Membrane interactions and metal ion effects on bilayer permeation of the lipophilic ion modulator DP-109

DP-109, a lipophilic bivalent metal ion modulator currently under preclinical development for neurodegenerative disorders, was designed to have membrane-associated activity, thereby restricting its action to the vicinity of cell membranes. We describe the application of a colorimetric phospholipid/polydiacetylene (PDA) biomimetic membrane assay in elucidating DP-109 membrane interactions and penetration into lipid bilayers. In this membrane model, visible quantifiable color changes were monitored in studying membrane interactions. The colorimetric data identified a biphasic concentration-dependent interaction, with a break point around the critical micelle concentration (CMC) of DP-109. The kinetics and colorimetric dose-response profile of DP-109 indicate that the compound inserts into the lipid bilayers rather than being localized at the bilayer surface. Analysis of interactions of DP-109 with phospholipid/PDA vesicles in which ionic gradients were imposed indicates that membrane activity of DP-109 is strongly affected by electrochemical gradients imposed by K+ and Zn2+. The ionic gradient effects suggest that the insertion of DP-109 into the membrane may depend on the membrane potential.     

Pardaxin, a fish toxin peptide interaction with a biomimetic phospholipid/polydiacetylene membrane assay

Pardaxin is a fish toxin belonging to the alpha-helical, pore-forming peptide family, used in toxicological and biophysical research to study toxin-cell and -lipid-artificial membranes interactions. We investigated the membrane interaction of two pardaxin analogues using a colorimetric phospholipid/polydiacetylene biomimetic assay. In this assay, polydiacetylene undergoes visible, concentration dependent, blue-red transformation induced through interactions of pardaxins with the vesicle membrane. Pardaxins P4 and P5, are composed of 33 amino acids, but differ in a single amino acid substitution at the carboxy-terminal (G(31) to D(31), respectively) known to decrease the pore forming activity. Addition of pardaxins in the colorimetric assay induced dose-dependent color transitions with different kinetics. The colorimetric analysis could distinguish between different pardaxins-membrane interaction profiles, suggesting bilayer surface association for P4 and vesicle membrane penetration for P5. The colorimetric assay could distinguish between pardaxins membrane interaction profiles although circular dichroism spectra of vesicle-interacting pardaxins did not indicate a significant difference in the secondary structure between these two toxin analogues. The colorimetric platform utilized in the present report represents a useful assay with general applications for studying membrane interactions of peptides in general and pore-forming toxins in particular, and may become an important tool for evaluating quantitative toxin structure-activity relationship.     

A colorimetric assay for rapid screening of antimicrobial peptides

The increased resistance of various bacteria toward available antibiotic drugs has initiated intensive research efforts into identifying new sources of antimicrobial substances. Short antibiotic peptides (10-30 residues) are prevalent in nature as part of the intrinsic defense mechanisms of most organisms and have been proposed as a blueprint for the design of novel antimicrobial agents. Antimicrobial peptides are generally believed to kill bacteria through membrane permeabilization and extensive pore-formation. Assays providing rapid and easy evaluation of interactions between antimicrobial membrane peptides and lipid bilayers could significantly improve screening for substances with effective antibacterial properties, as well as contribute to the elucidation of structural and functional properties of antimicrobial peptides. Here we describe a colorimetric sensor in which particles composed of phospholipids and polymerized polydiacetylene (PDA) lipids were shown to exhibit striking color changes upon interactions with antimicrobial membrane peptides. The color changes in the system occur because of the structural perturbation of the lipids following their interactions with antimicrobial peptides. The assay was also sensitive to the antibacterial properties of structurally and functionally related peptide analogs.     

Detection and analysis of membrane interactions by a biomimetic colorimetric lipid/polydiacetylene assay

We describe applications of a colorimetric assay based on supramolecular assemblies of lipid-polydiacetylene vesicles for analysis and screening of membrane interactions of lipophilic enzymes, peptides, and ions and for study of the effects of lipid composition upon membrane properties. The lipid-polymer aggregates undergo visible and quantifiable blue-to-red transitions following interfacial interactions and perturbation by varied biochemical processes. Specifically, we show that the colorimetric assay can be tuned for selective detection of enzymes reacting with different lipid species. The experiments also demonstrate that the lipid/polymer platform facilitates screening of peptide-membrane interactions in multicomponent mixtures. The colorimetric vesicles can incorporate lipid species from different cellular sources facilitating analysis of the contribution of molecular components to membrane properties and lipid interactions.     

Polymerized lipid vesicles as colorimetric biosensors for biotechnological applications

Supramolecular chemical assemblies composed of polydiacetylene (PDA) exhibit rapid colorimetric transitions upon specific interactions with a variety of biological analytes in aqueous solutions. Among the analytes that give rise to the unique blue-red color changes are lipophilic enzymes, antibacterial peptides, ions, antibodies, and membrane penetration enhancers. The chemical assemblies include conjugated PDA, responsible for the chromatic transitions, and the molecular recognition elements, which are either chemically or physically associated with the PDA. Thus, by incorporation of specific recognition elements, the system can be designed in ways allowing for highly selective identification of analytes. In particular, receptors and epitopes can be incorporated within the sensor assembly, which then determine the specificity of the colorimetric transitions. The PDA-based molecular assemblies are robust and can be readily applied to diagnosis of physiological molecules and for rapid screening of chemical and biological libraries, for example, in 96 well-plate platforms.     

Structures and mode of membrane interaction of a short alpha helical lytic peptide and its diastereomer determined by NMR, FTIR, and fluorescence spectroscopy.

The interaction of many lytic cationic antimicrobial peptides with their target cells involves electrostatic interactions, hydrophobic effects, and the formation of amphipathic secondary structures, such as alpha helices or beta sheets. We have shown in previous studies that incorporating approximately 30%d-amino acids into a short alpha helical lytic peptide composed of leucine and lysine preserved the antimicrobial activity of the parent peptide, while the hemolytic activity was abolished. However, the mechanisms underlying the unique structural features induced by incorporating d-amino acids that enable short diastereomeric antimicrobial peptides to preserve membrane binding and lytic capabilities remain unknown. In this study, we analyze in detail the structures of a model amphipathic alpha helical cytolytic peptide KLLLKWLL KLLK-NH2 and its diastereomeric analog and their interactions with zwitterionic and negatively charged membranes. Calculations based on high-resolution NMR experiments in dodecylphosphocholine (DPCho) and sodium dodecyl sulfate (SDS) micelles yield three-dimensional structures of both peptides. Structural analysis reveals that the peptides have an amphipathic organization within both membranes. Specifically, the alpha helical structure of the L-type peptide causes orientation of the hydrophobic and polar amino acids onto separate surfaces, allowing interactions with both the hydrophobic core of the membrane and the polar head group region. Significantly, despite the absence of helical structures, the diastereomer peptide analog exhibits similar segregation between the polar and hydrophobic surfaces. Further insight into the membrane-binding properties of the peptides and their depth of penetration into the lipid bilayer has been obtained through tryptophan quenching experiments using brominated phospholipids and the recently developed lipid/polydiacetylene (PDA) colorimetric assay. The combined NMR, FTIR, fluorescence, and colorimetric studies shed light on the importance of segregation between the positive charges and the hydrophobic moieties on opposite surfaces within the peptides for facilitating membrane binding and disruption, compared to the formation of alpha helical or beta sheet structures.     

Membrane binding and permeation by indolicidin analogs studied by a biomimetic lipid/polydiacetylene vesicle assay

Membrane binding and relative penetration of indolicidin analogs were studied using lipid/polydiacetylene (PDA) chromatic biomimetic membranes. Colorimetric and fluorescence analyses determined that an indolicidin analog with a proline and tryptophan residue substituted with lysines showed more pronounced bilayer surface interactions, while indolicidin and particularly an indolicidin analog in which all prolines were replaced with alanine residues exhibited deeper insertion into the lipid bilayer. The colorimetric data demonstrated that more pronounced blue-red transitions were observed when the chromatic vesicles incorporated lipopolysaccharide (LPS) within the lipid bilayer, indicating that LPS promoted preferred binding and incorporation of the peptides at the lipid/water interface. The fluorescence quenching experiments further confirmed this outcome. The results indicate that the antibacterial activity of indolicidin most likely requires initial binding to the LPS moieties within bacterial membranes, as well as disruption of the bilayer interface. The degree of hemolysis induced by the analogs, on the other hand, correlated to the extent of penetration into the hydrophobic core of the lipid assembly.     

Biomimetic lipid/polymer colorimetric membranes: molecular and cooperative properties

Characterization of membranes and of biological processes occurring within membranes is essential for understanding fundamental cellular behavior. Here we present a detailed biophysical study of a recently developed colorimetric biomimetic membrane assembly constructed from physiological lipid molecules and conjugated polydiacetylene. Various analytical techniques have been applied to characterize the organization of the lipid components in the chromatic vesicles and their contributions to the observed blue-to-red color transitions. Experiments reveal that both the polymerized units as well as the lipids exhibit microscopic phases and form domains whose properties and bilayer organization are interdependent. These domains are interspersed within mixed lipid/polymer vesicles that have a size distribution different from those of aggregates of the individual molecular constituents. The finding that fluidity changes induced within the lipid domains are correlated with the chromatic transitions demonstrates that the colorimetric platform can be used to evaluate the effects of individual molecular components, such as negatively charged lipids and cholesterol, upon membrane fluidity and thermal stability.     

The human islet amyloid polypeptide forms transient membrane-active prefibrillar assemblies

The formation of amyloid fibrils by the human islet amyloid polypeptide is associated with type II diabetes. While it was previously suggested that the formed fibrils are toxic to pancreatic beta-cells due to membrane permeation activity, more recent studies suggested that protofibrillar assemblies have significantly higher potency in permeating lipid bilayers. Here, we specifically studied the membrane interaction activity of soluble and insoluble islet amyloid polypeptide assemblies at high temporal resolution. A colorimetric analysis using lipid/polydiacetylene (PDA) biomimetic vesicles clearly demonstrated the transient formation of soluble assemblies that strongly interact with the lipid vesicles. A peak in the level of membrane binding of the soluble fraction, as reflected by the colorimetric assay, was observed after incubation for approximately 1 h, followed by a decrease in the level of membrane interaction of the assemblies. The transient nature of the membrane-active assemblies was independently confirmed by a fluorescence quenching assay. Ultrastructural analysis using transmission electron microscopy provided morphological evidence of prefibrillar assemblies, supported the transient existence of membrane interacting soluble species, and facilitated observation of the non-membrane-active filaments in the solution. Taken together, our results provide experimental evidence for the formation of transient soluble prefibrillar assemblies which are highly membrane-active. The implications of these observations are discussed in light of designed fibrillization inhibitors.     

Electrostatic binding of proteins to membranes. Theoretical predictions and experimental results with charybdotoxin and phospholipid vesicles.

We previously applied the Poisson-Boltzmann equation to atomic models of phospholipid bilayers and basic peptides to calculate their electrostatic interactions from first principles (Ben-Tal, N., B. Honig, R. M. Peitzsch, G. Denisov, and S. McLaughlan. 1996. Binding of small basic peptides to membranes containing acidic lipids. Theoretical models and experimental results. Biophys. J. 71:561-575). Specifically, we calculated the molar partition coefficient, K (the reciprocal of the lipid concentration at which 1/2 the peptide is bound), of simple basic peptides (e.g., pentalysine) with phospholipid vesicles. The theoretical predictions agreed well with experimental measurements of the binding, but the agreement could have been fortuitous because the structure(s) of these flexible peptides is not known. Here we use the same theoretical approach to calculate the membrane binding of two small proteins of known structure: charybdotoxin (CTx) and iberiotoxin (IbTx); we also measure the binding of these proteins to phospholipid vesicles. The theoretical model describes accurately the dependence of K on the ionic strength and mol % acidic lipid in the membrane for both CTx (net charge +4) and IbTx (net charge +2). For example, the theory correctly predicts that the value of K for the binding of CTx to a membrane containing 33% acidic lipid should decrease by a factor of 10(5) when the salt concentration increases from 10 to 200 mM. We discuss the limitations of the theoretical approach and also consider a simple extension of the theory that incorporates nonpolar interactions.     

Polydiacetylene (PDA)-based colorimetric detection of biotin-streptavidin interactions

The natural binding of streptavidin (STA) for a small molecule, biotin, has made it a useful tool in specific targeting application, due to their most specific noncovalent biological interactions in nature. Here, we describe a polydiacetylene (PDA)-based colorimetric biosensor to detect the STA-biotin interactions. We synthesized two kinds of biotin-labeled 10,12-pentacosadiynoic acid (PCDA) monomers having 2(ethylene oxide) or 3(ethylene oxide) spacer and prepared biotin-modified PDA liposomes using them. Upon the addition of STA, the modified PDA liposomes showed a color change from blue to red in about 1h followed by their aggregation and precipitation. The aggregation was found to be due to the cross-linking between the PDA liposomes caused by the STA having four biotin binding sites, which was confirmed by their TEM analysis. Since the STA-biotin interactions are widely adopted for various biological detection systems; the biotin-modified PDA sensor developed in this study has enormous potentials for the development of various colorimetric biosensors.     

Parameters modulating the maximum insertion pressure of proteins and peptides in lipid monolayers

The lipid monolayer model membrane is useful for studying the parameters responsible for protein and peptide membrane binding. Different approaches have been used to determine the extent of protein and peptide binding to lipid monolayers. This review focuses on the use of the “maximum insertion pressure” (MIP) to estimate the extent of protein and peptide penetration in lipid monolayers. The MIP data obtained with different proteins and peptides have been reviewed and discussed which allowed to draw conclusions on the parameters modulating the monolayer binding of proteins and peptides. In particular, secondary structure components such as amphipathic α-helices of proteins and peptides as well as electrostatic interactions play important roles in monolayer binding. The MIPs have been compared to the estimated lateral pressure of biomembranes which allowed to evaluate the possible association between proteins or peptides with natural membranes. For example, the MIP of a membrane-anchored protein with a glycosylphosphatidylinositol (GPI) was found to be far below the estimated lateral pressure of biomembranes. This allowed us to conclude that this protein is probably unable to penetrate the membrane and should thus be hanged at the membrane surface by use of its GPI lipid anchor. Moreover, the values of MIP obtained with myristoylated and non-myristoylated forms of calcineurin suggest that the myristoyl group does not contribute to monolayer binding. However, the acylation of a peptide resulted in a large increase of MIP. Finally, the physical state of lipid monolayers can have a strong effect on the values of MIP such that it is preferable to perform measurements with lipids showing a single physical state. Altogether the data show that the measurement of the maximum insertion pressure provides very useful information on the membrane binding properties of proteins and peptides although uncertainties must be provided to make sure the observed differences are significant.     

A quantitative method for the measurement of membrane affinity by polydiacetylene-based colorimetric assay

The measurement of membrane affinity is an important early screening step during drug discovery. However, classical methods for membrane affinity measurement are tedious and difficult to implement in high-throughput screening. This article describes a quantitative method for the measurement of membrane affinity by colorimetric assay based on polydiacetylene (PDA) sensors. Prepared lipid/PDA chromatic vesicles were used to model cell membranes. By measuring the colorimetric response of the chromatic vesicles when drug-membrane interactions occurred, membrane affinity constant K(b) could be calculated using a simple quantitative model. Under optimized preparation conditions, the calculated log(K(b)) values exhibited an in-batch relative standard deviation (RSD) of less than 4% and a between-batch RSD of less than 8% for all three reference compounds. The logarithm of K(b) of the six β-blockers exhibited excellent linear correlation with the logarithm of the liposome/water partition coefficient (K(m)) with R(2)=0.9793. For neutral compounds, the log(K(b)) of n-fatty alcohols correlated with the logarithm of the n-octanol/water partition coefficient (K(oct)) with a linear correlation coefficient R(2)=0.9833. This work provides a simple, convenient, and reproducible method for the rapid measurement of membrane affinity and presents important implications for high-throughput screening.     

Using fluorine nuclear magnetic resonance to probe changes in the structure and dynamics of membrane-active peptides interacting with lipid bilayers

The antimicrobial peptide MSI-78 serves as a model system for studying interactions of bioactive peptides with membranes. Using a series of MSI-78 peptides that incorporate l-4,4,4-trifluoroethylglycine, a small and sensitive (19)F nuclear magnetic resonance probe, we investigated how the local structure and dynamics of the peptide change when it binds to the lipid bilayer. The fluorinated MSI-78 analogues exhibited position-specific changes in (19)F chemical shift ranging from 1.28 to -1.35 ppm upon binding to lipid bicelles. The largest upfield shifts are associated with the most hydrophobic positions in the peptide. Changes in solvent isotope effects (H(2)O/D(2)O) on (19)F chemical shifts were observed for the peptides that are consistent with the MSI-78 solvent-inaccessible hydrophobic core upon binding bicelles. Transverse relaxation measurements of the (19)F nucleus, using the Carr-Purcell-Meiboom-Gill pulse sequence, were used to examine changes in the local mobility of MSI-78 that occur upon binding to the lipid bilayer. Positions in the hydrophobic core of peptide-membrane complex show the greatest decrease in mobility upon binding of the lipid bilayer, whereas residues that interact with lipid headgroups are more mobile. The most mobile positions are at the N- and C-termini of the peptide. These results provide support for the proposed mechanism of membrane disruption by MSI-78 and reveal new details about the dynamic changes that accompany membrane binding.     

Simulation studies of the interaction of antimicrobial peptides and lipid bilayers

Experimental studies of a number of antimicrobial peptides are sufficiently detailed to allow computer simulations to make a significant contribution to understanding their mechanisms of action at an atomic level. In this review we focus on simulation studies of alamethicin, melittin, dermaseptin and related antimicrobial, membrane-active peptides. All of these peptides form amphipathic alpha-helices. Simulations allow us to explore the interactions of such peptides with lipid bilayers, and to understand the effects of such interactions on the conformational dynamics of the peptides. Mean field methods employ an empirical energy function, such as a simple hydrophobicity potential, to provide an approximation to the membrane. Mean field approaches allow us to predict the optimal orientation of a peptide helix relative to a bilayer. Molecular dynamics simulations that include an atomistic model of the bilayer and surrounding solvent provide a more detailed insight into peptide-bilayer interactions. In the case of alamethicin, all-atom simulations have allowed us to explore several steps along the route from binding to the membrane surface to formation of transbilayer ion channels. For those antimicrobial peptides such as dermaseptin which prefer to remain at the surface of a bilayer, molecular dynamics simulations allow us to explore the favourable interactions between the peptide helix sidechains and the phospholipid headgroups.     

Adhesion and merging of lipid bilayers: a method for measuring the free energy of adhesion and hemifusion

Lipid bilayers can be induced to adhere to each other by molecular mediators, and, depending on the lipid composition, such adhesion can lead to merging of the contacting monolayers in a process known as hemifusion. Such bilayer-bilayer reactions have never been systematically studied. In the course of our studies of membrane-active molecules, we encountered such reactions. We believe that they need to be understood whenever bilayer-bilayer interactions take place, such as during membrane fusion. For illustration, we discuss three examples: spontaneous adhesion between phospholipid bilayers induced by low pH, polymer-induced osmotic depletion attraction between lipid bilayers, and anionic lipid bilayers cross-bridged by multicationic peptides. Our purpose here is to describe a general method for studying such interactions. We used giant unilamellar vesicles, each of which was aspirated in a micropipette so that we could monitor the tension of the membrane and the membrane area changes during the bilayer-bilayer interaction. We devised a general method for measuring the free energy of adhesion or hemifusion. The results show that the energies of adhesion or hemifusion of lipid bilayers could vary over 2 orders of magnitude from −1 to −50 × 10⁻⁵ J/m² in these examples alone. Our method can be used to measure the energy of transition in each step of lipid transformation during membrane fusion. This is relevant for current research on membrane fusion, which focuses on how fusion proteins induce lipid transformations.     

Peptide-membrane interactions and mechanisms of membrane destruction by amphipathic α-helical antimicrobial peptides

Antimicrobial peptides (AMPs) have received considerable interest as a source of new antibiotics with the potential for treatment of multiple-drug resistant infections. An important class of AMPs is composed of linear, cationic peptides that form amphipathic α-helices. Among the most potent of these are the cecropins and synthetic peptides that are hybrids of cecropin and the bee venom peptide, mellitin. Both cecropins and cecropin-mellitin hybrids exist in solution as unstructured monomers, folding into predominantly α-helical structures upon membrane binding with their long helical axis parallel to the bilayer surface. Studies using model membranes have shown that these peptides intercalate into the lipid bilayer just below the level of the phospholipid glycerol backbone in a location that requires expansion of the outer leaflet of the bilayer, and evidence from a variety of experimental approaches indicates that expansion and thinning of the bilayer are common characteristics during the early stages of antimicrobial peptide-membrane interactions. Subsequent disruption of the membrane permeability barrier may occur by a variety of mechanisms, leading ultimately to loss of cytoplasmic membrane integrity and cell death.     

Detection of liposomal cholesterol and monophosphoryl lipid A by QS-21 saponin and Limulus polyphemus amebocyte lysate

Liposomes containing cholesterol (Chol) have long been used as an important membrane system for modeling the complex interactions of Chol with adjacent phospholipids or other lipids in a membrane environment. In this study we utilize a probe composed of QS-21, a saponin molecule that recognizes liposomal Chol and causes hemolysis of erythrocytes. The interaction of QS-21 with liposomal Chol results in a stable formulation which, after injection into the tissues of an animal, lacks toxic effects of QS-21 on neighboring cells that contain Chol, such as erythrocytes. Here we have used liposomes containing different saturated phospholipid fatty acyl groups and Chol, with or without monophosphoryl lipid A (MPLA), as model membranes. QS-21 is then employed as a probe to study the interactions of liposomal lipids on the visibility of membrane Chol. We demonstrate that changes either in the mole fraction of Chol in liposomes, or with different chain lengths of phospholipid fatty acyl groups, can have a substantial impact on the detection of Chol by the QS-21. We further show that liposomal MPLA can partially inhibit detection of the liposomal Chol by QS-21. The Limulus amebocyte lysate assay is used for binding to and detection of MPLA. Previous work has demonstrated that sequestration of MPLA into the liposomal lipid bilayer can block detection by the Limulus assay, but the binding site on the MPLA to which the Limulus protein binds is unknown. Changes in liposomal Chol concentration and phospholipid fatty acyl chain length influenced the detection of the liposome-embedded MPLA.     

Peptide-membrane interactions and mechanisms of membrane destruction by amphipathic alpha-helical antimicrobial peptides

Antimicrobial peptides (AMPs) have received considerable interest as a source of new antibiotics with the potential for treatment of multiple-drug resistant infections. An important class of AMPs is composed of linear, cationic peptides that form amphipathic alpha-helices. Among the most potent of these are the cecropins and synthetic peptides that are hybrids of cecropin and the bee venom peptide, mellitin. Both cecropins and cecropin-mellitin hybrids exist in solution as unstructured monomers, folding into predominantly alpha-helical structures upon membrane binding with their long helical axis parallel to the bilayer surface. Studies using model membranes have shown that these peptides intercalate into the lipid bilayer just below the level of the phospholipid glycerol backbone in a location that requires expansion of the outer leaflet of the bilayer, and evidence from a variety of experimental approaches indicates that expansion and thinning of the bilayer are common characteristics during the early stages of antimicrobial peptide-membrane interactions. Subsequent disruption of the membrane permeability barrier may occur by a variety of mechanisms, leading ultimately to loss of cytoplasmic membrane integrity and cell death.     

Mechanical properties of lipid bilayers and regulation of mechanosensitive function

Material properties of lipid bilayers, including thickness, intrinsic curvature and compressibility regulate the function of mechanosensitive (MS) channels. This regulation is dependent on phospholipid composition, lateral packing and organization within the membrane. Therefore, a more complete framework to understand the functioning of MS channels requires insights into bilayer structure, thermodynamics and phospholipid structure, as well as lipid-protein interactions. Phospholipids and MS channels interact with each other mainly through electrostatic forces and hydrophobic matching, which are also crucial for antimicrobial peptides. They are excellent models for studying the formation and stabilization of membrane pores. Importantly, they perform equivalent responses as MS channels: (1) tilting in response to tension and (2) dissipation of osmotic gradients. Lessons learned from pore forming peptides could enrich our knowledge of mechanisms of action and evolution of these channels. Here, the current state of the art is presented and general principles of membrane regulation of mechanosensitive function are discussed.