A Strategy for Synthesis of Carbon Nitride Induced Chemically Doped 2D MXene for High‐Performance Supercapacitor Electrodes

A step‐by‐step strategy is reported for improving capacitance of supercapacitor electrodes by synthesizing nitrogen‐doped 2D Ti₂CT_x induced by polymeric carbon nitride (p‐C₃N₄), which simultaneously acts as a nitrogen source and intercalant. The NH₂CN (cyanamide) can form p‐C₃N₄ on the surface of Ti₂CT_x nanosheets by a condensation reaction at 500–700 °C. The p‐C₃N₄ and Ti₂CT_x complexes are then heat‐treated to obtain nitrogen‐doped Ti₂CT_x nanosheets. The triazine‐based p‐C₃N₄ decomposes above 700 °C; thus, the nitrogen species can be surely doped into the internal carbon layer and/or defect site of Ti₂CT_x nanosheets at 900 °C. The extended interlayer distance and c‐lattice parameters (c‐LPs of 28.66 Å) of Ti₂CT_x prove that the p‐C₃N₄ grown between layers delaminate the nanosheets of Ti₂CT_x during the doping process. Moreover, 15.48% nitrogen doping in Ti₂CT_x improves the electrochemical performance and energy storage ability. Due to the synergetic effect of delaminated structures and heteroatom compositions, N‐doped Ti₂CT_x shows excellent characteristics as an electrochemical capacitor electrode, such as perfectly rectangular cyclic voltammetry results (CVs, R² = 0.9999), high capacitance (327 F g^?1 at 1 A g^?1, increased by ≈140% over pristine‐Ti₂CT_x), and stable long cyclic performance (96.2% capacitance retention after 5000 cycles) at high current density (5 A g^?1).     

Capture and Catalytic Conversion of Polysulfides by In Situ Built TiO2‐MXene Heterostructures for Lithium–Sulfur Batteries

The detrimental shuttle effect in lithium–sulfur batteries mainly results from the mobility of soluble polysulfide intermediates and their sluggish conversion kinetics. Herein, presented is a multifunctional catalyst with the merits of strong polysulfides adsorption ability, superior polysulfides conversion activity, high specific surface area, and electron conductivity by in situ crafting of the TiO₂‐MXene (Ti₃C₂T_x) heterostructures. The uniformly distributed TiO₂ on MXene sheets act as capturing centers to immobilize polysulfides, the hetero‐interface ensures rapid diffusion of anchored polysulfides from TiO₂ to MXene, and the oxygen‐terminated MXene surface is endowed with high catalytic activity toward polysulfide conversion. The improved lithium–sulfur batteries deliver 800 mAh g^?1 at 2 C and an ultralow capacity decay of 0.028% per cycle over 1000 cycles at 2 C. Even with a high sulfur loading of 5.1 mg cm^?2, the capacity retention of 93% after 200 cycles is still maintained. This work sheds new insights into the design of high‐performance catalysts with manipulated chemical components and tailored surface chemistry to regulate polysulfides in Li–S batteries.     

Achieving High Pseudocapacitance of 2D Titanium Carbide (MXene) by Cation Intercalation and Surface Modification

Supercapacitors attract great interest because of the increasing and urgent demand for environment‐friendly high‐power energy sources. Ti₃C₂, a member of MXene family, is a promising electrode material for supercapacitors owing to its excellent chemical and physical properties. However, the highest gravimetric capacitance of the MXene‐based electrodes is still relatively low (245 F g^?1) and the key challenge to improve this is to exploit more pseudocapacitance by increasing the active site concentration. Here, a method to significantly improve the gravimetric capacitance of Ti₃C₂T_x MXenes by cation intercalation and surface modification is reported. After K⁺ intercalation and terminal groups (OH^?/F^?) removing , the intercalation pseudocapacitance is three times higher than the pristine MXene, and MXene sheets exhibit a significant enhancement (about 211% of the origin) in the gravimetric capacitance (517 F g^?1 at a discharge rate of 1 A g^?1). Moreover, the as‐prepared electrodes show above 99% retention over 10 000 cycles. This improved electrochemical performance is attributed to the large interlayer voids of Ti₃C₂ and lowest terminated surface group concentration. This study demonstrates a new strategy applicable to other MXenes (Ti₂CT_x , Nb₂CT_x , etc.) in maximizing their potential applications in energy storage.     

Biomimetic MXene Textures with Enhanced Light‐to‐Heat Conversion for Solar Steam Generation and Wearable Thermal Management

2D materials are of particular interest in light‐to‐heat conversion, yet challenges remain in developing a facile method to suppress their light reflection. Herein, inspired by the black scales of Bitis rhinoceros, a generalized approach via sequential thermal actuations to construct biomimetic 2D‐material nanocoatings, including Ti₃C₂T_x MXene, reduced graphene oxide (rGO), and molybdenum disulfide (MoS₂) is designed. The hierarchical MXene nanocoatings result in broadband light absorption (up to 93.2%), theoretically validated by optical modeling and simulations, and realize improved light‐to‐heat performance (equilibrium temperature of 65.4 °C under one‐sun illumination). With efficient light‐to‐heat conversion, the bioinspired MXene nanocoatings are next incorporated into solar steam‐generation devices and stretchable solar/electric dual‐heaters. The MXene steam‐generation devices require much lower solar‐thermal material loading (0.32 mg cm^?2) and still guarantee high steam‐generation performance (1.33 kg m^?2 h^?1) compared with other state‐of‐the‐art devices. Additionally, the mechanically deformed MXene structures enable the fabrication of stretchable and wearable heaters dual‐powered by sunlight and electricity, which are reversibly stretched and heated above 100 °C. This simple fabrication process with effective utilization of active materials promises its practical application value for multiple solar–thermal technologies.     

Rational Design of Hydroxyl‐Rich Ti3C2Tx MXene Quantum Dots for High‐Performance Electrochemical N2 Reduction

To enable an efficient and cost‐effective electrocatalytic N₂ reduction reaction (NRR) the development of an electrocatalyst with a high NH₃ yield and good selectivity is required. In this work, Ti₃C₂T_x MXene‐derived quantum dots (Ti₃C₂T_x QDs) with abundant active sites enable the development of efficient NRR electrocatalysts. Given surface functional groups play a key role on the electrocatalytic performance, density functional theory calculations are first conducted, clarifying that hydroxyl groups on Ti₃C₂T_x offer excellent NRR activity. Accordingly, hydroxyl‐rich Ti₃C₂T_x QDs (Ti₃C₂OH QDs) are synthesized as NRR catalysts by alkalization and intercalation. This material offers an NH₃ yield and Faradaic efficiency of 62.94 µg h^?1 mg^?1_cat. and 13.30% at ?0.50 V, respectively, remarkably higher than reported MXene catalysts. This work demonstrates that MXene catalysts can be mediated through the optimization of both QDs sizes and functional groups for efficient ammonia production at room temperature.     

Self‐Assemble and In Situ Formation of Ni1−xFexPS3 Nanomosaic‐Decorated MXene Hybrids for Overall Water Splitting

Herein, the authors present the development of novel 0D–2D nanohybrids consisting of a nickel‐based bimetal phosphorus trisulfide (Ni_1?xFe_xPS₃) nanomosaic that decorates on the surface of MXene nanosheets (denoted as NFPS@MXene). The nanohybrids are obtained through a facile self‐assemble process of transition metal layered double hydroxide (TMLDH) on MXene surface; followed by a low temperature in situ solid‐state reaction step. By tuning the Ni:Fe ratio, the as‐synthesized NFPS@MXene nanohybrids exhibit excellent activities when tested as electrocatalysts for overall water splitting. Particularly, with the initial Ni:Fe ratio of 7:3, the obtained Ni_0.7Fe_0.3PS₃@MXene nanohybrid reveals low overpotential (282 mV) and Tafel slope (36.5 mV dec^?1) for oxygen evolution reaction (OER) in 1 m KOH solution. Meanwhile, the Ni_0.9Fe_0.1PS₃@MXene shows low overpotential (196 mV) for the hydrogen evolution reaction (HER) in 1 m KOH solution. When integrated for overall water splitting, the Ni_0.7Fe_0.3PS₃@MXene || Ni_0.9Fe_0.1PS₃@MXene couple shows a low onset potential of 1.42 V and needs only 1.65 V to reach a current density of 10 mA cm^?2, which is better than the all noble metal IrO₂ || Pt/C electrocatalyst (1.71 mV@10 mA cm^?2). Given the chemical versatility of Ni_1?xFe_xPS₃ and the convenient self‐assemble process, the nanohybrids demonstrated in this work are promising for energy conversion applications.     

Enhanced Rate Capability of Ion‐Accessible Ti3C2Tx‐NbN Hybrid Electrodes

Although 2D Ti₃C₂T_x is a good candidate for supercapacitors, the restacking of nanosheets hinders the ion transport significantly at high scan rates, especially under practical mass loading (>10 mg cm^?2) and thickness (tens of microns). Here, Ti₃C₂T_x‐NbN hybrid film is designed by self‐assembling Ti₃C₂T_x with 2D arrays of NbN nanocrystals. Working as an interlayer spacer of Ti₃C₂T_x, NbN facilitates the ion penetration through its 2D porous structure; even at extremely high scan rates. The hybrid film shows a thickness‐independent rate performance (almost the same rate capabilities from 2 to 20 000 mV s^?1) for 3 and 50 µm thick electrodes. Even a 109 µm thick Ti₃C₂T_x‐NbN electrode shows a better rate performance than 25 µm thick pure Ti₃C₂T_x electrodes. This method may pave a way to controlling ion transport in electrodes composed of 2D conductive materials, which have potential applications in high‐rate energy storage and beyond.     

2D Metal Zn Nanostructure Electrodes for High‐Performance Zn Ion Supercapacitors

Recent supercapacitors show a high power density with long‐term cycle life time in energy‐powering applications. A supercapacitor based on a single metal electrode accompanying multivalent cations, multiple charging/discharging kinetics, and high electrical conductivity is a promising energy‐storing system that replaces conventionally used oxide and sulfide materials. Here, a hierarchically nanostructured 2D‐Zn metal electrode‐ion supercapacitor (ZIC) is reported which significantly enhances the ion diffusion ability and overall energy storage performance. Those nanostructures can also be successfully plated on various flat‐type and fiber‐type current collectors by a controlled electroplating method. The ZIC exhibits excellent pseudocapacitive performance with a high energy density of 208 W h kg^?1 and a power density from 500 W kg^?1, which are significantly higher than those of previously reported supercapacitors with oxide and sulfide materials. Furthermore, the fiber‐type ZIC also shows high energy‐storing performance, outstanding mechanical flexibility, and waterproof characteristics, without any significant capacitance degradation during bending tests. These results highlight the promising possibility of nanostructured 2D Zn metal electrodes with the controlled electroplating method for future energy storage applications.     

High‐Performance Electrocatalytic Conversion of N2 to NH3 Using Oxygen‐Vacancy‐Rich TiO2 In Situ Grown on Ti3C2Tx MXene

To achieve the energy‐effective ammonia (NH₃) production via the ambient‐condition electrochemical N₂ reduction reaction (NRR), it is vital to ingeniously design an efficient electrocatalyst assembling the features of abundant surface deficiency, good dispersibility, high conductivity, and large surface specific area (SSA) via a simple way. Inspired by the fact that the MXene contains thermodynamically metastable marginal transition metal atoms, the oxygen‐vacancy‐rich TiO₂ nanoparticles (NPs) in situ grown on the Ti₃C₂T_x nanosheets (TiO₂/Ti₃C₂T_x) are prepared via a one‐step ethanol‐thermal treatment of the Ti₃C₂T_x MXene. The oxygen vacancies act as the main active sites for the NH₃ synthesis. The highly conductive interior untreated Ti₃C₂T_x nanosheets could not only facilitate the electron transport but also avoid the self‐aggregation of the TiO₂ NPs. Meanwhile, the TiO₂ NPs generation could enhance the SSA of the Ti₃C₂T_x in return. Accordingly, the as‐prepared electrocatalyst exhibits an NH₃ yield of 32.17 µg h^?1 mg^?1_cat. at ?0.55 V versus reversible hydrogen electrode (RHE) and a remarkable Faradaic efficiency of 16.07% at ?0.45 V versus RHE in 0.1 m HCl, placing it as one of the most promising NRR electrocatalysts. Moreover, the density functional theory calculations confirm the lowest NRR energy barrier (0.40 eV) of TiO₂ (101)/Ti₃C₂T_x compared with Ti₃C₂T_x or TiO₂ (101) alone.     

2D Materials for Large‐Area Flexible Thermoelectric Devices

The rapid development of the concept of the “Internet of Things (IoT)” requires wearable devices with maintenance‐free batteries, and thermoelectric energy conversion based on large‐area flexible materials has attracted much attention. Among large‐area flexible materials, 2D materials, such as graphene and related materials, are promising for thermoelectric applications due to their excellent transport properties and large power factors. In this Review, both single‐crystalline and polycrystalline 2D materials are surveyed using the experimental reports on thermoelectric devices of graphene, black phosphorus, transition metal dichalcogenides, and other 2D materials. In particular, their carrier‐density dependent thermoelectric properties and power factors maximized by Fermi level tuning techniques are focused. The comparison of the relevant performances between 2D materials and commonly used thermoelectric materials reveals the significantly enhanced power factors in 2D materials. Moreover, the current progress in thermoelectric module applications using large‐area 2D material thin films is summarized, which consequently offers great potential for the use of 2D materials in large‐area flexible thermoelectric device applications. Finally, important remaining issues and future perspectives, such as preparation methods, thermal transports, device designs, and promising effects in 2D materials, are discussed.     

3D Nanostructures for the Next Generation of High‐Performance Nanodevices for Electrochemical Energy Conversion and Storage

Among the different nanostructures that have been demonstrated as promising materials for various applications, 3D nanostructures have attracted significant attention as building blocks for constructing high‐performance nanodevices. Particularly over the last decade, considerable research efforts have been devoted to designing, fabricating, and evaluating 3D nanostructures as electrodes for electrochemical energy conversion and storage devices. Although remarkable progress has been achieved, the performance of electrochemical energy devices based on 3D nanostructures in terms of energy conversion efficiency, energy storage capability, and device reliability still needs to be significantly improved to meet the requirements for practical applications. Rather than simply outlining and comparing different 3D nanostructures, this article systematically summarizes the general advantages as well as the existing and future challenges of 3D nanostructures for electrochemical energy conversion and storage, focusing on photoelectrochemical water splitting, photoelectrocatalytic solar‐to‐fuels conversion from nitrogen and carbon dioxide, rechargeable metal‐ion batteries, and supercapacitors. A comprehensive understanding of these advantages and challenges shall provide valuable guidelines and enlightenments to facilitate the further development of 3D nanostructured materials, and contribute to the achieving more efficient energy conversion and storage technologies toward a sustainable energy future.     

Scalable Water‐Based Production of Highly Conductive 2D Nanosheets with Ultrahigh Volumetric Capacitance and Rate Capability

Highly conductive and ultrathin 2D nanosheets are of importance for the development of portable electronics and electric vehicles. However, scalable production and rational design for highly electronic and ionic conductive 2D nanosheets still remain a challenge. Herein, an industrially adoptable fluid dynamic exfoliation process is reported to produce large quantities of ionic liquid (IL)‐functionalized metallic phase MoS₂ (m‐MoS₂) and defect‐free graphene (Gr) sheets. Hybrid 2D–2D layered films are also fabricated by incorporating Gr sheets into compact m‐MoS₂ films. The incorporated IL functionalities and Gr sheets prevent aggregation and restacking of the m‐MoS₂ sheets, thereby creating efficient and rapid ion and electron pathways in the hybrid films. The hybrid film with a high packing density of 2.02 g cm^?3 has an outstanding volumetric capacitance of 1430.5 F cm^?3 at 1 A g^?1 and an extremely high rate capability of 80% retention at 1000 A g^?1. The flexible supercapacitor assembled using a polymer‐gel electrolyte exhibits excellent resilience to harsh electrochemical and mechanical conditions while maintaining an impressive rate performance and long cycle life. Successful achievement of an ultrahigh volumetric energy density (1.14 W h cm^?3) using an organic electrolyte with a wide cell voltage of ≈3.5 V is demonstrated.     

Fast Li Storage in MoS2‐Graphene‐Carbon Nanotube Nanocomposites: Advantageous Functional Integration of 0D, 1D,and 2D Nanostructures

A 3D porous composite consisting of nano‐0D MoS₂, nano‐1D carbon nanotubes (CNTs), and nano‐2D graphene is successful prepared using an electrostatic spray deposition (ESD) technique. Depending on the preparation procedure either nanodots of amorphous MoS₂ (0.5–5 nm) or nanocrystalline few‐layered MoS₂ (5–10 nm) bonded to graphene‐carbon nanotubes backbone are obtained. These functionalized carbon nanotubes adhere to a porous graphene‐based network. Such composites can be directly ­deposited on the current collectors without any binder or conductive additives to assemble a battery that shows superior rate performance and cycling ­stability. For nanodots, nucleation and diffusion issues usually connected with ­conversion are largely mitigated if not totally nullified. The use of mechanically and diffusionally isolated but electrochemically well connected electroactive nanodots offer an effective solution to render conversion reaction reversible. The use of nano‐1D and nano‐2D carbon structures offer additional electrical and mechanical advantages that are discussed. Furthermore, this technique, which is easily extendable to other electrode materials, seems to be of a great potential, especially for thin‐film batteries, flexible batteries, and future ­paintable batteries.     

2‐D PAGE and MS analysis of proteins from formalin‐fixed,paraffin‐embedded tissues

In the past decade, encouraging results have been obtained in extraction and analysis of proteins from formalin‐fixed, paraffin‐embedded (FFPE) tissues. However, 2‐D PAGE protein maps with satisfactory proteomic information and comparability to fresh tissues have never been described to date. In the present study, we report 2‐D PAGE separation and MS identification of full‐length proteins extracted from FFPE skeletal muscle tissue. The 2‐D protein profiles obtained from FFPE tissues could be matched to those achieved from frozen tissues replicates. Up to 250 spots were clearly detected in 2‐D maps of proteins from FFPE tissue following standard mass‐compatible silver staining. Protein spots from both FFPE and frozen tissue 2‐D gels were excised, subjected to in situ hydrolysis, and identified by MS analysis. Matched spots produced matched protein identifications. Moreover, 2‐D protein maps from FFPE tissues were successfully subjected to Western immunoblotting, producing comparable results to fresh‐frozen tissues. In conclusion, this study provides evidence that, when adequately extracted, full‐length proteins from FFPE tissues might be suitable to 2‐D PAGE‐MS analysis, allowing differential proteomic studies on the vast existing archives of healthy and pathological‐fixed tissues.     

Engineered MoSe2‐Based Heterostructures for Efficient Electrochemical Hydrogen Evolution Reaction

2D transition metal‐dichalcogenides are emerging as efficient and cost‐effective electrocatalysts for the hydrogen evolution reaction (HER). However, only the edge sites of their trigonal prismatic phase show HER‐electrocatalytic properties, while the basal plane, which is absent of defective/unsaturated sites, is inactive. Herein, the authors tackle the key challenge of increasing the number of electrocatalytic sites by designing and engineering heterostructures composed of single‐/few‐layer MoSe₂ flakes and carbon nanomaterials (graphene or single‐wall carbon nanotubes) produced by solution processing. The electrochemical coupling between the materials that comprise the heterostructure effectively enhances the HER‐electrocatalytic activity of the native MoSe₂ flakes. The optimization of the mass loading of MoSe₂ flakes and their electrode assembly via monolithic heterostructure stacking provides a cathodic current density of 10 mA cm^?2 at overpotential of 100 mV, a Tafel slope of 63 mV dec^?1, and an exchange current density (j₀) of 0.203 µA cm^?2. In addition, thermal and chemical treatments are exploited to texturize the basal planes of the MoSe₂ flakes (through Se‐vacancies creation) and to achieve in situ semiconducting‐to‐metallic phase conversion, respectively, thus they activate new HER‐electrocatalytic sites. The as‐engineered electrodes show a 4.8‐fold enhancement of j₀ and a decrease in the Tafel slope to 54 mV dec^?1.