Active MnOx Electrocatalysts Prepared by Atomic Layer Deposition for Oxygen Evolution and Oxygen Reduction Reactions

The ability to deposit conformal catalytic thin films enables opportunities to achieve complex nanostructured designs for catalysis. Atomic layer deposition (ALD) is capable of creating conformal thin films over complex substrates. Here, ALD‐MnO_x on glassy carbon is investigated as a catalyst for the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR), two reactions that are of growing interest due to their many applications in alternative energy technologies. The films are characterized by X‐ray photoelectron spectroscopy, X‐ray diffraction, scanning electron microscopy, ellipsometry, and cyclic voltammetry. The as‐deposited films consist of Mn(II)O, which is shown to be a poor catalyst for the ORR, but highly active for the OER. By controllably annealing the samples, Mn₂O₃ catalysts with good activity for both the ORR and OER are synthesized. Hypotheses are presented to explain the large difference in the activity between the MnO and Mn₂O₃ catalysts for the ORR, but similar activity for the OER, including the effects of surface oxidation under experimental conditions. These catalysts synthesized though ALD compare favorably to the best MnO_x catalysts in the literature, demonstrating a viable way to produce highly active, conformal thin films from earth‐abundant materials for the ORR and the OER.     

Highly Active Trimetallic NiFeCr Layered Double Hydroxide Electrocatalysts for Oxygen Evolution Reaction

The development of efficient and robust earth‐abundant electrocatalysts for the oxygen evolution reaction (OER) is an ongoing challenge. Here, a novel and stable trimetallic NiFeCr layered double hydroxide (LDH) electrocatalyst for improving OER kinetics is rationally designed and synthesized. Electrochemical testing of a series of trimetallic NiFeCr LDH materials at similar catalyst loading and electrochemical surface area shows that the molar ratio Ni:Fe:Cr = 6:2:1 exhibits the best intrinsic OER catalytic activity compared to other NiFeCr LDH compositions. Furthermore, these nanostructures are directly grown on conductive carbon paper for a high surface area 3D electrode that can achieve a catalytic current density of 25 mA cm^?2 at an overpotential as low as 225 mV and a small Tafel slope of 69 mV dec^?1 in alkaline electrolyte. The optimized NiFeCr catalyst is stable under OER conditions and X‐ray photoelectron spectroscopy, electron paramagnetic resonance spectroscopy, and elemental analysis confirm the stability of trimetallic NiFeCr LDH after electrochemical testing. Due to the synergistic interactions among the metal centers, trimetallic NiFeCr LDH is significantly more active than NiFe LDH and among the most active OER catalysts to date. This work also presents general strategies to design more efficient metal oxide/hydroxide OER electrocatalysts.     

Enhanced Stability and Thickness‐Independent Oxygen Evolution Electrocatalysis of Heterostructured Anodes with Buried Epitaxial Bilayers

Achieving high oxygen evolution reaction (OER) activity while maintaining performance stability is a key challenge for designing perovskite structure oxide OER catalysts, which are often unstable in alkaline environments transforming into an amorphous phase. While the chemical and structural transformation occurring during electrolysis at the electrolyte–catalyst interface is now regarded as a crucial factor influencing OER activity, here, using La_0.7Sr_0.3CoO_3?δ (LSCO) as an active OER catalyst, the critical influence of buried layers on the oxidation current stability in nanoscopically thin, chemically and structurally evolving, catalyst layers is revealed. The use of epitaxial thin films is demonstrated to engineer both depletion layer widths and chemical stability of the catalyst support structure resulting in heterostructured anodes that maintain facile transport kinetics across the electrolyte–anode interface for atomically thin (2–3 unit cells) LSCO catalyst layers and greatly enhanced oxidation current stability as the perovskite structure OER catalysts chemically and structurally transform. This work opens up an approach to design robust and active heterostructured anodes with dynamically evolving ultrathin OER electrocatalyst layers for future green fuel technologies such as conformal coatings of high‐density 3D anode topologies for water splitting.     

Precursor Decomposition,Microstructure, and Porosity of Yttria Stabilized Zirconia Thin Films Prepared by Aerosol‐Assisted Chemical Vapor Deposition

Microstructures of yttria stabilized zirconia thin films deposited by aerosol assisted chemical vapor deposition (AA‐CVD) are correlated with the thermal decomposition behavior of the corresponding metal precursors, zirconium and yttrium 2,4‐pentanedionate. Process conditions of AA‐CVD are investigated with the aim of producing dense and compact YSZ thin films for applications as gas‐tight electrolyte. Based on systematic cross sectional scanning transmission electron microscopy (STEM) investigations and conductivity measurements, the development of percolating nanoporosity is observed in samples prepared at temperatures between 350 °C and 600 °C at standard solution throughput. Compact columnar thin films with bulk conductivity are obtained at 600 °C by reducing the metal content of the precursor solution and at 450 °C by reducing the solution throughput.     

Monolithic Photoassisted Water Splitting Device Using Anodized Ni‐Fe Oxygen Evolution Catalytic Substrate

Large‐scale industrial application of solar‐driven water splitting has called for the development of oxygen evolution reaction (OER) catalysts that deliver high catalytic activity and stability. Here it is shown that an efficient OER catalytic substrate can be developed by roll‐to‐roll fabrication of electrodeposited Ni‐Fe foils, followed by anodization. An amorphous oxyhydroxide layer directly formed on Ni‐Fe foils exhibits high catalytic activity toward water oxidation in 1 m KOH solution, which requires an overpotential of 0.251 V to reach current density of 10 mA cm^–2. The developed catalytic electrode shows the best OER activity among catalysts with film structure. The catalyst also shows prolonged stability at vigorous gas evolution condition for 36 h. To demonstrate the monolithic photoassisted water splitting device, an amorphous silicon solar cell is fabricated on Ni‐Fe catalytic substrate, resulting in lowering OER overpotential under light illumination. This monolithic device is the first demonstration that the OER catalytic substrates and the solar cells are integrated and can be easily applied for industrial scale solar‐driven water electrolysis.     

Tin Oxide as a Protective Heterojunction with Silicon for Efficient Photoelectrochemical Water Oxidation in Strongly Acidic or Alkaline Electrolytes

Photoelectrodes without a p–n junction are often limited in efficiency by charge recombination at semiconductor surfaces and slow charge transfer to electrocatalysts. This study reports that tin oxide (SnO_x) layers applied to n‐Si wafers after forming a thin chemically oxidized SiO_x layer can passivate the Si surface while producing ≈620 mV photovoltage under 100 mW cm^?2 of simulated sunlight. The SnO_x layer makes ohmic contacts to Ni, Ir, or Pt films that act as precatalysts for the oxygen‐evolution reaction (OER) in 1.0 m KOH(aq) or 1.0 m H₂SO₄(aq). Ideal regenerative solar‐to‐O₂(g) efficiencies of 4.1% and 3.7%, respectively, are obtained in 1.0 m KOH(aq) with Ni or in 1.0 m H₂SO₄(aq) with Pt/IrO_x layers as OER catalysts. Stable photocurrents for >100 h are obtained for electrodes with patterned catalyst layers in both 1.0 m KOH(aq) and 1.0 m H₂SO₄(aq).     

NiFe‐Based Metal–Organic Framework Nanosheets Directly Supported on Nickel Foam Acting as Robust Electrodes for Electrochemical Oxygen Evolution Reaction

It is of great significance to develop highly efficient and superior stable oxygen evolution reaction (OER) electrocatalysts for upcoming electrochemical conversion technologies and clean energy systems. Here, an assembled 3D electrode is synthesized by a one‐step solvothermal process using such an original OER electrocatalyst. During the solvothermal process, Ni ions released from Ni foam in acidic solution and Fe ions added exogenously act as metal centers and coordinate with terephthalic acid (TPA) organic molecules by robust coordinate bonds, and finally, NiFe‐based metal–organic framework (MOF) nanosheets in situ grown on Ni foam, i.e., MIL‐53(FeNi)/NF, are prepared. This binder‐free 3D electrode shows superior OER activity with high current density (50 mA cm^?2) at an overpotential of 233 mV, a Tafel slope of 31.3 mV dec^?1, and excellent stability in alkaline aqueous solution (1 m KOH). It is discovered that introduction of Fe into MIL‐53 structure increases electrochemically‐active areas as well as reaction sites, accelerated electron transport capability, and modulated electronic structure to enhance catalytic performance. Besides, first principles calculations show that MIL‐53(FeNi) is more favorable for foreign atoms' adsorption and has increased 3d orbital electron density boosting intrinsic activity. This work elucidates a promising electrode for electrocatalysts and enriches direct application of MOF materials.     

Graphitic Nanoshell/Mesoporous Carbon Nanohybrids as Highly Efficient and Stable Bifunctional Oxygen Electrocatalysts for Rechargeable Aqueous Na–Air Batteries

Efficient and cost‐effective bifunctional electrocatalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are of vital importance in energy conversion and storage devices. Despite the recent progress in bifunctional oxygen electrocatalysts, their unbalanced and insufficient OER and ORR activities has continued to pose challenges for the practical application of such energy devices. The design of highly integrated, high‐performance, bifunctional oxygen electrocatalysts composed of highly graphitic nanoshells embedded in mesoporous carbon (GNS/MC) is reported. The GNS/MC exhibits very high oxygen electrode activity, which is one of the best performances among nonprecious metal bifunctional oxygen electrocatalysts, and substantially outperforms Ir‐ and Pt‐based catalysts. Moreover, the GNS/MC shows excellent durability for both OER and ORR. In situ X‐ray absorption spectroscopy and square wave voltammetry reveal the roles of residual Ni and Fe entities in enhancing OER and ORR activities. Raman spectra indicate highly graphitic, defect‐rich nature of the GNS/MC, which can contribute to the enhanced OER activity and to high stability for the OER and ORR. In aqueous Na–air battery tests, the GNS/MC air cathode‐based cell exhibits superior performance to Ir/C‐ and Pt/C‐based batteries. Significantly, the GNS/MC‐based cell demonstrates the first example of rechargeable aqueous Na–air battery.     

FeN4 Sites Embedded into Carbon Nanofiber Integrated with Electrochemically Exfoliated Graphene for Oxygen Evolution in Acidic Medium

Development of inexpensive and efficient oxygen evolution reaction (OER) catalysts in acidic environment is very challenging, but it is important for practical proton exchange membrane water electrolyzers. A molecular iron–nitrogen coordinated carbon nanofiber is developed, which is supported on an electrochemically exfoliated graphene (FeN₄/NF/EG) electrocatalyst through carbonizing the precursor composed of iron ions absorbed on polyaniline‐electrodeposited EG. Benefitting from the unique 3D structure, the FeN₄/NF/EG hybrid exhibits a low overpotential of ≈294 mV at 10 mA cm^?2 for the OER in acidic electrolyte, which is much lower than that of commercial Ir/C catalysts (320 mV) as well as all previously reported acid transitional metal‐derived OER electrocatalysts. X‐ray absorption spectroscopy coupled with a designed poisoning experiment reveals that the molecular Fe?N₄ species are identified as active centers for the OER in acid. The first‐principles‐based calculations verify that the Fe?N₄–doped carbon structure is capable of reducing the potential barriers and boosting the electrocatalytic OER activity in acid.     

Fe?N4 Sites Embedded into Carbon Nanofiber Integrated with Electrochemically Exfoliated Graphene for Oxygen Evolution in Acidic Medium

Development of inexpensive and efficient oxygen evolution reaction (OER) catalysts in acidic environment is very challenging, but it is important for practical proton exchange membrane water electrolyzers. A molecular iron–nitrogen coordinated carbon nanofiber is developed, which is supported on an electrochemically exfoliated graphene (FeN₄/NF/EG) electrocatalyst through carbonizing the precursor composed of iron ions absorbed on polyaniline‐electrodeposited EG. Benefitting from the unique 3D structure, the FeN₄/NF/EG hybrid exhibits a low overpotential of ≈294 mV at 10 mA cm^?2 for the OER in acidic electrolyte, which is much lower than that of commercial Ir/C catalysts (320 mV) as well as all previously reported acid transitional metal‐derived OER electrocatalysts. X‐ray absorption spectroscopy coupled with a designed poisoning experiment reveals that the molecular Fe? N₄ species are identified as active centers for the OER in acid. The first‐principles‐based calculations verify that the Fe? N₄–doped carbon structure is capable of reducing the potential barriers and boosting the electrocatalytic OER activity in acid.     

Ni‐Metalloid (B,Si, P,As, and Te) Alloys as Water Oxidation Electrocatalysts

Breakthroughs toward effective water‐splitting electrocatalysts for mass hydrogen production will necessitate material design strategies based on unexplored material chemistries. Herein, Ni‐metalloid (B, Si, P, As, Te) alloys are reported as an emergent class of highly promising electrocatalysts for the oxygen evolution reaction (OER) and insight is offered into the origin of activity enhancement on the premise of the surface electronic structure, the OER activation energy, influence of the guest metalloid elements on the lattice structure of the host metal (Ni), and surface‐oxidized metalloid oxoanions. The metalloids modify the lattice structure of Ni, causing changes in the nearest Ni–Ni interatomic distance (d_Ni–Ni). The activation energy E_a scales with d_Ni–Ni indicating an apparent dependence of the OER activity on lattice properties. During the OER, surface Ni atoms are oxidized to nickel oxyhydroxide, which is the active state of the catalyst, meanwhile, the surface metalloids are oxidized to the corresponding oxoanions that affect the interfacial electrode/electrolyte properties and hence the adsorption/desorption interaction energies of the reacting species.     

Nitrogen and Sulfur Codoped Graphite Foam as a Self‐Supported Metal‐Free Electrocatalytic Electrode for Water Oxidation

The oxidation of water to produce oxygen gas is related to a variety of energy storage systems. Thus, the development of efficient, cheap, durable, and scalable electrocatalysts for oxygen evolution reaction (OER) is of great importance. Here, a high‐performance OER catalyst, nitrogen and sulfur codoped graphite foam (NSGF) is reported. This NSGF is prepared from commercial graphite foil and directly applied as an electrocatalytic electrode without using a current collector and a polymeric binder. It exhibits an extremely low overpotential of 0.380 V to reach a current density of 10 mA cm^?2 and shows fast kinetics with a small Tafel slope of 96 mV dec^?1 in 0.1 m KOH. This electrocatalytic performance is superior or comparable to those of previously reported metal‐free OER catalysts.     

Single Atoms and Clusters Based Nanomaterials for Hydrogen Evolution,Oxygen Evolution Reactions,and Full Water Splitting

The sustainable and scalable production of hydrogen through hydrogen evolution reaction (HER) and oxygen through oxygen evolution reaction (OER) in water splitting demands efficient and robust electrocatalysts. Currently, state‐of‐the‐art electrocatalysts of Pt and IrO₂/RuO₂ exhibit the benchmark catalytic activity toward HER and OER, respectively. However, expanding their practical application is hindered by their exorbitant price and scarcity. Therefore, the development of alternative effective electrocatalysts for water splitting is crucial. In the last few decades, substantial effort has been devoted to the development of alternative HER/OER and water splitting catalysts based on various transition metals (including Fe, Co, Ni, Mo, and atomic Pt) which show promising catalytic activities and durability. In this review, after a brief introduction and basic mechanism of HER/OER, the authors systematically discuss the recent progress in design, synthesis, and application of single atom and cluster‐based HER/OER and water splitting catalysts. Moreover, the crucial factors that can tune the activity of catalysts toward HER/OER and water splitting such as morphology, crystal defects, hybridization of metals with nonmetals, heteroatom doping, alloying, and formation of metals inside graphitic layered materials are discussed. Finally, the existing challenges and future perspectives for improving the performance of electrocatalysts for water splitting are addressed.     

A Fully Reversible Water Electrolyzer Cell Made Up from FeCoNi (Oxy)hydroxide Atomic Layers

Renewable electricity powered water electrolysis is a promising solution for the conversion and storage of the intermittent renewable energy resources in the form of hydrogen. Herein, atomically thin FeCoNi ternary (oxy)hydroxide nanosheets (FeCoNi‐ATNs) are developed as efficient and robust bifunctional electrocatalysts for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in 1 m KOH solution (pH = 14). The electrocatalyst shows remarkably high apparent catalytic performance (400 mA cm^?2 at 350 mV for OER and 240 mV for HER) and mass activities at modest overpotentials (1931 A g^?1 at 330 mV for OER; 1819 A g^?1 at 200 mV for HER). Moreover, the OER and HER performance of FeCoNi–ATNs are fully reversible and electrochemically switchable, due to the interconversion attribute of two catalytic states for OER and HER. Using the dual functional properties of this catalyst, a fully reversible water electrolyzer cell is fabricated, exhibiting a robust reversibility between two half reactions in water electrolysis under a high current density (100 mA cm^?1), which can effectively overcome the stability issues caused by electrode depolarization during frequent power interruptions, an inevitable phenomenon commonly brought about by the usage of intermittent renewable energy supplies.     

Ultralow Ru Loading Transition Metal Phosphides as High‐Efficient Bifunctional Electrocatalyst for a Solar‐to‐Hydrogen Generation System

Water splitting is a promising technology for sustainable conversion of hydrogen energy. The rational design of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) bifunctional electrocatalysts with superior activity and stability in the same electrolyte is the key to promoting their large‐scale applications. Herein, an ultralow Ru (1.08 wt%) transition metal phosphide on nickel foam (Ru–MnFeP/NF) derived from Prussian blue analogue, that effectively drivies both the OER and the HER in 1 m KOH, is reported. To reach 20 mA cm^?2 for OER and 10 mA cm^?2 for HER, the Ru–MnFeP/NF electrode only requires overpotentials of 191 and 35 mV, respectively. Such high electrocatalytic activity exceeds most transition metal phosphides for the OER and the HER, and even reaches Pt‐like HER electrocatalytic levels. Accordingly, it significantly accelerates full water splitting at 10 mA cm^?2 with 1.470 V, which outperforms that of the integrated RuO₂ and Pt/C couple electrode (1.560 V). In addition, the extremely long operational stability (50 h) and the successful demonstration of a solar‐to‐hydrogen generation system through full water splitting provide more flexibility for large‐scale applications of Ru–MnFeP/NF catalysts.     

NiCoFe‐Layered Double Hydroxides/N‐Doped Graphene Oxide Array Colloid Composite as an Efficient Bifunctional Catalyst for Oxygen Electrocatalytic Reactions

Ternary NiCoFe‐layered double hydroxide (NiCo^IIIFe‐LDH) with Co³⁺ is grafted on nitrogen‐doped graphene oxide (N‐GO) by an in situ growth route. The array‐like colloid composite of NiCo^IIIFe‐LDH/N‐GO is used as a bifunctional catalyst for both oxygen evolution/reduction reactions (OER/ORR). The NiCo^IIIFe‐LDH/N‐GO array has a 3D open structure with less stacking of LDHs and an enlarged specific surface area. The hierarchical structure design and novel material chemistry endow high activity propelling O₂ redox. By exposing more amounts of Ni and Fe active sites, the NiCo^IIIFe‐LDH/N‐GO illustrates a relatively low onset potential (1.41 V vs reversible hydrogen electrode) in 0.1 mol L^?1 KOH solution under the OER process. Furthermore, by introducing high valence Co³⁺, the onset potential of this material in ORR is 0.88 V. The overvoltage difference is 0.769 V between OER and ORR. The key factors for the excellent bifunctional catalytic performance are believed to be the Co with a high valence, the N‐doping of graphene materials, and the highly exposed Ni and Fe active sites in the array‐like colloid composite. This work further demonstrates the possibility to exploit the application potential of LDHs as OER and ORR bifunctional electrochemical catalysts.     

Multifunctional Single‐Crystallized Carbonate Hydroxides as Highly Efficient Electrocatalyst for Full Water splitting

The controllable synthesis of single‐crystallized iron‐cobalt carbonate hydroxide nanosheets array on 3D conductive Ni foam (FCCH/NF) as a monolithic oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) bifunctional electrocatalyst for full water splitting is described. The results demonstrate that the incorporation of Fe can effectively tune the morphology, composition, electronic structure, and electrochemical active surface area of the electrocatalysts, thus greatly enhancing the intrinsic electrocatalytic activity. The optimal electrocatalyst (F_0.25C₁CH/NF) can deliver 10 and 1000 mA cm^?2 at very small overpotentials of 77 and 256 mV for HER and 228 and 308 mV for OER in 1.0 m KOH without significant interference from gas evolution. The F_0.25C₁CH‐based two‐electrode alkaline water electrolyzer only requires cell voltages of 1.45 and 1.52 V to achieve current densities of 10 and 500 mA cm^?2. The results demonstrate that such fascinating electrocatalytic activity can be ascribed to the increase in the catalytic active surface area, facilitated electron and mass transport properties, and the synergistic interactions because of the incorporation of Fe.     

Atomic Layer Deposition of Functional Layers for on Chip 3D Li‐Ion All Solid State Microbattery

Nowadays, millimeter scale power sources are key devices for providing autonomy to smart, connected, and miniaturized sensors. However, until now, planar solid state microbatteries do not yet exhibit a sufficient surface energy density. In that context, architectured 3D microbatteries appear therefore to be a good solution to improve the material mass loading while keeping small the footprint area. Beside the design itself of the 3D microbaterry, one important technological barrier to address is the conformal deposition of thin films (lithiated or not) on 3D structures. For that purpose, atomic layer deposition (ALD) technology is a powerful technique that enables conformal coatings of thin film on complex substrate. An original, robust, and highly efficient 3D scaffold is proposed to significantly improve the geometrical surface of miniaturized 3D microbattery. Four functional layers composing the 3D lithium ion microbattery stacking has been successfully deposited on simple and double microtubes 3D templates. In depth synchrotron X‐ray nanotomography and high angle annular dark field transmission electron microscope analyses are used to study the interface between each layer. For the first time, using ALD, anatase TiO₂ negative electrode is coated on 3D tubes with Li₃PO₄ lithium phosphate as electrolyte, opening the way to all solid‐state 3D microbatteries. The surface capacity is significantly increased by the proposed topology (high area enlargement factor – “thick” 3D layer), from 3.5 μA h cm^?2 for a planar layer up to 0.37 mA h cm^?2 for a 3D thin film (105 times higher).     

Two‐Step Activated Carbon Cloth with Oxygen‐Rich Functional Groups as a High‐Performance Additive‐Free Air Electrode for Flexible Zinc–Air Batteries

A flexible air electrode (FAE) with both high oxygen electrocatalytic activity and excellent flexibility is the key to the performance of various flexible devices, such as Zn–air batteries. A facile two‐step method, mild acid oxidation followed by air calcination that directly activates commercial carbon cloth (CC) to generate uniform nanoporous and super hydrophilic surface structures with optimized oxygen‐rich functional groups and an enhanced surface area, is presented here. Impressively, this two‐step activated CC (CC‐AC) exhibits superior oxygen electrocatalytic activity and durability, outperforming the oxygen‐doped carbon materials reported to date. Especially, CC‐AC delivers an oxygen evolution reaction (OER) overpotential of 360 mV at 10 mA cm^?2 in 1 m KOH, which is among the best performances of metal‐free OER electrocatalysts. The practical application of CC‐AC is presented via its use as an FAE in a flexible rechargeable Zn–air battery. The bendable battery achieves a high open circuit voltage of 1.37 V, a remarkable peak power density of 52.3 mW cm^?3 at 77.5 mA cm^?3, good cycling performance with a small charge–discharge voltage gap of 0.98 V and high flexibility. This study provides a new approach to the design and construction of high‐performance self‐supported metal‐free electrodes.     

Electrocatalytic Oxygen Evolution Reaction in Acidic Environments – Reaction Mechanisms and Catalysts

The low efficiency of the electrocatalytic oxidation of water to O₂ (oxygen evolution reaction‐OER) is considered as one of the major roadblocks for the storage of electricity from renewable sources in form of molecular fuels like H₂ or hydrocarbons. Especially in acidic environments, compatible with the powerful proton exchange membrane (PEM), an earth‐abundant OER catalyst that combines high activity and high stability is still unknown. Current PEM‐compatible OER catalysts still rely mostly on Ir and/or Ru as active components, which are both very scarce elements of the platinum group. Hence, the Ir and/or Ru amount in OER catalysts has to be strictly minimized. Unfortunately, the OER mechanism, which is the most powerful tool for OER catalyst optimization, still remains unclear. In this review, we first summarize the current state of our understanding of the OER mechanism on PEM‐compatible heterogeneous electrocatalysts, before we compare and contrast that to the OER mechanism on homogenous catalysts. Thereafter, an overview over monometallic OER catalysts is provided to obtain insights into structure‐function relations followed by a review of current material optimization concepts and support materials. Moreover, missing links required to complete the mechanistic picture as well as the most promising material optimization concepts are pointed out.