Bacterial mechanosensitive channels as a paradigm for mechanosensory transduction

Research on bacterial mechanosensitive (MS) channels has since their discovery been at the forefront of the MS channel field due to extensive studies of the structure and function of MscL and MscS, two of the several different types of MS channels found in bacteria. Just a few years after these two MS channels were cloned their 3D structure was solved by X-ray crystallography. Today, the repertoire of multidisciplinary approaches used in experimental and theoretical studies following the cloning and crystallographic determination of the MscL and MscS structure has expanded by including electronparamagnetic resonance (EPR) and F?rster resonance energy transfer (FRET) spectroscopy aided by computational modelling employing molecular dynamics as well as Brownian dynamics simulations, which significantly advanced the understanding of structural determinants of the gating and conduction properties of these two MS channels. These extensive multidisciplinary studies of MscL and MscS have greatly contributed to elucidation of the basic physical principles of MS channel gating by mechanical force. This review summarizes briefly the major experimental and conceptual advancements, which helped in establishing MscL and MscS as a major paradigm of mechanosensory transduction in living cells.     

Two Families of Mechanosensitive Channel Proteins

Mechanosensitive (MS) channels that provide protection against hypoosmotic shock are found in the membranes of organisms from the three domains of life: bacteria, archaea, and eucarya. Two families of ubiquitous MS channels are recognized, and these have been designated the MscL and MscS families. A high-resolution X-ray crystallographic structure is available for a member of the MscL family, and extensive molecular genetic, biophysical, and biochemical studies conducted in many laboratories have allowed postulation of a gating mechanism allowing the interconversion of a tightly closed state and an open state that controls transmembrane ion and metabolite fluxes. In contrast to the MscL channel proteins, which are of uniform topology, the much larger MscS family includes protein members with topologies that are predicted to vary from 3 to 11 α-helical transmembrane segments (TMSs) per polypeptide chain. Sequence analyses reveal that the three C-terminal TMSs of MscS channel proteins are conserved among family members and that the third of these three TMSs exhibits a 20-residue motif that is shared by the channel-forming TMS (TMS 1) of the MscL proteins. We propose that this C-terminal TMS in MscS family homologues serves as the channel-forming helix in a homooligomeric structure. The presence of a conserved residue pattern for the putative channel-forming TMSs in the MscL and MscS family proteins suggests a common structural organization, gating mechanism, and evolutionary origin.     

Functional design of bacterial mechanosensitive channels. Comparisons and contrasts illuminated by random mutagenesis

MscS and MscL are mechanosensitive channels found in bacterial plasma membranes that open large pores in response to membrane tension. These channels function to alleviate excess cell turgor invoked by rapid osmotic downshock. Although much is known of the structure and molecular mechanisms underlying MscL, genes correlating with MscS activity have only recently been identified. Previously, it was shown that eliminating the expression of Escherichia coli yggB removed a major portion of MscS activity. YggB is distinct from MscL by having no obvious structural similarity. Here we have reconstituted purified YggB in proteoliposomes and have successfully detected MscS channel activity, confirming that purified YggB protein encodes MscS activity. Additionally, to define functional regions of the channel protein, we have randomly mutagenized the structural gene and isolated a mutant that evokes a gain-of-function phenotype. Physiological experiments demonstrate that the mutated channel allows leakage of solutes from the cell, suggesting inappropriate channel opening. Interestingly, this mutation is analogous in position and character to mutations yielding a similar phenotype in MscL. Hence, although MscS and MscL mechanosensitive channels are structurally quite distinct, there may be analogies in their gating mechanisms.     

Two families of mechanosensitive channel proteins.

Mechanosensitive (MS) channels that provide protection against hypoosmotic shock are found in the membranes of organisms from the three domains of life: bacteria, archaea, and eucarya. Two families of ubiquitous MS channels are recognized, and these have been designated the MscL and MscS families. A high-resolution X-ray crystallographic structure is available for a member of the MscL family, and extensive molecular genetic, biophysical, and biochemical studies conducted in many laboratories have allowed postulation of a gating mechanism allowing the interconversion of a tightly closed state and an open state that controls transmembrane ion and metabolite fluxes. In contrast to the MscL channel proteins, which are of uniform topology, the much larger MscS family includes protein members with topologies that are predicted to vary from 3 to 11 alpha-helical transmembrane segments (TMSs) per polypeptide chain. Sequence analyses reveal that the three C-terminal TMSs of MscS channel proteins are conserved among family members and that the third of these three TMSs exhibits a 20-residue motif that is shared by the channel-forming TMS (TMS 1) of the MscL proteins. We propose that this C-terminal TMS in MscS family homologues serves as the channel-forming helix in a homooligomeric structure. The presence of a conserved residue pattern for the putative channel-forming TMSs in the MscL and MscS family proteins suggests a common structural organization, gating mechanism, and evolutionary origin.     

The mechanoelectrical response of the cytoplasmic membrane of Vibrio cholerae

Persistence of Vibrio cholerae in waters of fluctuating salinity relies on the capacity of this facultative enteric pathogen to adapt to varying osmotic conditions. In an event of osmotic downshift, osmolytes accumulated inside the bacterium can be quickly released through tension-activated channels. With the newly established procedure of giant spheroplast preparation from V. cholerae, we performed the first patch-clamp characterization of its cytoplasmic membrane and compared tension-activated currents with those in Esherichia coli. Saturating pressure ramps revealed two waves of activation belonging to the ∼1-nS mechanosensitive channel of small conductance (MscS)-like channels and ∼3-nS mechanosensitive channel of large conductance (MscL)-like channels, with a pressure midpoint ratio p_0.5MscS/p_0.5MscL of 0.48. We found that MscL-like channels in V. cholerae present at a density three times higher than in E. coli, and yet, these vibrios were less tolerant to large osmotic downshocks. The Vibrio MscS-like channels exhibit characteristic inward rectification and subconductive states at depolarizing voltages; they also adapt and inactivate at subsaturating tensions and recover within 2 s upon tension release, just like E. coli MscS. Trehalose, a compatible internal osmolyte accumulated under hypertonic conditions, significantly shifts activation curves of both MscL- and MscS-like channels toward higher tensions, yet does not freely partition into the channel pore. Direct electrophysiology of V. cholerae offers new avenues for the in situ analysis of membrane components critical for osmotic survival and electrogenic transport in this pathogen.     

Adaptive behavior of bacterial mechanosensitive channels is coupled to membrane mechanics

Mechanosensitive channel of small conductance (MscS), a tension-driven osmolyte release valve residing in the inner membrane of Escherichia coli, exhibits a complex adaptive behavior, whereas its functional counterpart, mechanosensitive channel of large conductance (MscL), was generally considered nonadaptive. In this study, we show that both channels exhibit similar adaptation in excised patches, a process that is completely separable from inactivation prominent only in MscS. When a membrane patch is held under constant pressure, adaptation of both channels is manifested as a reversible current decline. Their dose–response curves recorded with 1–10-s ramps of pressure are shifted toward higher tension relative to the curves measured with series of pulses, indicating decreased tension sensitivity. Prolonged exposure of excised patches to subthreshold tensions further shifts activation curves for both MscS and MscL toward higher tension with similar magnitude and time course. Whole spheroplast MscS recordings performed with simultaneous imaging reveal activation curves with a midpoint tension of 7.8 mN/m and the slope corresponding to ∼15-nm² in-plane expansion. Inactivation was retained in whole spheroplast mode, but no adaptation was observed. Similarly, whole spheroplast recordings of MscL (V23T mutant) indicated no adaptation, which was present in excised patches. MscS activities tried in spheroplast-attached mode showed no adaptation when the spheroplasts were intact, but permeabilized spheroplasts showed delayed adaptation, suggesting that the presence of membrane breaks or edges causes adaptation. We interpret this in the framework of the mechanics of the bilayer couple linking adaptation of channels in excised patches to the relaxation of the inner leaflet that is not in contact with the glass pipette. Relaxation of one leaflet results in asymmetric redistribution of tension in the bilayer that is less favorable for channel opening.     

Bacterial mechanosensitive channels: Experiment and theory

Since their discovery in Escherichia coli some 20 years ago, studies of bacterial mechanosensitive (MS) ion channels have been at the forefront of the MS channel research field. Two major events greatly advanced the research on bacterial MS channels: (i) cloning of MscL and MscS, the MS channels of Large and Small conductance, and (ii) solving their 3D crystal structure. These events enabled further experimental studies employing EPR and FRET spectroscopy in addition to patch clamp and molecular biological techniques that have successfully been used in characterization of the structure and function of bacterial MS channels. In parallel with the experimental studies computational modelling has been applied to elucidate the molecular dynamics of MscL and MscS, which has significantly contributed to our understanding of basic physical principles of the mechanosensory transduction in living organisms.     

Mechanosensitive channels of bacteria and archaea share a common ancestral origin

The ubiquity of mechanosensitive (MS) ion channels set off a search for their functional homologues in archaea, the third domain of life. A new MS channel was identified in the archaeon Methanococcus jannaschii by using the TM1 transmembrane domain of the bacterial MS channel of large conductance, MscL, as a genetic probe to search the archaeal genomic database for MS channel homologues. The hypothetical protein MJ0170 (MscMJ) was found to harbor two MscL-like TM1 structural motifs and showed a high degree of se quence and secondary structure conservation with MscS (YggB) homologues. The alignment of sequences of MscL, MscS and MscMJ homologues further revealed that bacterial and archaeal channels form a phylogenetic tree composed of three main branches and share a common ancestral origin. This suggests the evolution of prokaryotic MS channels via gene duplication of a MscL-like progenitor gene followed by divergence, fur ther indicating that the common ancestor of the prokaryotic MS channels most likely resembled MscL. When expressed in E. coli and functionally examined by the patch clamp, the MscMJ protein behaved as a MS channel with a conductance of 270 pS in 200 mM KCl and a cation selectivity (PK/PC]) of approximately 6. The structural and functional homologue of MscMJ, MscMJLR, was identified as a second type of MS channel in M. jannaschii. The channel has a conductance of approximately 2 nS, rectifies with voltage and shares cation selectivity with MscMJ. The stoichiometry of both types of MS channels revealed that the free energy of activation, deltaG0 approximately 7kT, obtained for MscMJ matches the one calculated for MscS, deltaG0 approximately 5kT, whereas the free energy of activation approximately deltaG0 approximately 18kT of MscMJLR resembles more the deltaG0 = 14-19kT reported for MscL. The presence of two types of MS channels discovered in the cell envelope of M. jannaschii indicates that multiplicity of MS channels in prokaryotes is a necessary element for their survival in the habitats frequently challenged by sudden changes in osmolarity. Further functional and phylogenetic study of MS channels from all three domains of the universal phylogenetic tree may help to understand the evolution and common biophysical principles that govern mechanosensory transduction.     

Engineering covalent oligomers of the mechanosensitive channel of large conductance from Escherichia coli with native conductance and gating characteristics

To obtain a gene construct for making single substitutions per channel and to determine the quaternary structure of the mechanosensitive channel MscL from Escherichia coli, covalent oligomers (monomer to hexamer) were engineered by gene fusion; up to six copies of the mscL gene were fused in tandem. All the multimeric tandem constructs yielded functional channels with wild-type conductance and dwell times. Importantly, only the covalent pentamer opened at the same relative pressure (compared to the pressure required to open MscS) as the wild-type MscL channel. The in vivo data strongly suggest that pentameric MscL represents the functional state of the channel.     

Effects of GsMTx4 on bacterial mechanosensitive channels in inside-out patches from giant spheroplasts

GsMTx4 is a 34-residue peptide isolated from the tarantula Grammostola spatulata folded into an inhibitory cysteine knot and it selectively affects gating of some mechanosensitive channels. Here we report the effects of cytoplasmic GsMTx4 on the two bacterial channels, MscS and MscL, in giant Escherichia coli spheroplasts. In excised inside-out patches, GsMTx4 sensitized both channels to tension by increasing the opening rate and decreasing the closing rate. With ascending and descending pressure ramps, GsMTx4 increased the gating hysteresis for MscS, a consequence of slower gating kinetics. Quantitative kinetic analysis of the primary C↔O transition showed that the hysteresis is a result of the decreased closing rate. The gating barrier location relative to the open state energy well was unaffected by GsMTx4. A reconstructed energy profile suggests that the peptide prestresses the resting state of MscS, lowering the net barrier to opening and stabilizes the open conformation by ∼8 kT. In excised patches, both MscL and MscS exhibit reversible adaptation, a process separable from inactivation for MscS. GsMTx4 decreased the rate of reversible adaptation for both channels and the MscS recovery rate from the inactivation. These measurements support a mechanism where GsMTx4 binds to the lipid interface of the channel, increasing the local stress that is sensed by the channels and stabilizing the expanded conformations.     

State-stabilizing Interactions in Bacterial Mechanosensitive Channel Gating and Adaptation

We outline several principles that we believe define the gating of two bacterial mechanosensitive channels, MscL and MscS. Serving as turgor regulators in bacteria and other walled cells, these molecules are tangible models for studying conformational transitions in membrane proteins driven directly by membrane tension. MscL, a compact pentamer, reversibly opens a gigantic 30-Å pore at near-lytic tensions. MscS, a heptameric complex, exhibits transient activation of a smaller pore at moderate tensions, thereby entering a tension-insensitive inactivated state. By comparing the structures and predicted transitions in these channels, we concluded that opening is commonly achieved through tilting and outward motion of the pore-lining helices, which is kinetically limited by hydration of the pore. The intricate adaptive behavior in MscS appears to depend on specific interhelical associations and the flexibility of the pore-lining helices. We discuss physical factors that may direct the transitions and stabilize main functional states in these channels.Osmotic forces are strong, which necessitated development of osmoregulation along with the first semipermeable membrane delineating the early cell. A simple estimation shows that a 1-μm cell behaving as an ideal osmometer would sustain a downshock no stronger than 20 mm, after which membrane tension would exceed the lytic limit of 10–12 dynes/cm. Thus, a cell without a reinforcing envelope or protective valves is very vulnerable. Free-living and enteric microorganisms cycling through the soil and experiencing drastic environmental changes developed robust mechanisms to maintain volume and integrity (1). The mechanosensitive channels MscS and MscL (mechanosensitive channels of small and large conductance, respectively) have been identified as primary osmolyte release valves limiting the turgor pressure under acute osmotic shock (2–4).Without mscS and mscL genes, Escherichia coli survives a 300 mosm osmotic downshock (2), its resistance attributed to the peptidoglycan layer partially restraining swelling. However, expression of either MscS or MscL allows cells to withstand a 700–800 mosm downshock through release of small osmolytes (2). Purification and reconstitution proved that MscL and MscS respond directly to tension in the lipid bilayer (5–7). Both channels reside in the inner (cytoplasmic) membrane (8), with MscL localized at the cell poles, bearing high curvature (9).As primary components of the turgor regulation system, E. coli MscS and MscL became convenient models for studies of tension-driven conformational transitions in membrane proteins (10). The crystal structures of closed-state Mycobacterium tuberculosis MscL (11) and E. coli MscS in two distinct conformations (12, 13) provided invaluable initial points to explore their gating mechanisms, in which computational methods play increasingly important roles.     

Identification and Analysis of Putative Homologues of Mechanosensitive Channels in Pathogenic Protozoa

Mechanosensitive channels play important roles in the physiology of many organisms, and their dysfunction can affect cell survival. This suggests that they might be therapeutic targets in pathogenic organisms. Pathogenic protozoa lead to diseases such as malaria, dysentery, leishmaniasis and trypanosomiasis that are responsible for millions of deaths each year worldwide. We analyzed the genomes of pathogenic protozoa and show the existence within them of genes encoding putative homologues of mechanosensitive channels. Entamoeba histolytica, Leishmania spp., Trypanosoma cruzi and Trichomonas vaginalis have genes encoding homologues of Piezo channels, while most pathogenic protozoa have genes encoding homologues of mechanosensitive small-conductance (MscS) and K⁺-dependent (MscK) channels. In contrast, all parasites examined lack genes encoding mechanosensitive large-conductance (MscL), mini-conductance (MscM) and degenerin/epithelial Na⁺ (DEG/ENaC) channels. Multiple sequence alignments of evolutionarily distant protozoan, amoeban, plant, insect and vertebrate Piezo channel subunits define an absolutely conserved motif that may be involved in channel conductance or gating. MscS channels are not present in humans, and the sequences of protozoan and human homologues of Piezo channels differ substantially. This suggests the possibility for specific targeting of mechanosensitive channels of pathogens by therapeutic drugs.     

Conserved motifs in mechanosensitive channels MscL and MscS

Mechanosensitive (MS) channels play a major role in protecting bacterial cells against hypo-osmotic shock. To understand their function, it is important to identify the conserved motifs using sequence analysis methods. In this study, the sequence conservation was investigated by an in silico analysis to generate sequence logos. We have identified new conserved motifs in the domains TM1, TM2 and the cytoplasmic helix from 231 homologs of MS channel of large conductance (MscL). In addition, we have identified new motifs for the TM3 and the cytoplasmic carboxy-terminal domain from 309 homologs of MS channel of small conductance (MscS). We found that the conservation in MscL homologs is high for TM1 and TM2 in the three domains of life. The conservation in MscS homologs is high only for TM3 in Bacteria and Archaea. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

From membrane tension to channel gating: A principal energy transfer mechanism for mechanosensitive channels

Mechanosensitive (MS) channels are evolutionarily conserved membrane proteins that play essential roles in multiple cellular processes, including sensing mechanical forces and regulating osmotic pressure. Bacterial MscL and MscS are two prototypes of MS channels. Numerous structural studies, in combination with biochemical and cellular data, provide valuable insights into the mechanism of energy transfer from membrane tension to gating of the channel. We discuss these data in a unified two‐state model of thermodynamics. In addition, we propose a lipid diffusion‐mediated mechanism to explain the adaptation phenomenon of MscS.     

Sensing and Responding to Membrane Tension: The Bacterial MscL Channel as a Model System

Mechanosensors are important for many life functions, including the senses of touch, balance, and proprioception; cardiovascular regulation; kidney function; and osmoregulation. Many channels from an assortment of families are now candidates for eukaryotic mechanosensors and proprioception, as well as cardiovascular regulation, kidney function, and osmoregulation. Bacteria also possess two families of mechanosensitive channels, termed MscL and MscS, that function as osmotic emergency release valves. Of the two channels, MscL is the most conserved, most streamlined in structure, and largest in conductance at 3.6 nS with a pore diameter in excess of 30 Å; hence, the structural changes required for gating are exaggerated and perhaps more easily defined. Because of these properties, as well as its tractable nature, MscL represents a excellent model for studying how a channel can sense and respond to biophysical changes of a lipid bilayer. Many of the properties of the MscL channel, such as the sensitivity to amphipaths, a helix that runs along the membrane surface and is connected to the pore via a glycine, a twisting and turning of the transmembrane domains upon gating, and the dynamic changes in membrane interactions, may be common to other candidate mechanosensors. Here we review many of these properties and discuss their structural and functional implications.     

Characterization of three novel mechanosensitive channel activities in Escherichia coli

Mechanosensitive channels sense elevated membrane tension that arises from rapid water influx occurring when cells move from high to low osmolarity environments (hypoosmotic shock). These non-specific channels in the cytoplasmic membrane release osmotically-active solutes and ions. The two major mechanosensitive channels in Escherichia coli are MscL and MscS. Deletion of both proteins severely compromises survival of hypoosmotic shock. However, like many bacteria, E. coli cells possess other MscS-type genes (kefA, ybdG, ybiO, yjeP and ynaI). Two homologs, MscK (kefA) and YbdG, have been characterized as mechanosensitive channels that play minor roles in maintaining cell integrity. Additional channel openings are occasionally observed in patches derived from mutants lacking MscS, MscK and MscL. Due to their rare occurrence, little is known about these extra pressure-induced currents or their genetic origins. Here we complete the identification of the remaining E. coli mechanosensitive channels YnaI, YbiO and YjeP. The latter is the major component of the previously described MscM activity (~300 pS), while YnaI (~100 pS) and YbiO (~1000 pS) were previously unknown. Expression of native YbiO is NaCl-specific and RpoS-dependent. A Δ7 strain was created with all seven E. coli mechanosensitive channel genes deleted. High level expression of YnaI, YbiO or YjeP proteins from a multicopy plasmid in the Δ7 strain (MJFGH) leads to substantial protection against hypoosmotic shock. Purified homologs exhibit high molecular masses that are consistent with heptameric assemblies. This work reveals novel mechanosensitive channels and discusses the regulation of their expression in the context of possible additional functions.     

Characterization of three novel mechanosensitive channel activities in Escherichia coli

Mechanosensitive channels sense elevated membrane tension that arises from rapid water influx occurring when cells move from high to low osmolarity environments (hypoosmotic shock). These non-specific channels in the cytoplasmic membrane release osmotically-active solutes and ions. The two major mechanosensitive channels in Escherichia coli are MscL and MscS. Deletion of both proteins severely compromises survival of hypoosmotic shock. However, like many bacteria, E. coli cells possess other MscS-type genes (kefA, ybdG, ybiO, yjeP and ynaI). Two homologs, MscK (kefA) and YbdG, have been characterized as mechanosensitive channels that play minor roles in maintaining cell integrity. Additional channel openings are occasionally observed in patches derived from mutants lacking MscS, MscK and MscL. Due to their rare occurrence, little is known about these extra pressure-induced currents or their genetic origins. Here we complete the identification of the remaining E. coli mechanosensitive channels YnaI, YbiO and YjeP. The latter is the major component of the previously described MscM activity (~300 pS), while YnaI (~100 pS) and YbiO (~1000 pS) were previously unknown. Expression of native YbiO is NaCl-specific and RpoS-dependent. A Δ7 strain was created with all seven E. coli mechanosensitive channel genes deleted. High level expression of YnaI, YbiO or YjeP proteins from a multicopy plasmid in the Δ7 strain (MJFGH) leads to substantial protection against hypoosmotic shock. Purified homologs exhibit high molecular masses that are consistent with heptameric assemblies. This work reveals novel mechanosensitive channels and discusses the regulation of their expression in the context of possible additional functions.     

Mechanosensitive channels: what can they do and how do they do it?

While mechanobiological processes employ diverse mechanisms, at their heart are force-induced perturbations in the structure and dynamics of molecules capable of triggering subsequent events. Among the best characterized force-sensing systems are bacterial mechanosensitive channels. These channels reflect an intimate coupling of protein conformation with the mechanics of the surrounding membrane; the membrane serves as an adaptable sensor that responds to an input of applied force and converts it into an output signal, interpreted for the cell by mechanosensitive channels. The cell can exploit this information in a number of ways: ensuring cellular viability in the presence of osmotic stress and perhaps also serving as a signal transducer for membrane tension or other functions. This review focuses on the bacterial mechanosensitive channels of large (MscL) and small (MscS) conductance and their eukaryotic homologs, with an emphasis on the outstanding issues surrounding the function and mechanism of this fascinating class of molecules.     

Managing hypoosmotic stress: aquaporins and mechanosensitive channels in Escherichia coli.

When Escherichia coli cells are subject to hypoosmotic shock they are subject to substantial flows of water that can be equivalent to a 4-5-fold increase in the pressure exerted from the cytoplasm on the membrane and peptidoglycan wall. The recently described aquaporin that facilitates rapid water movement across the cytoplasmic membrane is repressed during growth at high osmolarity. This may enable the cell to reduce the rate of pressure build up during transitions from high to low osmolarity. The presence of multiple mechanosensitive channels in the E. coli cell membrane is well documented. The recent identification of genes that inactivate the MscL and MscS channels has established their role in releasing the pressure built up by hypoosmotic shock. The isolation of specific mutations and the structural studies on MscL now pave the way to a molecular understanding of the mechanism of activation of mechanosensitive channels.