Temporin A and its retro-analogues: synthesis, conformational analysis and antimicrobial activities.

Temporin A (TA) is a hydrophobic peptide isolated from the skin of the European red frog Rana temporaria. Strong antimicrobial activity against gram-positive cocci and Candida, as well as its small molecular weight (10-13 aa residues), makes TA an interesting antimicrobial compound. However, its synthesis is rather problematic. Here, the synthesis of two retro-analogues of TA--retro-TA and (6-1)(7-13)-TA--is reported. The synthesis of retro-TA was performed without any problems, while during the synthesis of (6-1)(7-13)-TA problems similar to those encountered during the synthesis of TA were faced. Antimicrobial assays showed minimal inhibitory concentration (MIC) values of retro-TA to be, in most cases, only one dilution higher than those of original TA, but still remained relatively low. An analysis of the circular dichroism spectra of the peptides shows that TA and (6-1)(7-13)-TA adopt an alpha-helical structure in a hydrophobic environment, while retro-TA forms mainly unordered conformation under both hydrophobic and hydrophilic conditions. One can postulate that differences in conformation of the peptide chain might be responsible for the lower antimicrobial activity of retro-TA as compared to that of the parent molecule. In any case, retro-TA can be interesting owing to its simple and nonproblematic synthesis.     

Solution structure of the osteogenic 1-31 fragment of the human parathyroid hormone

The solution conformations of a selectively osteogenic 1-31 fragment of the human parathyroid hormone (hPTH), hPTH(1-31)NH(2), have been characterized by use of very high field NMR spectroscopy at 800 MHz. The combination of the CalphaH proton and (13)Calpha chemical shifts, (3)J(NH)(alpha) coupling constants, NH proton temperature coefficients, and backbone NOEs reveals that the hPTH(1-31)NH(2) peptide has well-formed helical structures localized in two distinct segments of the polypeptide backbone. There are also many characteristic NOEs defining specific side-chain/backbone and side-chain/side-chain contacts within both helical structures. The solution structure of hPTH(1-31)NH(2) contains a short N-terminal helical segment for residues 3-11, including the helix capping residues 3 and 11 and a long C-terminal helix for residues 16-30. The two helical structures are reinforced by well-defined capping motifs and side-chain packing interactions within and at both ends of these helices. On one face of the C-terminal helix, there are side-chain pairs of Glu22-Arg25, Glu22-Lys26, and Arg25-Gln29 that can form ion-pair and/or hydrogen bonding interactions. On the opposite face of this helix, there are characteristic hydrophobic interactions involving the aromatic side chain of Trp23 packing against the aliphatic side chains of Leu15, Leu24, Lys27, and Leu28. There is also a linear array of hydrophobic residues from Val2, to Leu7, to Leu11 and continuing on to residues His14 and Leu15 in the hinge region and to Trp23 in the C-terminal helix. Capping and hydrophobic interactions at the end of the N-terminal and at the beginning of the C-terminal helix appear to consolidate the helical structures into a V-shaped overall conformation for at least the folded population of the hPTH(1-31)NH(2) peptide. Stabilization of well-folded conformations in this linear 1-31 peptide fragment and possibly other analogues of human PTH may have a significant impact on the biological activities of the PTH peptides in general and specifically for the osteogenic/anabolic activities of bone-building PTH analogues.     

Conformational analysis of a potent SSTR3-selective somatostatin analogue by NMR in water solution.

The three-dimensional structure of a potent SSTR3-selective analogue of somatostatin, cyclo(3-14)H-Cys(3)-Phe(6)-Tyr(7)-D-Agl(8)(N(beta) Me, 2-naphthoyl)-Lys(9)-Thr(10)-Phe(11)-Cys(14)-OH (des-AA(1, 2, 4, 5, 12, 13)[Tyr(7), D-Agl(8)(N(beta) Me, 2-naphthoyl)]-SRIF) (peptide 1) has been determined by (1)H NMR in water and molecular dynamics (MD) simulations. The peptide exists in two conformational isomers differing mainly by the cis/trans isomerization of the side chain in residue 8. The structure of 1 is compared with the consensus structural motifs of other somatostatin analogues that bind predominantly to SSTR1, SSTR2/SSTR5 and SSTR4 receptors, and to the 3D structure of a non-selective SRIF analogue, cyclo(3-14)H-Cys(3)-Phe(6)-Tyr(7)-D-2Nal(8)-Lys(9)-Thr(10)-Phe(11)-Cys(14)-OH (des-AA(1, 2, 4, 5, 12, 13)[Tyr(7), D-2Nal(8)]-SRIF) (peptide 2). The structural determinant factors that could explain selectivity of peptide 1 for SSTR3 receptors are discussed.     

The glycine residue in cyclic lactam analogues of galanin(1-16)-NH2 is important for stabilizing an N-terminal helix

The neuropeptide galanin is a 29- or 30-residue peptide whose physiological functions are mediated by G-protein-coupled receptors. Galanin's agonist activity has been shown to be associated with the N-terminal sequence, galanin(1-16). Conformational investigations previously carried out on full-length galanin have, furthermore, indicated the presence of a helical conformation in the neuropeptide's N-terminal domain. Several cyclic lactam analogues of galanin(1-16)-NH2 were prepared in an attempt to stabilize an N-terminal helix in the peptide. Here we describe and compare the solution conformational properties of these analogues in the presence of SDS micelles as determined by NMR, CD, and fluorescence spectroscopy. Differences in CD spectral profiles were observed among the compounds that were studied. Both c[D4, K8]Gal(1-16)-NH2 and c[D4,K8]Gal(1-12)-NH2 adopted stable helical conformations in the micelle solution. On the basis of the analyses of their respective alpha H chemical shifts and NOE patterns, this helix was localized to the first 10 residues. The distance between the aromatic rings of Trp2 and Tyr9 in c[D4, K8]Gal(1-16)-NH2 was determined to be 10.8 +/- 3 A from fluorescence resonance energy transfer measurements. This interchromophore spacing was found to be more consistent with a helical structure than an extended one. Removal of the Gly1 residue in compounds c[D4,K8]Gal(1-16)-NH2 and c[D4, K8]Gal(1-12)-NH2 resulted in a loss of helical conformation and a concomitant reduction in binding potency at the GalR1 receptor but not at the GalR2 receptor. The nuclear Overhauser enhancements obtained for the Gly1 deficient analogues did, however, reveal the presence of nascent helical structures within the N-terminal sequence. Decreasing the ring structure size in c[D4, K8]Gal(1-16)-NH2 by replacing Lys8 with an ornithine residue or by changing the position of the single lysine residue from eight to seven was accompanied by a complete loss of helical structure and dramatically reduced receptor affinity. It is concluded from the data obtained for the series of cyclic galanin(1-16)-NH2 analogues that both the ring structure size and the presence of an N-terminal glycine residue are important for stabilizing an N-terminal helix in these compounds. However, although an N-terminal helix constitutes a predominant portion of the conformational ensemble for compounds c[D4,K8]Gal(1-16)-NH2 and c[D4, K8]Gal(1-12)-NH2, these peptides nevertheless are able to adopt other conformations in solution. Consequently, the correlation between the ability of the cyclic galanin analogues to adopt an N-terminal helix and bind to the GalR1 receptor may be considered as a working hypothesis.     

The 10th and 11th residues of short length N-terminal PTH(1-12) analogue are important for its optimum potency.

The 10th and 11th residues of parathyroid hormone PTH(1-12) analogues were substituted to study the structure and function of PTH analogues. The substitution of Ala(10) of [Ala(3,10,12)(Leu(7)/Phe(7))Arg(11)]rPTH(1-12)NH(2) with Glu(10) and/or the Arg(11) with Ile(11) markedly decreased cAMP generating activity. Data from circular dichroism (CD) and the nuclear magnetic resonance (NMR) structural analysis of [Ala(3,10,12)(Leu(7)/Phe(7))Arg(11)]rPTH(1-12)NH(2) revealed tight alpha-helical structures, while the Glu(10) and/or Ile(11) substituted analogues showed unstable alpha-helical structures. We conclude that 10th and 11th residues are important for stabilizing its helical conformation and that destabilization of the alpha-helical structure, induced by substituting the above residues, remarkably affect its biological potency.     

Monitoring the structural consequences of Phe12-->D-Phe and Leu15-->Aib substitution in human/rat corticotropin releasing hormone. Implications for design of CRH antagonists.

A new human/rat CRH analogue has been synthesized using the Fmoc/tBu solid-phase synthetic protocol. The sequence of the new peptide differs from the original in two positions, 12 and 15, at which the native amino acids l-phenylalanine 12 and l-leucine 15 have been replaced by the nonprotein amino acids d-phenylalanine and alpha-aminoisobutyric acid (Aib), respectively. The high resolution three-dimensional solution structure of [d-Phe12, Aib15]CRH has been determined by 688 distance constraints (656 meaningful NOE and 32 H-bonds distance limits) and 21 angle constraints. A family of 40 energy-minimized conformers was obtained with average rmsd of 0.39 +/- 0.16 A and 0.99 +/- 0.13 A for backbone and heavy atoms, respectively, and distance penalty functions of 0.42 +/- 0.03 A2. The NMR data acquired in a solvent system of water/trifluoroethanol (34%/66%, v/v) revealed that this 41-polypeptide adopts an almost linear helical structure in solution with helical content which reaches an 84% of the residues. Structural analysis confirmed the existence of two helical peptide fragments. The first was comprised of residues Ile6-Arg16 and the second of residues Glu20-Ile40, forming an angle of 34.2 degrees. The structural differences with respect to the native peptide have been identified in the region d-Phe12-Glu20 where double substitution at positions 12 and 15 seems to perturb the elements of the native 35-residue helix. These structural rearrangements promote non-native intramolecular interactions in the region of the molecule between either the hydrophobic side-chains of d-Phe12, Aib15 and Leu18, or the charged groups of the residue pairs Arg16-Glu20 and His13-Glu17 being responsible for changes in hormonal functionality. This CRH analogue currently exhibits lack of any activity.     

Solution structure of Compstatin,a potent complement inhibitor.

The third component of complement, C3, plays a central role in activation of the classical, alternative, and lectin pathways of complement activation. Recently, we have identified a 13-residue cyclic peptide (named Compstatin) that specifically binds to C3 and inhibits complement activation. To investigate the topology and the contribution of each critical residue to the binding of Compstatin to C3, we have now determined the solution structure using 2D NMR techniques; we have also synthesized substitution analogues and used these to study the structure-function relationships involved. Finally, we have generated an ensemble of a family of solution structures of the peptide with a hybrid distance geometry-restrained simulated-annealing methodology, using distance, dihedral angle, and 3J(NH-Halpha)-coupling constant restraints. The Compstatin structure contained a type I beta-turn comprising the segment Gln5-Asp6-Trp7-Gly8. Preference for packing of the hydrophobic side chains of Val3, Val4, and Trp7 was observed. The generated structure was also analyzed for consistency using NMR parameters such as NOE connectivity patterns, 3J(NH-Halpha)-coupling constants, and chemical shifts. Analysis of Ala substitution analogues suggested that Val3, Gln5, Asp6, Trp7, and Gly8 contribute significantly to the inhibitory activity of the peptide. Substitution of Gly8 caused a 100-fold decrease in inhibitory potency. In contrast, substitution of Val4, His9, His10, and Arg11 resulted in minimal change in the activity. These findings indicate that specific side-chain interactions and the beta-turn are critical for preservation of the conformational stability of Compstatin and they might be significant for maintaining the functional activity of Compstatin.     

Conformational solution studies of neuropeptide gamma using CD and NMR spectroscopy.

Neuropeptide gamma is one of the largest members of the tachykinin family of peptides, exhibiting strong agonistic activity towards the NK-2 tachykinin receptor. This peptide was synthesized by the solid-phase method using the Fmoc chemistry. Circular-dichroism spectroscopy (CD) investigations of this peptide were performed in phosphate buffer, in the presence of sodium dodecylsulphate (SDS) micelles and trifluoroethanol (TFE) solutions and in DMSO-d6 using the 2D NMR technique in conjunction with two different theoretical approaches. The first assumes multiconformational equilibrium of the peptide studied characterized by the values of statistical weights of low-energy conformations. These calculations were performed using three different force fields ECEPP/3, AMBER4.1 and CHARMM (implemented in the X-PLOR program). The second method incorporates interproton distance and dihedral angle constraints into the starting conformation using the Simulated Annealing algorithm (X-PLOR program). The CD experiments revealed that although the peptide studied is flexible in polar solvents, a tendency to adopt a helical structure was observed in the hydrophobic environment. The NMR data (NOE effects) indicate a helical or reverse structure in the Ile7-His12 fragment of the peptide studied in DMSO-d6 solution. The results obtained cannot be interpreted in terms of a single conformation. Most of the conformations obtained with the ECEPP/3 force field possess a high content of a helical structure. None of the conformers, obtained with the AMBER4.1 and CHARMM force fields, can be considered as the dominant one. In all conformations several beta-turns were detected and in some cases gamma-turns were also found. But in fact, it is rather difficult to select the position of the secondary element(s) present in the structure of NPgamma in solution. All conformers calculated with the X-PLOR program (with using NMR derived distance and torsion angle constraints) are stabilized by several beta-turns. Common structural motives are a type IV beta-turn in the Gln6-His12 fragment. All conformations obtained using two approaches adopt very similar turn shapes in the middle region of molecule and a random structure on the N- and C-terminal fragments.     

Conformational analysis of the Galpha(s) protein C-terminal region.

The C-terminal domain of the heterotrimeric G protein a-subunits plays a key role in selective activation of G proteins by their cognate receptors. Several C-terminal fragments of Galpha(s) (from 11 to 21 residues) were recently synthesized. The ability of these peptides to stimulate agonist binding was found to be related to their size. Galpha(s)(380-394) is a 15-mer peptide of intermediate length among those synthesized and tested that displays a biological activity surprisingly weak compared with that of the corresponding 21-mer peptide, shown to be the most active. In the present investigation, Galpha(s)(380-394) was subjected to a conformational NMR analysis in a fluorinated isotropic environment. An NMR structure, calculated on the basis of the data derived from conventional 1D and 2D homonuclear experiments, shows that the C-terminal residues of Galpha(s)(380-394) are involved in a helical arrangement whose length is comparable to that of the most active 21 -mer peptide. A comparative structural refinement of the NMR structures of Galpha(s)(380-394) and Galpha(s)(374-394)C379A was performed using molecular dynamics calculations. The results give structural elements to interpret the role played by both the backbone conformation and the side chain arrangement in determining the activity of the G protein C-terminal fragments. The orientation of the side chains allows the peptides to assume contacts crucial for the G protein/receptor interaction. In the 15-mer peptide the lack as well as the disorder of some N-terminal residues could explain the low biological activity observed.     

Distinctive influence of two hexafluoro solvents on the structural stabilization of Bombyx mori silk fibroin protein and its derived peptides: 13C NMR and CD studies

Employing high-resolution (13)C solution NMR and circular dichroism (CD) spectroscopic techniques, the distinctive influence of two intimately related hexafluoro solvents, 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) and hexafluoroacetone trihydrate (HFA), on the structural characteristics of Bombyx mori (B. mori) silk fibroin, the chymotrypsin precipitate (C(p)) fraction, and two synthetic peptides, (AGSGAG)(5) and (AG)(15), is described. The observed (13)C solution NMR and CD spectra of these polypeptides in HFIP and HFA revealed a distinctive influence on their conformational characteristics. The (13)C NMR spectra, as analyzed from the unique chemical shifts of C(alpha) and C(beta) resonances of constituent residues revealed that fibroin largely assumes helical conformation(s) in both solvents. However, the peak shifts were greater for the samples in HFIP, indicating that the types of helical structure(s) may be different from the one populated in HFA. Similar structural tendencies of these polypeptides were reflected in CD spectra. The observed CD patterns, i.e., a strong positive band at approximately 190 nm and negative bands at approximately 206 and 222 nm, have been attributed to the preponderance of helical structures. Of the two prevalent helical structures, alpha-helix and 3(10)-helix, the evidence emerged for the fibroin protein in favor of 3(10)-helical structure stabilization in HFIP and its significant disruption in HFA, as deduced from the characteristic R1 (=[theta](190)/[theta](202)) and R2 (=[theta](222)/[theta](206)) ratios, determined from the CD data. Conversely, the native polypeptides and synthetic peptide fragments derived from highly crystalline regions of the silk fibroin protein sustained predominantly an unordered structure in HFA solvent.     

Studies of peptide antibiotics. XLI. Syntheses of 6-L-valine-tyrocidine A and 7-L-ornithine-tyrocidine A

Tyrocidine A (TA) is an antibiotic cyclic decapeptide with the sequence of cyclo (-L-Val1-L-Orn2-L-Leu3-D-Phe4-L-Pro5-L-Phe6-D-Phe7-L-Asn8-L-Gln9-L-Tyr10-). Gramicidin S (GS) regarded as a homolog of TA is also a cyclic decapeptide with the sequence of cyclo (-L-Val1-L-Orn2-L-Leu3-D-Phe4-L-Pro5-L-Val5-L-Orn7-L-Leu8-D-Phe9-L-Pro10-). GS shows higher antibacterial activity, whereas TA exhibits inhibitory activity on the biosynthesis of RNA. Two analogs of TA, [L-Val6]-TA (12a) and [L-Orn7]-TA (12b), were synthesized by the conventional method in order to study the interrelationships between the two related antibiotics TA and GS. Antibacterial activities of 12a and TA are nearly the same, but the activity of 12b is significantly lower. The optical rotatory dispersion spectra of 12a, 12b, and TA showed a trough at 233 nm region; the troughs of 12a and TA are nearly the same in depth, but the trough of 12b is shallower. Relationships between structure and activity of 12a and 12b compared with TA and GS were discussed.     

NMR structure of human thymosin alpha-1

800 MHz NMR structure of the 28-residue peptide thymosin alpha-1 in 40% TFE/60% water (v/v) has been determined. Restrained molecular dynamic simulations with an explicit solvent box containing 40% TFE/60% TIP3P water (v/v) were used, in order to get the 3D model of the NMR structure. We found that the peptide adopts a structured conformation having two stable regions: an alpha-helix region from residues 14 to 26 and two double β-turns in the N-terminal twelve residues which form a distorted helical structure.     

Helical conformation at the carboxy-terminal portion of human C3a is required for full activity

Human C3a, a 77-residue fragment released during complement activation, is a potent spasmogen that contracts smooth muscle, enhances vascular permeability, and suppresses humoral immune responses. Studies with synthetic peptides have shown that the active site of this anaphylatoxin resides in the COOH-terminal portion of C3a; the minimal peptide structure capable of expressing activity contains residues 73-77, Leu-Gly-Leu-Ala-Arg (C3a-73-77). Longer synthetic C3a analogue peptides, e.g., C3a-57-77 containing the 21 COOH-terminal amino acids, exhibit activity nearly equivalent to that of intact C3a. Circular dichroism spectra of peptide C3a-57-77 in aqueous buffer containing 25% (v/v) trifluoroethanol indicated helical structure (41% helix), and analysis of the sequence suggested an amphipathic surface. We have synthesized several 21-residue peptide analogues of the natural C3a sequence containing residues 57-77 that were designed to enhance helix and to accentuate amphipathy. Syntheses were designed to include strategic placement of the helix-promoting residues 2-aminobutyric acid (beta-methylalanine) and 2-aminoisobutyric acid (alpha-methylalanine). Two 21-residue C3a analogue peptides that were designed to enhance helical content were shown to exhibit greater biological activity than either the native factor C3a or C3a-57-77. Moreover, activity was abrogated by the appropriate placement of helix-breaking residues, e.g., proline, suggesting that a conformational requirement for activity is genuine. These observations suggest that a helical conformation is requisite for optimal C3a activity and that in intact C3a the NH2-terminal portion (residues 1-21) and the disulfide-linked core (residues 22-57) function primarily to stabilize ordered conformation at the COOH-terminal region of the molecule.     

Structure-function relationship studies of bovine parathyroid hormone [bPTH(1-34)] analogues containing alpha-amino-iso-butyric acid (Aib) residues

The N-terminal 1-34 fragments of the parathyroid hormone (PTH) and parathyroid hormone-related protein (PTHrP) elicit the full spectrum of bone-related biological activities of the intact native sequences. It has been suggested that the structural elements essential for bioactivity are two helical segments located at the N-terminal and C-terminal sequences, connected by hinges or flexible points around positions 12 and 19. In order to assess the relevance of the local conformation around Gly(12) upon biological function, we synthesized and characterized the following PTH(1-34) analogues containing Aib residues: (I) A-V-S-E-I-Q-F-nL-H-N-Aib-G-K-H-L-S-S-nL-E-R-V-E-Nal-L-R-K-K-L-Q-D-V-H-N-Y-NH(2) ([Nle(8,18), Aib(11), Nal(23),Tyr(34)]bPTH(1-34)-NH(2)); (II) A-V-S-E-I-Q-F-nL-H-N-L-Aib-K-H-L-S-S-nL-E-R-V-E-Nal-L-R-K-K-L-Q-D-V-H-N-Y-NH(2) ([Nle(8,18), Aib(12),Nal(23),Tyr(34)]bPTH(1-34)-NH(2)); (III) A-V-S-E-I-Q-F-nL-H-N-L-G-Aib-H-L-S-S-nL-E-R-V-E-Nal-L-R-K-K-L-Q-D-V-H-N-Y-NH(2) ([Nle(8,18), Aib(13), Nal(23),Tyr(34)]bPTH(1-34)-NH(2)); (IV) A-V-S-E-I-Q-F-nL-H-N-Aib-Aib-K-H-L-S-S-nL-E-R-V-E-Nal-L-R-K-K-L-Q-D-V-H-N-YNH(2) ([Nle(8,18), Aib(11,12), Nal(23),Tyr(34)]bPTH(1-34)-NH(2)); (V) A-V-S-E-I-Q-F-nL-H-N-L-Aib-Aib-H-L-S-S-nL-E-R-V-E-Nal-L-R-K-K-L-Q-D-V-H-N-Y-NH(2) ([Nle(8,18), Aib(12,13),Nal(23),Tyr(34)]bPTH(1-34)-NH(2)). (nL= Nle; Nal= L-(2-naphthyl)-alanine; Aib= alpha-amino-isobutyric acid.) The introduction of Aib residues at position 11 in analogue I or at positions 11 and 12 in analogue IV resulted in a 5-20-fold lower efficacy and a substantial loss of binding affinity compared to the parent compound [Nle(8,18), Nal(23),Tyr(34)]bPTH(1-34)-NH(2). Both binding affinity and adenylyl cyclase stimulation activity are largely restored when the Aib residues are introduced at position 12 in analogue II, 13 in analogue III, and 12-13 in analogue V. The conformational properties of the analogues in aqueous solution containing dodecylphosphocholine micelles were studied by CD, two-dimensional (2D) NMR and computer simulations. The results indicated the presence of two helical segments in all analogues, located at the N-terminal and C-terminal sequences. Insertion of Aib residues at positions 12 and 13, or of Aib dyads at positions 11-12 and 12-13, enhances the stability of the N-terminal helix of all analogues. In all analogues the Aib residues are included in the helical segments. These results confirmed the importance of the helical structure in the N-terminal activation domain, as well as of the presence of the Leu(11) hydrophobic side chain in the native sequence, for PTH-like bioactivity.     

The structural basis of compstatin activity examined by structure-function-based design of peptide analogs and NMR

We have previously identified compstatin, a 13-residue cyclic peptide, that inhibits complement activation by binding to C3 and preventing C3 cleavage to C3a and C3b. The structure of compstatin consists of a disulfide bridge and a type I beta-turn located at opposite sides to each other. The disulfide bridge is part of a hydrophobic cluster, and the beta-turn is part of a polar surface. We present the design of compstatin analogs in which we have introduced a series of perturbations in key structural elements of their parent peptide, compstatin. We have examined the consistency of the structures of the designed analogs compared with compstatin using NMR, and we have used the resulting structural information to make structure-complement inhibitory activity correlations. We propose the following. 1) Even in the absence of the disulfide bridge, a linear analog has a propensity for structure formation consistent with a turn of a 3(10)-helix or a beta-turn. 2) The type I beta-turn is a necessary but not a sufficient condition for activity. 3) Our substitutions outside the type I beta-turn of compstatin have altered the turn population but not the turn structure. 4) Flexibility of the beta-turn is essential for activity. 5) The type I beta-turn introduces reversibility and sufficiently separates the two sides of the peptide, whereas the disulfide bridge prevents the termini from drifting apart, thus aiding in the formation of the hydrophobic cluster. 6) The hydrophobic cluster at the linked termini is involved in binding to C3 and activity but alone is not sufficient for activity. 7) beta-Turn residues Gln(5) (Asn(5))-Asp(6)-Trp(7)(Phe(7))-Gly(8) are specific for the turn formation, but only Gln(5)(Asn(5))-Asp(6)-Trp(7)-Gly(8) residues are specific for activity. 8) Trp(7) is likely to be involved in direct interaction with C3, possibly through the formation of a hydrogen bond. Finally we propose a binding model for the C3-compstatin complex.     

Association of a model class A (apolipoprotein) amphipathic alpha helical peptide with lipid: high resolution NMR studies of peptide.lipid discoidal complexes

Class A amphipathic helical peptides have been shown to mimic apolipoprotein A-I, the major protein component of high density lipoproteins and have been shown to inhibit atherosclerosis in several dyslipidemic mouse models. Previously we reported the NMR structure of Ac-18A-NH2, the base-line model class A amphipathic helical peptide in a 50% (v/v) trifluoroethanol-d3/water mixture, a membrane-mimic environment (Mishra, V. K., Palgunachari, M. N., Anantharamaiah, G. M., Jones, M. K., Segrest, J. P., and Krishna, N. R. (2001) Peptides 22, 567-573). The peptide Ac-18A-NH2 forms discoidal nascent high density lipoprotein-like particles with 1,2-dimyristoyl-sn-glycero-3-phosphocholine. Because subtle structural changes in the peptide.lipid complexes have been shown to be responsible for their antiatherogenic properties, we undertook high resolution NMR studies to deduce detailed structure of recombinant peptide.1,2-dimyristoyl-sn-glycero-3-phosphocholine complexes. The peptide adopts a well defined amphipathic alpha helical structure in association with the lipid at a 1:1 peptide:lipid weight ratio. Nuclear Overhauser effect spectroscopy revealed a number of intermolecular close contacts between the aromatic residues in the hydrophobic face of the helix and the lipid acyl chain protons. The pattern of observed peptide-lipid nuclear Overhauser effects is consistent with a parallel orientation of the amphipathic alpha helix, with respect to the plane of the lipid bilayer, on the edge of the disc (the belt model). Based on the results of chemical cross-linking and molecular modeling, we propose that peptide helices are arranged in a head to tail fashion to cover the edge of the disc. This arrangement of peptides is also consistent with the pKa values of the Lys residues determined previously. Taken together, these results provide for the first time a high resolution structural view of the peptide.lipid discoidal complexes formed by a class A amphipathic alpha helical peptide.     

Helical structure of dermaseptin B2 in a membrane-mimetic environment

Dermaseptins are antimicrobial peptides from frog skin that have high membrane-lytic activity against a broad spectrum of microorganisms. The structure of dermaseptin B2 in aqueous solution, in TFE/water mixtures, and in micellar and nonmicellar SDS was analyzed by CD, FTIR, fluorescence, and NMR spectroscopy combined with molecular dynamics calculations. Dermaseptin B2 is unstructured in water, but helical conformations, mostly in segment 3-18, are stabilized by addition of TFE. SDS titration showed that dermaseptin B2 assumes nonhelical structures at SDS concentrations far below the critical micellar concentration and helical structures at micellar concentrations. Dermaseptin B2 bound to SDS micelles (0.4 mM peptide, 80 mM SDS) adopts a well-defined amphipathic helix between residues 11-31 connected to a more flexible helical segment spanning residues 1-8 by a flexible hinge region around Val9 and Gly10. Experiments using paramagnetic probes showed that dermaseptin B2 lies near the surface of SDS micelles and that residue Trp3 is buried in the SDS micelle, but close to the surface. A slow exchange equilibrium occurs at higher peptide/SDS ratios (2 mM peptide, 80 mM SDS) between forms having distinct sets of resonances in the N-terminal 1-11 segment. This equilibrium could reflect different oligomeric states of dermaseptin B2 interacting with SDS micelles. Structure-activity studies on dermaseptin B2 analogues showed that the N-terminal 1-11 segment is an absolute requirement for antibacterial activity, while the C-terminal 10-33 region is also important for full antibiotic activity.     

NMR solution structure of the glucagon antagonist [desHis1, desPhe6, Glu9]glucagon amide in the presence of perdeuterated dodecylphosphocholine micelles

Glucagon, a 29-residue peptide hormone, plays an important role in glucose homeostasis and in diabetes mellitus. Several glucagon antagonists and agonists have been developed, but limited structural information is available to clarify the basis of their biological activity. The solution structure of the potent glucagon antagonist, [desHis1, desPhe6, Glu9]glucagon amide, was determined by homonuclear 2D NMR spectroscopy at pH 6.0 and 37 degrees C in perdeuterated dodecylphosphocholine micelles. The overall backbone root-mean-square deviation (rmsd) for the structured portion (residues 7-29, glucagon numbering) of the micelle-bound 27-residue peptide is 1.36 A for the 15 lowest-energy structures, after restrained molecular dynamics simulation. The structure consists of four regions (segment backbone rmsd in A): an unstructured N-terminal segment between residues 2 and 5 (1.68), an irregular helix between residues 7 and 14 (0.79), a hinge region between residues 15 and 18 (0.54), and a well-defined alpha-helix between residues 19 and 29 (0.33). The two helices form an L-shaped structure with an angle of about 90 degrees between the helix axes. There is an extended hydrophobic cluster, which runs along the inner surface of the L-structure and incorporates the side chains of the hydrophobic residues of each of the amphipathic helices. The outer surface contains the hydrophilic side chains, with two salt bridges (D15-R18 and R17-D21) implied from close approach of the charged groups. This result is the first clear indication of an overall tertiary fold for a glucagon analogue in the micelle-bound state. The relationship of the two helical structural elements may have important implications for the biological activity of the glucagon antagonist.     

Disruption Mechanism in the Helix of SPF Peptide by Interchanging E5 and K10 Residues: Inference from Molecular Dynamics Study

Abstract

Seminalplasmin (SPLN) is a 47-residue peptide (SDEKASPDKHHRFSLSRYAKLANR LANPKLLETFLSKWIGDRGNRSV) from bovine seminal plasma. It has broad spectrum antimicrobial activity, without any hemolytic activity. The 28–40 segment of SPLN with the sequence PKLLETFLSKWIG, designated as SPF, is the most hydrophobic stretch of SPLN and primarily responsible for the membrane-perturbing activity of SPLN. It was reported that SPF has a helical structure and the interchange of E5 and K10 residues disrupted the helical structure. The present paper reports a possible mechanism of disruption of the helical structure of SPF peptide during the interchange of E5 and K10 residues. The result is based on simulated annealing and molecular dynamics simulation studies on SPF and its four analogues with K10E, K10D, E5K, and E5K & K10E substitutions. It showed that K10 residue has a critical role in maintaining the highest helical content and the positions of charged residues are also very important for maintaining the helical structure of the SPF peptide. Formation of some new long-range hydrogen bonds and the rupture of some shortrange hydrogen bonds involving the tenth residue led to the disruption of helical structure of SPF peptide when E5 and K10 residues are interchanged.     

Solution structure of pardaxin P-2

Pardaxin is a mucosal secretion of the Pacific sole Pardachirus pavoninus that exhibits unusual shark repellent and surfactant properties [Thompson, S. A., Tachibana, K., Nakanishi, K., & Kubota, I. (1986) Science 233, 341-343]. This 33 amino acid polypeptide folds into ordered structures in trifluoroethanol-water solution and in micelles but adopts a random-coiled structure in water solution. The complete proton NMR spectrum of pardaxin P-2 has been assigned in CF3CD2OD/H2O (1:1) solution, and the three-dimensional structure has been elucidated with distance restrained molecular dynamics calculations. It is demonstrated that peptide segments within the 7-11 and 14-26 residue stretches are helical while residues at the C- and N-terminus exist predominantly in extended conformations in solution. The dipeptide 12-13 segment connecting the two helices exists as a bend or a hinge allowing the two helices to be oriented in a L-shaped configuration. These studies establish that pardaxin P-2 adopts a novel amphiphilic helix (7-11)-bend (12-13)-helix (14-26) motif with Pro-13 forming the focal point of the turn or bend between the two helices.