Transition Metal Oxide Anodes for Electrochemical Energy Storage in Lithium‐ and Sodium‐Ion Batteries

Lithium‐ion batteries (LIBs) with outstanding energy and power density have been extensively investigated in recent years, rendering them the most suitable energy storage technology for application in emerging markets such as electric vehicles and stationary storage. More recently, sodium, one of the most abundant elements on earth, exhibiting similar physicochemical properties as lithium, has been gaining increasing attention for the development of sodium‐ion batteries (SIBs) in order to address the concern about Li availability and cost—especially with regard to stationary applications for which size and volume of the battery are of less importance. Compared with traditional intercalation reactions, conversion reaction‐based transition metal oxides (TMOs) are prospective anode materials for rechargeable batteries thanks to their low cost and high gravimetric specific capacities. In this review, the recent progress and remaining challenges of conversion reactions for LIBs and SIBs are discussed, covering an overview about the different synthesis methods, morphological characteristics, as well as their electrochemical performance. Potential future research directions and a perspective toward the practical application of TMOs for electrochemical energy storage are also provided.     

Introducing Highly Redox‐Active Atomic Centers into Insertion‐Type Electrodes for Lithium‐Ion Batteries

The development of alternative anode materials with higher volumetric and gravimetric capacity allowing for fast delithiation and, even more important, lithiation is crucial for next‐generation lithium‐ion batteries. Herein, the development of a completely new active material is reported, which follows an insertion‐type lithiation mechanism, metal‐doped CeO₂. Remarkably, the introduction of carefully selected dopants, herein exemplified for iron, results in an increase of the achievable capacity by more than 200%, originating from the reduction of the dopant to the metallic state and additional space for the lithium ion insertion due to a significant off‐centering of the dopant atoms in the crystal structure, away from the original Ce site. In addition to the outstanding performance of such materials in high‐power lithium‐ion full‐cells, the selective reduction of the iron dopant under preservation of the crystal structure of the host material is expected to open up a new field of research.     

Nanoarchitectured Array Electrodes for Rechargeable Lithium‐ and Sodium‐Ion Batteries

Rechargeable ion batteries have contributed immensely to shaping the modern world and been seriously considered for the efficient storage and utilization of intermittent renewable energies. To fulfill their potential in the future market, superior battery performance of high capacity, great rate capability, and long lifespan is undoubtedly required. In the past decade, along with discovering new electrode materials, the focus has been shifting more and more toward rational electrode designs because the performance is intimately connected to the electrode architectures, particularly their designs at the nanoscale that can alleviate the reliance on the materials' intrinsic nature. The utilization of nanoarchitectured arrays in the design of electrodes has been proven to significantly improve the battery performance. A comprehensive summary of the structural features and fabrications of the nanoarchitectured array electrodes is provided, and some of the latest achievements in the area of both lithium‐ and sodium‐ion batteries are highlighted. Finally, future challenges and opportunities that would allow further development of such advanced electrode configuration are discussed.     

Silicon‐Based Nanomaterials for Lithium‐Ion Batteries: A Review

There are growing concerns over the environmental, climate, and health impacts caused by using non‐renewable fossil fuels. The utilization of green energy, including solar and wind power, is believed to be one of the most promising alternatives to support more sustainable economic growth. In this regard, lithium‐ion batteries (LIBs) can play a critically important role. To further increase the energy and power densities of LIBs, silicon anodes have been intensively explored due to their high capacity, low operation potential, environmental friendliness, and high abundance. The main challenges for the practical implementation of silicon anodes, however, are the huge volume variation during lithiation and delithiation processes and the unstable solid‐electrolyte interphase (SEI) films. Recently, significant breakthroughs have been achieved utilizing advanced nanotechnologies in terms of increasing cycle life and enhancing charging rate performance due partially to the excellent mechanical properties of nanomaterials, high surface area, and fast lithium and electron transportation. Here, the most recent advance in the applications of 0D (nanoparticles), 1D (nanowires and nanotubes), and 2D (thin film) silicon nanomaterials in LIBs are summarized. The synthetic routes and electrochemical performance of these Si nanomaterials, and the underlying reaction mechanisms are systematically described.     

Strategies for Dendrite‐Free Anode in Aqueous Rechargeable Zinc Ion Batteries

Ongoing interest is focused on aqueous zinc ion batteries (ZIBs) for mass‐production energy storage systems as a result of their affordability, safety, and high energy density. Ensuring the stability of the electrode/electrolyte interface is of particular importance for prolonging the cycling ability to meet the practical requirements of rechargeable batteries. Zinc anodes exhibit poor cycle life and low coulombic efficiency, stemming from the severe dendrite growth, and irreversible byproducts such as H₂ and inactive ZnO. Great efforts have recently been devoted to zinc anode protection for designing high‐performance ZIBs. However, the intrinsic origins of zinc plating/striping are poorly understood, which greatly delay its potential applications. Rather than focusing on battery metrics, this review delves deeply into the underlying science that triggers the deposition/dissolution of zinc ions. Furthermore, recent advances in modulating the zinc coordination environment, uniforming interfacial electric fields, and inducing zinc deposition are highlighted and summarized. Finally, perspectives and suggestions are provided for designing highly stable zinc anodes for the industrialization of the aqueous rechargeable ZIBs in the near future.     

Graphene‐Containing Nanomaterials for Lithium‐Ion Batteries

Graphene‐containing nanomaterials have emerged as important candidates for electrode materials in lithium‐ion batteries (LIBs) due to their unique physical properties. In this review, a brief introduction to recent developments in graphene‐containing nanocomposite electrodes and their derivatives is provided. Subsequently, synthetic routes to nanoparticle/graphene composites and their electrochemical performance in LIBs are highlighted, and the current state‐of‐the‐art and most recent advances in the area of graphene‐containing nanocomposite electrode materials are summarized. The limitations of graphene‐containing materials for energy storage applications are also discussed, with an emphasis on anode and cathode materials. Potential research directions for the future development of graphene‐containing nanocomposites are also presented, with an emphasis placed on practicality and scale‐up considerations for taking such materials from benchtop curiosities to commercial products.     

Enhanced Ion Conductivity in Conducting Polymer Binder for High‐Performance Silicon Anodes in Advanced Lithium‐Ion Batteries

Polymer binders with high ion and electron conductivities are prepared by assembling ionic polymers (polyethylene oxide and polyethylenimine) onto the electrically conducting polymer poly(3,4‐ethylenedioxythiophene): poly(styrenesulfonate) chains. Crosslinking, chemical reductions, and electrostatics increase the modulus of the binders and maintain the integrity of the anode. The polymer binder shows lithium‐ion diffusivity and electron conductivity that are 14 and 90 times higher than those of the widely used carboxymethyl cellulose (with acetylene black) binder, respectively. The silicon anode with the polymer binder has a high reversible capacity of over 2000 mA h g^?1 after 500 cycles at a current density of 1.0 A g^?1 and maintains a superior capacity of 1500 mA h g^?1 at a high current density of 8.0 A g^?1.     

Two‐Dimensional Materials for Beyond‐Lithium‐Ion Batteries

Lithium‐ion batteries (LIBs) have dominated the portable electronics industry and solid‐state electrochemical research and development for the past two decades. In light of possible concerns over the cost and future availability of lithium, sodium‐ion batteries (SIBs) and other new technologies have emerged as candidates for large‐scale stationary energy storage. Research in these technologies has increased dramatically with a focus on the development of new materials for both the positive and negative electrodes that can enhance the cycling stability, rate capability, and energy density. Two‐dimensional (2D) materials are showing promise for many energy‐related applications and particularly for energy storage, because of the efficient ion transport between the layers and the large surface areas available for improved ion adsorption and faster surface redox reactions. Recent research highlights on the use of 2D materials in these future ‘beyond‐lithium‐ion’ battery systems are reviewed, and strategies to address challenges are discussed as well as their prospects.     

Vanadate‐Based Materials for Li‐Ion Batteries: The Search for Anodes for Practical Applications

While the practical application of electrode materials depends intensively on the Li⁺ ion storage mechanisms correlating ultimately with the coulombic efficiency, reversible capacity, and morphology variation of electrode material upon cycling, only intercalation‐type electrode materials have proven viable for commercialization up to now. This paper reviews the promising anode materials of metal vanadates (M_xV_yO_z, M = Co, Cu, Mn, Fe, Zn, Ni, Li) that have high capacity, low cost, and abundant resource, and also discusses the related Li⁺ ion storage mechanism. It is concluded that most of these (M_xV_yO_z, M = Co, Cu, Mn, Fe, Zn, Ni) exhibit irreversible redox reactions upon lithiation/delithiation accompanied by large volume expansion, which is not favorable for industrial applications. In particular, Li₃VO₄ with specific intercalation Li⁺ ion storage mechanism and compatible merits of safety and energy density exhibits great potential for practical application. This review systematically summarizes the latest progress in Li₃VO₄ research, including the representative fabrication approaches for advanced morphology and state‐of‐the‐art technologies to boost performance and the morphology variation associated with Li⁺ ion storage mechanisms. Furthermore, an outlook on where breakthroughs for Li₃VO₄ may be most likely achieved will be provided.     

Silicon Anode with High Initial Coulombic Efficiency by Modulated Trifunctional Binder for High‐Areal‐Capacity Lithium‐Ion Batteries

High‐capacity electrode materials play a vital role for high‐energy‐density lithium‐ion batteries. Silicon (Si) has been regarded as a promising anode material because of its outstanding theoretical capacity, but it suffers from an inherent volume expansion problem. Binders have demonstrated improvements in the electrochemical performance of Si anodes. Achieving ultrahigh‐areal‐capacity Si anodes with rational binder strategies remains a significant challenge. Herein, a binder‐lithiated strategy is proposed for ultrahigh‐areal‐capacity Si anodes. A hard/soft modulated trifunctional network binder (N‐P‐LiPN) is constructed by the partially lithiated hard polyacrylic acid as a framework and partially lithiated soft Nafion as a buffer via the hydrogen binding effect. N‐P‐LiPN has strong adhesion and mechanical properties to accommodate huge volume change of the Si anode. In addition, lithium‐ions are transferred via the lithiated groups of N‐P‐LiPN, which significantly enhances the ionic conductivity of the Si anode. Hence, the Si@N‐P‐LiPN electrodes achieve the highest initial Coulombic efficiency of 93.18% and a stable cycling performance for 500 cycles at 0.2 C. Specially, Si@N‐P‐LiPN electrodes demonstrate an ultrahigh‐areal‐capacity of 49.59 mAh cm^?2. This work offers a new approach for inspiring the battery community to explore novel binders for next‐generation high‐energy‐density storage devices.     

Porosity‐Controlled TiNb2O7 Microspheres with Partial Nitridation as A Practical Negative Electrode for High‐Power Lithium‐Ion Batteries

Titanium niobium oxide (TiNb₂O₇) has been recognized as a promising anode material for lithium‐ion batteries (LIBs) in view of its potential to operate at high rates with improved safety and high theoretical capacity of 387 mAh g^?1. However, it suffers from poor Li⁺ ion diffusivity and low electronic conductivity originated from its wide band gap energy (E_g > 2 eV). Here, porous TiNb₂O₇ microspheres (PTNO MSs) are prepared via a facile solvothermal reaction. PTNO MSs have a particle size of ≈1.2 μm and controllable pore sizes in the range of 5–35 nm. Ammonia gas nitridation treatment is conducted on PTNO MSs to introduce conducting Ti_1?xNb_xN layer on the surface and form nitridated PTNO (NPTNO) MSs. The porous structure and conducting Ti_1?xNb_xN layer enhance the transport kinetics associated with Li⁺ ions and electrons, which leads to significant improvement in electrochemical performance. As a result, the NPTNO electrode shows a high discharge capacity of ≈265 mAh g^?1, remarkable rate capability (≈143 mAh g^?1 at 100 C) and durable long‐term cyclability (≈91% capacity retention over 1000 cycles at 5 C). These results demonstrate the great potential of TiNb₂O₇ as a practical high‐rate anode material for LIBs.     

Iron‐Oxide‐Based Advanced Anode Materials for Lithium‐Ion Batteries

Iron oxides, such as Fe₂O₃ and Fe₃O₄, have recently received increased attention as very promising anode materials for rechargeable lithium‐ion batteries (LIBs) because of their high theoretical capacity, non‐toxicity, low cost, and improved safety. Nanostructure engineering has been demonstrated as an effective approach to improve the electrochemical performance of electrode materials. Here, recent research progress in the rational design and synthesis of diverse iron oxide‐based nanomaterials and their lithium storage performance for LIBs, including 1D nanowires/rods, 2D nanosheets/flakes, 3D porous/hierarchical architectures, various hollow structures, and hybrid nanostructures of iron oxides and carbon (including amorphous carbon, carbon nanotubes, and graphene). By focusing on synthesis strategies for various iron‐oxide‐based nanostructures and the impacts of nanostructuring on their electrochemical performance, novel approaches to the construction of iron‐oxide‐based nanostructures are highlighted and the importance of proper structural and compositional engineering that leads to improved physical/chemical properties of iron oxides for efficient electrochemical energy storage is stressed. Iron‐oxide‐based nanomaterials stand a good chance as negative electrodes for next generation LIBs.