High-throughput gender identification of three Columbidae species using melting curve analysis

The objective was to perform high-throughput gender identification of three Columbidae species (Columba livia, Columba pulchricollis, and Streptopelia tranquebarica). Although the chromo-helicase-DNA binding protein (CHD)-based Griffiths P2/P8 primer set resolved the amplicon products of these species in 3% agarose gel electrophoresis, it was unsuitable for molecular gender identification using the melting curve analysis (MCA) curve for high-throughput analysis. After sequencing the CHD-Z and CHD-W genes for these species, we redesigned a female-specific CHD-W primer (dove-W) and a female/male (or CHD-Z/CHD-W)-common primer (dove-ZW) to combine with the Griffiths P2 primer to generate two PCR amplicons with different lengths (P2/dove-W and P2/dove-ZW for 252- and 104-bp, respectively). Melting temperature (Tm) values for P2/dove-W and P2/dove-ZW amplicons were determined and resolved in MCA at approximately 79.0∼79.5 and 77.5 °C, respectively. Accordingly, females contained two Tm peaks, whereas males contained one. In conclusion, melting curve analysis (MCA) using our proposed primer sets was a robust gender identification method for the three Columbidae species tested.     

High-Throughput Gender Identification of Penguin Species Using Melting Curve Analysis

Most species of penguins are sexual monomorphic and therefore it is difficult to visually identify their genders for monitoring population stability in terms of sex ratio analysis. In this study, we evaluated the suitability using melting curve analysis (MCA) for high-throughput gender identification of penguins. Preliminary test indicated that the Griffiths's P2/P8 primers were not suitable for MCA analysis. Based on sequence alignment of Chromo-Helicase-DNA binding protein (CHD)-W and CHD-Z genes from four species of penguins (Pygoscelis papua, Aptenodytes patagonicus, Spheniscus magellanicus, and Eudyptes chrysocome), we redesigned forward primers for the CHD-W/CHD-Z-common region (PGU-ZW2) and the CHD-W-specific region (PGU-W2) to be used in combination with the reverse Griffiths's P2 primer. When tested with P. papua samples, PCR using P2/PGU-ZW2 and P2/PGU-W2 primer sets generated two amplicons of 148- and 356-bp, respectively, which were easily resolved in 1.5% agarose gels. MCA analysis indicated the melting temperature (Tm) values for P2/PGU-ZW2 and P2/PGU-W2 amplicons of P. papua samples were 79.75°C–80.5°C and 81.0°C–81.5°C, respectively. Females displayed both ZW-common and W-specific Tm peaks, whereas male was positive only for ZW-common peak. Taken together, our redesigned primers coupled with MCA analysis allows precise high throughput gender identification for P. papua, and potentially for other penguin species such as A. patagonicus, S. magellanicus, and E. chrysocome as well.     

Large-scale preparation of active caspase-3 in E. coli by designing its thrombin-activatable precursors

Background

Combination of CHD (chromo-helicase-DNA binding protein)-specific polymerase chain reaction (PCR) with electrophoresis (PCR/electrophoresis) is the most common avian molecular sexing technique but it is lab-intensive and gel-required. Gender determination often fails when the difference in length between the PCR products of CHD-Z and CHD-W genes is too short to be resolved.

Results

Here, we are the first to introduce a PCR-melting curve analysis (PCR/MCA) to identify the gender of birds by genomic DNA, which is gel-free, quick, and inexpensive. Spilornis cheela hoya (S. c. hoya) and Pycnonotus sinensis (P. sinensis) were used to illustrate this novel molecular sexing technique. The difference in the length of CHD genes in S. c. hoya and P. sinensis is 13-, and 52-bp, respectively. Using Griffiths' P2/P8 primers, molecular sexing failed both in PCR/electrophoresis of S. c. hoya and in PCR/MCA of S. c. hoya and P. sinensis. In contrast, we redesigned sex-specific primers to yield 185- and 112-bp PCR products for the CHD-Z and CHD-W genes of S. c. hoya, respectively, using PCR/MCA. Using this specific primer set, at least 13 samples of S. c. hoya were examined simultaneously and the Tm peaks of CHD-Z and CHD-W PCR products were distinguished.

Conclusion

In this study, we introduced a high-throughput avian molecular sexing technique and successfully applied it to two species. This new method holds a great potential for use in high throughput sexing of other avian species, as well.     

Validation of Spilornis cheela hoya TaqMan probes for potential gender identification of many Accipitridae species

The objective of this study was to test the hypothesis that genders of Accipitridae species, with the same or similar sequences to our previously proposed Spilornis cheela hoya (S. c. hoya) chromo-helicase-DNA binding protein (CHD)-W-specific and CHD-ZW-common TaqMan probes, can be successfully determined. Eight species of Accipitridae with known genders were collected. After PCR, TA cloning, sequencing, and alignment analyses, sequence length differences of Griffiths P2/P8 PCR amplicons between CHD-Z and CHD-W genes ranged from 2 to 19 bp for these Accipitridae species, and they were unsolved in 3% agarose gel. Using our previous proposed S. c. hoya TaqMan probes, the genders of Circaetus gallicus, completely homologous to the sequences for these CHD probes, were successfully identified. With one nucleotide difference to S. c. hoya CHD-W-specific probe, gender identification of Accipiter gularis, Accipiter soloensis, Accipiter trivirgatus, Accipiter virgatus, and Butastur indicus were validated. With two nucleotide differences in the CHD-W-specific probe and one nucleotide difference in the CHD-ZW-common probe, Pernis ptilorhyncus also performed well for gender identification. In conclusion, the S. c. hoyaCHD probes, coupled with the Griffiths P2/P8 primers, were validated to provide accurate and high-throughput gender identification for many Accipitridae species.     

Evaluation of real-time PCR targeting hbb gene for Borrelia species identification

Several molecular methods have been employed for Borrelia species identification. Newly developed technology, real-time polymerase chain reaction (RT-PCR), combines simultaneous amplification, detection and differentiation of strains in one PCR run. The aim of the study was to perform and evaluate RT-PCR for Borreliaburgdorferi sensu lato species identification. Borrelia species identification was accomplished on 374 Borrelia strains using two approaches: 1.) MluI restriction of entire borrelial chromosome (MluI-large restriction fragment patterns, LRFP), and 2.) RT-PCR targeting hbb gene and specific melting temperature (Tm) detection. The results of the two molecular methods were compared. With MluI-RFLP we were able to differentiate all Borrelia species and their subtypes within particular species. RT-PCR based on Tm determination identified unique strains within the species Borreliaafzelii (Tm 66.11 °C), B. burgdorferi sensu stricto (Tm 68.18 °C), Borreliaspielmanii (Tm 59.45 °C) and Borreliavalaisiana (Tm 59.62 °C). We were not able to distinguish the last two species that shared almost identical Tm. The large majority of Borreliagarinii strains shared Tm 51.42 °C, while subtype Mlg4 was characterized by Tm 56.87 °C. Strains of Borrelialusitaniae species also were heterogeneous; human isolate had Tm 63.47 °C while two tick isolates shared Tm 61.77 °C. Differences inside hbb gene enabled differentiation of the majority of Borrelia species, and revealed two clusters within B. garinii and B. lusitaniae species, respectively, but it was not possible to distinguish B. spielmanii form B. valaisiana. The major advantage of RT-PCR was that it was easy to perform and that the results were obtained within a few hours.     

Advantage of Using Inosine at the 3′ Termini of 16S rRNA Gene Universal Primers for the Study of Microbial Diversity

To overcome the shortcomings of universal 16S rRNA gene primers 8F and 907R when studying the diversity of complex microbial communities, the 3′ termini of both primers were replaced with inosine. A comparison of the clone libraries derived using both primer sets showed seven bacterial phyla amplified by the altered primer set (8F-I/907R-I) whereas the original set amplified sequences belonging almost exclusively to Proteobacteria (95.8%). Sequences belonging to Firmicutes (42.6%) and Thermotogae (9.3%) were more abundant in a library obtained by using 8F-I/907R-I at a PCR annealing temperature of 54°C, while Proteobacteria sequences were more frequent (62.7%) in a library obtained at 50°C, somewhat resembling the result obtained using the original primer set. The increased diversity revealed by using primers 8F-I/907R-I confirms the usefulness of primers with inosine at the 3′ termini in studying the microbial diversity of environmental samples.     

Molecular phylogeny of the Pycnonotus sinensis and Pycnonotus taivanus in Taiwan based on sequence variations of nuclear CHD and mitochondrial cytochrome b genes

Sequences of the partial 293-bp nuclear Z-chromosome-linked chromo-helicase binding protein (CHD-Z) and 729-bp mitochondrial cytochrome b (cyt b) genes were obtained from two species of the same family Pycnonotidae of Pycnonotus sinensis (P. sinensis, Chinese Bulbul) and Pycnonotus taivanus (P. taivanus, Taiwan Bulbul) distributed in Taiwan. A panel of 10 individuals (n = 5 for each) with unknown relationship was used to characterize single nucleotide polymorphisms (SNPs) of these genes. We identified 2 and 10 SNPs in CHD-Z and cyt b loci, respectively. Frequency of SNPs was 10 per every 1465- and 729-bp on average. Pairwise nucleotide divergences of CHD-Z and cyt b genes among 10 specimens ranged from 0 to 0.0034 and 0 to 0.0055, respectively. Phylogenetic analysis suggested that the P. taivanus group assignment based on the CHD-Z and cyt b sequences is obviously very similar to P. sinensis.     

A one-step real-time multiplex PCR for screening Y-chromosomal microdeletions without downstream amplicon size analysis

Backgound

Y-chromosomal microdeletions (YCMD) are one of the major genetic causes for non-obstructive azoospermia. Genetic testing for YCMD by multiplex polymerase chain reaction (PCR) is an established method for quick and robust screening of deletions in the AZF regions of the Y-chromosome. Multiplex PCRs have the advantage of including a control gene in every reaction and significantly reducing the number of reactions needed to screen the relevant genomic markers.

Principal Findings

The widely established “EAA/EMQN best practice guidelines for molecular diagnosis of Y-chromosomal microdeletions (2004)” were used as a basis for designing a real-time multiplex PCR system, in which the YCMD can simply be identified by their melting points. For this reason, some AZF primers were substituted by primers for regions in their genomic proximity, and the ZFX/ZFY control primer was exchanged by the AMELX/AMELY control primer. Furthermore, we substituted the classical SybrGreen I dye by the novel and high-performing DNA-binding dye EvaGreen™ and put substantial effort in titrating the primer combinations in respect to optimal melting peak separation and peak size.

Significance

With these changes, we were able to develop a platform-independent and robust real-time based multiplex PCR, which makes the need for amplicon identification by electrophoretic sizing expendable. By using an open-source system for real-time PCR analysis, we further demonstrate the applicability of automated melting point and YCMD detection.     

Regulation of Progeny Sex by Anisopteromalus calandrae (Hymenoptera: Pteromalidae) in Relation to Host Preference,Host Vulnerability and Host Size

Regulation of progeny sex by Anisopteromalus calandrae (Howard) in relation to host preference, host vulnerability and host size was studied with two host species, Sitophilus oryzae (L.) and Callosobruchus chinensis L. A. calandrae preferred S. oryzae to C. chinensis (preference index = 0.87). The progeny sex ratio (females/total) was significantly higher on C. chinensis, the less preferred host, than on S. oryzae regardless of the instar age of the two host species. A. calandrae could locate only a few young larvae of C. chinensis (≤third instar), which could be apparently due to the low vulnerability of the young larvae locating deeper in the adzuki bean kernels. The larval instar age of Sitophilus oryzae affect the progeny sex ratio of A. calandrae, but that of Callosobruchus chinensis did not except invulnerable ones. The progeny sex ratio of A. calandrae produced from C. chinensis, ranged from 0.66±0.05 to 0.82±0.02. The invulnerability of the young larval instar of C. chinensis and regulation of the progeny sex ratio by A. calandrae based on host size in a manner of absolute rule could explain the higher sex ratio on the young larval instar of C. chinensis, less preferred and less vulnerable host, than the old larval instar of S. oryzae, highly preferred host. The differences in host vulnerability could be another factor for A. calandrae assigning progeny sex ratio.     

Rapid Development of Microsatellite Markers for Callosobruchus chinensis Using Illumina Paired-End Sequencing

Background

The adzuki bean weevil, Callosobruchus chinensis L., is one of the most destructive pests of stored legume seeds such as mungbean, cowpea, and adzuki bean, which usually cause considerable loss in the quantity and quality of stored seeds during transportation and storage. However, a lack of genetic information of this pest results in a series of genetic questions remain largely unknown, including population genetic structure, kinship, biotype abundance, and so on. Co-dominant microsatellite markers offer a great resolving power to determine these events. Here, we report rapid microsatellite isolation from C. chinensis via high-throughput sequencing.

Principal Findings

In this study, 94,560,852 quality-filtered and trimmed reads were obtained for the assembly of genome using Illumina paired-end sequencing technology. In total, the genome with total length of 497,124,785 bp, comprising 403,113 high quality contigs was generated with de novo assembly. More than 6800 SSR loci were detected and a suit of 6303 primer pair sequences were designed and 500 of them were randomly selected for validation. Of these, 196 pair of primers, i.e. 39.2%, produced reproducible amplicons that were polymorphic among 8 C. chinensis genotypes collected from different geographical regions. Twenty out of 196 polymorphic SSR markers were used to analyze the genetic diversity of 18 C. chinensis populations. The results showed the twenty SSR loci were highly polymorphic among these populations.

Conclusions

This study presents a first report of genome sequencing and de novo assembly for C. chinensis and demonstrates the feasibility of generating a large scale of sequence information and SSR loci isolation by Illumina paired-end sequencing. Our results provide a valuable resource for C. chinensis research. These novel markers are valuable for future genetic mapping, trait association, genetic structure and kinship among C. chinensis.     

Multiplex quantitative PCR using self-quenched primers labeled with a single fluorophore

Multiplex quantitative PCR based on novel design of fluorescent primers is described. Fluorogenic primers are labeled with a single fluorophore on a base close to the 3′ end with no quencher required. A tail of 5–7 nt is added to the 5′ end of the primer to form a blunt-end hairpin when the primer is not incorporated into a PCR product. This design provides a low initial fluorescence of the primers that increases up to 8-fold upon formation of the PCR product. The hairpin oligonucleotides (ΔG from –1.6 to –5.8 kcal/mol) may be as efficient as linear primers and provide additional specificity to the PCR by preventing primer-dimers and mispriming. Multiple fluorogenic primers were designed by specialized software and used for real-time quantitation of c-myc and IL-4 cDNAs in the presence of reference genes such as β-actin, GAPDH and 18S rRNA. Targets of 10–10⁷ copies were detected with precision in PCR using FAM-labeled primers for variable genes and JOE-labeled primers for the reference genes. This method was also used to detect single nucleotide polymorphism of the human retinal degeneration gene by allele-specific PCR with end-point detection using a fluorescent plate reader or a UV-transilluminator. We conclude that fluorogenic mono-labeled primers are an efficient and cost-effective alternative to FRET-labeled oligonucleotides.     

Opisthorchis viverrini and Haplorchis taichui: Development of a multiplex PCR assay for their detection and differentiation using specific primers derived from HAT-RAPD

Specific primers for the detection of Opisthorchis viverrini and Haplorchis taichui were investigated by using the HAT-RAPD PCR method. Fourteen arbitrary primers (Operon Technologies) were performed for the generation of polymorphic DNA profiles. The results showed that a 319 bp fragment generated from the OPA-04 primer was expected to be O. viverrini-specific while a 256 bp fragment generated from the OPP-11 primer was considered to be H. taichui-specific. Based on each sequence data, two pairs of specific primers were designed and sequences of each primer were as follows; H. taichui; Hapt_F5′-GGCCAACGCAATCGTCATCC-3′and Hapt_R1 5′-CTCTCGACCTCCTCTAGAAT-3′ which yielded a 170 bp PCR product. For O. viverrini, OpV-1F: 5′-AATCGGGCTGCATATTGACCGAT-3′ and OpV-1R: 5′-CGGTGTTGCTTATTTTGCAGACAA-3′ which generated a 319 bp PCR product. These specific primers were tested for efficacy and specific detection for all parasites DNA samples. The results showed that 170 and 319 bp specific PCR products were generated as equivalent to positive result in H. taichui and O. viverrini, respectively by having no cross-reaction with any parasites tested. PCR conditions are recommended at 68 °C annealing temperature and with 0.5 mM magnesium chloride (Mg Cl₂). Additionally, specific primers developed in this study were effective to determine the presence of both parasites in fish and snail intermediate hosts, which the DNA of O. viverrini was artificially spiked since it is rarely found in northern Thailand.The H. taichui and O. viverrini-specific primers successfully developed in this study can be use for epidemiological monitoring, preventing management and control programs.     

Identification of male-specific SNP markers and development of PCR-based genetic sex identification technique in crucifix crab (Charybdis feriatus) with implication of an XX/XY sex determination system

In this study, we first identified male-specific SNP markers using restriction site-associated DNA sequencing, and further developed a PCR-based sex identification technique for Charybdis feriatus. A total of 296.96 million clean reads were obtained, with 114.95 and 182.01 million from females and males. After assembly and alignment, 10 SNP markers were identified being heterozygous in males but homozygous in females. Five markers were further confirmed to be male-specific in a large number of individuals. Moreover, two male-specific sense primers and a common antisense primer were designed, using which, a PCR-based genetic sex identification method was successfully developed and used to identify the sex of 103 individuals, with a result of 49 females and 54 males. The presence of male-specific SNP markers suggests an XX/XY sex determination system for C. feriatus. These findings should be helpful for better understanding sex determination mechanism, and drafting artificial breeding program in crustaceans.     

Introduction of a thermophile-sourced ion pair network in the fourth beta/alpha unit of a psychophile-derived triosephosphate isomerase from Methanococcoides burtonii significantly increases its kinetic thermal stability

Hyperthermophile proteins commonly have higher numbers of surface ionic interactions than homologous proteins from other domains of life. PfuTIM, a triosephosphate isomerase (TIM) from the hyperthermophile archaeon, Pyrococcus furiosus, contains an intricate network of 4 ion pairs in its 4th beta/alpha unit, (β/α)4, whereas MbuTIM, a triosephosphate isomerase from a psychrophile archaeon, Methanococcoides burtonii, lacks this network. Notably, (β/α)4 is the first element of the structure formed during folding of certain TIM-type (beta/alpha)8 barrel proteins. Previously, we have shown that elimination of PfuTIM's ion pair network in PfuTIM significantly decreases its kinetic structural stability. Here, we describe the reciprocal experiment in which this ion pair network is introduced into MbuTIM, to produce MutMbuTIM. Recombinant MbuTIM displays multi-state unfolding with apparent Tm values of autonomous structural elements approaching, or above, 70 °C, when a temperature scanning rate of 90 °C/h is used. The protein displays significant intrinsic kinetic stability, i.e., there is a marked temperature scan rate-dependence of the Tm values associated with unfolding transitions. The Tm values drop by as much as ~ 10 °C when the temperature scanning rate is lowered to 5 °C/h. MutMbuTIM, incorporating PfuTIM's ion pair network, shows significantly higher apparent Tm values (raised by 4–6 °C over those displayed by MbuTIM). MutMbuTIM also displays significantly higher kinetic thermal stability. Thus, it appears that the thermal stability of triosephosphate isomerase can be increased, or decreased, by either enhancing, or reducing, the strength of ion pair interactions stabilizing (β/α)4, presumably through reduced cooperativity (and increased autonomy) in unfolding transitions.     

Specific and Sensitive Detection of Ralstonia solanacearum in Soil on the Basis of PCR Amplification of fliC Fragments

Ralstonia solanacearum is the causative agent of bacterial wilt in many important crops. A specific and sensitive PCR detection method that uses primers targeting the gene coding for the flagella subunit, fliC, was established. Based on the first fliC gene sequence of R. solanacearum strain K60 available at GenBank, the Ral_fliC PCR primer system was designed; this system yielded a single 724-bp product with the DNAs of all of the R. solanacearum strains tested. However, R. pickettii and four environmental Ralstonia isolates also yielded amplicons. The Ral_fliC PCR products obtained with 12 strains (R. solanacearum, R. pickettii, and environmental isolates) were sequenced. By sequence alignment, Rsol_fliC primers specific for R. solanacearum were designed. With this primer system, a specific 400-bp PCR product was obtained from all 82 strains of R. solanacearum tested. Six strains of R. pickettii and several closely related environmental isolates yielded no PCR product; however, a product was obtained with one Pseudomonas syzygii strain. A GC-clamped 400-bp fliC product could be separated in denaturing gradient gels and allowed us to distinguish P. syzygii from R. solanacearum. The Rsol_fliC PCR system was applied to detect R. solanacearum in soil. PCR amplification, followed by Southern blot hybridization, allowed us to detect about one target DNA molecule per PCR, which is equivalent to 10³ CFU g of bulk soil⁻¹. The system was applied to survey soils from different geographic origins for the presence of R. solanacearum.     

一种用于优化PCR引物设计的短链DNA熔点分析方法

目前,PCR引物设计主要依赖于软件对引物熔点的模拟计算,而PCR退火条件的优化需进行不同条件下的扩增实验。为开发一种可高效、精确评价引物和确定退火条件的方法,本研究采用高分辨率熔解曲线（high resolution melting,HRM）测定技术直接分析短链DNA的熔点,用于引物优劣性的评价,并为退火条件的优化提供参考。本文用HRM法直接测定了非完全互补的双链DNA以及DNA发卡结构的熔点,结果显示：（1）与完全互补的双链DNA相比,较为稳定的单碱基错配A?G、G?G和T?G的熔点只降低2℃ ~ 3℃,部分双碱基错配的熔点只降低4℃ ~ 6℃,单碱基突出熔点只降低4℃~ 5℃。因此,如果采用的退火温度不当,部分错配的非目的模板可能会被扩增。（2）即使发卡结构的茎干区只有6 bp,当其环区碱基少于10 nt时,其熔点也可达到60℃以上。此外,环区的长度对发卡熔点也有较大影响。根据本研究结果发现,引物设计时应尽量避免模板引物结合区同其邻近的30 nt碱基有6 bp以上的互补部分。综上所述,本研究证明HRM熔点法是一种高效评价引物及确定退火温度的方法。     

Conserved PCR primer set designing for closely-related species to complete mitochondrial genome sequencing using a sliding window-based PSO algorithm

Background

Complete mitochondrial (mt) genome sequencing is becoming increasingly common for phylogenetic reconstruction and as a model for genome evolution. For long template sequencing, i.e., like the entire mtDNA, it is essential to design primers for Polymerase Chain Reaction (PCR) amplicons which are partly overlapping each other. The presented chromosome walking strategy provides the overlapping design to solve the problem for unreliable sequencing data at the 5′ end and provides the effective sequencing. However, current algorithms and tools are mostly focused on the primer design for a local region in the genomic sequence. Accordingly, it is still challenging to provide the primer sets for the entire mtDNA.

Methodology/Principal Findings

The purpose of this study is to develop an integrated primer design algorithm for entire mt genome in general, and for the common primer sets for closely-related species in particular. We introduce ClustalW to generate the multiple sequence alignment needed to find the conserved sequences in closely-related species. These conserved sequences are suitable for designing the common primers for the entire mtDNA. Using a heuristic algorithm particle swarm optimization (PSO), all the designed primers were computationally validated to fit the common primer design constraints, such as the melting temperature, primer length and GC content, PCR product length, secondary structure, specificity, and terminal limitation. The overlap requirement for PCR amplicons in the entire mtDNA is satisfied by defining the overlapping region with the sliding window technology. Finally, primer sets were designed within the overlapping region. The primer sets for the entire mtDNA sequences were successfully demonstrated in the example of two closely-related fish species. The pseudo code for the primer design algorithm is provided.

Conclusions/Significance

In conclusion, it can be said that our proposed sliding window-based PSO algorithm provides the necessary primer sets for the entire mt genome amplification and sequencing.     

Differentiating Coptis chinensis from Coptis japonica and other Coptis species used in Coptidis Rhizoma based on partial trnL-F intergenic spacer sequences

Dried rhizomes of Coptis species are utilized as “Coptidis Rhizoma” (CR), an important herbal medicinal material in traditional Chinese medicine. Almost all CRs traded in the Korean herbal medicine market originate from Coptis chinensis (“Chun Hwang-Lyun” in Korean medical terminology). Other minor CRs originate from Coptis japonica (“Il Hwang-Lyun”). Although there is an obvious discrepancy in the price of traded CRs in the herbal market depending on the Coptis species, CRs originating from C. chinensis and C. japonica are often confused. Furthermore, the CR traded as “Chun Hwang-Lyun” is occasionally mixed with rhizomes of Coptis deltoidea and/or Coptis omeiensis. Therefore, we sought to discriminate C. chinensis from C. japonica, as well as C. deltoidea and C. omeiensis, by using nucleotide sequence differences in the partial trnL-F intergenic spacer. We developed an efficient real-time polymerase chain reaction (PCR)-based discrimination assay to separate samples of C. chinensis from those of C. japonica without the need to separate the DNA markers by using gel electrophoresis. In addition, we developed a multiplex PCR method with which we were able to discriminate samples of C. chinensis from those of C. deltoidea and C. omeiensis by amplifying the 153-bp DNA marker in C. chinensis in a single PCR process.     

CHARACTERIZATION OF GENETIC MARKERS LINKED TO SEX DETERMINATION IN THE HAPLOID‐DIPLOID RED ALGA GRACILARIA CHILENSIS1

Bulk segregant analysis, random amplified polymorphic DNA (RAPD), and sequence characterized amplified region (SCAR) methods were used to identify sex‐linked molecular markers in the haploid‐diploid rhodophyte Gracilaria chilensis C. J. Bird, McLachlan et E. C. Oliveira. One hundred and eighty 10 bp primers were tested on three bulks of DNA: haploid males, haploid females, and diploid tetrasporophytes. Three RAPD primers (OPD15, OPG16, and OPN20) produced male‐specific bands; and one RAPD primer (OPD12), a female‐specific band. The sequences of the cloned putative sex‐specific PCR fragments were used to design specific primers for the female marker SCAR‐D12‐386 and the male marker SCAR‐G16‐486. Both SCAR markers gave unequivocal band patterns that allowed sex and phase to be determined in G. chilensis. Thus, all the females presented only the female band, and all the males only the male band, while all the tetrasporophytes amplified both male and female bands. Despite this sex‐specific association, we were able to amplify SCAR‐D12‐386 and SCAR‐G16‐486 in both sexes at low melting temperature. The differences between male and female sequences were of 8%–9% nucleotide divergence for SCAR‐D12‐386 and SCAR‐G16‐486, respectively. SCAR‐D12‐386 and SCAR‐G16‐486 could represent degenerated or diverged sequences located in the nonrecombining region of incipient sex chromosomes or heteromorphic sex chromosomes with sequence differences at the DNA level such that PCR primers amplify only one allele and not the other in highly specific PCR conditions. Seven gametic progenies composed of 19 males, 19 females, and the seven parental tetrasporophytes were analyzed. In all of them, the two SCAR markers segregated perfectly with sexual phenotypes.