Nonenzymatic autoligation in direct three-color detection of RNA and DNA point mutations

Enzymatic ligation methods are useful in diagnostic detection of DNA sequences. Here we describe the investigation of nonenzymatic phosphorothioate-iodide DNA autoligation chemistry as a method for detection and identification of both RNA and DNA sequences. Combining ligation specificity with the hybridization specificity of the ligated product is shown to yield discrimination of a point mutation as high as >10(4)-fold. Unlike enzymatic ligations, this reaction is found to be equally efficient on RNA or DNA templates. The reaction is also shown to exhibit a significant level of self-amplification, with the template acting in catalytic fashion to ligate multiple pairs of probes. A strategy for fluorescence labeling of three autoligating energy transfer (ALET) probes and directly competing them for autoligation on a target sequence is described. The method is tested in several formats, including solution phase, gel, and blot assays. The ALET probe design offers direct RNA detection, combining high sequence specificity with an easily detectable color change by fluorescence resonance energy transfer (FRET).     

RNA-templated DNA ligation for transcript analysis

Ligase-mediated gene detection has proven valuable for detection and precise distinction of DNA sequence variants. We have recently shown that T4 DNA ligase can also be used to distinguish single nucleotide variants of RNA sequences. Here we describe parameters that influence RNA-templated DNA ligation by T4 DNA ligase. The reaction proceeds much more slowly, requiring more enzyme, compared to ligation of the same oligonucleotides hybridized to the corresponding DNA sequence. The reaction is inhibited at high concentrations of ATP and NaCl and both magnesium and manganese ions can support the reaction. We define reaction conditions where 80% of RNA target molecules can template a diagnostic ligation reaction. Ligase-mediated RNA detection should provide a useful mechanism for sensitive and accurate detection and distinction of RNA sequence variants.     

Single nucleotide specific detection of DNA by native chemical ligation of fluorescence labeled PNA-probes

DNA-directed chemical ligations provide the opportunity to diagnose DNA sequences with very high sequence specificity. Fluorescent labels have been attached to reactive probes to enable the homogeneous detection of DNA and RNA. However, it has frequently been found that the attachment of fluorescent labels results in decreases of ligation fidelity. Herein we describe the development of a fluorogenic ligation reaction that provides for 10(2)-fold to perfect sequence selectivity. The reaction is based on the isocysteine-mediated native chemical PNA ligation. It is shown that DNA-induced rate accelerations of approximately 43.000-fold can be obtained through subtle variations of the ligation conditions. PNA-thioesters and isocysteine-PNA conjugates were labeled with FAM and TMR fluorophores, respectively. For gaining rapid synthetic access, a convenient on-resin labeling approach was developed. A new PNA monomer featuring an Alloc-protected lysine side chain was synthesized and coupled in solid-phase PNA synthesis. In the event of a ligation reaction the two fluorophores are brought into proximity. It is shown that fluorescence resonance energy transfer provides a positive fluorescence signal which is specific for product formation rather than for loss of starting materials. Single base mutations can be detected within minutes and with very high sequence selectivity at optimized conditions.     

Template-independent ligation of single-stranded DNA by T4 DNA ligase

T4 DNA ligase is one of the workhorses of molecular biology and used in various biotechnological applications. Here we report that this ligase, unlike Escherichia coli DNA ligase, Taq DNA ligase and Ampligase, is able to join the ends of single-stranded DNA in the absence of any duplex DNA structure at the ligation site. Such nontemplated ligation of DNA oligomers catalyzed by T4 DNA ligase occurs with a very low yield, as assessed by quantitative competitive PCR, between 10(-6) and 10(-4) at oligonucleotide concentrations in the range 0.1-10 nm, and thus is insignificant in many molecular biological applications of T4 DNA ligase. However, this side reaction may be of paramount importance for diagnostic detection methods that rely on template-dependent or target-dependent DNA probe ligation in combination with amplification techniques, such as PCR or rolling-circle amplification, because it can lead to nonspecific background signals or false positives. Comparison of ligation yields obtained with substrates differing in their strandedness at the terminal segments involved in ligation shows that an acceptor duplex DNA segment bearing a 3'-hydroxy end, but lacking a 5'-phosphate end, is sufficient to play a role as a cofactor in blunt-end ligation.     

额外的错配碱基提高T4 DNA连接酶等位特异性连接

连接是一种主要的DNA处理过程。由于较低的商业成本以及核酸底物识别的灵活性,T4 DNA连接酶被广泛应用于生物分子工程,特别是特定核酸序列的等位特异性连接检测。本文评估了在T4 DNA连接酶介导的连接反应中,引入额外的错配碱基对所产生的影响。设计了超过150组DNA/DNA或DNA/RNA带有的额外错配碱基对的组合。结果发现,引入额外的错配碱基对后,T4 DNA 连接酶在DNA/DNA连接中特异性可提高60倍以上,而在DNA/RNA连接中特异性只能提高2倍。在等位特异性连接中,有的错配碱基对可使T4 DNA连接酶的特异性提高600多倍。     

What's new: Ligation-based DNA diagnostics

A number of novel gene detection techniques all revolve around the ligation of synthetic nucleic acid probes. In such ligase-assisted gene detection reactions, specific DNA or RNA sequences are investigated by using them as guides for the covalent joining of pairs of probe molecules. The probes are designed to hybridize immediately next to each other on the target nucleic acid strand. Demonstration of ligated probes results in highly specific detection of and efficient distinction between similar sequence variants under standard reaction conditions. Accordingly, the principle has been applied in automated genetic screening procedures. Ligation reactions are also integral to a number of amplification procedures and they will be of value in an expanding range of genetic analyses.     

The role of reactivity in DNA templated native chemical PNA ligation during PCR

DNA templated fluorogenic reactions have been used as a diagnostic tool for the sequence specific detection of nucleic acids; and it has been shown that the native chemical ligation between thioester- and 1,2-aminothiol-modified PNA probes is amongst the most selective DNA detection methods reported. We explored whether a DNA templated reaction can be interfaced with the polymerase chain reaction (PCR). This endeavor posed a significant challenge. The reactive groups involved must be sufficiently stable to tolerate the high temperature applied in the PCR process. Nevertheless, the ligation reaction must proceed very rapidly and sequence specifically within the short time available in the annealing and primer extension steps before denaturation is used after approx. 1 min to commence the next PCR cycle. This required a careful optimization of the ternary complex architecture as well as adjustments of probe length and probe reactivities. Our results point to the prime importance of the ligation architecture. We show that once suitable annealing sites have been identified less reactive probe sets may be preferable if sequence specificity is of major concern. The reactivity tuning enabled the development of an in-PCR ligation, which was used for the single nucleotide specific typing of the V600E (T1799A) point mutation in the human BRaf gene. Showcasing the efficiency and sequence specificity of native chemical PNA ligation, attomolar template proofed sufficient to trigger signal while a 1000-fold higher load of single mismatched template failed to induce appreciable signal.     

QCM detection of DNA targets with single-base mutation based on DNA ligase reaction and biocatalyzed deposition amplification

A novel biosensing technique for highly specific identification of gene with single-base mutation is proposed based on the implementation of the DNA ligase reaction and the biocatalyzed deposition of an insoluble product. The target gene mediated deposition of an insoluble precipitate is then transduced by quartz crystal microbalance (QCM) measurements. In this method, the DNA target hybridizes with a capture DNA probe tethered onto the gold electrode and then with a biotinylated allele-specific detection DNA. A ligase reaction is performed to generate the ligation between the capture and the detection probes, provided there is perfect match between the DNA target and the detection probe. Otherwise even when there is an allele mismatch between them, no ligation would take place. After thermal treatment at an elevated temperature, the formed duplex melts apart that merely allows the detection probe perfectly matched with the target to remain on the electrode surface. The presence of the biotinylated allele-matched probe is then detected by the QCM via the binding to streptavidin-peroxide horseradish (SA-HRP), which catalyzes the oxidative precipitation of 3,3-diaminobenzidine (DAB) by H2O2 on the electrode and provides an amplified frequency response. The proposed approach has been successfully implemented for the identification of single-base mutation in -28 site of the beta-thalassemia gene with a detection limit of 0.1 nM, demonstrating that this method provides a highly specific and cost-efficient approach for point mutation detection.     

Site-directed modification of DNA duplexes by chemical ligation.

The efficiency of chemical ligation method have been demonstrated by assembling a number of DNA duplexes with modified sugar phosphate backbone. Condensation on a tetradecanucleotide template of hexa(penta)- and undecanucleotides differing only in the terminal nucleoside residue have been performed using water-soluble carbodiimide as a condensing agent. As was shown by comparing the efficiency of chemical ligation of single-strand breaks in those duplexes, the reaction rate rises 70 or 45 times if the 3'-OH group is substituted with an amino or phosphate group (the yield of products with a phosphoramidate or pyrophosphate bond is 96-100% in 6 d). Changes in the conformation of reacting groups caused by mismatched base pairs (A.A, A.C) as well as the hybrid rU.dA pair or an unpaired base make the template-directed condensation less effective. The thermal stability of DNA duplexes was assayed before and after the chemical ligation. Among all of the modified duplexes, only the duplex containing 3'-rU in the nick was found to be a substrate of T4 DNA ligase.     

Structure-independent and quantitative ligation of single-stranded DNA

Ligation of an adapter oligonucleotide to a single-stranded cDNA is central to many molecular biology techniques. Current single-stranded ligation approaches suffer from low efficiencies and are strongly inhibited by preexisting DNA secondary structure. We develop an approach for ligating low concentrations of single-stranded DNAs to a DNA adapter with near-quantitative efficiency, unaffected by secondary structure in the target DNA. This efficient DNA ligation reaction will facilitate development of robust procedures for quantifying small amounts of highly structured cDNAs and their RNA templates.     

Chemical ligation of oligodeoxyribonucleotides on circular DNA templates.

We report the use of small circular DNA as a triplex-directing template for the highly efficient chemical ligation of oligodeoxyribonucleotides (ODNs) using cyanogen bromide (BrCN). These investigations compared the use of a linear homopyrimidine DNA template (17mer) and a circular pyrimidine-rich DNA template (44mer) for directing the chemical ligation of two homopurine ODNs (6mer + 11mer). The effects of substrate/template ratio, buffer, salt, ionic strength, pH and temperature have been examined in the BrCN activated ligation reactions. The optimal yield of 51% for ligation on the linear template was at pH 6.0, 200 mM MgCl2, 4 degreesC. In contrast, near quantitative ligation on the circular template occurred at higher pH, higher temperature, and showed less dependence on Mg2+concentration (97% yield, pH 7.5, 200 mM MgCl2, 25 degreesC). The relative observed rate of the ligation reaction was a minimum of 35 times faster on the circular DNA template relative to the linear template at pH 7.5, 200 mM MgCl2, 4 degreesC. These investigations reveal that chemical ligation of short ODNs on circularized DNA templates through triplex formation is a highly efficient process over a broad range of conditions.     

The ligation amplification reaction (LAR)--amplification of specific DNA sequences using sequential rounds of template-dependent ligation

A novel DNA sequence detection method that utilizes the ligation of oligonucleotide pairs that are complementary to adjacent sites on appropriate DNA templates is described. The product is increased by either linear or exponential amplification using sequential rounds of template-dependent ligation. In the case of linear amplification, a single pair of oligonucleotides is ligated, the reaction is heated to dissociate the ligation product, and an additional round of ligation is performed. After n rounds there is a (1 + x) X n-fold amplification of product, where x is the efficiency of the ligation reaction. Exponential amplification utilizes two pairs of oligonucleotides, one complementary to the upper strand and one to the lower strand of a target sequence. The products of the ligation reaction serve as templates for subsequent rounds of ligation. In this case there is (1 + x)(n-1)-fold amplification of product after n rounds. A single base-pair mismatch between the annealed oligonucleotides and the template prevents ligation, thus allowing the distinction of single base-pair differences between DNA templates. At high template concentrations, the ligation reaction has an efficiency approaching 100%. In this report, we demonstrate the use of the ligation amplification reaction (LAR) to distinguish the normal from the sickle cell allele of the human beta-globin gene. We also report the use of LAR as a detection system for polymerase chain reaction-enriched DNA sequences.     

In vitro selection of optimal DNA substrates for ligation by a water-soluble carbodiimide

We have used in vitro selection to investigate the sequence requirements for efficient template-directed ligation of oligonucleotides at 0°C using a water-soluble carbodiimide as condensing agent. We find that only 2 by at each side of the ligation junction are needed. We also studied chemical ligation of substrate ensembles that we have previously selected as optimal for ligation by RNA ligase or by DNA ligase. As anticipated, we find that substrates selected with DNA ligase ligate efficiently with a chemical ligating agent, and vice versa. Substrates selected using RNA ligase are not ligated by the chemical condensing agent and vice versa. The implications of these results for prebiotic chemistry are discussed.Correspondence to: Leslie E. Orgel 1444     

Chemically modified primers for improved multiplex polymerase chain reaction

Multiplex polymerase chain reaction (PCR), the amplification of multiple targets in a single reaction, presents a new set of challenges that further complicate more traditional PCR setups. These complications include a greater probability for nonspecific amplicon formation and for imbalanced amplification of different targets, each of which can compromise quantification and detection of multiple targets. Despite these difficulties, multiplex PCR is frequently used in applications such as pathogen detection, RNA quantification, mutation analysis, and (recently) next generation DNA sequencing. Here we investigated the utility of primers with one or two thermolabile 4-oxo-1-pentyl phosphotriester modifications in improving multiplex PCR performance. Initial endpoint and real-time analyses revealed a decrease in off-target amplification and a subsequent increase in amplicon yield. Furthermore, the use of modified primers in multiplex setups revealed a greater limit of detection and more uniform amplification of each target as compared with unmodified primers. Overall, the thermolabile modified primers present a novel and exciting avenue for improving multiplex PCR performance.     

Specific detection of DNA and RNA targets using a novel isothermal nucleic acid amplification assay based on the formation of a three-way junction structure

The formation of DNA three-way junction (3WJ) structures has been utilised to develop a novel isothermal nucleic acid amplification assay (SMART) for the detection of specific DNA or RNA targets. The assay consists of two oligonucleotide probes that hybridise to a specific target sequence and, only then, to each other forming a 3WJ structure. One probe (template for the RNA signal) contains a non-functional single-stranded T7 RNA polymerase promoter sequence. This promoter sequence is made double-stranded (hence functional) by DNA polymerase, allowing T7 RNA polymerase to generate a target-dependent RNA signal which is measured by an enzyme-linked oligosorbent assay (ELOSA). The sequence of the RNA signal is always the same, regardless of the original target sequence. The SMART assay was successfully tested in model systems with several single-stranded synthetic targets, both DNA and RNA. The assay could also detect specific target sequences in both genomic DNA and total RNA from Escherichia coli. It was also possible to generate signal from E.coli samples without prior extraction of nucleic acid, showing that for some targets, sample purification may not be required. The assay is simple to perform and easily adaptable to different targets.     

Site-specific fluorescent labeling of DNA using Staudinger ligation

We report the site-specific fluorescent labeling of DNA using Staudinger ligation with high efficiency and high selectivity. An oligonucleotide modified at its 5' end by an azido group was selectively reacted with 5-[(N-(3'-diphenylphosphinyl-4'-methoxycarbonyl)phenylcarbonyl)aminoacetamido]fluorescein (Fam) under aqueous conditions to produce a Fam-labeled oligonucleotide with a high yield (approximately 90%). The fluorescent oligonucleotide was characterized by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). Because of the relatively high yield of the Staudinger ligation, simple purification of the product by size-exclusion chromatography and desalting is sufficient for the resulting fluorescent oligonucleotide to be used as a primer in a Sanger dideoxy sequencing reaction to produce fluorescent DNA extension fragments, which are analyzed by a fluorescent electrophoresis DNA sequencer. The results indicate that the Staudinger ligation can be used successfully and site-specifically to prepare fluorescent oligonucleotides to produce DNA sequencing products, which are detected with single base resolution in a capillary electrophoresis DNA sequencer using laser-induced fluorescence detection.