Incorporating CsF into the PbI2 Film for Stable Mixed Cation‐Halide Perovskite Solar Cells

Adding a small amount of CsI into mixed cation‐halide perovskite film via a one‐step method has been demonstrated as an excellent strategy for high‐performance perovskite solar cells (PSCs). However, the one‐step method generally relies on an antisolvent washing process, which is hard to control and not suitable for fabricating large‐area devices. Here, CsF is employed and Cs is incorporated into perovskite film via a two‐step method. It is revealed that CsF can effectively diffuse into the PbI₂ seed film, and drastically enhances perovskite crystallization, leading to high‐quality Cs‐doped perovskite film with a very long photoluminescence carrier lifetime (1413 ns), remarkable light stability, thermal stability, and humidity stability. The fabricated PSCs show power conversion efficiency (PCE) of over 21%, and they are highly thermally stable: in the aging test at 60 °C for 300 h, 96% of the original PCE remains. The CsF incorporation process provides a new avenue for stable high‐performance PSCs.     

Carrier Interfacial Engineering by Bismuth Modification for Efficient and Thermoresistant Perovskite Solar Cells

Organic–inorganic halide perovskite solar cells (PSCs) have emerged as attractive alternatives to conventional solar cells. It is still a challenge to obtain PSCs with good thermal stability and high permanence, especially at extreme outdoor temperatures. This work systematically studies the effects of Bi³⁺ modification on structural, electrical, and optical properties of perovskite films (FA_0.83MA_0.17Pb(I_0.83Br_0.17)₃) and the performance of corresponding PSCs. The results indicate that Bi³⁺ modified PSCs can achieve better thermal stability, photovoltaic response, and reproducibility compared with control cells due to the decreased grain boundaries, enhanced crystallization, and improved electron extraction from perovskite film. As a result, the modified PSC exhibits an optimized power conversion efficiency (PCE) of 19.4% compared with 18.3% for the optimized control device, accompanied by better thermoresistant ability under 100–180 °C and enhanced long‐term stability. The degradation rate of the modified device is reduced by an order of magnitude due to effective structural defect modification in perovskite photoactive layer. It could maintain more than two months at 60 °C. These results shed light on the origin of crystallization and thermal stability of perovskite films, and provide an approach to solve thermal stability issue of PSCs.     

Interfacial Effects of Tin Oxide Atomic Layer Deposition in Metal Halide Perovskite Photovoltaics

Metal halide perovskites offer a wide and tunable bandgap, making them promising candidates for top‐cell absorbers in tandem photovoltaics. In this work, the authors aim to understand the atomic layer deposition (ALD) precursor–perovskite interactions of the tin oxide ALD system and the role of organic fullerenes at the perovskite–tin oxide interface while establishing a framework for developing alternative perovskite‐compatible ALD processes in the future. It is shown, in the case of tin oxide ALD growth with tetrakis(dimethylamino)tin(IV) and water on FA_0.83Cs_0.17Pb(I_0.83Br_0.17)₃ perovskite, that perovskite stability is most sensitive to metal–organic exposure at elevated temperatures with an onset near 110 °C, resulting in removal of the formamidinium cation. Transitioning from ALD to pulsed‐chemical vapor deposition tin oxide growth can minimize the degradation effects. Investigation of fullerenes at the perovskite interface shows that thin fullerene layers offer minor improvements to perovskite stability under ALD conditions, but significant enhancement in carrier extraction. Fullerene materials are undesirable due to fabrication cost and poor mechanical stability. Compositional tuning of the perovskite material can improve the fullerene‐free device performance. This method is demonstrated with a bromine‐rich perovskite phase to enable an 8.2% efficient perovskite device with all‐inorganic extraction layers.     

Life history parameters of the cattle long‐nosed sucking louse,Linognathus vituli

Cattle sucking lice, Linognathus vituli (L.) (Phthiraptera: Linognathidae), were obtained from naturally infected cattle and maintained within ‘arenas’ affixed to the backs of cattle confined in controlled environment chambers maintained at a constant temperature of 15 °C. Temperatures measured within the arenas at an ambient temperature of 15 °C were constant at about 34 °C and only slightly above the temperature on nearby skin. The effect of temperature on egg development was determined using a gradient of temperatures between 25 °C and 41 °C. Eggs did not develop at temperatures of < 26 °C or > 39 °C. Survival of eggs was highest at temperatures of 30 °C and 35 °C. The earliest hatch was observed at 5 days post‐oviposition (at 33–35 °C). Development was extended to as long as 13 days at the lower temperatures. Kaplan–Meier survival probabilities were compared for lice kept at two densities in the arenas and showed there to be no effect of density on louse survival. Similarly, the mean number of eggs/louse/day over an 8‐day period was not influenced by louse density.     

High‐Performance Perovskite Solar Cells with Excellent Humidity and Thermo‐Stability via Fluorinated Perylenediimide

The notoriously poor stability of perovskite solar cells is a crucial issue restricting commercial applications. Here, a fluorinated perylenediimide (F‐PDI) is first introduced into perovskite film to enhance the device's photovoltaic performance, as well as thermal and moisture stability simultaneously. The conductive F‐PDI molecules filling at grain boundaries (GBs) and surface of perovskite film can passivate defects and promote charge transport through GBs due to the chelation between carbonyl of F‐PDI and noncoordinating lead. Furthermore, an effective multiple hydrophobic structure is formed to protect perovskite film from moisture erosion. As a result, the F‐PDI‐incorporated devices based on MAPbI₃ and Cs_0.05 (FA_0.83MA_0.17)_0.95 Pb (Br_0.17I_0.83)₃ absorber achieve champion efficiencies of 18.28% and 19.26%, respectively. Over 80% of the initial efficiency is maintained after exposure in air for 30 days with a relative humidity (RH) of 50%. In addition, the strong hydrogen bonding of F···H‐N can immobilize methylamine ion (MA⁺) and thus enhances the thermal stability of device, remaining nearly 70% of the initial value after thermal treatment (100 °C) for 24 h at 50% RH condition.     

Simultaneous Improvement in Efficiency and Stability of Low‐Temperature‐Processed Perovskite Solar Cells by Interfacial Control

In most current state‐of‐the‐art perovskite solar cells (PSCs), high‐temperature (≈500 °C)‐sintered metal oxides are employed as electron‐transporting layers (ETLs). To lower the device processing temperature, the development of low‐temperature‐processable ETL materials (such as solution‐processed ZnO) has received growing attention. However, thus far, the use of solution‐processed ZnO is limited because the reverse decomposition reaction that occurs at ZnO/perovskite interfaces significantly degrades the charge collection and stability of PSCs. In this work, the reverse decomposition reaction is successfully retarded by sulfur passivation of solution‐processed ZnO. The sulfur passivation of ZnO by a simple chemical means, efficiently reduces the oxygen‐deficient defects and surface oxygen‐containing groups, thus effectively preventing reverse decomposition reactions during and after formation of the perovskite active layers. Using the low‐temperature‐processed sulfur‐passivated ZnO (ZnO–S), perovskite layers with higher crystallinity and larger grain size are obtained, while the charge extraction at the ZnO/perovskite interface is significantly improved. As a result, the ZnO–S‐based PSCs achieve substantially improved power‐conversion‐efficiency (PCE) (19.65%) and long‐term air‐storage stability (90% retention after 40 d) compared with pristine ZnO‐based PSCs (16.51% and 1% retention after 40 d). Notably, the PCE achieved is the highest recorded (19.65%) for low‐temperature ZnO‐based PSCs.     

Efficient Passivation with Lead Pyridine‐2‐Carboxylic for High‐Performance and Stable Perovskite Solar Cells

Stability has become the main obstacle for the commercialization of perovskite solar cells (PSCs) despite the impressive power conversion efficiency (PCE). Poor crystallization and ion migration of perovskite are the major origins of its degradation under working condition. Here, high‐performance PSCs incorporated with pyridine‐2‐carboxylic lead salt (PbPyA₂) are fabricated. The pyridine and carboxyl groups on PbPyA₂ can not only control crystallization but also passivate grain boundaries (GBs), which result in the high‐quality perovskite film with larger grains and fewer defects. In addition, the strong interaction among the hydrophobic PbPyA₂ molecules and perovskite GBs acts as barriers to ion migration and component volatilization when exposed to external stresses. Consequently, superior optoelectronic perovskite films with improved thermal and moisture stability are obtained. The resulting device shows a champion efficiency of 19.96% with negligible hysteresis. Furthermore, thermal (90 °C) and moisture (RH 40–60%) stability are improved threefold, maintaining 80% of initial efficiency after aging for 480 h. More importantly, the doped device exhibits extraordinary improvement of operational stability and remains 93% of initial efficiency under maximum power point (MPP) tracking for 540 h.     

Proteomics of life at low temperatures: trigger factor is the primary chaperone in the Antarctic bacterium Pseudoalteromonas haloplanktis TAC125

The proteomes expressed at 4°C and 18°C by the psychrophilic Antarctic bacterium Pseudoalteromonas haloplanktis have been compared using two‐dimensional differential in‐gel electrophoresis, showing that translation, protein folding, membrane integrity and anti‐oxidant activities are upregulated at 4°C. This proteomic analysis revealed that the trigger factor is the main upregulated protein at low temperature. The trigger factor is the first molecular chaperone interacting with virtually all newly synthesized polypeptides on the ribosome and also possesses a peptidyl‐prolyl cis‐trans isomerase activity. This suggests that protein folding at low temperatures is a rate‐limiting step for bacterial growth in cold environments. It is proposed that the psychrophilic trigger factor rescues the chaperone function as both DnaK and GroEL (the major bacterial chaperones but also heat‐shock proteins) are downregulated at 4°C. The recombinant psychrophilic trigger factor is a monomer that displays unusually low conformational stability with a Tm value of 33°C, suggesting that the essential chaperone function requires considerable flexibility and dynamics to compensate for the reduction of molecular motions at freezing temperatures. Its chaperone activity is strongly temperature‐dependent and requires near‐zero temperature to stably bind a model‐unfolded polypeptide.     

Fast and Stable Proton Conduction in Heavily Scandium‐Doped Polycrystalline Barium Zirconate at Intermediate Temperatures

The environmental benefits of fuel cells and electrolyzers have become increasingly recognized in recent years. Fuel cells and electrolyzers that can operate at intermediate temperatures (300–450 °C) require, in principle, neither the precious metal catalysts that are typically used in polymer‐electrolyte‐membrane systems nor the costly heat‐resistant alloys used in balance‐of‐plant components of high‐temperature solid oxide electrochemical cells. These devices require an electrolyte with high ionic conductivity, typically more than 0.01 S cm^?1, and high chemical stability. To date, however, high ionic conductivities have been found in chemically unstable materials such as CsH₂PO₄, In‐doped SnP₂O₇, BaH₂, and LaH_3?2xO_x. Here, fast and stable proton conduction in 60‐at% Sc‐doped barium zirconate polycrystal, with a total conductivity of 0.01 S cm^?1 at 396 °C for 200 h is demonstrated. Heavy doping of Sc in barium zirconate simultaneously enhances the proton concentration, bulk proton diffusivity, specific grain boundary conductivity, and grain growth. An accelerated stability test under a highly concentrated and humidified CO₂ stream using in situ X‐ray diffraction shows that the perovskite phase is stable over 240 h at 400 °C under 0.98 atm of CO₂. These results show great promises as an electrolyte in solid‐state electrochemical devices operated at intermediate temperatures.     

Development and stability of a heat‐stable formulation of carbetocin for the prevention of postpartum haemorrhage for use in low and middle‐income countries

Postpartum haemorrhage is a leading cause of maternal death worldwide. Oxytocin, currently the drug of choice for prevention of PPH, requires constant refrigeration. In pursuit of an alternative medicine, Ferring Pharmaceuticals have developed a heat‐stable formulation of carbetocin, an oxytocin analogue. This study aimed to define that formulation, and to investigate its stability under ICH climate zone IV conditions (30°C/75% relative humidity) for at least 3 years and at extreme temperatures, such as 60°C, for shorter periods of time. The development resulted in a heat‐stable carbetocin formulation consisting of 0.1 mg/mL carbetocin in sodium succinate buffer, mannitol, and methionine. The optimum pH was determined to be pH 5.45 (5.25–5.65). The generated stability data of this formulation show that ≥95% purity of the peptide was maintained for a minimum of 3 years at 30°C, 6 months at 40°C, 3 months at 50°C and 1 month at 60°C. In addition, the heat‐stable carbetocin formulation was not sensitive to freezing or light. The reported highly stable peptide formulation facilitates the distribution in low and middle‐income countries, where maintaining cold chain distribution is difficult. Ferring Pharmaceuticals, the World Health Organization, and MSD # for Mothers have established a collaboration to develop this heat‐stable formulation of carbetocin for the prevention of post‐partum hemorrhage in women after vaginal childbirth, with the aim of making the medicine available in the public sector of developing countries that have a high burden of maternal mortality.     

Perovskite Solar Cells: Can We Go Organic‐Free,Lead‐Free,and Dopant‐Free?

Having demonstrated incredibly fast progress in power conversion efficiency, rising to a level comparable with that of crystalline silicon cells, lead‐based organic–inorganic hybrid perovskite solar cells are now facing the stability tests needed for industrialization. Poor thermal stability (<150 °C) owing to organic constituents and interlayer diffusion of materials (dopants), and environmental incompatibility due to Pb has surged the development of organic‐free, Pb‐free perovskites and dopant‐free hole transport materials (HTMs). The recent rapid increase in efficiency of cells based on inorganic perovskites, crossing 18%, demonstrates the great potential of inorganic perovskites as thermally stable and high‐efficiency cells. Although all kinds of Pb‐free perovskites lag in efficiency in comparison to the hybrid and inorganic perovskites, they also demonstrate better structural and environmental stability. The performance of dopant‐free HTMs matching/surpassing dopant‐containing HTMs makes the former a better choice for stability. Even though the efforts to enhance the stability of Pb‐based hybrid perovskites should continue by different techniques, organic‐free and lead‐free perovskites, and dopant‐free HTMs must be pursued with greater interest for the future. This review describes the present issues and possible strategies to address them, and thus will help to improve the overall performance of robust organic‐free, Pb‐free, and dopant‐free perovskite solar cells.     

Prepenetration and Penetration of Colletotrichum gloeosporioides into Guava Fruit (Psidium guajava L.): Effects of Temperature,Wetness Period and Fruit Age

In this study, we determined the influences of temperature, wetness period and guava fruit age on infection caused by Colletotrichum gloeosporioides. Optimal temperatures in vitro for germination, appressoria formation and melanization were 22.7, 20.6 and 23°C, respectively. In vivo, the optimal temperatures for germination and appressoria formation were 22.5 and 23°C, respectively. Values for germination, appressoria formation and melanization were higher as the wetness period increased. There was no difference in conidial germination and appressorial formation on fruit of different ages. On the surface of 10‐, 35‐ and 60‐day‐old fruit, despite the high percentage of appressorial formation, there was no development of the penetration peg. Penetration pegs were only observed on the 85‐ and 110‐day‐old fruit. Thickness of the cuticle, size and architecture of epidermal and parenchymal cells, as well as the content of phenolic compounds changed as the fruit ripened.     

Temperature-dependent development and immature survival of an aphidophagous ladybeetle, Propylea dissecta (Mulsant)

Development and survival of the immature stages of an aphidophagous ladybeetle, Propylea dissecta (Mulsant) was investigated at five constant temperatures, viz. 20, 25, 27, 30 and 35°C, using Aphis gossypii Glover as prey. Developmental period of all the life stages were significantly affected with change in constant temperature and developmental rate increased with increase in temperature. Theoretical lower thermal threshold for complete development and thermal constant was 10.39°C and 465.11 Day‐degrees, respectively. Of the various life stages, first instar larvae were most susceptible to mortality at temperatures between 20 and 30°C, whilst pre‐pupae suffered least mortality. Egg‐mortality was maximum at 35°C. Female biased sex ratios were obtained at all five temperatures tested with higher proportion of females at the extremes of temperature, thus suggesting that females are more thermal‐tolerant. Lowest mortality of immature stages with maximum larval survival and adult emergence was recorded at 27°C, while reverse was the case at 35°C. Thus, 27°C may be considered best for the laboratory rearing of P. dissecta.     

Progress of Lead‐Free Halide Double Perovskites

The field of halide metal perovskite photovoltaics has caught widespread interest in the last decade. This is seen in the rapid rise of power conversion efficiency, which is currently over 23%. It has also stimulated a widespread application of halide metal perovskites in other fields, such as light‐emitting diodes, field‐effect transistors, detectors, and lasers. Despite the fascinating characteristics of the halide metal perovskites, the presence of toxic lead (Pb) in their chemical composition is regarded as one of the major limiting factors preventing their commercialization. Addressing the toxicity issues in these compounds by a careful and strategic replacement of Pb²⁺ with other nontoxic candidate elements represents a promising direction to fabricate lead‐free optoelectronic devices. Such attempts yield a halide double perovskite structure which allows flexibility for various compositional adjustments. Here, the authors present the current progress and setbacks in crystal structures, materials preparation, optoelectronic properties, stability, and photovoltaic applications of lead‐free halide double perovskite compounds. Prospective research directions to improve the optoelectronic properties of existing materials are given that may help in the discovery of new lead‐free halide double perovskites.     

Synergic Interface Optimization with Green Solvent Engineering in Mixed Perovskite Solar Cells

Organic–inorganic hybrid halide perovskite solar cells (PSCs) have recently drawn enormous attentions due to their impressive performance (>22%) and low temperature solution processability (<150 °C). Current solution process involves application of a large amount of toxic solvents, such as chlorobenzene, which is heavily employed in both the perovskite layer and the hole transport layer (HTL) deposition. Herein, this study employs green solvent of ethyl acetate for engineering efficient perovskite and HTL layers, which enables a synergic interface (perovskite/HTL) optimization. A champion efficiency of 19.43% is obtained for small cells (0.16 cm² with mask) and over 14% for large size modules (5 × 5 cm²). The PSCs prepared from the green solvent engineering demonstrate superior performance on both efficiency and stability over their chlorobenzene counterparts. These enhancements are ascribed to the in situ inhibition on carrier recombination induced by interfacial defects during the solution processing, which enables about 2/3 reduction of calculated recombination rate. Thus, the green solvent route shows the great potential toward environmental‐friendly manufacturing.     

Correlating Phase Behavior with Photophysical Properties in Mixed‐Cation Mixed‐Halide Perovskite Thin Films

Mixed cation perovskites currently achieve very promising efficiency and operational stability when used as the active semiconductor in thin‐film photovoltaic devices. However, an in‐depth understanding of the structural and photophysical properties that drive this enhanced performance is still lacking. Here the prototypical mixed‐cation mixed‐halide perovskite (FAPbI₃)_0.85(MAPbBr₃)_0.15 is explored, and temperature‐dependent X‐ray diffraction measurements that are correlated with steady state and time‐resolved photoluminescence data are presented. The measurements indicate that this material adopts a pseudocubic perovskite α phase at room temperature, with a transition to a pseudotetragonal β phase occurring at ≈260 K. It is found that the temperature dependence of the radiative recombination rates correlates with temperature‐dependent changes in the structural configuration, and observed phase transitions also mark changes in the gradient of the optical bandgap. The work illustrates that temperature‐dependent changes in the perovskite crystal structure alter the charge carrier recombination processes and photoluminescence properties within such hybrid organic–inorganic materials. The findings have significant implications for photovoltaic performance at different operating temperatures, as well as providing new insight on the effect of alloying cations and halides on the phase behavior of hybrid perovskite materials.     

Ascocarp formation and survival and primary inoculum production in Erysiphe (sect. Microsphaera) pulchra in dogwood powdery mildew

Development of powdery mildew Erysiphe (sect. Microsphaera) pulchra in dogwood (Cornus florida) was assessed over a 5‐year period (1996–2000). Variations in the timing of initial infection, disease severity, ascocarp formation, and primary inoculum density were evaluated. Ascocarps formed late in the growing season (September‐November) when relatively low temperatures (< 27°C) persisted for at least 2 weeks, but ascocarp abundance was not influenced by disease severity. Studies conducted in a controlled environment showed that low temperatures triggered ascocarp formation and neither day length nor host plant age affected ascocarp formation. Ascocarps formed within 12–14 days at 18°C/ 10°C (day/night) and 23°C/15°C, but required 25 days at 26°C/18°C; no ascocarps formed at 28°C/ 20°C. Because ascocarps are an important source of primary inoculum for dogwood powdery mildew, ascocarp survival was evaluated in a 2‐year study (1998–2000). 60–80% of mature, dark‐coloured ascocarps survived at ‐10°C and ‐20°C and maintained viable spores for 4 months, but only 4–12% of partially developed, light brown ascocarps survived at ‐10°C and ‐20°C in the first experiment and only 30–40% survived in the second experiment. Immature ascocarp initials (cream‐yellow in colour) withered and disintegrated at all temperatures (24°C/20°C, 4°C, ‐10°C, and ‐20°C). Because ascocarps need time to mature, the timing of ascocarp initiation affects ascocarp maturity and thus winter survival and primary inoculum density. The evaluation of spring inoculum dispersal to spore traps and trap plants in 1999 and 2000 showed that rainfall patterns in early spring influenced primary inoculum and thus the timing of initial infection.     

Enhanced Stability of Perovskite Solar Cells Incorporating Dopant‐Free Crystalline Spiro‐OMeTAD Layers by Vacuum Sublimation

The main handicap still hindering the eventual exploitation of organometal halide perovskite‐based solar cells is their poor stability under prolonged illumination, ambient conditions, and increased temperatures. This article shows for the first time the vacuum processing of the most widely used solid‐state hole conductor (SSHC), i.e., the Spiro‐OMeTAD [2,2′,7,7′‐tetrakis (N,N‐di‐p‐methoxyphenyl‐amine) 9,9′‐spirobifluorene], and how its dopant‐free crystalline formation unprecedently improves perovskite solar cell (PSC) stability under continuous illumination by about two orders of magnitude with respect to the solution‐processed reference and after annealing in air up to 200 °C. It is demonstrated that the control over the temperature of the samples during the vacuum deposition enhances the crystallinity of the SSHC, obtaining a preferential orientation along the π–π stacking direction. These results may represent a milestone toward the full vacuum processing of hybrid organic halide PSCs as well as light‐emitting diodes, with promising impacts on the development of durable devices. The microstructure, purity, and crystallinity of the vacuum sublimated Spiro‐OMeTAD layers are fully elucidated by applying an unparalleled set of complementary characterization techniques, including scanning electron microscopy, X‐ray diffraction, grazing‐incidence small‐angle X‐ray scattering and grazing‐incidence wide‐angle X‐ray scattering, X‐ray photoelectron spectroscopy, and Rutherford backscattering spectroscopy.     

Extreme rainfall events and cooling of sea turtle clutches: Implications in the face of climate warming

Understanding how climate change impacts species and ecosystems is integral to conservation. When studying impacts of climate change, warming temperatures are a research focus, with much less attention given to extreme weather events and their impacts. Here, we show how localized, extreme rainfall events can have a major impact on a species that is endangered in many parts of its range. We report incubation temperatures from the world's largest green sea turtle rookery, during a breeding season when two extreme rainfall events occurred. Rainfall caused nest temperatures to drop suddenly and the maximum drop in temperature for each rain‐induced cooling averaged 3.6°C (n = 79 nests, min = 1.0°C, max = 7.4°C). Since green sea turtles have temperature‐dependent sex determination, with low incubation temperatures producing males, such major rainfall events may have a masculinization effect on primary sex ratios. Therefore, in some cases, extreme rainfall events may provide a “get‐out‐of‐jail‐free card” to avoid complete feminization of turtle populations as climate warming continues.