Purification and characterisation of a novel enantioselective epoxide hydrolase from Aspergillus niger M200

Purification of a novel enantioselective epoxide hydrolase from Aspergillus niger M200 has been achieved using ammonium sulphate precipitation, ionic exchange, hydrophobic interaction, and size-exclusion chromatography, in conjunction with two additional chromatographic steps employing hydroxylapatite, and Mimetic Green. The enzyme was purified 186-fold with a yield of 15%. The apparent molecular mass of the enzyme was determined to be 77 kDa under native conditions and 40 kDa under denaturing conditions, implying a dimeric structure of the native enzyme. The isoelectric point of the enzyme was estimated to be 4.0 by isoelectric focusing electrophoresis. The enzyme has a broad substrate specificity with highest specificities towards tert-butyl glycidyl ether, para-nitrostyrene oxide, benzyl glycidyl ether, and styrene oxide. Enantiomeric ratios of 30 to more than 100 were determined for the hydrolysis reactions of 4 epoxidic substrates using the purified enzyme at a reaction temperature of 10 °C. Product inhibition studies suggest that the enzyme is able to differentiate to a high degree between the (R)-diol and (S)-diol product of the hydrolysis reaction with tert-butyl glycidyl ether as the substrate. The highest activity of the enzyme was at 42 °C and a pH of 6.8. Six peptide sequences, which were obtained by cleavage of the purified enzyme with trypsin and mass spectrometry analysis of the tryptic peptides, show high similarity with corresponding sequences originated from the epoxide hydrolase from Aspergillus niger LCP 521.     

Immobilization of the epoxide hydrolase from Aspergillus niger

Three methods for the immobilization of the epoxide hydrolase from the fungus Aspergillus niger were tested. The highest immobilization yield (90%) and retention of activity (65%) were obtained by adsorption onto DEAE-cellulose compared to adsorption onto hydrophobic porous polypropylene and covalent linkage using Eupergit resin. The enzymatic properties of the immobilized enzyme were similar to those of the free enzyme with respect to the effect of temperature and pH on both activity and stability as well as the effect of solvent (DMF) on activity. The kinetic parameters were affected leading to lower K _M(app) and higher Vm _(app).     

Purification and characterization of a novel carbaryl hydrolase from Aspergillus niger PY168

A fungus capable of using carbaryl as the sole source of carbon and energy was isolated from a soil enrichment, and characterized as Aspergillus niger and designated strain PY168. A novel carbaryl hydrolase from cell extract was purified 262-fold to apparent homogeneity with 13.6% overall recovery. It had a monomeric structure with a molecular mass of 50,000 Da and a pI of 4.6, and the enzyme activity was optimal at 45 degrees C and pH 7.5, The activities were strongly inhibited by Hg(2+), Ag+, rho-chloromercuribenzoate, iodoacetic acid, diisofluorophosphate and phenylmethylsulfonyl fluoride but not EDTA and phenanthroline. The purified enzyme hydrolyzed various N-methylcarbamate insecticides. Carbaryl is the preferred substrate.     

Effect of carbon and nitrogen sources on the production of a highly enantioselective epoxide hydrolase from Aspergillus niger

The highly enantioselective epoxide hydrolase from Aspergillus niger is well utilized as biocatalysts for the preparation of enantiopure chiral epoxides and diols. Both growth of the fungus and EH activity production were found greatly affected by changing the carbon or the nitrogen source with fructose and corn steep liquor being the best. Their concentrations were optimized (10 g.l–1 of fructose and 15 g.l–1 of corn steep) which resulted in an increase of both the biomass produced (31%) and the epoxide hydrolase specific activity (38%). The results obtained suggested a complex regulation of the EH production. On the whole, a two times increase of the total EH activity was obtained. © Rapid Science Ltd. 1998     

Cloning, expression, purification, and characterization of a novel epoxide hydrolase from Aspergillus niger SQ-6

A novel epoxide hydrolase from Aspergillus niger SQ-6 has now been cloned by inverse PCR. Its gene shows eight exons including a non-coding exon at its 5'-terminal (GenBank Accession No. AY966486). Phylogenetic analysis using deduced amino acid sequence (395 aa) confirms it as an epoxide hydrolase and shares 58.3% identity with that of A. niger LCP521 (GenBank Accession No. AF238460). The predicted catalytic triad is composed of Asp(191), His(369) and Glu(343). Active recombinant epoxide hydrolase has been successfully expressed in Escherichia coli as protein fusions with a poly-His tail. Scale-up fermentation can yield 2.5g/L of recombinant protein. The electrophoretic pure recombinant protein, which shows similar characterization as natural enzyme purified from A. niger SQ-6, can be easily purified by Ni(2+)-chelated affinity and gel-filtration chromatography. Optimal pH and temperature for purified enzyme are pH 7.5 and 37 degrees C, respectively. The K(m), k(cat) and maximal velocity (V(max)) for p-nitrostyrene oxide are determined to be 1.02mM, 172s(-1) and 231micromol min(-1)mg(-1), respectively. The enzyme can be inhibited by oxidant (H(2)O(2)), solvent (Tetrahydrofuran) and several metal ions including Hg(2+), Fe(2+) and Co(2+). This (R)-stereospecific epoxide hydrolase exhibits high enantioselectivity (enantiomeric excess value, 99%) for the less hindered carbon atom of epoxide. It may be an industrial biocatalyst for the preparation of enantiopure epoxides or vicinal diols.     

Enzymatic resolution of racemic phenyloxirane by a novel epoxide hydrolase from Aspergillus niger SQ-6 and its fed-batch fermentation

A microorganism with the ability to catalyze the resolution of racemic phenyloxirane was isolated and identified as Aspergillus niger SQ-6. Chiral capillary electrophoresis was successfully applied to separate both phenyloxirane and phenylethanediol. The epoxide hydrolase (EH) involved in this resolution process was (R)-stereospecific and constitutively expressed. When whole cells were used during the biotransformation process, the optimum temperature and pH for stereospecific vicinal diol production were 35°C and 7.0, respectively. After a 24-h conversion, the enantiomer excess of (R)-phenylethanediol produced was found to be >99%, with a conversion rate of 56%. In fed-batch fermentations at 30°C for 44 h, glycerol (20 g L⁻¹) and corn steep liquor (CSL) (30 g L⁻¹) were chosen as the best initial carbon and nitrogen sources, and EH production was markedly improved by pulsed feeding of sucrose (2 g L⁻¹ h⁻¹) and continuous feeding of CSL (1 g L⁻¹ h⁻¹) at a fermentation time of 28 h. After optimization, the maximum dry cell weight achieved was 24.5±0.8 g L⁻¹; maximum EH production was 351.2±13.1 U L⁻¹ with a specific activity of 14.3±0.5 U g⁻¹. Partially purified EH exhibited a temperature optimum at 37°C and pH optimum at 7.5 in 0.1 M phosphate buffer. This study presents the first evidence for the existence of a predicted epoxide racemase, which might be important in the synthesis of epoxide intermediates.     

Enantioselective hydrolysis of p-nitrostyrene oxide by an epoxide hydrolase preparation from Aspergillus niger

The epoxide hydrolase activity of Aspergillus niger was synthesized during growth of the fungus and was shown to be associated with the soluble cell fraction. An enzyme preparation was worked out which could be used in place of the whole mycelium as biocatalyst for the hydrolysis of epoxides. The effect of four different cosolvents on enzyme activity was investigated. Consequently, dimethylsulfoxide (DMSO) was selected for epoxide solubilization. The effect of temperature on both reaction rate and enzyme stability was studied in the presence of DMSO (0.2 volume ratio). A temperature of 25 degrees C was selected for the reaction of bioconversion. With a substrate concentration of 4.5 mM a batch reactor showed that the enzyme preparation hydrolyzed para-nitrostyrene oxide with very high enantioselectivity. The (S) enantiomer of the epoxide remained in the reaction mixture and showed an enantiomeric excess higher than 99%. The substrate concentration could be increased to 20 mM without affecting the enantiomeric excess and degree of conversion. Therefore, the method is potentially useful for the preparative resolution of epoxides. Application are in the field of chiral synthons which are important building blocks in organic synthesis. (c) 1996 John Wiley & Sons, Inc.     

Influence of pH on the expression of a recombinant epoxide hydrolase in Aspergillus niger

The filamentous fungus Aspergillus niger was investigated in relation to its ability to produce a soluble epoxide hydrolase (EH) (E.C. 3.3.2.3) belonging to the microsomal EH family. This EH is a highly useful biocatalyst for kinetic resolution of racemic epoxides to give enantiopure building blocks. The production of EH on an industrial scale is still a major challenge and is linked to various optimization processes. In this work, production of protein and organic acids as a function of pH and cultivation time was investigated. The production of EH was highest (1000 U/L for p-nitrostyrene oxide) under acidic fermentation conditions (pH value of about 3). The metabolic flux toward production of organic acids and thereby acidification of the environment increased with an increasing pH value. At pH 7, nearly 50% of total carbon of the substrate was incorporated into organic acids, mainly gluconic and oxalic acid. Finally, the addition of protease inhibitors, antioxidants and cryoprotectants was investigated in relation to the stability of the EH during the downstream process. The determination of the pH dependence during fermentation and understanding of the parameters influencing the stability of the enzyme has allowed us to optimize intracellular expression. The EH has been easily isolated from the biomass with high activity (1.67 U/mg lyophilisate) in a robust process.     

Homology modeling of a novel epoxide hydrolase (EH) from Aspergillus niger SQ-6: structure-activity relationship in expoxides inhibiting EH activity

The 3D structure of a novel epoxide hydrolase from Aspergillus niger SQ-6 (sqEH) was constructed by using homology modeling and molecular dynamics simulations. Based on the 3D model, Asp191, His369 and Glu343 were predicted as catalytic triad. The putative active pocket is a hydrophobic environment and is rich in some important non—polar residues (Pro318, Trp282, Pro319, Pro317 and Phe242). Using three sets of epoxide inhibitors for docking study, the interaction energies of sqEH with each inhibitor are consistent with their inhibitory effects in previous experiments. Moreover, a critical water molecule which closes to the His369 was identified to be an ideal position for the hydrolysis step of the reaction. Two tyrosine residues (Tyr249 and Tyr312) are able to form hydrogen bonds with the epoxide oxygen atom to maintain the initial binding and positioning of the substrate in the active pocket. These docked complex models can well interpret the substrate specificity of sqEH, which could be relevant for the structural—based design of specific epoxide inhibitors. Figure       

Purification and characterization of a chlorogenic acid hydrolase from Aspergillus niger catalysing the hydrolysis of chlorogenic acid

Among 15 Aspergillus strains, Aspergillus niger BRFM 131 was selected for its high chlorogenic acid hydrolase activity. The enzyme was purified and characterized with respect to its physico-chemical and kinetic properties. Four chromatographic steps were necessary to purify the protein to homogeneity with a recovery of 2%. Km of the chlorogenic acid hydrolase was estimated to be 10 microM against chlorogenic acid as substrate. Under native conditions, the protein presented a molecular mass of 170 kDa, and SDS-PAGE analysis suggested the presence of two identical 80 kDa subunits. Isoelectric point was 6.0; pH optimum for activity was determined to be 6.0 and temperature optima to be 55 degrees C. The N-terminal sequence did not present any homology with other cinnamoyl ester hydrolases previously described suggesting the purification of a new protein. The chlorogenic acid hydrolase was used successfully for the production of caffeic acid, which possesses strong antioxidant properties, from natural substrates specially rich in chlorogenic acid like apple marc and coffee pulp.     

Purification of hepoxilin epoxide hydrolase from rat liver

Hepoxilin epoxide hydrolase activity was demonstrated in rat liver cytosol using as substrate [1-14C] hepoxilin A3, a recently described hydroxy epoxide derivative of arachidonic acid. The enzyme was isolated and purified to apparent homogeneity using conventional chromatographic procedures resulting in 41-fold purification. The protein eluted during isoelectric focusing at a pI in the 5.3-5.4 range. The specific activity of the purified protein was 1.2 ng/microgram protein/20 min at 37 degrees C. On sodium dodecyl sulfate-polyacrylamide gel electrophoresis, under denaturing conditions, a molecular mass value of 53 kDa was observed. Using native polyacrylamide gel electrophoresis, enzyme activity corresponded to the main protein band. The purified protein used hepoxilin A3 as preferred substrate converting it to trioxilin A3. The enzyme was marginally active toward other epoxides such as leukotriene A4 and styrene oxide. The Mr, pI, and substrate specificity of the hepoxilin epoxide hydrolase indicate that this enzyme is different from the recently reported leukotriene A4 hydrolase from human erythrocytes and rat and human neutrophils and constitutes a hitherto undescribed form of epoxide hydrolase with specificity toward hepoxilin A3. Tissue screening for enzyme activity revealed that this enzyme is ubiquitous in the rat.     

Purification of an epoxide hydrolase from Rhodotorula glutinis

The epoxide hydrolase from Rhodotorula glutinis was isolated and initially characterized. The enzyme was membrane associated and could be solubilized by Triton X-100. Purification yielded an enzyme with sp. act. of 66 mol 1,2-epoxyhexane hydrolyzed min^–1 mg^–1 protein. The enzyme was not completely purified to homogeneity but, nevertheless, a major protein was isolated by SDS-PAGE for subsequential amino acid determination of peptide fragments. From sequence alignments to related enzymes, a high homology towards the active site sequences of other microsomal epoxide hydrolases was found. Molecular mass determinations indicated that the native enzyme exists as a homodimer, with a subunit molecular mass of about 45 kDa. Based upon these, this epoxide hydrolase is structurally related to other microsomal epoxide hydrolases.     

A novel enantioselective epoxide hydrolase from Agromyces mediolanus ZJB120203: Cloning,characterization and application

A new strain Agromyces mediolanus ZJB120203, capable of enantioselective epoxide hydrolase (EH) activity was isolated employing a newly established colorimetric screening and chiral GC analysis method. The partial nucleotide sequence of an epoxide hydrolase (AmEH) gene from A. mediolanus ZJB120203 was obtained by PCR using degenerate primers designed based on the conserved domains of EHs. Subsequently, an open reading frame containing 1167 bp and encoding 388 amino acids polypeptide were identified. Expression of AmEH was carried out in Escherichia coli and purification was performed by Nickel-affinity chromatography. The purified AmEH had a molecular weight of 43 kDa and showed its optimum pH and temperature at 8.0 and 35 °C, respectively. Moreover, this AmEH showed broad substrates specificity toward epoxides. In this study, it is demonstrated that the AmEH could unusually catalyze the hydrolysis of (R)-ECH to produce enantiopure (S)-ECH. Enantiopure (S)-ECH could be obtained with enantiomeric excess (ee) of >99% and yield of 21.5% from 64 mM (R,S)-ECH. It is indicated that AmEH from A. mediolanus is an attractive biocatalyst for the efficient preparation of optically active ECH.     

Isolation of a highly enantioselective epoxide hydrolase from Rhodococcus sp. NCIMB 11216

Summary Whole cells of Rhodococcus sp. NCIMB 11216 catalyze the asymmetric hydrolysis of racemic epoxides giving access to chiral epoxides and diols, which are important chiral building blocks for the synthesis of bioactive compounds. Employing a four-step purification procedure, the epoxide hydrolase responsible for the reaction was isolated and characterized to be a cofactor-independent, soluble monomeric protein of ~35kDa, exhibiting an isoelectric point of 4.7.     

Purification and characterization of a protease-resistant cellulase from Aspergillus niger

An endo-β-1,4-glucanase (EC 3.2.1.4) was purified from a culture filtrate of Aspergillus niger IFO31125 by column chromatography through TSK-gel DEAE-3SW and TSK-gel DEAE-5PW, and by gel filtration through TSK-gel G2000SW by high performance liquid chromatography. The enzyme was estimated to have a molecular weight of about 40 kDa by both gel filtration and SDS-polyacrylamide gel electrophoresis, and appeared to consist of a monomeric protein. It contained 8.9% carbohydrate. The optimal pH for activity was 6.0–7.0, and the stable pH range was 5.0–10.0. The optimum temperature at pH 6.0 was around 70°C. The enzyme was very thermally stable and no loss of original activity was found on incubation at 60°C for 2 h. The enzyme efficiently hydrolyzed carboxymethylcellulose and lichenan, but crystalline forms of cellulose, curdlan, laminarin, cellobiose, p-nitrophenyl-β-d-glucopyranoside and p-nitrophenyl-β-d-cellobioside were barely hydrolyzed. The activity of the enzyme was inhibited by Hg²⁺ and Cu²⁺ but was not affected by other inhibitors of thiol enzymes such as p-chloromercuribenzoate and N-ethylmaleimide. N-Bromosuccinimide showed a strong inhibitory effect, suggesting that a tryptophan residue is essential for the activity of the enzyme. The N-terminal amino acid sequence of the enzyme showed considerable homology to those of endo-β-1,4-glucanases from some other microorganisms, including Sclerotinia sclerotiorum and Schizophyllum commune. The enzyme had very strong protease-resistance, and showed no loss of activity when incubated with proteases such as Savinase at 40°C, even for 2 weeks.     

Purification and properties of a cellulase from Aspergillus niger.

A cellulolytic enzyme was isolated from a commercial cellulase preparation form Aspergillus niger. A yield of about 50mg of enzyme was obtained per 100g of commerial cellulase. The isolated enzyme was homogeneous in the ultracentrifuge at pH 4.0 and 8.0, and in sodium dodecyl sulphate/polyacrylamide-gel electrophoresis but showed one major and two minor bands in disc gel electrophoresis. No carbohydrate was associated with the protein. Amino acid analysis revealed that the enzyme was rich in acidic and aromatic amino acids. Data from the amino acid composition and dodecyl sulphate/polyacrylamide-gel electrophoresis indicated a molecular weight of 26000. The purified enzyme was active towards CM-cellulose, but no activity towards either cellobiose or p-nitrophenyl beta-D-glucoside was detected under the assay conditions used. The pH optimum for the enzyme was pH 3.8-4.0, and it was stable at 25 degrees C over the range pH 1-9; maximum activity (at pH 4.0) was obtained at 45 degrees C. The cellulase was more stable to heat treatment at pH 8.0 than at 4.0. Kinetic studies gave pK values between 4.2 and 5.3 for groups involved in the enzyme-substrate complex.     

Purification and characterization of a beta-glucuronidase from Aspergillus niger.

A beta-glucuronidase from Pectinex Ultra SP-L, a commercial pectolytic enzyme preparation from Aspergillus niger, was purified 170-fold by ion-exchange chromatography and gel filtration. Apparent M(r) of the purified enzyme, estimated by denaturing gel electrophoresis and size-exclusion chromatography, were 68,000 and 71,000, respectively, indicating that the enzyme is a monomeric protein. It released uronic acids not only from p-nitrophenyl beta-glucosiduronic acid (PNP-GlcA) but also from acidic galactooligosaccharides carrying either beta-D-glucosyluronic or 4-O-methyl-beta-D-glucosyluronic residues at the nonreducing termini through beta-(1-->6)-glycosidic linkages. The enzyme exhibited a maximal activity toward these substrates at pH 3.0. A regioisomer, 3-O-beta-glucosyluronic acid-galactose, was unsusceptible to the enzyme. The enzyme did act on a polymer substrate, releasing uronic acid from the carbohydrate portion of a radish arabinogalactan-protein modified by treatment with fungal alpha-L-arabinofuranosidase. The enzyme produced acidic oligosaccharides by transglycosylation, catalyzing the transfer of uronic acid residues of PNP-GlcA and 6-O-beta-glucosyluronic acid-galactose to certain exogenous acceptor sugars such as Gal, N-acetylgalactosamine, Glc, and xylose.     

Purification and characterization of a recombinantCaulobacter crescentus epoxide hydrolase

ACaulobacter crescentus epoxide hydrolase (CCEH) from a recombinantEscherichia coli was purified to homogeneity using a three-step procedure. The CCEH protein was purified 7.3-fold with a 22.9% yield in overall activity. The optimal reaction temperature and pH were determined to be 37°C and pH 8.0, respectively. The addition of 10% (v/v) dimethylsulfoxide as a cosolvent improved the enantioselectivity of CCEH for a batch kinetic resolution of racemic indene oxide.