NMR study of Ni2+ binding to the H-N-H endonuclease domain of colicin E9.

Ni2+ affinity columns are widely used for protein purification, but they carry the risk that Ni2+ ions may bind to the protein, either adventitiously or at a physiologically important site. Dialysis against ethylenediaminetetraacetic acid (EDTA) is normally used to remove metal ions bound adventitiously to proteins; however, this approach does not always work. Here we report that a bacterial endonuclease, the DNase domain of colicin E9, binds Ni2+ acquired from Ni2+ affinity columns, and appears to bind [Ni(EDTA)(H2O)n]2- at low ionic strength. NMR was used to detect the presence of both Ni2+ coordinated to amino acid side chains and [Ni(EDTA)(H2O)N]2-. Dialysis against > or =0.2 M NaCl was required to remove the [Ni(EDTA)(H2O)n]2-. The NMR procedure we have used to characterize the presence of Ni2+ and [Ni(EDTA)(H2O)n]2- should be applicable to other proteins where there is the possibility of binding paramagnetic metal ions that are present to expedite protein purification. In the present case, the binding of Ni2+ seems likely to be physiologically relevant, and the NMR data complement recent X-ray crystallographic evidence concerning the number of histidine ligands to bound Ni2+.     

High-resolution crystal structure of a truncated ColE7 translocation domain: implications for colicin transport across membranes

ColE7 is a nuclease-type colicin released from Escherichia coli to kill sensitive bacterial cells by degrading the nucleic acid molecules in their cytoplasm. ColE7 is classified as one of the group A colicins, since the N-terminal translocation domain (T-domain) of the nuclease-type colicins interact with specific membrane-bound or periplasmic Tol proteins during protein import. Here, we show that if the N-terminal tail of ColE7 is deleted, ColE7 (residues 63-576) loses its bactericidal activity against E.coli. Moreover, TolB protein interacts directly with the T-domain of ColE7 (residues 1-316), but not with the N-terminal deleted T-domain (residues 60-316), as detected by co-immunoprecipitation experiments, confirming that the N-terminal tail is required for ColE7 interactions with TolB. The crystal structure of the N-terminal tail deleted ColE7 T-domain was determined by the multi-wavelength anomalous dispersion method at a resolution of 1.7 angstroms. The structure of the ColE7 T-domain superimposes well with the T-domain of ColE3 and TR-domain of ColB, a group A Tol-dependent colicin and a group B TonB-dependent colicin, respectively. The structural resemblance of group A and B colicins implies that the two groups of colicins may share a mechanistic connection during cellular import.     

Fine tuning of the catalytic activity of colicin E7 nuclease domain by systematic N‐terminal mutations

The nuclease domain of colicin E7 (NColE7) promotes the nonspecific cleavage of nucleic acids at its C‐terminal HNH motif. Interestingly, the deletion of four N‐terminal residues (446–449 NColE7 = KRNK) resulted in complete loss of the enzyme activity. R447A mutation was reported to decrease the nuclease activity, but a detailed analysis of the role of the highly positive and flexible N‐terminus is still missing. Here, we present the study of four mutants, with a decreased activity in the following order: NColE7  >> KGNK > KGNG ～ GGNK > GGNG. At the same time, the folding, the metal‐ion, and the DNA‐binding affinity were unaffected by the mutations as revealed by linear and circular dichroism spectroscopy, isothermal calorimetric titrations, and gel mobility shift experiments. Semiempirical quantum chemical calculations and molecular dynamics simulations revealed that K446, K449, and/or the N‐terminal amino group are able to approach the active centre in the absence of the other positively charged residues. The results suggested a complex role of the N‐terminus in the catalytic process that could be exploited in the design of a controlled nuclease.     

Metal ions and phosphate binding in the H-N-H motif: crystal structures of the nuclease domain of ColE7/Im7 in complex with a phosphate ion and different divalent metal ions

H-N-H is a motif found in the nuclease domain of a subfamily of bacteria toxins, including colicin E7, that are capable of cleaving DNA nonspecifically. This H-N-H motif has also been identified in a subfamily of homing endonucleases, which cleave DNA site specifically. To better understand the role of metal ions in the H-N-H motif during DNA hydrolysis, we crystallized the nuclease domain of colicin E7 (nuclease-ColE7) in complex with its inhibitor Im7 in two different crystal forms, and we resolved the structures of EDTA-treated, Zn(2+)-bound and Mn(2+)-bound complexes in the presence of phosphate ions at resolutions of 2.6 A to 2.0 A. This study offers the first determination of the structure of a metal-free and substrate-free enzyme in the H-N-H family. The H-N-H motif contains two antiparallel beta-strands linked to a C-terminal alpha-helix, with a divalent metal ion located in the center. Here we show that the metal-binding sites in the center of the H-N-H motif, for the EDTA-treated and Mg(2+)-soaked complex crystals, were occupied by water molecules, indicating that an alkaline earth metal ion does not reside in the same position as a transition metal ion in the H-N-H motif. However, a Zn(2+) or Mn(2+) ions were observed in the center of the H-N-H motif in cases of Zn(2+) or Mn(2+)-soaked crystals, as confirmed in anomalous difference maps. A phosphate ion was found to bridge between the divalent transition metal ion and His545. Based on these structures and structural comparisons with other nucleases, we suggest a functional role for the divalent transition metal ion in the H-N-H motif in stabilizing the phosphoanion in the transition state during hydrolysis.     

Solution structure of SWI1 AT-rich interaction domain from Saccharomyces cerevisiae and its nonspecific binding to DNA

SWI1 is a subunit of the SWI/SNF complex involved in chromatin remodeling. It contains an AT-rich interaction domain (ARID) which has the potential DNA binding activity. In this study, we determined the solution structure of the SWI1 ARID domain from Saccharomyces cerevisiae by nuclear magnetic resonance spectroscopy. Yeast SWI1 ARID domain is composed of seven alpha helices, six of which are conserved among the ARID family. In addition, the DNA-binding activity of the SWI1 ARID domain was confirmed by chemical shift perturbation assay. Similar to its human homolog, the yeast SWI1 ARID domain binds DNA nonspecifically.     

Change of thermal stability of colicin E7 triggered by acidic pH suggests the existence of unfolded intermediate during the membrane-translocation phase

Purified colicin E7 was analyzed by CD spectrum and gel filtration chromatography in a mimicking membrane-translocation phase. It was found that the CD spectra of colicin E7 at pH 7 and pH 2.5 were similar. Although the melting temperature of the protein shifted from 54.5°C to 34°C at low pH, the thermal denaturation curves of colicin E7 at different pH conditions still fit a two-state model. These experimental results imply that a minor structural change, triggered by acidic pH, for instance, may reduce the energy required for protein melting. In contrast to the minor change in secondary structure at different pH conditions, we observed that, in vitro, all monomeric colicin E7s converted into multimer-like conformations after recovering from the partial unfolding process. This multimeric form of colicin can only be dissociated by formamide and guanidine hydrochloride, indicating that this protein complex is indeed formed by aggregation of the monomeric colicins. Most interestingly, the aggregated colicins still perform in vivo bacteriocidal activity. We suggest that in a partial unfolding state the colicin is prepared for binding to the specific targets for translocation through the membrane. However, in the absence of specific targets in vitro these unfold intermediates may therefore aggregate into the multimeric form of colicins. Proteins 32:17–25, 1998. © 1998 Wiley-Liss, Inc.     

The absence of tertiary interactions in a self-assembled DNA crystal structure

DNA is a highly effective molecule for controlling nanometer-scale structure. The convenience of using DNA lies in the programmability of Watson-Crick base-paired secondary interactions, useful both to design branched molecular motifs and to connect them through sticky-ended cohesion. Recently, the tensegrity triangle motif has been used to self-assemble three-dimensional crystals whose structures have been determined; sticky ends were reported to be the only intermolecular cohesive elements in those crystals. A recent communication in this journal suggested that tertiary interactions between phosphates and cytosine N(4) groups are responsible for intermolecular cohesion in these crystals, in addition to the secondary and covalent interactions programmed into the motif. To resolve this issue, we report experiments challenging this contention. Gel electrophoresis demonstrates that the tensegrity triangle exists in conditions where cytosine-PO(4) tertiary interactions seem ineffective. Furthermore, we have crystallized a tensegrity triangle using a junction lacking the cytosine suggested for involvement in tertiary interactions. The unit cell is isomorphous with that of a tensegrity triangle crystal reported earlier. This structure has been solved by molecular replacement and refined. The data presented here leave no doubt that the tensegrity triangle crystal structures reported earlier depend only on base pairing and covalent interactions for their formation.     

The role of the N-terminal loop in the function of the colicin E7 nuclease domain

Colicin E7 (ColE7) is a metallonuclease toxin of Escherichia coli belonging to the HNH superfamily of nucleases. It contains highly conserved amino acids in its HHX₁₄NX₈HX₃H ββα-type metal ion binding C-terminal active centre. However, the proximity of the arginine at the N-terminus of the nuclease domain of ColE7 (NColE7, 446–576) is necessary for the hydrolytic activity. This poses a possibility of allosteric activation control in this protein. To obtain more information on this phenomenon, two protein mutants were expressed, i.e. four and 25 N-terminal amino acids were removed from NColE7. The effect of the N-terminal truncation on the Zn²⁺ ion and DNA binding as well as on the activity was investigated in this study by mass spectrometry, synchrotron-radiation circular dichroism and fluorescence spectroscopy and agarose gel mobility shift assays. The dynamics of protein backbone movement was simulated by molecular dynamics. Semiempirical quantum chemical calculations were performed to obtain better insight into the structure of the active centre. The longer protein interacted with both Zn²⁺ ion and DNA more strongly than its shorter counterpart. The results were explained by the structural stabilization effect of the N-terminal amino acids on the catalytic centre. In agreement with this, the absence of the N-terminal sequences resulted in significantly increased movement of the backbone atoms compared with that in the native NColE7: in ΔN25-NColE7 the amino acid strings between residues 485–487, 511–515 and 570–571, and in ΔN4-NColE7 those between residues 467–468, 530–535 and 570–571.     

The crystal structure of the DNase domain of colicin E7 in complex with its inhibitor Im7 protein

Background: Colicin E7 (ColE7) is one of the bacterial toxins classified as a DNase-type E-group colicin. The cytotoxic activity of a colicin in a colicin-producing cell can be counteracted by binding of the colicin to a highly specific immunity protein. This biological event is a good model system for the investigation of protein recognition.Results: The crystal structure of a one-to-one complex between the DNase domain of colicin E7 and its cognate immunity protein Im7 has been determined at 2.3 Å resolution. Im7 in the complex is a varied four-helix bundle that is identical to the structure previously determined for uncomplexed Im7. The structure of the DNase domain of ColE7 displays a novel α/β fold and contains a Zn²⁺ ion bound to three histidine residues and one water molecule in a distorted tetrahedron geometry. Im7 has a V-shaped structure, extending two arms to clamp the DNase domain of ColE7. One arm (α1¹–loop12–α2¹; where ¹ represents helices in Im7) is located in the region that displays the greatest sequence variation among members of the immunity proteins in the same subfamily. This arm mainly uses acidic sidechains to interact with the basic sidechains in the DNase domain of ColE7. The other arm (loop 23–α3¹–loop 34) is more conserved and it interacts not only with the sidechain but also with the mainchain atoms of the DNase domain of ColE7.Conclusions: The protein interfaces between the DNase domain of ColE7 and Im7 are charge-complementary and charge interactions contribute significantly to the tight and specific binding between the two proteins. The more variable arm in Im7 dominates the binding specificity of the immunity protein to its cognate colicin. Biological and structural data suggest that the DNase active site for ColE7 is probably near the metal-binding site.     

Crystal structural analysis and metal-dependent stability and activity studies of the ColE7 endonuclease domain in complex with DNA/Zn2+ or inhibitor/Ni2+

The nuclease domain of ColE7 (N-ColE7) contains an H-N-H motif that folds in a beta beta alpha-metal topology. Here we report the crystal structures of a Zn2+-bound N-ColE7 (H545E mutant) in complex with a 12-bp duplex DNA and a Ni2+-bound N-ColE7 in complex with the inhibitor Im7 at a resolution of 2.5 A and 2.0 A, respectively. Metal-dependent cleavage assays showed that N-ColE7 cleaves double-stranded DNA with a single metal ion cofactor, Ni2+, Mg2+, Mn2+, and Zn2+. ColE7 purified from Escherichia coli contains an endogenous zinc ion that was not replaced by Mg2+ at concentrations of <25 mM, indicating that zinc is the physiologically relevant metal ion in N-ColE7 in host E. coli. In the crystal structure of N-ColE7/DNA complex, the zinc ion is directly coordinated to three histidines and the DNA scissile phosphate in a tetrahedral geometry. In contrast, Ni2+ is bound in N-ColE7 in two different modes, to four ligands (three histidines and one phosphate ion), or to five ligands with an additional water molecule. These data suggest that the divalent metal ion in the His-metal finger motif can be coordinated to six ligands, such as Mg2+ in I-PpoI, Serratia nuclease and Vvn, five ligands or four ligands, such as Ni2+ or Zn2+ in ColE7. Universally, the metal ion in the His-metal finger motif is bound to the DNA scissile phosphate and serves three roles during hydrolysis: polarization of the P-O bond for nucleophilic attack, stabilization of the phosphoanion transition state and stabilization of the cleaved product.     

Fast detection of quadruplex structure in DNA by the intrinsic fluorescence of a single-stranded DNA binding protein

Single-stranded guanine-rich (G-rich) DNA can fold into a four-stranded G-quadruplex structure and such structures are implicated in important biological processes and therapeutic applications. So far, bioinformatic analysis has identified up to several hundred thousand of putative quadruplex sequences in the genome of human and other animal. Given such a large number of sequences, a fast assay would be desired to experimentally verify the structure of these sequences. Here we describe a method that identifies the quadruplex structure by a single-stranded DNA binding protein from a thermoautotrophic archaeon. This protein binds single-stranded DNA in the unfolded, but not in the folded form. Upon binding to DNA, its fluorescence can be quenched by up to 70%. Formation of quadruplex greatly reduces fluorescence quenching in a K+-dependent manner. This structure-dependent quenching provides simple and fast detection of quadruplex in DNA at low concentration without DNA labelling.     

Identification of a second DNA binding site in human DNA methyltransferase 3A by substrate inhibition and domain deletion

The human DNA methyltransferase 3A (DNMT3A) is essential for establishing DNA methylation patterns. Knowing the key factors involved in the regulation of mammalian DNA methylation is critical to furthering understanding of embryonic development and designing therapeutic approaches targeting epigenetic mechanisms. We observe substrate inhibition for the full length DNMT3A but not for its isolated catalytic domain, demonstrating that DNMT3A has a second binding site for DNA. Deletion of recognized domains of DNMT3A reveals that the conserved PWWP domain is necessary for substrate inhibition and forms at least part of the allosteric DNA binding site. The PWWP domain is demonstrated here to bind DNA in a cooperative manner with μM affinity. No clear sequence preference was observed, similar to previous observations with the isolated PWWP domain of Dnmt3b but with one order of magnitude weaker affinity. Potential roles for a low affinity, low specificity second DNA binding site are discussed.     

Development of a protein microarray using sequence-specific DNA binding domain on DNA chip surface

A protein microarray based on DNA microarray platform was developed to identify protein-protein interactions in vitro. The conventional DNA chip surface by 156-bp PCR product was prepared for a substrate of protein microarray. High-affinity sequence-specific DNA binding domain, GAL4 DNA binding domain, was introduced to the protein microarray as fusion partner of a target model protein, enhanced green fluorescent protein. The target protein was oriented immobilized directly on the DNA chip surface. Finally, monoclonal antibody of the target protein was used to identify the immobilized protein on the surface. This study shows that the conventional DNA chip can be used to make a protein microarray directly, and this novel protein microarray can be applicable as a tool for identifying protein-protein interactions.     

Crystal structure of a DNA binding protein from the hyperthermophilic euryarchaeon Methanococcus jannaschii

The Sac10b family consists of a group of highly conserved DNA binding proteins from both the euryarchaeotal and the crenarchaeotal branches of Archaea. The proteins have been suggested to play an architectural role in the chromosomal organization in these organisms. Previous studies have mainly focused on the Sac10b proteins from the crenarchaeota. Here, we report the 2.0 A resolution crystal structure of Mja10b from the euryarchaeon Methanococcus jannaschii. The model of Mja10b has been refined to an R-factor of 20.9%. The crystal structure of an Mja10b monomer reveals an alpha/beta structure of four beta-strands and two alpha-helices, and Mja10b assembles into a dimer via an extensive hydrophobic interface. Mja10b has a similar topology to that of its crenarchaeota counterpart Sso10b (also known as Alba). Structural comparison between the two proteins suggests that structural features such as hydrophobic inner core, acetylation sites, dimer interface, and DNA binding surface are conserved among Sac10b proteins. Structural differences between the two proteins were found in the loops. To understand the structural basis for the thermostability of Mja10b, the Mja10b structure was compared to other proteins with similar topology. Our data suggest that extensive ion-pair networks, optimized accessible surface area and the dimerization via hydrophobic interactions may contribute to the enhanced thermostability of Mja10b.     

The crystal structure of an odorant binding protein from Anopheles gambiae: evidence for a common ligand release mechanism

The Anopheles gambiae mosquito is the main vector of malaria transmission in sub-Saharan Africa. We present here a 1.5A crystal structure of AgamOBP1, an odorant binding protein (OBP) from the A. gambiae mosquito. The protein crystallized as a dimer with a unique binding pocket consisting of a continuous tunnel running through both subunits of the dimer and occupied by a PEG molecule. We demonstrate that AgamOBP1 undergoes a pH dependent conformational change that is associated with reduced ligand binding. A predominance of acid-labile hydrogen bonds involving the C-terminal loop suggests a mechanism in which a drop in pH causes C-terminal loop to open, leaving the binding tunnel solvent exposed, thereby lowering binding affinity for ligand. Because proteins from two distantly related insects also undergo a pH dependent conformational change involving the C-terminus that is associated with reduced ligand affinity, our results suggest a common mechanism for OBP activity.     

Reactivation of mutant p53: Constraints on mechanism highlighted by principal component analysis of the DNA binding domain

Most p53 mutations associated with cancer are located in its DNA binding domain (DBD). Many structures (X‐ray and NMR) of this domain are available in the protein data bank (PDB) and a vast conformational heterogeneity characterizes the various free and complexed states. The major difference between the apo and the holo‐complexed states appears to lie in the L1 loop. In particular, the conformations of this loop appear to depend intimately on the sequence of DNA to which it binds. This conclusion builds upon recent observations that implicate the tetramerization and the C‐terminal domains (respectively TD and Cter) in DNA binding specificity. Detailed PCA analysis of the most recent collection of DBD structures from the PDB have been carried out. In contrast to recommendations that small molecules/drugs stabilize the flexible L1 loop to rescue mutant p53, our study highlights a need to retain the flexibility of the p53 DNA binding surface (DBS). It is the adaptability of this region that enables p53 to engage in the diverse interactions responsible for its functionality. Proteins 2016; 84:1443–1461. © 2016 Wiley Periodicals, Inc.