitrile groups with one fluorine substituent (ITIC‐F) is proposed, and as‐cast non‐fullerene organic solar cells (NFOSCs) with 11.2% efficiency are achieved. The device efficiencies are also insensitive to the variation of photoactive layer (PAL) thickness and can maintain over 9% efficiency as PAL thickness increases to 350 nm, which is one of the best results for as‐cast organic solar cells. More importantly, non‐fullerene organic photovoltaic (OPV) modules are demonstrated via laser ablation technique for the first time, which delivers a record efficiency of 8.6% (with active area of 3.48 cm²) among large‐area OPV modules. Furthermore, the morphology and performance evolutions of the as‐cast NFOSCs and the ones processed with solvent additive are systematically investigated. The results demonstrate the great advantage of as‐cast solar cells in achieving constant morphology and high performance with thick PALs. The NFOSCs fabricated with simple procedure, insensitive to film thickness and compatible with large‐area OPV modules, show significant potential for application the future.     

High‐Performance Semitransparent Tandem Solar Cell of 8.02% Conversion Efficiency with Solution‐Processed Graphene Mesh and Laminated Ag Nanowire Top Electrodes

A high‐performance semitransparent tandem solar cell that uses solution‐processed graphene mesh and laminated Ag NW as a transparent anode and cathode, respectively, is demonstrated. The laminated top electrode can be deposited without causing any damage to the underneath organic solar cells. Power conversion efficiencies of 8.02% and 6.47% are obtained when the light is projected from the solution‐processed graphene mesh and laminated AgNW, respectively. The performance of the tandem cell is found to be comparable to a tandem solar cell fabricated using commercially available indium tin oxide. These findings offer a high‐performance device and open a new pathway in searching for a potential replacement to the frequently used transparent conducting electrodes.     

Parallelized Nanopillar Perovskites for Semitransparent Solar Cells Using an Anodized Aluminum Oxide Scaffold

Semitransparent solar cells have attracted significant attention for practical applications, such as windows in buildings and automobiles. Here, semitransparent, highly efficient, 1D nanostructured perovskite solar cells are demonstrated employing anodized aluminum oxide (AAO) as a scaffold layer. The parallel nanopillars in the perovskite layer enable construction of haze‐free semitransparent devices without any hysteresis behavior. By controlling the pore size in the AAO, the volume occupied by the perovskite layer can be precisely varied, and the color neutrality of the resulting devices can be achieved. With the incorporation of a transparent cathodic electrode (indium tin oxide) with a buffer layer (MoO_x), a highly efficient semitransparent nanopillared perovskite solar cell is achievable with a power‐conversion efficiency of 9.6% (7.5%) and a whole device average visible light transmittance of 33.4% (41.7%). To determine the role of the scaffold layer in improving the photoelectrical properties of the cell, impedance spectroscopy analyses are performed, revealing that the AAO‐structured perovskite layer suppresses internal ion diffusion and enables critical improvements in long‐term stability under continuous illumination.     

Dual Interfacial Modifications Enable High Performance Semitransparent Perovskite Solar Cells with Large Open Circuit Voltage and Fill Factor

In this work, both anode and cathode interfaces of p‐i‐n CH₃NH₃PbI₃ perovskite solar cells (PVSCs) are simultaneously modified to achieve large open‐circuit voltage (V_oc) and fill factor (FF) for high performance semitransparent PVSCs (ST‐PVSCs). At the anode, modified NiO serves as an efficient hole transport layer with appropriate surface property to promote the formation of smooth perovskite film with high coverage. At the cathode, a fullerene bisadduct, C₆₀(CH₂)(Ind), with a shallow lowest unoccupied molecular orbital level, is introduced to replace the commonly used phenyl‐C₆₁‐butyric acid methyl ester (PCBM) as an alternative electron transport layer in PVSCs for better energy level matching with the conduction band of the perovskite layer. Therefore, the V_oc, FF and power conversion efficiency (PCE) of the PVSCs increase from 1.05 V, 0.74 and 16.2% to 1.13 V, 0.80 and 18.1% when the PCBM is replaced by C₆₀(CH₂)(Ind). With the advantages of high V_oc and FF, ST‐PVSCs are also fabricated using an ultrathin transparent Ag as cathode, showing an encouraging PCEs of 12.6% with corresponding average visible transmittance (AVT) over 20%. These are the highest PCEs reported for ST‐PVSCs with similar AVTs paving the way for using ST‐PVSCs as power generating windows.     

Breaking the 10% Efficiency Barrier in Organic Photovoltaics: Morphology and Device Optimization of Well‐Known PBDTTT Polymers

With the advances in organic photovoltaics (OPVs), the invention of model polymers with superior properties and wide applicability is of vital importance to both the academic and industrial communities. The recent inspiring advances in OPV research have included the emergence of poly(benzodithiophene‐co‐thieno[3,4‐b]thiophene) (PBDTTT)‐based materials. Through the combined efforts on PBDTTT polymers, over 10% efficiencies have been realized recently in various types of OPV devices. This review attempts to critically summarize the recent advances with respect to five well‐known PBDTTT polymers and their design considerations, basic properties, photovoltaic performance, as well as device application in conventional, inverted, tandem solar cells. These PBDTTT polymers also make great contributions to the rapid advances in the field of emerging ternary blends and fullerene‐free OPVs with top performances. Addtionally, new challenges in developing novel photovoltaic polymers with more superior properties are prospected. More importantly, the research of highly efficient PBDTTT‐based polymers provides useful insights and builds fundamentals for new types of OPV applications with various architectures.     

Spectral Engineering of Semitransparent Polymer Solar Cells for Greenhouse Applications

In this study, a wavelength selective semitransparent polymer solar cell (ST‐PSC) with a proper transmission spectrum for plant growth is proposed for greenhouse applications. A ternary strategy combining a wide bandgap polymer donor with a near‐infrared absorbing nonfullerene acceptor and a high electron mobility fullerene acceptor is introduced to achieve PSCs with power conversion efficiency (PCE) over 10%. The addition of PC₇₁BM into J52:IEICO‐4F binary blend contributes to the suppressed trap‐assisted recombination, enhanced charge extraction, and improved open‐circuit voltage simultaneously. ST‐PSC based on the J52:IEICO‐4F:PC₇₁BM ternary blend shows an optimized performance with PCE of 7.75% and a defined crop growth factor of 24.8%. Such high‐performance ST‐PSC is achieved by carefully engineering the absorption spectrum of the light harvesting materials. As a result, the transmission spectra of the semitransparent devices are well‐matched with the absorption spectra of the photoreceptors, such as chlorophylls, in green plants, which provides adequate lighting conditions for photosynthesis and plant growth, and therefore making it a competitive candidate for photovoltaic greenhouse applications.     

Over 17% Efficiency Stand‐Alone Solar Water Splitting Enabled by Perovskite‐Silicon Tandem Absorbers

Realizing solar‐to‐hydrogen (STH) efficiencies close to 20% using low‐cost semiconductors remains a major step toward accomplishing the practical viability of photoelectrochemical (PEC) hydrogen generation technologies. Dual‐absorber tandem cells combining inexpensive semiconductors are a promising strategy to achieve high STH efficiencies at a reasonable cost. Here, a perovskite photovoltaic biased silicon (Si) photoelectrode is demonstrated for highly efficient stand‐alone solar water splitting. A p⁺nn⁺ ‐Si/Ti/Pt photocathode is shown to present a remarkable photon‐to‐current efficiency of 14.1% under biased condition and stability over three days under continuous illumination. Upon pairing with a semitransparent mixed perovskite solar cell of an appropriate bandgap with state‐of‐the‐art performance, an unprecedented 17.6% STH efficiency is achieved for self‐driven solar water splitting. Modeling and analysis of the dual‐absorber PEC system reveal that further work into replacing the noble‐metal catalyst materials with earth‐abundant elements and improvement of perovskite fill factor will pave the way for the realization of a low‐cost high‐efficiency PEC system.     

Efficient Polymer Solar Cells on Opaque Substrates with a Laminated PEDOT:PSS Top Electrode

Solution processed polymer:fullerene solar cells on opaque substrates have been fabricated in conventional and inverted device configurations. Opaque substrates, such as insulated steel and metal covered glass, require a transparent conducting top electrode. We demonstrate that a high conducting (900 S cm^?1) PEDOT:PSS layer, deposited by a stamp‐transfer lamination technique using a PDMS stamp, in combination with an Ag grid electrode provides a proficient and versatile transparent top contact. Lamination of large size PEDOT:PSS films has been achieved on variety of surfaces resulting in ITO‐free solar cells. Power conversion efficiencies of 2.1% and 3.1% have been achieved for P3HT:PCBM layers in inverted and conventional polarity configurations, respectively. The power conversion efficiency is similar to conventional glass/ITO‐based solar cells. The high fill factor (65%) and the unaffected open‐circuit voltage that are consistently obtained in thick active layer inverted geometry devices, demonstrate that the laminated PEDOT:PSS top electrodes provide no significant potential or resistive losses.     

Carrier‐Selectivity‐Dependent Charge Recombination Dynamics in Organic Photovoltaic Cells with a Ferroelectric Blend Interlayer

Interfacial energetics determines the performance of organic photovoltaic (OPV) cells based on a thin film of organic semiconductor blends. Here, an approach to modulating the “carrier selectivity” at the charge collecting interfaces and the consequent variations in the nongeminate charge carrier recombination dynamics in OPV devices are demonstrated. A ferroelectric blend interfacial layer composed of a solution‐processable ferroelectric poly­mer and a wide bandgap semiconductor is introduced as a tunable electron selective layer in inverted OPV devices with non‐Ohmic contact electrodes. The direct rendering of dipole alignment within the ferroelectric blend layer is found to increase the carrier selectivity of the charge collecting interfaces up to two orders of magnitude. Transient photovoltaic analyses reveal that the increase of carrier selectivity significantly reduces the diffusion and recombination among minority carriers in the vicinity of the electrodes, giving rise to the 85% increased charge carrier lifetime. Furthermore, the carrier‐selective charge extraction leads to the constitution of the internal potential within the devices, even with energetically identical cathodes and anodes. With these carrier‐selectivity‐controlled interlayers, the devices based on various photoactive materials commonly display significant increments in the device performances, especially with the high fill factor of up to 0.76 under optimized conditions.     

Evaluation of Electron Donor Materials for Solution‐Processed Organic Solar Cells via a Novel Figure of Merit

Organic photovoltaic (OPV) technology offers many advantages, although no commercial applications have been achieved after more than a decade of intensive research and development. Several challenges have yet to be overcome including high power conversion efficiency (PCE), good processability, low cost, and excellent long‐term stability, and so on. In this article, these fundamental challenges are significantly addressed by surveying and analyzing a new merit factor for material applied accessibility containing three parameters: synthetic complexity, device efficiency, and photostability. Thirty‐five donor small molecules are introduced to assess their synthetic accessibility. Furthermore, the PCEs and device photostability of these molecules are carried out, and further measured under one sun illumination within 200 h, respectively. Combining with the characteristics of these three factors, investigated molecules are ranked according to an industrial figure of merit (i‐FOM), while some guidelines for the material design and synthesis are given. It is suggested that a PCE of >14% and an i‐FOM of >20% via active material engineering are realistic for possible industry future of OPV. Along with the systematic study, it is believed that this i‐FOM can be taken into consideration at an early stage of molecular design and provides valuable insight for efficient evaluation of photovoltaic materials for possible commercial applications.     

Efficient,Large Area,and Thick Junction Polymer Solar Cells with Balanced Mobilities and Low Defect Densities

The high power conversion efficiencies (PCEs) of laboratory‐scale polymer‐based organic solar cells are yet to translate to large area modules because of a number of factors including the relatively large sheet resistance of available transparent conducting electrodes (TCEs), and the high defect densities associated with thin organic semiconductor junctions. The TCE problem limits device architectures to narrow connected strips (<1 cm) causing serious fabrication difficulties and extra costs. Thin junctions are required because of poor charge transport (imbalanced mobilities) in the constituent organic semiconductors. These issues are addressed using a combination of approaches to create thick junctions conformally coated on low sheet resistance metal grid TCEs. An essential feature of these thick junctions is balanced carrier mobilities, which affords high fill factors and efficient carrier extraction. Conformal coating is achieved by promoting enhanced intermolecular interactions in the coating solution using a high molecular weight polymeric semiconductor and appropriate solvent system. This combination of balanced mobilities, conformal coating and metallic grid TCEs is a simple and generic approach to the fabrication of defect‐free large area organic solar cells (OSCs). The approach is demonstrated with 25 cm² monolithic devices possessing aperture‐corrected power conversion efficiencies of 5% and fill factors exceeding 0.5.     

Empowering Semi‐Transparent Solar Cells with Thermal‐Mirror Functionality

Device architectures for semi‐transparent perovskite solar cells are proposed that are not only highly efficient but also very effective in thermal‐mirror operation. With the optimal top transparent electrode design based on thin metal layer capped with a high‐index dielectric layer for selective transmittance in visible and high reflectance in near‐infrared (NIR) region, the proposed see‐through devices exhibit average power conversion efficiency as large as 13.3% and outstanding NIR rejection of 85.5%, demonstrating their great potential for ideal “energy‐generating and heat‐rejecting” solar windows that can make a smart use of solar energy.     

Fully Plastic Dye Solar Cell Devices by Low‐Temperature UV‐Irradiation of both the Mesoporous TiO2 Photo‐ and Platinized Counter‐Electrodes

The application of UV irradiation processes are successfully proposed for the first time in the fabrication of both of the two plastic electrodes in flexible dye solar cells (DSCs) and modules. For the realization of the photo‐electrode, a customized TiO₂ paste formulation and UV processing method was developed which yields 134% (48%) performance enhancement with respect to the same (binder‐free) paste treated at 120 °C. UV treatment induces both complete removal of organic media and more efficient charge collection. Significantly, highly catalytic platinized flexible counter‐electrodes are also obtained via UV photo‐induced reduction of screen‐printed platinum precursor pastes based on hexachloroplatinic acid. Using both UV‐processed electrodes, a fully plastic DSC is fabricated with a conversion efficiency of 4.3% under 1 Sun (semitransparent) and 5.3% under 0.2 Sun (opaque). Performance is within 10% of the efficiency of a glass‐based DSC prepared with the same materials but with conventional high temperature processes. The material formulations and processes are simple, and easily up‐scaled over large areas, even directly and simultaneously applicable to the preparation of both the photo‐and counter‐electrode on the same substrate which enabled us to demonstrate the first module on plastic realized with a W series interconnection.