An efficient and economic enhancer mix for PCR

Polymerase chain reaction (PCR) has become a fundamental technique in molecular biology. Nonetheless, further improvements of the existing protocols are required to broaden the applicability of PCR for routine diagnostic purposes, to enhance the specificity and the yield of PCRs as well as to reduce the costs for high-throughput applications. One known problem typically reported in PCR experiments is the poor amplification of GC-rich DNA sequences. Here we designed and tested a novel effective and low-cost PCR enhancer, a concentration-dependent combination of betaine, dithiothreitol, and dimethyl sulfoxide that broadly enhanced the quantitative and/or qualitative output of PCRs. Additionally, we showed that the performances of this enhancer mix are comparable to those of commercially available PCR additives and highly effective with different DNA polymerases. Thus, we propose the routine application of this PCR enhancer mix for low- and high-throughput experiments.     

Selective quantification of viable Escherichia coli bacteria in biosolids by quantitative PCR with propidium monoazide modification

Quantitative differentiation of live cells in biosolids samples, without the use of culturing-based approaches, is highly critical from a public health risk perspective, as recent studies have shown significant regrowth and reactivation of indicator organisms. Persistence of DNA in the environment after cell death in the range of days to weeks limits the application of DNA-based approaches as a measure of live cell density. Using selective nucleic acid intercalating dyes like ethidium monoazide (EMA) and propidium monoazide (PMA) is one of the alternative approaches to detecting and quantifying viable cells by quantitative PCR. These compounds have the ability to penetrate only into dead cells with compromised membrane integrity and intercalate with DNA via their photoinducible azide groups and in turn inhibit DNA amplification during PCRs. PMA has been successfully used in different studies and microorganisms, but it has not been evaluated sufficiently for complex environmental samples such as biosolids. In this study, experiments were performed with Escherichia coli ATCC 25922 as the model organism and the uidA gene as the target sequence using real-time PCR via the absolute quantification method. Experiments with the known quantities of live and dead cell mixtures showed that PMA treatment inhibits PCR amplification from dead cells with over 99% efficiency. The results also indicated that PMA-modified quantitative PCR could be successfully applied to biosolids when the total suspended solids (TSS) concentration is at or below 2,000 mg·liter(-1).     

A catalytic antioxidant metalloporphyrin blocks hydrogen peroxide-induced mitochondrial DNA damage

Reactive oxygen species (ROS) have been implicated as the cause of cumulative damage to DNA, proteins and lipids that can ultimately result in cell death. A common problem when measuring oxidative DNA damage has been the introduction of modifications in the native state of the molecule by many DNA isolation methods. We circumvented this problem by employing direct PCR (DPCR) of whole cell lysates. DPCR of mouse lung fibroblasts performed better than PCRs containing template acquired by phenol/chloroform extraction or a commercially available genomic DNA isolation kit. We investigated the direct use of whole cell preparations in the polymerase chain reaction (PCR) to detect hydrogen peroxide (H₂O₂)-mediated DNA damage. We observed a concentration-dependent decrease in amplification efficiency of a 4.3 kb mitochondrial (mt)DNA target in H₂O₂-treated mouse lung fibroblasts (MLFs). At low doses the efficiency of amplification returns to control levels over 24 h. We detected no change in amplification efficiency of a plasmid control containing our mtDNA target under any of the culture conditions employed in these studies. Treatment of MLFs with the catalytic antioxidant manganese(III) meso-tetrakis(4-benzoic acid)porphyrin (MnTBAP) attenuates the effects of H₂O₂ exposure. When quantitated with an external standard the use of DPCR in tandem with a PCR amplification efficiency assay provides a powerful approach to assess oxidative mtDNA damage.     

Development of a multiplex PCR assay for simultaneous detection of Theileria annulata,Babesia bovis and Anaplasma marginale in cattle

Tropical theileriosis, bovine babesiosis and anaplasmosis are tick-borne protozoan diseases that impose serious constraints on the health and productivity of domestic cattle in tropical and sub-tropical regions of the world. A common feature of these diseases is that, following recovery from primary infection, animals become persistent carriers of the pathogen and continue to play a critical role in disease epidemiology, acting as reservoirs of infection. This study describes development and evaluation of multiplex and single PCR assays for simultaneous detection of Theileria annulata, Babesia bovis and Anaplasma marginale in cattle. Following in silico screening for candidate target genes representing each of the pathogens, an optimised multiplex PCR assay was established using three primer sets, cytob1, MAR1bB2 and bovar2A, for amplification of genomic DNA of T. annulata, A. marginale and B. bovis respectively. The designed primer sets were found to be species-specific, generating amplicons of 312, 265 and 166 base pairs, respectively and were deemed suitable for the development of a multiplex assay. The sensitivity of each primer pair was evaluated using serial dilutions of parasite DNA, while specificity was confirmed by testing for amplification from DNA of different stocks of each pathogen and other Theileria, Babesia and Anaplasma species. Additionally, DNA preparations derived from field samples were used to evaluate the utility of the single and multiplex PCRs for determination of infection status. The multiplex PCR was found to detect each pathogen species with the same level of sensitivity, irrespective of whether its DNA was amplified in isolation or together with DNA representing the other pathogens. Moreover, single and multiplex PCRs were able to detect each species with equal sensitivity in serially diluted DNA representing mixtures of T. annulata, B. bovis and A. marginale, and no evidence of non-specific amplification from non-target species was observed. Validation that the multiplex PCR efficiently detects single and mixed infections from field samples was demonstrated. The developed assay represents a simple and efficient diagnostic for co-detection of tropical theileriosis, bovine babesiosis and anaplasmosis, and may be a valuable tool for epidemiological studies aimed at assessing the burden of multiple infection with tick-borne pathogens and improving control of the associated diseases in endemic regions.     

Genome-scale design of PCR primers and long oligomers for DNA microarrays

During the last years, the demand for custom-made cDNA chips/arrays as well as whole genome chips is increasing rapidly. The efficient selection of gene-specific primers/oligomers is of the utmost importance for the successful production of such chips. We developed GenomePRIDE, a highly flexible and scalable software for designing primers/oligomers for large-scale projects. The program is able to generate either long oligomers (40–70 bases), or PCR primers for the amplification of gene-specific DNA fragments of user-defined length. Additionally, primers can be designed in-frame in order to facilitate large-scale cloning into expression vectors. Furthermore, GenomePRIDE can be adapted to specific applications such as the generation of genomic amplicon arrays or the design of fragments specific for alternative splice isoforms. We tested the performance of GenomePRIDE on the entire genomes of Listeria monocytogenes (1584 gene-specific PCRs, 48 long oligomers) as well as of eukaryotes such as Schizosaccharomyces pombe (5006 gene-specific PCRs), and Drosophila melanogaster (21 306 gene-specific PCRs). With its computing speed of 1000 primer pairs per hour and a PCR amplification success of 99%, GenomePRIDE represents an extremely cost- and time-effective program.     

Improved methods for the detection of Bacillus anthracis spores by the polymerase chain reaction

Polymerase chain reactions (PCRs) for the capsule and oedema factor genes of Bacillus anthracis were used to assess methods for detecting B. anthracis spores. Untreated spore preparations were found to contain significant amounts of extracellular template DNA which probably accounted for observed amplification from these preparations without spore lysis. Germination of spores with suitable media allowed the detection of less than 10 spores in a PCR test. Mechanical disruption of spores with glass or zirconia beads yielded similar results to germination but in a much shorter time. The techniques described should improve the detection by PCR of B. anthracis and other sporulating bacteria.     

Knockout confirmation for Hurries: rapid genotype identification of Trypanosoma cruzi transfectants by polymerase chain reaction directly from liquid culture

Gene knockout is a widely used approach to evaluate loss-of-function phenotypes and it can be facilitated by the incorporation of a DNA cassette having a drug-selectable marker. Confirmation of the correct knockout cassette insertion is an important step in gene removal validation and has generally been performed by polymerase chain reaction (PCR) assays following a time-consuming DNA extraction step. Here, we show a rapid procedure for the identification of Trypanosoma cruzi transfectants by PCR directly from liquid culture - without prior DNA extraction. This simple approach enabled us to generate PCR amplifications from different cultures varying from 10⁶-10⁸ cells/mL. We also show that it is possible to combine different primer pairs in a multiplex detection reaction and even to achieve knockout confirmation with an extremely simple interpretation of a real-time PCR result. Using the “culture PCR” approach, we show for the first time that we can assess different DNA sequence combinations by PCR directly from liquid culture, saving time in several tasks for T. cruzi genotype interrogation.     

Deconstructing the Polymerase Chain Reaction: Understanding and Correcting Bias Associated with Primer Degeneracies and Primer-Template Mismatches

The polymerase chain reaction (PCR) is sensitive to mismatches between primer and template, and mismatches can lead to inefficient amplification of targeted regions of DNA template. In PCRs in which a degenerate primer pool is employed, each primer can behave differently. Therefore, inefficiencies due to different primer melting temperatures within a degenerate primer pool, in addition to mismatches between primer binding sites and primers, can lead to a distortion of the true relative abundance of targets in the original DNA pool. A theoretical analysis indicated that a combination of primer-template and primer-amplicon interactions during PCR cycles 3–12 is potentially responsible for this distortion. To test this hypothesis, we developed a novel amplification strategy, entitled “Polymerase-exonuclease (PEX) PCR”, in which primer-template interactions and primer-amplicon interactions are separated. The PEX PCR method substantially and significantly improved the evenness of recovery of sequences from a mock community of known composition, and allowed for amplification of templates with introduced mismatches near the 3’ end of the primer annealing sites. When the PEX PCR method was applied to genomic DNA extracted from complex environmental samples, a significant shift in the observed microbial community was detected. Furthermore, the PEX PCR method provides a mechanism to identify which primers in a primer pool are annealing to target gDNA. Primer utilization patterns revealed that at high annealing temperatures in the PEX PCR method, perfect match annealing predominates, while at lower annealing temperatures, primers with up to four mismatches with templates can contribute substantially to amplification. The PEX PCR method is simple to perform, is limited to PCR mixes and a single exonuclease step which can be performed without reaction cleanup, and is recommended for reactions in which degenerate primer pools are used or when mismatches between primers and template are possible.     

Collecting in collections: a PCR strategy and primer set for DNA barcoding of decades‐old dried museum specimens

Natural history museums are vastly underutilized as a source of material for DNA analysis because of perceptions about the limitations of DNA degradation in older specimens. Despite very few exceptions, most DNA barcoding projects, which aim to obtain sequence data from all species, generally use specimens collected specifically for that purpose, instead of the wealth of identified material in museums, constrained by the lack of suitable PCR methods. Any techniques that extend the utility of museum specimens for DNA analysis therefore are highly valuable. This study first tested the effects of specimen age and PCR amplicon size on PCR success rates in pinned insect specimens, then developed a PCR primer set and amplification strategy allowing greatly increased utilization of older museum specimens for DNA barcoding. PCR success rates compare favourably with the few published studies utilizing similar aged specimens, and this new strategy has the advantage of being easily automated for high‐throughput laboratory workflows. The strategy uses hemi‐nested, degenerate, M13‐tailed PCR primers to amplify two overlapping amplicons, using two PCRs per amplicon (i.e. four PCRs per DNA sample). Initial PCR products are reamplified using an internal primer and a M13 primer. Together the two PCR amplicons yield 559 bp of the COI gene from Coleoptera, Lepidoptera, Diptera, Hemiptera, Odonata and presumably also other insects. BARCODE standard‐compliant data were recovered from 67% (56 of 84) of specimens up to 25 years old, and 51% (102 of 197) of specimens up to 55 years old. Given the time, cost and specialist expertise required for fieldwork and identification, ‘collecting in collections’ is a viable alternative allowing researchers to capitalize on the knowledge captured by curation work in decades past.     

Mutation enrichment in human DNA samples via UV-mediated cross-linking

Detection of low-level DNA mutations can reveal recurrent, hotspot genetic changes of clinical relevance to cancer, prenatal diagnostics, organ transplantation or infectious diseases. However, the high excess of wild-type (WT) alleles, which are concurrently present, often hinders identification of salient genetic changes. Here, we introduce UV-mediated cross-linking minor allele enrichment (UVME), a novel approach that incorporates ultraviolet irradiation (∼365 nm UV) DNA cross-linking either before or during PCR amplification. Oligonucleotide probes matching the WT target sequence and incorporating a UV-sensitive 3-cyanovinylcarbazole nucleoside modification are employed for cross-linking WT DNA. Mismatches formed with mutated alleles reduce DNA binding and UV-mediated cross-linking and favor mutated DNA amplification. UV can be applied before PCR and/or at any stage during PCR to selectively block WT DNA amplification and enable identification of traces of mutated alleles. This enables a single-tube PCR reaction directly from genomic DNA combining optimal pre-amplification of mutated alleles, which then switches to UV-mediated mutation enrichment-based DNA target amplification. UVME cross-linking enables enrichment of mutated KRAS and p53 alleles, which can be screened directly via Sanger sequencing, high-resolution melting, TaqMan genotyping or digital PCR, resulting in the detection of mutation allelic frequencies of 0.001–0.1% depending on the endpoint detection method. UV-mediated mutation enrichment provides new potential for mutation enrichment in diverse clinical samples.     

Multiplex amplification of ancient DNA

This method is designed to assemble long, continuous DNA sequences using minimal amounts of fragmented ancient DNA as template. This is achieved by a two-step approach. In the first step, multiple fragments are simultaneously amplified in a single multiplex reaction. Subsequently, each of the generated fragments is amplified individually using a single primer pair, in a standard simplex (monoplex) PCR. The ability to amplify multiple fragments simultaneously in the first step allows the generation of large amounts of sequence from rare template DNA, whereas the second nested step increases specificity and decreases amplification of contaminating DNA. In contrast to current protocols using many template-consuming simplex PCRs, the method described allows amplification of several kilobases of sequence in just one reaction. It thus combines optimal template usage with a high specificity and can be performed within a day.     

Usefulness of strb1 and 16S rDNA-targeted PCR for detection of Streptomyces spp. in environmental samples

In this study, we revealed rapid detection of streptomycin-producing Streptomyces spp. by extraction of total soil DNA from 14 soil samples using a modified lysis method followed by PCR amplification ofa genus-specific sequence in the Streptomyces' 16S rDNA gene. DNA band of the expected size (438 bp) was seen with all the samples. Additionally, specific amplification of the streptomycin-coding gene (strb1) directly from soil revealed the presence of a single DNA band of 940 bp. These results indicate that PCR-amplification of Streptomyces specific genes could be used for direct detection of streptomycin-producing Streptomyces species from soil.     

Real-time fluorescence loop mediated isothermal amplification for the diagnosis of malaria

BACKGROUND: Molecular diagnostic methods can complement existing tools to improve the diagnosis of malaria. However, they require good laboratory infrastructure thereby restricting their use to reference laboratories and research studies. Therefore, adopting molecular tools for routine use in malaria endemic countries will require simpler molecular platforms. The recently developed loop-mediated isothermal amplification (LAMP) method is relatively simple and can be improved for better use in endemic countries. In this study, we attempted to improve this method for malaria diagnosis by using a simple and portable device capable of performing both the amplification and detection (by fluorescence) of LAMP in one platform. We refer to this as the RealAmp method. METHODOLOGY AND SIGNIFICANT FINDINGS: Published genus-specific primers were used to test the utility of this method. DNA derived from different species of malaria parasites was used for the initial characterization. Clinical samples of P. falciparum were used to determine the sensitivity and specificity of this system compared to microscopy and a nested PCR method. Additionally, directly boiled parasite preparations were compared with a conventional DNA isolation method. The RealAmp method was found to be simple and allowed real-time detection of DNA amplification. The time to amplification varied but was generally less than 60 minutes. All human-infecting Plasmodium species were detected. The sensitivity and specificity of RealAmp in detecting P. falciparum was 96.7% and 91.7% respectively, compared to microscopy and 98.9% and 100% respectively, compared to a standard nested PCR method. In addition, this method consistently detected P. falciparum from directly boiled blood samples. CONCLUSION: This RealAmp method has great potential as a field usable molecular tool for diagnosis of malaria. This tool can provide an alternative to conventional PCR based diagnostic methods for field use in clinical and operational programs.     

Detection and Identification of Brenneria nigrifluens, the Causal Agent of the Shallow Bark Canker of Walnut by, PCR Amplification

A 1 kb DNA band from strains of Brenneria nigrifluens, as shown by amplification of their genomic DNA by polymerase chain reaction (PCR) using minisatellite primer designed on the minisatellite sequence of the M13 phage, was isolated, cloned and sequenced. Specific oligonucleotides (F1–C3) were selected into this 1 kb DNA sequence and used in a PCR assay to detect and identify strains of B. nigrifluens . Several strains of B. nigrifluens were assessed with F1–C3 primers producing a specific band of approximately 250 bp pairs in length. This target was successfully amplified from purified genomic DNA, from bacterial culture and directly from infected walnut bark tissue. No amplification was obtained when the PCR assay was performed on other plant-pathogenic species from the following genera Brenneria, Erwinia, Agrobacterium, Pseudomonas, Ralstonia, Pectobacterium, Xanthomonas and from walnut-associated bacteria, indicating the specificity of these primers. The PCR assay with the primers described here provides a rapid, specific and sensitive diagnostic method for B. nigrifluens and a useful tool for epidemiological studies.     

Chip ligating human genomic DNA serves as storage material and template for polymerase chain reaction

A chip was developed to store DNA for medical research. The optional restriction site fixed on the chip can randomly ligate with whole human genomic DNA treated by the corresponding restriction enzyme. PCR can then use the chip as template DNA. Moreover, a chip fixing two restriction sites (e.g. EcoRI and HindIII) showed the amplification by PCR for any location of genomic DNA. Repetitive PCRs have confirmed that a DNA chip can be stored by at –4 °C for 2 years.     

Direct PCR on fruitflies and blood flukes without prior DNA isolation.

DNA is the essential substrate for the polymerase chain reaction (PCR). Standard protocols include a DNA purification step, but this is laborious if a large number of DNA preparations have to be performed, although a variety of simple methods exist for the isolation of crude DNA for PCR. For microorganisms, PCR protocols exist that allow the amplification of sequences directly from the organism without DNA purification. The results introduced in this paper demonstrate that a direct PCR approach also works with fruitflies and blood flukes as examples for intact multicellular organisms.     

Two-step total gene synthesis method

In the post-genomic era, the ability to synthesize any arbitrary DNA sequence is increasingly in demand. A bottleneck in current gene synthesis technologies is the associated cost, due primarily to the high cost of oligonucleotides synthesis and post-synthesis sequencing. In the present paper, an improved method for low-cost gene synthesis that combines dual asymmetrical PCR and overlap extension PCR is presented, which enables any DNA sequence to be synthesized error free. Additionally, the method is easily amenable to automation.     

免疫胶体金法提取环境标本中细菌DNA技术

将抗-DNA单克隆抗体标记在胶体金颗粒上制成免疫胶体金试剂,提取标本中DNA,直接用于PCR检测,从而建立一种简单、快速、高效的免疫胶体金方法提取环境标本中的DNA。结果表明：应用免疫胶体金试剂可有效去除环境标本中PCR抑制剂,浓缩模板,提高PCR检测敏感度3～4个数量级。操作步骤简单,无需使用有机溶剂,避免环境污染,吸附了DNA的免疫胶体金可直接用于PCR扩增。研制了免疫胶体金试剂并确定其最佳反应条件,有效提高PCR技术在检测现场环境标本中的敏感性和实用性。